C++ LCD_IO_WriteReg函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中LCD_IO_WriteReg函数的典型用法代码示例。如果您正苦于以下问题：C++ LCD_IO_WriteReg函数的具体用法？C++ LCD_IO_WriteReg怎么用？C++ LCD_IO_WriteReg使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了LCD_IO_WriteReg函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: st7735_DisplayOff

/**
  * @brief  Disables the Display.
  * @param  None
  * @retval None
  */
void st7735_DisplayOff(void)
{
  uint8_t data = 0;
  LCD_IO_WriteReg(LCD_REG_19);
  LCD_Delay(10);
  LCD_IO_WriteReg(LCD_REG_40);
  LCD_Delay(10);
  LCD_IO_WriteReg(LCD_REG_54);
  data = 0xC0;
  LCD_IO_WriteMultipleData(&data, 1);
}

开发者ID:Bit-Embedded-3，项目名称:smart_glove，代码行数:16，代码来源:st7735.c

示例2: st7735_SetCursor

/**
  * @brief  Sets Cursor position.
  * @param  Xpos: specifies the X position.
  * @param  Ypos: specifies the Y position.
  * @retval None
  */
void st7735_SetCursor(uint16_t Xpos, uint16_t Ypos)
{
  uint8_t data = 0;
  LCD_IO_WriteReg(LCD_REG_42);
  data = (Xpos) >> 8;
  LCD_IO_WriteMultipleData(&data, 1);
  data = (Xpos) & 0xFF;
  LCD_IO_WriteMultipleData(&data, 1);
  LCD_IO_WriteReg(LCD_REG_43); 
  data = (Ypos) >> 8;
  LCD_IO_WriteMultipleData(&data, 1);
  data = (Ypos) & 0xFF;
  LCD_IO_WriteMultipleData(&data, 1);
  LCD_IO_WriteReg(LCD_REG_44);
}

开发者ID:Bit-Embedded-3，项目名称:smart_glove，代码行数:21，代码来源:st7735.c

示例3: spfd5408_WriteReg

/**
  * @brief  Writes to the selected LCD register.
  * @param  LCDReg:      address of the selected register.
  * @param  LCDRegValue: value to write to the selected register.
  * @retval None
  */
void spfd5408_WriteReg(uint8_t LCDReg, uint16_t LCDRegValue)
{
  LCD_IO_WriteReg(LCDReg);
  
  /* Write 16-bit GRAM Reg */
  LCD_IO_WriteData((uint8_t*)&LCDRegValue, 2);
}

开发者ID:s-ciprian，项目名称:f3_disc_usb，代码行数:13，代码来源:spfd5408.c

示例4: ili9325_DrawBitmap

/**
  * @brief  Displays a bitmap picture.
  * @param  BmpAddress: Bmp picture address.
  * @param  Xpos: Bmp X position in the LCD
  * @param  Ypos: Bmp Y position in the LCD    
  * @retval None
  */
void ili9325_DrawBitmap(uint16_t Xpos, uint16_t Ypos, uint8_t *pbmp)
{
  uint32_t index = 0, size = 0;
  /* Read bitmap size */
  size = *(volatile uint16_t *) (pbmp + 2);
  size |= (*(volatile uint16_t *) (pbmp + 4)) << 16;
  /* Get bitmap data address offset */
  index = *(volatile uint16_t *) (pbmp + 10);
  index |= (*(volatile uint16_t *) (pbmp + 12)) << 16;
  size = (size - index)/2;
  pbmp += index;
  /* Set GRAM write direction and BGR = 1 */
  /* I/D=00 (Horizontal : decrement, Vertical : decrement) */
  /* AM=1 (address is updated in vertical writing direction) */
  ili9325_WriteReg(LCD_REG_3, 0x1008);

  /* Set Cursor */
  ili9325_SetCursor(Xpos, Ypos);  
  
  /* Prepare to write GRAM */
  LCD_IO_WriteReg(LCD_REG_34);
 
  for(index = 0; index < size; index++)
  {
    /* Write 16-bit GRAM Reg */
    LCD_IO_WriteData(*(volatile uint16_t *)pbmp);
    pbmp += 2;
  }
 
  /* Set GRAM write direction and BGR = 1 */
  /* I/D = 01 (Horizontal : increment, Vertical : decrement) */
  /* AM = 1 (address is updated in vertical writing direction) */
  ili9325_WriteReg(LCD_REG_3, 0x1018);
}

开发者ID:Alexander-Wilms，项目名称:STM3240G-EVAL，代码行数:41，代码来源:ili9325.c

示例5: ili9325_WriteReg

/**
  * @brief  Writes to the selected LCD register.
  * @param  LCD_Reg: Address of the selected register.
  * @param  LCD_RegValue: Value to write to the selected register.
  * @retval None
  */
void ili9325_WriteReg(uint8_t LCD_Reg, uint16_t LCD_RegValue)
{
  LCD_IO_WriteReg(LCD_Reg);
  
  /* Write 16-bit GRAM Reg */
  LCD_IO_WriteData(LCD_RegValue);
}

开发者ID:Alexander-Wilms，项目名称:STM3240G-EVAL，代码行数:13，代码来源:ili9325.c

示例6: LCD_IO_ReadData

/**
  * @brief  Read register value.
  * @param  Reg
  * @retval None
  */
uint16_t LCD_IO_ReadData(uint16_t Reg) 
{
  uint32_t readvalue = 0;

  /* Send Reg value to Read */
  LCD_IO_WriteReg(Reg);

  /* Reset LCD control line(/CS) and Send command */
  LCD_CS_LOW();
  
  /* Send Start Byte */
  SPIx_Write(START_BYTE | LCD_READ_REG);

  /* Read Upper Byte */
  SPIx_Write(0xFF);
  readvalue = SPIx_Read();
  readvalue = readvalue << 8;
  readvalue |= SPIx_Read();
  
  HAL_Delay(10);

  /* Deselect : Chip Select high */
  LCD_CS_HIGH();
  return readvalue;
}

开发者ID:S4mw1s3，项目名称:Nucleo32，代码行数:30，代码来源:stm32l073z_eval.c

示例7: LCD_IO_ReadData

/**
  * @brief  Read register value.
  * @param  Reg
  * @retval None
  */
uint16_t LCD_IO_ReadData(uint16_t Reg) 
{
  uint32_t readvalue = 0;

  /* Change BaudRate Prescaler 8 for Read */
  /* Mean SPI baudrate is set to 72/8 = 9 MHz */
  heval_Spi.Instance->CR1 &= 0xFFC7;
  heval_Spi.Instance->CR1 |= SPI_BAUDRATEPRESCALER_8;
  
  /* Send Reg value to Read */
  LCD_IO_WriteReg(Reg);

  /* Reset LCD control line(/CS) and Send command */
  LCD_CS_LOW();
  
  /* Send Start Byte */
  SPIx_Write(START_BYTE | LCD_READ_REG);

  /* Read Upper Byte */
  SPIx_Write(0xFF);
  readvalue = SPIx_Read();
  readvalue = readvalue << 8;
  readvalue |= SPIx_Read();
  
  /* Recover Baud Rate initial value */
  heval_Spi.Instance->CR1 &= 0xFFC7;
  heval_Spi.Instance->CR1 |= heval_Spi.Init.BaudRatePrescaler;

  HAL_Delay(10);

  /* Deselect : Chip Select high */
  LCD_CS_HIGH();
  return readvalue;
}

开发者ID:afconsult-south，项目名称:dragonfly-fcb，代码行数:39，代码来源:stm32303e_eval.c

示例8: ili9325_DrawVLine

/**
  * @brief  Draw vertical line.
  * @param  RGB_Code: Specifies the RGB color    
  * @param  Xpos:     specifies the X position.
  * @param  Ypos:     specifies the Y position.
  * @param  Length:   specifies the Line length.  
  * @retval None
  */
void ili9325_DrawVLine(uint16_t RGB_Code, uint16_t Xpos, uint16_t Ypos, uint16_t Length)
{
  uint16_t i = 0;

  /* set GRAM write direction and BGR = 1 */
  /* I/D=00 (Horizontal : increment, Vertical : decrement) */
  /* AM=1 (address is updated in vertical writing direction) */
  ili9325_WriteReg(LCD_REG_3, 0x1010);
  
  /* Set Cursor */
  ili9325_SetCursor(Xpos, Ypos);
  
  /* Prepare to write GRAM */
  LCD_IO_WriteReg(LCD_REG_34);

  for(i = 0; i < Length; i++)
  {
    /* Write 16-bit GRAM Reg */
    LCD_IO_WriteData(RGB_Code);
  }
  
  /* set GRAM write direction and BGR = 1 */
  /* I/D=00 (Horizontal : increment, Vertical : decrement) */
  /* AM=1 (address is updated in vertical writing direction) */
  ili9325_WriteReg(LCD_REG_3, 0x1018);  
}

开发者ID:Alexander-Wilms，项目名称:STM3240G-EVAL，代码行数:34，代码来源:ili9325.c

示例9: spfd5408_DrawVLine

/**
  * @brief  Draw vertical line.
  * @param  RGBCode: Specifies the RGB color    
  * @param  Xpos:     specifies the X position.
  * @param  Ypos:     specifies the Y position.
  * @param  Length:   specifies the Line length.  
  * @retval None
  */
void spfd5408_DrawVLine(uint16_t RGBCode, uint16_t Xpos, uint16_t Ypos, uint16_t Length)
{
  uint16_t counter = 0;

  /* set GRAM write direction and BGR = 1 */
  /* I/D=00 (Horizontal : increment, Vertical : decrement) */
  /* AM=1 (address is updated in vertical writing direction) */
  spfd5408_WriteReg(LCD_REG_3, 0x1010);
  
  /* Set Cursor */
  spfd5408_SetCursor(Xpos, Ypos);
  /* Prepare to write GRAM */
  LCD_IO_WriteReg(LCD_REG_34);

  /* Fill a complete vertical line */
  for(counter = 0; counter < Length; counter++)
  {
    ArrayRGB[counter] = RGBCode;
  }
  
  /* Write 16-bit GRAM Reg */
  LCD_IO_WriteData((uint8_t*)&ArrayRGB[0], Length * 2);

  /* set GRAM write direction and BGR = 1 */
  /* I/D=00 (Horizontal : increment, Vertical : decrement) */
  /* AM=1 (address is updated in vertical writing direction) */
  spfd5408_WriteReg(LCD_REG_3, 0x1018);  
}

开发者ID:s-ciprian，项目名称:f3_disc_usb，代码行数:36，代码来源:spfd5408.c

示例10: ili9325_ReadReg

/**
  * @brief  Reads the selected LCD Register.
  * @param  LCD_Reg: address of the selected register.
  * @retval LCD Register Value.
  */
uint16_t ili9325_ReadReg(uint8_t LCD_Reg)
{
  /* Write 16-bit Index (then Read Reg) */
  LCD_IO_WriteReg(LCD_Reg);
  
  /* Read 16-bit Reg */
  return (LCD_IO_ReadData());
}

开发者ID:Alexander-Wilms，项目名称:STM3240G-EVAL，代码行数:13，代码来源:ili9325.c

示例11: ili9325_WritePixel

/**
  * @brief  Write pixel.   
  * @param  Xpos: specifies the X position.
  * @param  Ypos: specifies the Y position.
  * @param  RGB_Code: the RGB pixel color
  * @retval None
  */
void ili9325_WritePixel(uint16_t Xpos, uint16_t Ypos, uint16_t RGB_Code)
{
  /* Set Cursor */
  ili9325_SetCursor(Xpos, Ypos);
  
  /* Prepare to write GRAM */
  LCD_IO_WriteReg(LCD_REG_34);

  /* Write 16-bit GRAM Reg */
  LCD_IO_WriteData(RGB_Code);
}

开发者ID:Alexander-Wilms，项目名称:STM3240G-EVAL，代码行数:18，代码来源:ili9325.c

示例12: spfd5408_WritePixel

/**
  * @brief  Write pixel.   
  * @param  Xpos: specifies the X position.
  * @param  Ypos: specifies the Y position.
  * @param  RGBCode: the RGB pixel color
  * @retval None
  */
void spfd5408_WritePixel(uint16_t Xpos, uint16_t Ypos, uint16_t RGBCode)
{
  /* Set Cursor */
  spfd5408_SetCursor(Xpos, Ypos);
  
  /* Prepare to write GRAM */
  LCD_IO_WriteReg(LCD_REG_34);

  /* Write 16-bit GRAM Reg */
  LCD_IO_WriteData((uint8_t*)&RGBCode, 2);
}

开发者ID:s-ciprian，项目名称:f3_disc_usb，代码行数:18，代码来源:spfd5408.c

示例13: ili9325_ReadPixel

/**
  * @brief  Read pixel.
  * @param  None
  * @retval The RGB pixel color
  */
uint16_t ili9325_ReadPixel(uint16_t Xpos, uint16_t Ypos)
{
  /* Set Cursor */
  ili9325_SetCursor(Xpos, Ypos);
  
  /* Prepare to write GRAM */
  LCD_IO_WriteReg(LCD_REG_34);
  
  /* Dummy read */
  LCD_IO_ReadData();
  
  /* Read 16-bit Reg */
  return (LCD_IO_ReadData());
}

开发者ID:Alexander-Wilms，项目名称:STM3240G-EVAL，代码行数:19，代码来源:ili9325.c

示例14: st7735_SetDisplayWindow

/**
  * @brief  Sets a display window
  * @param  Xpos:   specifies the X bottom left position.
  * @param  Ypos:   specifies the Y bottom left position.
  * @param  Height: display window height.
  * @param  Width:  display window width.
  * @retval None
  */
void st7735_SetDisplayWindow(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height)
{
  uint8_t data = 0;
  /* Column addr set, 4 args, no delay: XSTART = Xpos, XEND = (Xpos + Width - 1) */
  LCD_IO_WriteReg(LCD_REG_42);
  data = (Xpos) >> 8;
  LCD_IO_WriteMultipleData(&data, 1);
  data = (Xpos) & 0xFF;
  LCD_IO_WriteMultipleData(&data, 1);
  data = (Xpos + Width - 1) >> 8;
  LCD_IO_WriteMultipleData(&data, 1);
  data = (Xpos + Width - 1) & 0xFF;
  LCD_IO_WriteMultipleData(&data, 1);
  /* Row addr set, 4 args, no delay: YSTART = Ypos, YEND = (Ypos + Height - 1) */
  LCD_IO_WriteReg(LCD_REG_43);
  data = (Ypos) >> 8;
  LCD_IO_WriteMultipleData(&data, 1);
  data = (Ypos) & 0xFF;
  LCD_IO_WriteMultipleData(&data, 1);
  data = (Ypos + Height - 1) >> 8;
  LCD_IO_WriteMultipleData(&data, 1);
  data = (Ypos + Height - 1) & 0xFF;
  LCD_IO_WriteMultipleData(&data, 1);
}

开发者ID:Bit-Embedded-3，项目名称:smart_glove，代码行数:32，代码来源:st7735.c

示例15: ili9325_DrawHLine

/**
  * @brief  Draw vertical line.
  * @param  RGB_Code: Specifies the RGB color   
  * @param  Xpos:     specifies the X position.
  * @param  Ypos:     specifies the Y position.
  * @param  Length:   specifies the Line length.  
  * @retval None
  */
void ili9325_DrawHLine(uint16_t RGB_Code, uint16_t Xpos, uint16_t Ypos, uint16_t Length)
{
  uint16_t i = 0;
  
  /* Set Cursor */
  ili9325_SetCursor(Xpos, Ypos); 
  
  /* Prepare to write GRAM */
  LCD_IO_WriteReg(LCD_REG_34);

  for(i = 0; i < Length; i++)
  {
    /* Write 16-bit GRAM Reg */
    LCD_IO_WriteData(RGB_Code);
  }  
}

开发者ID:Alexander-Wilms，项目名称:STM3240G-EVAL，代码行数:24，代码来源:ili9325.c

示例16: u8g_com_stm32duino_fsmc_fn

uint8_t u8g_com_stm32duino_fsmc_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
  if (msgInitCount) {
    if (msg == U8G_COM_MSG_INIT) msgInitCount--;
    if (msgInitCount) return -1;
  }

  static uint8_t isCommand;

  switch (msg) {
    case U8G_COM_MSG_STOP:
      break;
    case U8G_COM_MSG_INIT:
      u8g_SetPIOutput(u8g, U8G_PI_RESET);

      LCD_IO_Init(u8g->pin_list[U8G_PI_CS], u8g->pin_list[U8G_PI_A0]);
      u8g_Delay(100);

      if (arg_ptr != NULL)
        *((uint32_t *)arg_ptr) = LCD_IO_ReadData(LCD_READ_ID, 3);

      isCommand = 0;
      break;

    case U8G_COM_MSG_ADDRESS:           // define cmd (arg_val = 0) or data mode (arg_val = 1)
      isCommand = arg_val == 0 ? 1 : 0;
      break;

    case U8G_COM_MSG_RESET:
      u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
      break;

    case U8G_COM_MSG_WRITE_BYTE:
      if (isCommand)
        LCD_IO_WriteReg(arg_val);
      else
        LCD_IO_WriteData((uint16_t)arg_val);
      break;

    case U8G_COM_MSG_WRITE_SEQ:

      for (uint8_t i = 0; i < arg_val; i += 2)
        LCD_IO_WriteData(*(uint16_t *)(((uint32_t)arg_ptr) + i));
      break;
  }
  return 1;
}

开发者ID:szymonrychu，项目名称:Marlin，代码行数:46，代码来源:u8g_com_stm32duino_fsmc.cpp

示例17: ili9325_DrawRGBImage

/**
  * @brief  Displays picture.
  * @param  pdata: picture address.
  * @param  Xpos: Image X position in the LCD
  * @param  Ypos: Image Y position in the LCD
  * @param  Xsize: Image X size in the LCD
  * @param  Ysize: Image Y size in the LCD
  * @retval None
  */
void ili9325_DrawRGBImage(uint16_t Xpos, uint16_t Ypos, uint16_t Xsize, uint16_t Ysize, uint8_t *pdata)
{
  uint32_t index = 0, size = 0;

  size = (Xsize * Ysize);

  /* Set Cursor */
  ili9325_SetCursor(Xpos, Ypos);  
  
  /* Prepare to write GRAM */
  LCD_IO_WriteReg(LCD_REG_34);
 
  for(index = 0; index < size; index++)
  {
    /* Write 16-bit GRAM Reg */
    LCD_IO_WriteData(*(volatile uint16_t *)pdata);
    pdata += 2;
  }
}

开发者ID:Alexander-Wilms，项目名称:STM3240G-EVAL，代码行数:28，代码来源:ili9325.c

示例18: spfd5408_DrawHLine

/**
  * @brief  Draw vertical line.
  * @param  RGBCode: Specifies the RGB color   
  * @param  Xpos:     specifies the X position.
  * @param  Ypos:     specifies the Y position.
  * @param  Length:   specifies the Line length.  
  * @retval None
  */
void spfd5408_DrawHLine(uint16_t RGBCode, uint16_t Xpos, uint16_t Ypos, uint16_t Length)
{
  uint32_t i = 0;
  
  /* Set Cursor */
  spfd5408_SetCursor(Xpos, Ypos); 
  
  /* Prepare to write GRAM */
  LCD_IO_WriteReg(LCD_REG_34);

  
  /* Sent a complete line */
  for(i = 0; i < Length; i++)
  {
    ArrayRGB[i] = RGBCode;
  }  

  LCD_IO_WriteData((uint8_t*)&ArrayRGB[0], Length * 2);
}

开发者ID:s-ciprian，项目名称:f3_disc_usb，代码行数:27，代码来源:spfd5408.c

示例19: st7735_Init

/**
  * @brief  Initialize the ST7735 LCD Component.
  * @param  None
  * @retval None
  */
void st7735_Init(void)
{    
  uint8_t data = 0;
  
  /* Initialize ST7735 low level bus layer -----------------------------------*/
  LCD_IO_Init();
  /* Out of sleep mode, 0 args, no delay */
  st7735_WriteReg(LCD_REG_17, 0x00); 
  /* Frame rate ctrl - normal mode, 3 args:Rate = fosc/(1x2+40) * (LINE+2C+2D)*/
  LCD_IO_WriteReg(LCD_REG_177);
  data = 0x01;
  LCD_IO_WriteMultipleData(&data, 1);
  data = 0x2C;
  LCD_IO_WriteMultipleData(&data, 1);
  data = 0x2D;
  LCD_IO_WriteMultipleData(&data, 1);
  /* Frame rate control - idle mode, 3 args:Rate = fosc/(1x2+40) * (LINE+2C+2D) */    
  st7735_WriteReg(LCD_REG_178, 0x01);
  st7735_WriteReg(LCD_REG_178, 0x2C);
  st7735_WriteReg(LCD_REG_178, 0x2D);
  /* Frame rate ctrl - partial mode, 6 args: Dot inversion mode, Line inversion mode */ 
  st7735_WriteReg(LCD_REG_179, 0x01);
  st7735_WriteReg(LCD_REG_179, 0x2C);
  st7735_WriteReg(LCD_REG_179, 0x2D);
  st7735_WriteReg(LCD_REG_179, 0x01);
  st7735_WriteReg(LCD_REG_179, 0x2C);
  st7735_WriteReg(LCD_REG_179, 0x2D);
  /* Display inversion ctrl, 1 arg, no delay: No inversion */
  st7735_WriteReg(LCD_REG_180, 0x07);
  /* Power control, 3 args, no delay: -4.6V , AUTO mode */
  st7735_WriteReg(LCD_REG_192, 0xA2);
  st7735_WriteReg(LCD_REG_192, 0x02);
  st7735_WriteReg(LCD_REG_192, 0x84);
  /* Power control, 1 arg, no delay: VGH25 = 2.4C VGSEL = -10 VGH = 3 * AVDD */
  st7735_WriteReg(LCD_REG_193, 0xC5);
  /* Power control, 2 args, no delay: Opamp current small, Boost frequency */ 
  st7735_WriteReg(LCD_REG_194, 0x0A);
  st7735_WriteReg(LCD_REG_194, 0x00);
  /* Power control, 2 args, no delay: BCLK/2, Opamp current small & Medium low */  
  st7735_WriteReg(LCD_REG_195, 0x8A);
  st7735_WriteReg(LCD_REG_195, 0x2A);
  /* Power control, 2 args, no delay */
  st7735_WriteReg(LCD_REG_196, 0x8A);
  st7735_WriteReg(LCD_REG_196, 0xEE);
  /* Power control, 1 arg, no delay */
  st7735_WriteReg(LCD_REG_197, 0x0E);
  /* Don't invert display, no args, no delay */
  LCD_IO_WriteReg(LCD_REG_32);
  /* Set color mode, 1 arg, no delay: 16-bit color */
  st7735_WriteReg(LCD_REG_58, 0x05);
  /* Column addr set, 4 args, no delay: XSTART = 0, XEND = 127 */
  LCD_IO_WriteReg(LCD_REG_42);
  data = 0x00;
  LCD_IO_WriteMultipleData(&data, 1);
  LCD_IO_WriteMultipleData(&data, 1);
  LCD_IO_WriteMultipleData(&data, 1);
  data = 0x7F;
  LCD_IO_WriteMultipleData(&data, 1);
  /* Row addr set, 4 args, no delay: YSTART = 0, YEND = 159 */
  LCD_IO_WriteReg(LCD_REG_43);
  data = 0x00;
  LCD_IO_WriteMultipleData(&data, 1);
  LCD_IO_WriteMultipleData(&data, 1);
  LCD_IO_WriteMultipleData(&data, 1);
  data = 0x9F;
  LCD_IO_WriteMultipleData(&data, 1);
  /* Magical unicorn dust, 16 args, no delay */
  st7735_WriteReg(LCD_REG_224, 0x02); 
  st7735_WriteReg(LCD_REG_224, 0x1c);  
  st7735_WriteReg(LCD_REG_224, 0x07); 
  st7735_WriteReg(LCD_REG_224, 0x12);
  st7735_WriteReg(LCD_REG_224, 0x37);  
  st7735_WriteReg(LCD_REG_224, 0x32);  
  st7735_WriteReg(LCD_REG_224, 0x29);  
  st7735_WriteReg(LCD_REG_224, 0x2d);
  st7735_WriteReg(LCD_REG_224, 0x29);  
  st7735_WriteReg(LCD_REG_224, 0x25);  
  st7735_WriteReg(LCD_REG_224, 0x2B);  
  st7735_WriteReg(LCD_REG_224, 0x39);  
  st7735_WriteReg(LCD_REG_224, 0x00);  
  st7735_WriteReg(LCD_REG_224, 0x01);  
  st7735_WriteReg(LCD_REG_224, 0x03);  
  st7735_WriteReg(LCD_REG_224, 0x10);
  /* Sparkles and rainbows, 16 args, no delay */
  st7735_WriteReg(LCD_REG_225, 0x03);
  st7735_WriteReg(LCD_REG_225, 0x1d);  
  st7735_WriteReg(LCD_REG_225, 0x07);  
  st7735_WriteReg(LCD_REG_225, 0x06);
  st7735_WriteReg(LCD_REG_225, 0x2E);  
  st7735_WriteReg(LCD_REG_225, 0x2C);  
  st7735_WriteReg(LCD_REG_225, 0x29);  
  st7735_WriteReg(LCD_REG_225, 0x2D);
  st7735_WriteReg(LCD_REG_225, 0x2E);  
  st7735_WriteReg(LCD_REG_225, 0x2E);  
  st7735_WriteReg(LCD_REG_225, 0x37);  
//.........这里部分代码省略.........

开发者ID:Bit-Embedded-3，项目名称:smart_glove，代码行数:101，代码来源:st7735.c

示例20: st7735_WriteReg

/**
  * @brief  Writes to the selected LCD register.
  * @param  LCDReg: Address of the selected register.
  * @param  LCDRegValue: value to write to the selected register.
  * @retval None
  */
void st7735_WriteReg(uint8_t LCDReg, uint8_t LCDRegValue)
{
  LCD_IO_WriteReg(LCDReg);
  LCD_IO_WriteMultipleData(&LCDRegValue, 1);
}

开发者ID:Bit-Embedded-3，项目名称:smart_glove，代码行数:11，代码来源:st7735.c

注：本文中的LCD_IO_WriteReg函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ LCD_Init函数代码示例发布时间：2022-05-30

C++ LCD_GetYSize函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18239|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9667|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8453|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9383|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8425|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7858|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ LCD_IO_WriteReg函数代码示例

示例1: st7735_DisplayOff

示例2: st7735_SetCursor

示例3: spfd5408_WriteReg

示例4: ili9325_DrawBitmap

示例5: ili9325_WriteReg

示例6: LCD_IO_ReadData

示例7: LCD_IO_ReadData

示例8: ili9325_DrawVLine

示例9: spfd5408_DrawVLine

示例10: ili9325_ReadReg

示例11: ili9325_WritePixel

示例12: spfd5408_WritePixel

示例13: ili9325_ReadPixel

示例14: st7735_SetDisplayWindow

示例15: ili9325_DrawHLine

示例16: u8g_com_stm32duino_fsmc_fn

示例17: ili9325_DrawRGBImage

示例18: spfd5408_DrawHLine

示例19: st7735_Init

示例20: st7735_WriteReg

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

CVE-2022-36900

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053