C++ IS_VALID_CARD函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中IS_VALID_CARD函数的典型用法代码示例。如果您正苦于以下问题：C++ IS_VALID_CARD函数的具体用法？C++ IS_VALID_CARD怎么用？C++ IS_VALID_CARD使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了IS_VALID_CARD函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: setup_buffers

int setup_buffers(int card, int c)
{
	unsigned int nBuffers, i, cBase;
	unsigned int buffer_size;
	LLData	RcvBuffOffset;

	if(!IS_VALID_CARD(card)) {
		pr_debug("invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	/*
	 * Calculate the buffer offsets (send/recv/send/recv)
	 */
	pr_debug("%s: setting up channel buffer space in shared RAM\n",
			sc_adapter[card]->devicename);
	buffer_size = BUFFER_SIZE;
	nBuffers = ((sc_adapter[card]->ramsize - BUFFER_BASE) / buffer_size) / 2;
	nBuffers = nBuffers > BUFFERS_MAX ? BUFFERS_MAX : nBuffers;
	pr_debug("%s: calculating buffer space: %d buffers, %d big\n",
		sc_adapter[card]->devicename,
		nBuffers, buffer_size);
	if(nBuffers < 2) {
		pr_debug("%s: not enough buffer space\n",
			sc_adapter[card]->devicename);
		return -1;
	}
	cBase = (nBuffers * buffer_size) * (c - 1);
	pr_debug("%s: channel buffer offset from shared RAM: 0x%x\n",
			sc_adapter[card]->devicename, cBase);
	sc_adapter[card]->channel[c-1].first_sendbuf = BUFFER_BASE + cBase;
	sc_adapter[card]->channel[c-1].num_sendbufs = nBuffers / 2;
	sc_adapter[card]->channel[c-1].free_sendbufs = nBuffers / 2;
	sc_adapter[card]->channel[c-1].next_sendbuf = 0;
	pr_debug("%s: send buffer setup complete: first=0x%x n=%d f=%d, nxt=%d\n",
				sc_adapter[card]->devicename,
				sc_adapter[card]->channel[c-1].first_sendbuf,
				sc_adapter[card]->channel[c-1].num_sendbufs,
				sc_adapter[card]->channel[c-1].free_sendbufs,
				sc_adapter[card]->channel[c-1].next_sendbuf);

	/*
	 * Prep the receive buffers
	 */
	pr_debug("%s: adding %d RecvBuffers:\n",
			sc_adapter[card]->devicename, nBuffers /2);
	for (i = 0 ; i < nBuffers / 2; i++) {
		RcvBuffOffset.buff_offset = 
			((sc_adapter[card]->channel[c-1].first_sendbuf +
			(nBuffers / 2) * buffer_size) + (buffer_size * i));
		RcvBuffOffset.msg_len = buffer_size;
		pr_debug("%s: adding RcvBuffer #%d offset=0x%x sz=%d bufsz:%d\n",
				sc_adapter[card]->devicename,
				i + 1, RcvBuffOffset.buff_offset, 
				RcvBuffOffset.msg_len,buffer_size);
		sendmessage(card, CEPID, ceReqTypeLnk, ceReqClass1, ceReqLnkRead,
				c, sizeof(LLData), (unsigned int *)&RcvBuffOffset);
	} 
	return 0;
}

开发者ID:chm088，项目名称:linux-2.6.18，代码行数:60，代码来源:packet.c

示例2: memcpy_toshmem

void memcpy_toshmem(int card, void *dest, const void *src, size_t n)
{
	unsigned long flags;
	unsigned char ch;
	unsigned long dest_rem = ((unsigned long) dest) % 0x4000;

	if (!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return;
	}

	if (n > SRAM_PAGESIZE)
		return;

	/*
	 * determine the page to load from the address
	 */
	ch = (unsigned long) dest / SRAM_PAGESIZE;
	pr_debug("%s: loaded page %d\n", sc_adapter[card]->devicename,ch);
	/*
	 * Block interrupts and load the page
	 */
	spin_lock_irqsave(&sc_adapter[card]->lock, flags);

	outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
		sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
	memcpy_toio((void __iomem *)(sc_adapter[card]->rambase + dest_rem), src, n);
	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
	pr_debug("%s: set page to %#x\n",sc_adapter[card]->devicename,
		((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE)>>14)|0x80);
	pr_debug("%s: copying %zu bytes from %#lx to %#lx\n",
		sc_adapter[card]->devicename, n,
		(unsigned long) src,
		sc_adapter[card]->rambase + ((unsigned long) dest %0x4000));
}

开发者ID:1703011，项目名称:asuswrt-merlin，代码行数:35，代码来源:shmem.c

示例3: memset_shmem

void memset_shmem(int card, void *dest, int c, size_t n)
{
	unsigned long flags;
	unsigned char ch;

	if(!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return;
	}

	if(n > SRAM_PAGESIZE) {
		return;
	}

	/*
	 * determine the page to load from the address
	 */
	ch = (unsigned long) dest / SRAM_PAGESIZE;
	pr_debug("%s: loaded page %d\n",sc_adapter[card]->devicename,ch);

	/*
	 * Block interrupts and load the page
	 */
	spin_lock_irqsave(&sc_adapter[card]->lock, flags);

	outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
		sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
	memset_io(sc_adapter[card]->rambase +
		((unsigned long) dest % 0x4000), c, n);
	pr_debug("%s: set page to %#x\n",sc_adapter[card]->devicename,
		((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE)>>14)|0x80);
	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
}

开发者ID:tch-opensrc，项目名称:TC72XX_LxG1.0.10mp5_OpenSrc，代码行数:33，代码来源:shmem.c

示例4: reset

int reset(int card)
{
	unsigned long flags;

	if (!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	indicate_status(card, ISDN_STAT_STOP, 0, NULL);

	if (sc_adapter[card]->EngineUp) {
		del_timer(&sc_adapter[card]->stat_timer);
	}

	sc_adapter[card]->EngineUp = 0;

	spin_lock_irqsave(&sc_adapter[card]->lock, flags);
	init_timer(&sc_adapter[card]->reset_timer);
	sc_adapter[card]->reset_timer.function = sc_check_reset;
	sc_adapter[card]->reset_timer.data = card;
	sc_adapter[card]->reset_timer.expires = jiffies + CHECKRESET_TIME;
	add_timer(&sc_adapter[card]->reset_timer);
	spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);

	outb(0x1, sc_adapter[card]->ioport[SFT_RESET]);

	pr_debug("%s: Adapter Reset\n", sc_adapter[card]->devicename);
	return 0;
}

开发者ID:openube，项目名称:android_kernel_sony_c2305，代码行数:30，代码来源:command.c

示例5: setl2

/*
 * Set the layer 2 protocol (X.25, HDLC, Raw)
 */
static int setl2(int card, unsigned long arg)
{
	int status = 0;
	int protocol, channel;

	if (!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}
	protocol = arg >> 8;
	channel = arg & 0xff;
	sc_adapter[card]->channel[channel].l2_proto = protocol;

	/*
	 * check that the adapter is also set to the correct protocol
	 */
	pr_debug("%s: Sending GetFrameFormat for channel %d\n",
		 sc_adapter[card]->devicename, channel + 1);
	status = sendmessage(card, CEPID, ceReqTypeCall,
			     ceReqClass0,
			     ceReqCallGetFrameFormat,
			     (unsigned char)channel + 1,
			     1,
			     (unsigned int *)protocol);
	if (status)
		return status;
	return 0;
}

开发者ID:openube，项目名称:android_kernel_sony_c2305，代码行数:31，代码来源:command.c

示例6: dial

/*
 * Dials the number passed in
 */
static int dial(int card, unsigned long channel, setup_parm setup)
{
	int status;
	char Phone[48];

	if (!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	/*extract ISDN number to dial from eaz/msn string*/
	strcpy(Phone, setup.phone);

	/*send the connection message*/
	status = sendmessage(card, CEPID, ceReqTypePhy,
			     ceReqClass1,
			     ceReqPhyConnect,
			     (unsigned char)channel + 1,
			     strlen(Phone),
			     (unsigned int *)Phone);

	pr_debug("%s: Dialing %s on channel %lu\n",
		 sc_adapter[card]->devicename, Phone, channel + 1);

	return status;
}

开发者ID:openube，项目名称:android_kernel_sony_c2305，代码行数:29，代码来源:command.c

示例7: getl3

/*
 * Get the layer 3 protocol
 */
int getl3(int card, unsigned long arg) 
{
	if(!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	pr_debug("%s: Level 3 protocol for channel %d reported as %s\n",
			adapter[card]->devicename, arg+1,
			l3protos[adapter[card]->channel[arg].l3_proto]);
	return adapter[card]->channel[arg].l3_proto;
}

开发者ID:chinnyannieb，项目名称:empeg-hijack，代码行数:15，代码来源:command.c

示例8: setl3

/*
 * Set the layer 3 protocol
 */
static int setl3(int card, unsigned long channel)
{
	int protocol = channel >> 8;

	if(!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	sc_adapter[card]->channel[channel].l3_proto = protocol;
	return 0;
}

开发者ID:Vincentxiaojie，项目名称:xpenology，代码行数:15，代码来源:command.c

示例9: command

int command(isdn_ctrl *cmd)
{
	int card;

	card = get_card_from_id(cmd->driver);
	if(!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	pr_debug("%s: Received %s command from Link Layer\n",
		sc_adapter[card]->devicename, commands[cmd->command]);

	/*
	 * Dispatch the command
	 */
	switch(cmd->command) {
	case ISDN_CMD_IOCTL:
	{
		unsigned long 	cmdptr;
		scs_ioctl	ioc;

		memcpy(&cmdptr, cmd->parm.num, sizeof(unsigned long));
		if (copy_from_user(&ioc, (scs_ioctl __user *)cmdptr,
				   sizeof(scs_ioctl))) {
			pr_debug("%s: Failed to verify user space 0x%x\n",
				sc_adapter[card]->devicename, cmdptr);
			return -EFAULT;
		}
		return sc_ioctl(card, &ioc);
	}
	case ISDN_CMD_DIAL:
		return dial(card, cmd->arg, cmd->parm.setup);
	case ISDN_CMD_HANGUP:
		return hangup(card, cmd->arg);
	case ISDN_CMD_ACCEPTD:
		return answer(card, cmd->arg);
	case ISDN_CMD_ACCEPTB:
		return acceptb(card, cmd->arg);
	case ISDN_CMD_CLREAZ:
		return clreaz(card, cmd->arg);
	case ISDN_CMD_SETEAZ:
		return seteaz(card, cmd->arg, cmd->parm.num);
	case ISDN_CMD_SETL2:
		return setl2(card, cmd->arg);
	case ISDN_CMD_SETL3:
		return setl3(card, cmd->arg);
	default:
		return -EINVAL;
	}
	return 0;
}

开发者ID:jameshilliard，项目名称:actiontec_opensrc_mi424wr-rev-ef_fw-20-19-8，代码行数:52，代码来源:command.c

示例10: clreaz

static int clreaz(int card, unsigned long arg)
{
	if(!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	strcpy(sc_adapter[card]->channel[arg].eazlist, "");
	sc_adapter[card]->channel[arg].eazclear = 1;
	pr_debug("%s: EAZ List cleared for channel %lu\n",
		sc_adapter[card]->devicename, arg+1);
	return 0;
}

开发者ID:Vincentxiaojie，项目名称:xpenology，代码行数:13，代码来源:command.c

示例11: getsil

int getsil(int card, unsigned long arg, char *num)
{
	if(!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	strcpy(num, adapter[card]->channel[arg].sillist);
	pr_debug("%s: SIL for channel %d reported: %s\n",
		adapter[card]->devicename, arg+1,
		adapter[card]->channel[arg].sillist);
	return 0;
}

开发者ID:chinnyannieb，项目名称:empeg-hijack，代码行数:13，代码来源:command.c

示例12: setsil

int setsil(int card, unsigned long arg, char *num)
{
	if(!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	strcpy(adapter[card]->channel[arg].sillist, num);
	pr_debug("%s: Service Indicators for channel %d set: %s\n",
		adapter[card]->devicename, arg+1,
		adapter[card]->channel[arg].sillist);
	return 0;
}

开发者ID:chinnyannieb，项目名称:empeg-hijack，代码行数:13，代码来源:command.c

示例13: rcvpkt

void rcvpkt(int card, RspMessage *rcvmsg)
{
	LLData newll;
	struct sk_buff *skb;

	if(!IS_VALID_CARD(card)) {
		pr_debug("invalid param: %d is not a valid card id\n", card);
		return;
	}

	switch(rcvmsg->rsp_status){
	case 0x01:
	case 0x02:
	case 0x70:
		pr_debug("%s: error status code: 0x%x\n",
			sc_adapter[card]->devicename, rcvmsg->rsp_status);
		return;
	case 0x00: 
	    if (!(skb = dev_alloc_skb(rcvmsg->msg_data.response.msg_len))) {
			printk(KERN_WARNING "%s: rcvpkt out of memory, dropping packet\n",
				sc_adapter[card]->devicename);
			return;
		}
		skb_put(skb, rcvmsg->msg_data.response.msg_len);
		pr_debug("%s: getting data from offset: 0x%x\n",
			sc_adapter[card]->devicename,
			rcvmsg->msg_data.response.buff_offset);
		memcpy_fromshmem(card,
			skb_put(skb, rcvmsg->msg_data.response.msg_len),
		 	(char *)rcvmsg->msg_data.response.buff_offset,
			rcvmsg->msg_data.response.msg_len);
		sc_adapter[card]->card->rcvcallb_skb(sc_adapter[card]->driverId,
			rcvmsg->phy_link_no-1, skb);

	case 0x03:
		/*
	 	 * Recycle the buffer
	 	 */
		pr_debug("%s: buffer size : %d\n",
				sc_adapter[card]->devicename, BUFFER_SIZE);
/*		memset_shmem(card, rcvmsg->msg_data.response.buff_offset, 0, BUFFER_SIZE); */
		newll.buff_offset = rcvmsg->msg_data.response.buff_offset;
		newll.msg_len = BUFFER_SIZE;
		pr_debug("%s: recycled buffer at offset 0x%x size %d\n",
			sc_adapter[card]->devicename,
			newll.buff_offset, newll.msg_len);
		sendmessage(card, CEPID, ceReqTypeLnk, ceReqClass1, ceReqLnkRead,
			rcvmsg->phy_link_no, sizeof(LLData), (unsigned int *)&newll);
	}

}

开发者ID:chm088，项目名称:linux-2.6.18，代码行数:51，代码来源:packet.c

示例14: setl3

/*
 * Set the layer 3 protocol
 */
int setl3(int card, unsigned long channel) 
{
	int protocol = channel >> 8;

	if(!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	adapter[card]->channel[channel].l3_proto = protocol;
	pr_debug("%s: Level 3 protocol for channel %d set to %s\n",
		adapter[card]->devicename, channel+1, l3protos[protocol]);
	return 0;
}

开发者ID:chinnyannieb，项目名称:empeg-hijack，代码行数:17，代码来源:command.c

示例15: seteaz

static int seteaz(int card, unsigned long arg, char *num)
{
	if(!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	strcpy(sc_adapter[card]->channel[arg].eazlist, num);
	sc_adapter[card]->channel[arg].eazclear = 0;
	pr_debug("%s: EAZ list for channel %lu set to: %s\n",
		sc_adapter[card]->devicename, arg+1,
		sc_adapter[card]->channel[arg].eazlist);
	return 0;
}

开发者ID:Vincentxiaojie，项目名称:xpenology，代码行数:14，代码来源:command.c

示例16: receivemessage

/*
 * receive a message from the board
 */
int receivemessage(int card, RspMessage *rspmsg) 
{
	DualPortMemory *dpm;
	unsigned long flags;

	if (!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -EINVAL;
	}
	
	pr_debug("%s: Entered receivemessage\n",adapter[card]->devicename);

	/*
	 * See if there are messages waiting
	 */
	if (inb(adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA) {
		/*
		 * Map in the DPM to the base page and copy the message
		 */
		save_flags(flags);
		cli();
		outb((adapter[card]->shmem_magic >> 14) | 0x80,
			adapter[card]->ioport[adapter[card]->shmem_pgport]); 
		dpm = (DualPortMemory *) adapter[card]->rambase;
		memcpy_fromio(rspmsg, &(dpm->rsp_queue[dpm->rsp_tail]), 
			MSG_LEN);
		dpm->rsp_tail = (dpm->rsp_tail+1) % MAX_MESSAGES;
		inb(adapter[card]->ioport[FIFO_READ]);
		restore_flags(flags);
		
		/*
		 * Tell the board that the message is received
		 */
		pr_debug("%s: Received Message seq:%d pid:%d time:%d cmd:%d "
				"cnt:%d (type,class,code):(%d,%d,%d) "
				"link:%d stat:0x%x\n",
					adapter[card]->devicename,
					rspmsg->sequence_no,
					rspmsg->process_id,
					rspmsg->time_stamp,
					rspmsg->cmd_sequence_no,
					rspmsg->msg_byte_cnt,
					rspmsg->type,
					rspmsg->class,
					rspmsg->code,
					rspmsg->phy_link_no, 
					rspmsg->rsp_status);

		return 0;
	}

开发者ID:dmgerman，项目名称:original，代码行数:53，代码来源:message.c

示例17: receivemessage

int receivemessage(int card, RspMessage *rspmsg)
{
	DualPortMemory *dpm;
	unsigned long flags;

	if (!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -EINVAL;
	}

	pr_debug("%s: Entered receivemessage\n",
		 sc_adapter[card]->devicename);

	/*
                                     
  */
	if (inb(sc_adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA) {
		/*
                                                         
   */
		spin_lock_irqsave(&sc_adapter[card]->lock, flags);
		outb((sc_adapter[card]->shmem_magic >> 14) | 0x80,
		     sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
		dpm = (DualPortMemory *) sc_adapter[card]->rambase;
		memcpy_fromio(rspmsg, &(dpm->rsp_queue[dpm->rsp_tail]),
			      MSG_LEN);
		dpm->rsp_tail = (dpm->rsp_tail + 1) % MAX_MESSAGES;
		inb(sc_adapter[card]->ioport[FIFO_READ]);
		spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
		/*
                                                
   */
		pr_debug("%s: Received Message seq:%d pid:%d time:%d cmd:%d "
			 "cnt:%d (type,class,code):(%d,%d,%d) "
			 "link:%d stat:0x%x\n",
			 sc_adapter[card]->devicename,
			 rspmsg->sequence_no,
			 rspmsg->process_id,
			 rspmsg->time_stamp,
			 rspmsg->cmd_sequence_no,
			 rspmsg->msg_byte_cnt,
			 rspmsg->type,
			 rspmsg->class,
			 rspmsg->code,
			 rspmsg->phy_link_no,
			 rspmsg->rsp_status);

		return 0;
	}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:49，代码来源:message.c

示例18: startproc

int startproc(int card)
{
	int status;

	if (!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	status = sendmessage(card, CMPID, cmReqType2,
			     cmReqClass0,
			     cmReqStartProc,
			     0, 0, NULL);
	pr_debug("%s: Sent startProc\n", sc_adapter[card]->devicename);

	return status;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:17，代码来源:command.c

示例19: answer

/*
 * Answer an incoming call 
 */
static int answer(int card, unsigned long channel)
{
	if(!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	if(setup_buffers(card, channel+1)) {
		hangup(card, channel+1);
		return -ENOBUFS;
	}

	indicate_status(card, ISDN_STAT_BCONN,channel,NULL);
	pr_debug("%s: Answered incoming call on channel %lu\n",
		sc_adapter[card]->devicename, channel+1);
	return 0;
}

开发者ID:Vincentxiaojie，项目名称:xpenology，代码行数:20，代码来源:command.c

示例20: loopback

/*
 * Confirm our ability to communicate with the board.  This test assumes no
 * other message activity is present
 */
int loopback(int card) 
{

	int status;
	static char testmsg[] = "Test Message";
	RspMessage rspmsg;

	if(!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -ENODEV;
	}

	pr_debug("%s: Sending loopback message\n", adapter[card]->devicename);
	

	/*
	 * Send the loopback message to confirm that memory transfer is
	 * operational
	 */
	status = send_and_receive(card, CMPID, cmReqType1,
				  cmReqClass0,
				  cmReqMsgLpbk,
				  0,
				  (unsigned char) strlen(testmsg),
				  (unsigned char *)testmsg,
				  &rspmsg, SAR_TIMEOUT);


	if (!status) {
		pr_debug("%s: Loopback message successfully sent\n",
			adapter[card]->devicename);
		if(strcmp(rspmsg.msg_data.byte_array, testmsg)) {
			pr_debug("%s: Loopback return != sent\n",
				adapter[card]->devicename);
			return -EIO;
		}
		return 0;
	}
	else {
		pr_debug("%s: Send loopback message failed\n",
			adapter[card]->devicename);
		return -EIO;
	}

}

开发者ID:chinnyannieb，项目名称:empeg-hijack，代码行数:49，代码来源:command.c

注：本文中的IS_VALID_CARD函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ IS_VALID_STRING函数代码示例发布时间：2022-05-30

C++ IS_VALID函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18253|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9671|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8455|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7859|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ IS_VALID_CARD函数代码示例

示例1: setup_buffers

示例2: memcpy_toshmem

示例3: memset_shmem

示例4: reset

示例5: setl2

示例6: dial

示例7: getl3

示例8: setl3

示例9: command

示例10: clreaz

示例11: getsil

示例12: setsil

示例13: rcvpkt

示例14: setl3

示例15: seteaz

示例16: receivemessage

示例17: receivemessage

示例18: startproc

示例19: answer

示例20: loopback

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

goldfire/howler.js: Javascript audio lib

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053