C++ LCD_UsrLog函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中LCD_UsrLog函数的典型用法代码示例。如果您正苦于以下问题：C++ LCD_UsrLog函数的具体用法？C++ LCD_UsrLog怎么用？C++ LCD_UsrLog使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了LCD_UsrLog函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: USBH_USR_Init

/**
* @brief  USBH_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBH_USR_Init(void)
{
  static uint8_t startup = 0;  
  
  if(startup == 0 )
  {
    startup = 1;
    /* Configure the LEDs */
    STM_EVAL_LEDInit(LED3); 
    STM_EVAL_LEDInit(LED4); 
    
    STM_EVAL_PBInit(BUTTON_USER, BUTTON_MODE_GPIO);
       
    /* Initialize the LCD */
    LCD_Init();
    LCD_LayerInit();
    
    /* Set LCD background layer */
    LCD_SetLayer(LCD_BACKGROUND_LAYER);
    
    /* Set LCD transparency */
    LCD_SetTransparency(0);
    
    /* Set LCD foreground layer */
    LCD_SetLayer(LCD_FOREGROUND_LAYER);
    
    /* LTDC reload configuration */  
    LTDC_ReloadConfig(LTDC_IMReload);
    
    /* Enable the LTDC */
    LTDC_Cmd(ENABLE);
    
    /* LCD Log initialization */
    LCD_LOG_Init(); 
    
    
#ifdef USE_USB_OTG_HS 
    LCD_LOG_SetHeader("PDF Create");
#else
    LCD_LOG_SetHeader(" USB OTG FS MSC Host");
#endif
    LCD_UsrLog("> USB Host library started.\n"); 
    LCD_LOG_SetFooter ("     USB Host Library v2.1.0" );
  }
}

开发者ID:HuanDeng，项目名称:Qproject，代码行数:51，代码来源:usbh_usr.c

示例2: Audio_InitApplication

/**
  * @brief  Audio application Init.
  * @param  None
  * @retval None
  */
static void Audio_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);               
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1 and LED3 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED3);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS Audio Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS Audio Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Audio Interface */
  USBH_UsrLog("Starting Audio Demo");
  AUDIO_MenuInit();
  
  /* Initialize the microSD */
  if(SD_StorageInit() == 0)
  {
    SD_StorageParse();
  }
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:50，代码来源:main.c

示例3: MTP_ExploreWavFile

/**
  * @brief  Explores Wav Files. 
  * @param  None
  * @retval Returns 0 if OK, otherwise 1.
  */
uint8_t MTP_ExploreWavFile(void)
{
  uint8_t ret = 1;
  uint32_t index;
  MTP_ObjectInfoTypedef objectinfo;
  
  MTP_Init();
  
  if(USBH_MTP_IsReady(&hUSBHost) > 0)
  {
    LCD_UsrLog("\nAvailable wav files:\n");
 
    /* Get Available WAV files number */
    if((NumObs = MTP_GetWavObjectNumber()) > 0)
    {
      /* Get objects handlers */
      if(MTP_GetWavObjectHandles() == 0)
      {
        ret = 0; 
        
        for (index = 0; index < NumObs; index ++)
        {
          if( USBH_MTP_GetObjectInfo (&hUSBHost, 
                                      WavHandles.Handler[index], 
                                      &objectinfo) == USBH_OK)
            
          {
            LCD_DbgLog(" %lu- %s\n", index, objectinfo.Filename);
          }
          else
          {
            ret = 1; 
          }
        }
      }
    }
  }
  else
  {
    LCD_ErrLog("MTP Device Not yet ready...\n");
  }
  
  return ret;
}

开发者ID:z80，项目名称:stm32f429，代码行数:49，代码来源:mtp.c

示例4: main

int main(void)
{
  extern uint32_t SystemCoreClock;

  //HAL init, etc
  common_init();

  //System clock config (200 MHz)
  SystemClock_Config();

  //LCD, SDRAM, DMA2D init.
  lcd_init();

  LCD_LOG_Init();
  LCD_LOG_SetHeader( ( uint8_t* )"LCD LOG" );
  LCD_UsrLog( "LOG is ready\n" );
  LCD_UsrLog( "MCU runs at %lu MHz\n", SystemCoreClock / 1000000 );

  LCD_UsrLog( "Define threads\n" );

  //Init on BTN pressed
  if( BSP_PB_GetState( BUTTON_KEY ) )
  {
    //KEY pressed
    LCD_UsrLog( "AF\n" );

    LCD_UsrLog( "Done!\n" );
    while(1)
    {
      //Do nothing
    }
  }
  else
  {
    //Normal mode
  }

  LCD_UsrLog( "Create threads\n" );
  tasks_init();
  

  LCD_UsrLog( "Starting OS kernel...\n" );
  osKernelStart();

  return 0;
}

开发者ID:VGeo，项目名称:stm32f746_fw_loader，代码行数:46，代码来源:main.c

示例5: LCD_Config

/**
  * @brief  LCD configuration.
  * @param  None
  * @retval None
  */
static void LCD_Config(void)
{
  /* LCD Initialization */ 
  BSP_LCD_Init();

  /* LCD Layers Initialization */ 
  BSP_LCD_LayerDefaultInit(LCD_FOREGROUND_LAYER, (LCD_FRAME_BUFFER + BUFFER_OFFSET));
  
  /* Configure the transparency for foreground : Increase the transparency */
  BSP_LCD_SetTransparency(LCD_BACKGROUND_LAYER, 0);
  BSP_LCD_SelectLayer(LCD_FOREGROUND_LAYER);

  /* LCD Log initialization */
  LCD_LOG_Init(); 

  LCD_LOG_SetHeader((uint8_t *)"LTDC Application");
  LCD_UsrLog("> USB Host library started.\n"); 
  LCD_LOG_SetFooter ((uint8_t *)"     USB Host Library V3.2.0" );
}

开发者ID:eemei，项目名称:library-stm32f4，代码行数:24，代码来源:main.c

示例6: AUDIO_InitApplication

/**
  * @brief  Audio Application Init.
  * @param  None
  * @retval None
  */
static void AUDIO_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);              
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)"Audio Playback and Record Application");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Audio interface */
  USBH_UsrLog("Starting Audio Demo");
  
  /* Init Audio interface */
  AUDIO_PLAYER_Init();
  
  /* Start Audio interface */
  AUDIO_MenuInit();
}

开发者ID:eemei，项目名称:library-stm32f4，代码行数:47，代码来源:main.c

示例7: MSC_InitApplication

/**
  * @brief  MSC application Init.
  * @param  None
  * @retval None
  */
static void MSC_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Selects the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enables the display */
  BSP_LCD_DisplayOn();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MSC Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MSC Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start MSC Interface */
  USBH_UsrLog("Starting MSC Demo");
  
  Menu_Init();
}

开发者ID:eemei，项目名称:library-stm32f4，代码行数:47，代码来源:main.c

示例8: BSP_Config

/**
  * @brief  Configurates the BSP.
  * @param  None
  * @retval None
  */
static void BSP_Config(void)
{
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Set Systick Interrupt to the highest priority */
  HAL_NVIC_SetPriority(SysTick_IRQn, 0x0, 0x0);
  
  /* Init IO Expander */
  BSP_IO_Init();
  
  /* Enable IO Expander interrupt for ETH MII pin */
  BSP_IO_ConfigPin(MII_INT_PIN, IO_MODE_IT_FALLING_EDGE);

#ifdef USE_LCD

  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Layers */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS);
  
  /* Set LCD Foreground Layer  */
  BSP_LCD_SelectLayer(1);
  
  BSP_LCD_SetFont(&LCD_DEFAULT_FONT);
  
  /* Initialize LCD Log module */
  LCD_LOG_Init();
  
  /* Show Header and Footer texts */
  LCD_LOG_SetHeader((uint8_t *)"Ethernet IAP Application");
  LCD_LOG_SetFooter((uint8_t *)"STM324x9I-EVAL board");
  
  LCD_UsrLog ("  State: Ethernet Initialization ...\n");

#endif
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:46，代码来源:main.c

示例9: USBH_USR_Init

/**
* @brief  USBH_USR_Init
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBH_USR_Init(void)
{
  static uint8_t startup = 0;

  if(startup == 0 )
  {
    startup = 1;


    /*
    STM_EVAL_LEDInit(LED1);
    STM_EVAL_LEDInit(LED2);
    STM_EVAL_LEDInit(LED3);
    STM_EVAL_LEDInit(LED4);

    STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_GPIO);

#if defined (USE_STM322xG_EVAL)
  STM322xG_LCD_Init();
#elif defined(USE_STM324xG_EVAL)
  STM324xG_LCD_Init();
#elif defined (USE_STM3210C_EVAL)
  STM3210C_LCD_Init();
#else
 #error "Missing define: Evaluation board (ie. USE_STM322xG_EVAL)"
#endif

    LCD_LOG_Init();

#ifdef USE_USB_OTG_HS
    LCD_LOG_SetHeader(" USB OTG HS MSC Host");
#else
    LCD_LOG_SetHeader(" USB OTG FS MSC Host");
#endif
    LCD_UsrLog("> USB Host library started.\n");
    LCD_LOG_SetFooter ("     USB Host Library v2.1.0" );
    */
  LCD_UsrLog("> USB Host library started.\n");
  }
}

开发者ID:greentechhobby，项目名称:GES_SolarMPPT，代码行数:46，代码来源:usbh_usr.c

示例10: BSP_Config

/**
  * @brief  Initializes the STM324xG-EVAL's LCD and LEDs resources.
  * @param  None
  * @retval None
  */
static void BSP_Config(void)
{  
  GPIO_InitTypeDef GPIO_InitStructure;
  
  /* Enable PB14 to IT mode: Ethernet Link interrupt */ 
  __HAL_RCC_GPIOB_CLK_ENABLE();
  GPIO_InitStructure.Pin = GPIO_PIN_14;
  GPIO_InitStructure.Mode = GPIO_MODE_IT_FALLING;
  GPIO_InitStructure.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
 
  /* Enable EXTI Line interrupt */
  HAL_NVIC_SetPriority(EXTI15_10_IRQn, 0x5, 0x0);
  HAL_NVIC_EnableIRQ(EXTI15_10_IRQn); 
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Set Systick Interrupt to the highest priority */
  HAL_NVIC_SetPriority(SysTick_IRQn, 0x0, 0x0);
 
#ifdef USE_LCD  
  
  /* Initialize the STM324xG-EVAL's LCD */
  BSP_LCD_Init();

  /* Initialize LCD Log module */
  LCD_LOG_Init();  

  /* Show Header and Footer texts */
  LCD_LOG_SetHeader((uint8_t *)"Ethernet IAP Application");
  LCD_LOG_SetFooter((uint8_t *)"STM324xG-EVAL board");
  
  LCD_UsrLog("  State: Ethernet Initialization ...\n");
  
#endif
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:45，代码来源:main.c

示例11: USBD_USR_Init

/**
* @brief  USBD_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBD_USR_Init(void)
{  
  /* Initialize LEDs */
  STM_EVAL_LEDInit(LED1);
  STM_EVAL_LEDInit(LED2);
  STM_EVAL_LEDInit(LED3);
  STM_EVAL_LEDInit(LED4);   
  
  /* Initialize the LCD */
#if defined (USE_STM322xG_EVAL)
  STM322xG_LCD_Init();
#elif defined(USE_STM324xG_EVAL)
  STM324xG_LCD_Init();
#elif defined (USE_STM3210C_EVAL)
  STM3210C_LCD_Init();
#else
 #error "Missing define: Evaluation board (ie. USE_STM322xG_EVAL)"
#endif

  LCD_LOG_Init();
  
#ifdef USE_USB_OTG_HS 
  LCD_LOG_SetHeader(" USB OTG HS AUDIO Device");
#else
  LCD_LOG_SetHeader(" USB OTG FS AUDIO Device");
#endif
  LCD_UsrLog("> USB device library started.\n"); 
  LCD_LOG_SetFooter ("     USB Device Library v1.1.0" ); 
  
  /* Information panel */
  LCD_SetTextColor(Green);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 48, USER_INFORMATION1);
  LCD_SetTextColor(LCD_LOG_DEFAULT_COLOR); 

  /* Information panel */
  LCD_SetTextColor(Green);
  LCD_DisplayStringLine( LCD_PIXEL_HEIGHT - 32, USER_INFORMATION2);
  LCD_SetTextColor(LCD_LOG_DEFAULT_COLOR);   
}

开发者ID:Ghanyy，项目名称:PTM-STM32F4，代码行数:45，代码来源:usbd_usr.c

示例12: BSP_Config

/**
  * @brief  Initializes the LCD and LEDs resources.
  * @param  None
  * @retval None
  */
static void BSP_Config(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;
   
  /* Enable PB14 to IT mode: Ethernet Link interrupt */ 
  __GPIOB_CLK_ENABLE(); 
  GPIO_InitStructure.Pin = GPIO_PIN_14;
  GPIO_InitStructure.Mode = GPIO_MODE_IT_FALLING;
  GPIO_InitStructure.Pull = GPIO_NOPULL ;
  HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
  
  /* Enable EXTI Line interrupt */
  HAL_NVIC_SetPriority(EXTI15_10_IRQn, 0xF, 0);
  HAL_NVIC_EnableIRQ(EXTI15_10_IRQn);
  
  /* Initialize LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
#ifdef USE_LCD
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  BSP_LCD_SetFont(&LCD_DEFAULT_FONT);
  
  /* Initialize LCD Log module */
  LCD_LOG_Init();
  
  /* Show Header and Footer texts */
  LCD_LOG_SetHeader((uint8_t *)"Webserver Application");
  LCD_LOG_SetFooter((uint8_t *)"STM324xG-EVAL board");
  
  LCD_UsrLog ("  State: Ethernet Initialization ...\n");
#endif
}

开发者ID:chsigi，项目名称:blindschleiche，代码行数:43，代码来源:main.c

示例13: BSP_Config

/**
  * @brief  Initializes the STM32756G-EVAL's LCD and LEDs resources.
  * @param  None
  * @retval None
  */
static void BSP_Config(void)
{
    /* Configure LED1, LED2, LED3 and LED4 */
    BSP_LED_Init(LED1);
    BSP_LED_Init(LED2);
    BSP_LED_Init(LED3);
    BSP_LED_Init(LED4);

    /* Init MFX */
    BSP_IO_Init();

    /* Enable MFX interrupt for ETH MII pin */
    BSP_IO_ConfigPin(MII_INT_PIN, IO_MODE_IT_FALLING_EDGE);

#ifdef USE_LCD

    /* Initialize the LCD */
    BSP_LCD_Init();

    /* Initialize the LCD Layers */
    BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS);

    /* Set LCD Foreground Layer  */
    BSP_LCD_SelectLayer(1);

    BSP_LCD_SetFont(&LCD_DEFAULT_FONT);

    /* Initialize LCD Log module */
    LCD_LOG_Init();

    /* Show Header and Footer texts */
    LCD_LOG_SetHeader((uint8_t *)"Webserver Application Socket API");
    LCD_LOG_SetFooter((uint8_t *)"STM32756G-EVAL board");

    LCD_UsrLog ("  State: Ethernet Initialization ...\n");

#endif
}

开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:43，代码来源:main.c

示例14: Audio_InitApplication

/**
  * @brief  Audio application Init.
  * @param  None
  * @retval None
  */
static void Audio_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);               
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS Audio Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS Audio Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start Audio Interface */
  USBH_UsrLog("Starting Audio Demo");
  AUDIO_MenuInit();
  
  /* Initialize the microSD */
  if(SD_StorageInit() == 0)
  {
    SD_StorageParse();
  }
}

开发者ID:451506709，项目名称:automated_machine，代码行数:43，代码来源:main.c

示例15: MTP_InitApplication

/**
  * @brief  MTP application Init.
  * @param  None
  * @retval None
  */
static void MTP_InitApplication(void)
{
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);              
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1, LED2, LED3 and LED4 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* Init the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS MTP Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS MTP Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start MTP Interface */
  USBH_UsrLog("Starting MTP Demo");
  
  /* Init Audio interface */
  AUDIO_Init();
  
  /* Start MTP Interface */
  MTP_MenuInit();
}

开发者ID:451506709，项目名称:automated_machine，代码行数:42，代码来源:main.c

示例16: DUAL_InitApplication

/**
  * @brief  DUALCORE application Init.
  * @param  None
  * @retval None
  */
static void DUAL_InitApplication(void)
{
  /* Configure KEY Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);                
  
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure the LEDs */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED2);
  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialisation */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /*Selects the LCD Layer*/
  BSP_LCD_SelectLayer(1);
  
  /*Enables the display*/
  BSP_LCD_DisplayOn();
  
  /*Init the LCD Log module*/
  LCD_LOG_Init();
  
  LCD_LOG_SetHeader((uint8_t *)" USB OTG DualCore Host");
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start DualCore Interface */
  USBH_UsrLog("Initializing hardware....");
  DUAL_MenuInit(); 
}

开发者ID:Bosvark，项目名称:STM32Cube_FW_F4_V1.1.0，代码行数:42，代码来源:main.c

示例17: HID_InitApplication

/**
  * @brief  HID application Init.
  * @param  None
  * @retval None
  */
static void HID_InitApplication(void)
{
  /* Configure Joystick in EXTI mode */
  BSP_JOY_Init(JOY_MODE_EXTI);
  
  /* Configure LED1 and LED3 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED3);
  
  /* Initialize the LCD */
  BSP_LCD_Init();
  
  /* LCD Layer Initialization */
  BSP_LCD_LayerDefaultInit(1, LCD_FB_START_ADDRESS); 
  
  /* Select the LCD Layer */
  BSP_LCD_SelectLayer(1);
  
  /* Enable the display */
  BSP_LCD_DisplayOn();
  
  /* Initialize the LCD Log module */
  LCD_LOG_Init();
  
#ifdef USE_USB_HS 
  LCD_LOG_SetHeader((uint8_t *)" USB OTG HS HID Host");
#else
  LCD_LOG_SetHeader((uint8_t *)" USB OTG FS HID Host");
#endif
  
  LCD_UsrLog("USB Host library started.\n"); 
  
  /* Start HID Interface */
  USBH_UsrLog("Starting HID Demo");
  HID_MenuInit();
}

开发者ID:MrZANE42，项目名称:verisure1512，代码行数:41，代码来源:main.c

示例18: USBH_USR_Init

/**
* @brief  USBH_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBH_USR_Init(void)
{
  static uint8_t startup = 0;  
  
  if (startup == 0 ) {
    startup = 1;
    /* Configure the LEDs */ 
    STM_EVAL_LEDInit(LED4); 
    
    STM_EVAL_PBInit(BUTTON_USER, BUTTON_MODE_GPIO);
    
    STM32f4_Discovery_LCD_Init();

    LCD_LOG_Init();
      
#ifdef USE_USB_OTG_HS 
    LCD_LOG_SetHeader(" USB OTG HS MSC Host");
#else
    LCD_LOG_SetHeader(" USB OTG FS MSC Host");
#endif
    LCD_UsrLog("> USB Host library started.\n"); 
    LCD_LOG_SetFooter ("     USB Host Library v2.1.0" );
  }
}

开发者ID:nhaberla，项目名称:stm32f4，代码行数:30，代码来源:usbh_usr_lcd.c

示例19: USBD_USR_DeviceResumed

/**
* @brief  USBD_USR_DeviceResumed 
*         Displays the message on LCD on device resume Event
* @param  None
* @retval None
*/
void USBD_USR_DeviceResumed(void)
{
    LCD_UsrLog("> USB Device in Idle Mode.\n");
  /* Users can do their application actions here for the USB-Reset */
}

开发者ID:Ghanyy，项目名称:PTM-STM32F4，代码行数:11，代码来源:usbd_usr.c

示例20: Explore_Disk

/**
  * @brief  Displays disk content.
  * @param  path: Pointer to root path
  * @param  recu_level: Disk content level 
  * @retval Operation result
  */
FRESULT Explore_Disk(char *path, uint8_t recu_level)
{
  FRESULT res = FR_OK;
  FILINFO fno;
  DIR dir;
  char *fn;
  char tmp[14];
  uint8_t line_idx = 0;
  
#if _USE_LFN
  static char lfn[_MAX_LFN + 1];   /* Buffer to store the LFN */
  fno.lfname = lfn;
  fno.lfsize = sizeof lfn;
#endif
  
  res = f_opendir(&dir, path);
  if(res == FR_OK) 
  {
    while(USBH_MSC_IsReady(&hUSBHost))
    {
      res = f_readdir(&dir, &fno);
      if(res != FR_OK || fno.fname[0] == 0) 
      {
        break;
      }
      if(fno.fname[0] == '.')
      {
        continue;
      }
      
#if _USE_LFN
      fn = *fno.lfname ? fno.lfname : fno.fname;
#else
      fn = fno.fname;
#endif
      strcpy(tmp, fn); 
      
      line_idx++;
      if(line_idx > 9)
      {
        line_idx = 0;
        LCD_UsrLog("> Press [Key] To Continue.\n");
        
        /* KEY Button in polling */
        while(BSP_PB_GetState(BUTTON_KEY) != RESET)
        {
          /* Wait for User Input */
        }
      } 
      
      if(recu_level == 1)
      {
        LCD_DbgLog("   |__");
      }
      else if(recu_level == 2)
      {
        LCD_DbgLog("   |   |__");
      }
      if((fno.fattrib & AM_MASK) == AM_DIR)
      {
        strcat(tmp, "\n"); 
        LCD_UsrLog((void *)tmp);
        Explore_Disk(fn, 2);
      }
      else
      {
        strcat(tmp, "\n"); 
        LCD_DbgLog((void *)tmp);
      }
      
      if(((fno.fattrib & AM_MASK) == AM_DIR)&&(recu_level == 2))
      {
        Explore_Disk(fn, 2);
      }
    }
    f_closedir(&dir);
	LCD_UsrLog("> Select an operation to Continue.\n" );
  }
  return res;
}

开发者ID:Lembed，项目名称:STM32CubeF1-mirrors，代码行数:86，代码来源:explorer.c

注：本文中的LCD_UsrLog函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ LCD_WrCmd函数代码示例发布时间：2022-05-30

C++ LCD_SetFont函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18235|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9666|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8453|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9382|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8425|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7857|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ LCD_UsrLog函数代码示例

示例1: USBH_USR_Init

示例2: Audio_InitApplication

示例3: MTP_ExploreWavFile

示例4: main

示例5: LCD_Config

示例6: AUDIO_InitApplication

示例7: MSC_InitApplication

示例8: BSP_Config

示例9: USBH_USR_Init

示例10: BSP_Config

示例11: USBD_USR_Init

示例12: BSP_Config

示例13: BSP_Config

示例14: Audio_InitApplication

示例15: MTP_InitApplication

示例16: DUAL_InitApplication

示例17: HID_InitApplication

示例18: USBH_USR_Init

示例19: USBD_USR_DeviceResumed

示例20: Explore_Disk

请发表评论

全部评论

上一篇：

下一篇：

PacktPublishing/Python-Machine-Learning-

BentoBoxWorld/AOneBlock: A OneBlock Mine

鲁东大学一米网:Win7系统USB驱动器RAM的操

matlab第二次作业 - 统计冷火

manur/MATLAB-git: A thin MATLAB wrapper

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053