• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ IS_MCAST函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中IS_MCAST函数的典型用法代码示例。如果您正苦于以下问题:C++ IS_MCAST函数的具体用法?C++ IS_MCAST怎么用?C++ IS_MCAST使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了IS_MCAST函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: peer_config

/*
 * peer_config - configure a new association
 */
struct peer *
peer_config(
	sockaddr_u *	srcadr,
	const char *	hostname,
	endpt *		dstadr,
	u_char		hmode,
	u_char		version,
	u_char		minpoll,
	u_char		maxpoll,
	u_int		flags,
	u_int32		ttl,
	keyid_t		key,
	const char *	ident		/* autokey group */
	)
{
	u_char cast_flags;

	/*
	 * We do a dirty little jig to figure the cast flags. This is
	 * probably not the best place to do this, at least until the
	 * configure code is rebuilt. Note only one flag can be set.
	 */
	switch (hmode) {
	case MODE_BROADCAST:
		if (IS_MCAST(srcadr))
			cast_flags = MDF_MCAST;
		else
			cast_flags = MDF_BCAST;
		break;

	case MODE_CLIENT:
		if (hostname != NULL && SOCK_UNSPEC(srcadr))
			cast_flags = MDF_POOL;
		else if (IS_MCAST(srcadr))
			cast_flags = MDF_ACAST;
		else
			cast_flags = MDF_UCAST;
		break;

	default:
		cast_flags = MDF_UCAST;
	}

	/*
	 * Mobilize the association and initialize its variables. If
	 * emulating ntpdate, force iburst.  For pool and manycastclient
	 * strip FLAG_PREEMPT as the prototype associations are not
	 * themselves preemptible, though the resulting associations
	 * are.
	 */
	flags |= FLAG_CONFIG;
	if (mode_ntpdate)
		flags |= FLAG_IBURST;
	if ((MDF_ACAST | MDF_POOL) & cast_flags)
		flags &= ~FLAG_PREEMPT;
	return newpeer(srcadr, hostname, dstadr, hmode, version,
	    minpoll, maxpoll, flags, cast_flags, ttl, key, ident);
}
开发者ID:VargMon,项目名称:netbsd-cvs-mirror,代码行数:61,代码来源:ntp_peer.c


示例2: rtw_hal_mgnt_xmit

/*
 * [IMPORTANT] This function would be run in interrupt context.
 */
s32	rtw_hal_mgnt_xmit(struct adapter *padapter, struct xmit_frame *pmgntframe)
{
	s32 ret = _FAIL;
	update_mgntframe_attrib_addr(padapter, pmgntframe);
	/* pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET; */
	/* pwlanhdr = (struct rtw_ieee80211_hdr *)pframe; */
	/* memcpy(pmgntframe->attrib.ra, pwlanhdr->addr1, ETH_ALEN); */

	if (padapter->securitypriv.binstallBIPkey == true)
	{
		if (IS_MCAST(pmgntframe->attrib.ra))
		{
			pmgntframe->attrib.encrypt = _BIP_;
			/* pmgntframe->attrib.bswenc = true; */
		}
		else
		{
			pmgntframe->attrib.encrypt = _AES_;
			pmgntframe->attrib.bswenc = true;
		}
		rtw_mgmt_xmitframe_coalesce(padapter, pmgntframe->pkt, pmgntframe);
	}

	if (padapter->HalFunc.mgnt_xmit)
		ret = padapter->HalFunc.mgnt_xmit(padapter, pmgntframe);
	return ret;
}
开发者ID:SylasMc,项目名称:rtl8723bs,代码行数:30,代码来源:hal_intf.c


示例3: rtw_hal_mgnt_xmit

/*
 * [IMPORTANT] This function would be run in interrupt context.
 */
s32	rtw_hal_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe)
{
	s32 ret = _FAIL;
	unsigned char	*pframe;
	struct rtw_ieee80211_hdr	*pwlanhdr;
	update_mgntframe_attrib_addr(padapter, pmgntframe);
	//pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
	//pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
	//_rtw_memcpy(pmgntframe->attrib.ra, pwlanhdr->addr1, ETH_ALEN);

#ifdef CONFIG_IEEE80211W
	if(padapter->securitypriv.binstallBIPkey == _TRUE)
	{
		if(IS_MCAST(pmgntframe->attrib.ra))
		{
			pmgntframe->attrib.encrypt = _BIP_;
			//pmgntframe->attrib.bswenc = _TRUE;
		}	
		else
		{
			pmgntframe->attrib.encrypt = _AES_;
			pmgntframe->attrib.bswenc = _TRUE;
		}
		rtw_mgmt_xmitframe_coalesce(padapter, pmgntframe->pkt, pmgntframe);
	}
#endif //CONFIG_IEEE80211W
	
	if(padapter->HalFunc.mgnt_xmit)
		ret = padapter->HalFunc.mgnt_xmit(padapter, pmgntframe);
	return ret;
}
开发者ID:austinmarton,项目名称:rtl8812au_linux,代码行数:34,代码来源:hal_intf.c


示例4: UpdateEarlyModeInfo8192D

void UpdateEarlyModeInfo8192D(_adapter *padapter, struct xmit_frame *pxmitframe,struct tx_servq	*ptxservq)
{
	_irqL irqL;
	u32	len;
	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
	_list *xmitframe_plist = NULL, *xmitframe_phead = NULL;

	//Some macaddr can't do early mode.
	if(MacAddr_isBcst(pattrib->dst) ||IS_MCAST(pattrib->dst) || !!pattrib->qos_en)
		return;

	pxmitframe->EMPktNum = 0;

	// dequeue same priority packet from station tx queue
	_enter_critical_bh(&pxmitpriv->lock, &irqL);

	xmitframe_phead = get_list_head(&ptxservq->sta_pending);
	xmitframe_plist = get_next(xmitframe_phead);
	while ((rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist) == _FALSE)&&(pxmitframe->EMPktNum < 5))
	{
		pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list);
		xmitframe_plist = get_next(xmitframe_plist);

		len = xmitframe_need_length(pxmitframe);
		pxmitframe->EMPktLen[pxmitframe->EMPktNum] = len;
		pxmitframe->EMPktNum++;
	}
	_exit_critical_bh(&pxmitpriv->lock, &irqL);

}
开发者ID:davidftv,项目名称:s82_kernel,代码行数:31,代码来源:rtl8192du_xmit.c


示例5: restrict_source

/*
 * restrict_source - maintains dynamic "restrict source ..." entries as
 *		     peers come and go.
 */
void
restrict_source(
	sockaddr_u *	addr,
	int		farewell,	/* 0 to add, 1 to remove */
	u_long		expire		/* 0 is infinite, valid until */
	)
{
	sockaddr_u	onesmask;
	restrict_u *	res;
	int		found_specific;

	if (!restrict_source_enabled || SOCK_UNSPEC(addr) ||
	    IS_MCAST(addr) || ISREFCLOCKADR(addr))
		return;

	REQUIRE(AF_INET == AF(addr) || AF_INET6 == AF(addr));

	SET_HOSTMASK(&onesmask, AF(addr));
	if (farewell) {
		hack_restrict(RESTRICT_REMOVE, addr, &onesmask,
			      0, 0, 0);
		DPRINTF(1, ("restrict_source: %s removed", stoa(addr)));
		return;
	}

	/*
	 * If there is a specific entry for this address, hands
	 * off, as it is condidered more specific than "restrict
	 * server ...".
	 * However, if the specific entry found is a fleeting one
	 * added by pool_xmit() before soliciting, replace it
	 * immediately regardless of the expire value to make way
	 * for the more persistent entry.
	 */
	if (IS_IPV4(addr)) {
		res = match_restrict4_addr(SRCADR(addr), SRCPORT(addr));
		INSIST(res != NULL);
		found_specific = (SRCADR(&onesmask) == res->u.v4.mask);
	} else {
		res = match_restrict6_addr(&SOCK_ADDR6(addr),
					   SRCPORT(addr));
		INSIST(res != NULL);
		found_specific = ADDR6_EQ(&res->u.v6.mask,
					  &SOCK_ADDR6(&onesmask));
	}
	if (!expire && found_specific && res->expire) {
		found_specific = 0;
		free_res(res, IS_IPV6(addr));
	}
	if (found_specific)
		return;

	hack_restrict(RESTRICT_FLAGS, addr, &onesmask,
		      restrict_source_mflags, restrict_source_flags,
		      expire);
	DPRINTF(1, ("restrict_source: %s host restriction added\n", 
		    stoa(addr)));
}
开发者ID:cemeyer,项目名称:freebsd-base-graphics,代码行数:62,代码来源:ntp_restrict.c


示例6: while

/* any station allocated can be searched by hash list */
struct sta_info *rtw_get_stainfo(struct sta_priv *pstapriv, u8 *hwaddr)
{

    _irqL	 irqL;

    _list	*plist, *phead;

    struct sta_info *psta = NULL;

    u32	index;

    u8 *addr;

    u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff};

    _func_enter_;

    if(hwaddr==NULL)
        return NULL;

    if(IS_MCAST(hwaddr))
    {
        addr = bc_addr;
    }
    else
    {
        addr = hwaddr;
    }

    index = wifi_mac_hash(addr);

    _enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);

    phead = &(pstapriv->sta_hash[index]);
    plist = get_next(phead);


    while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
    {

        psta = LIST_CONTAINOR(plist, struct sta_info, hash_list);

        if ((_rtw_memcmp(psta->hwaddr, addr, ETH_ALEN))== _TRUE)
        {   // if found the matched address
            break;
        }
        psta=NULL;
        plist = get_next(plist);
    }

    _exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);
    _func_exit_;
    return psta;

}
开发者ID:riteshSTPL,项目名称:buildroot-linux-kernel-m3,代码行数:56,代码来源:rtw_sta_mgt.c


示例7: odm_RefreshRateAdaptiveMaskCE

VOID
odm_RefreshRateAdaptiveMaskCE(
	IN	PVOID	pDM_VOID
	)
{
	PDM_ODM_T		pDM_Odm = (PDM_ODM_T)pDM_VOID;
	u1Byte	i;
	PADAPTER	pAdapter	 =  pDM_Odm->Adapter;
	PODM_RATE_ADAPTIVE		pRA = &pDM_Odm->RateAdaptive;

	if(pAdapter->bDriverStopped)
	{
		ODM_RT_TRACE(pDM_Odm, ODM_COMP_RA_MASK, ODM_DBG_TRACE, ("<---- odm_RefreshRateAdaptiveMask(): driver is going to unload\n"));
		return;
	}

	if(!pDM_Odm->bUseRAMask)
	{
		ODM_RT_TRACE(pDM_Odm, ODM_COMP_RA_MASK, ODM_DBG_LOUD, ("<---- odm_RefreshRateAdaptiveMask(): driver does not control rate adaptive mask\n"));
		return;
	}

	for(i=0; i<ODM_ASSOCIATE_ENTRY_NUM; i++){
		PSTA_INFO_T pstat = pDM_Odm->pODM_StaInfo[i];
		if(IS_STA_VALID(pstat) ) {
			if(IS_MCAST( pstat->hwaddr))  //if(psta->mac_id ==1)
				 continue;
			if(IS_MCAST( pstat->hwaddr))
				continue;

			if( TRUE == ODM_RAStateCheck(pDM_Odm, pstat->rssi_stat.UndecoratedSmoothedPWDB, FALSE , &pstat->rssi_level) )
			{
				ODM_RT_TRACE(pDM_Odm, ODM_COMP_RA_MASK, ODM_DBG_LOUD, ("RSSI:%d, RSSI_LEVEL:%d\n", pstat->rssi_stat.UndecoratedSmoothedPWDB, pstat->rssi_level));
				rtw_hal_update_ra_mask(pstat, pstat->rssi_level);
			}
		}
	}
}
开发者ID:dosgo,项目名称:rtl8723bu,代码行数:38,代码来源:odm_RaInfo.c


示例8:

/* any station allocated can be searched by hash list */
struct sta_info *rtw_get_stainfo(struct sta_priv *pstapriv, u8 *hwaddr)
{
	_list	*plist, *phead;
	struct sta_info *psta = NULL;
	u32	index;
	u8 *addr;
	u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff};

_func_enter_;

	if(hwaddr==NULL)
		return NULL;

	if(IS_MCAST(hwaddr))
	{
		addr = bc_addr;
	}
	else
	{
		addr = hwaddr;
	}

	index = wifi_mac_hash(addr);

	spin_lock_bh(&pstapriv->sta_hash_lock);

	phead = &(pstapriv->sta_hash[index]);
	plist = get_next(phead);


	while (phead != plist)
	{

		psta = LIST_CONTAINOR(plist, struct sta_info, hash_list);

		if ((!memcmp(psta->hwaddr, addr, ETH_ALEN)))
		{ // if found the matched address
			break;
		}
		psta=NULL;
		plist = get_next(plist);
	}

	spin_unlock_bh(&pstapriv->sta_hash_lock);
_func_exit_;
	return psta;

}
开发者ID:yku-yku,项目名称:rtl8723bs,代码行数:49,代码来源:rtw_sta_mgt.c


示例9: rtw_update_txdesc

s32 rtw_update_txdesc(struct xmit_frame *pxmitframe, u32 *pmem, s32 sz)
{
	int pull=0;
	uint qsel;
	_adapter		*padapter = pxmitframe->padapter;
	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;		
	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
	struct tx_desc	*ptxdesc = (struct tx_desc *)pmem;
	sint bmcst = IS_MCAST(pattrib->ra);
	struct ht_priv *phtpriv = &pmlmepriv->htpriv;
	struct mlme_ext_info *pmlmeinfo = &padapter->mlmeextpriv.mlmext_info;

	if(urb_zero_packet_chk(padapter, sz)==0)
	{
		ptxdesc = (struct tx_desc *)(pmem+(PACKET_OFFSET_SZ>>2));
		pull = 1;
	}
开发者ID:WayWingsDev,项目名称:Gplus_2159_0801,代码行数:17,代码来源:rtl8192cu_xmit.c


示例10: recvframe_chkmic

sint recvframe_chkmic(_adapter *adapter,  union recv_frame *precvframe){

	sint 			i,res=_SUCCESS;
	u32	datalen;
	u8 miccode[8];
	u8	bmic_err=_FALSE;
	u8	*pframe, *payload,*pframemic;
	u8   *mickey,idx,*iv;
	struct	sta_info		*stainfo;

	struct	rx_pkt_attrib	*prxattrib=&precvframe->u.hdr.attrib;
	struct 	security_priv	*psecuritypriv=&adapter->securitypriv;
	//struct 	recv_stat *prxstat=(struct recv_stat *)precvframe->u.hdr.rx_head;
	
_func_enter_;	
	
	stainfo=get_stainfo(&adapter->stapriv ,&prxattrib->ta[0] );

	if(prxattrib->encrypt ==_TKIP_)
        {
		RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n recvframe_chkmic:prxattrib->encrypt ==_TKIP_\n"));
		RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n recvframe_chkmic:da=0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n",
			prxattrib->ra[0],prxattrib->ra[1],prxattrib->ra[2],prxattrib->ra[3],prxattrib->ra[4],prxattrib->ra[5]));

		//calculate mic code
		if(stainfo!= NULL)
                {
			if(IS_MCAST(prxattrib->ra))
			{
                        	iv=precvframe->u.hdr.rx_data+prxattrib->hdrlen;
				idx=iv[3];
				mickey=&psecuritypriv->dot118021XGrprxmickey[(( (idx>>6)&0x3 ))-1].skey[0];

				RT_TRACE(_module_rtl871x_recv_c_,_drv_info_,("\n recvframe_chkmic: bcmc key \n"));
				if(psecuritypriv->binstallGrpkey==_FALSE)
                                {
					res=_FAIL;
					RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,("\n recvframe_chkmic:didn't install group key!!!!!!!!!!\n"));
					goto exit;
				}
			}
			else{
开发者ID:OpenHMR,项目名称:Open-HMR600,代码行数:42,代码来源:rtl871x_recv.c


示例11: rtw_hal_mgnt_xmit

/*
 * [IMPORTANT] This function would be run in interrupt context.
 */
s32	rtw_hal_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe)
{
	s32 ret = _FAIL;
	u8	*pframe, subtype;
	struct rtw_ieee80211_hdr	*pwlanhdr;
	struct sta_info	*psta;
	struct sta_priv		*pstapriv = &padapter->stapriv;
	
	update_mgntframe_attrib_addr(padapter, pmgntframe);
	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
	subtype = GetFrameSubType(pframe); /* bit(7)~bit(2) */
	
	//pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
	//_rtw_memcpy(pmgntframe->attrib.ra, pwlanhdr->addr1, ETH_ALEN);

#ifdef CONFIG_IEEE80211W
	if (padapter->securitypriv.binstallBIPkey == _TRUE && (subtype == WIFI_DEAUTH || subtype == WIFI_DISASSOC ||
			subtype == WIFI_ACTION))
	{
		if (IS_MCAST(pmgntframe->attrib.ra) && pmgntframe->attrib.key_type != IEEE80211W_NO_KEY) {
			pmgntframe->attrib.encrypt = _BIP_;
			/* pmgntframe->attrib.bswenc = _TRUE; */
		} else if (pmgntframe->attrib.key_type != IEEE80211W_NO_KEY) {
			psta = rtw_get_stainfo(pstapriv, pmgntframe->attrib.ra);
			if (psta && psta->bpairwise_key_installed == _TRUE) {
				pmgntframe->attrib.encrypt = _AES_;
				pmgntframe->attrib.bswenc = _TRUE;
			} else {
				DBG_871X("%s, %d, bpairwise_key_installed is FALSE\n", __func__, __LINE__);
				goto no_mgmt_coalesce;
			}
		}
		DBG_871X("encrypt=%d, bswenc=%d\n", pmgntframe->attrib.encrypt, pmgntframe->attrib.bswenc);
		rtw_mgmt_xmitframe_coalesce(padapter, pmgntframe->pkt, pmgntframe);
	}
#endif //CONFIG_IEEE80211W
no_mgmt_coalesce:
	ret = padapter->HalFunc.mgnt_xmit(padapter, pmgntframe);
	return ret;
}
开发者ID:ConiKost,项目名称:rtl88XXAU,代码行数:43,代码来源:hal_intf.c


示例12:

/* any station allocated can be searched by hash list */
struct sta_info *rtw_get_stainfo(struct sta_priv *pstapriv, u8 *hwaddr)
{
	struct list_head	*plist, *phead;
	struct sta_info *psta = NULL;
	u32 index;
	u8 *addr;
	u8 bc_addr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};

	if (!hwaddr)
		return NULL;

	if (IS_MCAST(hwaddr))
		addr = bc_addr;
	else
		addr = hwaddr;

	index = wifi_mac_hash(addr);

	spin_lock_bh(&pstapriv->sta_hash_lock);

	phead = &(pstapriv->sta_hash[index]);
	plist = get_next(phead);


	while (phead != plist) {

		psta = LIST_CONTAINOR(plist, struct sta_info, hash_list);

		if ((!memcmp(psta->hwaddr, addr, ETH_ALEN)))
		 /*  if found the matched address */
			break;

		psta = NULL;
		plist = get_next(plist);
	}

	spin_unlock_bh(&pstapriv->sta_hash_lock);
	return psta;
}
开发者ID:avagin,项目名称:linux,代码行数:40,代码来源:rtw_sta_mgt.c


示例13: r8712_xmit_classifier

/*
 * Will enqueue pxmitframe to the proper queue, and indicate it
 * to xx_pending list.....
 */
sint r8712_xmit_classifier(struct _adapter *padapter,
			   struct xmit_frame *pxmitframe)
{
	unsigned long irqL0;
	struct  __queue *pstapending;
	struct sta_info	*psta;
	struct tx_servq	*ptxservq;
	struct pkt_attrib *pattrib = &pxmitframe->attrib;
	struct sta_priv *pstapriv = &padapter->stapriv;
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	sint bmcst = IS_MCAST(pattrib->ra);

	if (pattrib->psta) {
		psta = pattrib->psta;
	} else {
		if (bmcst) {
			psta = r8712_get_bcmc_stainfo(padapter);
		} else {
			if (check_fwstate(pmlmepriv, WIFI_MP_STATE))
				psta = r8712_get_stainfo(pstapriv,
				       get_bssid(pmlmepriv));
			else
				psta = r8712_get_stainfo(pstapriv, pattrib->ra);
		}
	}
	if (psta == NULL)
		return _FAIL;
	ptxservq = get_sta_pending(padapter, &pstapending,
		   psta, pattrib->priority);
	spin_lock_irqsave(&pstapending->lock, irqL0);
	if (list_empty(&ptxservq->tx_pending))
		list_add_tail(&ptxservq->tx_pending, &pstapending->queue);
	list_add_tail(&pxmitframe->list, &ptxservq->sta_pending.queue);
	ptxservq->qcnt++;
	spin_unlock_irqrestore(&pstapending->lock, irqL0);
	return _SUCCESS;
}
开发者ID:Anjali05,项目名称:linux,代码行数:41,代码来源:rtl871x_xmit.c


示例14: fill_txdesc_for_mp

void fill_txdesc_for_mp(struct xmit_frame *pxmitframe, struct tx_desc *ptxdesc)
{		
#ifdef CONFIG_MP_INCLUDED

		struct pkt_attrib	*pattrib = &pxmitframe->attrib;
		sint bmcst = IS_MCAST(pattrib->ra);

		if (pattrib->pctrl == 1) // mp tx packets
		{

			struct tx_desc txdesc, *ptxdesc_mp;
			struct pkt_file pktfile;

			ptxdesc_mp = &txdesc;
			_rtw_open_pktfile(pxmitframe->pkt, &pktfile);
			_rtw_pktfile_read(&pktfile, NULL, ETH_HLEN);
			_rtw_pktfile_read(&pktfile, (u8*)ptxdesc_mp, TXDESC_SIZE);

			//offset 8
			ptxdesc->txdw2 = cpu_to_le32(ptxdesc_mp->txdw2);
			if (bmcst) ptxdesc->txdw2 |= cpu_to_le32(BMC);
			ptxdesc->txdw2 |= cpu_to_le32(BK);	
			//RT_TRACE(_module_rtl871x_xmit_c_,_drv_alert_,("mp pkt offset8-txdesc=0x%8x\n", ptxdesc->txdw2));			

			ptxdesc->txdw4 = cpu_to_le32(ptxdesc_mp->txdw4);
			//RT_TRACE(_module_rtl871x_xmit_c_,_drv_alert_,("mp pkt offset16-txdesc=0x%8x\n", ptxdesc->txdw4));

			//offset 20
			ptxdesc->txdw5 = cpu_to_le32(ptxdesc_mp->txdw5);
			//RT_TRACE(_module_rtl871x_xmit_c_,_drv_alert_,("mp pkt offset20-txdesc=0x%8x\n", ptxdesc->txdw5));				

			pattrib->pctrl = 0;//reset to zero;				
		}
		
#endif
}
开发者ID:WayWingsDev,项目名称:Gplus_2159_0801,代码行数:36,代码来源:rtl8192cu_xmit.c


示例15: rtl8812au_hostap_mgnt_xmit_entry

s32 rtl8812au_hostap_mgnt_xmit_entry(_adapter *padapter, _pkt *pkt)
{
#ifdef PLATFORM_LINUX
	u16 fc;
	int rc, len, pipe;	
	unsigned int bmcst, tid, qsel;
	struct sk_buff *skb, *pxmit_skb;
	struct urb *urb;
	unsigned char *pxmitbuf;
	struct tx_desc *ptxdesc;
	struct rtw_ieee80211_hdr *tx_hdr;
	struct hostapd_priv *phostapdpriv = padapter->phostapdpriv;	
	struct net_device *pnetdev = padapter->pnetdev;
	HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
	struct dvobj_priv *pdvobj = adapter_to_dvobj(padapter);	

	
	//DBG_8192C("%s\n", __FUNCTION__);

	skb = pkt;
	
	len = skb->len;
	tx_hdr = (struct rtw_ieee80211_hdr *)(skb->data);
	fc = le16_to_cpu(tx_hdr->frame_ctl);
	bmcst = IS_MCAST(tx_hdr->addr1);

	if ((fc & RTW_IEEE80211_FCTL_FTYPE) != RTW_IEEE80211_FTYPE_MGMT)
		goto _exit;

	pxmit_skb = rtw_skb_alloc(len + TXDESC_SIZE);

	if(!pxmit_skb)
		goto _exit;

	pxmitbuf = pxmit_skb->data;

	urb = usb_alloc_urb(0, GFP_ATOMIC);
	if (!urb) {
		goto _exit;
	}

	// ----- fill tx desc -----	
	ptxdesc = (struct tx_desc *)pxmitbuf;	
	_rtw_memset(ptxdesc, 0, sizeof(*ptxdesc));
		
	//offset 0	
	ptxdesc->txdw0 |= cpu_to_le32(len&0x0000ffff); 
	ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<<OFFSET_SHT)&0x00ff0000);//default = 32 bytes for TX Desc
	ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG);

	if(bmcst)	
	{
		ptxdesc->txdw0 |= cpu_to_le32(BIT(24));
	}	

	//offset 4	
	ptxdesc->txdw1 |= cpu_to_le32(0x00);//MAC_ID

	ptxdesc->txdw1 |= cpu_to_le32((0x12<<QSEL_SHT)&0x00001f00);

	ptxdesc->txdw1 |= cpu_to_le32((0x06<< 16) & 0x000f0000);//b mode

	//offset 8			

	//offset 12		
	ptxdesc->txdw3 |= cpu_to_le32((le16_to_cpu(tx_hdr->seq_ctl)<<16)&0xffff0000);

	//offset 16		
	ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate
		
	//offset 20


	//HW append seq
	ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); // Hw set sequence number
	ptxdesc->txdw3 |= cpu_to_le32((8 <<28)); //set bit3 to 1. Suugested by TimChen. 2009.12.29.
	

	rtl8188eu_cal_txdesc_chksum(ptxdesc);
	// ----- end of fill tx desc -----

	//
	skb_put(pxmit_skb, len + TXDESC_SIZE);
	pxmitbuf = pxmitbuf + TXDESC_SIZE;
	_rtw_memcpy(pxmitbuf, skb->data, len);

	//DBG_8192C("mgnt_xmit, len=%x\n", pxmit_skb->len);


	// ----- prepare urb for submit -----
	
	//translate DMA FIFO addr to pipehandle
	//pipe = ffaddr2pipehdl(pdvobj, MGT_QUEUE_INX);
	pipe = usb_sndbulkpipe(pdvobj->pusbdev, pHalData->Queue2EPNum[(u8)MGT_QUEUE_INX]&0x0f);
	
	usb_fill_bulk_urb(urb, pdvobj->pusbdev, pipe,
			  pxmit_skb->data, pxmit_skb->len, rtl8192cu_hostap_mgnt_xmit_cb, pxmit_skb);
	
	urb->transfer_flags |= URB_ZERO_PACKET;
	usb_anchor_urb(urb, &phostapdpriv->anchored);
//.........这里部分代码省略.........
开发者ID:AndyPi,项目名称:rtl8812au_rtl8821au,代码行数:101,代码来源:rtl8812au_xmit.c


示例16: rtw_recv_indicatepkt

int rtw_recv_indicatepkt(struct adapter *padapter,
			 struct recv_frame *precv_frame)
{
	struct recv_priv *precvpriv;
	struct __queue *pfree_recv_queue;
	struct sk_buff *skb;
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;


	precvpriv = &(padapter->recvpriv);
	pfree_recv_queue = &(precvpriv->free_recv_queue);

	skb = precv_frame->pkt;
	if (!skb) {
		RT_TRACE(_module_recv_osdep_c_, _drv_err_,
			 ("rtw_recv_indicatepkt():skb == NULL something wrong!!!!\n"));
		goto _recv_indicatepkt_drop;
	}

	RT_TRACE(_module_recv_osdep_c_, _drv_info_,
		 ("rtw_recv_indicatepkt():skb != NULL !!!\n"));
	RT_TRACE(_module_recv_osdep_c_, _drv_info_,
		 ("rtw_recv_indicatepkt():precv_frame->rx_head =%p  precv_frame->hdr.rx_data =%p\n",
		 precv_frame->rx_head, precv_frame->rx_data));
	RT_TRACE(_module_recv_osdep_c_, _drv_info_,
		 ("precv_frame->hdr.rx_tail =%p precv_frame->rx_end =%p precv_frame->hdr.len =%d\n",
		 precv_frame->rx_tail, precv_frame->rx_end,
		 precv_frame->len));

	skb->data = precv_frame->rx_data;

	skb_set_tail_pointer(skb, precv_frame->len);

	skb->len = precv_frame->len;

	RT_TRACE(_module_recv_osdep_c_, _drv_info_,
		 ("skb->head =%p skb->data =%p skb->tail =%p skb->end =%p skb->len =%d\n",
		 skb->head, skb->data, skb_tail_pointer(skb),
		 skb_end_pointer(skb), skb->len));

	if (check_fwstate(pmlmepriv, WIFI_AP_STATE)) {
		struct sk_buff *pskb2 = NULL;
		struct sta_info *psta = NULL;
		struct sta_priv *pstapriv = &padapter->stapriv;
		struct rx_pkt_attrib *pattrib = &precv_frame->attrib;
		int bmcast = IS_MCAST(pattrib->dst);

		if (memcmp(pattrib->dst, myid(&padapter->eeprompriv),
			   ETH_ALEN)) {
			if (bmcast) {
				psta = rtw_get_bcmc_stainfo(padapter);
				pskb2 = skb_clone(skb, GFP_ATOMIC);
			} else {
				psta = rtw_get_stainfo(pstapriv, pattrib->dst);
			}

			if (psta) {
				struct net_device *pnetdev;

				pnetdev = (struct net_device *)padapter->pnetdev;
				skb->dev = pnetdev;
				skb_set_queue_mapping(skb, rtw_recv_select_queue(skb));

				rtw_xmit_entry(skb, pnetdev);

				if (bmcast)
					skb = pskb2;
				else
					goto _recv_indicatepkt_end;
			}
		}
	}

	rcu_read_lock();
	rcu_dereference(padapter->pnetdev->rx_handler_data);
	rcu_read_unlock();

	skb->ip_summed = CHECKSUM_NONE;
	skb->dev = padapter->pnetdev;
	skb->protocol = eth_type_trans(skb, padapter->pnetdev);

	netif_rx(skb);

_recv_indicatepkt_end:

	/*  pointers to NULL before rtw_free_recvframe() */
	precv_frame->pkt = NULL;

	rtw_free_recvframe(precv_frame, pfree_recv_queue);

	RT_TRACE(_module_recv_osdep_c_, _drv_info_,
		 ("\n rtw_recv_indicatepkt :after netif_rx!!!!\n"));


	return _SUCCESS;

_recv_indicatepkt_drop:

	 /* enqueue back to free_recv_queue */
	rtw_free_recvframe(precv_frame, pfree_recv_queue);
//.........这里部分代码省略.........
开发者ID:513855417,项目名称:linux,代码行数:101,代码来源:recv_linux.c


示例17: update_txdesc

static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz ,u8 bagg_pkt)
{	
      int	pull=0;
	uint	qsel;
	u8 data_rate,pwr_status,offset;
	_adapter			*padapter = pxmitframe->padapter;
	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;		
	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	u8	*ptxdesc =  pmem;
	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
	sint	bmcst = IS_MCAST(pattrib->ra);

#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX 
	if (padapter->registrypriv.mp_mode == 0)
	{
		if((PACKET_OFFSET_SZ != 0) && (!bagg_pkt) &&(rtw_usb_bulk_size_boundary(padapter,TXDESC_SIZE+sz)==_FALSE))
		{
			ptxdesc = (pmem+PACKET_OFFSET_SZ);
			//DBG_8192C("==> non-agg-pkt,shift pointer...\n");
			pull = 1;
		}
	}
#endif	// CONFIG_USE_USB_BUFFER_ALLOC_TX

	_rtw_memset(ptxdesc, 0, TXDESC_SIZE);
	
        //4 offset 0
	SET_TX_DESC_FIRST_SEG_8812(ptxdesc, 1);
	SET_TX_DESC_LAST_SEG_8812(ptxdesc, 1);
	SET_TX_DESC_OWN_8812(ptxdesc, 1);
		
	//DBG_8192C("%s==> pkt_len=%d,bagg_pkt=%02x\n",__FUNCTION__,sz,bagg_pkt);
	SET_TX_DESC_PKT_SIZE_8812(ptxdesc, sz);
	
	offset = TXDESC_SIZE + OFFSET_SZ;		

#ifdef CONFIG_TX_EARLY_MODE	
	if(bagg_pkt){		
		offset += EARLY_MODE_INFO_SIZE ;//0x28			
	}
#endif
	//DBG_8192C("%s==>offset(0x%02x)  \n",__FUNCTION__,offset);
	SET_TX_DESC_OFFSET_8812(ptxdesc, offset);

	if (bmcst) {
		SET_TX_DESC_BMC_8812(ptxdesc, 1);
	}

#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
	if (padapter->registrypriv.mp_mode == 0)
	{
		if((PACKET_OFFSET_SZ != 0) && (!bagg_pkt)){
			if((pull) && (pxmitframe->pkt_offset>0)) {	
				pxmitframe->pkt_offset = pxmitframe->pkt_offset -1;		
			}
		}
	}	
#endif

	//DBG_8192C("%s, pkt_offset=0x%02x\n",__FUNCTION__,pxmitframe->pkt_offset);
	// pkt_offset, unit:8 bytes padding
	if (pxmitframe->pkt_offset > 0) {
		SET_TX_DESC_PKT_OFFSET_8812(ptxdesc, pxmitframe->pkt_offset);
	}

	SET_TX_DESC_MACID_8812(ptxdesc, pattrib->mac_id);
	SET_TX_DESC_RATE_ID_8812(ptxdesc, pattrib->raid);

	SET_TX_DESC_QUEUE_SEL_8812(ptxdesc,  pattrib->qsel);

	//offset 12

	if (!pattrib->qos_en) {
		SET_TX_DESC_HWSEQ_EN_8812(ptxdesc, 1); // Hw set sequence number
	} else {
		SET_TX_DESC_SEQ_8812(ptxdesc, pattrib->seqnum);
	}

	if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG)
	{
		//DBG_8192C("pxmitframe->frame_tag == DATA_FRAMETAG\n");		

		rtl8812a_fill_txdesc_sectype(pattrib, ptxdesc);

		//offset 20
#ifdef CONFIG_USB_TX_AGGREGATION
		if (pxmitframe->agg_num > 1){
			//DBG_8192C("%s agg_num:%d\n",__FUNCTION__,pxmitframe->agg_num );
			SET_TX_DESC_USB_TXAGG_NUM_8812(ptxdesc, pxmitframe->agg_num);
		}
#endif

		rtl8812a_fill_txdesc_vcs(padapter, pattrib, ptxdesc);

		if ((pattrib->ether_type != 0x888e) &&
		    (pattrib->ether_type != 0x0806) &&
		    (pattrib->ether_type != 0x88b4) &&
//.........这里部分代码省略.........
开发者ID:AndyPi,项目名称:rtl8812au_rtl8821au,代码行数:101,代码来源:rtl8812au_xmit.c


示例18: rtw_os_recv_indicate_pkt

void rtw_os_recv_indicate_pkt(_adapter *padapter, _pkt *pkt, struct rx_pkt_attrib *pattrib)
{
	struct mlme_priv*pmlmepriv = &padapter->mlmepriv;
	int ret;

	/* Indicat the packets to upper layer */
	if (pkt) {
		if (check_fwstate(pmlmepriv, WIFI_AP_STATE) == true)
		{
			_pkt *pskb2 =NULL;
			struct sta_info *psta = NULL;
			struct sta_priv *pstapriv = &padapter->stapriv;
			int bmcast = IS_MCAST(pattrib->dst);

			/* DBG_871X("bmcast =%d\n", bmcast); */

			if (memcmp(pattrib->dst, myid(&padapter->eeprompriv), ETH_ALEN))
			{
				/* DBG_871X("not ap psta =%p, addr =%pM\n", psta, pattrib->dst); */

				if (bmcast)
				{
					psta = rtw_get_bcmc_stainfo(padapter);
					pskb2 = rtw_skb_clone(pkt);
				} else {
					psta = rtw_get_stainfo(pstapriv, pattrib->dst);
				}

				if (psta)
				{
					struct net_device *pnetdev = (struct net_device*)padapter->pnetdev;

					/* DBG_871X("directly forwarding to the rtw_xmit_entry\n"); */

					/* skb->ip_summed = CHECKSUM_NONE; */
					pkt->dev = pnetdev;
					skb_set_queue_mapping(pkt, rtw_recv_select_queue(pkt));

					_rtw_xmit_entry(pkt, pnetdev);

					if (bmcast && (pskb2 != NULL)) {
						pkt = pskb2;
						DBG_COUNTER(padapter->rx_logs.os_indicate_ap_mcast);
					} else {
						DBG_COUNTER(padapter->rx_logs.os_indicate_ap_forward);
						return;
					}
				}
			}
			else/*  to APself */
			{
				/* DBG_871X("to APSelf\n"); */
				DBG_COUNTER(padapter->rx_logs.os_indicate_ap_self);
			}
		}

		pkt->protocol = eth_type_trans(pkt, padapter->pnetdev);
		pkt->dev = padapter->pnetdev;

#ifdef CONFIG_TCP_CSUM_OFFLOAD_RX
		if ((pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1)) {
			pkt->ip_summed = CHECKSUM_UNNECESSARY;
		} else {
			pkt->ip_summed = CHECKSUM_NONE;
		}
#else /* !CONFIG_TCP_CSUM_OFFLOAD_RX */
		pkt->ip_summed = CHECKSUM_NONE;
#endif /* CONFIG_TCP_CSUM_OFFLOAD_RX */

		ret = rtw_netif_rx(padapter->pnetdev, pkt);
		if (ret == NET_RX_SUCCESS)
			DBG_COUNTER(padapter->rx_logs.os_netif_ok);
		else
			DBG_COUNTER(padapter->rx_logs.os_netif_err);
	}
}
开发者ID:jasonabele,项目名称:rtl8723bs,代码行数:76,代码来源:recv_linux.c


示例19: usb_write_port

u32 usb_write_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *wmem)
{    
	_irqL irqL;
	unsigned int pipe;
	int status;
	u32 ret = _FAIL, bwritezero = _FALSE;
	PURB	purb = NULL;
	_adapter *padapter = (_adapter *)pintfhdl->padapter;
	struct dvobj_priv	*pdvobj = adapter_to_dvobj(padapter);	
	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
	struct xmit_buf *pxmitbuf = (struct xmit_buf *)wmem;
	struct xmit_frame *pxmitframe = (struct xmit_frame *)pxmitbuf->priv_data;
	struct usb_device *pusbd = pdvobj->pusbdev;
	struct pkt_attrib *pattrib = &pxmitframe->attrib;
	
_func_enter_;	
	
	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("+usb_write_port\n"));
	
	if ((padapter->bDriverStopped) || (padapter->bSurpriseRemoved) ||(dvobj_to_pwrctl(pdvobj)->pnp_bstop_trx)) {
		#ifdef DBG_TX
		DBG_871X(" DBG_TX %s:%d bDriverStopped%d, bSurpriseRemoved:%d, pnp_bstop_trx:%d\n",__FUNCTION__, __LINE__
			,padapter->bDriverStopped, padapter->bSurpriseRemoved, dvobj_to_pwrctl(pdvobj)->pnp_bstop_trx );
		#endif
		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port:( padapter->bDriverStopped ||padapter->bSurpriseRemoved ||pwrctl->pnp_bstop_trx)!!!\n"));
		rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_TX_DENY);
		goto exit;
	}
	
	_enter_critical(&pxmitpriv->lock, &irqL);

	switch(addr)
	{
		case VO_QUEUE_INX:
			pxmitpriv->voq_cnt++;
			pxmitbuf->flags = VO_QUEUE_INX;
			break;
		case VI_QUEUE_INX:
			pxmitpriv->viq_cnt++;
			pxmitbuf->flags = VI_QUEUE_INX;
			break;
		case BE_QUEUE_INX:
			pxmitpriv->beq_cnt++;
			pxmitbuf->flags = BE_QUEUE_INX;
			break;
		case BK_QUEUE_INX:
			pxmitpriv->bkq_cnt++;
			pxmitbuf->flags = BK_QUEUE_INX;
			break;
		case HIGH_QUEUE_INX:
			pxmitbuf->flags = HIGH_QUEUE_INX;
			break;
		default:
			pxmitbuf->flags = MGT_QUEUE_INX;
			break;
	}

	_exit_critical(&pxmitpriv->lock, &irqL);

	#ifdef DBG_TRX_STA_PKTS
	{
		struct sta_info *psta = NULL;
	 	struct sta_priv *pstapriv = &padapter->stapriv;		
		int bmcast = IS_MCAST(pattrib->dst);
		u8 agg_num = 1;
		
		#ifdef CONFIG_USB_HCI
		#ifdef CONFIG_USB_TX_AGGREGATION
			if(pxmitframe->agg_num>1)
				agg_num = pxmitframe->agg_num;
		#endif
		#endif
		
		#if defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
			if(pxmitframe->agg_num>1)
				agg_num = pxmitframe->agg_num;
		#endif

		if(bmcast)
		{
			psta = rtw_get_bcmc_stainfo(padapter);
	
		} else {
			psta = rtw_get_stainfo(pstapriv, pattrib->dst);
		}
		if(psta)
		{
			switch(pattrib->priority)
			{
				case 1:
				case 2:						
					psta->tx_bk_cnt += agg_num;
					break;
				case 4:
				case 5:					
					psta->tx_vi_cnt += agg_num;					
					break;
				case 6:
				case 7:
					psta->tx_vo_cnt += agg_num;					
//.........这里部分代码省略.........
开发者ID:KuronekoDungeon,项目名称:stock_firefly-rk3288-kernel,代码行数:101,代码来源:usb_ops_linux.c


示例20: pre_recv_entry

static s32 pre_recv_entry(union recv_frame *precvframe, u8 *pphy_status)
{
	s32 ret=_SUCCESS;
#ifdef CONFIG_CONCURRENT_MODE
	u8 *secondary_myid, *paddr1;
	union recv_frame	*precvframe_if2 = NULL;
	_adapter *primary_padapter = precvframe->u.hdr.adapter;
	_adapter *secondary_padapter = primary_padapter->pbuddy_adapter;
	struct recv_priv *precvpriv = &primary_padapter->recvpriv;
	_queue *pfree_recv_queue = &precvpriv->free_recv_queue;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(primary_padapter);

	if(!secondary_padapter)
		return ret;

	paddr1 = GetAddr1Ptr(precvframe->u.hdr.rx_data);

	if(IS_MCAST(paddr1) == _FALSE)//unicast packets
	{
		secondary_myid = adapter_mac_addr(secondary_padapter);

		if(_rtw_memcmp(paddr1, secondary_myid, ETH_ALEN))
		{
			//change to secondary interface
			precvframe->u.hdr.adapter = secondary_padapter;
		}

		//ret = recv_entry(precvframe);

	}
	else // Handle BC/MC Packets
	{
		//clone/copy to if2
		_pkt	 *pkt_copy = NULL;
		struct rx_pkt_attrib *pattrib = NULL;

		precvframe_if2 = rtw_alloc_recvframe(pfree_recv_queue);

		if(!precvframe_if2)
			return _FAIL;

		precvframe_if2->u.hdr.adapter = secondary_padapter;
		_rtw_memcpy(&precvframe_if2->u.hdr.attrib, &precvframe->u.hdr.attrib, sizeof(struct rx_pkt_attrib));
		pattrib = &precvframe_if2->u.hdr.attrib;

		//driver need to set skb len for skb_copy().
		//If skb->len is zero, skb_copy() will not copy data from original skb.
		skb_put(precvframe->u.hdr.pkt, pattrib->pkt_len);

		pkt_copy = rtw_skb_copy( precvframe->u.hdr.pkt);
		if (pkt_copy == NULL)
		{
			if((pattrib->mfrag == 1)&&(pattrib->frag_num == 0))
			{
				DBG_8192C("pre_recv_entry(): rtw_skb_copy fail , drop frag frame \n");
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
				return ret;
			}

			pkt_copy = rtw_skb_clone( precvframe->u.hdr.pkt);
			if(pkt_copy == NULL)
			{
				DBG_8192C("pre_recv_entry(): rtw_skb_clone fail , drop frame\n");
				rtw_free_recvframe(precvframe, &precvpriv->free_recv_queue);
				return ret;
			}
		}

		pkt_copy->dev = secondary_padapter->pnetdev;

		precvframe_if2->u.hdr.pkt = pkt_copy;
		precvframe_if2->u.hdr.rx_head = pkt_copy->head;
		precvframe_if2->u.hdr.rx_data = pkt_copy->data;
		precvframe_if2->u.hdr.rx_tail = skb_tail_pointer(pkt_copy);
		precvframe_if2->u.hdr.rx_end = skb_end_pointer(pkt_copy);
		precvframe_if2->u.hdr.len = pkt_copy->len;

		//recvframe_put(precvframe_if2, pattrib->pkt_len);

		if ( pHalData->ReceiveConfig & RCR_APPFCS)
			recvframe_pull_tail(precvframe_if2, IEEE80211_FCS_LEN);

		if (pattrib->physt)
			rx_query_phy_status(precvframe_if2, pphy_status);

		if(rtw_recv_entry(precvframe_if2) != _SUCCESS)
		{
			RT_TRACE(_module_rtl871x_recv_c_,_drv_err_,
				("recvbuf2recvframe: rtw_recv_entry(precvframe) != _SUCCESS\n"));
		}
	}

	//if (precvframe->u.hdr.attrib.physt)
	//	rx_query_phy_status(precvframe, pphy_status);

	//ret = rtw_recv_entry(precvframe);
#endif

	return ret;

//.........这里部分代码省略.........
开发者ID:xapp-le,项目名称:kernel,代码行数:101,代码来源:usb_ops.c



注:本文中的IS_MCAST函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ IS_MOBILE函数代码示例发布时间:2022-05-30
下一篇:
C++ IS_LPTIM_INSTANCE函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap