C++ LCD_CHECK_RET函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中LCD_CHECK_RET函数的典型用法代码示例。如果您正苦于以下问题：C++ LCD_CHECK_RET函数的具体用法？C++ LCD_CHECK_RET怎么用？C++ LCD_CHECK_RET使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了LCD_CHECK_RET函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: DISP_UpdateScreen

DISP_STATUS DISP_UpdateScreen(UINT32 x, UINT32 y, UINT32 width, UINT32 height)
{

    LCD_CHECK_RET(LCD_WaitForNotBusy());

    if ((lcm_drv->update) &&
	   ((lcm_params->type==LCM_TYPE_DBI) || ((lcm_params->type==LCM_TYPE_DSI) && (lcm_params->dsi.mode==CMD_MODE))))
		{
        lcm_drv->update(x, y, width, height);
    }	

    LCD_CHECK_RET(LCD_SetRoiWindow(x, y, width, height));
    LCD_CHECK_RET(LCD_FBSetStartCoord(x, y));

    LCD_CHECK_RET(LCD_StartTransfer(FALSE));

	if (lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode==CMD_MODE) {
		DSI_clk_HS_mode(1);
		DSI_CHECK_RET(DSI_EnableClk());
	}
	else if (lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode!=CMD_MODE) {
		DSI_clk_HS_mode(1);
		DPI_CHECK_RET(DPI_EnableClk());
		DSI_CHECK_RET(DSI_EnableClk());
	}
	
    return DISP_STATUS_OK;
}

开发者ID:kuailexs，项目名称:iq451_mt6589，代码行数:28，代码来源:mt65xx_disp_drv.c

示例2: layer_debug_read

static ssize_t layer_debug_read(struct file *file,
                          char __user *ubuf, size_t count, loff_t *ppos)
{
    int ret;
    MTKFB_LAYER_DBG_OPTIONS *dbgopt = (MTKFB_LAYER_DBG_OPTIONS *)file->private_data;
    UINT32 aligned_buffer;

    if(dbgopt->working_buf == 0)
    {
        DISP_LOG_PRINT(ANDROID_LOG_INFO, "DBG", "No working buffer is available \n");
        return 0;
    }
    
    ///if LCD layer is enabled 
    if(!LCD_IsLayerEnable(dbgopt->layer_index))
    {
        DISP_LOG_PRINT(ANDROID_LOG_INFO, "DBG", "The layer %d is not enabled \n", dbgopt->layer_index);
        return 0;
    }

    aligned_buffer = (dbgopt->working_buf + 32) & 0xFFFFFFC0;
    if(*ppos == 0)
    {
        extern struct semaphore sem_flipping;
        extern struct semaphore sem_early_suspend;
        extern struct semaphore sem_update_screen;
        extern BOOL is_early_suspended;
        
        ret = down_interruptible(&sem_flipping);
        ret = down_interruptible(&sem_early_suspend);
        if (is_early_suspended) {
              up(&sem_early_suspend);
              up(&sem_flipping);
              return 0;
        }
        ret = down_interruptible(&sem_update_screen);

        DISP_LOG_PRINT(ANDROID_LOG_INFO, "DBG", "This is layer %d capturing \n", dbgopt->layer_index);
        DISP_LOG_PRINT(ANDROID_LOG_INFO, "DBG", "This layer width:%d , height:%d\n", LCD_REG->LAYER[dbgopt->layer_index].SIZE.WIDTH, LCD_REG->LAYER[dbgopt->layer_index].SIZE.HEIGHT);

        if(lcm_params->type == LCM_TYPE_DSI && lcm_params->dsi.mode == CMD_MODE)
        {
            DSI_CHECK_RET(DSI_WaitForNotBusy());
            LCD_CHECK_RET(LCD_EnableDCtoDsi(FALSE));
        }

        LCD_Capture_Layerbuffer(dbgopt->layer_index,aligned_buffer,16);
        
        if(lcm_params->type == LCM_TYPE_DSI && lcm_params->dsi.mode == CMD_MODE)
        {
            LCD_CHECK_RET(LCD_EnableDCtoDsi(TRUE));
        }

        up(&sem_update_screen);
        up(&sem_early_suspend);
        up(&sem_flipping);    
    }
    
    return simple_read_from_buffer(ubuf, count, ppos, (void *)aligned_buffer, DISP_GetScreenWidth()*DISP_GetScreenHeight()*2);
}

开发者ID:Banjo0917，项目名称:mt6577_kernel3.4，代码行数:60，代码来源:debug.c

示例3: dsi_capture_framebuffer

// protected by sem_early_suspend
DISP_STATUS dsi_capture_framebuffer(UINT32 pvbuf, UINT32 bpp)
{
    DSI_CHECK_RET(DSI_WaitForNotBusy());

    DDMS_capturing=1;

    if(lcm_params->dsi.mode == CMD_MODE)
    {
        LCD_CHECK_RET(LCD_EnableDCtoDsi(FALSE));

        LCD_CHECK_RET(LCD_Capture_Framebuffer(pvbuf, bpp));
    }
    else
    {
        DPI_CHECK_RET(DPI_Capture_Framebuffer(pvbuf, bpp));
    }


    if(lcm_params->dsi.mode == CMD_MODE)
    {
        LCD_CHECK_RET(LCD_EnableDCtoDsi(TRUE));
    }

    DDMS_capturing=0;

    return DISP_STATUS_OK;
}

开发者ID:ramgar，项目名称:mt6577_kernel_3.4.67，代码行数:28，代码来源:disp_drv_dsi.c

示例4: dsi_capture_framebuffer

// protected by sem_early_suspend
DISP_STATUS dsi_capture_framebuffer(UINT32 pvbuf, UINT32 bpp)
{
    DSI_CHECK_RET(DSI_WaitForNotBusy());
    
    DDMS_capturing=1;
    
    if(lcm_params->dsi.mode == CMD_MODE)
    {
        LCD_CHECK_RET(LCD_EnableDCtoDsi(FALSE));
        #ifndef MT65XX_NEW_DISP
            LCD_CHECK_RET(LCD_Capture_Framebuffer(pvbuf, bpp));
        #else
            DSI_CHECK_RET(DSI_Capture_Framebuffer(pvbuf, bpp, true));//cmd mode
        #endif
    }
    else
    {
        #ifndef MT65XX_NEW_DISP
            DPI_CHECK_RET(DPI_Capture_Framebuffer(pvbuf, bpp));
        #else
            DSI_CHECK_RET(DSI_Capture_Framebuffer(pvbuf, bpp, false));//video mode
        #endif
    }
    
    
    if(lcm_params->dsi.mode == CMD_MODE)
    {
        LCD_CHECK_RET(LCD_EnableDCtoDsi(TRUE));
    }
    
    DDMS_capturing=0;
    
    return DISP_STATUS_OK;	
}

开发者ID:htc183，项目名称:android_kernel_mtk_mt6572，代码行数:35，代码来源:disp_drv_dsi.c

示例5: mt65xx_disp_get_lcd_time

UINT32 mt65xx_disp_get_lcd_time(void)
{
#if 0
	UINT32 time0, time1, lcd_time;
	mt65xx_disp_update(0, 0, CFG_DISPLAY_WIDTH, CFG_DISPLAY_HEIGHT);

    LCD_CHECK_RET(LCD_WaitForNotBusy());

	time0 = gpt4_tick2time_us(gpt4_get_current_tick());
    LCD_CHECK_RET(LCD_StartTransfer(FALSE));

	if (lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode==CMD_MODE) {
		DSI_clk_HS_mode(1);
		DSI_CHECK_RET(DSI_EnableClk());
	}
	else if (lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode!=CMD_MODE) {
		DSI_clk_HS_mode(1);
		DPI_CHECK_RET(DPI_EnableClk());
		DSI_CHECK_RET(DSI_EnableClk());
	}
    LCD_CHECK_RET(LCD_WaitForNotBusy());

	time1 = gpt4_tick2time_us(gpt4_get_current_tick());

	lcd_time = time1 - time0;
	printf("lcd one %d \n", lcd_time);
	if(0 != lcd_time)	
		return (100000000/lcd_time);
	else
#endif
		return (6000);
}

开发者ID:kuailexs，项目名称:iq451_mt6589，代码行数:32，代码来源:mt65xx_disp_drv.c

示例6: disp_drv_init_ctrl_if

static void disp_drv_init_ctrl_if(void)
{
    const LCM_DBI_PARAMS *dbi = &(lcm_params->dbi);

	if(lcm_params == NULL)
		return;

    switch(lcm_params->ctrl)
    {
    case LCM_CTRL_NONE :
    case LCM_CTRL_GPIO : return;

    case LCM_CTRL_SERIAL_DBI :
        ASSERT(dbi->port <= 1);
        ctrl_if = LCD_IF_SERIAL_0 + dbi->port;
        LCD_ConfigSerialIF(ctrl_if,
									 (LCD_IF_SERIAL_BITS)dbi->data_width,
									 dbi->serial.sif_3wire,
									 dbi->serial.sif_sdi,
									 dbi->serial.sif_1st_pol,
									 dbi->serial.sif_sck_def,
									 dbi->serial.sif_div2,
									 dbi->serial.sif_hw_cs,
									 dbi->serial.css,
									 dbi->serial.csh,
									 dbi->serial.rd_1st,
									 dbi->serial.rd_2nd,
									 dbi->serial.wr_1st,
									 dbi->serial.wr_2nd);

        break;
        
    case LCM_CTRL_PARALLEL_DBI :
        ASSERT(dbi->port <= 2);
        ctrl_if = LCD_IF_PARALLEL_0 + dbi->port;
        LCD_ConfigParallelIF(ctrl_if,
                             (LCD_IF_PARALLEL_BITS)dbi->data_width,
                             (LCD_IF_PARALLEL_CLK_DIV)dbi->clock_freq,
                             dbi->parallel.write_setup,
                             dbi->parallel.write_hold,
                             dbi->parallel.write_wait,
                             dbi->parallel.read_setup,
							 dbi->parallel.read_hold,
                             dbi->parallel.read_latency,
                             dbi->parallel.wait_period,
							 dbi->parallel.cs_high_width);
        break;

    default : ASSERT(0);
    }

    LCD_CHECK_RET(LCD_SelectWriteIF(ctrl_if));

    LCD_CHECK_RET(LCD_ConfigIfFormat(dbi->data_format.color_order,
                                     dbi->data_format.trans_seq,
                                     dbi->data_format.padding,
                                     dbi->data_format.format,
                                     to_lcd_if_width(dbi->data_format.width)));
}

开发者ID:kuailexs，项目名称:iq451_mt6589，代码行数:59，代码来源:mt65xx_disp_drv.c

示例7: dbi_enable_power

static DISP_STATUS dbi_enable_power(BOOL enable)
{
	if (enable) {
		LCD_CHECK_RET(LCD_PowerOn());
		init_io_pad();
	} else {
		LCD_CHECK_RET(LCD_PowerOff());
	}
	return DISP_STATUS_OK;
}

开发者ID:vitek999，项目名称:android_kernel_lg_mm，代码行数:10，代码来源:disp_drv_dbi.c

示例8: DISP_DisableDirectLinkMode

DISP_STATUS DISP_DisableDirectLinkMode(UINT32 layer)
{
    if (layer == direct_link_layer) {
        LCD_CHECK_RET(LCD_EnableHwTrigger(FALSE));
        direct_link_layer = -1;
    }
    LCD_CHECK_RET(LCD_LayerSetTriggerMode(layer, LCD_SW_TRIGGER));

    return DISP_STATUS_OK;
}

开发者ID:kuailexs，项目名称:iq451_mt6589，代码行数:10，代码来源:mt65xx_disp_drv.c

示例9: dpi_update_screen

static DISP_STATUS dpi_update_screen(void)
{
#ifndef MT65XX_NEW_DISP
    LCD_CHECK_RET(LCD_StartTransfer(FALSE));
#else
	disp_path_get_mutex();
	LCD_CHECK_RET(LCD_ConfigOVL());
	disp_path_release_mutex();
#endif
    return DISP_STATUS_OK;
}

开发者ID:SiddheshK15，项目名称:WR2-Kernel，代码行数:11，代码来源:disp_drv_dpi.c

示例10: DISP_EnableDirectLinkMode

DISP_STATUS DISP_EnableDirectLinkMode(UINT32 layer)
{
    if (layer != direct_link_layer) {
        LCD_CHECK_RET(LCD_LayerSetTriggerMode(layer, LCD_HW_TRIGGER_DIRECT_COUPLE));
        LCD_CHECK_RET(LCD_LayerSetHwTriggerSrc(layer, LCD_HW_TRIGGER_SRC_IBW2));
        LCD_CHECK_RET(LCD_EnableHwTrigger(TRUE));
        LCD_CHECK_RET(LCD_StartTransfer(FALSE));
        direct_link_layer = layer;
    }

    return DISP_STATUS_OK;
}

开发者ID:kuailexs，项目名称:iq451_mt6589，代码行数:12，代码来源:mt65xx_disp_drv.c

示例11: dpi_update_screen

static DISP_STATUS dpi_update_screen(BOOL isMuextLocked)
{
#ifndef MT65XX_NEW_DISP
    LCD_CHECK_RET(LCD_StartTransfer(FALSE, isMuextLocked));
#else
    if (!isMuextLocked)
        disp_path_get_mutex();
    LCD_CHECK_RET(LCD_ConfigOVL());
    if (!isMuextLocked)
        disp_path_release_mutex();
#endif
    return DISP_STATUS_OK;
}

开发者ID:Lesozav25，项目名称:mtk_6572，代码行数:13，代码来源:disp_drv_dpi.c

示例12: DPI_StartTransfer

DPI_STATUS DPI_StartTransfer(bool isMutexLocked)
{
    // needStartDSI = 1: For command mode or the first time of video mode.
    // After the first time of video mode. Configuration is applied in ConfigurationUpdateTask.
    extern struct mutex OverlaySettingMutex;

    MMProfileLogMetaStringEx(MTKFB_MMP_Events.Debug, MMProfileFlagPulse, isMutexLocked, 0, "StartTransfer");

    if (!isMutexLocked)
        disp_path_get_mutex();

    mutex_lock(&OverlaySettingMutex);

    LCD_CHECK_RET(LCD_ConfigOVL());
    // Insert log for trigger point.
    DBG_OnTriggerLcd();

    // To trigger frame update.
    DPI_EnableClk();

    mutex_unlock(&OverlaySettingMutex);

    if (!isMutexLocked)
        disp_path_release_mutex();

    return DPI_STATUS_OK;
}

开发者ID:LosTigeros，项目名称:Trooper2_4.0_5.0_kernel，代码行数:27，代码来源:dpi_drv.c

示例13: dbi_update_screen

static DISP_STATUS dbi_update_screen(BOOL isMuextLocked)
{

	LCD_CHECK_RET(LCD_StartTransfer(FALSE, isMuextLocked));

	return DISP_STATUS_OK;
}

开发者ID:vitek999，项目名称:android_kernel_lg_mm，代码行数:7，代码来源:disp_drv_dbi.c

示例14: init_lcd

static void init_lcd(void)
{
	/* Config LCD Controller */

	LCD_CHECK_RET(LCD_LayerEnable(LCD_LAYER_ALL, FALSE));
	LCD_CHECK_RET(LCD_LayerSetTriggerMode(LCD_LAYER_ALL, LCD_SW_TRIGGER));
	LCD_CHECK_RET(LCD_EnableHwTrigger(FALSE));

	LCD_CHECK_RET(LCD_SetBackgroundColor(0));
	LCD_CHECK_RET(LCD_SetRoiWindow(0, 0, lcm_params->width, lcm_params->height));

	LCD_CHECK_RET(LCD_SetOutputMode(LCD_OUTPUT_TO_LCM));
	LCD_CHECK_RET(LCD_WaitDPIIndication(FALSE));
	LCD_CHECK_RET(LCD_FBEnable(LCD_FB_0, FALSE));
	LCD_CHECK_RET(LCD_FBEnable(LCD_FB_1, FALSE));
	LCD_CHECK_RET(LCD_FBEnable(LCD_FB_2, FALSE));
}

开发者ID:vitek999，项目名称:android_kernel_lg_mm，代码行数:17，代码来源:disp_drv_dbi.c

示例15: init_lcd_te_control

static void init_lcd_te_control(void)
{
    const LCM_DBI_PARAMS *dbi = &(lcm_params->dbi);

    LCD_CHECK_RET(LCD_TE_Enable(FALSE));
    if(!DISP_IsLcmFound())
        return;
#ifdef BUILD_UBOOT
    {
        extern BOOTMODE g_boot_mode;
        printf("boot_mode = %d\n",g_boot_mode);
        if(g_boot_mode == META_BOOT)
            return;
    }
#endif
    if (LCM_DBI_TE_MODE_DISABLED == dbi->te_mode) {
        LCD_CHECK_RET(LCD_TE_Enable(FALSE));
        return;
    }

    if (LCM_DBI_TE_MODE_VSYNC_ONLY == dbi->te_mode) {
        LCD_CHECK_RET(LCD_TE_SetMode(LCD_TE_MODE_VSYNC_ONLY));
    } else if (LCM_DBI_TE_MODE_VSYNC_OR_HSYNC == dbi->te_mode) {
        LCD_CHECK_RET(LCD_TE_SetMode(LCD_TE_MODE_VSYNC_OR_HSYNC));
        LCD_CHECK_RET(LCD_TE_ConfigVHSyncMode(dbi->te_hs_delay_cnt,
                                              dbi->te_vs_width_cnt,
                                              (LCD_TE_VS_WIDTH_CNT_DIV)dbi->te_vs_width_cnt_div));
    } else ASSERT(0);

    LCD_CHECK_RET(LCD_TE_SetEdgePolarity(dbi->te_edge_polarity));
    LCD_CHECK_RET(LCD_TE_Enable(TRUE));
}

开发者ID:ramgar，项目名称:mt6577_kernel_3.4.67，代码行数:32，代码来源:disp_drv_dsi.c

示例16: init_lcd_te_control

static void init_lcd_te_control(void)
{
	const LCM_DBI_PARAMS *dbi = &(lcm_params->dbi);

	/* The board may not connect to LCM in META test mode,
	   force disalbe TE to avoid blocked in LCD controller
	 */
	/* but for uboot, the boot mode selection is done after lcd init, so we have to disable te always in uboot. */
	LCD_CHECK_RET(LCD_TE_Enable(FALSE));
	if (!DISP_IsLcmFound())
		return;

	if (LCM_DBI_TE_MODE_DISABLED == dbi->te_mode) {
		LCD_CHECK_RET(LCD_TE_Enable(FALSE));
		return;
	}

	if (LCM_DBI_TE_MODE_VSYNC_ONLY == dbi->te_mode) {
		LCD_CHECK_RET(LCD_TE_SetMode(LCD_TE_MODE_VSYNC_ONLY));
	} else if (LCM_DBI_TE_MODE_VSYNC_OR_HSYNC == dbi->te_mode) {
		LCD_CHECK_RET(LCD_TE_SetMode(LCD_TE_MODE_VSYNC_OR_HSYNC));
		LCD_CHECK_RET(LCD_TE_ConfigVHSyncMode(dbi->te_hs_delay_cnt,
						      dbi->te_vs_width_cnt,
						      (LCD_TE_VS_WIDTH_CNT_DIV) dbi->te_vs_width_cnt_div));
	} else
		ASSERT(0);

	LCD_CHECK_RET(LCD_TE_SetEdgePolarity(dbi->te_edge_polarity));
	LCD_CHECK_RET(LCD_TE_Enable(TRUE));
}

开发者ID:vitek999，项目名称:android_kernel_lg_mm，代码行数:30，代码来源:disp_drv_dbi.c

示例17: dpi_enable_power

static DISP_STATUS dpi_enable_power(BOOL enable)
{
    if (enable) {
        DPI_CHECK_RET(DPI_PowerOn());

        init_mipi_pll();//for MT6573 and later chip, Must re-init mipi pll for dpi, because pll register have located in
		                //MMSYS1 except MT6516
        init_io_pad();
        LCD_CHECK_RET(LCD_PowerOn());
        DPI_CHECK_RET(DPI_EnableClk());
    } else {
        DPI_CHECK_RET(DPI_DisableClk());
        DPI_CHECK_RET(DPI_PowerOff());
        LCD_CHECK_RET(LCD_PowerOff());
        DPI_mipi_switch(false);
    }
    return DISP_STATUS_OK;
}

开发者ID:Banjo0917，项目名称:mt6577_kernel3.4，代码行数:18，代码来源:disp_drv_dpi.c

示例18: disphal_panel_enable

int disphal_panel_enable(const LCM_DRIVER *lcm_drv, struct mutex* pLcmCmdMutex, BOOL enable)
{
    if (enable)
    {
        if(lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode != CMD_MODE)
        {		
            DSI_SetMode(CMD_MODE);
        }
        mutex_lock(pLcmCmdMutex);
		//#ifdef MTK_DISP_CONFIG_SUPPORT
		if(get_fbconfig_start_lcm_config())
		{
		fbconfig_apply_new_lcm_setting();
		//do not call lcm_init if you have ever started LCM config until you reset lcm config ;
		}
		else
		//#endif
        lcm_drv->resume();

        mutex_unlock(pLcmCmdMutex);

        if(lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode != CMD_MODE)
        {
            //DSI_clk_HS_mode(1);
            DSI_WaitForNotBusy();
            DSI_SetMode(lcm_params->dsi.mode);
        }
    }
    else
    {
        LCD_CHECK_RET(LCD_WaitForNotBusy());
        if(lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode == CMD_MODE)
            DSI_CHECK_RET(DSI_WaitForNotBusy());

        if (lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode != CMD_MODE)
        {		
            DPI_CHECK_RET(DPI_DisableClk());
            //msleep(200);
            DSI_Reset();
            DSI_clk_HS_mode(0);
            DSI_SetMode(CMD_MODE);
        }

        mutex_lock(pLcmCmdMutex);
		//#ifdef MTK_DISP_CONFIG_SUPPORT
		if(get_fbconfig_start_lcm_config())
		{
		fbconfig_apply_new_lcm_setting();
		//do not call lcm_init if you have ever started LCM config until you reset lcm config ;
		}
		else
		//#endif
        lcm_drv->suspend();
        mutex_unlock(pLcmCmdMutex);
    }
    return 0;
}

开发者ID:degrus，项目名称:zopo_kernel，代码行数:57，代码来源:disp_hal.c

示例19: TVDVT_prepare_source

void TVDVT_prepare_source(unsigned int src_pa)
{
    //static char data = 0x10;
    //memset(src_buf_va, data++, BUFFER_SIZE);


    __cpuc_flush_user_all();
	outer_clean_all();
    LCD_CHECK_RET(LCD_LayerSetAddress(LCD_LAYER_0, src_pa));
}

开发者ID:beyondmtk，项目名称:MT6589_kernel_source，代码行数:10，代码来源:tvrot_dvt.c

示例20: DISP_SetInterruptCallback

DISP_STATUS DISP_SetInterruptCallback(DISP_INTERRUPT_EVENTS eventID, DISP_INTERRUPT_CALLBACK_STRUCT *pCBStruct)
{
    UINT32 offset;
    ASSERT(pCBStruct != NULL);

    if(eventID >= DISP_LCD_INTERRUPT_EVENTS_START && eventID <= DISP_LCD_INTERRUPT_EVENTS_END )
    {
        ///register callback
        offset = eventID - DISP_LCD_INTERRUPT_EVENTS_START;
        DISP_CallbackArray[offset].pFunc = pCBStruct->pFunc;
        DISP_CallbackArray[offset].pParam = pCBStruct->pParam;

        LCD_CHECK_RET(LCD_SetInterruptCallback(_DISP_InterruptCallbackProxy));
        LCD_CHECK_RET(LCD_EnableInterrupt(eventID));
    }
    else if(eventID >= DISP_DSI_INTERRUPT_EVENTS_START && eventID <= DISP_DSI_INTERRUPT_EVENTS_END )
    {
        ///register callback
        offset = eventID - DISP_DSI_INTERRUPT_EVENTS_START + DISP_LCD_INTERRUPT_EVENTS_NUMBER;
        DISP_CallbackArray[offset].pFunc = pCBStruct->pFunc;
        DISP_CallbackArray[offset].pParam = pCBStruct->pParam;

        DSI_CHECK_RET(DSI_SetInterruptCallback(_DISP_InterruptCallbackProxy));
        DSI_CHECK_RET(DSI_EnableInterrupt(eventID));
    }
    else if(eventID >= DISP_DPI_INTERRUPT_EVENTS_START && eventID <= DISP_DPI_INTERRUPT_EVENTS_END )
    {
        offset = eventID - DISP_DPI_INTERRUPT_EVENTS_START + DISP_LCD_INTERRUPT_EVENTS_NUMBER + DISP_DSI_INTERRUPT_EVENTS_NUMBER;
        DISP_CallbackArray[offset].pFunc = pCBStruct->pFunc;
        DISP_CallbackArray[offset].pParam = pCBStruct->pParam;

        DPI_CHECK_RET(DPI_SetInterruptCallback(_DISP_InterruptCallbackProxy));
        DPI_CHECK_RET(DPI_EnableInterrupt(eventID));
    }
    else
    {
        printk("Invalid event id: %d\n", eventID);
        ASSERT(0);
        return DISP_STATUS_ERROR;        ///TODO: error log
    }
    return DISP_STATUS_OK;
}

开发者ID:CobraJet93，项目名称:kernel-3.10.54，代码行数:42，代码来源:disp_intr.c

注：本文中的LCD_CHECK_RET函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ LCD_CS_HIGH函数代码示例发布时间：2022-05-30

C++ LCDUIASSERT函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18239|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9667|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8453|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9383|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8425|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7858|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ LCD_CHECK_RET函数代码示例

示例1: DISP_UpdateScreen

示例2: layer_debug_read

示例3: dsi_capture_framebuffer

示例4: dsi_capture_framebuffer

示例5: mt65xx_disp_get_lcd_time

示例6: disp_drv_init_ctrl_if

示例7: dbi_enable_power

示例8: DISP_DisableDirectLinkMode

示例9: dpi_update_screen

示例10: DISP_EnableDirectLinkMode

示例11: dpi_update_screen

示例12: DPI_StartTransfer

示例13: dbi_update_screen

示例14: init_lcd

示例15: init_lcd_te_control

示例16: init_lcd_te_control

示例17: dpi_enable_power

示例18: disphal_panel_enable

示例19: TVDVT_prepare_source

示例20: DISP_SetInterruptCallback

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

CVE-2022-36900

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053