C++ IS_WWDG_COUNTER函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中IS_WWDG_COUNTER函数的典型用法代码示例。如果您正苦于以下问题：C++ IS_WWDG_COUNTER函数的具体用法？C++ IS_WWDG_COUNTER怎么用？C++ IS_WWDG_COUNTER使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了IS_WWDG_COUNTER函数的12个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: HAL_WWDG_Init

/**
  * @brief  Initialize the WWDG according to the specified.
  *         parameters in the WWDG_InitTypeDef of  associated handle.
  * @param  hwwdg  pointer to a WWDG_HandleTypeDef structure that contains
  *                the configuration information for the specified WWDG module.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg)
{
  /* Check the WWDG handle allocation */
  if(hwwdg == NULL)
  {
    return HAL_ERROR;
  }

  /* Check the parameters */
  assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
  assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler));
  assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window));
  assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter));
  assert_param(IS_WWDG_EWI_MODE(hwwdg->Init.EWIMode));

  /* Init the low level hardware */
  HAL_WWDG_MspInit(hwwdg);

  /* Set WWDG Counter */
  WRITE_REG(hwwdg->Instance->CR, (WWDG_CR_WDGA | hwwdg->Init.Counter));

  /* Set WWDG Prescaler and Window */
  WRITE_REG(hwwdg->Instance->CFR, (hwwdg->Init.EWIMode | hwwdg->Init.Prescaler | hwwdg->Init.Window));

  /* Return function status */
  return HAL_OK;
}

开发者ID:DjFix，项目名称:jog-dial-ui，代码行数:34，代码来源:stm32f7xx_hal_wwdg.c

示例2: HAL_WWDG_Init

/**
  * @brief  Initializes the WWDG according to the specified
  *         parameters in the WWDG_InitTypeDef and creates the associated handle.
  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
  *              the configuration information for the specified WWDG module.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg)
{
  /* Check the WWDG handle allocation */
  if(hwwdg == HAL_NULL)
  {
    return HAL_ERROR;
  }
  
  /* Check the parameters */
  assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
  assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler));
  assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window)); 
  assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter)); 
  
  if(hwwdg->State == HAL_WWDG_STATE_RESET)
  {
    /* Init the low level hardware */
    HAL_WWDG_MspInit(hwwdg);
  }
  
  /* Change WWDG peripheral state */
  hwwdg->State = HAL_WWDG_STATE_BUSY;

  /* Set WWDG Prescaler and Window */
  MODIFY_REG(hwwdg->Instance->CFR, (WWDG_CFR_WDGTB | WWDG_CFR_W), (hwwdg->Init.Prescaler | hwwdg->Init.Window));

  /* Set WWDG Counter */
  MODIFY_REG(hwwdg->Instance->CR, WWDG_CR_T, hwwdg->Init.Counter);
   
  /* Change WWDG peripheral state */
  hwwdg->State = HAL_WWDG_STATE_READY;
  
  /* Return function status */
  return HAL_OK;
}

开发者ID:1deus，项目名称:tmk_keyboard，代码行数:42，代码来源:stm32l1xx_hal_wwdg.c

示例3: WWDG_SetCounter

/**
  * @简述  设置 WWDG 计数器值.
  * @参数  Counter: 指定看门狗计数器值.
  *                 该参数取值必须在0x40与0x7F之间.
  * @返回  没有
  */
void WWDG_SetCounter(uint8_t Counter)
{
  /* 检查参数 */
  assert_param(IS_WWDG_COUNTER(Counter));
  /* 为配置计数器的值写 T[6:0]位，除了写0到WDG A位没有意义 */
  WWDG->CR = Counter & BIT_Mask;
}

开发者ID:ljqhack，项目名称:seuOS，代码行数:13，代码来源:stm32f10x_wwdg.c

示例4: WWDG_Enable

/*******************************************************************************
* Function Name  : WWDG_Enable
* Description    : Enables WWDG and load the counter value.
*                  - Counter: specifies the watchdog counter value.
*                    This parameter must be a number between 0x40 and 0x7F.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void WWDG_Enable(u8 Counter)
{
  /* Check the parameters */
  assert(IS_WWDG_COUNTER(Counter));

  WWDG->CR = CR_WDGA_Set | Counter;
}

开发者ID:bjzhang，项目名称:stm32f10x，代码行数:16，代码来源:stm32f10x_wwdg.c

示例5: WWDG_SetCounter

/**
  * @brief  Sets the WWDG counter value.
  * @param Counter: specifies the watchdog counter value.
  *   This parameter must be a number between 0x40 and 0x7F.
  * @retval : None
  */
void WWDG_SetCounter (uint8_t Counter)
{
    /* Check the parameters */
    assert_param (IS_WWDG_COUNTER (Counter));
    /* Write to T[6:0] bits to configure the counter value, no need to do a read-modify-write; writing a 0 to WDGA bit does nothing */
    WWDG->CR = Counter & BIT_Mask;
}

开发者ID:MaVo159，项目名称:nitrokey-pro-firmware，代码行数:13，代码来源:stm32f10x_wwdg.c

示例6: HAL_WWDG_Init

/**
  * @brief  Initializes the WWDG according to the specified
  *         parameters in the WWDG_InitTypeDef and creates the associated handle.
  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
  *              the configuration information for the specified WWDG module.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg)
{
    uint32_t tmp = 0;

    /* Check the WWDG handle allocation */
    if(hwwdg == NULL)
    {
        return HAL_ERROR;
    }

    /* Check the parameters */
    assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
    assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler));
    assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window));
    assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter));

    if(hwwdg->State == HAL_WWDG_STATE_RESET)
    {
        /* Init the low level hardware */
        HAL_WWDG_MspInit(hwwdg);
    }

    /* Change WWDG peripheral state */
    hwwdg->State = HAL_WWDG_STATE_BUSY;

    /* Set WWDG Prescaler and Window */
    /* Get the CFR register value */
    tmp = hwwdg->Instance->CFR;

    /* Clear WDGTB[1:0] and W[6:0] bits */
    tmp &= ((uint32_t)~(WWDG_CFR_WDGTB | WWDG_CFR_W));

    /* Prepare the WWDG Prescaler and Window parameters */
    tmp |= hwwdg->Init.Prescaler | hwwdg->Init.Window;

    /* Write to WWDG CFR */
    hwwdg->Instance->CFR = tmp;

    /* Set WWDG Counter */
    /* Get the CR register value */
    tmp = hwwdg->Instance->CR;

    /* Clear T[6:0] bits */
    tmp &= (uint32_t)~((uint32_t)WWDG_CR_T);

    /* Prepare the WWDG Counter parameter */
    tmp |= (hwwdg->Init.Counter);

    /* Write to WWDG CR */
    hwwdg->Instance->CR = tmp;

    /* Change WWDG peripheral state */
    hwwdg->State = HAL_WWDG_STATE_READY;

    /* Return function status */
    return HAL_OK;
}

开发者ID:Ribster，项目名称:Labview，代码行数:64，代码来源:stm32l0xx_hal_wwdg.c

示例7: HAL_WWDG_Refresh

/**
  * @brief  Refreshes the WWDG.
  * @param  hwwdg : pointer to a WWDG_HandleTypeDef structure that contains
  *              the configuration information for the specified WWDG module.
  * @param  Counter: value of counter to put in WWDG counter
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter)
{

  /* Check the parameters */
  assert_param(IS_WWDG_COUNTER(Counter));

  /* Write to WWDG CR the WWDG Counter value to refresh with */
  MODIFY_REG(hwwdg->Instance->CR, (uint32_t)WWDG_CR_T, Counter);
  
  /* Return function status */
  return HAL_OK;
}

开发者ID:AnselZhangGit，项目名称:LoRaMac-node，代码行数:19，代码来源:stm32l0xx_hal_wwdg.c

示例8: HAL_WWDG_Init

/**
  * @brief  Initializes the WWDG according to the specified
  *         parameters in the WWDG_InitTypeDef and creates the associated handle.
  * @param  hwwdg : pointer to a WWDG_HandleTypeDef structure that contains
  *              the configuration information for the specified WWDG module.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg)
{

  /* Check the WWDG handle allocation */
  if(hwwdg == NULL)
  {
    return HAL_ERROR;
  }

  /* Check the parameters */
  assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
  assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler));
  assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window));
  assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter));
  
  if(hwwdg->State == HAL_WWDG_STATE_RESET)
  {
    /* Allocate lock resource and initialize it */
    hwwdg->Lock = HAL_UNLOCKED;

    /* Init the low level hardware */
    HAL_WWDG_MspInit(hwwdg);
  }

  /* Take lock  and change peripheral state */
   __HAL_LOCK(hwwdg);
  hwwdg->State = HAL_WWDG_STATE_BUSY;

   /* Set WWDG Prescaler and Window  and Counter*/
  MODIFY_REG(hwwdg->Instance->CFR, (WWDG_CFR_WDGTB | WWDG_CFR_W), (hwwdg->Init.Prescaler | hwwdg->Init.Window));
  MODIFY_REG(hwwdg->Instance->CR, WWDG_CR_T, hwwdg->Init.Counter);

  /* Change peripheral state and release lock*/
  hwwdg->State = HAL_WWDG_STATE_READY;
  __HAL_UNLOCK(hwwdg);

  /* Return function status */
  return HAL_OK;
}

开发者ID:AnselZhangGit，项目名称:LoRaMac-node，代码行数:46，代码来源:stm32l0xx_hal_wwdg.c

示例9: HAL_WWDG_Refresh

/**
  * @brief  Refreshes the WWDG.
  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
  *              the configuration information for the specified WWDG module.
  * @param  Counter: value of counter to put in WWDG counter
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter)
{
    /* Process Locked */
    __HAL_LOCK(hwwdg);

    /* Change WWDG peripheral state */
    hwwdg->State = HAL_WWDG_STATE_BUSY;

    /* Check the parameters */
    assert_param(IS_WWDG_COUNTER(Counter));

    /* Write to WWDG CR the WWDG Counter value to refresh with */
    MODIFY_REG(hwwdg->Instance->CR, (uint32_t)WWDG_CR_T, Counter);

    /* Change WWDG peripheral state */
    hwwdg->State = HAL_WWDG_STATE_READY;

    /* Process Unlocked */
    __HAL_UNLOCK(hwwdg);

    /* Return function status */
    return HAL_OK;
}

开发者ID:Ribster，项目名称:Labview，代码行数:30，代码来源:stm32l0xx_hal_wwdg.c

示例10: WWDG_Enable

/**
  * @brief  Enables WWDG and load the counter value.                  
  * @param  Counter: specifies the watchdog counter value.
  *          This parameter must be a number between 0x40 and 0x7F (to prevent 
  *          generating an immediate reset).
  * @retval None
  */
void WWDG_Enable(uint8_t Counter)
{
  /* Check the parameters */
  assert_param(IS_WWDG_COUNTER(Counter));
  WWDG->CR = WWDG_CR_WDGA | Counter;
}

开发者ID:Ilydan，项目名称:ROwen，代码行数:13，代码来源:stm32f0xx_wwdg.c

示例11: WWDG_Enable

/**
  * @简述  使能 WWDG 和载入计数器的值.                  
  * @参数  Counter: 指定看门狗载入计数器的值.
  *                 这个参数必须是0x40到0x7F之间的一个数.
  * @返回  没有
  */
void WWDG_Enable(uint8_t Counter)
{
  /* 检查参数 */
  assert_param(IS_WWDG_COUNTER(Counter));
  WWDG->CR = CR_WDGA_Set | Counter;
}

开发者ID:ljqhack，项目名称:seuOS，代码行数:12，代码来源:stm32f10x_wwdg.c

示例12: WWDG_Enable

/**
  * @brief  WWDG_Enable - Enables WWDG and load the counter value.
  * @param  Counter: specifies the watchdog counter value.
  *   This parameter must be a number between 0x00 and 0x7F.
  * @retval None
  */
void WWDG_Enable(uint32_t Counter)
{
  /* Check the parameters */
  assert_param(IS_WWDG_COUNTER(Counter));
  MDR_WWDG->CR = WDGA_Mask | Counter;
}

开发者ID:PeterBeklemishev，项目名称:mila，代码行数:12，代码来源:MDR32F9Qx_wwdg.c

注：本文中的IS_WWDG_COUNTER函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ IS_ZERO函数代码示例发布时间：2022-05-30

C++ IS_WORD函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18253|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9671|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8455|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7859|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ IS_WWDG_COUNTER函数代码示例

示例1: HAL_WWDG_Init

示例2: HAL_WWDG_Init

示例3: WWDG_SetCounter

示例4: WWDG_Enable

示例5: WWDG_SetCounter

示例6: HAL_WWDG_Init

示例7: HAL_WWDG_Refresh

示例8: HAL_WWDG_Init

示例9: HAL_WWDG_Refresh

示例10: WWDG_Enable

示例11: WWDG_Enable

示例12: WWDG_Enable

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

goldfire/howler.js: Javascript audio lib

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053