// user assinged bigger buffer that is enough to return WriteEventContext
NTSTATUS
DokanEventWrite(
    __in PDEVICE_OBJECT DeviceObject,
    __in PIRP Irp
	)
{
	KIRQL				oldIrql;
    PLIST_ENTRY			thisEntry, nextEntry, listHead;
	PIRP_ENTRY			irpEntry;
    PDokanVCB			vcb;
	PEVENT_INFORMATION	eventInfo;
	PIRP				writeIrp;

	eventInfo		= (PEVENT_INFORMATION)Irp->AssociatedIrp.SystemBuffer;
	ASSERT(eventInfo != NULL);
	
	DDbgPrint("==> DokanEventWrite [EventInfo #%X]\n", eventInfo->SerialNumber);

	vcb = DeviceObject->DeviceExtension;

	if (GetIdentifierType(vcb) != VCB) {
		return STATUS_INVALID_PARAMETER;
	}

	ASSERT(KeGetCurrentIrql() <= DISPATCH_LEVEL);
	KeAcquireSpinLock(&vcb->Dcb->PendingIrp.ListLock, &oldIrql);

	// search corresponding write IRP through pending IRP list
	listHead = &vcb->Dcb->PendingIrp.ListHead;

    for (thisEntry = listHead->Flink; thisEntry != listHead; thisEntry = nextEntry) {

		PIO_STACK_LOCATION writeIrpSp, eventIrpSp;
		PEVENT_CONTEXT	eventContext;
		ULONG			info = 0;
		NTSTATUS		status;

		nextEntry = thisEntry->Flink;
        irpEntry = CONTAINING_RECORD(thisEntry, IRP_ENTRY, ListEntry);

		// check whehter this is corresponding IRP

        //DDbgPrint("SerialNumber irpEntry %X eventInfo %X\n", irpEntry->SerialNumber, eventInfo->SerialNumber);

		if (irpEntry->SerialNumber != eventInfo->SerialNumber)  {
			continue;
		}

		// do NOT free irpEntry here
		writeIrp = irpEntry->Irp;
		if (writeIrp == NULL) {
			// this IRP has already been canceled
			ASSERT(irpEntry->CancelRoutineFreeMemory == FALSE);
			DokanFreeIrpEntry(irpEntry);
			continue;
		}

		if (IoSetCancelRoutine(writeIrp, DokanIrpCancelRoutine) == NULL) {
		//if (IoSetCancelRoutine(writeIrp, NULL) != NULL) {
			// Cancel routine will run as soon as we release the lock
			InitializeListHead(&irpEntry->ListEntry);
			irpEntry->CancelRoutineFreeMemory = TRUE;
			continue;
		}

		writeIrpSp = irpEntry->IrpSp;
		eventIrpSp = IoGetCurrentIrpStackLocation(Irp);
			
		ASSERT(writeIrpSp != NULL);
		ASSERT(eventIrpSp != NULL);

		eventContext = (PEVENT_CONTEXT)writeIrp->Tail.Overlay.DriverContext[DRIVER_CONTEXT_EVENT];
		ASSERT(eventContext != NULL);
				
		// short of buffer length
		if (eventIrpSp->Parameters.DeviceIoControl.OutputBufferLength
			< eventContext->Length) {		
			DDbgPrint("  EventWrite: STATUS_INSUFFICIENT_RESOURCE\n");
			status =  STATUS_INSUFFICIENT_RESOURCES;
		} else {
			PVOID buffer;
			//DDbgPrint("  EventWrite CopyMemory\n");
			//DDbgPrint("  EventLength %d, BufLength %d\n", eventContext->Length,
			//			eventIrpSp->Parameters.DeviceIoControl.OutputBufferLength);
			if (Irp->MdlAddress)
				buffer = MmGetSystemAddressForMdlSafe(Irp->MdlAddress, NormalPagePriority);
			else
				buffer = Irp->AssociatedIrp.SystemBuffer;
					
			ASSERT(buffer != NULL);
			RtlCopyMemory(buffer, eventContext, eventContext->Length);
						
			info = eventContext->Length;
			status = STATUS_SUCCESS;
		}

		DokanFreeEventContext(eventContext);
		writeIrp->Tail.Overlay.DriverContext[DRIVER_CONTEXT_EVENT] = 0;

//.........这里部分代码省略.........

NTSTATUS
DriverDeviceControl(
    IN PDEVICE_OBJECT DeviceObject,
    IN PIRP Irp
    )
{

    NTSTATUS           Status = STATUS_UNSUCCESSFUL;
    PIO_STACK_LOCATION IrpSp;
    ULONG              IOControlCode = 0;
    ULONG              dwBytesWritten = 0;
    PCHAR              pInBuf = NULL, pOutBuf = NULL;
    unsigned int       _cpu_thread_id = 0;
    unsigned int       new_cpu_thread_id = 0;
    ULONG              _num_active_cpus = 0;
    KAFFINITY          _kaffinity = 0;
    UINT32             core_id = 0;

    //
    // Get the current IRP stack location of this request
    //
    IrpSp = IoGetCurrentIrpStackLocation (Irp);
    IOControlCode = IrpSp->Parameters.DeviceIoControl.IoControlCode;

    DbgPrint( "[chipsec] >>>>>>>>>> IOCTL >>>>>>>>>>\n" );
    DbgPrint( "[chipsec] DeviceObject = 0x%x IOCTL = 0x%x\n", DeviceObject, IOControlCode );
    DbgPrint( "[chipsec] InputBufferLength = 0x%x, OutputBufferLength = 0x%x\n", IrpSp->Parameters.DeviceIoControl.InputBufferLength, IrpSp->Parameters.DeviceIoControl.OutputBufferLength );

    //
    // CPU thread ID
    // 
    _num_active_cpus = KeQueryActiveProcessorCount( NULL );
    _kaffinity       = KeQueryActiveProcessors();
    _cpu_thread_id   = KeGetCurrentProcessorNumber();
    DbgPrint( "[chipsec] Active CPU threads         : %d (KeNumberProcessors = %d)\n", _num_active_cpus, KeNumberProcessors );
    DbgPrint( "[chipsec] Active CPU mask (KAFFINITY): 0x%08X\n", _kaffinity );
    DbgPrint( "[chipsec] Current CPU thread         : %d\n", _cpu_thread_id );

    //
    // Switch on the IOCTL code that is being requested by the user.  If the
    // operation is a valid one for this device do the needful.
    //
    Irp -> IoStatus.Information = 0;
    switch( IOControlCode )
      {
        case READ_PCI_CFG_REGISTER:
          {
            DWORD val;
            BYTE size = 0;
            WORD bdf[4];
            BYTE bus = 0, dev = 0, fun = 0, off = 0;
            DbgPrint( "[chipsec] > READ_PCI_CFG_REGISTER\n" );

            RtlCopyBytes( bdf,Irp->AssociatedIrp.SystemBuffer, 4*sizeof(WORD) );
            RtlCopyBytes( &size, (BYTE*)Irp->AssociatedIrp.SystemBuffer + 4*sizeof(WORD), sizeof(BYTE) );
            bus = (UINT8)bdf[0];
            dev = (UINT8)bdf[1];
            fun = (UINT8)bdf[2];
            off = (UINT8)bdf[3];

            if( 1 != size && 2 != size && 4 != size)
              {
              DbgPrint( "[chipsec] ERROR: STATUS_INVALID_PARAMETER\n" );
              Status = STATUS_INVALID_PARAMETER;
              break;
              }
            val = ReadPCICfg( bus, dev, fun, off, size );             

            IrpSp->Parameters.Read.Length = size;
            RtlCopyBytes( Irp->AssociatedIrp.SystemBuffer, (VOID*)&val, size );
            DbgPrint( "[chipsec][READ_PCI_CFG_REGISTER] B/D/F: %#04x/%#04x/%#04x, OFFSET: %#04x, value = %#010x (size = 0x%x)\n", bus, dev, fun, off, val, size );

            dwBytesWritten = IrpSp->Parameters.Read.Length;
            Status = STATUS_SUCCESS;
            break;
          }
        case WRITE_PCI_CFG_REGISTER:
          {
            DWORD val = 0;
            WORD bdf[6];
            BYTE bus = 0, dev = 0, fun = 0, off = 0;
            BYTE size = 0;
            DbgPrint( "[chipsec] > WRITE_PCI_CFG_REGISTER\n" );

            RtlCopyBytes( bdf, Irp->AssociatedIrp.SystemBuffer, 6 * sizeof(WORD) );
            bus = (UINT8)bdf[0];
            dev = (UINT8)bdf[1];
            fun = (UINT8)bdf[2];
            off = (UINT8)bdf[3];
            RtlCopyBytes( &size, (BYTE*)Irp->AssociatedIrp.SystemBuffer + 6*sizeof(WORD), sizeof(BYTE) );

            val = ((DWORD)bdf[5] << 16) | bdf[4];
            DbgPrint( "[chipsec][WRITE_PCI_CFG_REGISTER] B/D/F: %#02x/%#02x/%#02x, OFFSET: %#02x, value = %#010x (size = %#02x)\n", bus, dev, fun, off, val, size );
            WritePCICfg( bus, dev, fun, off, size, val );

            Status = STATUS_SUCCESS;
            break;
          }
        case IOCTL_READ_PHYSMEM:
          {
//.........这里部分代码省略.........

NTSTATUS HelloDDKDeviceIOControl(IN PDEVICE_OBJECT pDevObj,
								 IN PIRP pIrp)
{
	NTSTATUS status = STATUS_SUCCESS;
	KdPrint(("Enter HelloDDKDeviceIOControl\n"));

	//得到当前堆栈
	PIO_STACK_LOCATION stack = IoGetCurrentIrpStackLocation(pIrp);
	//得到输入缓冲区大小
	ULONG cbin = stack->Parameters.DeviceIoControl.InputBufferLength;
	//得到输出缓冲区大小
	ULONG cbout = stack->Parameters.DeviceIoControl.OutputBufferLength;
	//得到IOCTL码
	ULONG code = stack->Parameters.DeviceIoControl.IoControlCode;

	ULONG info = 0;

	switch (code)
	{						// process request
		case READ_PORT:
		{
			KdPrint(("READ_PORT\n"));
			//缓冲区方式IOCTL
			//显示输入缓冲区数据
 			PULONG InputBuffer = (PULONG)pIrp->AssociatedIrp.SystemBuffer;
			ULONG port = (ULONG)(*InputBuffer);
			InputBuffer++;
			UCHAR method = (UCHAR)(*InputBuffer);

			KdPrint(("port:%x\n",port));
			KdPrint(("method:%x\n",method));
			//操作输出缓冲区
			PULONG OutputBuffer = (PULONG)pIrp->AssociatedIrp.SystemBuffer;

			if (method==1)//8位操作
			{
				*OutputBuffer = READ_PORT_UCHAR((PUCHAR)port);
			}else if(method==2)//16位操作
			{
				*OutputBuffer = READ_PORT_USHORT((PUSHORT)port);
			}else if(method==4)//32位操作
			{
				*OutputBuffer = READ_PORT_ULONG((PULONG)port);
			}

			//设置实际操作输出缓冲区长度
 			info = 4;

			break;
		}
		case WRITE_PORT:
		{
			KdPrint(("WRITE_PORT\n"));
			//缓冲区方式IOCTL
			//显示输入缓冲区数据
 			PULONG InputBuffer = (PULONG)pIrp->AssociatedIrp.SystemBuffer;
			ULONG port = (ULONG)(*InputBuffer);
			InputBuffer++;
			UCHAR method = (UCHAR)(*InputBuffer);
			InputBuffer++;
			ULONG value = (ULONG)(*InputBuffer);

			KdPrint(("port:%x\n",port));
			KdPrint(("method:%x\n",method));
			KdPrint(("value:%x\n",value));

			//操作输出缓冲区
			PULONG OutputBuffer = (PULONG)pIrp->AssociatedIrp.SystemBuffer;

			if (method==1)//8位操作
			{
				WRITE_PORT_UCHAR((PUCHAR)port,(UCHAR)value);
			}else if(method==2)//16位操作
			{
				WRITE_PORT_USHORT((PUSHORT)port,(USHORT)value);
			}else if(method==4)//32位操作
			{
				WRITE_PORT_ULONG((PULONG)port,(ULONG)value);
			}

			//设置实际操作输出缓冲区长度
 			info = 0;
			break;
		}


		default:
			status = STATUS_INVALID_VARIANT;
	}

	// 完成IRP
	pIrp->IoStatus.Status = status;
	pIrp->IoStatus.Information = info;	// bytes xfered
	IoCompleteRequest( pIrp, IO_NO_INCREMENT );

	KdPrint(("Leave HelloDDKDeviceIOControl\n"));

	return status;
}

NTSTATUS HandleDeviceQueryPower(PDEVICE_OBJECT DeviceObject, PIRP Irp)
{
    NTSTATUS           ntStatus;
    PDEVICE_EXTENSION  deviceExtension;
    PIO_STACK_LOCATION irpStack;
    DEVICE_POWER_STATE deviceState;

    FreeBT_DbgPrint(3, ("FBTUSB: HandleDeviceQueryPower: Entered\n"));

    deviceExtension = (PDEVICE_EXTENSION) DeviceObject->DeviceExtension;
    irpStack = IoGetCurrentIrpStackLocation(Irp);
    deviceState = irpStack->Parameters.Power.State.DeviceState;

    FreeBT_DbgPrint(3, ("FBTUSB: HandleDeviceQueryPower: Query for device power state D%X\n"
                         "FBTUSB: HandleDeviceQueryPower: Current device power state D%X\n",
                         deviceState - 1,
                         deviceExtension->DevPower - 1));

    if (deviceExtension->WaitWakeEnable && deviceState > deviceExtension->DeviceCapabilities.DeviceWake)
	{
        PoStartNextPowerIrp(Irp);
        Irp->IoStatus.Status = ntStatus = STATUS_INVALID_DEVICE_STATE;
        Irp->IoStatus.Information = 0;
        IoCompleteRequest(Irp, IO_NO_INCREMENT);

        FreeBT_DbgPrint(3, ("FBTUSB: HandleDeviceQueryPower::"));
        FreeBT_IoDecrement(deviceExtension);

        return ntStatus;

    }

    if (deviceState < deviceExtension->DevPower)
	{
        ntStatus = STATUS_SUCCESS;

    }

    else
	{
        ntStatus = HoldIoRequests(DeviceObject, Irp);
        if(STATUS_PENDING == ntStatus)
		{
            return ntStatus;

        }

    }

    // on error complete the Irp.
    // on success pass it to the lower layers
    PoStartNextPowerIrp(Irp);
    Irp->IoStatus.Status = ntStatus;
    Irp->IoStatus.Information = 0;
    if(!NT_SUCCESS(ntStatus))
	{
        IoCompleteRequest(Irp, IO_NO_INCREMENT);

    }

    else
	{
        IoSkipCurrentIrpStackLocation(Irp);
        ntStatus=PoCallDriver(deviceExtension->TopOfStackDeviceObject, Irp);

    }

    FreeBT_DbgPrint(3, ("FBTUSB: HandleDeviceQueryPower::"));
    FreeBT_IoDecrement(deviceExtension);

    FreeBT_DbgPrint(3, ("FBTUSB: HandleDeviceQueryPower: Leaving\n"));

    return ntStatus;

}

NTSTATUS HandleDeviceSetPower(IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp)
{
    KIRQL              oldIrql;
    NTSTATUS           ntStatus;
    POWER_STATE        newState;
    PIO_STACK_LOCATION irpStack;
    PDEVICE_EXTENSION  deviceExtension;
    DEVICE_POWER_STATE newDevState,
                       oldDevState;

    FreeBT_DbgPrint(3, ("FBTUSB: HandleDeviceSetPower: Entered\n"));

    deviceExtension = (PDEVICE_EXTENSION)DeviceObject->DeviceExtension;
    irpStack = IoGetCurrentIrpStackLocation(Irp);
    oldDevState = deviceExtension->DevPower;
    newState = irpStack->Parameters.Power.State;
    newDevState = newState.DeviceState;

    FreeBT_DbgPrint(3, ("FBTUSB: HandleDeviceSetPower: Set request for device power state D%X\n"
                         "FBTUSB: HandleDeviceSetPower: Current device power state D%X\n",
                         newDevState - 1,
                         deviceExtension->DevPower - 1));

    if (newDevState < oldDevState)
	{

        FreeBT_DbgPrint(3, ("FBTUSB: HandleDeviceSetPower: Adding power to the device\n"));

        IoCopyCurrentIrpStackLocationToNext(Irp);
        IoSetCompletionRoutine(
                Irp,
                (PIO_COMPLETION_ROUTINE)FinishDevPoUpIrp,
                deviceExtension,
                TRUE,
                TRUE,
                TRUE);

        ntStatus = PoCallDriver(deviceExtension->TopOfStackDeviceObject, Irp);

	}

    else
	{
        // newDevState >= oldDevState

        // hold I/O if transition from D0 -> DX (X = 1, 2, 3)
        // if transition from D1 or D2 to deeper sleep states,
        // I/O queue is already on hold.
        if(PowerDeviceD0 == oldDevState && newDevState > oldDevState)
		{
            // D0 -> DX transition
            FreeBT_DbgPrint(3, ("FBTUSB: HandleDeviceSetPower: Removing power from the device\n"));

            ntStatus = HoldIoRequests(DeviceObject, Irp);
            if (!NT_SUCCESS(ntStatus))
			{
                PoStartNextPowerIrp(Irp);
                Irp->IoStatus.Status = ntStatus;
                Irp->IoStatus.Information = 0;
                IoCompleteRequest(Irp, IO_NO_INCREMENT);

                FreeBT_DbgPrint(3, ("FBTUSB: HandleDeviceSetPower::"));
                FreeBT_IoDecrement(deviceExtension);

                return ntStatus;

            }

            else
			{
                goto HandleDeviceSetPower_Exit;

            }

        }

        else if (PowerDeviceD0 == oldDevState && PowerDeviceD0 == newDevState)
		{
            // D0 -> D0
            // unblock the queue which may have been blocked processing
            // query irp
            FreeBT_DbgPrint(3, ("FBTUSB: HandleDeviceSetPower: A SetD0 request\n"));

            KeAcquireSpinLock(&deviceExtension->DevStateLock, &oldIrql);
            deviceExtension->QueueState = AllowRequests;
            KeReleaseSpinLock(&deviceExtension->DevStateLock, oldIrql);

            ProcessQueuedRequests(deviceExtension);

        }

        IoCopyCurrentIrpStackLocationToNext(Irp);
        IoSetCompletionRoutine(
                Irp,
                (PIO_COMPLETION_ROUTINE) FinishDevPoDnIrp,
                deviceExtension,
                TRUE,
                TRUE,
                TRUE);

//.........这里部分代码省略.........

NTSTATUS
NtfsCommonQueryVolumeInfo (
    IN PIRP_CONTEXT IrpContext,
    IN PIRP Irp
    )

/*++

Routine Description:

    This is the common routine for query Volume Information called by both the
    fsd and fsp threads.

Arguments:

    Irp - Supplies the Irp to process

Return Value:

    NTSTATUS - The return status for the operation

--*/

{
    NTSTATUS Status;
    PIO_STACK_LOCATION IrpSp;
    PFILE_OBJECT FileObject;

    TYPE_OF_OPEN TypeOfOpen;
    PVCB Vcb;
    PFCB Fcb;
    PSCB Scb;
    PCCB Ccb;

    ULONG Length;
    FS_INFORMATION_CLASS FsInformationClass;
    PVOID Buffer;

    ASSERT_IRP_CONTEXT( IrpContext );
    ASSERT_IRP( Irp );

    PAGED_CODE();

    //
    //  Get the current stack location
    //

    IrpSp = IoGetCurrentIrpStackLocation( Irp );

    DebugTrace( +1, Dbg, ("NtfsCommonQueryVolumeInfo...\n") );
    DebugTrace( 0, Dbg, ("IrpContext         = %08lx\n", IrpContext) );
    DebugTrace( 0, Dbg, ("Irp                = %08lx\n", Irp) );
    DebugTrace( 0, Dbg, ("Length             = %08lx\n", IrpSp->Parameters.QueryVolume.Length) );
    DebugTrace( 0, Dbg, ("FsInformationClass = %08lx\n", IrpSp->Parameters.QueryVolume.FsInformationClass) );
    DebugTrace( 0, Dbg, ("Buffer             = %08lx\n", Irp->AssociatedIrp.SystemBuffer) );

    //
    //  Reference our input parameters to make things easier
    //

    Length = IrpSp->Parameters.QueryVolume.Length;
    FsInformationClass = IrpSp->Parameters.QueryVolume.FsInformationClass;
    Buffer = Irp->AssociatedIrp.SystemBuffer;

    //
    //  Extract and decode the file object to get the Vcb, we don't really
    //  care what the type of open is.
    //

    FileObject = IrpSp->FileObject;
    TypeOfOpen = NtfsDecodeFileObject( IrpContext, FileObject, &Vcb, &Fcb, &Scb, &Ccb, TRUE );

    //
    //  We need exclusive access to the Vcb because we are going to verify
    //  it.  After we verify the vcb we'll convert our access to shared
    //

    NtfsAcquireSharedVcb( IrpContext, Vcb, FALSE );

    try {

        //
        //  Based on the information class we'll do different actions.  Each
        //  of the procedures that we're calling fills up the output buffer
        //  if possible and returns true if it successfully filled the buffer
        //  and false if it couldn't wait for any I/O to complete.
        //

        switch (FsInformationClass) {

        case FileFsVolumeInformation:

            Status = NtfsQueryFsVolumeInfo( IrpContext, Vcb, Buffer, &Length );
            break;

        case FileFsSizeInformation:

            Status = NtfsQueryFsSizeInfo( IrpContext, Vcb, Buffer, &Length );
            break;

//.........这里部分代码省略.........

NTSTATUS
DokanDispatchCleanup(__in PDEVICE_OBJECT DeviceObject, __in PIRP Irp)

/*++

Routine Description:

        This device control dispatcher handles Cleanup IRP.

Arguments:

        DeviceObject - Context for the activity.
        Irp          - The device control argument block.

Return Value:

        NTSTATUS

--*/
{
  PDokanVCB vcb;
  PIO_STACK_LOCATION irpSp;
  NTSTATUS status = STATUS_INVALID_PARAMETER;
  PFILE_OBJECT fileObject;
  PDokanCCB ccb = NULL;
  PDokanFCB fcb = NULL;
  PEVENT_CONTEXT eventContext;
  ULONG eventLength;

  __try {

    DDbgPrint("==> DokanCleanup\n");

    irpSp = IoGetCurrentIrpStackLocation(Irp);
    fileObject = irpSp->FileObject;

    DDbgPrint("  ProcessId %lu\n", IoGetRequestorProcessId(Irp));
    DokanPrintFileName(fileObject);

    // Cleanup must be success in any case
    if (fileObject == NULL) {
      DDbgPrint("  fileObject == NULL\n");
      status = STATUS_SUCCESS;
      __leave;
    }

    vcb = DeviceObject->DeviceExtension;
    if (vcb == NULL) {
      DDbgPrint("  No device extension\n");
      status = STATUS_SUCCESS;
      __leave;
    }

    if (GetIdentifierType(vcb) != VCB ||
        !DokanCheckCCB(vcb->Dcb, fileObject->FsContext2)) {
      status = STATUS_SUCCESS;
      __leave;
    }

    ccb = fileObject->FsContext2;
    ASSERT(ccb != NULL);

    fcb = ccb->Fcb;
    ASSERT(fcb != NULL);

    FlushFcb(fcb, fileObject);
    
    DokanFCBLockRW(fcb);

    eventLength = sizeof(EVENT_CONTEXT) + fcb->FileName.Length;
    eventContext = AllocateEventContext(vcb->Dcb, Irp, eventLength, ccb);

    if (eventContext == NULL) {
      status = STATUS_INSUFFICIENT_RESOURCES;
      DokanFCBUnlock(fcb);
      __leave;
    }

    fileObject->Flags |= FO_CLEANUP_COMPLETE;

    eventContext->Context = ccb->UserContext;
    eventContext->FileFlags |= DokanCCBFlagsGet(ccb);
    // DDbgPrint("   get Context %X\n", (ULONG)ccb->UserContext);

    // copy the filename to EventContext from ccb
    eventContext->Operation.Cleanup.FileNameLength = fcb->FileName.Length;
    RtlCopyMemory(eventContext->Operation.Cleanup.FileName,
                  fcb->FileName.Buffer, fcb->FileName.Length);

    // FsRtlCheckOpLock is called with non-NULL completion routine - not blocking.
    status = FsRtlCheckOplock(DokanGetFcbOplock(fcb), Irp, eventContext,
                              DokanOplockComplete, DokanPrePostIrp);
    DokanFCBUnlock(fcb);

    //
    //  if FsRtlCheckOplock returns STATUS_PENDING the IRP has been posted
    //  to service an oplock break and we need to leave now.
    //
    if (status != STATUS_SUCCESS) {
      if (status == STATUS_PENDING) {
//.........这里部分代码省略.........

__drv_mustHoldCriticalRegion
NTSTATUS
FFSMountVolume(
	IN PFFS_IRP_CONTEXT IrpContext)
{
	PDEVICE_OBJECT              MainDeviceObject;
	BOOLEAN                     GlobalDataResourceAcquired = FALSE;
	PIRP                        Irp;
	PIO_STACK_LOCATION          IoStackLocation;
	PDEVICE_OBJECT              TargetDeviceObject;
	NTSTATUS                    Status = STATUS_UNRECOGNIZED_VOLUME;
	PDEVICE_OBJECT              VolumeDeviceObject = NULL;
	PFFS_VCB                    Vcb;
	PFFS_SUPER_BLOCK            FFSSb = NULL;
	ULONG                       dwBytes;
	DISK_GEOMETRY               DiskGeometry;

    PAGED_CODE();

	_SEH2_TRY
	{
		ASSERT(IrpContext != NULL);

		ASSERT((IrpContext->Identifier.Type == FFSICX) &&
				(IrpContext->Identifier.Size == sizeof(FFS_IRP_CONTEXT)));

		MainDeviceObject = IrpContext->DeviceObject;

		//
		//  Make sure we can wait.
		//

		SetFlag(IrpContext->Flags, IRP_CONTEXT_FLAG_WAIT);

		//
		// This request is only allowed on the main device object
		//
		if (MainDeviceObject != FFSGlobal->DeviceObject)
		{
			Status = STATUS_INVALID_DEVICE_REQUEST;
			_SEH2_LEAVE;
		}

		ExAcquireResourceExclusiveLite(
				&(FFSGlobal->Resource),
				TRUE);

		GlobalDataResourceAcquired = TRUE;

		if (FlagOn(FFSGlobal->Flags, FFS_UNLOAD_PENDING))
		{
			Status = STATUS_UNRECOGNIZED_VOLUME;
			_SEH2_LEAVE;
		}

		Irp = IrpContext->Irp;

		IoStackLocation = IoGetCurrentIrpStackLocation(Irp);

		TargetDeviceObject =
			IoStackLocation->Parameters.MountVolume.DeviceObject;

		dwBytes = sizeof(DISK_GEOMETRY);
		Status = FFSDiskIoControl(
					TargetDeviceObject,
					IOCTL_DISK_GET_DRIVE_GEOMETRY,
					NULL,
					0,
					&DiskGeometry,
					&dwBytes);

		if (!NT_SUCCESS(Status))
		{
			_SEH2_LEAVE;
		}

		Status = IoCreateDevice(
					MainDeviceObject->DriverObject,
					sizeof(FFS_VCB),
					NULL,
					FILE_DEVICE_DISK_FILE_SYSTEM,
					0,
					FALSE,
					&VolumeDeviceObject);

		if (!NT_SUCCESS(Status))
		{
			_SEH2_LEAVE;
		}

		VolumeDeviceObject->StackSize = (CCHAR)(TargetDeviceObject->StackSize + 1);

		if (TargetDeviceObject->AlignmentRequirement > 
				VolumeDeviceObject->AlignmentRequirement)
		{

			VolumeDeviceObject->AlignmentRequirement = 
				TargetDeviceObject->AlignmentRequirement;
		}

//.........这里部分代码省略.........

static NTSTATUS
CdfsMountVolume(PDEVICE_OBJECT DeviceObject,
                PIRP Irp)
{
    PDEVICE_EXTENSION DeviceExt = NULL;
    PDEVICE_OBJECT NewDeviceObject = NULL;
    PDEVICE_OBJECT DeviceToMount;
    PIO_STACK_LOCATION Stack;
    PFCB Fcb = NULL;
    PCCB Ccb = NULL;
    PVPB Vpb;
    NTSTATUS Status;
    CDINFO CdInfo;

    DPRINT("CdfsMountVolume() called\n");

    if (DeviceObject != CdfsGlobalData->DeviceObject)
    {
        Status = STATUS_INVALID_DEVICE_REQUEST;
        goto ByeBye;
    }

    Stack = IoGetCurrentIrpStackLocation(Irp);
    DeviceToMount = Stack->Parameters.MountVolume.DeviceObject;
    Vpb = Stack->Parameters.MountVolume.Vpb;

    Status = CdfsGetVolumeData(DeviceToMount, &CdInfo);
    if (!NT_SUCCESS(Status))
    {
        goto ByeBye;
    }

    Status = IoCreateDevice(CdfsGlobalData->DriverObject,
        sizeof(DEVICE_EXTENSION),
        NULL,
        FILE_DEVICE_CD_ROM_FILE_SYSTEM,
        DeviceToMount->Characteristics,
        FALSE,
        &NewDeviceObject);
    if (!NT_SUCCESS(Status))
        goto ByeBye;

    NewDeviceObject->Flags = NewDeviceObject->Flags | DO_DIRECT_IO;
    NewDeviceObject->Flags &= ~DO_VERIFY_VOLUME;
    DeviceExt = (PVOID)NewDeviceObject->DeviceExtension;
    RtlZeroMemory(DeviceExt,
        sizeof(DEVICE_EXTENSION));

    Vpb->SerialNumber = CdInfo.SerialNumber;
    Vpb->VolumeLabelLength = CdInfo.VolumeLabelLength;
    RtlCopyMemory(Vpb->VolumeLabel, CdInfo.VolumeLabel, CdInfo.VolumeLabelLength);
    RtlCopyMemory(&DeviceExt->CdInfo, &CdInfo, sizeof(CDINFO));

    NewDeviceObject->Vpb = DeviceToMount->Vpb;

    DeviceExt->VolumeDevice = NewDeviceObject;
    DeviceExt->StorageDevice = DeviceToMount;
    DeviceExt->StorageDevice->Vpb->DeviceObject = NewDeviceObject;
    DeviceExt->StorageDevice->Vpb->RealDevice = DeviceExt->StorageDevice;
    DeviceExt->StorageDevice->Vpb->Flags |= VPB_MOUNTED;
    NewDeviceObject->StackSize = DeviceExt->StorageDevice->StackSize + 1;
    NewDeviceObject->Flags &= ~DO_DEVICE_INITIALIZING;

    /* Close (and cleanup) might be called from IoCreateStreamFileObject 
    * but we use this resource from CdfsCleanup, therefore it should be
    * initialized no later than this. */
    ExInitializeResourceLite(&DeviceExt->DirResource);

    DeviceExt->StreamFileObject = IoCreateStreamFileObject(NULL,
        DeviceExt->StorageDevice);

    Fcb = CdfsCreateFCB(NULL);
    if (Fcb == NULL)
    {
        Status = STATUS_INSUFFICIENT_RESOURCES;
        goto ByeBye;
    }

    Ccb = ExAllocatePoolWithTag(NonPagedPool,
        sizeof(CCB),
        TAG_CCB);
    if (Ccb == NULL)
    {
        Status =  STATUS_INSUFFICIENT_RESOURCES;
        goto ByeBye;
    }
    RtlZeroMemory(Ccb,
        sizeof(CCB));

    DeviceExt->StreamFileObject->ReadAccess = TRUE;
    DeviceExt->StreamFileObject->WriteAccess = FALSE;
    DeviceExt->StreamFileObject->DeleteAccess = FALSE;
    DeviceExt->StreamFileObject->FsContext = Fcb;
    DeviceExt->StreamFileObject->FsContext2 = Ccb;
    DeviceExt->StreamFileObject->SectionObjectPointer = &Fcb->SectionObjectPointers;
    DeviceExt->StreamFileObject->PrivateCacheMap = NULL;
    DeviceExt->StreamFileObject->Vpb = DeviceExt->Vpb;
    Ccb->PtrFileObject = DeviceExt->StreamFileObject;
    Fcb->FileObject = DeviceExt->StreamFileObject;
    Fcb->DevExt = (PDEVICE_EXTENSION)DeviceExt->StorageDevice;
//.........这里部分代码省略.........

__drv_mustHoldCriticalRegion
NTSTATUS
FFSInvalidateVolumes(
	IN PFFS_IRP_CONTEXT IrpContext)
{
	NTSTATUS            Status;
	PIRP                Irp;
	PIO_STACK_LOCATION  IrpSp;

	HANDLE              Handle;

	PLIST_ENTRY         ListEntry;

	PFILE_OBJECT        FileObject;
	PDEVICE_OBJECT      DeviceObject;
	BOOLEAN             GlobalResourceAcquired = FALSE;

	LUID Privilege = {SE_TCB_PRIVILEGE, 0};

	_SEH2_TRY
	{
		Irp   = IrpContext->Irp;
		IrpSp = IoGetCurrentIrpStackLocation(Irp);

		if (!SeSinglePrivilegeCheck(Privilege, Irp->RequestorMode))
		{
			Status = STATUS_PRIVILEGE_NOT_HELD;
			_SEH2_LEAVE;
		}

		if (
#if !defined(_GNU_NTIFS_) || defined(__REACTOS__)
				IrpSp->Parameters.FileSystemControl.InputBufferLength
#else
				((PEXTENDED_IO_STACK_LOCATION)(IrpSp))->
				Parameters.FileSystemControl.InputBufferLength
#endif
				!= sizeof(HANDLE))
		{
			Status = STATUS_INVALID_PARAMETER;

			_SEH2_LEAVE;
		}

		Handle = *(PHANDLE)Irp->AssociatedIrp.SystemBuffer;

		Status = ObReferenceObjectByHandle(Handle,
				0,
				*IoFileObjectType,
				KernelMode,
				(void **)&FileObject,
				NULL);

		if (!NT_SUCCESS(Status))
		{
			_SEH2_LEAVE;
		}
		else
		{
			ObDereferenceObject(FileObject);
			DeviceObject = FileObject->DeviceObject;
		}

		FFSPrint((DBG_INFO, "FFSInvalidateVolumes: FileObject=%xh ...\n", FileObject));

		ExAcquireResourceExclusiveLite(
				&FFSGlobal->Resource,
				TRUE);

		GlobalResourceAcquired = TRUE;

		ListEntry = FFSGlobal->VcbList.Flink;

		while (ListEntry != &FFSGlobal->VcbList)
		{
			PFFS_VCB Vcb;

			Vcb = CONTAINING_RECORD(ListEntry, FFS_VCB, Next);

			ListEntry = ListEntry->Flink;

			FFSPrint((DBG_INFO, "FFSInvalidateVolumes: Vcb=%xh Vcb->Vpb=%xh...\n", Vcb, Vcb->Vpb));
			if (Vcb->Vpb && (Vcb->Vpb->RealDevice == DeviceObject))
			{
				ExAcquireResourceExclusiveLite(&Vcb->MainResource, TRUE);
				FFSPrint((DBG_INFO, "FFSInvalidateVolumes: FFSPurgeVolume...\n"));
				FFSPurgeVolume(Vcb, FALSE);
				ClearFlag(Vcb->Flags, VCB_MOUNTED);
				ExReleaseResourceLite(&Vcb->MainResource);

				//
				// Vcb is still attached on the list ......
				//

				if (ListEntry->Blink == &Vcb->Next)
				{
					FFSPrint((DBG_INFO, "FFSInvalidateVolumes: FFSCheckDismount...\n"));
					FFSCheckDismount(IrpContext, Vcb, FALSE);
				}
			}
//.........这里部分代码省略.........

__drv_mustHoldCriticalRegion
NTSTATUS
FFSUserFsRequest(
	IN PFFS_IRP_CONTEXT IrpContext)
{
	PIRP                Irp;
	PIO_STACK_LOCATION  IoStackLocation;
	ULONG               FsControlCode;
	NTSTATUS            Status;

    PAGED_CODE();

	ASSERT(IrpContext);

	ASSERT((IrpContext->Identifier.Type == FFSICX) &&
			(IrpContext->Identifier.Size == sizeof(FFS_IRP_CONTEXT)));

	Irp = IrpContext->Irp;

	IoStackLocation = IoGetCurrentIrpStackLocation(Irp);

#if !defined(_GNU_NTIFS_) || defined(__REACTOS__)
	FsControlCode =
		IoStackLocation->Parameters.FileSystemControl.FsControlCode;
#else
	FsControlCode = ((PEXTENDED_IO_STACK_LOCATION)
			IoStackLocation)->Parameters.FileSystemControl.FsControlCode;
#endif

	switch (FsControlCode)
	{
		case FSCTL_LOCK_VOLUME:
			Status = FFSLockVolume(IrpContext);
			break;

		case FSCTL_UNLOCK_VOLUME:
			Status = FFSUnlockVolume(IrpContext);
			break;

		case FSCTL_DISMOUNT_VOLUME:
			Status = FFSDismountVolume(IrpContext);
			break;

		case FSCTL_IS_VOLUME_MOUNTED:
			Status = FFSIsVolumeMounted(IrpContext);
			break;

		case FSCTL_INVALIDATE_VOLUMES:
			Status = FFSInvalidateVolumes(IrpContext);
			break;

#if (_WIN32_WINNT >= 0x0500)
		case FSCTL_ALLOW_EXTENDED_DASD_IO:
			Status = FFSAllowExtendedDasdIo(IrpContext);
			break;
#endif //(_WIN32_WINNT >= 0x0500)

		default:

			FFSPrint((DBG_ERROR, "FFSUserFsRequest: Invalid User Request: %xh.\n", FsControlCode));
			Status = STATUS_INVALID_DEVICE_REQUEST;

			FFSCompleteIrpContext(IrpContext,  Status);
	}

	return Status;
}

__drv_mustHoldCriticalRegion
NTSTATUS
FFSUnlockVolume(
	IN PFFS_IRP_CONTEXT IrpContext)
{
	PIO_STACK_LOCATION IrpSp;
	PDEVICE_OBJECT     DeviceObject;
	NTSTATUS           Status;
	PFFS_VCB           Vcb = 0;
	BOOLEAN            VcbResourceAcquired = FALSE;

    PAGED_CODE();

	_SEH2_TRY
	{
		ASSERT(IrpContext != NULL);

		ASSERT((IrpContext->Identifier.Type == FFSICX) &&
				(IrpContext->Identifier.Size == sizeof(FFS_IRP_CONTEXT)));

		DeviceObject = IrpContext->DeviceObject;

		//
		// This request is not allowed on the main device object
		//
		if (DeviceObject == FFSGlobal->DeviceObject)
		{
			Status = STATUS_INVALID_PARAMETER;
			_SEH2_LEAVE;
		}

		Vcb = (PFFS_VCB)DeviceObject->DeviceExtension;

		ASSERT(Vcb != NULL);

		ASSERT((Vcb->Identifier.Type == FFSVCB) &&
				(Vcb->Identifier.Size == sizeof(FFS_VCB)));

		ASSERT(IsMounted(Vcb));

		IrpSp = IoGetCurrentIrpStackLocation(IrpContext->Irp);

		ExAcquireResourceExclusiveLite(
				&Vcb->MainResource,
				TRUE);

		VcbResourceAcquired = TRUE;

		Status = FFSUnlockVcb(Vcb, IrpSp->FileObject);
	}
	_SEH2_FINALLY
	{
		if (VcbResourceAcquired)
		{
			ExReleaseResourceForThreadLite(
					&Vcb->MainResource,
					ExGetCurrentResourceThread());
		}

		if (!IrpContext->ExceptionInProgress)
		{
			FFSCompleteIrpContext(IrpContext,  Status);
		}
	} _SEH2_END;

	return Status;
}

__drv_mustHoldCriticalRegion
NTSTATUS
FFSVerifyVolume(
	IN PFFS_IRP_CONTEXT IrpContext)
{
	PDEVICE_OBJECT          DeviceObject;
	NTSTATUS                Status = STATUS_UNSUCCESSFUL;
	PFFS_SUPER_BLOCK        FFSSb = NULL;
	PFFS_VCB                Vcb = 0;
	BOOLEAN                 VcbResourceAcquired = FALSE;
	BOOLEAN                 GlobalResourceAcquired = FALSE;
	PIRP                    Irp;
	PIO_STACK_LOCATION      IoStackLocation;
	ULONG                   ChangeCount;
	ULONG                   dwReturn;

    PAGED_CODE();

	_SEH2_TRY
	{
		ASSERT(IrpContext != NULL);

		ASSERT((IrpContext->Identifier.Type == FFSICX) &&
				(IrpContext->Identifier.Size == sizeof(FFS_IRP_CONTEXT)));

		DeviceObject = IrpContext->DeviceObject;
		//
		// This request is not allowed on the main device object
		//
		if (DeviceObject == FFSGlobal->DeviceObject)
		{
			Status = STATUS_INVALID_DEVICE_REQUEST;
			_SEH2_LEAVE;
		}

		ExAcquireResourceExclusiveLite(
				&FFSGlobal->Resource,
				TRUE);

		GlobalResourceAcquired = TRUE;

		Vcb = (PFFS_VCB)DeviceObject->DeviceExtension;

		ASSERT(Vcb != NULL);

		ASSERT((Vcb->Identifier.Type == FFSVCB) &&
				(Vcb->Identifier.Size == sizeof(FFS_VCB)));

		ExAcquireResourceExclusiveLite(
				&Vcb->MainResource,
				TRUE);

		VcbResourceAcquired = TRUE;

		if (!FlagOn(Vcb->TargetDeviceObject->Flags, DO_VERIFY_VOLUME))
		{
			Status = STATUS_SUCCESS;
			_SEH2_LEAVE;
		}

		if (!IsMounted(Vcb))
		{
			Status = STATUS_WRONG_VOLUME;
			_SEH2_LEAVE;
		}

		dwReturn = sizeof(ULONG);
		Status = FFSDiskIoControl(
				Vcb->TargetDeviceObject,
				IOCTL_DISK_CHECK_VERIFY,
				NULL,
				0,
				&ChangeCount,
				&dwReturn);

		if (ChangeCount != Vcb->ChangeCount)
		{
			Status = STATUS_WRONG_VOLUME;
			_SEH2_LEAVE;
		}

		Irp = IrpContext->Irp;

		IoStackLocation = IoGetCurrentIrpStackLocation(Irp);

		if (((((FFSSb = FFSLoadSuper(Vcb, TRUE, SBLOCK_UFS1)) != NULL) && (FFSSb->fs_magic == FS_UFS1_MAGIC)) ||
			 (((FFSSb = FFSLoadSuper(Vcb, TRUE, SBLOCK_UFS2)) != NULL) && (FFSSb->fs_magic == FS_UFS2_MAGIC))) &&
				(memcmp(FFSSb->fs_id, SUPER_BLOCK->fs_id, 8) == 0) &&
				(memcmp(FFSSb->fs_volname, SUPER_BLOCK->fs_volname, 16) == 0))
		{
			ClearFlag(Vcb->TargetDeviceObject->Flags, DO_VERIFY_VOLUME);

			if (FFSIsMediaWriteProtected(IrpContext, Vcb->TargetDeviceObject))
			{
				SetFlag(Vcb->Flags, VCB_WRITE_PROTECTED);
			}
			else
			{
				ClearFlag(Vcb->Flags, VCB_WRITE_PROTECTED);
			}
//.........这里部分代码省略.........

NTSTATUS
RegisterPendingIrpMain(
    __in PDEVICE_OBJECT DeviceObject,
    __in PIRP			Irp,
	__in ULONG			SerialNumber,
	__in PIRP_LIST		IrpList,
	__in ULONG			Flags,
	__in ULONG			CheckMount
    )
{
 	PIRP_ENTRY			irpEntry;
    PIO_STACK_LOCATION	irpSp;
    KIRQL				oldIrql;
 
	DDbgPrint("==> DokanRegisterPendingIrpMain\n");

	if (GetIdentifierType(DeviceObject->DeviceExtension) == VCB) {
		PDokanVCB vcb = DeviceObject->DeviceExtension;
		if (CheckMount && !vcb->Dcb->Mounted) {
			DDbgPrint(" device is not mounted\n");
			return STATUS_INSUFFICIENT_RESOURCES;
		}
	}

    irpSp = IoGetCurrentIrpStackLocation(Irp);
 
    // Allocate a record and save all the event context.
    irpEntry = DokanAllocateIrpEntry();

    if (NULL == irpEntry) {
		DDbgPrint("  can't allocate IRP_ENTRY\n");
        return  STATUS_INSUFFICIENT_RESOURCES;
    }

	RtlZeroMemory(irpEntry, sizeof(IRP_ENTRY));

    InitializeListHead(&irpEntry->ListEntry);

	irpEntry->SerialNumber		= SerialNumber;
    irpEntry->FileObject		= irpSp->FileObject;
    irpEntry->Irp				= Irp;
	irpEntry->IrpSp				= irpSp;
	irpEntry->IrpList			= IrpList;
	irpEntry->Flags				= Flags;

	DokanUpdateTimeout(&irpEntry->TickCount, DOKAN_IRP_PENDING_TIMEOUT);

	//DDbgPrint("  Lock IrpList.ListLock\n");
	ASSERT(KeGetCurrentIrql() <= DISPATCH_LEVEL);
    KeAcquireSpinLock(&IrpList->ListLock, &oldIrql);

    IoSetCancelRoutine(Irp, DokanIrpCancelRoutine);

    if (Irp->Cancel) {
        if (IoSetCancelRoutine(Irp, NULL) != NULL) {
			//DDbgPrint("  Release IrpList.ListLock %d\n", __LINE__);
            KeReleaseSpinLock(&IrpList->ListLock, oldIrql);

            DokanFreeIrpEntry(irpEntry);

            return STATUS_CANCELLED;
        }
	}

    IoMarkIrpPending(Irp);

    InsertTailList(&IrpList->ListHead, &irpEntry->ListEntry);

    irpEntry->CancelRoutineFreeMemory = FALSE;

	// save the pointer in order to be accessed by cancel routine
	Irp->Tail.Overlay.DriverContext[DRIVER_CONTEXT_IRP_ENTRY] =  irpEntry;


	KeSetEvent(&IrpList->NotEmpty, IO_NO_INCREMENT, FALSE);

	//DDbgPrint("  Release IrpList.ListLock\n");
    KeReleaseSpinLock(&IrpList->ListLock, oldIrql);

	DDbgPrint("<== DokanRegisterPendingIrpMain\n");
    return STATUS_PENDING;;
}

NTSTATUS
NTAPI
PciDispatchIrp(IN PDEVICE_OBJECT DeviceObject,
               IN PIRP Irp)
{
    PPCI_FDO_EXTENSION DeviceExtension;
    PIO_STACK_LOCATION IoStackLocation;
    PPCI_MJ_DISPATCH_TABLE IrpDispatchTable;
    BOOLEAN PassToPdo;
    NTSTATUS Status;
    PPCI_MN_DISPATCH_TABLE TableArray = NULL, Table;
    USHORT MaxMinor;
    PCI_DISPATCH_STYLE DispatchStyle = 0;
    PCI_DISPATCH_FUNCTION DispatchFunction = NULL;
    DPRINT1("PCI: Dispatch IRP\n");

    /* Get the extension and I/O stack location for this IRP */
    DeviceExtension = (PPCI_FDO_EXTENSION)DeviceObject->DeviceExtension;
    IoStackLocation = IoGetCurrentIrpStackLocation(Irp);
    ASSERT((DeviceExtension->ExtensionType == PciPdoExtensionType) ||
           (DeviceExtension->ExtensionType == PciFdoExtensionType));

    /* Deleted extensions don't respond to IRPs */
    if (DeviceExtension->DeviceState == PciDeleted)
    {
        /* Fail this IRP */
        Status = STATUS_NO_SUCH_DEVICE;
        PassToPdo = FALSE;
    }
    else
    {
        /* Otherwise, get the dispatch table for the extension */
        IrpDispatchTable = DeviceExtension->IrpDispatchTable;

        /* And choose which function table to use */
        switch (IoStackLocation->MajorFunction)
        {
            case IRP_MJ_POWER:

                /* Power Manager IRPs */
                TableArray = IrpDispatchTable->PowerIrpDispatchTable;
                MaxMinor = IrpDispatchTable->PowerIrpMaximumMinorFunction;
                break;

            case IRP_MJ_PNP:

                /* Plug-and-Play Manager IRPs */
                TableArray = IrpDispatchTable->PnpIrpDispatchTable;
                MaxMinor = IrpDispatchTable->PnpIrpMaximumMinorFunction;
                break;

            case IRP_MJ_SYSTEM_CONTROL:

                /* WMI IRPs */
                DispatchFunction = IrpDispatchTable->SystemControlIrpDispatchFunction;
                DispatchStyle = IrpDispatchTable->SystemControlIrpDispatchStyle;
                MaxMinor = 0xFFFF;
                break;

            default:

                /* Unrecognized IRPs */
                DispatchFunction = IrpDispatchTable->OtherIrpDispatchFunction;
                DispatchStyle = IrpDispatchTable->OtherIrpDispatchStyle;
                MaxMinor = 0xFFFF;
                break;
        }

        /* Only deal with recognized IRPs */
        if (MaxMinor != 0xFFFF)
        {
            /* Make sure the function is recognized */
            if (IoStackLocation->MinorFunction > MaxMinor)
            {
                /* Pick the terminator, which should return unrecognized */
                Table = &TableArray[MaxMinor + 1];
            }
            else
            {
                /* Pick the appropriate table for this function */
                Table = &TableArray[IoStackLocation->MinorFunction];
            }

            /* From that table, get the function code and dispatch style */
            DispatchStyle = Table->DispatchStyle;
            DispatchFunction = Table->DispatchFunction;
        }

        /* Print out debugging information, and see if we should break */
        if (PciDebugIrpDispatchDisplay(IoStackLocation,
                                       DeviceExtension,
                                       MaxMinor))
        {
            /* The developer/user wants us to break for this IRP, do it */
            DbgBreakPoint();
        }

        /* Check if this IRP should be sent up the stack first */
        if (DispatchStyle == IRP_UPWARD)
        {
//.........这里部分代码省略.........

static NTSTATUS
CdfsVerifyVolume(PDEVICE_OBJECT DeviceObject,
                 PIRP Irp)
{
    PDEVICE_EXTENSION DeviceExt;
    PIO_STACK_LOCATION Stack;
    NTSTATUS Status;
    CDINFO CdInfo;
    PLIST_ENTRY Entry;
    PFCB Fcb;
    PVPB VpbToVerify;

    DPRINT1 ("CdfsVerifyVolume() called\n");

    DeviceExt = DeviceObject->DeviceExtension;

    Stack = IoGetCurrentIrpStackLocation (Irp);
    VpbToVerify = Stack->Parameters.VerifyVolume.Vpb;

    FsRtlEnterFileSystem();
    ExAcquireResourceExclusiveLite (&am