本文整理汇总了C++中InitCommon函数的典型用法代码示例。如果您正苦于以下问题：C++ InitCommon函数的具体用法？C++ InitCommon怎么用？C++ InitCommon使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了InitCommon函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: InitCommon
vtkProp *mitk::GPUVolumeMapper3D::GetVtkProp(mitk::BaseRenderer *renderer)
{
if (!IsRenderable(renderer))
{
if (!m_Volumenullptr)
{
m_Volumenullptr = vtkSmartPointer<vtkVolume>::New();
m_Volumenullptr->VisibilityOff();
}
return m_Volumenullptr;
}
InitCommon();
InitVtkMapper(renderer);
LocalStorage *ls = m_LSH.GetLocalStorage(renderer);
if (ls->m_rayInitialized)
return ls->m_VolumeRAY;
if (ls->m_gpuInitialized)
return ls->m_VolumeGPU;
return ls->m_VolumeCPU;
}
开发者ID:junaidnaseer，项目名称:MITK，代码行数:25，代码来源:mitkGPUVolumeMapper3D.cpp
示例2: CloneAccelerant
status_t
CloneAccelerant(void* data)
{
// Initialize a copy of the accelerant as a clone. Argument data points to
// a copy of the data which was returned by GetAccelerantCloneInfo().
TRACE("Enter CloneAccelerant()\n");
char path[MAXPATHLEN] = "/dev/";
strcat(path, (const char*)data);
gInfo.deviceFileDesc = open(path, B_READ_WRITE); // open the device
if (gInfo.deviceFileDesc < 0)
return errno;
gInfo.bAccelerantIsClone = true;
status_t result = InitCommon(gInfo.deviceFileDesc);
if (result != B_OK) {
close(gInfo.deviceFileDesc);
return result;
}
result = gInfo.modeListArea = clone_area("ATI cloned display_modes",
(void**) &gInfo.modeList, B_ANY_ADDRESS, B_READ_AREA,
gInfo.sharedInfo->modeArea);
if (result < 0) {
UninitCommon();
close(gInfo.deviceFileDesc);
return result;
}
TRACE("Leave CloneAccelerant()\n");
return B_OK;
}
开发者ID:mmanley，项目名称:Antares，代码行数:35，代码来源:accelerant.cpp
示例3: aui_ImageBase
c3_Radio::c3_Radio(
AUI_ERRCODE *retval,
uint32 id,
sint32 x,
sint32 y,
sint32 width,
sint32 height,
MBCHAR *pattern,
ControlActionCallback *ActionFunc,
void *cookie,
sint32 state,
sint32 numStates )
:
aui_ImageBase( numStates ),
aui_TextBase( NULL ),
aui_Radio( retval, id, x, y, width, height, ActionFunc, cookie, state, numStates ),
PatternBase(pattern)
{
Assert( AUI_SUCCESS(*retval) );
if ( !AUI_SUCCESS(*retval) ) return;
*retval = InitCommon(k_C3_RADIO_DEFAULT_BEVELWIDTH);
Assert( AUI_SUCCESS(*retval) );
if ( !AUI_SUCCESS(*retval) ) return;
}
开发者ID:jleclanche，项目名称:darkdust-ctp2，代码行数:25，代码来源:c3_radio.cpp
示例4: aui_ImageBase
aui_Tab::aui_Tab(
AUI_ERRCODE *retval,
uint32 id,
sint32 x,
sint32 y,
sint32 width,
sint32 height,
sint32 paneWidth,
sint32 paneHeight,
ControlActionCallback *ActionFunc,
void *cookie,
sint32 state,
sint32 numStates )
:
aui_ImageBase( numStates ),
aui_TextBase( NULL ),
aui_Radio( retval, id, x, y, width, height, ActionFunc, cookie, state, numStates )
{
Assert( AUI_SUCCESS(*retval) );
if ( !AUI_SUCCESS(*retval) ) return;
*retval = InitCommon( paneWidth, paneHeight );
Assert( AUI_SUCCESS(*retval) );
if ( !AUI_SUCCESS(*retval) ) return;
}
开发者ID:talentlesshack，项目名称:C2P2，代码行数:25，代码来源:aui_tab.cpp
示例5: DFO_ReadVariableArray
DFO_ReadVariableArray :: DFO_ReadVariableArray() : FuncObjC("Read Variable Array")
{
SetToNull(varArrayFname);
varArrayFileFormat = IO_VariableArray::vffPaCalc;
InitCommon();
}
开发者ID:jjayne，项目名称:nSIGHTS，代码行数:7，代码来源:DFO_ReadVariableArray.cpp
示例6: DFO_GridExtractXY
DFO_GridExtractXY :: DFO_GridExtractXY() :
FuncObjC("Extract XY from Grid"), extractValMS("Extract XY")
{
extractX = true;
logInterp = false;
InitCommon();
}
开发者ID:jjayne，项目名称:nSIGHTS，代码行数:7，代码来源:DFO_GridExtractXY.cpp
示例7: InitCommon
void mitk::GPUVolumeMapper3D::GenerateDataForRenderer( mitk::BaseRenderer *renderer )
{
if(!IsRenderable(renderer))
return;
InitCommon();
InitVtkMapper( renderer );
mitk::Image *input = const_cast< mitk::Image * >( this->GetInput() );
vtkImageData *inputData = input->GetVtkImageData( this->GetTimestep() );
m_UnitSpacingImageFilter->SetInput( inputData );
LocalStorage *ls = m_LSH.GetLocalStorage(renderer);
// Only with VTK 5.6 or above
#if ((VTK_MAJOR_VERSION > 5) || ((VTK_MAJOR_VERSION==5) && (VTK_MINOR_VERSION>=6) ))
if(ls->m_rayInitialized)
{
GenerateDataRAY(renderer);
}
else
#endif
if(ls->m_gpuInitialized)
{
GenerateDataGPU(renderer);
}
else
{
GenerateDataCPU(renderer);
}
// UpdateTransferFunctions
UpdateTransferFunctions( renderer );
}
开发者ID:fmorency，项目名称:MITK，代码行数:35，代码来源:mitkGPUVolumeMapper3D.cpp
示例8:
aui_Control::aui_Control
(
AUI_ERRCODE * retval,
uint32 id,
sint32 x,
sint32 y,
sint32 width,
sint32 height,
ControlActionCallback * ActionFunc,
void * cookie
)
:
aui_ImageBase ((sint32) 0),
aui_TextBase (NULL),
aui_Region (retval, id, x, y, width, height),
aui_SoundBase ((MBCHAR **) NULL),
m_stringTable (NULL),
m_allocatedTip (false),
m_statusText (NULL),
m_numberOfLayers (0),
m_imagesPerLayer (0),
m_imageLayerList (NULL),
m_layerRenderFlags (NULL),
m_renderFlags (k_AUI_CONTROL_LAYER_FLAG_ALWAYS),
m_statusTextCopy (NULL)
{
if (AUI_SUCCESS(*retval))
{
*retval = InitCommon(ActionFunc, cookie);
}
}
开发者ID:jleclanche，项目名称:darkdust-ctp2，代码行数:31，代码来源:aui_control.cpp
示例9: __declspec
//Plugin extern function
void __declspec(dllexport) Capture(PLUGINDATA *pd)
{
pd->dwSupport|=PDS_SUPPORTALL;
if (pd->dwSupport & PDS_GETSUPPORT)
return;
if (!bInitCommon)
InitCommon(pd);
else if (!bInitCapture)
ReadOptions(OF_CAPTURE);
if (bInitCapture)
{
DestroyDock(hWndCaptureDlg, DKT_KEEPAUTOLOAD);
//Stay in memory and show as non-active
pd->nUnload=UD_NONUNLOAD_NONACTIVE;
}
else
{
InitMain();
InitCapture();
pfCapture=pd->lpPluginFunction;
bCaptureDockWaitResize=pd->bOnStart;
CreateDock(&hWndCaptureDlg, &dkCaptureDlg, !bCaptureDockWaitResize);
//Stay in memory, and show as active
pd->nUnload=UD_NONUNLOAD_ACTIVE;
}
}
开发者ID:embassy，项目名称:AkelPad，代码行数:32，代码来源:Clipboard.c
示例10: FuncObjC
DFO_CreateReal::DFO_CreateReal(const DFO_CreateReal& a) :
FuncObjC(a),
rvalMS(a.rvalMS)
{
LocalCopy(a);
InitCommon();
}
开发者ID:jjayne，项目名称:nSIGHTS，代码行数:7，代码来源:DFO_CreateReal.cpp
示例11: DFO_BlendColorMap
DFO_BlendColorMap :: DFO_BlendColorMap() :
FuncObjC("Blend Color Maps"),
tValMS("Blend T")
{
tValMS.enteredRealValue = 0.5;
InitCommon();
}
开发者ID:jjayne，项目名称:nSIGHTS，代码行数:7，代码来源:DFO_BlendColorMap.cpp
示例12: DFO_CreateReal
DFO_CreateReal :: DFO_CreateReal() :
FuncObjC("Create Real Value"),
rvalMS("CreateValue")
{
CopyString(realDesc, "Output value", descMaxLen);
InitCommon();
}
开发者ID:jjayne，项目名称:nSIGHTS，代码行数:7，代码来源:DFO_CreateReal.cpp
示例13: DFO_Histogram
DFO_TableHistogram::DFO_TableHistogram(const DFO_TableHistogram& a) :
DFO_Histogram(a),
DSC_TableColSel(a)
{
LocalCopy(a);
InitCommon();
}
开发者ID:jjayne，项目名称:nSIGHTS，代码行数:7，代码来源:DFO_TableHistogram.cpp
示例14: aui_ImageBase
aui_MovieButton::aui_MovieButton(
AUI_ERRCODE *retval,
uint32 id,
sint32 x,
sint32 y,
sint32 width,
sint32 height,
MBCHAR *movie,
ControlActionCallback *ActionFunc,
void *cookie )
:
aui_ImageBase( (sint32)0 ),
aui_TextBase( NULL ),
aui_Button( retval, id, x, y, width, height, ActionFunc, cookie )
{
m_flags = 0;
m_fullScreen = false;
Assert( AUI_SUCCESS(*retval) );
if ( !AUI_SUCCESS(*retval) ) return;
*retval = InitCommon( movie );
Assert( AUI_SUCCESS(*retval) );
if ( !AUI_SUCCESS(*retval) ) return;
}
开发者ID:jleclanche，项目名称:darkdust-ctp2，代码行数:25，代码来源:aui_moviebutton.cpp
示例15: Assert
AUI_ERRCODE c3_HyperTipWindow::InitCommonLdl( MBCHAR *ldlBlock )
{
ldl_datablock * block = aui_Ldl::FindDataBlock(ldlBlock);
Assert( block != NULL );
if ( !block ) return AUI_ERRCODE_LDLFINDDATABLOCKFAILED;
AUI_ERRCODE errcode = InitCommon();
Assert( AUI_SUCCESS(errcode) );
if ( !AUI_SUCCESS(errcode) ) return errcode;
MBCHAR tipBlock[ k_AUI_LDL_MAXBLOCK + 1 ];
sprintf( tipBlock, "%s.%s", ldlBlock, k_C3_HYPERTIPWINDOW_LDL_TIP );
if (aui_Ldl::GetLdl()->FindDataBlock( tipBlock ) )
{
m_hyperTip = new aui_HyperTextBox(
&errcode,
aui_UniqueId(),
tipBlock );
Assert( AUI_NEWOK(m_hyperTip,errcode) );
if ( !AUI_NEWOK(m_hyperTip,errcode) ) return errcode;
m_hyperTip->SetBlindness( TRUE );
m_hyperTip->TextReloadFont();
aui_Ldl::Remove( m_hyperTip );
m_allocatedHyperTip = TRUE;
AddChild( m_hyperTip );
m_hyperTip->Move( 0, 0 );
m_hyperTip->Resize( m_width-5, m_height-10 );
}
return AUI_ERRCODE_OK;
}
开发者ID:jleclanche，项目名称:darkdust-ctp2，代码行数:35，代码来源:c3_hypertipwindow.cpp
示例16: FuncObjC
DFO_TableColumnSort::DFO_TableColumnSort(const DFO_TableColumnSort& a) :
FuncObjC(a),
DSC_TableColSel(a)
{
LocalCopy(a);
InitCommon();
}
开发者ID:jjayne，项目名称:nSIGHTS，代码行数:7，代码来源:DFO_TableColumnSort.cpp
示例17: dGeomTriMeshDataCreate
void cPhysicsObject::CreateTrimesh(cWorld* pWorld, const std::vector<spitfire::math::cVec3>& coords, const std::vector<unsigned int>& indices, const physvec_t& pos, const physvec_t& rot)
{
vVertices = coords;
vIndices = indices;
bBody = false;
bDynamic = false;
// Trimeshes are static for the moment
v[0] = 0.0f;
v[1] = 0.0f;
v[2] = 0.0f;
dTriMeshDataID trimeshData = dGeomTriMeshDataCreate();
const int VertexCount = vVertices.size();
const int IndexCount = vIndices.size();
dGeomTriMeshDataBuildSingle(
trimeshData,
(const void*)vVertices.data(), sizeof(spitfire::math::cVec3), (int)VertexCount, // Faces
(const void*)vIndices.data(), (int)IndexCount, 3 * sizeof(uint32_t) // Indices
);
geom = dCreateTriMesh(pWorld->GetSpaceStatic(), trimeshData, NULL , NULL , NULL);
InitCommon(pWorld, pos, rot);
}
开发者ID:pilkch，项目名称:library，代码行数:28，代码来源:cPhysicsObject.cpp
示例18: aui_ImageBase
ctp2_HyperTextBox::ctp2_HyperTextBox(
AUI_ERRCODE *retval,
uint32 id,
sint32 x,
sint32 y,
sint32 width,
sint32 height,
MBCHAR *pattern,
ControlActionCallback *ActionFunc,
void *cookie )
:
aui_ImageBase( (sint32)0 ),
aui_TextBase( NULL ),
aui_HyperTextBox(retval, id, x,y, width, height, ActionFunc, cookie),
PatternBase(pattern)
{
Assert( AUI_SUCCESS(*retval) );
if ( !AUI_SUCCESS(*retval) ) return;
*retval = InitCommon();
Assert( AUI_SUCCESS(*retval) );
if ( !AUI_SUCCESS(*retval) ) return;
*retval = CreateRanger( NULL );
Assert( AUI_SUCCESS(*retval) );
}
开发者ID:talentlesshack，项目名称:C2P2，代码行数:26，代码来源:ctp2_hypertextbox.cpp
示例19: FuncObjC
DFO_TableCalibrationStatistics::DFO_TableCalibrationStatistics(const DFO_TableCalibrationStatistics& a) :
FuncObjC(a),
DSC_TableColSel(a)
{
LocalCopy(a);
InitCommon();
}
开发者ID:jjayne，项目名称:nSIGHTS，代码行数:7，代码来源:DFO_TableCalibrationStatistics.cpp
示例20:
aui_Shell::aui_Shell(
AUI_ERRCODE *retval )
{
*retval = InitCommon();
Assert( AUI_SUCCESS(*retval) );
if ( !AUI_SUCCESS(*retval) ) return;
}
开发者ID:jleclanche，项目名称:darkdust-ctp2，代码行数:7，代码来源:aui_shell.cpp
注：本文中的InitCommon函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论