C++ LCMDBG函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中LCMDBG函数的典型用法代码示例。如果您正苦于以下问题：C++ LCMDBG函数的具体用法？C++ LCMDBG怎么用？C++ LCMDBG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了LCMDBG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: mecha_sharp_panel_unblank

static int mecha_sharp_panel_unblank(struct msm_lcdc_panel_ops *ops)
{
	struct spi_msg set_brightness = {
                .cmd = 0x51,
                .len = 1,
                .data = (unsigned char *)&last_val,
	};

        LCMDBG("\n");
	if (color_enhancement == 0) {
		mecha_mdp_color_enhancement(mdp_pdata.mdp_dev);
		color_enhancement = 1;
	}
        mutex_lock(&panel_lock);
	qspi_send_9bit(&set_brightness);
	lcm_sharp_write_seq(sharp_turn_on_backlight,
	ARRAY_SIZE(sharp_turn_on_backlight));
        mutex_unlock(&panel_lock);
        return 0;
}

static int mecha_sharp_panel_blank(struct msm_lcdc_panel_ops *ops)
{
	LCMDBG("\n");
	mutex_lock(&panel_lock);
	lcm_sharp_write_seq(sharp_blank_seq, ARRAY_SIZE(sharp_blank_seq));
	hr_msleep(100);
	mutex_unlock(&panel_lock);
	return 0;
}

开发者ID:RoyFerry，项目名称:mecha-2.6.35-gb-mr，代码行数:30，代码来源:board-mecha-panel.c

示例2: mecha_init_panel

/*----------------------------------------------------------------------------*/
int __init mecha_init_panel(void)
{
	int ret;

        vreg_lcm_1v8 = vreg_get(0, "gp13");
        if (IS_ERR(vreg_lcm_1v8))
                return PTR_ERR(vreg_lcm_1v8);
        vreg_lcm_2v8 = vreg_get(0, "wlan2");
        if (IS_ERR(vreg_lcm_2v8))
                return PTR_ERR(vreg_lcm_2v8);


	LCMDBG("panel_type=%d\n", panel_type);
	if (panel_type & 0x8) {
		panel_rev = 1;
		panel_type &= 0x7;
	}
	switch (panel_type) {
	case PANEL_AUO:
#ifdef CONFIG_PANEL_SELF_REFRESH
		mdp_pdata.overrides |= MSM_MDP_RGB_PANEL_SELE_REFRESH;
		LCMDBG("MECHA AUO Panel:RGB_PANEL_SELE_REFRESH \n");
		mecha_auo_panel_ops.refresh_enable = mecha_auo_panel_refresh_enable;
		mecha_auo_panel_ops.refresh_disable = mecha_auo_panel_refresh_disable;
		msm_device_mdp.dev.platform_data = &mdp_pdata;
#endif
		mecha_lcdc_platform_data.timing = &mecha_auo_timing;
		mecha_lcdc_platform_data.panel_ops = &mecha_auo_panel_ops;
		break;
	case PANEL_SHARP:
	case PANEL_SHARP565:
		if (panel_type == PANEL_SHARP565)
			mdp_pdata.overrides |= MSM_MDP_DMA_PACK_ALIGN_LSB;
		msm_device_mdp.dev.platform_data = &mdp_pdata;
		mecha_lcdc_platform_data.timing = &mecha_sharp_timing;
		mecha_lcdc_platform_data.panel_ops = &mecha_sharp_panel_ops;
		break;
	default:
		return -EINVAL;
	}

	ret = platform_device_register(&msm_device_mdp);
	if (ret != 0)
		return ret;

	ret = platform_device_register(&mecha_lcdc_device);
	if (ret != 0)
		return ret;

	ret = platform_device_register(&mecha_backlight_pdev);
        if (ret)
                return ret;

	return 0;
}

开发者ID:RoyFerry，项目名称:mecha-2.6.35-gb-mr，代码行数:56，代码来源:board-mecha-panel.c

示例3: spade_init_panel

int __init spade_init_panel(void)
{
	int ret;

        vreg_lcm_1v8 = vreg_get(0, "gp13");
        if (IS_ERR(vreg_lcm_1v8))
                return PTR_ERR(vreg_lcm_1v8);
        vreg_lcm_2v8 = vreg_get(0, "wlan2");
        if (IS_ERR(vreg_lcm_2v8))
                return PTR_ERR(vreg_lcm_2v8);

	LCMDBG("panel_type=%d\n", panel_type);
	switch (panel_type) {
	case PANEL_AUO:
#ifdef CONFIG_PANEL_SELF_REFRESH
		mdp_pdata.overrides = MSM_MDP_RGB_PANEL_SELE_REFRESH,
		LCMDBG("ACE AUO Panel:RGB_PANEL_SELE_REFRESH \n");
		spade_auo_panel_ops.refresh_enable = spade_auo_panel_refresh_enable;
		spade_auo_panel_ops.refresh_disable = spade_auo_panel_refresh_disable;
#endif
		spade_lcdc_platform_data.timing = &spade_auo_timing;
		spade_lcdc_platform_data.panel_ops = &spade_auo_panel_ops;

		break;
	case PANEL_ID_SPADE_AUO_N90:
		spade_lcdc_platform_data.timing = &spade_auo_n90_timing;
		spade_lcdc_platform_data.panel_ops = &spade_auo_n90_panel_ops;
		break;
	case PANEL_SHARP:
	case PANEL_ID_SPADE_SHA_N90:
		spade_lcdc_platform_data.timing = &spade_sharp_timing;
		spade_lcdc_platform_data.panel_ops = &spade_sharp_panel_ops;
		break;
	default:
		return -EINVAL;
	}
	msm_device_mdp.dev.platform_data = &mdp_pdata;
	ret = platform_device_register(&msm_device_mdp);
	if (ret != 0)
		return ret;

	ret = platform_device_register(&spade_lcdc_device);
	if (ret != 0)
		return ret;

	ret = platform_device_register(&spade_backlight_pdev);
        if (ret)
                return ret;

	return 0;
}

开发者ID:LorDClockaN，项目名称:htc_spade_2.6.35，代码行数:51，代码来源:board-spade-panel.c

示例4: mecha_backlight_probe

static int mecha_backlight_probe(struct platform_device *pdev)
{
	int rc;

	rc = led_classdev_register(&pdev->dev, &mecha_backlight_led);
	if (rc)
		LCMDBG("backlight: failure on register led_classdev\n");

	rc = device_create_file(mecha_backlight_led.dev, &auto_attr);
	if (rc)
		LCMDBG("backlight: failure on create attr\n");

	return 0;
}

开发者ID:RoyFerry，项目名称:mecha-2.6.35-gb-mr，代码行数:14，代码来源:board-mecha-panel.c

示例5: amoled_panel_unblank

static int amoled_panel_unblank(struct msm_lcdc_panel_ops *panel_data)
{
	LCMDBG("%s\n", __func__);

	wake_lock(&panel_idle_lock);
	mutex_lock(&panel_lock);
	amoled_set_gamma_val(last_level);
	/* Display on */
	qspi_send_9bit(&unblank_msg);
	mutex_unlock(&panel_lock);
	wake_unlock(&panel_idle_lock);

	LCMDBG("%s: last_level = %d\n", __func__, last_level);
	led_trigger_event(amoled_lcd_backlight, LED_FULL);
	return 0;
}

开发者ID:12rafael，项目名称:jellytimekernel，代码行数:16，代码来源:panel-samsungwvga-s6e63m0.c

示例6: spade_sharp_panel_blank

static int spade_sharp_panel_blank(struct msm_lcdc_panel_ops *ops)
{
	LCMDBG("\n");
	spade_adjust_backlight(0);
	atomic_set(&lcm_init_done, 0);
        return 0;
}

开发者ID:LorDClockaN，项目名称:htc_spade_2.6.35，代码行数:7，代码来源:board-spade-panel.c

示例7: flyer_panel_power

static void flyer_panel_power(bool on_off)
{
	int gpio_lcm_en, gpio_lvds_on;

	if (panel_type != PANEL_ID_FLR_SMD_XB) {
		gpio_lcm_en = FLYER_LCM_3V3_EN_XC;
		gpio_lvds_on = FLYER_LVDS_ON_XC;
	} else {
		gpio_lcm_en = FLYER_LCM_3V3_EN;
		gpio_lvds_on = FLYER_LVDS_ON;
	}

	if (!!on_off) {
		LCMDBG("%s(%d):\n", __func__, on_off);
		vreg_enable(vreg_lcm_1v8);
		gpio_set_value(gpio_lcm_en, 1);
		if(panel_type == PANEL_ID_FLR_LG_XC || panel_type == PANEL_ID_FLR_LG_WS2)
			hr_msleep(50);
		else
			hr_msleep(90);
		gpio_set_value(gpio_lvds_on, 1);
	} else {
		gpio_set_value(gpio_lcm_en, 0);
		if(panel_type == PANEL_ID_FLR_LG_XC || panel_type == PANEL_ID_FLR_LG_WS2)
			hr_msleep(50);
		else
			hr_msleep(60);
		gpio_set_value(gpio_lvds_on, 0);
		vreg_disable(vreg_lcm_1v8);
	}

}

开发者ID:DooMLoRD，项目名称:HTC-Flyer-Kernel，代码行数:32，代码来源:board-flyer-panel.c

示例8: sonywvga_panel_blank

static int sonywvga_panel_blank(struct msm_lcdc_panel_ops *panel_data)
{
	uint8_t data[4] = {0, 0, 0, 0};
	LCMDBG("%s\n", __func__);

	mutex_lock(&panel_lock);

	blank_msg.cmd = 0x28;
	qspi_send_9bit(&blank_msg);
	blank_msg.cmd = 0x10;
	qspi_send_9bit(&blank_msg);
	hr_msleep(40);
	g_unblank_stage = 0;
	mutex_unlock(&panel_lock);
	sonywvga_panel_power(0);

	if (!is_sony_spi()) {
		data[0] = 5;
		data[1] = 0;
		data[3] = 1;
		microp_i2c_write(0x25, data, 4);
	}

	return 0;
}

开发者ID:12rafael，项目名称:jellytimekernel，代码行数:25，代码来源:panel-sonywvga-s6d16a0x21-7x30.c

示例9: samsung_oled_panel_init

static int samsung_oled_panel_init(struct msm_lcdc_panel_ops *ops)
{
	LCMDBG("%s()\n", __func__);

	amoled_panel_power(1);

	wake_lock(&panel_idle_lock);
	mutex_lock(&panel_lock);
	if (machine_is_passionc()) {
		/* FIXME: display team will clean up the below codes */
		if (system_rev == 0xC0 || system_rev == 0) /* for Passion#C EVT1 */
			lcm_write_tb(lcm_init_seq, ARRAY_SIZE(lcm_init_seq));
		else
			lcm_write_tb(lcm_init_seq, ARRAY_SIZE(lcm_init_666seq));
	} else {
		if (system_rev < 1)
			lcm_write_tb(lcm_init_seq, ARRAY_SIZE(lcm_init_seq));
		else
			lcm_write_tb(lcm_init_seq, ARRAY_SIZE(lcm_init_666seq));
	}
	gamma_table_bank_select();
	mutex_unlock(&panel_lock);
	wake_unlock(&panel_idle_lock);
	return 0;
}

开发者ID:LorDClockaN，项目名称:DesireC-eclair，代码行数:25，代码来源:board-amoled-panel.c

示例10: spade_adjust_backlight

static int spade_adjust_backlight(enum led_brightness val)
{
        uint8_t data[4] = {     /* PWM setting of microp, see p.8 */
                0x05,           /* Fading time; suggested: 5/10/15/20/25 */
                val,            /* Duty Cycle */
                0x00,           /* Channel H byte */
                0x20,           /* Channel L byte */
                };
	uint8_t shrink_br;

        mutex_lock(&panel_lock);
        if (val == 0)
                shrink_br = 0;
        else if (val <= 30)
                shrink_br = 7;
        else if ((val > 30) && (val <= 143))
                shrink_br = (91 - 7) * (val - 30) / (143 - 30) + 7;
        else
                shrink_br = (217 - 91) * (val - 143) / (255 - 143) + 91;
        data[1] = shrink_br;

        LCMDBG("(%d), shrink_br=%d\n", val, shrink_br);
        microp_i2c_write(0x25, data, sizeof(data));
        last_val = shrink_br ? shrink_br: last_val;
        mutex_unlock(&panel_lock);

	return shrink_br;
}

开发者ID:Akinus，项目名称:htc-kernel-msm7x30，代码行数:28，代码来源:board-spade-panel.c

示例11: spade_panel_sleep_in

/*----------------------------------------------------------------------------*/
int spade_panel_sleep_in(void)
{
	int ret;

	LCMDBG(", screen=%s\n", screen_on ? "on" : "off");
	if (screen_on)
		return 0;

	mutex_lock(&panel_lock);
	switch (panel_type) {
		case PANEL_AUO:
			spade_auo_panel_power(1);
			lcm_auo_write_seq(auo_sleep_in_seq,
				ARRAY_SIZE(auo_sleep_in_seq));
			ret = 0;
			break;
		case PANEL_SHARP:
			spade_sharp_panel_power(1);
			lcm_sharp_write_seq(sharp_uninit_seq,
				ARRAY_SIZE(sharp_uninit_seq));
			ret = 0;
			break;
		default:
			ret = -EINVAL;
			break;
	}
	mutex_unlock(&panel_lock);
	return ret;
}

开发者ID:Akinus，项目名称:htc-kernel-msm7x30，代码行数:30，代码来源:board-spade-panel.c

示例12: spade_auo_n90_panel_uninit

static int spade_auo_n90_panel_uninit(struct msm_lcdc_panel_ops *ops)
{
	LCMDBG("\n");
	mutex_lock(&panel_lock);
	spade_auo_panel_power(0);
	mutex_unlock(&panel_lock);
	return 0;
}

开发者ID:LorDClockaN，项目名称:htc_spade_2.6.35，代码行数:8，代码来源:board-spade-panel.c

示例13: mecha_sharp_panel_uninit

static int mecha_sharp_panel_uninit(struct msm_lcdc_panel_ops *ops)
{
        LCMDBG("\n");
        mutex_lock(&panel_lock);
        mecha_sharp_panel_power(0);
        mutex_unlock(&panel_lock);
        return 0;
}

开发者ID:RoyFerry，项目名称:mecha-2.6.35-gb-mr，代码行数:8，代码来源:board-mecha-panel.c

示例14: mecha_auo_panel_blank

static int mecha_auo_panel_blank(struct msm_lcdc_panel_ops *ops)
{
	LCMDBG("\n");
	mutex_lock(&panel_lock);
	lcm_auo_write_seq(auo_blank_seq, ARRAY_SIZE(auo_blank_seq));
	mutex_unlock(&panel_lock);
	return 0;
}

开发者ID:RoyFerry，项目名称:mecha-2.6.35-gb-mr，代码行数:8，代码来源:board-mecha-panel.c

示例15: spade_auo_panel_unblank

static int spade_auo_panel_unblank(struct msm_lcdc_panel_ops *ops)
{
	LCMDBG("\n");
	atomic_set(&lcm_init_done, 1);
	spade_adjust_backlight(last_val);

	return 0;
}

开发者ID:Akinus，项目名称:htc-kernel-msm7x30，代码行数:8，代码来源:board-spade-panel.c

示例16: mecha_auo_panel_power

static void mecha_auo_panel_power(bool on_off)
{
	if (!!on_off) {
		LCMDBG("%s(%d):\n", __func__, on_off);
		gpio_set_value(MECHA_LCD_RSTz, 1);
		udelay(500);
		gpio_set_value(MECHA_LCD_RSTz, 0);
		udelay(500);
		gpio_set_value(MECHA_LCD_RSTz, 1);
		hr_msleep(20);
		panel_gpio_switch(on_off);
	} else {
		LCMDBG("%s(%d):\n", __func__, on_off);
		gpio_set_value(MECHA_LCD_RSTz, 1);
		hr_msleep(70);
		panel_gpio_switch(on_off);
	}
}

开发者ID:RoyFerry，项目名称:mecha-2.6.35-gb-mr，代码行数:18，代码来源:board-mecha-panel.c

示例17: amoled_backlight_probe

static int amoled_backlight_probe(struct platform_device *pdev)
{
	int rc;
	amoled_backlight_led.brightness_set = samsung_brightness_set;
	rc = led_classdev_register(&pdev->dev, &amoled_backlight_led);
	if (rc)
		LCMDBG("backlight: failure on register led_classdev\n");
	return 0;
}

开发者ID:12rafael，项目名称:jellytimekernel，代码行数:9，代码来源:panel-samsungwvga-s6e63m0.c

示例18: spade_backlight_probe

static int spade_backlight_probe(struct platform_device *pdev)
{
	int rc;

	rc = led_classdev_register(&pdev->dev, &spade_backlight_led);
	if (rc)
		LCMDBG("backlight: failure on register led_classdev\n");
	return 0;
}

开发者ID:LorDClockaN，项目名称:htc_spade_2.6.35，代码行数:9，代码来源:board-spade-panel.c

示例19: spade_brightness_set

static void spade_brightness_set(struct led_classdev *led_cdev,
		enum led_brightness val)
{
	if (atomic_read(&lcm_init_done) == 0) {
		last_val = val ? val : last_val;
		LCMDBG(":lcm not ready, val=%d\n", val);
		return;
	}
	led_cdev->brightness = spade_adjust_backlight(val);
}

开发者ID:LorDClockaN，项目名称:htc_spade_2.6.35，代码行数:10，代码来源:board-spade-panel.c

示例20: spade_auo_n90_panel_init

static int spade_auo_n90_panel_init(struct msm_lcdc_panel_ops *ops)
{
	LCMDBG("\n");

	mutex_lock(&panel_lock);
	spade_auo_panel_power(1);
	lcm_auo_write_seq(auo_n90_init_seq, ARRAY_SIZE(auo_n90_init_seq));
	mutex_unlock(&panel_lock);
	return 0;
}

开发者ID:LorDClockaN，项目名称:htc_spade_2.6.35，代码行数:10，代码来源:board-spade-panel.c

注：本文中的LCMDBG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ LCM_PRINT函数代码示例发布时间：2022-05-30

C++ LCDsendCommand函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18235|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9666|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8453|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9382|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8425|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7857|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8410|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ LCMDBG函数代码示例

示例1: mecha_sharp_panel_unblank

示例2: mecha_init_panel

示例3: spade_init_panel

示例4: mecha_backlight_probe

示例5: amoled_panel_unblank

示例6: spade_sharp_panel_blank

示例7: flyer_panel_power

示例8: sonywvga_panel_blank

示例9: samsung_oled_panel_init

示例10: spade_adjust_backlight

示例11: spade_panel_sleep_in

示例12: spade_auo_n90_panel_uninit

示例13: mecha_sharp_panel_uninit

示例14: mecha_auo_panel_blank

示例15: spade_auo_panel_unblank

示例16: mecha_auo_panel_power

示例17: amoled_backlight_probe

示例18: spade_backlight_probe

示例19: spade_brightness_set

示例20: spade_auo_n90_panel_init

请发表评论

全部评论

上一篇：

下一篇：

PacktPublishing/Python-Machine-Learning-

BentoBoxWorld/AOneBlock: A OneBlock Mine

鲁东大学一米网:Win7系统USB驱动器RAM的操

matlab第二次作业 - 统计冷火

manur/MATLAB-git: A thin MATLAB wrapper

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053