C++ LCD_DEBUG函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中LCD_DEBUG函数的典型用法代码示例。如果您正苦于以下问题：C++ LCD_DEBUG函数的具体用法？C++ LCD_DEBUG怎么用？C++ LCD_DEBUG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了LCD_DEBUG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: hx8369b_config_auto_cabc

/***************************************************************
Function: hx8369b_config_auto_cabc
Description: Set CABC configuration
Parameters:
    struct msmfb_cabc_config cabc_cfg: CABC configuration struct
Return:
    0: success
***************************************************************/
static int hx8369b_config_auto_cabc(struct msmfb_cabc_config cabc_cfg,struct msm_fb_data_type *mfd)
{
	int ret = 0;

	switch(cabc_cfg.mode)
	{
		case CABC_MODE_UI:
			hx8369b_auto_cabc_set_table[1].reg=0x00001;
			break;
		case CABC_MODE_MOVING:
		case CABC_MODE_STILL:
			hx8369b_auto_cabc_set_table[1].reg=0x00003;
			break;
		default:
			LCD_DEBUG("%s: invalid cabc mode: %d\n", __func__, cabc_cfg.mode);
	        ret = -EINVAL;
			break;
	}
	if(likely(0 == ret))
	{
		process_mipi_table(mfd,&hx8369b_tx_buf,(struct sequence*)&hx8369b_auto_cabc_set_table,
			 ARRAY_SIZE(hx8369b_auto_cabc_set_table), lcd_panel_wvga);
	}

	LCD_DEBUG("%s: change cabc mode to %d\n",__func__,cabc_cfg.mode);
	return ret;
}

开发者ID:moddingg33k，项目名称:android_kernel_synopsis，代码行数:35，代码来源:mipi_hx8369b_video_wvga.c

示例2: mipi_cmd_nt35510_fwvga_init

static int __init mipi_cmd_nt35510_fwvga_init(void)
{
	int ret = 0;
	struct msm_panel_info *pinfo = NULL;
	lcd_panel_fwvga = get_lcd_panel_type();
	if (MIPI_CMD_NT35510_BOE_FWVGA != lcd_panel_fwvga )
	{
		return 0;
	}
	LCD_DEBUG("enter mipi_cmd_nt35510_fwvga_init \n");
	mipi_dsi_buf_alloc(&nt35510_fwvga_tx_buf, DSI_BUF_SIZE);
	mipi_dsi_buf_alloc(&nt35510_fwvga_rx_buf, DSI_BUF_SIZE);

	ret = platform_driver_register(&this_driver);
	if (!ret)
	{
		pinfo = &nt35510_fwvga_panel_data.panel_info;
		pinfo->xres = 480;
		pinfo->yres = 854;
		pinfo->type = MIPI_CMD_PANEL;
		pinfo->pdest = DISPLAY_1;
		pinfo->wait_cycle = 0;
		pinfo->bpp = 24;		
		pinfo->bl_max = 255;
		pinfo->bl_min = 30;		
		pinfo->fb_num = 2;
        /* increase the DSI bit clock to 490 MHz */
		pinfo->clk_rate = 490000000;
		pinfo->lcd.refx100 = 6000; /* adjust refx100 to prevent tearing */

		pinfo->mipi.mode = DSI_CMD_MODE;
		pinfo->mipi.dst_format = DSI_CMD_DST_FORMAT_RGB888;
		pinfo->mipi.vc = 0;
		pinfo->mipi.rgb_swap = DSI_RGB_SWAP_RGB;
		pinfo->mipi.data_lane0 = TRUE;
		pinfo->mipi.data_lane1 = TRUE;
		pinfo->mipi.t_clk_post = 0xB0;// min 60 + 128*UI
		pinfo->mipi.t_clk_pre = 0x2f;// min 8*UI
		pinfo->mipi.stream = 0; /* dma_p */
		pinfo->mipi.mdp_trigger = DSI_CMD_TRIGGER_SW;
		pinfo->mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
		pinfo->lcd.hw_vsync_mode = TRUE;
		pinfo->lcd.vsync_enable = TRUE;
		pinfo->mipi.te_sel = 1; /* TE from vsync gpio */
		pinfo->mipi.interleave_max = 1;
		pinfo->mipi.insert_dcs_cmd = TRUE;
		pinfo->mipi.wr_mem_continue = 0x3c;
		pinfo->mipi.wr_mem_start = 0x2c;
		pinfo->mipi.dsi_phy_db = &dsi_cmd_mode_phy_db_nt35510_fwvga;
		pinfo->mipi.tx_eot_append = 0x01;
		pinfo->mipi.rx_eot_ignore = 0;
		pinfo->mipi.dlane_swap = 0x1;

		ret = platform_device_register(&this_device);
		if (ret)
			LCD_DEBUG("%s: failed to register device!\n", __func__);
	}

	return ret;
}

开发者ID:android-armv7a-belalang-tempur，项目名称:huawei-kernel-3.4，代码行数:60，代码来源:mipi_nt35510_cmd_fwvga.c

示例3: nt35510_config_auto_cabc

static int nt35510_config_auto_cabc(struct msmfb_cabc_config cabc_cfg,struct msm_fb_data_type *mfd)
{
	int ret = 0;

	switch(cabc_cfg.mode)
	{
		case CABC_MODE_UI:
			/* the value of cabc register should be 24 in UI mode */
			nt35510_auto_cabc_set_table[1].reg=0x00024;
			nt35510_auto_cabc_set_table[3].reg=0x00001;
			break;
		case CABC_MODE_MOVING:
		case CABC_MODE_STILL:
			/* the value of cabc register should be 2C in moving mode and still mode */
			nt35510_auto_cabc_set_table[1].reg=0x0002C;
			nt35510_auto_cabc_set_table[3].reg=0x00003;
			break;
		default:
			LCD_DEBUG("%s: invalid cabc mode: %d\n", __func__, cabc_cfg.mode);
	        ret = -EINVAL;
			break;
	}
	if(likely(0 == ret))
	{
		process_mipi_table(mfd,&nt35510_tx_buf,(struct sequence*)&nt35510_auto_cabc_set_table,
			 ARRAY_SIZE(nt35510_auto_cabc_set_table), lcd_panel_wvga);
	}

	LCD_DEBUG("%s: change cabc mode to %d\n",__func__,cabc_cfg.mode);
	return ret;
}

开发者ID:Subject4S，项目名称:android_kernel_huawei_msm8x25-common，代码行数:31，代码来源:mipi_nt35510_cmd_wvga.c

示例4: hx8357a_hvga_panel_on

static int hx8357a_hvga_panel_on(struct platform_device *pdev)
{
    if (!hx8357a_hvga_state.disp_initialized) 
    {
        hx8357a_hvga_reset();
        lcd_spi_init(lcdc_hx8357a_hvga_pdata);	/* LCD needs SPI */
        hx8357a_hvga_disp_powerup();
        hx8357a_hvga_disp_on();
        hx8357a_hvga_state.disp_initialized = TRUE;
        LCD_DEBUG("%s: hx8357a lcd initialized\n", __func__);
    } 
    else if (!hx8357a_hvga_state.display_on) 
    {
    	switch(lcd_panel_hvga)
    	{
    	    case LCD_HX8357A_TRULY_HVGA:
    	      /* Exit Standby Mode */
    	      process_lcdc_table((struct command*)&hx8357a_truly_hvga_standby_exit_table, ARRAY_SIZE(hx8357a_truly_hvga_standby_exit_table));
    	      break;
    	    
    	    case LCD_HX8357A_WINTEK_HVGA:
    	      /* Exit Standby Mode */
    	      process_lcdc_table((struct command*)&hx8357a_wintek_hvga_standby_exit_table, ARRAY_SIZE(hx8357a_wintek_hvga_standby_exit_table));
    	      break;
    	}
        LCD_DEBUG("%s: Exit Standby Mode\n", __func__);
        hx8357a_hvga_state.display_on = TRUE;
    }
    
    return 0;
}

开发者ID:AntonioPT，项目名称:u8150-kernel-pulse-port，代码行数:31，代码来源:lcdc_hx8357a_hvga.c

示例5: hx8357c_hvga_panel_on

static int hx8357c_hvga_panel_on(struct platform_device *pdev)
{
    boolean para_debug_flag = FALSE;
    uint32 para_num = 0;
    /* open debug file and read the para */
    switch(lcd_panel_hvga)
    {
        case LCD_HX8357C_TIANMA_HVGA:
            para_debug_flag = lcd_debug_malloc_get_para( "hx8357c_tianma_hvga_init_table", 
            (void**)&hx8357c_hvga_init_table,&para_num);
            break;
        default:
            break;
    }    
       
    if (!hx8357c_hvga_state.disp_initialized) 
    {
        hx8357c_hvga_reset();
        lcd_spi_init(lcdc_hx8357c_hvga_pdata);	/* LCD needs SPI */
        hx8357c_hvga_disp_powerup();
        hx8357c_hvga_disp_on(); 
        hx8357c_hvga_state.disp_initialized = TRUE;
        if( (TRUE == para_debug_flag) && (NULL != hx8357c_hvga_init_table))
        {
            // lcd_reset();
            process_lcdc_table(hx8357c_hvga_init_table, para_num,lcd_panel_hvga);
        }
        LCD_DEBUG("%s: hx8357c lcd initialized\n", __func__);
    } 
    else if (!hx8357c_hvga_state.display_on) 
    {
    	switch(lcd_panel_hvga)
    	{
    	    case LCD_HX8357C_TIANMA_HVGA:
                if( (TRUE == para_debug_flag)&&(NULL != hx8357c_hvga_init_table))
                {
                     //  lcd_reset();
                     process_lcdc_table(hx8357c_hvga_init_table, para_num,lcd_panel_hvga);

                }
                else
                {
                    /* Exit Standby Mode */
                    process_lcdc_table((struct sequence*)&hx8357c_tianma_hvga_standby_exit_table, 
                    	ARRAY_SIZE(hx8357c_tianma_hvga_standby_exit_table), lcd_panel_hvga);
                }
                break;			
            default:
                break;
    	}
         LCD_DEBUG("%s: Exit Standby Mode\n", __func__);
        hx8357c_hvga_state.display_on = TRUE;
    }
/* Must malloc before,then you can call free */
	if((TRUE == para_debug_flag)&&(NULL != hx8357c_hvga_init_table))
	{
		lcd_debug_free_para((void *)hx8357c_hvga_init_table);
	}
    return 0;
}

开发者ID:agrloki，项目名称:CeXstel-kernel-msm8x25，代码行数:60，代码来源:lcdc_hx8357c_hvga.c

示例6: nt35410_hvga_panel_on

static int nt35410_hvga_panel_on(struct platform_device *pdev)
{
    boolean para_debug_flag = FALSE;
    uint32 para_num = 0;
	
    switch(lcd_panel_hvga)
    {
        case LCD_NT35410_CHIMEI_HVGA:
            para_debug_flag = lcd_debug_malloc_get_para( "lcdc_nt35410_hvga_init_table", 
            (void**)&lcdc_nt35410_hvga_init_table,&para_num);
            break;
        default:
            break;
    }    
	
    if (!nt35410_hvga_state.disp_initialized) 
    {
        nt35410_hvga_reset();
        lcd_spi_init(lcdc_nt35410_hvga_pdata);	/* LCD needs SPI */
        nt35410_hvga_disp_powerup();
        nt35410_hvga_disp_on();
        nt35410_hvga_state.disp_initialized = TRUE;
    	if((TRUE == para_debug_flag) && (NULL != lcdc_nt35410_hvga_init_table))
        {
            process_lcdc_table(lcdc_nt35410_hvga_init_table,para_num,lcd_panel_hvga);
        }

        LCD_DEBUG("%s: nt35410 lcd initialized\n", __func__);
    } 
    else if (!nt35410_hvga_state.display_on) 
    {
    	switch(lcd_panel_hvga)
    	{
    	    case LCD_NT35410_CHIMEI_HVGA:
    		if( (TRUE == para_debug_flag)&&(NULL != lcdc_nt35410_hvga_init_table))
            {
                process_lcdc_table(lcdc_nt35410_hvga_init_table,para_num,lcd_panel_hvga);

            }
    		else
    		{
    	    	/* Exit Standby Mode */
                process_lcdc_table((struct sequence*)&nt35410_chimei_hvga_standby_exit_table, 
                ARRAY_SIZE(nt35410_chimei_hvga_standby_exit_table),lcd_panel_hvga);
    		}
            break;
        default:
            break;
    	}
        LCD_DEBUG("%s: Exit Standby Mode\n", __func__);
        nt35410_hvga_state.display_on = TRUE;
    }
/* Must malloc before,then you can call free */
    if((TRUE == para_debug_flag)&&(NULL != lcdc_nt35410_hvga_init_table))
    {
         lcd_debug_free_para((void *)lcdc_nt35410_hvga_init_table);
    }
    return 0;
}

开发者ID:Justin-G，项目名称:kernel_huawei_c8650，代码行数:59，代码来源:lcdc_nt35410_hvga.c

示例7: lcdc_s6d74a0_panel_init

static int __init lcdc_s6d74a0_panel_init(void)
{
	int ret;
	struct msm_panel_info *pinfo;

#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
	//if (msm_fb_detect_client("lcdc_s6d74a0_hvga"))
	//	return 0;
#endif

	LCD_DEBUG("ENTER lcdc_s6d74a0_panel_init\n");

    lcd_panel_hvga = lcd_panel_probe();
    if((LCD_S6D74A0_SAMSUNG_HVGA != lcd_panel_hvga) && \
       (msm_fb_detect_client("lcdc_s6d74a0_hvga"))
       )
    {
        return 0;
    }
	
	ret = platform_driver_register(&this_driver);
	if (ret)
		return ret;

	pinfo = &s6d74a0_panel_data.panel_info;
	pinfo->xres = 320;
	pinfo->yres = 480;
	pinfo->type = LCDC_PANEL;
	pinfo->pdest = DISPLAY_1;
	pinfo->wait_cycle = 0;
	pinfo->bpp = 24;
	pinfo->fb_num = 2;
/*modify HVGA LCD pclk frequency to 8.192MHz*/
    /*the pixel clk is different for different Resolution LCD*/
	//pinfo->clk_rate = 24500000; /*for VGA pixel clk*/
	//pinfo->clk_rate = 8192000;    /*for HVGA pixel clk*/
	pinfo->clk_rate = 9660000; 
    //pinfo->clk_rate = 6125000;  /*for QVGA pixel clk*/
	pinfo->lcdc.h_back_porch = 7;
	pinfo->lcdc.h_front_porch = 4;
	pinfo->lcdc.h_pulse_width = 4;
	pinfo->lcdc.v_back_porch = 2;
	pinfo->lcdc.v_front_porch = 4;
	pinfo->lcdc.v_pulse_width = 2;
	pinfo->lcdc.border_clr = 0;     /* blk */
	pinfo->lcdc.underflow_clr = 0xff;       /* blue */
	pinfo->lcdc.hsync_skew = 0;
	pinfo->bl_max = 255;

	ret = platform_device_register(&this_device);
	if (ret)
		platform_driver_unregister(&this_driver);

	LCD_DEBUG(" lcdc_s6d74a0_panel_init OK \n");
	return ret;
}

开发者ID:Justin-G，项目名称:kernel_huawei_c8650，代码行数:56，代码来源:lcdc_s6d74a0_hvga.c

示例8: sp_send

void sp_send(const uint _debug) {
    if (sp_fd >= 0) {
        if (strlen(sp_tx_buf) > 0) {
            LCD_DEBUG(_debug,"- sp_tx_buf = [%s]\tbefore send\n", sp_tx_buf);
            LED_SET(LED_LCD,1);
            write(sp_fd, sp_tx_buf, strlen(sp_tx_buf));
        }
        memset(sp_tx_buf, 0, sizeof (sp_tx_buf));
        LCD_DEBUG(_debug,"- sp_tx_buf = [%s]\tafter send\n", sp_tx_buf);
    }
}

开发者ID:yaoyang-6h，项目名称:gwsman，代码行数:11，代码来源:lcd_sp.c

示例9: nt35582_init

static int __init nt35582_init(void)
{
	int ret;
	struct msm_panel_info *pinfo;
	lcd_panel_wvga=get_lcd_panel_type();
	if((LCD_NT35582_TRULY_WVGA!=lcd_panel_wvga)&&
		(LCD_NT35582_BYD_WVGA!=lcd_panel_wvga))
	{
		return 0;
	}
	LCD_DEBUG("------nt35582_init------\n");
	
	ret = platform_driver_register(&this_driver);
	if (!ret) {
		pinfo = &nt35582_panel_data.panel_info;
		pinfo->xres = 480;
		pinfo->yres = 800;
		pinfo->type = MDDI_PANEL;
		pinfo->pdest = DISPLAY_1;
		pinfo->mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
		pinfo->wait_cycle = 0;
/* Set MDDI clk 192MHz,set 24bit per pixel,
 * adjust the start of data to sync with vsync signal
 */
/* change 24bit into 16bit */
		pinfo->bpp = 16;
		pinfo->fb_num = 2;
        pinfo->clk_rate = 192000000;
	    pinfo->clk_min = 192000000;
	    pinfo->clk_max = 192000000;
        LCD_DEBUG("%s: BYD LCD and Truly LCD,set MDDI_CLK=%d \n",__func__, pinfo->clk_rate);
		pinfo->lcd.vsync_enable = TRUE;
/* Reduce the fps,sync depend on the vsync signal*/
        pinfo->lcd.refx100 = 4000;
		pinfo->lcd.v_back_porch = 0;
		pinfo->lcd.v_front_porch = 0;
		pinfo->lcd.v_pulse_width = 22;
		pinfo->lcd.hw_vsync_mode = TRUE;
		pinfo->lcd.vsync_notifier_period = 0;
		pinfo->bl_max = 255;


		ret = platform_device_register(&this_device);
		if (ret)
			{
			platform_driver_unregister(&this_driver);
			LCD_DEBUG("%s: Failed on platform_device_register(): rc=%d \n",__func__, ret);
			}
		}

	return ret;
}

开发者ID:agrloki，项目名称:CeXstel-kernel-msm8x25，代码行数:52，代码来源:mddi_nt35582.c

示例10: nt35560_set_cabc_moving_detect

/***************************************************************
Function: nt35560_set_cabc_moving_detect
Description: Set CABC moving detect function on or off
Parameters:
    uint32 state: 0 for off, 1 for on
Return:
    0: success
***************************************************************/
static int nt35560_set_cabc_moving_detect(uint32 state)
{
    int ret = 0;

    if (state == STATE_OFF)
    {
        /* Turn off automatic moving mode selection */
        nt35560_fwvga_automatic_moving_selection_table[0].value = DEFAULT_VAL_MOV_CTRL1;
        ret = process_mddi_table((struct sequence*)&nt35560_fwvga_automatic_moving_selection_table,
                    ARRAY_SIZE(nt35560_fwvga_automatic_moving_selection_table), lcd_panel_fwvga);
    }
    else
    {
        /* Automatic moving mode selection
         * If host's frame RAM update rate is 20 frames per second,
         * the CABC mode will be changed from still mode to moving mode.
         * This function is only available in normal display mode with CABC mode is set still mode.
         */
        nt35560_fwvga_automatic_moving_selection_table[0].value = (DEFAULT_VAL_MOV_CTRL1 & (~MASK_MOVDET)) | VAL_MOVDET(0x13);
        ret = process_mddi_table((struct sequence*)&nt35560_fwvga_automatic_moving_selection_table,
                    ARRAY_SIZE(nt35560_fwvga_automatic_moving_selection_table), lcd_panel_fwvga);
    }
    LCD_DEBUG("%s: set cabc moving detect: %d\n", __func__, state);

    return ret;
}

开发者ID:markcn，项目名称:kernel_huawei_c8812，代码行数:34，代码来源:mddi_nt35560.c

示例11: lcm_resume_tm

static void lcm_resume_tm(void)
{

    //enable VSP & VSN
	lcm_util.set_gpio_out(GPIO_LCD_BIAS_ENP_PIN, GPIO_OUT_ONE);
	mdelay(10);
	lcm_util.set_gpio_out(GPIO_LCD_BIAS_ENN_PIN, GPIO_OUT_ONE);
    msleep(50); 

    //reset low to high
    lcm_util.set_gpio_out(GPIO_DISP_LRSTB_PIN, GPIO_OUT_ONE);
    mdelay(5); 
    lcm_util.set_gpio_out(GPIO_DISP_LRSTB_PIN, GPIO_OUT_ZERO);
    mdelay(5); 
    lcm_util.set_gpio_out(GPIO_DISP_LRSTB_PIN, GPIO_OUT_ONE);
    msleep(20); 

    push_table(lcm_initialization_setting_tm, sizeof(lcm_initialization_setting_tm) / sizeof(struct LCM_setting_table), 1);
    //Back to MP.P7 baseline , solve LCD display abnormal On the right
    //when sleep out, config output high ,enable backlight drv chip  
    lcm_util.set_gpio_out(GPIO_LCD_DRV_EN_PIN, GPIO_OUT_ONE);

    LCD_DEBUG("uboot:tm_nt35521_lcm_resume\n");

}

开发者ID:jawad6233，项目名称:android_kernel_huawei_h30t00，代码行数:25，代码来源:nt35521_hd720_dsi_vdo_tm.c

示例12: hx8357c_lcd_on

static int hx8357c_lcd_on(struct platform_device *pdev)
{
	boolean para_debug_flag = FALSE;
    uint32 para_num = 0;
	int ret = 0;

 	/* open debug file and read the para */
	para_debug_flag = lcd_debug_malloc_get_para( "hx8357c_hvga_init_table", 
		(void**)&hx8357c_hvga_init_table,&para_num);

	/* If exist the init file ,then init lcd with it for debug */
    if( (TRUE == para_debug_flag)&&(NULL != hx8357c_hvga_init_table))
    {
		ret = process_mddi_table(hx8357c_hvga_init_table, para_num, lcd_panel_hvga);
    }
    else
    {
		/* Exit Standby Mode */
		ret = process_mddi_table((struct sequence*)&hx8357c_hvga_standby_exit_table, 
			ARRAY_SIZE(hx8357c_hvga_standby_exit_table), lcd_panel_hvga);
    }
       
	/* Must malloc before,then you can call free */
	if((TRUE == para_debug_flag)&&(NULL != hx8357c_hvga_init_table))
	{
		lcd_debug_free_para((void *)hx8357c_hvga_init_table);
	}
	
    LCD_DEBUG("%s: hx8357c_lcd exit sleep mode ,on_ret=%d\n",__func__,ret);
	
	return ret;
}

开发者ID:CrysisLTU，项目名称:Project-X5pro-Kernel-u8800pro，代码行数:32，代码来源:mddi_hx8357c.c

示例13: hx8357c_set_dynamic_gamma

/* add the function  to set different gama by different mode */
int hx8357c_set_dynamic_gamma(enum danymic_gamma_mode  gamma_mode)
{
    int ret = 0;
	
    if (LOW_LIGHT == gamma_mode)
    {
        printk(KERN_ERR "the dynamic_gamma_setting is wrong\n");
    }

    switch(gamma_mode)
    {
        case GAMMA25:
            ret = process_mddi_table((struct sequence*)&hx8357c_hvga_dynamic_gamma25_table,
                        ARRAY_SIZE(hx8357c_hvga_dynamic_gamma25_table), lcd_panel_hvga);			
            break ;
        case GAMMA22:
			 ret = process_mddi_table((struct sequence*)&hx8357c_hvga_dynamic_gamma22_table,
                        ARRAY_SIZE(hx8357c_hvga_dynamic_gamma22_table), lcd_panel_hvga);	
            break;
        case HIGH_LIGHT:
            ret = process_mddi_table((struct sequence*)&hx8357c_hvga_dynamic_gamma19_table,
                        ARRAY_SIZE(hx8357c_hvga_dynamic_gamma19_table), lcd_panel_hvga);
            break;
        default:
            ret= -1;
            break;
    }
	LCD_DEBUG("%s: change gamma mode to %d\n",__func__,gamma_mode);
    return ret;
}

开发者ID:CrysisLTU，项目名称:Project-X5pro-Kernel-u8800pro，代码行数:31，代码来源:mddi_hx8357c.c

示例14: nt35410_hvga_disp_on

static void nt35410_hvga_disp_on(void)
{
    if (nt35410_hvga_state.disp_powered_up && !nt35410_hvga_state.display_on) 
    {
        LCD_DEBUG("%s: disp on lcd\n", __func__);
        nt35410_hvga_state.display_on = TRUE;
    }
}

开发者ID:Justin-G，项目名称:kernel_huawei_c8650，代码行数:8，代码来源:lcdc_nt35410_hvga.c

示例15: nt35510_lcd_off_type2

static int nt35510_lcd_off_type2(struct platform_device *pdev)
{
	int ret = 0;
	ret = process_mddi_table((struct sequence*)&nt35510_wvga_standby_enter_table_type2, 
    	      		ARRAY_SIZE(nt35510_wvga_standby_enter_table_type2), lcd_panel_wvga);
    LCD_DEBUG("%s: nt35510_lcd_type2 enter sleep mode ,off_ret=%d\n",__func__,ret);
	return ret;
}

开发者ID:agrloki，项目名称:CeXstel-kernel-msm8x25，代码行数:8，代码来源:mddi_nt35510_type2.c

示例16: hx8357c_lcd_off

static int hx8357c_lcd_off(struct platform_device *pdev)
{
	int ret = 0;
	ret = process_mddi_table((struct sequence*)&hx8357c_hvga_standby_enter_table, 
    	      		ARRAY_SIZE(hx8357c_hvga_standby_enter_table), lcd_panel_hvga);
    LCD_DEBUG("%s: hx8357c_lcd enter sleep mode ,off_ret=%d\n",__func__,ret);
	return ret;
}

开发者ID:CrysisLTU，项目名称:Project-X5pro-Kernel-u8800pro，代码行数:8，代码来源:mddi_hx8357c.c

示例17: lcdc_s6d74a0_panel_on

static int lcdc_s6d74a0_panel_on(struct platform_device *pdev)
{
	boolean para_debug_flag = FALSE;
	uint32 para_num = 0;

	LCD_DEBUG("ENTER lcdc_s6d74a0_panel_on\n");
	/* open debug file and read the para */
	switch(lcd_panel_hvga)
	{
		case LCD_S6D74A0_SAMSUNG_HVGA:
			para_debug_flag = lcd_debug_malloc_get_para( "s6d74a0_samsung_init_table", 
			(void**)&s6d74a0_samsung_init_table,&para_num);
			break;
		default:
			break;
	} 
	if(!lcd_s6d74a0_state.disp_initialized)
	{
		lcdc_s6d74a0_pdata->panel_config_gpio(1);
		lcd_reset_gpio = *(lcdc_s6d74a0_pdata->gpio_num + 4);		
		lcd_spi_init(lcdc_s6d74a0_pdata);	/* LCD needs SPI */
		lcd_s6d74a0_disp_powerup();
		lcd_s6d74a0_state.display_on = TRUE;
		lcd_s6d74a0_state.disp_initialized = TRUE;

	}
	else if(!lcd_s6d74a0_state.display_on)
	{
		switch(lcd_panel_hvga)
		{
		case LCD_S6D74A0_SAMSUNG_HVGA:
			if((TRUE == para_debug_flag)
				&&(NULL != s6d74a0_samsung_init_table))
			{
				//seriout(0x0010, 0x0000); the table should add this value on the front delete by zhangpeng 20110112
				process_lcdc_table(s6d74a0_samsung_init_table, para_num, LCD_S6D74A0_SAMSUNG_HVGA);
			}
			else
			{
				process_lcdc_table((struct sequence*)&s6d74a0_samsung_init, 
						ARRAY_SIZE(s6d74a0_samsung_init), LCD_S6D74A0_SAMSUNG_HVGA);	
			}
			break;
		default:
			break;
		}
		lcd_s6d74a0_state.display_on = TRUE;  
	}

	/* Must malloc before,then you can call free */
	if((TRUE == para_debug_flag)&&(NULL != s6d74a0_samsung_init_table))
	{
		lcd_debug_free_para((void *)s6d74a0_samsung_init_table);
	}
	return 0;	
	
}

开发者ID:Justin-G，项目名称:kernel_huawei_c8650，代码行数:57，代码来源:lcdc_s6d74a0_hvga.c

示例18: hx8347d_qvga_disp_on

static void hx8347d_qvga_disp_on(void)
{
    if (hx8347d_qvga_state.disp_powered_up && !hx8347d_qvga_state.display_on) 
    {
        LCD_DEBUG("%s: disp on lcd\n", __func__);
        /* Initialize LCD */
        hx8347d_qvga_state.display_on = TRUE;
    }
}

开发者ID:agrloki，项目名称:CeXstel-kernel-msm8x25，代码行数:9，代码来源:lcdc_hx8347d_qvga.c

示例19: truly_r61529_hvga_panel_init

static int __init truly_r61529_hvga_panel_init(void)
{
	int ret;
	struct msm_panel_info *pinfo;

	/*< DTS2011122306018 fengwei 20111224 begin */
	lcd_panel_hvga = get_lcd_panel_type();
	/* DTS2011122306018 fengwei 20111224 end >*/
	if((LCD_R61529_TRULY_HVGA != lcd_panel_hvga) &&  \
	    (msm_fb_detect_client(lCD_DRIVER_NAME))  )
	{
		return 0;
	}

	LCD_DEBUG(" lcd_type=%s, lcd_panel_hvga = %d\n", lCD_DRIVER_NAME, lcd_panel_hvga);

	ret = platform_driver_register(&this_driver);
	if (ret)
		return ret;

	pinfo = &truly_r61529_hvga_panel_data.panel_info;
	pinfo->xres = 320;
	pinfo->yres = 480;
	pinfo->type = LCDC_PANEL;
	pinfo->pdest = DISPLAY_1;
	pinfo->wait_cycle = 0;
	pinfo->bpp = 18;
	pinfo->fb_num = 2;
	pinfo->bl_max = LCD_MAX_BACKLIGHT_LEVEL;
	pinfo->bl_min = LCD_MIN_BACKLIGHT_LEVEL;
	if(LCD_R61529_TRULY_HVGA== lcd_panel_hvga)
	{
		/* changge the frequency high */
		pinfo->clk_rate = 9660 * 1000;    /*for HVGA pixel clk*/
	}
	else
	{
		pinfo->clk_rate = 8192000;    /*for HVGA pixel clk*/
	}
	pinfo->lcdc.h_back_porch = 20;
	pinfo->lcdc.h_front_porch = 40;
	pinfo->lcdc.h_pulse_width = 10;
	pinfo->lcdc.v_back_porch = 8;
	pinfo->lcdc.v_front_porch = 15;
	pinfo->lcdc.v_pulse_width = 2;

	pinfo->lcdc.border_clr = 0;     /* blk */
	pinfo->lcdc.underflow_clr = 0xff;       /* blue */
	pinfo->lcdc.hsync_skew = 0;

	ret = platform_device_register(&this_device);
	if (ret)
		platform_driver_unregister(&this_driver);

	return ret;
}

开发者ID:desalesouche，项目名称:Project-X5pro-Kernel-u8860-u8800pro，代码行数:56，代码来源:lcdc_truly_r61529_hvga.c

示例20: truly_r61529_hvga_disp_on

static void truly_r61529_hvga_disp_on(void)
{
	if (truly_r61529_hvga_state.disp_powered_up && !truly_r61529_hvga_state.display_on) 
	{
		LCD_DEBUG("%s: disp on lcd\n", __func__);
		/* Initialize LCD */
		truly_r61529_hvga_state.display_on = TRUE;
	}
	return;
}

开发者ID:desalesouche，项目名称:Project-X5pro-Kernel-u8860-u8800pro，代码行数:10，代码来源:lcdc_truly_r61529_hvga.c

注：本文中的LCD_DEBUG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ LCD_DataWrite函数代码示例发布时间：2022-05-30

C++ LCD_CmdWrite函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18239|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9667|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8453|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9383|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8425|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7858|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ LCD_DEBUG函数代码示例

示例1: hx8369b_config_auto_cabc

示例2: mipi_cmd_nt35510_fwvga_init

示例3: nt35510_config_auto_cabc

示例4: hx8357a_hvga_panel_on

示例5: hx8357c_hvga_panel_on

示例6: nt35410_hvga_panel_on

示例7: lcdc_s6d74a0_panel_init

示例8: sp_send

示例9: nt35582_init

示例10: nt35560_set_cabc_moving_detect

示例11: lcm_resume_tm

示例12: hx8357c_lcd_on

示例13: hx8357c_set_dynamic_gamma

示例14: nt35410_hvga_disp_on

示例15: nt35510_lcd_off_type2

示例16: hx8357c_lcd_off

示例17: lcdc_s6d74a0_panel_on

示例18: hx8347d_qvga_disp_on

示例19: truly_r61529_hvga_panel_init

示例20: truly_r61529_hvga_disp_on

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

CVE-2022-36900

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053