C++ LCD_LOG_SetHeader函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中LCD_LOG_SetHeader函数的典型用法代码示例。如果您正苦于以下问题：C++ LCD_LOG_SetHeader函数的具体用法？C++ LCD_LOG_SetHeader怎么用？C++ LCD_LOG_SetHeader使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了LCD_LOG_SetHeader函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: Image_Browser

static uint8_t Image_Browser (char* path)
{
  FRESULT res;
  uint8_t ret = 1;
  FILINFO fno;
  DIR dir;
  char *fn;
  uint8_t key = 0;
  
  res = f_opendir(&dir, path);
  if (res == FR_OK) {
    
    for (;;) {
      res = f_readdir(&dir, &fno);
      if (res != FR_OK || fno.fname[0] == 0) break;
      if (fno.fname[0] == '.') continue;

      fn = fno.fname;
 
      if (fno.fattrib & AM_DIR) 
      {
        continue;
      } 
      else 
      {
        if((strstr(fn, "bmp")) || (strstr(fn, "BMP")))
        {
          res = f_open(&file, fn, FA_OPEN_EXISTING | FA_READ);
          Show_Image();
          USB_OTG_BSP_mDelay(100);
          ret = 0;
//          while((HCD_IsDeviceConnected(&USB_OTG_Core)))// && \
////            (STM_EVAL_PBGetState (BUTTON_KEY) == SET))
//          {
//            Toggle_Leds();
//          }
		  while(key != '1')
		  {
		  	SerialKeyPressed((uint8_t*)&key);
			Toggle_Leds();
		  }
		  key = 0;
          f_close(&file);
          
        }
      }
    }  
  }
  
  #ifdef USE_USB_OTG_HS 
  LCD_LOG_SetHeader(" USB OTG HS MSC Host");
#else
  LCD_LOG_SetHeader(" USB OTG FS MSC Host");
#endif
  LCD_LOG_SetFooter ("     USB Host Library v2.1.0" );
  LCD_UsrLog("> Disk capacity : %d Bytes\n", USBH_MSC_Param.MSCapacity * \
      USBH_MSC_Param.MSPageLength); 
  USBH_USR_ApplicationState = USH_USR_FS_READLIST;
  return ret;
}

开发者ID:wds315，项目名称:stm32f4_extboard_usb_examples，代码行数:60，代码来源:usbh_usr.c

示例2: HID_InitApplication

/**
  * @brief  HID application Init.
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_EXTI);
  
  /* Configure LED1*/
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  USBH_UsrLog("Starting HID Demo");
  HID_MenuInit();
}

开发者ID:MrZANE42，项目名称:verisure1512，代码行数:40，代码来源:main.c

示例3: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
    
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MSC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Initialize menu and MSC process */
  USBH_UsrLog("Starting MSC Demo");
  Menu_Init();
}

开发者ID:451506709，项目名称:automated_machine，代码行数:31，代码来源:main.c

示例4: USBD_USR_Init

/**
* @brief  USBD_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBD_USR_Init(void)
{  
  /* Initialize LEDs */
  STM_EVAL_LEDInit(LED1);
  STM_EVAL_LEDInit(LED2);
  STM_EVAL_LEDInit(LED3);
  STM_EVAL_LEDInit(LED4);   
  
  /* Initialize the LCD */
#if defined (USE_STM322xG_EVAL)
  STM322xG_LCD_Init();
#elif defined(USE_STM324xG_EVAL)
  STM324xG_LCD_Init();
#elif defined (USE_STM3210C_EVAL)
  STM3210C_LCD_Init();
#else
 #error "Missing define: Evaluation board (ie. USE_STM322xG_EVAL)"
#endif
  
  LCD_LOG_Init();
  
#ifdef USE_USB_OTG_HS 
  LCD_LOG_SetHeader(" USB OTG HS DFU Device");
#else
  LCD_LOG_SetHeader(" USB OTG FS DFU Device");
#endif
  
  LCD_UsrLog("> USB device library started.\n"); 
  LCD_LOG_SetFooter ("     USB Device Library v1.1.0" ); 
  
  /* Information panel */
  LCD_SetTextColor(Green);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 30, USER_INFORMATION1);
  LCD_SetTextColor(LCD_LOG_DEFAULT_COLOR);
}

开发者ID:Ghanyy，项目名称:PTM-STM32F4，代码行数:41，代码来源:usbd_usr.c

示例5: USBD_USR_Init

/**
* @brief  Displays the message on LCD on device lib initialization
* @param  None
* @retval None
*/
void USBD_USR_Init(void)
{
  /* Initialize LEDs */
  STM_EVAL_LEDInit(LED4);   

  /* Init LCD */
  STM32f4_Discovery_LCD_Init();
  
  LCD_LOG_Init();
  
#ifdef USE_USB_OTG_HS 
  LCD_LOG_SetHeader(" USB OTG HS MSC Device");
#else
  LCD_LOG_SetHeader(" USB OTG FS MSC Device");
#endif
  LCD_UsrLog("> USB device library started.\n"); 
  LCD_LOG_SetFooter ("     USB Device Library v1.1.0" );
  
  
  /* Information panel */
  LCD_SetTextColor(Green);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 42, USER_INFORMATION1);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 30, USER_INFORMATION2);
  LCD_SetTextColor(LCD_LOG_DEFAULT_COLOR);  
}

开发者ID:nhaberla，项目名称:stm32f4，代码行数:30，代码来源:usbd_usr.c

示例6: HID_InitApplication

/**
  * @brief  HID application Init
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);

  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  HID_MenuInit();
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:30，代码来源:main.c

示例7: DynamicSwitch_InitApplication

/**
  * @brief  DS application Init.
  * @param  None
  * @retval None
  */
static void DynamicSwitch_InitApplication(void)
{
    /* Configure Key Button */
    BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);

    /* Configure Joystick in EXTI mode */
    BSP_JOY_Init(JOY_MODE_EXTI);

    /* Configure LED1, LED2, LED3 and LED4 */
    BSP_LED_Init(LED1);
    BSP_LED_Init(LED2);
    BSP_LED_Init(LED3);
    BSP_LED_Init(LED4);

    /* Initialize the LCD */
    BSP_LCD_Init();

    /* Initialize the LCD Log module */
    LCD_LOG_Init();

#ifdef USE_USB_HS
    LCD_LOG_SetHeader((uint8_t *)" USB HS DynamicSwitch Host");
#else
    LCD_LOG_SetHeader((uint8_t *)" USB FS DynamicSwitch Host");
#endif

    LCD_UsrLog("USB Host library started.\n");

    /* Start Dynamic Switch Interface */
    LCD_UsrLog("Starting DynamicSwitch Demo\n");
    LCD_UsrLog("Plug your device To Continue...\n");
}

开发者ID:PaxInstruments，项目名称:STM32CubeF4，代码行数:37，代码来源:main.c

示例8: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);

  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);

  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);

  /* Initialize the LCD */
  BSP_LCD_Init();
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_SelectLayer(0);

  /* Init the LCD Log module */
  LCD_LOG_Init();

#ifdef USE_USB_HS
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MSC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
#endif

  LCD_UsrLog("USB Host library started.\n");

  /* Initialize menu and MSC process */
  USBH_UsrLog("Starting MSC Demo");
  Menu_Init();
}

开发者ID:Joe-Merten，项目名称:Stm32-Tools-Evaluation，代码行数:39，代码来源:main.c

示例9: USBH_USR_Init

/**
* @brief  USBH_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBH_USR_Init(void)
{
  static uint8_t startup = 0;  
  
  if(startup == 0 )
  {
    startup = 1;
    /* Configure the LEDs */
    STM_EVAL_LEDInit(LED1);
    STM_EVAL_LEDInit(LED2);
    STM_EVAL_LEDInit(LED3); 
    STM_EVAL_LEDInit(LED4); 
    
    STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_GPIO);
    
#ifdef USE_STM3210C_EVAL
    STM3210C_LCD_Init();  
#else
    STM322xG_LCD_Init();
#endif
    LCD_LOG_Init();
#ifdef USE_USB_OTG_HS 
    LCD_LOG_SetHeader(" USB OTG HS HID Host");
#else
    LCD_LOG_SetHeader(" USB OTG FS HID Host");
#endif
    LCD_UsrLog("> USB Host library started.\n"); 
    LCD_LOG_SetFooter ("     USB Host Library v2.0.0" );
  }
}

开发者ID:Seok-Jung，项目名称:STM32F207，代码行数:36，代码来源:usbh_usr.c

示例10: DynamicSwitch_InitApplication

/**
  * @brief  DS application Init.
  * @param  None
  * @retval None
  */
static void DynamicSwitch_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);                 
  
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB HS DynamicSwitch Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB FS DynamicSwitch Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Dynamic Switch Interface */
  LCD_UsrLog("Starting DynamicSwitch Demo\n");
  LCD_UsrLog("Plug your device To Continue...\n");
}

开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:40，代码来源:main.c

示例11: HID_InitApplication

/**
  * @brief  HID application Init.
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  USBH_UsrLog("Starting HID Demo");
  HID_MenuInit();
}

开发者ID:PaxInstruments，项目名称:STM32CubeF2，代码行数:37，代码来源:main.c

示例12: DUAL_InitApplication

/**
  * @brief  DUALCORE application Init.
  * @param  None
  * @retval None
  */
static void DUAL_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);                
  
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG DualCore Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start DualCore Interface */
  USBH_UsrLog("Initializing hardware....");
  DUAL_MenuInit(); 
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:36，代码来源:main.c

示例13: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start MSC Interface */
  USBH_UsrLog("Starting MSC Demo");
  
  Menu_Init();
}

开发者ID:Lembed，项目名称:STM32CubeF1-mirrors，代码行数:34，代码来源:main.c

示例14: CDC_InitApplication

/**
  * @brief  CDC application Init
  * @param  None
  * @retval None
  */
static void CDC_InitApplication(void)
{
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_WAKEUP, BUTTON_MODE_GPIO);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
  BSP_LCD_SelectLayer(0);
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS CDC Host");
  LCD_UsrLog("USB Host library started.\n"); 
    
  /* Start CDC Interface */
  USBH_UsrLog("Starting CDC Demo");
  
  Menu_Init();
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:32，代码来源:main.c

示例15: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_WAKEUP, BUTTON_MODE_EXTI);
      
  /* Configure LED1 */
  BSP_LED_Init(LED1);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Initialize menu and MSC process */
  Menu_Init();
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:34，代码来源:main.c

示例16: DUAL_InitApplication

/**
  * @brief  DUALCORE application Init.
  * @param  None
  * @retval None
  */
static void DUAL_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG DualCore Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start DualCore Interface */
  USBH_UsrLog("Initializing hardware....");
  DUAL_MenuInit(); 
}

开发者ID:EarnestHein89，项目名称:STM32Cube_FW_F4，代码行数:33，代码来源:main.c

示例17: CDC_InitApplication

/**
  * @brief  CDC application Init.
  * @param  None
  * @retval None
  */
static void CDC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI); 
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS CDC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS CDC Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start CDC Interface */
  USBH_UsrLog("Starting CDC Demo");
  
  Menu_Init();
  /* Initialize microSD */
  if (SD_StorageInit() == 0)
  {
    SD_StorageParse();
  }
}

开发者ID:nidhiyanandh，项目名称:STM32Cube_FW_F4_V1.5.0_GCC_Makefile，代码行数:52，代码来源:main.c

示例18: MTP_InitApplication

/**
  * @brief  MTP application Init.
  * @param  None
  * @retval None
  */
static void MTP_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);              
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialisation */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /*Selects the LCD Layer*/
  BSP_LCD_SelectLayer(1);
  
  /*Enables the display*/
  BSP_LCD_DisplayOn();
  
  /*Init the LCD Log module*/
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MTP Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MTP Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start MTP Interface */
  USBH_UsrLog("Starting MTP Demo");
  
  /* Init Audio interface */
  AUDIO_Init();
  
  /* Start MTP Interface */
  MTP_MenuInit();
}

开发者ID:EarnestHein89，项目名称:STM32Cube_FW_F4，代码行数:51，代码来源:main.c

示例19: Log_demo

/**
  * @brief  LCD Log demo 
  * @param  None
  * @retval None
  */
void Log_demo(void)
{ 
  JOYState_TypeDef JoyState = JOY_NONE;
  uint8_t i = 0;
  
  /* Wait For User inputs */
  while(CheckForUserInput() == 0);
  
  BSP_JOY_Init(JOY_MODE_GPIO);
  
  /* Initialize LCD Log module */
  LCD_LOG_Init();
  
  /* Show Header and Footer texts */
  LCD_LOG_SetHeader((uint8_t *)"Log Example");
  LCD_LOG_SetFooter((uint8_t *)"Use Joystick to scroll up/down");
  
  /* Output User logs */
  for (i = 0; i < 10; i++)
  {
    LCD_UsrLog ("This is Line %d \n", i);
  }
  
  HAL_Delay(2000);
  
  /* Clear Old logs */
  LCD_LOG_ClearTextZone();
  
  /* Output new user logs */
  for (i = 0; i < 30; i++)
  {
    LCD_UsrLog ("This is Line %d \n", i);
  }
  
  /* Check for joystick user input for scroll (back and forward) */
  while (1)
  {
    JoyState = BSP_JOY_GetState();
    switch(JoyState)
    {
    case JOY_UP:
      LCD_LOG_ScrollBack();
      break;
      
    case JOY_DOWN:
      LCD_LOG_ScrollForward();
      break;          
      
    default:
      break;           
    }
    if(CheckForUserInput() > 0)
    {
      return;
    }    
    HAL_Delay (10);
  }
}

开发者ID:451506709，项目名称:automated_machine，代码行数:63，代码来源:log.c

示例20: USBH_USR_Init

/**
* @brief  USBH_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBH_USR_Init(void)
{
  static uint8_t startup = 0;  
  
  if(startup == 0 )
  {
    startup = 1;
    /* Configure the LEDs */
    STM_EVAL_LEDInit(LED3); 
    STM_EVAL_LEDInit(LED4); 
    
    STM_EVAL_PBInit(BUTTON_USER, BUTTON_MODE_GPIO);
       
    /* Initialize the LCD */
    LCD_Init();
    LCD_LayerInit();
    
    /* Set LCD background layer */
    LCD_SetLayer(LCD_BACKGROUND_LAYER);
    
    /* Set LCD transparency */
    LCD_SetTransparency(0);
    
    /* Set LCD foreground layer */
    LCD_SetLayer(LCD_FOREGROUND_LAYER);
    
    /* LTDC reload configuration */  
    LTDC_ReloadConfig(LTDC_IMReload);
    
    /* Enable the LTDC */
    LTDC_Cmd(ENABLE);
    
    /* LCD Log initialization */
    LCD_LOG_Init(); 
    
    
#ifdef USE_USB_OTG_HS 
    LCD_LOG_SetHeader("PDF Create");
#else
    LCD_LOG_SetHeader(" USB OTG FS MSC Host");
#endif
    LCD_UsrLog("> USB Host library started.\n"); 
    LCD_LOG_SetFooter ("     USB Host Library v2.1.0" );
  }
}

开发者ID:HuanDeng，项目名称:Qproject，代码行数:51，代码来源:usbh_usr.c

注：本文中的LCD_LOG_SetHeader函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ LCD_PrintString函数代码示例发布时间：2022-05-30

C++ LCD_LOG_Init函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18239|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9667|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8453|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9383|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8425|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7858|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ LCD_LOG_SetHeader函数代码示例

示例1: Image_Browser

示例2: HID_InitApplication

示例3: MSC_InitApplication

示例4: USBD_USR_Init

示例5: USBD_USR_Init

示例6: HID_InitApplication

示例7: DynamicSwitch_InitApplication

示例8: MSC_InitApplication

示例9: USBH_USR_Init

示例10: DynamicSwitch_InitApplication

示例11: HID_InitApplication

示例12: DUAL_InitApplication

示例13: MSC_InitApplication

示例14: CDC_InitApplication

示例15: MSC_InitApplication

示例16: DUAL_InitApplication

示例17: CDC_InitApplication

示例18: MTP_InitApplication

示例19: Log_demo

示例20: USBH_USR_Init

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

CVE-2022-36900

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053