C++ IntUnregister函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中IntUnregister函数的典型用法代码示例。如果您正苦于以下问题：C++ IntUnregister函数的具体用法？C++ IntUnregister怎么用？C++ IntUnregister使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了IntUnregister函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: SpiDevDeInit

/*******************************************************************************
** Name: SpiDevDeInit
** Input:HDC dev
** Return: rk_err_t
** Owner:Aaron.sun
** Date: 2014.5.30
** Time: 9:18:00
*******************************************************************************/
_DRIVER_SPI_SPIDEVICE_INIT_
INIT FUN rk_err_t SpiDevDeInit(SPI_DEVICE_CLASS * pstSpiDev)
{
    if(((DEVICE_CLASS*)pstSpiDev)->DevID == 0)
    {
        IntDisable(INT_ID_SPI0);

        IntPendingClear(INT_ID_SPI0);

        IntUnregister(INT_ID_SPI0);

        ScuClockGateCtr(PCLK_SPI0_GATE,0);
    }
    else
    {
        IntDisable(INT_ID_SPI1);

        IntPendingClear(INT_ID_SPI1);

        IntUnregister(INT_ID_SPI1);

        ScuClockGateCtr(PCLK_SPI1_GATE,0);
    }

    return RK_SUCCESS;
}

开发者ID:wjw890912，项目名称:RK_NanoD_WIFI_demo，代码行数:34，代码来源:SpiDevice.c

示例2: QEIIntUnregister

//*****************************************************************************
//
//! Unregisters an interrupt handler for the quadrature encoder interrupt.
//!
//! \param ulBase is the base address of the quadrature encoder module.
//!
//! This function will clear the handler to be called when a quadrature encoder
//! interrupt occurs.  This will also mask off the interrupt in the interrupt
//! controller so that the interrupt handler no longer is called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
QEIIntUnregister(unsigned long ulBase)
{
    unsigned long ulInt;

    //
    // Check the arguments.
    //
    ASSERT((ulBase == QEI0_BASE) || (ulBase == QEI1_BASE));

    //
    // Determine the interrupt number based on the QEI module.
    //
    ulInt = (ulBase == QEI0_BASE) ? INT_QEI0 : INT_QEI1;

    //
    // Disable the interrupt.
    //
    IntDisable(ulInt);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(ulInt);
}

开发者ID:postgetme，项目名称:crco，代码行数:41，代码来源:qei.c

示例3: GPIOPortIntUnregister

void
GPIOPortIntUnregister(unsigned long ulPort)
{
    //
    // Check the arguments.
    //
    ASSERT((ulPort == GPIO_PORTA_BASE) || (ulPort == GPIO_PORTB_BASE) ||
           (ulPort == GPIO_PORTC_BASE) || (ulPort == GPIO_PORTD_BASE) ||
           (ulPort == GPIO_PORTE_BASE));

    //
    // Get the interrupt number associated with the specified GPIO.
    //
    ulPort = GPIOGetIntNumber(ulPort);

    //
    // Disable the GPIO interrupt.
    //
    IntDisable(ulPort);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(ulPort);
}

开发者ID:AldenHiggins，项目名称:ELEC424-Lab06-Scheduling-with-FreeRTOS，代码行数:25，代码来源:gpio.c

示例4: QEIIntUnregister

//*****************************************************************************
//
//! Unregisters an interrupt handler for the quadrature encoder interrupt.
//!
//! \param ui32Base is the base address of the quadrature encoder module.
//!
//! This function unregisters the handler to be called when a quadrature
//! encoder interrupt occurs.  This function also masks off the interrupt in
//! the interrupt controller so that the interrupt handler no longer is called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
QEIIntUnregister(uint32_t ui32Base)
{
    uint32_t ui32Int;

    //
    // Check the arguments.
    //
    ASSERT((ui32Base == QEI0_BASE) || (ui32Base == QEI1_BASE));

    //
    // Determine the interrupt number based on the QEI module.
    //
    ui32Int = _QEIIntNumberGet(ui32Base);

    ASSERT(ui32Int != 0);

    //
    // Disable the interrupt.
    //
    IntDisable(ui32Int);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(ui32Int);
}

开发者ID:Gvaleur，项目名称:coide_support，代码行数:43，代码来源:qei.c

示例5: NwpRegisterInterruptHandler

int NwpRegisterInterruptHandler(P_EVENT_HANDLER InterruptHdl , void* pValue)    //do not know what to do with pValue
{

    if(InterruptHdl == NULL)
    {
        //De-register Interprocessor communication interrupt between App and NWP
        #ifdef SL_PLATFORM_MULTI_THREADED
          osi_InterruptDeRegister(INT_NWPIC);
        #else
        IntDisable(INT_NWPIC);
        IntUnregister(INT_NWPIC);
        IntPendClear(INT_NWPIC);
        #endif
        g_pHostIntHdl = NULL;
    }
    else
    {
          g_pHostIntHdl = InterruptHdl;
#if 0
          //Setting the 14th and 13th bit to '01' to make the HOST_IRQ edge triggered
          HWREG(0x4402E168) |= 0x2000;
#endif
          #ifdef SL_PLATFORM_MULTI_THREADED
          	 IntPendClear(INT_NWPIC);
             osi_InterruptRegister(INT_NWPIC, (P_OSI_INTR_ENTRY)HostIntHanlder,INT_PRIORITY_LVL_1);
          #else
              IntRegister(INT_NWPIC, HostIntHanlder);
              IntPrioritySet(INT_NWPIC, INT_PRIORITY_LVL_1);
              IntPendClear(INT_NWPIC);
              IntEnable(INT_NWPIC);
          #endif
    }

  return 0;
}

开发者ID:ebirger，项目名称:tinkerpal_bsps，代码行数:35，代码来源:cc_pal.c

示例6: SSIIntUnregister

//*****************************************************************************
//
//! Unregisters an interrupt handler for the synchronous serial interface.
//!
//! \param ulBase specifies the SSI module base address.
//!
//! This function clears the handler to be called when an SSI interrupt
//! occurs.  This function also masks off the interrupt in the interrupt
//! controller so that the interrupt handler no longer is called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
SSIIntUnregister(unsigned long ulBase)
{
    unsigned long ulInt;

    //
    // Check the arguments.
    //
    ASSERT(SSIBaseValid(ulBase));

    //
    // Determine the interrupt number based on the SSI port.
    //
    ulInt = SSIIntNumberGet(ulBase);

    //
    // Disable the interrupt.
    //
    IntDisable(ulInt);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(ulInt);
}

开发者ID:tbraunP，项目名称:StellarisDriverLib，代码行数:41，代码来源:ssi.c

示例7: SSIIntUnregister

//*****************************************************************************
//
//! Unregisters an interrupt handler for the synchronous serial interface.
//!
//! \param ui32Base specifies the SSI module base address.
//!
//! This function clears the handler to be called when an SSI interrupt
//! occurs.  This function also masks off the interrupt in the interrupt
//! controller so that the interrupt handler no longer is called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
SSIIntUnregister(uint32_t ui32Base)
{
    uint32_t ui32Int;

    //
    // Check the arguments.
    //
    ASSERT(_SSIBaseValid(ui32Base));

    //
    // Determine the interrupt number based on the SSI port.
    //
    ui32Int = _SSIIntNumberGet(ui32Base);

    ASSERT(ui32Int != 0);

    //
    // Disable the interrupt.
    //
    IntDisable(ui32Int);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(ui32Int);
}

开发者ID:Lboyve，项目名称:TM4C129X-EPI-uDMA，代码行数:43，代码来源:ssi.c

示例8: UARTIntUnregister

//*****************************************************************************
//
//! Unregisters an interrupt handler for a UART interrupt
//!
//! \param ui32Base is the base address of the UART port.
//!
//! This function does the actual unregistering of the interrupt handler.  It
//! clears the handler to be called when a UART interrupt occurs.  This
//! function also masks off the interrupt in the interrupt controller so that
//! the interrupt handler no longer is called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None
//
//*****************************************************************************
void
UARTIntUnregister(uint32_t ui32Base)
{
    uint32_t ui32Int;

    //
    // Check the arguments.
    //
    ASSERT(UARTBaseValid(ui32Base));

    //
    // Determine the interrupt number based on the UART port.
    //
    ui32Int = ((ui32Base == UART0_BASE) ? INT_UART0 : INT_UART1);

    //
    // Disable the interrupt.
    //
    IntDisable(ui32Int);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(ui32Int);
}

开发者ID:chessami92，项目名称:ceen4360-cc2538-code，代码行数:42，代码来源:uart.c

示例9: UARTIntUnregister

void
UARTIntUnregister(unsigned long ulBase)
{
    unsigned long ulInt;

    //
    // Check the arguments.
    //
    ASSERT((ulBase == UART0_BASE) || (ulBase == UART1_BASE));

    //
    // Determine the interrupt number based on the UART port.
    //
    ulInt = (ulBase == UART0_BASE) ? INT_UART0 : INT_UART1;

    //
    // Disable the interrupt.
    //
    IntDisable(ulInt);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(ulInt);
}

开发者ID:AldenHiggins，项目名称:ELEC424-Lab06-Scheduling-with-FreeRTOS，代码行数:25，代码来源:uart.c

示例10: SSIIntUnregister

//*****************************************************************************
//
//! Unregisters an interrupt handler for the synchronous serial port
//!
//! \param ui32Base specifies the SSI module base address.
//!
//! This function will clear the handler to be called when a SSI
//! interrupt occurs. This will also mask off the interrupt in the interrupt
//! controller so that the interrupt handler no longer is called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None
//
//*****************************************************************************
void
SSIIntUnregister(uint32_t ui32Base)
{
    uint32_t ui32Int;

    //
    // Check the arguments.
    //
    ASSERT(SSIBaseValid(ui32Base));

    //
    // Determine the interrupt number based on the SSI port.
    //
    ui32Int = (ui32Base == SSI0_BASE) ? INT_SSI0 : INT_SSI1;

    //
    // Disable the interrupt.
    //
    IntDisable(ui32Int);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(ui32Int);
}

开发者ID:adamdunkels，项目名称:cc26xxware，代码行数:41，代码来源:ssi.c

示例11: I2CIntUnregister

//*****************************************************************************
//
//! Unregisters an interrupt handler for the I2C module.
//!
//! \param ulBase is the base address of the I2C Master module.
//!
//! This function will clear the handler to be called when an I2C interrupt
//! occurs.  This will also mask off the interrupt in the interrupt controller
//! so that the interrupt handler no longer is called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
I2CIntUnregister(unsigned long ulBase)
{
    unsigned long ulInt;

    //
    // Check the arguments.
    //
    ASSERT((ulBase == I2C0_MASTER_BASE) || (ulBase == I2C1_MASTER_BASE));

    //
    // Determine the interrupt number based on the I2C port.
    //
    ulInt = (ulBase == I2C0_MASTER_BASE) ? INT_I2C0 : INT_I2C1;

    //
    // Disable the interrupt.
    //
    IntDisable(ulInt);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(ulInt);
}

开发者ID:Bob4ik888，项目名称:WebRadio，代码行数:41，代码来源:i2c.c

示例12: SdcDevDeInit

/*******************************************************************************
** Name: SdcDevDeInit
** Input:HDC dev
** Return: rk_err_t
** Owner:Aaron.sun
** Date: 2014.2.19
** Time: 15:59:49
*******************************************************************************/
_DRIVER_SDMMC_SDMMCDEVICE_INIT_
rk_err_t SdcDevDeInit(SDC_DEVICE_CLASS * pstSdcDev)
{
    if (pstSdcDev->enSdMmcPort == SDC0)
    {
        IntDisable(INT_ID_EMMC);
        IntPendingClear(INT_ID_EMMC);
        IntUnregister(INT_ID_EMMC);
    }
    else if (pstSdcDev->enSdMmcPort == SDC1)
    {
        IntDisable(INT_ID_SDMMC);
        IntPendingClear(INT_ID_SDMMC);
        IntUnregister(INT_ID_SDMMC);
    }
    //ScuClockGateCtr(CLOCK_GATE_SDMMC,0);
    return RK_SUCCESS;
}

开发者ID:wjw890912，项目名称:RK_NanoD_WIFI_demo，代码行数:26，代码来源:SdMmcDevice.c

示例13: CameraIntUnregister

//******************************************************************************
//
//! Un-Register camera interrupt handler
//!
//! \param ulBase is the base address of the camera module.
//!
//! This function unregisters and disables global camera interrupt from the
//! interrupt controller.
//!
//! \return None.
//
//******************************************************************************
void CameraIntUnregister(unsigned long ulBase)
{
    //
    // Disable the interrupt.
    //
    IntDisable(INT_CAMERA);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(INT_CAMERA);
}

开发者ID:ApparentlyConnected，项目名称:Energia-Storm-Ninja-Dist，代码行数:24，代码来源:camera.c

示例14: uDMAIntUnregister

//*****************************************************************************
//
//! Unregisters an interrupt handler for the uDMA controller.
//!
//! \param ulIntChannel identifies which uDMA interrupt to unregister.
//!
//! This function will disable and clear the handler to be called for the
//! specified uDMA interrupt.  The \e ulIntChannel parameter should be one of
//! \b UDMA_INT_SW or \b UDMA_INT_ERR as documented for the function
//! uDMAIntRegister().
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
uDMAIntUnregister(unsigned long ulIntChannel)
{
    //
    // Disable the interrupt.
    //
    IntDisable(ulIntChannel);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(ulIntChannel);
}

开发者ID:karsten2，项目名称:Projektarbeit，代码行数:30，代码来源:udma.c

示例15: I2CIntUnregister

//*****************************************************************************
//
//! Unregisters an interrupt handler for the I2C module
//!
//! This function clears the handler to be called when an I2C interrupt
//! occurs.  The function also masks off the interrupt in the interrupt
//! controller so that the interrupt handler no longer is called.
//!
//! \sa See IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None
//
//*****************************************************************************
void
I2CIntUnregister(void)
{
    //
    // Disable the interrupt.
    //
    IntDisable(INT_I2C0);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(INT_I2C0);
}

开发者ID:barriquello，项目名称:iotstack，代码行数:27，代码来源:i2c.c

示例16: SysTickIntUnregister

//*****************************************************************************
//
//! Unregisters the interrupt handler for the SysTick interrupt.
//!
//! This function will clear the handler to be called when a SysTick interrupt
//! occurs.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
SysTickIntUnregister(void)
{
    //
    // Disable the SysTick interrupt.
    //
    HWREG(NVIC_ST_CTRL) &= ~(NVIC_ST_CTRL_INTEN);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(FAULT_SYSTICK);
}

开发者ID:gouravmodi1991，项目名称:6154_Embedded_Operating_System，代码行数:26，代码来源:systick.c

示例17: HibernateIntUnregister

//*****************************************************************************
//
//! Unregisters an interrupt handler for the Hibernation module interrupt.
//!
//! Unregisters the interrupt handler in the system interrupt controller.  The
//! interrupt is disabled at the global level, and the interrupt handler will
//! no longer be called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
HibernateIntUnregister(void)
{
    //
    // Disable the hibernate interrupt.
    //
    IntDisable(INT_HIBERNATE);

    //
    // Unregister the interrupt handler.
    //
    IntUnregister(INT_HIBERNATE);
}

开发者ID:achapp，项目名称:Rasware2009，代码行数:27，代码来源:hibernate.c

示例18: SysExcIntUnregister

//*****************************************************************************
//
//! Unregisters the system exception interrupt handler.
//!
//! This function removes the system exception interrupt handler from the
//! vector table in SRAM.  This function also masks off the system exception 
//! interrupt in the interrupt controller so that the interrupt handler is no 
//! longer called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
SysExcIntUnregister(void)
{
    //
    // Disable the system exception interrupt.
    //
    IntDisable(INT_SYSEXC);

    //
    // Unregister the system exception interrupt handler.
    //
    IntUnregister(INT_SYSEXC);
}

开发者ID:304471720，项目名称:rt-thread，代码行数:28，代码来源:sysexc.c

示例19: SDHostIntUnregister

//*****************************************************************************
//
//! Unregisters the interrupt handler for SDHost interrupt
//!
//! \param ulBase is the base address of SDHost module
//!
//! This function does the actual unregistering of the interrupt handler.  It
//! clears the handler to be called when a SDHost interrupt occurs.  This
//! function also masks off the interrupt in the interrupt controller so that
//! the interrupt handler no longer is called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \return None.
//
//*****************************************************************************
void
SDHostIntUnregister(unsigned long ulBase)
{
  //
  // Disable the SDHost interrupt.
  //
  IntDisable(INT_MMCHS);

  //
  // Unregister the interrupt handler.
  //
  IntUnregister(INT_MMCHS);
}

开发者ID:ebirger，项目名称:tinkerpal_bsps，代码行数:30，代码来源:sdhost.c

示例20: WatchdogIntUnregister

//*****************************************************************************
//
//! Unregisters an interrupt handler for the watchdog timer interrupt.
//!
//! \param ui32Base is the base address of the watchdog timer module.
//!
//! This function does the actual unregistering of the interrupt handler.  This
//! function clears the handler to be called when a watchdog timer interrupt
//! occurs.  This function also masks off the interrupt in the interrupt
//! controller so that the interrupt handler no longer is called.
//!
//! \sa IntRegister() for important information about registering interrupt
//! handlers.
//!
//! \note For parts with a watchdog timer module that has the ability to
//! generate an NMI instead of a standard interrupt, this function unregisters
//! the standard watchdog interrupt handler.  To unregister the NMI watchdog
//! handler, use IntUnregister() to unregister the handler for the
//! \b FAULT_NMI interrupt.
//!
//! \return None.
//
//*****************************************************************************
void WatchdogIntUnregister(uint32_t ui32Base) {
	//
	// Check the arguments.
	//
	ASSERT((ui32Base == WATCHDOG0_BASE) || (ui32Base == WATCHDOG1_BASE));

	//
	// Disable the interrupt.
	//
	IntDisable(INT_WATCHDOG_TM4C123);

	//
	// Unregister the interrupt handler.
	//
	IntUnregister(INT_WATCHDOG_TM4C123);
}

开发者ID:AkBKukU，项目名称:TimingTesting，代码行数:39，代码来源:watchdog.c

注：本文中的IntUnregister函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ Int_val函数代码示例发布时间：2022-05-30

C++ IntType函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18248|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9671|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8455|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9384|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8426|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7859|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ IntUnregister函数代码示例

示例1: SpiDevDeInit

示例2: QEIIntUnregister

示例3: GPIOPortIntUnregister

示例4: QEIIntUnregister

示例5: NwpRegisterInterruptHandler

示例6: SSIIntUnregister

示例7: SSIIntUnregister

示例8: UARTIntUnregister

示例9: UARTIntUnregister

示例10: SSIIntUnregister

示例11: I2CIntUnregister

示例12: SdcDevDeInit

示例13: CameraIntUnregister

示例14: uDMAIntUnregister

示例15: I2CIntUnregister

示例16: SysTickIntUnregister

示例17: HibernateIntUnregister

示例18: SysExcIntUnregister

示例19: SDHostIntUnregister

示例20: WatchdogIntUnregister

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

CVE-2022-33742

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

zloirock/core-js: Standard Library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053