C++ InitTimers函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中InitTimers函数的典型用法代码示例。如果您正苦于以下问题：C++ InitTimers函数的具体用法？C++ InitTimers怎么用？C++ InitTimers使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了InitTimers函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main

void main()
{
  InitSystemClock();
  InitPortsIO();  
  InitTimers();
  EnableInterrupts(); 
  while (1)
  {    
    GENSendPacketIR(0x00,0xF7,0x20,0xDF); //Led "Game"
    GENDelay100Us(500);
    GENSendPacketIR(0x00,0xF7,0xA0,0x5E); //Led "TV"
    GENDelay100Us(500);
    GENSendPacketIR(0x00,0xFC,0xA1,0x5E); //Led "DVD"
    GENDelay100Us(500);
    /*GENSendPacketIR(0x03,0xFC,0x51,0xAE); //Led "CD/MP3" 
    GENDelay100Us(500);
    GENSendPacketIR(0x03,0xFC,0x11,0xEE); //Led "Game"
    GENDelay100Us(500);
    GENSendPacketIR(0x03,0xFC,0xB1,0x4E); //Led "TV"
    GENDelay100Us(500);
    GENSendPacketIR(0x03,0xFC,0xA1,0x5E); //Led "DVD"
    GENDelay100Us(500);    
    GENSendPacketIR(0x03,0xFC,0xB1,0x4E); //Led "TV"
    GENDelay100Us(500);
    GENSendPacketIR(0x03,0xFC,0x11,0xEE); //Led "Game"
    GENDelay100Us(500);   */
  }
}

开发者ID:edosedgar，项目名称:stm8s，代码行数:28，代码来源:main.c

示例2: ParMETIS_V3_PartGeom

/***********************************************************************************
* This function is the entry point of the parallel ordering algorithm.
* This function assumes that the graph is already nice partitioned among the
* processors and then proceeds to perform recursive bisection.
************************************************************************************/
void ParMETIS_V3_PartGeom(idxtype *vtxdist, int *ndims, float *xyz, idxtype *part, MPI_Comm *comm)
{
  int i, npes, mype, nvtxs, firstvtx, dbglvl;
  idxtype *xadj, *adjncy;
  CtrlType ctrl;
  WorkSpaceType wspace;
  GraphType *graph;
  int zeroflg = 0;

  MPI_Comm_size(*comm, &npes);
  MPI_Comm_rank(*comm, &mype);

  if (npes == 1) {
    idxset(vtxdist[mype+1]-vtxdist[mype], 0, part);
    return;
  }

  /* Setup a fake graph to allow the rest of the code to work unchanged */
  dbglvl = 0;

  nvtxs = vtxdist[mype+1]-vtxdist[mype];
  firstvtx = vtxdist[mype];
  xadj = idxmalloc(nvtxs+1, "ParMETIS_PartGeom: xadj");
  adjncy = idxmalloc(nvtxs, "ParMETIS_PartGeom: adjncy");
  for (i=0; i<nvtxs; i++) {
    xadj[i] = i;
    adjncy[i] = firstvtx + (i+1)%nvtxs;
  }
  xadj[nvtxs] = nvtxs;

  /* Proceed with the rest of the code */
  SetUpCtrl(&ctrl, npes, dbglvl, *comm);
  ctrl.seed      = mype;
  ctrl.CoarsenTo = amin(vtxdist[npes]+1, 25*npes);

  graph = Moc_SetUpGraph(&ctrl, 1, vtxdist, xadj, NULL, adjncy, NULL, &zeroflg);

  PreAllocateMemory(&ctrl, graph, &wspace);

  /*=======================================================
   * Compute the initial geometric partitioning
   =======================================================*/
  IFSET(ctrl.dbglvl, DBG_TIME, InitTimers(&ctrl));
  IFSET(ctrl.dbglvl, DBG_TIME, MPI_Barrier(ctrl.gcomm));
  IFSET(ctrl.dbglvl, DBG_TIME, starttimer(ctrl.TotalTmr));

  Coordinate_Partition(&ctrl, graph, *ndims, xyz, 0, &wspace);

  idxcopy(graph->nvtxs, graph->where, part);

  IFSET(ctrl.dbglvl, DBG_TIME, MPI_Barrier(ctrl.gcomm));
  IFSET(ctrl.dbglvl, DBG_TIME, stoptimer(ctrl.TotalTmr));
  IFSET(ctrl.dbglvl, DBG_TIME, PrintTimingInfo(&ctrl));

  FreeInitialGraphAndRemap(graph, 0);
  FreeWSpace(&wspace);
  FreeCtrl(&ctrl);

  GKfree((void **)&xadj, (void **)&adjncy, LTERM);
}

开发者ID:KnoooW，项目名称:gpgpu-sim，代码行数:65，代码来源:gkmetis.c

示例3: METIS_WPartGraphRecursive

/*************************************************************************
* This function is the entry point for PWMETIS that accepts exact weights
* for the target partitions
**************************************************************************/
void METIS_WPartGraphRecursive(int *nvtxs, idxtype *xadj, idxtype *adjncy, idxtype *vwgt, 
                               idxtype *adjwgt, int *wgtflag, int *numflag, int *nparts, 
                               floattype *tpwgts, int *options, int *edgecut, idxtype *part)
{
  int i, j;
  GraphType graph;
  CtrlType ctrl;
  floattype *mytpwgts;

  if (*numflag == 1)
    Change2CNumbering(*nvtxs, xadj, adjncy);

  SetUpGraph(&graph, OP_PMETIS, *nvtxs, 1, xadj, adjncy, vwgt, adjwgt, *wgtflag);

  if (options[0] == 0) {  /* Use the default parameters */
    ctrl.CType = PMETIS_CTYPE;
    ctrl.IType = PMETIS_ITYPE;
    ctrl.RType = PMETIS_RTYPE;
    ctrl.dbglvl = PMETIS_DBGLVL;
  }
  else {
    ctrl.CType = options[OPTION_CTYPE];
    ctrl.IType = options[OPTION_ITYPE];
    ctrl.RType = options[OPTION_RTYPE];
    ctrl.dbglvl = options[OPTION_DBGLVL];
  }
  ctrl.optype = OP_PMETIS;
  ctrl.CoarsenTo = 20;
  ctrl.maxvwgt = 1.5*(idxsum(*nvtxs, graph.vwgt)/ctrl.CoarsenTo);

  mytpwgts = fmalloc(*nparts, "PWMETIS: mytpwgts");
  for (i=0; i<*nparts; i++) 
    mytpwgts[i] = tpwgts[i];

  InitRandom(-1);

  AllocateWorkSpace(&ctrl, &graph, *nparts);

  IFSET(ctrl.dbglvl, DBG_TIME, InitTimers(&ctrl));
  IFSET(ctrl.dbglvl, DBG_TIME, starttimer(ctrl.TotalTmr));

  *edgecut = MlevelRecursiveBisection(&ctrl, &graph, *nparts, part, mytpwgts, 1.000, 0);

  IFSET(ctrl.dbglvl, DBG_TIME, stoptimer(ctrl.TotalTmr));
  IFSET(ctrl.dbglvl, DBG_TIME, PrintTimers(&ctrl));

  FreeWorkSpace(&ctrl, &graph);
  free(mytpwgts);

  if (*numflag == 1)
    Change2FNumbering(*nvtxs, xadj, adjncy, part);
}

开发者ID:davidheryanto，项目名称:sc14，代码行数:56，代码来源:pmetis.c

示例4: METIS_EdgeND

/*************************************************************************
* This function is the entry point for OEMETIS
**************************************************************************/
void METIS_EdgeND(int *nvtxs, idxtype *xadj, idxtype *adjncy, int *numflag, int *options, 
                  idxtype *perm, idxtype *iperm) 
{
  int i, j;
  GraphType graph;
  CtrlType ctrl;

  if (*numflag == 1)
    Change2CNumbering(*nvtxs, xadj, adjncy);

  SetUpGraph(&graph, OP_OEMETIS, *nvtxs, 1, xadj, adjncy, NULL, NULL, 0);

  if (options[0] == 0) {  /* Use the default parameters */
    ctrl.CType = OEMETIS_CTYPE;
    ctrl.IType = OEMETIS_ITYPE;
    ctrl.RType = OEMETIS_RTYPE;
    ctrl.dbglvl = OEMETIS_DBGLVL;
  }
  else {
    ctrl.CType = options[OPTION_CTYPE];
    ctrl.IType = options[OPTION_ITYPE];
    ctrl.RType = options[OPTION_RTYPE];
    ctrl.dbglvl = options[OPTION_DBGLVL];
  }
  ctrl.oflags  = 0;
  ctrl.pfactor = -1;
  ctrl.nseps   = 1;

  ctrl.optype = OP_OEMETIS;
  ctrl.CoarsenTo = 20;
  ctrl.maxvwgt = 1.5*(idxsum(*nvtxs, graph.vwgt)/ctrl.CoarsenTo);

  InitRandom(-1);

  AllocateWorkSpace(&ctrl, &graph, 2);

  IFSET(ctrl.dbglvl, DBG_TIME, InitTimers(&ctrl));
  IFSET(ctrl.dbglvl, DBG_TIME, starttimer(ctrl.TotalTmr));

  MlevelNestedDissection(&ctrl, &graph, iperm, ORDER_UNBALANCE_FRACTION, *nvtxs);

  IFSET(ctrl.dbglvl, DBG_TIME, stoptimer(ctrl.TotalTmr));
  IFSET(ctrl.dbglvl, DBG_TIME, PrintTimers(&ctrl));

  for (i=0; i<*nvtxs; i++)
    perm[iperm[i]] = i;

  FreeWorkSpace(&ctrl, &graph);

  if (*numflag == 1)
    Change2FNumberingOrder(*nvtxs, xadj, adjncy, perm, iperm);
}

开发者ID:iyer-arvind，项目名称:gmsh，代码行数:55，代码来源:ometis.c

示例5: MCUInit

/**
 *  @fn void MCUInit()
 *
 *  @brief Sets the microcontroller to a predetermined state. Handles initialization
 *         for all categories of peripherals: Analog, Architecture, Communication,
 *         Data Converters, GPIO, LCD, Special Modules, Timers.
 *
 */
void MCUInit()
{
  #if defined(__MCU_MSP430_SERIES)
    InitAnalog();				                                // Initialize the Analog modules
    InitArchitecture();			                                        // Initialize the Architecture modules
    InitCommunication();			                                // Initialize the Communication modules
    InitDataConverters();			                                // Initialize the Data Converter modules
    InitGPIO();				                                        // Initialize the GPIO modules
    InitLCD();				                                        // Initialize the LCD modules
    InitSpecialModules();			                                // Initialize the Special modules
    InitTimers();				                                // Initialize the Timers modules
  #endif
}

开发者ID:botbench，项目名称:mspdev，代码行数:21，代码来源:MCUInterface.c

示例6: InitBoard

/*
 * Initialize the board
 * Timers, Communication, etc
 * Note : Should only be called once at the begginning of the main
 */
void InitBoard(void)
{
    // Initialize clock
    SYSTEMConfigPerformance(GetSystemClock());
    SYSTEMConfig(GetSystemClock(), SYS_CFG_PCACHE);
    SYSTEMConfig(GetSystemClock(), SYS_CFG_PB_BUS);
    SYSTEMConfigPB(GetSystemClock());
    INTEnableSystemMultiVectoredInt();

    //Disable JTAG port
    DDPCONbits.JTAGEN = 0;

    // Initialize LEDs
    LED1_TRIS = 0;
    LED2_TRIS = 0;

    // Initialize Timers
    InitTimers();

    // Initialize CAN bus
    CRX1_TRIS = 1;
    CTX1_TRIS = 0;
    netv_init_can_driver(GetBoardID(),CAN1);
    
    // Initialize digital IOs as inputs
    DIO_TRIS |= DIO_MASK;
    
    // Initialize Relays (low)
    RELAY1_TRIS = 0;
    RELAY2_TRIS = 0;
    RELAY1 = 0;
    RELAY2 = 0;
    
    // Initialize SPI pins as inputs
    SPICLK_TRIS = 1;
    SPISDO_TRIS	= 1;
    SPI_CS_TRIS = 1;
    SPISDI_TRIS	= 1;
    
    //TODO: Init unused pins as inputs
    
    // Read the board ID
    m_unBoardId = (DIO_PORT & DIO_MASK) ^ DIO_MASK;

    // Read the parameters previously saved in flash
    loadDataFromMemory();
    
    //Enables the core to handle any pending interrupt requests
    asm volatile ("ei"); 
}

开发者ID:doumdi，项目名称:ProjetVUE_VUE32，代码行数:55，代码来源:Board.c

示例7: METIS_mCPartGraphKway

/*************************************************************************
* This function is the entry point for KWMETIS
**************************************************************************/
void METIS_mCPartGraphKway(int *nvtxs, int *ncon, idxtype *xadj, idxtype *adjncy, 
                          idxtype *vwgt, idxtype *adjwgt, int *wgtflag, int *numflag, 
                          int *nparts, floattype *rubvec, int *options, int *edgecut, 
                          idxtype *part)
{
  int i, j;
  GraphType graph;
  CtrlType ctrl;

  if (*numflag == 1)
    Change2CNumbering(*nvtxs, xadj, adjncy);

  SetUpGraph(&graph, OP_KMETIS, *nvtxs, *ncon, xadj, adjncy, vwgt, adjwgt, *wgtflag);

  if (options[0] == 0) {  /* Use the default parameters */
    ctrl.CType  = McKMETIS_CTYPE;
    ctrl.IType  = McKMETIS_ITYPE;
    ctrl.RType  = McKMETIS_RTYPE;
    ctrl.dbglvl = McKMETIS_DBGLVL;
  }
  else {
    ctrl.CType  = options[OPTION_CTYPE];
    ctrl.IType  = options[OPTION_ITYPE];
    ctrl.RType  = options[OPTION_RTYPE];
    ctrl.dbglvl = options[OPTION_DBGLVL];
  }
  ctrl.optype = OP_KMETIS;
  ctrl.CoarsenTo = amax((*nvtxs)/(20*log2Int(*nparts)), 30*(*nparts));

  ctrl.nmaxvwgt = 1.5/(1.0*ctrl.CoarsenTo);

  InitRandom(-1);

  AllocateWorkSpace(&ctrl, &graph, *nparts);

  IFSET(ctrl.dbglvl, DBG_TIME, InitTimers(&ctrl));
  IFSET(ctrl.dbglvl, DBG_TIME, starttimer(ctrl.TotalTmr));

  ASSERT(CheckGraph(&graph));
  *edgecut = MCMlevelKWayPartitioning(&ctrl, &graph, *nparts, part, rubvec);

  IFSET(ctrl.dbglvl, DBG_TIME, stoptimer(ctrl.TotalTmr));
  IFSET(ctrl.dbglvl, DBG_TIME, PrintTimers(&ctrl));

  FreeWorkSpace(&ctrl, &graph);

  if (*numflag == 1)
    Change2FNumbering(*nvtxs, xadj, adjncy, part);
}

开发者ID:davidheryanto，项目名称:sc14，代码行数:52，代码来源:mkmetis.c

示例8: main

void main ()
{

	// Initializing PIC16LF1827
	InitPorts();
	InitTimers();
	InitInterrupts();
	while(1)
	{

	}



}

开发者ID:humbleSeraph，项目名称:PIC16LF1827_Runway，代码行数:15，代码来源:Proto1_mplabx.c

示例9: main

/***********LED Blinky Example**********************************************************************/
int main()
{
	LPC_GPIO0->FIODIR |= (1 << 22); // set P0.22 to output
	LPC_GPIO0->FIOPIN &= ~(1 << 22); //and turn the LED off.
	InitTimers(); //initialize the timer;
	can_init(125000);
	//CAN_Init(LPC_CAN2, 125000);

	OLCB_NodeID *id = new OLCB_NodeID(1,2,3,4,5,6);

	while(1)
	{
		LPC_GPIO0->FIOPIN ^= (1 << 22); // Toggle P1.29
		delay(500);
	}
	return 0;
}

开发者ID:kphannan，项目名称:OpenLCB，代码行数:18，代码来源:main.cpp

示例10: METIS_WPartGraphKway2

/*************************************************************************
* This function is the entry point for KWMETIS with seed specification
* in options[7] 
**************************************************************************/
void METIS_WPartGraphKway2(idxtype *nvtxs, idxtype *xadj, idxtype *adjncy, idxtype *vwgt, 
                          idxtype *adjwgt, idxtype *wgtflag, idxtype *numflag, idxtype *nparts, 
                          float *tpwgts, idxtype *options, idxtype *edgecut, idxtype *part)
{
  idxtype i, j;
  GraphType graph;
  CtrlType ctrl;

  if (*numflag == 1)
    Change2CNumbering(*nvtxs, xadj, adjncy);

  SetUpGraph(&graph, OP_KMETIS, *nvtxs, 1, xadj, adjncy, vwgt, adjwgt, *wgtflag);

  if (options[0] == 0) {  /* Use the default parameters */
    ctrl.CType = KMETIS_CTYPE;
    ctrl.IType = KMETIS_ITYPE;
    ctrl.RType = KMETIS_RTYPE;
    ctrl.dbglvl = KMETIS_DBGLVL;
  }
  else {
    ctrl.CType = options[OPTION_CTYPE];
    ctrl.IType = options[OPTION_ITYPE];
    ctrl.RType = options[OPTION_RTYPE];
    ctrl.dbglvl = options[OPTION_DBGLVL];
  }
  ctrl.optype = OP_KMETIS;
  ctrl.CoarsenTo = 20*(*nparts);
  ctrl.maxvwgt = 1.5*((graph.vwgt ? idxsum(*nvtxs, graph.vwgt, 1) : (*nvtxs))/ctrl.CoarsenTo);

  InitRandom(options[7]);

  AllocateWorkSpace(&ctrl, &graph, *nparts);

  IFSET(ctrl.dbglvl, DBG_TIME, InitTimers(&ctrl));
  IFSET(ctrl.dbglvl, DBG_TIME, gk_startcputimer(ctrl.TotalTmr));

  *edgecut = MlevelKWayPartitioning(&ctrl, &graph, *nparts, part, tpwgts, 1.03);

  IFSET(ctrl.dbglvl, DBG_TIME, gk_stopcputimer(ctrl.TotalTmr));
  IFSET(ctrl.dbglvl, DBG_TIME, PrintTimers(&ctrl));

  FreeWorkSpace(&ctrl, &graph);

  if (*numflag == 1)
    Change2FNumbering(*nvtxs, xadj, adjncy, part);
}

开发者ID:educharlie，项目名称:HNA-Algorithm，代码行数:50，代码来源:parmetis.c

示例11: ClassicLadder_InitAllDatas

void ClassicLadder_InitAllDatas( void )
{
	InitVars();
#ifdef OLD_TIMERS_MONOS_SUPPORT
	InitTimers();
	InitMonostables();
#endif
	InitCounters();
	InitTimersIEC();
	InitArithmExpr();
	InitRungs();
	InitSections( );
#ifdef SEQUENTIAL_SUPPORT
	InitSequential( );
#endif
	InitSymbols( );
}

开发者ID:13788593535，项目名称:machinekit，代码行数:17，代码来源:arrays.c

示例12: ParMETIS_FusedElementGraph

/***********************************************************************************
* This function creates the fused-element-graph and returns the partition
************************************************************************************/
void ParMETIS_FusedElementGraph(idxtype *vtxdist, idxtype *xadj, realtype *vvol,
              realtype *vsurf, idxtype *adjncy, idxtype *vwgt, realtype *adjwgt,
              int *wgtflag, int *numflag, int *nparts, int *options,
              idxtype *part, MPI_Comm *comm)
{
  int npes, mype, nvtxs;
  CtrlType ctrl;
  WorkSpaceType wspace;
  GraphType *graph;

  MPI_Comm_size(*comm, &npes);
  MPI_Comm_rank(*comm, &mype);

  nvtxs = vtxdist[mype+1]-vtxdist[mype];

  /* IFSET(options[OPTION_DBGLVL], DBG_TRACK, printf("%d ParMETIS_FEG npes=%d\n",mype, npes)); */

  SetUpCtrl(&ctrl, *nparts, options, *comm);
  ctrl.CoarsenTo = amin(vtxdist[npes]+1, 25*amax(npes, *nparts));

  graph = SetUpGraph(&ctrl, vtxdist, xadj, vwgt, adjncy, adjwgt, *wgtflag);

  graph->where = part;

  PreAllocateMemory(&ctrl, graph, &wspace);

  IFSET(ctrl.dbglvl, DBG_TIME, InitTimers(&ctrl));
  IFSET(ctrl.dbglvl, DBG_TIME, MPI_Barrier(ctrl.gcomm));
  IFSET(ctrl.dbglvl, DBG_TIME, starttimer(ctrl.TotalTmr));

  CreateFusedElementGraph(&ctrl, graph, &wspace, numflag);

  idxcopy(nvtxs, graph->where, part);

  IFSET(ctrl.dbglvl, DBG_TIME, MPI_Barrier(ctrl.gcomm));
  IFSET(ctrl.dbglvl, DBG_TIME, stoptimer(ctrl.TotalTmr));

  if (((*wgtflag)&2) == 0)
    IMfree((void**)&graph->vwgt, LTERM);
  IMfree((void**)&graph->lperm, &graph->peind, &graph->pexadj, &graph->peadjncy,
         &graph->peadjloc, &graph->recvptr, &graph->recvind, &graph->sendptr,
         &graph->imap, &graph->sendind, &graph, LTERM);
  FreeWSpace(&wspace);
  FreeCtrl(&ctrl);
}

开发者ID:mrklein，项目名称:ParMGridGen，代码行数:48，代码来源:fused.c

示例13: SetOnClock

void CIA6526::DoInit() {

  // initialize base class
  Chip::DoInit();

  // set function to call at each clock
  SetOnClock((pfn)OnClock);
  SetBusy();

  // initialize components
  Reset.Init("Reset", this);
  Reset.SetOnHigh((pfn)OnReset);
  Reset.SetOnLow((pfn)OnReset);
  InitPorts();
  InitTimers();
  InitTOD();
  InitSDR();
  InitControl();

  // reset components
  OnReset();
};

开发者ID:TeeKay4711，项目名称:jsidplay2，代码行数:22，代码来源:CIA6526.cpp

示例14: InitHardware

//=========================================================================
//----- (00000C48) --------------------------------------------------------
__myevic__ void InitHardware()
{
	SYS_UnlockReg();

	//  32.768kHz external crystal
	if ( dfStatus.x32off )
	{
		CLK_DisableXtalRC( CLK_PWRCTL_LXTEN_Msk );
	}
	else
	{
		SYS->GPF_MFPL &= ~(SYS_GPF_MFPL_PF0MFP_Msk|SYS_GPF_MFPL_PF1MFP_Msk);
		SYS->GPF_MFPL |=  (SYS_GPF_MFPL_PF0MFP_X32_OUT|SYS_GPF_MFPL_PF1MFP_X32_IN);

		CLK_EnableXtalRC( CLK_PWRCTL_LXTEN_Msk );
		CLK_WaitClockReady( CLK_STATUS_LXTSTB_Msk );
	}

	SetPWMClock();

	SYS_LockReg();

	#if (ENABLE_UART)
	InitUART0();
	#endif

	InitGPIO();

	if ( !PD3 )
	{
		gFlags.noclock = 1;
	}

	InitSPI0();
	InitEADC();
	InitPWM();
	InitTimers();
	InitUSB();
}

开发者ID:ClockSelect，项目名称:myevic，代码行数:41，代码来源:main.c

示例15: main

/*********************************************************************
*	Function:	main
*********************************************************************/
void main(void) {
	
	u32 ResponseCount;
	void *pExitCriticalArg;
	u32 i; //loop variable

	
	// initialize the EZ-Kit
	ezInit(1);

	// initialize the flag manager because the LEDs and buttons connect via flags
	// Since callbacks are not being used memory does not to be given to the service
	ezErrorCheck(adi_flag_Init(NULL, 0, &ResponseCount, NULL));
	
 	//***CODE SNIPPED****//		
	
	InitTimers();
	
	while (1) {
 	//***CODE SNIPPED****//
		}			
		
	} // END WHILE

开发者ID:1900zyh，项目名称:leetcode，代码行数:26，代码来源:code.c

示例16: METIS_PartGraphKway

int METIS_PartGraphKway(idx_t *nvtxs, idx_t *ncon, idx_t *xadj, idx_t *adjncy, 
          idx_t *vwgt, idx_t *vsize, idx_t *adjwgt, idx_t *nparts, 
          real_t *tpwgts, real_t *ubvec, idx_t *options, idx_t *objval, 
          idx_t *part)
{
  int sigrval=0, renumber=0;
  graph_t *graph;
  ctrl_t *ctrl;

  /* set up malloc cleaning code and signal catchers */
  if (!gk_malloc_init()) 
    return METIS_ERROR_MEMORY;

  gk_sigtrap();

  if ((sigrval = gk_sigcatch()) != 0)
    goto SIGTHROW;


  /* set up the run parameters */
  ctrl = SetupCtrl(METIS_OP_KMETIS, options, *ncon, *nparts, tpwgts, ubvec);
  if (!ctrl) {
    gk_siguntrap();
    return METIS_ERROR_INPUT;
  }

  /* if required, change the numbering to 0 */
  if (ctrl->numflag == 1) {
    Change2CNumbering(*nvtxs, xadj, adjncy);
    renumber = 1;
  }

  /* set up the graph */
  graph = SetupGraph(ctrl, *nvtxs, *ncon, xadj, adjncy, vwgt, vsize, adjwgt);

  /* set up multipliers for making balance computations easier */
  SetupKWayBalMultipliers(ctrl, graph);

  /* set various run parameters that depend on the graph */
  if (ctrl->iptype == METIS_IPTYPE_METISRB) {
    ctrl->CoarsenTo = gk_max((*nvtxs)/(40*gk_log2(*nparts)), 30*(*nparts));
    ctrl->CoarsenTo = 10*(*nparts);
    ctrl->nIparts   = (ctrl->CoarsenTo == 30*(*nparts) ? 4 : 5);
  }
  else {
    ctrl->CoarsenTo = 10*(*nparts);
    ctrl->nIparts   = 10;
  }

  /* take care contiguity requests for disconnected graphs */
  if (ctrl->contig && !IsConnected(graph, 0)) 
    gk_errexit(SIGERR, "METIS Error: A contiguous partition is requested for a non-contiguous input graph.\n");
    
  /* allocate workspace memory */  
  AllocateWorkSpace(ctrl, graph);

  /* start the partitioning */
  IFSET(ctrl->dbglvl, METIS_DBG_TIME, InitTimers(ctrl));
  IFSET(ctrl->dbglvl, METIS_DBG_TIME, gk_startwctimer(ctrl->TotalTmr));

  *objval = MlevelKWayPartitioning(ctrl, graph, part);

  IFSET(ctrl->dbglvl, METIS_DBG_TIME, gk_stopwctimer(ctrl->TotalTmr));
  IFSET(ctrl->dbglvl, METIS_DBG_TIME, PrintTimers(ctrl));

  /* clean up */
  FreeCtrl(&ctrl);

SIGTHROW:
  /* if required, change the numbering back to 1 */
  if (renumber)
    Change2FNumbering(*nvtxs, xadj, adjncy, part);

  gk_siguntrap();
  gk_malloc_cleanup(0);

  return metis_rcode(sigrval);
}

开发者ID:GeospatialDaryl，项目名称:Metis_from_KarypisLab，代码行数:78，代码来源:kmetis.c

示例17: METIS_NodeND

int METIS_NodeND(idx_t *nvtxs, idx_t *xadj, idx_t *adjncy, idx_t *vwgt,
          idx_t *options, idx_t *perm, idx_t *iperm) 
{
  int sigrval=0, renumber=0;
  idx_t i, ii, j, l, nnvtxs=0;
  graph_t *graph=NULL;
  ctrl_t *ctrl;
  idx_t *cptr, *cind, *piperm;
  int numflag = 0;

  /* set up malloc cleaning code and signal catchers */
  if (!gk_malloc_init()) 
    return METIS_ERROR_MEMORY;

  gk_sigtrap();

  if ((sigrval = gk_sigcatch()) != 0) 
    goto SIGTHROW;


  /* set up the run time parameters */
  ctrl = SetupCtrl(METIS_OP_OMETIS, options, 1, 3, NULL, NULL);
  if (!ctrl) {
    gk_siguntrap();
    return METIS_ERROR_INPUT;
  }

  /* if required, change the numbering to 0 */
  if (ctrl->numflag == 1) {
    Change2CNumbering(*nvtxs, xadj, adjncy);
    renumber = 1;
  }

  IFSET(ctrl->dbglvl, METIS_DBG_TIME, InitTimers(ctrl));
  IFSET(ctrl->dbglvl, METIS_DBG_TIME, gk_startcputimer(ctrl->TotalTmr));

  /* prune the dense columns */
  if (ctrl->pfactor > 0.0) { 
    piperm = imalloc(*nvtxs, "OMETIS: piperm");

    graph = PruneGraph(ctrl, *nvtxs, xadj, adjncy, vwgt, piperm, ctrl->pfactor);
    if (graph == NULL) {
      /* if there was no prunning, cleanup the pfactor */
      gk_free((void **)&piperm, LTERM);
      ctrl->pfactor = 0.0;
    }
    else {
      nnvtxs = graph->nvtxs;
      ctrl->compress = 0;  /* disable compression if prunning took place */
    }
  }

  /* compress the graph; note that compression only happens if not prunning 
     has taken place. */
  if (ctrl->compress) { 
    cptr = imalloc(*nvtxs+1, "OMETIS: cptr");
    cind = imalloc(*nvtxs, "OMETIS: cind");

    graph = CompressGraph(ctrl, *nvtxs, xadj, adjncy, vwgt, cptr, cind);
    if (graph == NULL) {
      /* if there was no compression, cleanup the compress flag */
      gk_free((void **)&cptr, &cind, LTERM);
      ctrl->compress = 0; 
    }
    else {
      nnvtxs = graph->nvtxs;
      ctrl->cfactor = 1.0*(*nvtxs)/nnvtxs;
      if (ctrl->cfactor > 1.5 && ctrl->nseps == 1)
        ctrl->nseps = 2;
      //ctrl->nseps = (idx_t)(ctrl->cfactor*ctrl->nseps);
    }
  }

  /* if no prunning and no compression, setup the graph in the normal way. */
  if (ctrl->pfactor == 0.0 && ctrl->compress == 0) 
    graph = SetupGraph(ctrl, *nvtxs, 1, xadj, adjncy, vwgt, NULL, NULL);

  ASSERT(CheckGraph(graph, ctrl->numflag, 1));

  /* allocate workspace memory */
  AllocateWorkSpace(ctrl, graph);

  /* do the nested dissection ordering  */
  if (ctrl->ccorder) 
    MlevelNestedDissectionCC(ctrl, graph, iperm, graph->nvtxs);
  else
    MlevelNestedDissection(ctrl, graph, iperm, graph->nvtxs);


  if (ctrl->pfactor > 0.0) { /* Order any prunned vertices */
    icopy(nnvtxs, iperm, perm);  /* Use perm as an auxiliary array */
    for (i=0; i<nnvtxs; i++)
      iperm[piperm[i]] = perm[i];
    for (i=nnvtxs; i<*nvtxs; i++)
      iperm[piperm[i]] = i;

    gk_free((void **)&piperm, LTERM);
  }
  else if (ctrl->compress) { /* Uncompress the ordering */
    /* construct perm from iperm */
//.........这里部分代码省略.........

开发者ID:arbenson，项目名称:Clique，代码行数:101，代码来源:ometis.c

示例18: main

//-------------------------------------------------------------------
//----------------------------Code-----------------------------------
//-------------------------------------------------------------------
void main(void)
{
	// should only execute main loop once; after this just respond to interrupts
	InitTimers();	
	InitPorts();
	InitComm();
	InitInterrupts();
	SSPBUF = BytesOut[i];
	
	while(1)
	{		
		//-----------------------------------------------------------------------------------------		
		//-----------------------------------------------------------------------------------------
		//-----EUART STUFF-------------------------------------------------------------------------
		//-----------------------------------------------------------------------------------------
		//-----------------------------------------------------------------------------------------
	if(CommActive)
	{

		if( X_Transition!=0 )
		{
			X_Transition = 0;

			switch( CurrentX_State )
			{
				case X_Idle_State :
				{
						SEND = 1;
						NextX_State = X_StartDelim_State;
						NextByteOut = 0x7E;	
						//	Starting Edit for Variable Message Size		
						MessageCounter = Encode_Message(CurrentType);	
						X_LengthLSB = MessageCounter + 5; //For framing bytes
						//  Populating the Message Frame
						X_CMD = TXData[0];
						X_RF1 = TXData[1];
						X_RF2 = TXData[2];
						X_RF3 = TXData[3];
					    X_RF4 = TXData[4];
						X_RF5 = TXData[5];
					
				}
				break;

				case X_StartDelim_State :
				{

					NextX_State = X_LengthMSB_State;
					NextByteOut = X_LengthMSB ; 
				}
				break;

				case X_LengthMSB_State :
				{
					NextX_State = X_LengthLSB_State;
					NextByteOut = X_LengthLSB; 
				}
				break;
	
				case X_LengthLSB_State :
				{
					NextX_State = X_API_State;
					NextByteOut = X_API; 
				}
				break;
	
				case X_API_State :
				{
					NextX_State = X_FID_State;
					NextByteOut = X_FID; 
				}
				break;
		
				case X_FID_State :
				{
					NextX_State = X_AddrMSB_State;
					NextByteOut = X_AddrMSB; 
				}
				break;

				case X_AddrMSB_State :
				{
					NextX_State = X_AddrLSB_State;
					NextByteOut = X_AddrLSB; 
				}
				break;
	
				case X_AddrLSB_State :
				{
					NextX_State = X_Options_State;
					NextByteOut = X_Options; 
				}
				break;

				case X_Options_State :
				{
					NextX_State = X_CMD_State; // will later need logic here for what transition to do based on length LSB
//.........这里部分代码省略.........

开发者ID:humbleSeraph，项目名称:Messi-tron-Code，代码行数:101，代码来源:CoachMasterCode.c

示例19: ParMETIS_V3_NodeND

/***********************************************************************************
* This function is the entry point of the parallel ordering algorithm.
* This function assumes that the graph is already nice partitioned among the 
* processors and then proceeds to perform recursive bisection.
************************************************************************************/
void ParMETIS_V3_NodeND(idxtype *vtxdist, idxtype *xadj, idxtype *adjncy, int *numflag,
              int *options, idxtype *order, idxtype *sizes, MPI_Comm *comm)
{
  int i, j;
  int ltvwgts[MAXNCON];
  int nparts, npes, mype, wgtflag = 0, seed = GLOBAL_SEED;
  CtrlType ctrl;
  WorkSpaceType wspace;
  GraphType *graph, *mgraph;
  idxtype *morder;
  int minnvtxs;

  MPI_Comm_size(*comm, &npes);
  MPI_Comm_rank(*comm, &mype);
  nparts = npes;

  if (!ispow2(npes)) {
    if (mype == 0)
      printf("Error: The number of processors must be a power of 2!\n");
    return;
  }

  if (vtxdist[npes] < (int)((float)(npes*npes)*1.2)) {
    if (mype == 0)
      printf("Error: Too many processors for this many vertices.\n");
    return;
  }

  minnvtxs = vtxdist[1]-vtxdist[0];
  for (i=0; i<npes; i++)
    minnvtxs = (minnvtxs < vtxdist[i+1]-vtxdist[i]) ? minnvtxs : vtxdist[i+1]-vtxdist[i];

  if (minnvtxs < (int)((float)npes*1.1)) {
    if (mype == 0)
      printf("Error: vertices are not distributed equally.\n");
    return;
  }
 

  if (*numflag == 1) 
    ChangeNumbering(vtxdist, xadj, adjncy, order, npes, mype, 1);

  SetUpCtrl(&ctrl, nparts, options[PMV3_OPTION_DBGLVL], *comm);
  ctrl.CoarsenTo = amin(vtxdist[npes]+1, 25*npes);

  ctrl.CoarsenTo = amin(vtxdist[npes]+1, 25*amax(npes, nparts));
  ctrl.seed = mype;
  ctrl.sync = seed;
  ctrl.partType = STATIC_PARTITION;
  ctrl.ps_relation = -1;
  ctrl.tpwgts = fsmalloc(nparts, 1.0/(float)(nparts), "tpwgts");
  ctrl.ubvec[0] = 1.03;

  graph = Moc_SetUpGraph(&ctrl, 1, vtxdist, xadj, NULL, adjncy, NULL, &wgtflag);

  PreAllocateMemory(&ctrl, graph, &wspace);

  /*=======================================================
   * Compute the initial k-way partitioning 
   =======================================================*/
  IFSET(ctrl.dbglvl, DBG_TIME, InitTimers(&ctrl));
  IFSET(ctrl.dbglvl, DBG_TIME, MPI_Barrier(ctrl.gcomm));
  IFSET(ctrl.dbglvl, DBG_TIME, starttimer(ctrl.TotalTmr));

  Moc_Global_Partition(&ctrl, graph, &wspace);

  IFSET(ctrl.dbglvl, DBG_TIME, MPI_Barrier(ctrl.gcomm));
  IFSET(ctrl.dbglvl, DBG_TIME, stoptimer(ctrl.TotalTmr));
  IFSET(ctrl.dbglvl, DBG_TIME, PrintTimingInfo(&ctrl));

  /*=======================================================
   * Move the graph according to the partitioning
   =======================================================*/
  IFSET(ctrl.dbglvl, DBG_TIME, MPI_Barrier(ctrl.gcomm));
  IFSET(ctrl.dbglvl, DBG_TIME, starttimer(ctrl.MoveTmr));

  MALLOC_CHECK(NULL);
  graph->ncon = 1;
  mgraph = Moc_MoveGraph(&ctrl, graph, &wspace);
  MALLOC_CHECK(NULL);

  IFSET(ctrl.dbglvl, DBG_TIME, MPI_Barrier(ctrl.gcomm));
  IFSET(ctrl.dbglvl, DBG_TIME, stoptimer(ctrl.MoveTmr));

  /*=======================================================
   * Now compute an ordering of the moved graph
   =======================================================*/
  IFSET(ctrl.dbglvl, DBG_TIME, MPI_Barrier(ctrl.gcomm));
  IFSET(ctrl.dbglvl, DBG_TIME, starttimer(ctrl.TotalTmr));

  FreeWSpace(&wspace);
  PreAllocateMemory(&ctrl, mgraph, &wspace);

  ctrl.ipart = ISEP_NODE;
  ctrl.CoarsenTo = amin(vtxdist[npes]+1, amax(20*npes, 1000));
//.........这里部分代码省略.........

开发者ID:KnoooW，项目名称:gpgpu-sim，代码行数:101，代码来源:ometis.c

示例20: main

int main(void)
{
    //STATIC_ASSERT(sizeof(uint16_t) == 2);
    InitGPIO();
    InitSPI_soft();
    InitI2C_soft();
    InitADC();
    InitSystemTimer();
    InitTimers();
    InitMessages();
    InitCC2500(preferredSettings); //(const uint8_t **)conf(+6bytes of code), preferredSettings
    uart0_init( UART_BAUD_SELECT(RS485_BAUDRATE, F_CPU) );
    //_delay_ms(5000);
    //InitEXTI();
    //MCUCR |= (_BV(ISC11) | _BV(ISC01));

    /*check Watchdog reset flag*/
    if(bit_is_set(MCUCSR, WDRF)) {
      //increase wathcdog reset counter and save in eeprom
    }

    set_sleep_mode(SLEEP_MODE_IDLE); //варианты SLEEP_MODE_PWR_SAVE SLEEP_MODE_IDLE SLEEP_MODE_ADC
    //wdt_enable(WDTO_2S);
    sei(); //enable interrupts

    for (uint8_t i = 0; i<0x05; i++) {
          //_spi_start();
          //spi_TxRx(0x9D);
          //_spi_stop();
          _delay_ms(100);
          PORTC |= _BV(PC2); //blink for test
          _delay_ms(100);
          PORTC &= ~_BV(PC2);
          _delay_ms(100);

          RS485_DE_HIGH;
          uart0_putc(0xba);
          _delay_ms(2);
          RS485_DE_LOW;
        }
        RS485_DE_LOW;

    while(1) {
      cc_table_state[CC_state]();


      ProcessTimers(&sys_timer);
      ProcessMessages();
      wdt_reset();

      /*enter in sleep mode until interrupts occured*/
//      cli(); //disable interrupts
//      if (some_condition)
//      {
//        sleep_enable();
//        sei();
//        sleep_cpu();
//        sleep_disable();
//      }
//      sei();
    }

    return 0;
}

开发者ID:hylics，项目名称:IRFS105，代码行数:64，代码来源:main.c

注：本文中的InitTimers函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ InitTooltipManager函数代码示例发布时间：2022-05-30

C++ InitTimer函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18253|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9671|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8455|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7859|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ InitTimers函数代码示例

示例1: main

示例2: ParMETIS_V3_PartGeom

示例3: METIS_WPartGraphRecursive

示例4: METIS_EdgeND

示例5: MCUInit

示例6: InitBoard

示例7: METIS_mCPartGraphKway

示例8: main

示例9: main

示例10: METIS_WPartGraphKway2

示例11: ClassicLadder_InitAllDatas

示例12: ParMETIS_FusedElementGraph

示例13: SetOnClock

示例14: InitHardware

示例15: main

示例16: METIS_PartGraphKway

示例17: METIS_NodeND

示例18: main

示例19: ParMETIS_V3_NodeND

示例20: main

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

goldfire/howler.js: Javascript audio lib

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053