C++ Jim_NewStringObj函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中Jim_NewStringObj函数的典型用法代码示例。如果您正苦于以下问题：C++ Jim_NewStringObj函数的具体用法？C++ Jim_NewStringObj怎么用？C++ Jim_NewStringObj使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了Jim_NewStringObj函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: JimAioOpenCommand

static int JimAioOpenCommand(Jim_Interp *interp, int argc,
        Jim_Obj *const *argv)
{
    const char *mode;
    const char *filename;

    if (argc != 2 && argc != 3) {
        Jim_WrongNumArgs(interp, 1, argv, "filename ?mode?");
        return JIM_ERR;
    }

    mode = (argc == 3) ? Jim_String(argv[2]) : "r";
    filename = Jim_String(argv[1]);

#ifdef jim_ext_tclcompat
    /* If the filename starts with '|', use popen instead */
    if (*filename == '|') {
        Jim_Obj *evalObj[3];

        evalObj[0] = Jim_NewStringObj(interp, "popen", -1);
        evalObj[1] = Jim_NewStringObj(interp, filename + 1, -1);
        evalObj[2] = Jim_NewStringObj(interp, mode, -1);

        return Jim_EvalObjVector(interp, 3, evalObj);
    }
#endif
    return JimMakeChannel(interp, NULL, -1, argv[1], "aio.handle%ld", 0, mode);
}

开发者ID:alex-shpilkin，项目名称:jimtcl，代码行数:28，代码来源:jim-aio.c

示例2: Jim_PosixWaitCommand

/*
 * os.wait ?-nohang? pid
 *
 * An interface to waitpid(2)
 *
 * Returns a 3 element list.
 *
 * If -nohang is specified, and the process is still alive, returns
 *
 *   {0 none 0}
 * 
 * If the process does not exist or has already been waited for, returns:
 *
 *   {-1 error <error-description>} 
 *
 * If the process exited normally, returns:
 *
 *   {<pid> exit <exit-status>} 
 *
 * If the process terminated on a signal, returns:
 *
 *   {<pid> signal <signal-number>} 
 *
 * Otherwise (core dump, stopped, continued, ...), returns:
 *
 *   {<pid> other 0}
 */
static int Jim_PosixWaitCommand(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
    int nohang = 0;
    long pid;
    int status;
    Jim_Obj *listObj;
    const char *type;
    int value;

    if (argc > 1 && Jim_CompareStringImmediate(interp, argv[1], "-nohang")) {
        nohang = 1;
    }
    if (argc != nohang + 2) {
        Jim_WrongNumArgs(interp, 1, argv, "?-nohang? pid");
        return JIM_ERR;
    }
    if (Jim_GetLong(interp, argv[nohang + 1], &pid) != JIM_OK) {
        return JIM_ERR;
    }

    pid = waitpid(pid, &status, nohang ? WNOHANG : 0);
    listObj = Jim_NewListObj(interp, NULL, 0);
    Jim_ListAppendElement(interp, listObj, Jim_NewIntObj(interp, pid));
    if (pid < 0) {
        type = "error";
        value = errno;
    }
    else if (pid == 0) {
        type = "none";
        value = 0;
    }
    else if (WIFEXITED(status)) {
        type = "exit";
        value = WEXITSTATUS(status);
    }
    else if (WIFSIGNALED(status)) {
        type = "signal";
        value = WTERMSIG(status);
    }
    else {
        type = "other";
        value = 0;
    }

    Jim_ListAppendElement(interp, listObj, Jim_NewStringObj(interp, type, -1));
    if (pid < 0) {
        Jim_ListAppendElement(interp, listObj, Jim_NewStringObj(interp, strerror(value), -1));
    }
    else {
        Jim_ListAppendElement(interp, listObj, Jim_NewIntObj(interp, value));
    }
    Jim_SetResult(interp, listObj);
    return JIM_OK;
}

开发者ID:marrero，项目名称:jimtcl，代码行数:81，代码来源:jim-posix.c

示例3: Win32_GetSystemInfo

static int
Win32_GetSystemInfo(Jim_Interp *interp, int objc, Jim_Obj *const *objv)
{
    Jim_Obj *a[20];
    SYSTEM_INFO si;
    int n = 0;
    struct pa_map { int arch; const char *name; };
    struct pa_map *p, map[] = {
        { PROCESSOR_ARCHITECTURE_INTEL,  "intel" },
        { PROCESSOR_ARCHITECTURE_MIPS,   "mips" },
        { PROCESSOR_ARCHITECTURE_ALPHA,  "alpha" },
        { PROCESSOR_ARCHITECTURE_PPC,    "ppc" },
        { PROCESSOR_ARCHITECTURE_SHX,    "shx" },
        { PROCESSOR_ARCHITECTURE_ARM,    "arm" },
        { PROCESSOR_ARCHITECTURE_IA64,   "ia64" },
        { PROCESSOR_ARCHITECTURE_ALPHA64,"alpha64" },
        { PROCESSOR_ARCHITECTURE_MSIL,   "msil" },
        { PROCESSOR_ARCHITECTURE_AMD64,  "amd64"},
        { PROCESSOR_ARCHITECTURE_IA32_ON_WIN64, "ia32onwin64" },
        { PROCESSOR_ARCHITECTURE_UNKNOWN,"unknown" }
    };
    JIM_NOTUSED(objc);
    JIM_NOTUSED(objv);
    
    GetSystemInfo(&si);

    a[n++] = Jim_NewStringObj(interp, "ProcessorArchitecture", -1);
    for (p = map; p->arch != PROCESSOR_ARCHITECTURE_UNKNOWN; ++p) {
        if (p->arch == si.wProcessorArchitecture) {
            break;
        }
    }
    a[n++] = Jim_NewStringObj(interp, p->name, -1);

#define JIMADD(name,element) \
    a[n++] = Jim_NewStringObj(interp, #name, -1); \
    a[n++] = Jim_NewIntObj(interp, (jim_wide)si. ## element )

    JIMADD(PageSize, dwPageSize);
    JIMADD(MinimumApplicationAddress, lpMinimumApplicationAddress);
    JIMADD(MaximumApplicationAddress, lpMaximumApplicationAddress);
    JIMADD(ActiveProcessorMask, dwActiveProcessorMask);
    JIMADD(NumberOfProcessors, dwNumberOfProcessors);
    JIMADD(ProcessorType, dwProcessorType);
    JIMADD(AllocationGranularity, dwAllocationGranularity);
    JIMADD(ProcessorLevel, wProcessorLevel);
    JIMADD(ProcessorRevision, wProcessorRevision);
#undef JIMADD

    Jim_SetResult(interp, Jim_NewListObj(interp, a, n));
    return JIM_OK;
}

开发者ID:alepharchives，项目名称:Jim，代码行数:52，代码来源:jim-win32.c

示例4: StoreStatData

static int StoreStatData(Jim_Interp *interp, Jim_Obj *varName, const struct stat *sb)
{
    /* Just use a list to store the data */
    Jim_Obj *listObj = Jim_NewListObj(interp, NULL, 0);

    AppendStatElement(interp, listObj, "dev", sb->st_dev);
    AppendStatElement(interp, listObj, "ino", sb->st_ino);
    AppendStatElement(interp, listObj, "mode", sb->st_mode);
    AppendStatElement(interp, listObj, "nlink", sb->st_nlink);
    AppendStatElement(interp, listObj, "uid", sb->st_uid);
    AppendStatElement(interp, listObj, "gid", sb->st_gid);
    AppendStatElement(interp, listObj, "size", sb->st_size);
    AppendStatElement(interp, listObj, "atime", sb->st_atime);
    AppendStatElement(interp, listObj, "mtime", sb->st_mtime);
    AppendStatElement(interp, listObj, "ctime", sb->st_ctime);
    Jim_ListAppendElement(interp, listObj, Jim_NewStringObj(interp, "type", -1));
    Jim_ListAppendElement(interp, listObj, Jim_NewStringObj(interp, JimGetFileType((int)sb->st_mode), -1));

    /* Was a variable specified? */
    if (varName) {
        Jim_Obj *objPtr = Jim_GetVariable(interp, varName, JIM_NONE);
        if (objPtr) {
            if (Jim_DictSize(interp, objPtr) < 0) {
                /* This message matches the one from Tcl */
                Jim_SetResultFormatted(interp, "can't set \"%#s(dev)\": variable isn't array", varName);
                Jim_FreeNewObj(interp, listObj);
                return JIM_ERR;
            }

            if (Jim_IsShared(objPtr))
                objPtr = Jim_DuplicateObj(interp, objPtr);

            /* Just cheat here and append as a list and convert to a dict */
            Jim_ListAppendList(interp, objPtr, listObj);
            Jim_DictSize(interp, objPtr);
            Jim_InvalidateStringRep(objPtr);

            Jim_FreeNewObj(interp, listObj);
            listObj = objPtr;
        }
        Jim_SetVariable(interp, varName, listObj);
    }

    /* And also return the value */
    Jim_SetResult(interp, listObj);

    return JIM_OK;
}

开发者ID:BitThunder，项目名称:bitthunder，代码行数:48，代码来源:jim-file.c

示例5: Win32ErrorObj

static Jim_Obj *
Win32ErrorObj(Jim_Interp *interp, const char * szPrefix, DWORD dwError)
{
    Jim_Obj *msgObj = NULL;
    char * lpBuffer = NULL;
    DWORD  dwLen = 0;

    dwLen = FormatMessageA(FORMAT_MESSAGE_ALLOCATE_BUFFER
        | FORMAT_MESSAGE_FROM_SYSTEM, NULL, dwError, LANG_NEUTRAL,
        (char *)&lpBuffer, 0, NULL);
    if (dwLen < 1) {
        dwLen = FormatMessageA(FORMAT_MESSAGE_ALLOCATE_BUFFER
            | FORMAT_MESSAGE_FROM_STRING | FORMAT_MESSAGE_ARGUMENT_ARRAY,
            "code 0x%1!08X!%n", 0, LANG_NEUTRAL,
            (char *)&lpBuffer, 0, (va_list *)&dwError);
    }

    msgObj = Jim_NewStringObj(interp, szPrefix, -1);
    if (dwLen > 0) {
        char *p = lpBuffer + dwLen - 1;        /* remove cr-lf at end */
        for ( ; p && *p && isspace(UCHAR(*p)); p--)
            ;
        *++p = 0;
        Jim_AppendString(interp, msgObj, ": ", 2);
        Jim_AppendString(interp, msgObj, lpBuffer, -1);
    }
    LocalFree((HLOCAL)lpBuffer);
    return msgObj;
}

开发者ID:hummypkg，项目名称:jimtcl，代码行数:29，代码来源:jim-win32.c

示例6: ioutil_Jim_Command_ls

static int ioutil_Jim_Command_ls(Jim_Interp *interp,
	int argc,
	Jim_Obj * const *argv)
{
	if (argc != 2) {
		Jim_WrongNumArgs(interp, 1, argv, "ls ?dir?");
		return JIM_ERR;
	}

	const char *name = Jim_GetString(argv[1], NULL);

	DIR *dirp = NULL;
	dirp = opendir(name);
	if (dirp == NULL)
		return JIM_ERR;
	Jim_Obj *objPtr = Jim_NewListObj(interp, NULL, 0);

	for (;; ) {
		struct dirent *entry = NULL;
		entry = readdir(dirp);
		if (entry == NULL)
			break;

		if ((strcmp(".", entry->d_name) == 0) || (strcmp("..", entry->d_name) == 0))
			continue;

		Jim_ListAppendElement(interp, objPtr,
			Jim_NewStringObj(interp, entry->d_name, strlen(entry->d_name)));
	}
	closedir(dirp);

	Jim_SetResult(interp, objPtr);

	return JIM_OK;
}

开发者ID:01org，项目名称:CODK-A-Flashpack，代码行数:35，代码来源:ioutil.c

示例7: Win32_AnimateWindow

static int
Win32_AnimateWindow(Jim_Interp *interp, int objc, Jim_Obj *const objv[])
{
    HWND hwnd;
    DWORD dwTime = 0, dwFlags = 0;
    struct map_t { const char* s; DWORD f; };
    
    if (objc != 4) {
        Jim_WrongNumArgs(interp, 1, objv, "windowhandle time flags");
        return JIM_ERR;
    }

    if (Jim_GetLong(interp, objv[1], (long *)&hwnd) != JIM_OK)
        return JIM_ERR;
    if (Jim_GetLong(interp, objv[2], &dwTime) != JIM_OK)
        return JIM_ERR;
    if (GetAnimateWindowFlagsFromObj(interp, objv[3], &dwFlags) != JIM_OK)
        return JIM_ERR;

    if (!AnimateWindow(hwnd, dwTime, dwFlags)) {
        DWORD err = GetLastError();
        Jim_Obj *errObj;
        if (err == ERROR_SUCCESS)
            errObj = Jim_NewStringObj(interp, "error: "
                " calling thread does not own the window", -1);
        else
            errObj = Win32ErrorObj(interp, "AnimateWindow", err);
        Jim_SetResult(interp, errObj);
        return JIM_ERR;
    }
    return JIM_OK;
}

开发者ID:alepharchives，项目名称:Jim，代码行数:32，代码来源:jim-win32.c

示例8: Win32_GetModuleFileName

static int
Win32_GetModuleFileName(Jim_Interp *interp, int objc, Jim_Obj * const *objv)
{
    HMODULE hModule = NULL;
    char path[MAX_PATH];
    DWORD len = 0;

    if (objc > 2) {
        Jim_WrongNumArgs(interp, 1, objv, "?moduleid?");
        return JIM_ERR;
    }

    if (objc == 2) {
        if (Jim_GetLong(interp, objv[1], (long *)&hModule) != JIM_OK) {
            return JIM_ERR;
        }
    }

    len = GetModuleFileNameA(hModule, path, MAX_PATH);
    if (len != 0) {
        Jim_Obj *pathObj = Jim_NewStringObj(interp, path, len);
        Jim_SetResult(interp, pathObj);
    } else {
        Jim_SetResult(interp,
            Win32ErrorObj(interp, "GetModuleFileName", GetLastError()));
        return JIM_ERR;
    }

    return JIM_OK;
}

开发者ID:hummypkg，项目名称:jimtcl，代码行数:30，代码来源:jim-win32.c

示例9: JimMakeChannel

/**
 * Creates a channel for fh/fd/filename.
 *
 * If fh is not NULL, uses that as the channel (and set AIO_KEEPOPEN).
 * Otherwise, if fd is >= 0, uses that as the chanel.
 * Otherwise opens 'filename' with mode 'mode'.
 *
 * hdlfmt is a sprintf format for the filehandle. Anything with %ld at the end will do.
 * mode is used for open or fdopen.
 *
 * Creates the command and sets the name as the current result.
 */
static int JimMakeChannel(Jim_Interp *interp, FILE *fh, int fd, Jim_Obj *filename,
    const char *hdlfmt, int family, const char *mode)
{
    AioFile *af;
    char buf[AIO_CMD_LEN];
    int OpenFlags = 0;

    if (filename == NULL) {
        filename = Jim_NewStringObj(interp, hdlfmt, -1);
    }

    Jim_IncrRefCount(filename);

    if (fh == NULL) {
        if (fd < 0) {
            fh = fopen(Jim_String(filename), mode);
        }
        else {
            fh = fdopen(fd, mode);
        }
    }
    else {
        OpenFlags = AIO_KEEPOPEN;
    }

    if (fh == NULL) {
        JimAioSetError(interp, filename);
#if !defined(JIM_ANSIC)
        if (fd >= 0) {
            close(fd);
        }
#endif
        Jim_DecrRefCount(interp, filename);
        return JIM_ERR;
    }

    /* Create the file command */
    af = Jim_Alloc(sizeof(*af));
    memset(af, 0, sizeof(*af));
    af->fp = fh;
    af->fd = fileno(fh);
    af->filename = filename;
#ifdef FD_CLOEXEC
    if ((OpenFlags & AIO_KEEPOPEN) == 0) {
        fcntl(af->fd, F_SETFD, FD_CLOEXEC);
    }
#endif
    af->OpenFlags = OpenFlags;
#ifdef O_NDELAY
    af->flags = fcntl(af->fd, F_GETFL);
#endif
    af->addr_family = family;
    snprintf(buf, sizeof(buf), hdlfmt, Jim_GetId(interp));
    Jim_CreateCommand(interp, buf, JimAioSubCmdProc, af, JimAioDelProc);

    Jim_SetResultString(interp, buf, -1);

    return JIM_OK;
}

开发者ID:alex-shpilkin，项目名称:jimtcl，代码行数:71，代码来源:jim-aio.c

示例10: Jim_MakeTempFile

int Jim_MakeTempFile(Jim_Interp *interp, const char *filename_template, int unlink_file)
{
    int fd;
    mode_t mask;
    Jim_Obj *filenameObj;

    if (filename_template == NULL) {
        const char *tmpdir = getenv("TMPDIR");
        if (tmpdir == NULL || *tmpdir == '\0' || access(tmpdir, W_OK) != 0) {
            tmpdir = "/tmp/";
        }
        filenameObj = Jim_NewStringObj(interp, tmpdir, -1);
        if (tmpdir[0] && tmpdir[strlen(tmpdir) - 1] != '/') {
            Jim_AppendString(interp, filenameObj, "/", 1);
        }
        Jim_AppendString(interp, filenameObj, "tcl.tmp.XXXXXX", -1);
    }
    else {
        filenameObj = Jim_NewStringObj(interp, filename_template, -1);
    }

    /* Update the template name directly with the filename */
    mask = umask(S_IXUSR | S_IRWXG | S_IRWXO);
#ifdef HAVE_MKSTEMP
    fd = mkstemp(filenameObj->bytes);
#else
    if (mktemp(filenameObj->bytes) == NULL) {
        fd = -1;
    }
    else {
        fd = open(filenameObj->bytes, O_RDWR | O_CREAT | O_TRUNC);
    }
#endif
    umask(mask);
    if (fd < 0) {
        Jim_SetResultErrno(interp, Jim_String(filenameObj));
        Jim_FreeNewObj(interp, filenameObj);
        return -1;
    }
    if (unlink_file) {
        remove(Jim_String(filenameObj));
    }

    Jim_SetResult(interp, filenameObj);
    return fd;
}

开发者ID:msteveb，项目名称:jimtcl，代码行数:46，代码来源:jimiocompat.c

示例11: JimCheckWaitStatus

/*
 * Create error messages for unusual process exits.  An
 * extra newline gets appended to each error message, but
 * it gets removed below (in the same fashion that an
 * extra newline in the command's output is removed).
 */
static int JimCheckWaitStatus(Jim_Interp *interp, pidtype pid, int waitStatus)
{
    Jim_Obj *errorCode = Jim_NewListObj(interp, NULL, 0);
    int rc = JIM_ERR;

    if (WIFEXITED(waitStatus)) {
        if (WEXITSTATUS(waitStatus) == 0) {
            Jim_ListAppendElement(interp, errorCode, Jim_NewStringObj(interp, "NONE", -1));
            rc = JIM_OK;
        }
        else {
            Jim_ListAppendElement(interp, errorCode, Jim_NewStringObj(interp, "CHILDSTATUS", -1));
            Jim_ListAppendElement(interp, errorCode, Jim_NewIntObj(interp, (long)pid));
            Jim_ListAppendElement(interp, errorCode, Jim_NewIntObj(interp, WEXITSTATUS(waitStatus)));
        }
    }
    else {
        const char *type;
        const char *action;

        if (WIFSIGNALED(waitStatus)) {
            type = "CHILDKILLED";
            action = "killed";
        }
        else {
            type = "CHILDSUSP";
            action = "suspended";
        }

        Jim_ListAppendElement(interp, errorCode, Jim_NewStringObj(interp, type, -1));

#ifdef jim_ext_signal
        Jim_SetResultFormatted(interp, "child %s by signal %s", action, Jim_SignalId(WTERMSIG(waitStatus)));
        Jim_ListAppendElement(interp, errorCode, Jim_NewStringObj(interp, Jim_SignalId(WTERMSIG(waitStatus)), -1));
        Jim_ListAppendElement(interp, errorCode, Jim_NewIntObj(interp, pid));
        Jim_ListAppendElement(interp, errorCode, Jim_NewStringObj(interp, Jim_SignalName(WTERMSIG(waitStatus)), -1));
#else
        Jim_SetResultFormatted(interp, "child %s by signal %d", action, WTERMSIG(waitStatus));
        Jim_ListAppendElement(interp, errorCode, Jim_NewIntObj(interp, WTERMSIG(waitStatus)));
        Jim_ListAppendElement(interp, errorCode, Jim_NewIntObj(interp, (long)pid));
        Jim_ListAppendElement(interp, errorCode, Jim_NewIntObj(interp, WTERMSIG(waitStatus)));
#endif
    }
    Jim_SetGlobalVariableStr(interp, "errorCode", errorCode);
    return rc;
}

开发者ID:dokterp，项目名称:jimtcl，代码行数:52，代码来源:jim-exec.c

示例12: Jim_GetString

/* Everything passing between interpreters must be converted to a string */
static Jim_Obj *JimInterpCopyObj(Jim_Interp *target, Jim_Obj *obj)
{
    const char *rep;
    int len;

    rep = Jim_GetString(obj, &len);
    return Jim_NewStringObj(target, rep, len);
}

开发者ID:evanhunter，项目名称:jimtcl，代码行数:9，代码来源:jim-interp.c

示例13: zylinjtag_Jim_Command_ip

/* not so pretty code to fish out ip number*/
static int zylinjtag_Jim_Command_ip(Jim_Interp *interp, int argc,
		Jim_Obj * const *argv)
{
#if !defined(__CYGWIN__)
	Jim_Obj *tclOutput = Jim_NewStringObj(interp, "", 0);

	struct ifaddrs *ifa = NULL, *ifp = NULL;

	if (getifaddrs(&ifp) < 0)
	{
		return JIM_ERR;
	}

	for (ifa = ifp; ifa; ifa = ifa->ifa_next)
	{
		char ip[200];
		socklen_t salen;

		if (ifa->ifa_addr->sa_family == AF_INET)
			salen = sizeof(struct sockaddr_in);
		else if (ifa->ifa_addr->sa_family == AF_INET6)
			salen = sizeof(struct sockaddr_in6);
		else
			continue;

		if (getnameinfo(ifa->ifa_addr, salen, ip, sizeof(ip), NULL, 0,
				NI_NUMERICHOST) < 0)
		{
			continue;
		}

		Jim_AppendString(interp, tclOutput, ip, strlen(ip));
		break;

	}

	freeifaddrs(ifp);
#else
	Jim_Obj *tclOutput = Jim_NewStringObj(interp, "fixme!!!", 0);
	LOG_ERROR("NOT IMPLEMENTED!!!");
#endif
	Jim_SetResult(interp, tclOutput);

	return JIM_OK;
}

开发者ID:unnamet，项目名称:estick-jtag，代码行数:46，代码来源:ioutil.c

示例14: Jim_EvalEnsemble

/* XXX: Temporary */
static int Jim_EvalEnsemble(Jim_Interp *interp, const char *basecmd, const char *subcmd, int argc, Jim_Obj *const *argv)
{
    Jim_Obj *prefixObj = Jim_NewStringObj(interp, basecmd, -1);

    Jim_AppendString(interp, prefixObj, " ", 1);
    Jim_AppendString(interp, prefixObj, subcmd, -1);

    return Jim_EvalObjPrefix(interp, prefixObj, argc, argv);
}

开发者ID:JimmyDurandWesolowski，项目名称:openocd，代码行数:10，代码来源:jim-namespace.c

示例15: ioutil_Jim_Command_mac

/* not so pretty code to fish out eth0 mac address */
static int ioutil_Jim_Command_mac(Jim_Interp *interp, int argc,
	Jim_Obj *const *argv)
{
	struct ifreq *ifr, *ifend;
	struct ifreq ifreq;
	struct ifconf ifc;
	struct ifreq ifs[5];
	int SockFD;

	SockFD = socket(AF_INET, SOCK_DGRAM, 0);
	if (SockFD < 0)
		return JIM_ERR;

	ifc.ifc_len = sizeof(ifs);
	ifc.ifc_req = ifs;
	if (ioctl(SockFD, SIOCGIFCONF, &ifc) < 0) {
		close(SockFD);
		return JIM_ERR;
	}

	ifend = ifs + (ifc.ifc_len / sizeof(struct ifreq));
	for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
		/* if (ifr->ifr_addr.sa_family == AF_INET) */
		{
			if (strcmp("eth0", ifr->ifr_name) != 0)
				continue;
			strncpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
			if (ioctl(SockFD, SIOCGIFHWADDR, &ifreq) < 0) {
				close(SockFD);
				return JIM_ERR;
			}

			close(SockFD);

			Jim_Obj *tclOutput = Jim_NewStringObj(interp, "", 0);

			char buffer[256];
			sprintf(buffer, "%02x-%02x-%02x-%02x-%02x-%02x",
				ifreq.ifr_hwaddr.sa_data[0]&0xff,
				ifreq.ifr_hwaddr.sa_data[1]&0xff,
				ifreq.ifr_hwaddr.sa_data[2]&0xff,
				ifreq.ifr_hwaddr.sa_data[3]&0xff,
				ifreq.ifr_hwaddr.sa_data[4]&0xff,
				ifreq.ifr_hwaddr.sa_data[5]&0xff);

			Jim_AppendString(interp, tclOutput, buffer, strlen(buffer));

			Jim_SetResult(interp, tclOutput);

			return JIM_OK;
		}
	}
	close(SockFD);

	return JIM_ERR;

}

开发者ID:01org，项目名称:CODK-A-Flashpack，代码行数:58，代码来源:ioutil.c

示例16: JimInterpCopyVariable

static void JimInterpCopyVariable(Jim_Interp *target, Jim_Interp *source, const char *var, const char *default_value)
{
    Jim_Obj *value = Jim_GetGlobalVariableStr(source, var, JIM_NONE);
    const char *str;

    str = value ? Jim_String(value) : default_value;
    if (str) {
        Jim_SetGlobalVariableStr(target, var, Jim_NewStringObj(target, str, -1));
    }
}

开发者ID:evanhunter，项目名称:jimtcl，代码行数:10，代码来源:jim-interp.c

示例17: Jim_PosixGetidsCommand

static int Jim_PosixGetidsCommand(Jim_Interp *interp, int argc,
        Jim_Obj *const *argv)
{
    Jim_Obj *objv[8];
    if (argc != 1) {
        Jim_WrongNumArgs(interp, 1, argv, "");
        return JIM_ERR;
    }
    objv[0] = Jim_NewStringObj(interp, "uid", -1);
    objv[1] = Jim_NewIntObj(interp, getuid());
    objv[2] = Jim_NewStringObj(interp, "euid", -1);
    objv[3] = Jim_NewIntObj(interp, geteuid());
    objv[4] = Jim_NewStringObj(interp, "gid", -1);
    objv[5] = Jim_NewIntObj(interp, getgid());
    objv[6] = Jim_NewStringObj(interp, "egid", -1);
    objv[7] = Jim_NewIntObj(interp, getegid());
    Jim_SetResult(interp, Jim_NewListObj(interp, objv, 8));
    return JIM_OK;
}

开发者ID:alepharchives，项目名称:Jim，代码行数:19，代码来源:jim-posix.c

示例18: aio_cmd_gets

static int aio_cmd_gets(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
    AioFile *af = Jim_CmdPrivData(interp);
    char buf[AIO_BUF_LEN];
    Jim_Obj *objPtr;
    int len;

    errno = 0;

    objPtr = Jim_NewStringObj(interp, NULL, 0);
    while (1) {
        buf[AIO_BUF_LEN - 1] = '_';
        if (fgets(buf, AIO_BUF_LEN, af->fp) == NULL)
            break;

        if (buf[AIO_BUF_LEN - 1] == '\0' && buf[AIO_BUF_LEN - 2] != '\n') {
            Jim_AppendString(interp, objPtr, buf, AIO_BUF_LEN - 1);
        }
        else {
            len = strlen(buf);

            if (len && (buf[len - 1] == '\n')) {
                /* strip "\n" */
                len--;
            }

            Jim_AppendString(interp, objPtr, buf, len);
            break;
        }
    }
    if (JimCheckStreamError(interp, af)) {
        /* I/O error */
        Jim_FreeNewObj(interp, objPtr);
        return JIM_ERR;
    }

    if (argc) {
        if (Jim_SetVariable(interp, argv[0], objPtr) != JIM_OK) {
            Jim_FreeNewObj(interp, objPtr);
            return JIM_ERR;
        }

        len = Jim_Length(objPtr);

        if (len == 0 && feof(af->fp)) {
            /* On EOF returns -1 if varName was specified */
            len = -1;
        }
        Jim_SetResultInt(interp, len);
    }
    else {
        Jim_SetResult(interp, objPtr);
    }
    return JIM_OK;
}

开发者ID:alex-shpilkin，项目名称:jimtcl，代码行数:55，代码来源:jim-aio.c

示例19: Jim_String

Jim_Obj *Jim_NamespaceTail(Jim_Interp *interp, Jim_Obj *ns)
{
    const char *name = Jim_String(ns);
    const char *pt = strrchr(name, ':');
    if (pt && pt != name && pt[-1] == ':') {
        return Jim_NewStringObj(interp, pt + 1, -1);
    }
    else {
        return ns;
    }
}

开发者ID:JimmyDurandWesolowski，项目名称:openocd，代码行数:11，代码来源:jim-namespace.c

示例20: jim_stacktrace_command

static int jim_stacktrace_command(Jim_Interp *interp, int argc,
		Jim_Obj * const *argv)
{
	if (argc != 1)
	{
		return JIM_ERR;
	}
	Jim_Obj * stacktrace = Jim_DuplicateObj(interp, interp->stackTrace);
	
	/* insert actual error site at beginning of list*/
	Jim_Obj *procname = Jim_NewStringObj(interp, "", -1); /* Uhhh... don't know this one. */
	Jim_ListInsertElements(interp, stacktrace, 0, 1, &procname);
	Jim_Obj *filename = Jim_NewStringObj(interp, interp->errorFileName, -1);
	Jim_ListInsertElements(interp, stacktrace, 1, 1, &filename);
	Jim_Obj *line = Jim_NewIntObj(interp, interp->errorLine);
	Jim_ListInsertElements(interp, stacktrace, 2, 1, &line);

	Jim_SetResult(interp, stacktrace);

	return JIM_OK;
}

开发者ID:Erguotou，项目名称:openocd-libswd，代码行数:21，代码来源:openocd.c

注：本文中的Jim_NewStringObj函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ Jim_SetResult函数代码示例发布时间：2022-05-30

C++ Jim_GetString函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18245|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9668|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8454|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9383|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8426|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7858|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ Jim_NewStringObj函数代码示例

示例1: JimAioOpenCommand

示例2: Jim_PosixWaitCommand

示例3: Win32_GetSystemInfo

示例4: StoreStatData

示例5: Win32ErrorObj

示例6: ioutil_Jim_Command_ls

示例7: Win32_AnimateWindow

示例8: Win32_GetModuleFileName

示例9: JimMakeChannel

示例10: Jim_MakeTempFile

示例11: JimCheckWaitStatus

示例12: Jim_GetString

示例13: zylinjtag_Jim_Command_ip

示例14: Jim_EvalEnsemble

示例15: ioutil_Jim_Command_mac

示例16: JimInterpCopyVariable

示例17: Jim_PosixGetidsCommand

示例18: aio_cmd_gets

示例19: Jim_String

示例20: jim_stacktrace_command

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-30083

theindianappguy/machine_learning_flutter

samaxes/minify-maven-plugin: Combine and

挨打的读音是什么？是āi dǎ还是ái dǎ？

nacika-ins/nanachibot: nanachibot is Rus

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053