C++ IS_TRUE函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中IS_TRUE函数的典型用法代码示例。如果您正苦于以下问题：C++ IS_TRUE函数的具体用法？C++ IS_TRUE怎么用？C++ IS_TRUE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了IS_TRUE函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: test_receive_stream

int test_receive_stream() {
    IT("receives a streamed callback message");
    reset_callback();
    
    Stream stream;
    stream.expect((uint8_t*)"payload",7);
    
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);
    
    PubSubClient client(server, 1883, callback, shimClient, stream);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    
    byte publish[] = {0x30,0xe,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x70,0x61,0x79,0x6c,0x6f,0x61,0x64};
    shimClient.respond(publish,16);
    
    rc = client.loop();

    IS_TRUE(rc);
    
    IS_TRUE(callback_called);
    IS_TRUE(strcmp(lastTopic,"topic")==0);
    IS_TRUE(lastLength == 7);
    
    IS_FALSE(stream.error());
    IS_FALSE(shimClient.error());

    END_IT
}

开发者ID:4refr0nt，项目名称:ESPEasy-full-source，代码行数:33，代码来源:receive_spec.cpp

示例2: sensors_config

static int sensors_config(const char *key, const char *value) {
  if (sensor_list == NULL)
    sensor_list = ignorelist_create(1);

  /* TODO: This setting exists for compatibility with old versions of
   * lm-sensors. Remove support for those ancient versions in the next
   * major release. */
  if (strcasecmp(key, "SensorConfigFile") == 0) {
    char *tmp = strdup(value);
    if (tmp != NULL) {
      sfree(conffile);
      conffile = tmp;
    }
  } else if (strcasecmp(key, "Sensor") == 0) {
    if (ignorelist_add(sensor_list, value)) {
      ERROR("sensors plugin: "
            "Cannot add value to ignorelist.");
      return 1;
    }
  } else if (strcasecmp(key, "IgnoreSelected") == 0) {
    ignorelist_set_invert(sensor_list, 1);
    if (IS_TRUE(value))
      ignorelist_set_invert(sensor_list, 0);
  }
#if (SENSORS_API_VERSION >= 0x400) && (SENSORS_API_VERSION < 0x500)
  else if (strcasecmp(key, "UseLabels") == 0) {
    use_labels = IS_TRUE(value);
  }
#endif
  else {
    return -1;
  }

  return 0;
}

开发者ID:rpv-tomsk，项目名称:collectd，代码行数:35，代码来源:sensors.c

示例3: while

/* Hoist det of loop.
e.g: while (a=10,b+=3,c<a) {
		IR-LIST;
	 }

be replaced by

	 a = 10;
	 b += 3;
	 while (c<a) {
		IR-LIST;
		a = 10;
	    b += 3;
	 } */
bool IR_CFS_OPT::hoist_loop(IR ** head, IR * ir)
{
	IS_TRUE(IR_type(ir)==IR_DO_WHILE ||
		    IR_type(ir)==IR_WHILE_DO ||
			IR_type(ir)==IR_DO_LOOP, ("need LOOP"));
	IS_TRUE(LOOP_det(ir), ("DET is NULL"));
	IR * det = LOOP_det(ir);

	INT i = 0;
	while (det != NULL) {
		i++;
		det = IR_next(det);
	}

	IR * new_list = NULL, * new_body_list = NULL;
	if (i > 1) {
		det = LOOP_det(ir);
		while (i > 1) {
			IR * c = det;
			IS_TRUE(c->is_stmt(), ("Non-stmt ir should be remove "
								   "during reshape_ir_tree()"));
			det = IR_next(det);
			remove(&LOOP_det(ir), c);
			add_next(&new_list, c);
			i--;
		}
		new_body_list = m_ru->dup_irs_list(new_list);
		insertbefore(head, ir, new_list);
		add_next(&LOOP_body(ir), new_body_list);
		return true;
	}
	return false;
}

开发者ID:Grainspring，项目名称:xoc，代码行数:47，代码来源:cfs_opt.cpp

示例4: test_receive_oversized_message

int test_receive_oversized_message() {
    IT("drops an oversized message");
    reset_callback();
    
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);
    
    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    
    byte length = MQTT_MAX_PACKET_SIZE+1;
    byte publish[] = {0x30,length-2,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x70,0x61,0x79,0x6c,0x6f,0x61,0x64};
    byte bigPublish[length];
    memset(bigPublish,'A',length);
    bigPublish[length] = 'B';
    memcpy(bigPublish,publish,16);
    shimClient.respond(bigPublish,length);
    
    rc = client.loop();
    
    IS_TRUE(rc);
    
    IS_FALSE(callback_called);
    
    IS_FALSE(shimClient.error());

    END_IT
}

开发者ID:4refr0nt，项目名称:ESPEasy-full-source，代码行数:32，代码来源:receive_spec.cpp

示例5:

//----------------------------------------------------------//
// CFileDirectTextReader::Open
//----------------------------------------------------------//
CFile::Error::Enum CFileDirectTextReader::Open(void)
{
	if (IS_TRUE(Validate()))
	{
		if (IS_FALSE(IsOpen()))
		{
			m_pFile = SysFileIO::Fopen(m_strFileName.ConstBuffer(), "rt");
			m_nSize = 0;

			if (IS_TRUE(IsOpen()))
			{
				SysFileIO::Fseek(m_pFile, 0, SEEK_END);
				m_nSize = SysFileIO::Ftell(m_pFile);
				SysFileIO::Fseek(m_pFile, 0, SEEK_SET);

				return Error::Ok;
			}

			return Error::FileOpenFailed;
		}

		return Error::FileAlreadyOpen;
	}

	return Error::Failed;
}

开发者ID:lemmingrad，项目名称:NEVista，代码行数:29，代码来源:FileDirectTextReader.cpp

示例6: if

/* Canonicalize det of IF.
e.g: if (a=10,b+=3,c<a) {...}
be replaced by
	 a = 10;
	 b += 3;
	 if (c<a) {...} */
bool IR_CFS_OPT::hoist_if(IR ** head, IR * ir)
{
	IS_TRUE(IR_type(ir) == IR_IF, ("need IF"));
	IS_TRUE(IF_det(ir), ("DET is NULL"));

	IR * det = IF_det(ir);
	INT i = 0;
	while (det != NULL) {
		i++;
		det = IR_next(det);
	}

	IR * new_list = NULL;
	if (i > 1) {
		det = IF_det(ir);
		while (i > 1) {
			IR * c = det;
			IS_TRUE(c->is_stmt(),
				("Non-stmt ir should be remove during reshape_ir_tree()"));
			det = IR_next(det);
			remove(&IF_det(ir), c);
			add_next(&new_list, c);
			i--;
		}
		insertbefore(head, ir, new_list);
		return true;
	}
	return false;
}

开发者ID:Grainspring，项目名称:xoc，代码行数:35，代码来源:cfs_opt.cpp

示例7: interface_config

static int interface_config(const char *key, const char *value) {
  if (ignorelist == NULL)
    ignorelist = ignorelist_create(/* invert = */ 1);

  if (strcasecmp(key, "Interface") == 0) {
    ignorelist_add(ignorelist, value);
  } else if (strcasecmp(key, "IgnoreSelected") == 0) {
    int invert = 1;
    if (IS_TRUE(value))
      invert = 0;
    ignorelist_set_invert(ignorelist, invert);
  } else if (strcasecmp(key, "ReportInactive") == 0)
    report_inactive = IS_TRUE(value);
  else if (strcasecmp(key, "UniqueName") == 0) {
#ifdef HAVE_LIBKSTAT
    if (IS_TRUE(value))
      unique_name = true;
#else
    WARNING("interface plugin: the \"UniqueName\" option is only valid on "
            "Solaris.");
#endif /* HAVE_LIBKSTAT */
  } else {
    return -1;
  }

  return 0;
}

开发者ID:collectd，项目名称:collectd，代码行数:27，代码来源:interface.c

示例8: df_config

static int df_config (const char *key, const char *value)
{
	df_init ();

	if (strcasecmp (key, "Device") == 0)
	{
		if (ignorelist_add (il_device, value))
			return (1);
		return (0);
	}
	else if (strcasecmp (key, "MountPoint") == 0)
	{
		if (ignorelist_add (il_mountpoint, value))
			return (1);
		return (0);
	}
	else if (strcasecmp (key, "FSType") == 0)
	{
		if (ignorelist_add (il_fstype, value))
			return (1);
		return (0);
	}
	else if (strcasecmp (key, "IgnoreSelected") == 0)
	{
		if (IS_TRUE (value))
		{
			ignorelist_set_invert (il_device, 0);
			ignorelist_set_invert (il_mountpoint, 0);
			ignorelist_set_invert (il_fstype, 0);
		}
		else
		{
			ignorelist_set_invert (il_device, 1);
			ignorelist_set_invert (il_mountpoint, 1);
			ignorelist_set_invert (il_fstype, 1);
		}
		return (0);
	}
	else if (strcasecmp (key, "ReportByDevice") == 0)
	{
		if (IS_TRUE (value))
			by_device = 1;

		return (0);
	}
	else if (strcasecmp (key, "ReportInodes") == 0)
	{
		if (IS_TRUE (value))
			report_inodes = 1;
		else
			report_inodes = 0;

		return (0);
	}


	return (-1);
}

开发者ID:bangel79，项目名称:collectd，代码行数:58，代码来源:df.c

示例9: IS_TRUE

//----------------------------------------------------------//
// CFileDirectTextReader::GetString
//----------------------------------------------------------//
//-- Description
// Read a string from an open direct access file.
// A string is determined as terminated by a newline
// character or the end of file. Any trailing newline will be
// stripped from the output string.
//----------------------------------------------------------//
s8* CFileDirectTextReader::GetString(s8* pDstBuffer, size_t nDstBufferSize)
{
	if ( IS_TRUE(Validate())
		&& IS_TRUE(IsOpen())
		&& IS_PTR(pDstBuffer)
		&& (nDstBufferSize > 0) )
	{
		return SysFileIO::Fgets(m_pFile, pDstBuffer, nDstBufferSize);
	}

	return NULL;
}

开发者ID:lemmingrad，项目名称:NEVista，代码行数:21，代码来源:FileDirectTextReader.cpp

示例10: IS_TRUE

//Reverse edge direction
EDGE * GRAPH::rev_edge(EDGE * e)
{
	IS_TRUE(m_pool != NULL, ("not yet initialized."));
	IS_TRUE(m_is_direction, ("graph is indirection"));
	void * einfo = EDGE_info(e);
	VERTEX * from = EDGE_from(e);
	VERTEX * to = EDGE_to(e);
	remove_edge(e);
	e = add_edge(VERTEX_id(to), VERTEX_id(from));
	EDGE_info(e) = einfo;
	return e;
}

开发者ID:bruce2008github，项目名称:xocfe，代码行数:13，代码来源:sgraph.cpp

示例11: cpu_config

static int cpu_config (char const *key, char const *value) /* {{{ */
{
	if (strcasecmp (key, "ReportByCpu") == 0)
		report_by_cpu = IS_TRUE (value) ? 1 : 0;
	else if (strcasecmp (key, "ValuesPercentage") == 0)
		report_percent = IS_TRUE (value) ? 1 : 0;
	else if (strcasecmp (key, "ReportByState") == 0)
		report_by_state = IS_TRUE (value) ? 1 : 0;
	else
		return (-1);

	return (0);
} /* }}} int cpu_config */

开发者ID:Chronial，项目名称:collectd，代码行数:13，代码来源:cpu.c

示例12: disk_config

static int disk_config (const char *key, const char *value)
{
  if (ignorelist == NULL)
    ignorelist = ignorelist_create (/* invert = */ 1);
  if (ignorelist == NULL)
    return (1);

  if (strcasecmp ("Disk", key) == 0)
  {
    ignorelist_add (ignorelist, value);
  }
  else if (strcasecmp ("IgnoreSelected", key) == 0)
  {
    int invert = 1;
    if (IS_TRUE (value))
      invert = 0;
    ignorelist_set_invert (ignorelist, invert);
  }
  else if (strcasecmp ("UseBSDName", key) == 0)
  {
#if HAVE_IOKIT_IOKITLIB_H
    use_bsd_name = IS_TRUE (value) ? 1 : 0;
#else
    WARNING ("disk plugin: The \"UseBSDName\" option is only supported "
        "on Mach / Mac OS X and will be ignored.");
#endif
  }
  else if (strcasecmp ("UdevNameAttr", key) == 0)
  {
#if HAVE_LIBUDEV
    if (conf_udev_name_attr != NULL)
    {
      free (conf_udev_name_attr);
      conf_udev_name_attr = NULL;
    }
    if ((conf_udev_name_attr = strdup (value)) == NULL)
      return (1);
#else
    WARNING ("disk plugin: The \"UdevNameAttr\" option is only supported "
        "if collectd is built with libudev support");
#endif
  }
  else
  {
    return (-1);
  }

  return (0);
} /* int disk_config */

开发者ID:zach14c，项目名称:collectd，代码行数:49，代码来源:disk.c

示例13: huge_config_callback

static int huge_config_callback(const char *key, const char *val)
{
  DEBUG("%s: HugePages config key='%s', val='%s'", g_plugin_name, key, val);

  if (strcasecmp(key, g_cfg_rpt_numa) == 0) {
    g_flag_rpt_numa = IS_TRUE(val);
    return 0;
  }
  if (strcasecmp(key, g_cfg_rpt_mm) == 0) {
    g_flag_rpt_mm = IS_TRUE(val);
    return 0;
  }

  return -1;
}

开发者ID:bzed，项目名称:collectd，代码行数:15，代码来源:hugepages.c

示例14: test_keepalive_disconnects_hung

int test_keepalive_disconnects_hung() {
    IT("disconnects a hung connection");
    
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);
    
    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    
    byte pingreq[] = { 0xC0,0x0 };
    shimClient.expect(pingreq,2);
    
    for (int i = 0; i < 32; i++) {
        sleep(1);
        rc = client.loop();
    }
    IS_FALSE(rc);
    
    IS_FALSE(shimClient.error());

    END_IT
}

开发者ID:4refr0nt，项目名称:ESPEasy-full-source，代码行数:26，代码来源:keepalive_spec.cpp

示例15: switch

void IR_GVN::dump_bb_labs(LIST<LABEL_INFO*> & lst)
{
	for (LABEL_INFO * li = lst.get_head(); li != NULL; li = lst.get_next()) {
		switch (LABEL_INFO_type(li)) {
		case L_CLABEL:
			note(CLABEL_STR_FORMAT, CLABEL_CONT(li));
			break;
		case L_ILABEL:
			note(ILABEL_STR_FORMAT, ILABEL_CONT(li));
			break;
		case L_PRAGMA:
			note("%s", LABEL_INFO_pragma(li));
			break;
		default: IS_TRUE(0,("unsupport"));
		}
		if (LABEL_INFO_is_try_start(li) ||
			LABEL_INFO_is_try_end(li) ||
			LABEL_INFO_is_catch_start(li)) {
			fprintf(g_tfile, "(");
			if (LABEL_INFO_is_try_start(li)) {
				fprintf(g_tfile, "try_start,");
			}
			if (LABEL_INFO_is_try_end(li)) {
				fprintf(g_tfile, "try_end,");
			}
			if (LABEL_INFO_is_catch_start(li)) {
				fprintf(g_tfile, "catch_start");
			}
			fprintf(g_tfile, ")");
		}
		fprintf(g_tfile, " ");
	}
}

开发者ID:Grainspring，项目名称:xoc，代码行数:33，代码来源:ir_gvn.cpp

示例16: mysql_config_set_boolean

static int mysql_config_set_boolean (int *ret_boolean, /* {{{ */
				oconfig_item_t *ci)
{
	int status = 0;

	if (ci->values_num != 1)
		status = -1;

	if (status == 0)
	{
		if (ci->values[0].type == OCONFIG_TYPE_BOOLEAN)
			*ret_boolean = ci->values[0].value.boolean;
		else if (ci->values[0].type == OCONFIG_TYPE_STRING)
		{
			if (IS_TRUE (ci->values[0].value.string))
				*ret_boolean = 1;
			else if (IS_FALSE (ci->values[0].value.string))
				*ret_boolean = 0;
			else
				status = -1;
		}
		else
			status = -1;
	}

	if (status != 0)
	{
		WARNING ("mysql plugin: The `%s' config option "
			"needs exactly one boolean argument.", ci->key);
		return (-1);
	}
	return (0);
} /* }}} mysql_config_set_boolean */

开发者ID:nkazzaz，项目名称:collectd-freeswitch，代码行数:33，代码来源:mysql.c

示例17: unlink

void GRAPH::dump_dot(CHAR const* name)
{
	if (name == NULL) {
		name = "graph.dot";
	}
	unlink(name);
	FILE * h = fopen(name, "a+");
	IS_TRUE(h, ("%s create failed!!!", name));

	fprintf(h, "digraph G {\n");
	//Print node
	INT c;
	for (VERTEX const* v = m_vertexs.get_first(c); 
		 v != NULL; v = m_vertexs.get_next(c)) {
		fprintf(h, "\nnode%d [shape = Mrecord, label=\"{BB%d}\"];", 
				VERTEX_id(v), VERTEX_id(v));
	}

	//Print edge
	for (EDGE const* e = m_edges.get_first(c); 
		 e != NULL; e = m_edges.get_next(c)) {
		fprintf(h, "\nnode%d->node%d[label=\"%s\"]",
					VERTEX_id(EDGE_from(e)), 
					VERTEX_id(EDGE_to(e)),
					""); 
	}
	fprintf(h, "\n}\n");
	fclose(h);
}

开发者ID:bruce2008github，项目名称:xocfe，代码行数:29，代码来源:sgraph.cpp

示例18: apcups_config

static int apcups_config (const char *key, const char *value)
{
	if (strcasecmp (key, "host") == 0)
	{
		if (conf_host != NULL)
		{
			free (conf_host);
			conf_host = NULL;
		}
		if ((conf_host = strdup (value)) == NULL)
			return (1);
	}
	else if (strcasecmp (key, "Port") == 0)
	{
		int port_tmp = atoi (value);
		if (port_tmp < 1 || port_tmp > 65535)
		{
			WARNING ("apcups plugin: Invalid port: %i", port_tmp);
			return (1);
		}
		conf_port = port_tmp;
	}
	else if (strcasecmp (key, "ReportSeconds") == 0)
	{
		if (IS_TRUE (value))
			conf_report_seconds = 1;
		else
			conf_report_seconds = 0;
	}
	else
	{
		return (-1);
	}
	return (0);
}

开发者ID:BrianB2，项目名称:collectd，代码行数:35，代码来源:apcups.c

示例19: smart_config

static int smart_config (const char *key, const char *value)
{
  if (ignorelist == NULL)
    ignorelist = ignorelist_create (/* invert = */ 1);
  if (ignorelist == NULL)
    return (1);

  if (strcasecmp ("Disk", key) == 0)
  {
    ignorelist_add (ignorelist, value);
  }
  else if (strcasecmp ("IgnoreSelected", key) == 0)
  {
    int invert = 1;
    if (IS_TRUE (value))
      invert = 0;
    ignorelist_set_invert (ignorelist, invert);
  }
  else
  {
    return (-1);
  }

  return (0);
} /* int smart_config */

开发者ID:skarlsson，项目名称:collectd，代码行数:25，代码来源:smart.c

示例20: cpu_config

static int cpu_config (const char *key, const char *value)
{
	if (strcasecmp (key, "ReportByCpu") == 0) {
		report_by_cpu = IS_TRUE (value) ? 1 : 0;
		if (!report_by_cpu)
			report_percent = 1;
	}
	if (strcasecmp (key, "ValuesPercentage") == 0) {
		report_percent = IS_TRUE (value) ? 1 : 0;
		if (!report_percent)
			report_by_cpu = 1;
	}
	if (strcasecmp (key, "ReportActive") == 0)
		report_active = IS_TRUE (value) ? 1 : 0;
	return (-1);
}

开发者ID:JaseFace，项目名称:collectd，代码行数:16，代码来源:cpu.c

注：本文中的IS_TRUE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ IS_TSC_ALL_INSTANCE函数代码示例发布时间：2022-05-30

C++ IS_SYNC函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18253|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9671|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8455|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7859|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ IS_TRUE函数代码示例

示例1: test_receive_stream

示例2: sensors_config

示例3: while

示例4: test_receive_oversized_message

示例5:

示例6: if

示例7: interface_config

示例8: df_config

示例9: IS_TRUE

示例10: IS_TRUE

示例11: cpu_config

示例12: disk_config

示例13: huge_config_callback

示例14: test_keepalive_disconnects_hung

示例15: switch

示例16: mysql_config_set_boolean

示例17: unlink

示例18: apcups_config

示例19: smart_config

示例20: cpu_config

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

goldfire/howler.js: Javascript audio lib

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053