C++ IS_SMC函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中IS_SMC函数的典型用法代码示例。如果您正苦于以下问题：C++ IS_SMC函数的具体用法？C++ IS_SMC怎么用？C++ IS_SMC使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了IS_SMC函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: cpm_uart_request_port

/*
 * Initialize port. This is called from early_console stuff
 * so we have to be careful here !
 */
static int cpm_uart_request_port(struct uart_port *port)
{
	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
	int ret;

	pr_debug("CPM uart[%d]:request port\n", port->line);

	if (pinfo->flags & FLAG_CONSOLE)
		return 0;

	if (IS_SMC(pinfo)) {
		pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
		pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
	} else {
		pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
		pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
	}

	ret = cpm_uart_allocbuf(pinfo, 0);

	if (ret)
		return ret;

	cpm_uart_initbd(pinfo);
	if (IS_SMC(pinfo))
		cpm_uart_init_smc(pinfo);
	else
		cpm_uart_init_scc(pinfo);

	return 0;
}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:35，代码来源:cpm_uart_core.c

示例2: cpm_uart_start_tx

/*
 * Start transmitter
 */
static void cpm_uart_start_tx(struct uart_port *port)
{
	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
	volatile smc_t *smcp = pinfo->smcp;
	volatile scc_t *sccp = pinfo->sccp;

	pr_debug("CPM uart[%d]:start tx\n", port->line);

	if (IS_SMC(pinfo)) {
		if (smcp->smc_smcm & SMCM_TX)
			return;
	} else {
		if (sccp->scc_sccm & UART_SCCM_TX)
			return;
	}

	if (cpm_uart_tx_pump(port) != 0) {
		if (IS_SMC(pinfo)) {
			smcp->smc_smcm |= SMCM_TX;
			smcp->smc_smcmr |= SMCMR_TEN;
		} else {
			sccp->scc_sccm |= UART_SCCM_TX;
			pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT;
		}
	}
}

开发者ID:ena30，项目名称:snake-os，代码行数:29，代码来源:cpm_uart_core.c

示例3: cpm_uart_startup

static int cpm_uart_startup(struct uart_port *port)
{
	int retval;
	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;

	pr_debug("CPM uart[%d]:startup\n", port->line);

	/* If the port is not the console, make sure rx is disabled. */
	if (!(pinfo->flags & FLAG_CONSOLE)) {
		/* Disable UART rx */
		if (IS_SMC(pinfo)) {
			clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN);
			clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX);
		} else {
			clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR);
			clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
		}
		cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
	}
	/* Install interrupt handler. */
	retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port);
	if (retval)
		return retval;

	/* Startup rx-int */
	if (IS_SMC(pinfo)) {
		setbits8(&pinfo->smcp->smc_smcm, SMCM_RX);
		setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN));
	} else {
		setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
		setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT));
	}

	return 0;
}

开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:35，代码来源:cpm_uart_core.c

示例4: cpm_uart_console_setup

/*
 * Setup console. Be careful is called early !
 */
static int __init cpm_uart_console_setup(struct console *co, char *options)
{
	struct uart_port *port;
	struct uart_cpm_port *pinfo;
	int baud = 38400;
	int bits = 8;
	int parity = 'n';
	int flow = 'n';
	int ret;

	port =
	    (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
	pinfo = (struct uart_cpm_port *)port;

	pinfo->flags |= FLAG_CONSOLE;

	if (options) {
		uart_parse_options(options, &baud, &parity, &bits, &flow);
	} else {
		bd_t *bd = (bd_t *) __res;

		if (bd->bi_baudrate)
			baud = bd->bi_baudrate;
		else
			baud = 9600;
	}

	/*
	 * Setup any port IO, connect any baud rate generators,
	 * etc.  This is expected to be handled by board
	 * dependant code
	 */
	if (pinfo->set_lineif)
		pinfo->set_lineif(pinfo);

	if (IS_SMC(pinfo)) {
		pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
		pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
	} else {
		pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
		pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
	}

	ret = cpm_uart_allocbuf(pinfo, 1);

	if (ret)
		return ret;

	cpm_uart_initbd(pinfo);

	if (IS_SMC(pinfo))
		cpm_uart_init_smc(pinfo);
	else
		cpm_uart_init_scc(pinfo);

	uart_set_options(port, co, baud, parity, bits, flow);

	return 0;
}

开发者ID:ena30，项目名称:snake-os，代码行数:62，代码来源:cpm_uart_core.c

示例5: cpm_uart_int

/*
 * Asynchron mode interrupt handler
 */
static irqreturn_t cpm_uart_int(int irq, void *data)
{
	u8 events;
	struct uart_port *port = data;
	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
	smc_t __iomem *smcp = pinfo->smcp;
	scc_t __iomem *sccp = pinfo->sccp;

	pr_debug("CPM uart[%d]:IRQ\n", port->line);

	if (IS_SMC(pinfo)) {
		events = in_8(&smcp->smc_smce);
		out_8(&smcp->smc_smce, events);
		if (events & SMCM_BRKE)
			uart_handle_break(port);
		if (events & SMCM_RX)
			cpm_uart_int_rx(port);
		if (events & SMCM_TX)
			cpm_uart_int_tx(port);
	} else {
		events = in_be16(&sccp->scc_scce);
		out_be16(&sccp->scc_scce, events);
		if (events & UART_SCCM_BRKE)
			uart_handle_break(port);
		if (events & UART_SCCM_RX)
			cpm_uart_int_rx(port);
		if (events & UART_SCCM_TX)
			cpm_uart_int_tx(port);
	}
	return (events) ? IRQ_HANDLED : IRQ_NONE;
}

开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:34，代码来源:cpm_uart_core.c

示例6: cpm_uart_int

/*
 * Asynchron mode interrupt handler
 */
static irqreturn_t cpm_uart_int(int irq, void *data)
{
	u8 events;
	struct uart_port *port = (struct uart_port *)data;
	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
	volatile smc_t *smcp = pinfo->smcp;
	volatile scc_t *sccp = pinfo->sccp;

	pr_debug("CPM uart[%d]:IRQ\n", port->line);

	if (IS_SMC(pinfo)) {
		events = smcp->smc_smce;
		smcp->smc_smce = events;
		if (events & SMCM_BRKE)
			uart_handle_break(port);
		if (events & SMCM_RX)
			cpm_uart_int_rx(port);
		if (events & SMCM_TX)
			cpm_uart_int_tx(port);
	} else {
		events = sccp->scc_scce;
		sccp->scc_scce = events;
		if (events & UART_SCCM_BRKE)
			uart_handle_break(port);
		if (events & UART_SCCM_RX)
			cpm_uart_int_rx(port);
		if (events & UART_SCCM_TX)
			cpm_uart_int_tx(port);
	}
	return (events) ? IRQ_HANDLED : IRQ_NONE;
}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:34，代码来源:cpm_uart_core.c

示例7: cpm_uart_startup

static int cpm_uart_startup(struct uart_port *port)
{
	int retval;
	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
	int line = pinfo - cpm_uart_ports;

	pr_debug("CPM uart[%d]:startup\n", port->line);

	/* Install interrupt handler. */
	retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port);
	if (retval)
		return retval;

	/* Startup rx-int */
	if (IS_SMC(pinfo)) {
		pinfo->smcp->smc_smcm |= SMCM_RX;
		pinfo->smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
	} else {
		pinfo->sccp->scc_sccm |= UART_SCCM_RX;
		pinfo->sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
	}

	if (!(pinfo->flags & FLAG_CONSOLE))
		cpm_line_cr_cmd(line,CPM_CR_INIT_TRX);
	return 0;
}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:26，代码来源:cpm_uart_core.c

示例8: cpm_uart_request_port

/*
 * Initialize port. This is called from early_console stuff
 * so we have to be careful here !
 */
static int cpm_uart_request_port(struct uart_port *port)
{
    struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
    int ret;

    pr_debug("CPM uart[%d]:request port\n", port->line);

    if (pinfo->flags & FLAG_CONSOLE)
        return 0;

    /*
     * Setup any port IO, connect any baud rate generators,
     * etc.  This is expected to be handled by board
     * dependant code
     */
    if (pinfo->set_lineif)
        pinfo->set_lineif(pinfo);

    if (IS_SMC(pinfo)) {
        pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
        pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
    } else {
        pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
        pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
    }

    ret = cpm_uart_allocbuf(pinfo, 0);

    if (ret)
        return ret;

    cpm_uart_initbd(pinfo);

    return 0;
}

开发者ID:earthGavinLee，项目名称:hg556a_source，代码行数:39，代码来源:cpm_uart_core.c

示例9: cpm_uart_shutdown

/*
 * Shutdown the uart
 */
static void cpm_uart_shutdown(struct uart_port *port)
{
    struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
    int line = pinfo - cpm_uart_ports;

    pr_debug("CPM uart[%d]:shutdown\n", port->line);

    /* free interrupt handler */
    free_irq(port->irq, port);

    /* If the port is not the console, disable Rx and Tx. */
    if (!(pinfo->flags & FLAG_CONSOLE)) {
        /* Stop uarts */
        if (IS_SMC(pinfo)) {
            volatile smc_t *smcp = pinfo->smcp;
            smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
            smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
        } else {
            volatile scc_t *sccp = pinfo->sccp;
            sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
            sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
        }

        /* Shut them really down and reinit buffer descriptors */
        cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
        cpm_uart_initbd(pinfo);
    }
}

开发者ID:earthGavinLee，项目名称:hg556a_source，代码行数:31，代码来源:cpm_uart_core.c

示例10: cpm_uart_shutdown

/*
 * Shutdown the uart
 */
static void cpm_uart_shutdown(struct uart_port *port)
{
	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;

	pr_debug("CPM uart[%d]:shutdown\n", port->line);

	/* free interrupt handler */
	free_irq(port->irq, port);

	/* If the port is not the console, disable Rx and Tx. */
	if (!(pinfo->flags & FLAG_CONSOLE)) {
		/* Wait for all the BDs marked sent */
		while(!cpm_uart_tx_empty(port)) {
			set_current_state(TASK_UNINTERRUPTIBLE);
			schedule_timeout(2);
		}

		if (pinfo->wait_closing)
			cpm_uart_wait_until_send(pinfo);

		/* Stop uarts */
		if (IS_SMC(pinfo)) {
			smc_t __iomem *smcp = pinfo->smcp;
			clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
			clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX);
		} else {
			scc_t __iomem *sccp = pinfo->sccp;
			clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
			clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
		}

		/* Shut them really down and reinit buffer descriptors */
		if (IS_SMC(pinfo)) {
			out_be16(&pinfo->smcup->smc_brkcr, 0);
			cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
		} else {
			out_be16(&pinfo->sccup->scc_brkcr, 0);
			cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX);
		}

		cpm_uart_initbd(pinfo);
	}
}

开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:46，代码来源:cpm_uart_core.c

示例11: if

void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
				struct device_node *np)
{
	void __iomem *pram;
	unsigned long offset;
	struct resource res;
	unsigned long len;

	/* Don't remap parameter RAM if it has already been initialized
	 * during console setup.
	 */
	if (IS_SMC(port) && port->smcup)
		return port->smcup;
	else if (!IS_SMC(port) && port->sccup)
		return port->sccup;

	if (of_address_to_resource(np, 1, &res))
		return NULL;

	len = 1 + res.end - res.start;
	pram = ioremap(res.start, len);
	if (!pram)
		return NULL;

	if (!IS_SMC(port))
		return pram;

	if (len != 2) {
		printk(KERN_WARNING "cpm_uart[%d]: device tree references "
			"SMC pram, using boot loader/wrapper pram mapping. "
			"Please fix your device tree to reference the pram "
			"base register instead.\n",
			port->port.line);
		return pram;
	}

	offset = cpm_dpalloc(PROFF_SMC_SIZE, 64);
	out_be16(pram, offset);
	iounmap(pram);
	return cpm_muram_addr(offset);
}

开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:41，代码来源:cpm_uart_cpm2.c

示例12: cpm_uart_stop_rx

/*
 * Stop receiver
 */
static void cpm_uart_stop_rx(struct uart_port *port)
{
	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
	smc_t __iomem *smcp = pinfo->smcp;
	scc_t __iomem *sccp = pinfo->sccp;

	pr_debug("CPM uart[%d]:stop rx\n", port->line);

	if (IS_SMC(pinfo))
		clrbits8(&smcp->smc_smcm, SMCM_RX);
	else
		clrbits16(&sccp->scc_sccm, UART_SCCM_RX);
}

开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:16，代码来源:cpm_uart_core.c

示例13: cpm_uart_stop_rx

/*
 * Stop receiver
 */
static void cpm_uart_stop_rx(struct uart_port *port)
{
	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
	volatile smc_t *smcp = pinfo->smcp;
	volatile scc_t *sccp = pinfo->sccp;

	pr_debug("CPM uart[%d]:stop rx\n", port->line);

	if (IS_SMC(pinfo))
		smcp->smc_smcm &= ~SMCM_RX;
	else
		sccp->scc_sccm &= ~UART_SCCM_RX;
}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:16，代码来源:cpm_uart_core.c

示例14: cpm_uart_start_tx

/*
 * Start transmitter
 */
static void cpm_uart_start_tx(struct uart_port *port, unsigned int tty_start)
{
    struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
    volatile smc_t *smcp = pinfo->smcp;
    volatile scc_t *sccp = pinfo->sccp;

    pr_debug("CPM uart[%d]:start tx\n", port->line);

    if (IS_SMC(pinfo)) {
        if (smcp->smc_smcm & SMCM_TX)
            return;
    } else {
        if (sccp->scc_sccm & UART_SCCM_TX)
            return;
    }

    if (cpm_uart_tx_pump(port) != 0) {
        if (IS_SMC(pinfo))
            smcp->smc_smcm |= SMCM_TX;
        else
            sccp->scc_sccm |= UART_SCCM_TX;
    }
}

开发者ID:earthGavinLee，项目名称:hg556a_source，代码行数:26，代码来源:cpm_uart_core.c

示例15: cpm_uart_start_tx

/*
 * Start transmitter
 */
static void cpm_uart_start_tx(struct uart_port *port)
{
	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
	smc_t __iomem *smcp = pinfo->smcp;
	scc_t __iomem *sccp = pinfo->sccp;

	pr_debug("CPM uart[%d]:start tx\n", port->line);

	if (IS_SMC(pinfo)) {
		if (in_8(&smcp->smc_smcm) & SMCM_TX)
			return;
	} else {
		if (in_be16(&sccp->scc_sccm) & UART_SCCM_TX)
			return;
	}

	if (cpm_uart_tx_pump(port) != 0) {
		if (IS_SMC(pinfo)) {
			setbits8(&smcp->smc_smcm, SMCM_TX);
		} else {
			setbits16(&sccp->scc_sccm, UART_SCCM_TX);
		}
	}
}

开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:27，代码来源:cpm_uart_core.c

示例16: cpm_uart_startup

static int cpm_uart_startup(struct uart_port *port)
{
    int retval;
    struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;

    pr_debug("CPM uart[%d]:startup\n", port->line);

    /* Install interrupt handler. */
    retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port);
    if (retval)
        return retval;

    /* Startup rx-int */
    if (IS_SMC(pinfo)) {
        pinfo->smcp->smc_smcm |= SMCM_RX;
        pinfo->smcp->smc_smcmr |= SMCMR_REN;
    } else {
        pinfo->sccp->scc_sccm |= UART_SCCM_RX;
    }

    return 0;
}

开发者ID:earthGavinLee，项目名称:hg556a_source，代码行数:22，代码来源:cpm_uart_core.c

示例17: cpm_uart_unmap_pram

void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
{
	if (!IS_SMC(port))
		iounmap(pram);
}

开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:5，代码来源:cpm_uart_cpm2.c

示例18: utest

/* unconditional independence tests. */
SEXP utest(SEXP x, SEXP y, SEXP data, SEXP test, SEXP B, SEXP alpha,
    SEXP learning) {

int ntests = length(x), nobs = 0;
double *pvalue = NULL, statistic = 0, df = NA_REAL;
const char *t = CHAR(STRING_ELT(test, 0));
test_e test_type = test_label(t);
SEXP xx, yy, result;

  /* allocate the return value, which has the same length as x. */
  PROTECT(result = allocVector(REALSXP, ntests));
  setAttrib(result, R_NamesSymbol, x);
  pvalue = REAL(result);
  /* set all elements to zero. */
  memset(pvalue, '\0', ntests * sizeof(double));

  /* extract the variables from the data. */
  PROTECT(xx = c_dataframe_column(data, x, FALSE, FALSE));
  PROTECT(yy = c_dataframe_column(data, y, TRUE, FALSE));
  nobs = length(yy);

  if (IS_DISCRETE_ASYMPTOTIC_TEST(test_type)) {

    /* parametric tests for discrete variables. */
    statistic = ut_discrete(xx, yy, nobs, ntests, pvalue, &df, test_type);

  }/*THEN*/
  else if ((test_type == COR) || (test_type == ZF) || (test_type == MI_G) ||
           (test_type == MI_G_SH)) {

    /* parametric tests for Gaussian variables. */
    statistic = ut_gaustests(xx, yy, nobs, ntests, pvalue, &df, test_type);

  }/*THEN*/
  else if (test_type == MI_CG) {

    /* conditional linear Gaussian mutual information test. */
    statistic = ut_micg(xx, yy, nobs, ntests, pvalue, &df);

  }/*THEN*/
  else if (IS_DISCRETE_PERMUTATION_TEST(test_type)) {

    statistic = ut_dperm(xx, yy, nobs, ntests, pvalue, &df, test_type, INT(B),
                  IS_SMC(test_type) ? NUM(alpha) : 1);

  }/*THEN*/
  else if (IS_CONTINUOUS_PERMUTATION_TEST(test_type)) {

    statistic = ut_gperm(xx, yy, nobs, ntests, pvalue, test_type, INT(B),
                  IS_SMC(test_type) ? NUM(alpha) : 1);

  }/*THEN*/

  UNPROTECT(3);

  /* catch-all for unknown tests (after deallocating memory.) */
  if (test_type == ENOTEST)
    error("unknown test statistic '%s'.", t);

  /* increase the test counter. */
  test_counter += ntests;

  if (isTRUE(learning))
    return result;
  else
    return c_create_htest(statistic, test, pvalue[ntests - 1], df, B);

}/*UTEST*/

开发者ID:stochasticresearch，项目名称:bnlearn-r，代码行数:69，代码来源:utest.c

示例19: cpm_uart_set_termios


//.........这里部分代码省略.........
	/* Character length programmed into the mode register is the
	 * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
	 * 1 or 2 stop bits, minus 1.
	 * The value 'bits' counts this for us.
	 */
	cval = 0;
	scval = 0;

	/* byte size */
	switch (termios->c_cflag & CSIZE) {
	case CS5:
		bits = 5;
		break;
	case CS6:
		bits = 6;
		break;
	case CS7:
		bits = 7;
		break;
	case CS8:
		bits = 8;
		break;
		/* Never happens, but GCC is too dumb to figure it out */
	default:
		bits = 8;
		break;
	}
	sbits = bits - 5;

	if (termios->c_cflag & CSTOPB) {
		cval |= SMCMR_SL;	/* Two stops */
		scval |= SCU_PSMR_SL;
		bits++;
	}

	if (termios->c_cflag & PARENB) {
		cval |= SMCMR_PEN;
		scval |= SCU_PSMR_PEN;
		bits++;
		if (!(termios->c_cflag & PARODD)) {
			cval |= SMCMR_PM_EVEN;
			scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP);
		}
	}

	/*
	 * Set up parity check flag
	 */
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))

	port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
	if (termios->c_iflag & INPCK)
		port->read_status_mask |= BD_SC_FR | BD_SC_PR;
	if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK))
		port->read_status_mask |= BD_SC_BR;

	/*
	 * Characters to ignore
	 */
	port->ignore_status_mask = 0;
	if (termios->c_iflag & IGNPAR)
		port->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
	if (termios->c_iflag & IGNBRK) {
		port->ignore_status_mask |= BD_SC_BR;
		/*
		 * If we're ignore parity and break indicators, ignore
		 * overruns too.  (For real raw support).
		 */
		if (termios->c_iflag & IGNPAR)
			port->ignore_status_mask |= BD_SC_OV;
	}
	/*
	 * !!! ignore all characters if CREAD is not set
	 */
	if ((termios->c_cflag & CREAD) == 0)
		port->read_status_mask &= ~BD_SC_EMPTY;

	spin_lock_irqsave(&port->lock, flags);

	/* Start bit has not been added (so don't, because we would just
	 * subtract it later), and we need to add one for the number of
	 * stops bits (there is always at least one).
	 */
	bits++;
	if (IS_SMC(pinfo)) {
		/* Set the mode register.  We want to keep a copy of the
		 * enables, because we want to put them back if they were
		 * present.
		 */
		prev_mode = smcp->smc_smcmr;
		smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART;
		smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN));
	} else {
		sccp->scc_psmr = (sbits << 12) | scval;
	}

	cpm_set_brg(pinfo->brg - 1, baud);
	spin_unlock_irqrestore(&port->lock, flags);

}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:101，代码来源:cpm_uart_core.c

示例20: cpm_uart_set_termios


//.........这里部分代码省略.........
		break;
		/* Never happens, but GCC is too dumb to figure it out */
	default:
		bits = 8;
		break;
	}
	sbits = bits - 5;

	if (termios->c_cflag & CSTOPB) {
		cval |= SMCMR_SL;	/* Two stops */
		scval |= SCU_PSMR_SL;
		bits++;
	}

	if (termios->c_cflag & PARENB) {
		cval |= SMCMR_PEN;
		scval |= SCU_PSMR_PEN;
		bits++;
		if (!(termios->c_cflag & PARODD)) {
			cval |= SMCMR_PM_EVEN;
			scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP);
		}
	}

	/*
	 * Update the timeout
	 */
	uart_update_timeout(port, termios->c_cflag, baud);

	/*
	 * Set up parity check flag
	 */
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))

	port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
	if (termios->c_iflag & INPCK)
		port->read_status_mask |= BD_SC_FR | BD_SC_PR;
	if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK))
		port->read_status_mask |= BD_SC_BR;

	/*
	 * Characters to ignore
	 */
	port->ignore_status_mask = 0;
	if (termios->c_iflag & IGNPAR)
		port->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
	if (termios->c_iflag & IGNBRK) {
		port->ignore_status_mask |= BD_SC_BR;
		/*
		 * If we're ignore parity and break indicators, ignore
		 * overruns too.  (For real raw support).
		 */
		if (termios->c_iflag & IGNPAR)
			port->ignore_status_mask |= BD_SC_OV;
	}
	/*
	 * !!! ignore all characters if CREAD is not set
	 */
	if ((termios->c_cflag & CREAD) == 0)
		port->read_status_mask &= ~BD_SC_EMPTY;

	spin_lock_irqsave(&port->lock, flags);

	/* Start bit has not been added (so don't, because we would just
	 * subtract it later), and we need to add one for the number of
	 * stops bits (there is always at least one).
	 */
	bits++;
	if (IS_SMC(pinfo)) {
		/*
		 * MRBLR can be changed while an SMC/SCC is operating only
		 * if it is done in a single bus cycle with one 16-bit move
		 * (not two 8-bit bus cycles back-to-back). This occurs when
		 * the cp shifts control to the next RxBD, so the change does
		 * not take effect immediately. To guarantee the exact RxBD
		 * on which the change occurs, change MRBLR only while the
		 * SMC/SCC receiver is disabled.
		 */
		out_be16(&pinfo->smcup->smc_mrblr, pinfo->rx_fifosize);

		/* Set the mode register.  We want to keep a copy of the
		 * enables, because we want to put them back if they were
		 * present.
		 */
		prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN);
		/* Output in *one* operation, so we don't interrupt RX/TX if they
		 * were already enabled. */
		out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval |
		    SMCMR_SM_UART | prev_mode);
	} else {
		out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);
		out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
	}

	if (pinfo->clk)
		clk_set_rate(pinfo->clk, baud);
	else
		cpm_set_brg(pinfo->brg - 1, baud);
	spin_unlock_irqrestore(&port->lock, flags);
}

开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:101，代码来源:cpm_uart_core.c

注：本文中的IS_SMC函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ IS_SPACE函数代码示例发布时间：2022-05-30

C++ IS_SLASH函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18253|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9671|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8455|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7859|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ IS_SMC函数代码示例

示例1: cpm_uart_request_port

示例2: cpm_uart_start_tx

示例3: cpm_uart_startup

示例4: cpm_uart_console_setup

示例5: cpm_uart_int

示例6: cpm_uart_int

示例7: cpm_uart_startup

示例8: cpm_uart_request_port

示例9: cpm_uart_shutdown

示例10: cpm_uart_shutdown

示例11: if

示例12: cpm_uart_stop_rx

示例13: cpm_uart_stop_rx

示例14: cpm_uart_start_tx

示例15: cpm_uart_start_tx

示例16: cpm_uart_startup

示例17: cpm_uart_unmap_pram

示例18: utest

示例19: cpm_uart_set_termios

示例20: cpm_uart_set_termios

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

goldfire/howler.js: Javascript audio lib

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053