C++ IS_PWR_WAKEUP_PIN函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中IS_PWR_WAKEUP_PIN函数的典型用法代码示例。如果您正苦于以下问题：C++ IS_PWR_WAKEUP_PIN函数的具体用法？C++ IS_PWR_WAKEUP_PIN怎么用？C++ IS_PWR_WAKEUP_PIN使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了IS_PWR_WAKEUP_PIN函数的12个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: HAL_PWR_DisableWakeUpPin

/**
  * @brief Disables the Wake-up PINx functionality.
  * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
  *         This parameter can be one of the following values:
  *           @arg PWR_WAKEUP_PIN1
  *           @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx devices
  *           @arg PWR_WAKEUP_PIN3 available only on STM32F410xx devices
  * @retval None
  */
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
{
  /* Check the parameter */
  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));  

  /* Disable the wake up pin */
  CLEAR_BIT(PWR->CSR, WakeUpPinx);
}

开发者ID:Lone-L，项目名称:ECSE426_Final_Project，代码行数:17，代码来源:stm32f4xx_hal_pwr.c

示例2: HAL_PWR_EnableWakeUpPin

/**
  * @brief  Enable the WakeUp PINx functionality.
  * @param  WakeUpPinPolarity: Specifies which Wake-Up pin to enable.
  *          This parameter can be one of the following legacy values, which sets the default:
  *          polarity detection on high level (rising edge):
  *            @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4,
  *                 PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6 or one of the following values where
  *                 the user can explicitly states the enabled pin and the chosen polarity.
  *            @arg PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW
  *            @arg PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW
  *            @arg PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW
  *            @arg PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW
  *            @arg PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW
  *            @arg PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW
  * @note   PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent.
  * @retval None
  */
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity)
{
  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity));

  /* Enable and Specify the Wake-Up pin polarity and the pull configuration
     for the event detection (rising or falling edge) */
  MODIFY_REG(PWR->WKUPEPR, PWR_EWUP_MASK, WakeUpPinPolarity);
}

开发者ID:pichenettes，项目名称:stmlib，代码行数:25，代码来源:stm32h7xx_hal_pwr.c

示例3: HAL_PWR_DisableWakeUpPin

/**
  * @brief Disables the WakeUp PINx functionality.
  * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
  *         This parameter can be one of the following values:
  *           @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3
  * @retval None
  */
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
{
  __IO uint32_t tmp = 0;
  
  /* Check the parameters */
  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
  tmp = CSR_EWUP1_BB + (WakeUpPinx << 2);
  *(__IO uint32_t *) (tmp) = (uint32_t)DISABLE;
}

开发者ID:alexeystn，项目名称:stm32-ppm-usb-adapter，代码行数:16，代码来源:stm32f3xx_hal_pwr.c

示例4: HAL_PWR_EnableWakeUpPin

/**
  * @brief Enable the WakeUp PINx functionality.
  * @param WakeUpPinPolarity: Specifies which Wake-Up pin to enable.
  *         This parameter can be one of the following legacy values, which sets the default polarity: 
  *         detection on high level (rising edge):
  *           @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6 
  *         or one of the following value where the user can explicitly states the enabled pin and
  *         the chosen polarity  
  *           @arg PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW 
  *           @arg PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW 
  *           @arg PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW 
  *           @arg PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW
  *           @arg PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW 
  *           @arg PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW 
  * @note  PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent.               
  * @retval None
  */
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity)
{
  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity));
  
  /* Enable wake-up pin */
  SET_BIT(PWR->CSR2, (PWR_EWUP_MASK & WakeUpPinPolarity));
	
  /* Specifies the Wake-Up pin polarity for the event detection
    (rising or falling edge) */
  MODIFY_REG(PWR->CR2, (PWR_EWUP_MASK & WakeUpPinPolarity), (WakeUpPinPolarity >> 0x06));
}

开发者ID:BryantDai，项目名称:stm32，代码行数:28，代码来源:stm32f7xx_hal_pwr.c

示例5: HAL_PWR_EnableWakeUpPin

/**
  * @brief Enable the WakeUp PINx functionality.
  * @param WakeUpPinPolarity: Specifies which Wake-Up pin to enable.
  *         This parameter can be one of the following legacy values which set the default polarity 
  *         i.e. detection on high level (rising edge):
  *           @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5
  *             
  *         or one of the following value where the user can explicitly specify the enabled pin and
  *         the chosen polarity:  
  *           @arg @ref PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW 
  *           @arg @ref PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW 
  *           @arg @ref PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW 
  *           @arg @ref PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW
  *           @arg @ref PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW 
  * @note  PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent.               
  * @retval None
  */
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity)
{
  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity)); 
  
  /* Specifies the Wake-Up pin polarity for the event detection 
    (rising or falling edge) */
  MODIFY_REG(PWR->CR4, (PWR_CR3_EWUP & WakeUpPinPolarity), (WakeUpPinPolarity >> PWR_WUP_POLARITY_SHIFT)); 
    
  /* Enable wake-up pin */
  SET_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinPolarity));

    
}

开发者ID:asebak，项目名称:IMU，代码行数:30，代码来源:stm32l4xx_hal_pwr.c

示例6: PWR_WakeUpPinCmd

/**
  * @brief  Enables or disables the WakeUp Pin functionality.
  * @param  PWR_WakeUpPin: specifies the WakeUpPin.
  *   This parameter can be: PWR_WakeUpPin_1, PWR_WakeUpPin_2 or PWR_WakeUpPin_3.
  * @param  NewState: new state of the WakeUp Pin functionality.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPin, FunctionalState NewState)
{
  __IO uint32_t tmp = 0;
  
  /* Check the parameters */
  assert_param(IS_PWR_WAKEUP_PIN(PWR_WakeUpPin));
  
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  tmp = CSR_EWUP_BB + PWR_WakeUpPin;
  
  *(__IO uint32_t *) (tmp) = (uint32_t)NewState;
}

开发者ID:Tokifuko，项目名称:all-my-projects，代码行数:21，代码来源:stm32l1xx_pwr.c

示例7: PWR_WakeUpPinCmd

/**
  * @brief  Enables or disables the WakeUp Pin functionality.
  * @param  PWR_WakeUpPinx: specifies the WakeUp Pin.
  *          This parameter can be one of the following values:
  *            @arg PWR_WakeUp_Pin1: WKUP1 pin is used for wakeup from Standby mode.
  *            @arg PWR_WakeUp_Pin2: WKUP2 pin is used for wakeup from Standby mode.
  * @param  NewState: new state of the WakeUp Pin functionality.
  *         This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPinx, FunctionalState NewState)
{
  /* Check the parameters */  
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  assert_param(IS_PWR_WAKEUP_PIN(NewState));
  if(PWR_WakeUpPinx == PWR_WakeUp_Pin1)
  {
    *(__IO uint32_t *) CSR_EWUP1_BB = (uint32_t)NewState;
  }
  else /* PWR_WakeUp_Pin1 */
  {
    *(__IO uint32_t *) CSR_EWUP2_BB = (uint32_t)NewState;
  }
}

开发者ID:0xBADCA7，项目名称:lk，代码行数:24，代码来源:stm32f4xx_pwr.c

示例8: PWR_WakeUpPinCmd

/**
  * @brief  Enables or disables the WakeUp Pin functionality.
  * @param  PWR_WakeUpPin: specifies the WakeUpPin.
  *          This parameter can be: PWR_WakeUpPin_1, PWR_WakeUpPin_2 or PWR_WakeUpPin_3.
  * @param  NewState: new state of the WakeUp Pin functionality.
  *          This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPin, FunctionalState NewState)
{
	/* Check the parameters */
	assert_param(IS_PWR_WAKEUP_PIN(PWR_WakeUpPin));
	assert_param(IS_FUNCTIONAL_STATE(NewState));

	if (NewState != DISABLE) {
		/* Enable the EWUPx pin */
		PWR->CSR |= PWR_WakeUpPin;
	} else {
		/* Disable the EWUPx pin */
		PWR->CSR &= ~PWR_WakeUpPin;
	}
}

开发者ID:suxiaocheng，项目名称:stm32_usb_hid，代码行数:22，代码来源:stm32f37x_pwr.c

示例9: PWR_WakeUpPinCmd

/**
  * @brief  Enables or disables the WakeUp Pin functionality.
  * @param  PWR_WakeUpPinx: specifies the WakeUp Pin.
  *          This parameter can be one of the following values:
  *            @arg PWR_WakeUp_Pin1: WKUP1 pin is used for wakeup from Standby mode.
  *            @arg PWR_WakeUp_Pin2: WKUP2 pin is used for wakeup from Standby mode.
  *            @arg PWR_WakeUp_Pin3: WKUP3 pin is used for wakeup from Standby mode.(only for STM32F410xx and STM32F412xG Devices)
  * @param  NewState: new state of the WakeUp Pin functionality.
  *         This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPinx, FunctionalState NewState)
{
  /* Check the parameters */  
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  assert_param(IS_PWR_WAKEUP_PIN(NewState));
  if(PWR_WakeUpPinx == PWR_WakeUp_Pin1) /* PWR_WakeUp_Pin1 */
  {
    *(__IO uint32_t *) CSR_EWUP1_BB = (uint32_t)NewState;
  }
#if defined(STM32F410xx)|| defined(STM32F412xG)  
  else if(PWR_WakeUpPinx == PWR_WakeUp_Pin3) /* PWR_WakeUp_Pin3 */
  {
    *(__IO uint32_t *) CSR_EWUP3_BB = (uint32_t)NewState;
  }
#endif /* STM32F410xx */  
  else /* PWR_WakeUp_Pin2 */
  {
    *(__IO uint32_t *) CSR_EWUP2_BB = (uint32_t)NewState;
  }
}

开发者ID:Grigoryan1，项目名称:Test-Project，代码行数:31，代码来源:stm32f4xx_pwr.c

示例10: HAL_PWR_DisableWakeUpPin

/**
  * @brief Disables the WakeUp PINx functionality.
  * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
  *         This parameter can be one of the following values:
  *           @arg PWR_WAKEUP_PIN1
  *           @arg PWR_WAKEUP_PIN2
  *           @arg PWR_WAKEUP_PIN3
  *           @arg PWR_WAKEUP_PIN4
  *           @arg PWR_WAKEUP_PIN5
  *           @arg PWR_WAKEUP_PIN6 
  * @retval None
  */
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
{
  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));

  CLEAR_BIT(PWR->CSR2, WakeUpPinx);
}

开发者ID:BryantDai，项目名称:stm32，代码行数:18，代码来源:stm32f7xx_hal_pwr.c

示例11: HAL_PWR_DisableWakeUpPin

/**
  * @brief Disables the WakeUp PINx functionality.
  * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
  *         This parameter can be one of the following values:
  *           @arg PWR_WAKEUP_PIN1
  * @retval None
  */
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
{
  /* Check the parameter */
  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));  
  *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)DISABLE;
}

开发者ID:19emtuck，项目名称:micropython，代码行数:13，代码来源:stm32f4xx_hal_pwr.c

示例12: HAL_PWR_DisableWakeUpPin

/**
  * @brief Disables the WakeUp PINx functionality.
  * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
  *         This parameter can be values of :
  *           @ref PWREx_WakeUp_Pins
  * @retval None
  */
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
{
  /* Check the parameters */
  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
  PWR->CSR &= ~(PWR_CSR_EWUP1 << (uint8_t)WakeUpPinx);
}

开发者ID:Atmango，项目名称:mastering-stm32，代码行数:13，代码来源:stm32f0xx_hal_pwr.c

注：本文中的IS_PWR_WAKEUP_PIN函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ IS_RC_MODE_ACTIVE函数代码示例发布时间：2022-05-30

C++ IS_PWR_STOP_ENTRY函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18254|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9672|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8455|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7861|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ IS_PWR_WAKEUP_PIN函数代码示例

示例1: HAL_PWR_DisableWakeUpPin

示例2: HAL_PWR_EnableWakeUpPin

示例3: HAL_PWR_DisableWakeUpPin

示例4: HAL_PWR_EnableWakeUpPin

示例5: HAL_PWR_EnableWakeUpPin

示例6: PWR_WakeUpPinCmd

示例7: PWR_WakeUpPinCmd

示例8: PWR_WakeUpPinCmd

示例9: PWR_WakeUpPinCmd

示例10: HAL_PWR_DisableWakeUpPin

示例11: HAL_PWR_DisableWakeUpPin

示例12: HAL_PWR_DisableWakeUpPin

请发表评论

全部评论

上一篇：

下一篇：

微信小程序——获取元素的宽高等属性

librespeed/speedtest: Self-hosted Speedt

CVE-2022-34549

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053