• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ LE16函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中LE16函数的典型用法代码示例。如果您正苦于以下问题:C++ LE16函数的具体用法?C++ LE16怎么用?C++ LE16使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了LE16函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: utf8_to_ucs2_char

////TODO: Move away from rpc.c to some Windows-Linux-Incompatibility-Resolver.c
short utf8_to_ucs2_char (const unsigned char * input, const unsigned char ** end_ptr)
{
    *end_ptr = input;
    if (input[0] == 0)
        return -1;
    if (input[0] < 0x80) {
        *end_ptr = input + 1;
        return LE16(input[0]);
    }
    if ((input[0] & 0xE0) == 0xE0) {
        if (input[1] == 0 || input[2] == 0)
            return -1;
        *end_ptr = input + 3;
        return
            LE16((input[0] & 0x0F)<<12 |
            (input[1] & 0x3F)<<6  |
            (input[2] & 0x3F));
    }
    if ((input[0] & 0xC0) == 0xC0) {
        if (input[1] == 0)
            return -1;
        *end_ptr = input + 2;
        return
            LE16((input[0] & 0x1F)<<6  |
            (input[1] & 0x3F));
    }
    return -1;
}
开发者ID:angelkyo,项目名称:openwrt-maz1,代码行数:29,代码来源:rpc.c


示例2: logResponseVerbose

void logResponseVerbose(const char *const ePID, const BYTE *const hwid, const RESPONSE *const response, const PRINTFUNC p)
{
	char guidBuffer[GUID_STRING_LENGTH + 1];
	//SYSTEMTIME st;

	p("Protocol version                : %u.%u\n", (uint32_t)LE16(response->MajorVer), (uint32_t)LE16(response->MinorVer));
	p("KMS host extended PID           : %s\n", ePID);
	if (LE16(response->MajorVer) > 5)
#	ifndef _WIN32
		p("KMS host Hardware ID            : %016llX\n", (unsigned long long)BE64(*(uint64_t*)hwid));
#	else // _WIN32
		p("KMS host Hardware ID            : %016I64X\n", (unsigned long long)BE64(*(uint64_t*)hwid));
#	endif // WIN32

	uuid2StringLE(&response->CMID, guidBuffer);
	p("Client machine ID               : %s\n", guidBuffer);

	char mbstr[64];
	time_t st;

	st = fileTimeToUnixTime(&response->ClientTime);
	strftime(mbstr, sizeof(mbstr), "%Y-%m-%d %X", gmtime(&st));
	p("Client request timestamp (UTC)  : %s\n", mbstr);

	p("KMS host current active clients : %u\n", (uint32_t)LE32(response->Count));
	p("Renewal interval policy         : %u\n", (uint32_t)LE32(response->VLRenewalInterval));
	p("Activation interval policy      : %u\n", (uint32_t)LE32(response->VLActivationInterval));
}
开发者ID:galaxysd,项目名称:GalaxyCodeBases,代码行数:28,代码来源:output.c


示例3: CheckRpcRequest

static void CheckRpcRequest(const RPC_REQUEST *const Request, const unsigned int len, const uint_fast8_t _v)
{
	if (len >_Versions[_v].RequestSize + sizeof(RPC_REQUEST))
		logger("Warning: %u excess bytes in RPC request.\n",
				len - _Versions[_v].RequestSize + sizeof(RPC_REQUEST)
		);

	if (Request->ContextId)
		logger("Warning: Context id should be 0 but is %u.\n",
				(unsigned int)LE16(Request->ContextId)
		);

	if (Request->Opnum)
		logger("Warning: OpNum should be 0 but is %u.\n",
				(unsigned int)LE16(Request->Opnum)
		);

	if (LE32(Request->AllocHint) != len - sizeof(RPC_REQUEST) + sizeof(Request->Ndr))
		logger("Warning: Allocation hint should be %u but is %u.\n",
				len + sizeof(Request->Ndr),
				LE32(Request->AllocHint)
		);

	if (LE32(Request->Ndr.DataLength) != len - sizeof(RPC_REQUEST))
		logger("Warning: NDR32 data length field should be %u but is %u.\n",
				len - sizeof(RPC_REQUEST),
				LE32(Request->Ndr.DataLength)
		);

	if (LE32(Request->Ndr.DataSizeIs) != len - sizeof(RPC_REQUEST))
		logger("Warning: NDR32 data size field should be %u but is %u.\n",
				len - sizeof(RPC_REQUEST),
				LE32(Request->Ndr.DataSizeIs)
		);
}
开发者ID:jhbsz,项目名称:openwrt-packages-1,代码行数:35,代码来源:rpc.c


示例4: udi_cdc_comm_enable_common

static bool udi_cdc_comm_enable_common(uint8_t port)
{
	// Initialize control signal management
	udi_cdc_state[PORT] = CPU_TO_LE16(0);

	uid_cdc_state_msg[PORT].header.bmRequestType =
			USB_REQ_DIR_IN | USB_REQ_TYPE_CLASS |
			USB_REQ_RECIP_INTERFACE,
	uid_cdc_state_msg[PORT].header.bNotification = USB_REQ_CDC_NOTIFY_SERIAL_STATE,
	uid_cdc_state_msg[PORT].header.wValue = LE16(0),
	uid_cdc_state_msg[PORT].header.wIndex = LE16(UDI_CDC_COMM_IFACE_NUMBER),
	uid_cdc_state_msg[PORT].header.wLength = LE16(2),
	uid_cdc_state_msg[PORT].value = CPU_TO_LE16(0);

	udi_cdc_line_coding[PORT].dwDTERate = CPU_TO_LE32(UDI_CDC_DEFAULT_RATE);
	udi_cdc_line_coding[PORT].bCharFormat = UDI_CDC_DEFAULT_STOPBITS;
	udi_cdc_line_coding[PORT].bParityType = UDI_CDC_DEFAULT_PARITY;
	udi_cdc_line_coding[PORT].bDataBits = UDI_CDC_DEFAULT_DATABITS;
	// Call application callback
	// to initialize memories or indicate that interface is enabled
#if UDI_CDC_PORT_NB == 1
	UDI_CDC_SET_CODING_EXT((&udi_cdc_line_coding[0]));
	return UDI_CDC_ENABLE_EXT();
#else
	UDI_CDC_SET_CODING_EXT(port,(&udi_cdc_line_coding[port]));
	return UDI_CDC_ENABLE_EXT(port);
#endif
}
开发者ID:DJGCrusader,项目名称:TinyArmTroller,代码行数:28,代码来源:udi_cdc.c


示例5: RpcServer

void RpcServer(const SOCKET sock, const DWORD RpcAssocGroup)
{
	RPC_HEADER  _Header;

	RandomNumberInit();

	while (_recv(sock, &_Header, sizeof(_Header)))
	{
		unsigned int  _st, request_len, response_len, _a;
		BYTE  *_Request /* =  NULL */; //uncomment to avoid false warnings when compiling with -Og

		#if defined(_PEDANTIC) && !defined(NO_LOG)
		CheckRpcHeader(&_Header, _Header.PacketType, &logger);
		#endif // defined(_PEDANTIC) && !defined(NO_LOG)

		switch (_Header.PacketType)
		{
			case RPC_PT_BIND_REQ: _a = 0; break;
			case RPC_PT_REQUEST:  _a = 1; break;
			default: return;
		}

		if ( (_st = ( (signed)( request_len = LE16(_Header.FragLength) - sizeof(_Header) )) > 0
					&& (_Request = (BYTE*)malloc(request_len) )))
		{
			BYTE *_Response /* = NULL */; //uncomment to avoid warnings when compiling with -Og

			if ((_st = (_recv(sock, _Request, request_len))
						&& ( response_len = _Actions[_a].GetResponseSize(_Request, request_len) )
						&& (_Response = (BYTE*)malloc( response_len += sizeof(_Header) ))))
			{
				if ( (_st = _Actions[_a].GetResponse(_Request, _Response + sizeof(_Header), RpcAssocGroup, sock, request_len)) )
				{
					RPC_HEADER *rh = (RPC_HEADER *)_Response;

					if (_Actions[_a].ResponsePacketType == RPC_PT_RESPONSE)
						response_len = LE32(((RPC_RESPONSE*)(_Response + sizeof(_Header)))->AllocHint) + 24;

					/* *((WORD*)rh)           = *((WORD*)&_Header);
					rh->PacketFlags        = RPC_PF_FIRST | RPC_PF_LAST;
					rh->DataRepresentation = _Header.DataRepresentation;
					rh->AuthLength         = _Header.AuthLength;
					rh->CallId             = _Header.CallId;*/
					memcpy(rh, &_Header, sizeof(RPC_HEADER));
					rh->PacketType = _Actions[_a].ResponsePacketType;
					rh->FragLength = LE16(response_len);

					_st = _send(sock, _Response, response_len);

					if (DisconnectImmediately && rh->PacketType == RPC_PT_RESPONSE)
						shutdown(sock, VLMCSD_SHUT_RDWR);
				}
				free(_Response);
			}
			free(_Request);
		}
		if (!_st) return;
	}
}
开发者ID:jhbsz,项目名称:openwrt-packages-1,代码行数:59,代码来源:rpc.c


示例6: USBH_ParseHIDDesc

static void  USBH_ParseHIDDesc (USBH_HIDDesc_TypeDef *desc, uint8_t *buf)
{
	desc->bLength                  = *(uint8_t  *) (buf + 0);
	desc->bDescriptorType          = *(uint8_t  *) (buf + 1);
	desc->bcdHID                   =  LE16  (buf + 2);
	desc->bCountryCode             = *(uint8_t  *) (buf + 4);
	desc->bNumDescriptors          = *(uint8_t  *) (buf + 5);
	desc->bReportDescriptorType    = *(uint8_t  *) (buf + 6);
	desc->wItemLength              =  LE16  (buf + 7);
}
开发者ID:Poopi,项目名称:UsbXlater,代码行数:10,代码来源:usbh_dev_hid.c


示例7: RpcBind

static int RpcBind(const RPC_BIND_REQUEST *const Request, RPC_BIND_RESPONSE *const Response, const DWORD RpcAssocGroup, const SOCKET sock, const unsigned int len)
{
	unsigned int  i, _st = 0;

	for (i = 0; i < LE32(Request->NumCtxItems); i++)
	{
		if ( IsEqualGUID((GUID*)TransferSyntaxNDR32, &Request->CtxItems[i].TransferSyntax) )
		{
			Response->Results[i].SyntaxVersion = LE32(2);
			Response->Results[i].AckResult =
			Response->Results[i].AckReason = 0;
			memcpy(&Response->Results[i].TransferSyntax, TransferSyntaxNDR32, sizeof(GUID));
			_st = !0;
		}
		else
		{
			Response->Results[i].SyntaxVersion = 0;
			Response->Results[i].AckResult =
			Response->Results[i].AckReason = LE16(2); // Unsupported
			memset(&Response->Results[i].TransferSyntax, 0, sizeof(GUID));
		}
	}

	if ( _st )
	{
		Response->MaxXmitFrag = Request->MaxXmitFrag;
		Response->MaxRecvFrag = Request->MaxRecvFrag;
		Response->AssocGroup  = LE32(RpcAssocGroup);

		socklen_t len;
		struct sockaddr_storage addr;

		// M$ RPC does not do this. Excess bytes contain apparently random data
		memset(Response->SecondaryAddress, 0, sizeof(Response->SecondaryAddress));

		len = sizeof addr;

		if (getsockname(sock, (struct sockaddr*)&addr, &len) ||
				getnameinfo((struct sockaddr*)&addr, len, NULL, 0, (char*)Response->SecondaryAddress, sizeof(Response->SecondaryAddress), NI_NUMERICSERV))
		{
			// In case of failure (should never happen) use default port (doesn't seem to break activation)
			strcpy((char*)Response->SecondaryAddress, "1688");
		}

		uint_fast8_t temp = strlen((char*)Response->SecondaryAddress) + 1;
		////FIXME: Temporary workaround for TCP ports < 10. sizeof(Response->SecondaryAddress) must be padded to 2, 6, 10, ...
		if (temp < 3) temp = 3;

		Response->SecondaryAddressLength = LE16(temp);
		Response->NumResults = Request->NumCtxItems;
	}

	return _st;
}
开发者ID:jhbsz,项目名称:openwrt-packages-1,代码行数:54,代码来源:rpc.c


示例8: LE32

void Win32ResExtractor::fix_win32_image_section_header(Win32ImageSectionHeader *obj) {
	LE32(obj->misc.physical_address);
	LE32(obj->virtual_address);
	LE32(obj->size_of_raw_data);
	LE32(obj->pointer_to_raw_data);
	LE32(obj->pointer_to_relocations);
	LE32(obj->pointer_to_linenumbers);
	LE16(obj->number_of_relocations);
	LE16(obj->number_of_linenumbers);
	LE32(obj->characteristics);
}
开发者ID:Templier,项目名称:scummvm-test,代码行数:11,代码来源:resource_he.cpp


示例9: ext2_dir_lookup

/* read in the dir, look for the entry */
static int ext2_dir_lookup(ext2_t *ext2, struct ext2_inode *dir_inode, const char *name, inodenum_t *inum)
{
	uint file_blocknum;
	int err;
	uint8_t *buf;
	size_t namelen = strlen(name);
	
	if (!S_ISDIR(dir_inode->i_mode))
		return ERR_NOT_DIR;

	buf = malloc(EXT2_BLOCK_SIZE(ext2->sb));

	file_blocknum = 0;
	for (;;) {
		/* read in the offset */
		err = ext2_read_inode(ext2, dir_inode, buf, file_blocknum * EXT2_BLOCK_SIZE(ext2->sb), EXT2_BLOCK_SIZE(ext2->sb));
		if (err <= 0) {
			free(buf);
			return -1;
		}

		/* walk through the directory entries, looking for the one that matches */
		struct ext2_dir_entry_2 *ent;
		uint pos = 0;
		while (pos < EXT2_BLOCK_SIZE(ext2->sb)) {
			ent = (struct ext2_dir_entry_2 *)&buf[pos];

			LTRACEF("ent %d:%d: inode 0x%x, reclen %d, namelen %d\n",
					file_blocknum, pos, LE32(ent->inode), LE16(ent->rec_len), ent->name_len/* , ent->name*/);

			/* sanity check the record length */
			if (LE16(ent->rec_len) == 0)
				break;

			if (ent->name_len == namelen && memcmp(name, ent->name, ent->name_len) == 0) {
				// match
				*inum = LE32(ent->inode);
				LTRACEF("match: inode %d\n", *inum);
				free(buf);
				return 1;
			}

			pos += ROUNDUP(LE16(ent->rec_len), 4);
		}

		file_blocknum++;

		/* sanity check the directory. 4MB should be enough */
		if (file_blocknum > 1024) {
			free(buf);
			return -1;
		}
	}
}
开发者ID:LetsUnlockiPhone,项目名称:moboot,代码行数:55,代码来源:dir.c


示例10: udi_cdc_comm_enable

bool udi_cdc_comm_enable(void)
{
	uint8_t port;
	uint8_t iface_comm_num;

#if UDI_CDC_PORT_NB == 1 // To optimize code
	port = 0;
	udi_cdc_nb_comm_enabled = 0;
#else
	if (udi_cdc_nb_comm_enabled > UDI_CDC_PORT_NB) {
		udi_cdc_nb_comm_enabled = 0;
	}
	port = udi_cdc_nb_comm_enabled;
#endif

	// Initialize control signal management
	udi_cdc_state[port] = CPU_TO_LE16(0);

	uid_cdc_state_msg[port].header.bmRequestType =
			USB_REQ_DIR_IN | USB_REQ_TYPE_CLASS |
			USB_REQ_RECIP_INTERFACE;
	uid_cdc_state_msg[port].header.bNotification = USB_REQ_CDC_NOTIFY_SERIAL_STATE;
	uid_cdc_state_msg[port].header.wValue = LE16(0);

	switch (port) {
#define UDI_CDC_PORT_TO_IFACE_COMM(index, unused) \
	case index: \
		iface_comm_num = UDI_CDC_COMM_IFACE_NUMBER_##index; \
		break;
	MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_PORT_TO_IFACE_COMM, ~)
#undef UDI_CDC_PORT_TO_IFACE_COMM
	default:
		iface_comm_num = UDI_CDC_COMM_IFACE_NUMBER_0;
		break;
	}

	uid_cdc_state_msg[port].header.wIndex = LE16(iface_comm_num);
	uid_cdc_state_msg[port].header.wLength = LE16(2);
	uid_cdc_state_msg[port].value = CPU_TO_LE16(0);

	udi_cdc_line_coding[port].dwDTERate = CPU_TO_LE32(UDI_CDC_DEFAULT_RATE);
	udi_cdc_line_coding[port].bCharFormat = UDI_CDC_DEFAULT_STOPBITS;
	udi_cdc_line_coding[port].bParityType = UDI_CDC_DEFAULT_PARITY;
	udi_cdc_line_coding[port].bDataBits = UDI_CDC_DEFAULT_DATABITS;
	// Call application callback
	// to initialize memories or indicate that interface is enabled
	UDI_CDC_SET_CODING_EXT(port,(&udi_cdc_line_coding[port]));
	if (!UDI_CDC_ENABLE_EXT(port)) {
		return false;
	}
	udi_cdc_nb_comm_enabled++;
	return true;
}
开发者ID:AshitakaLax,项目名称:Ultimate_Developer_Keyboard,代码行数:53,代码来源:udi_cdc.c


示例11: copy_bb_qst_dat

static int copy_bb_qst_dat(const uint8_t *buf, uint8_t *rbuf, off_t sz,
                           uint32_t dsz) {
    const bb_quest_chunk_pkt *ck;
    uint32_t ptr = 176, optr = 0;
    char fn[32];
    char *cptr;
    uint32_t clen;

    while(ptr < sz) {
        ck = (const bb_quest_chunk_pkt *)(buf + ptr);

        /* Check the chunk for validity. */
        if(ck->hdr.pkt_type != LE16(QUEST_CHUNK_TYPE) ||
           ck->hdr.pkt_len != LE16(0x041C)) {
            debug(DBG_WARN, "Unknown or damaged quest chunk!\n");
            return -1;
        }

        /* Grab the vitals... */
        strncpy(fn, ck->filename, 16);
        fn[16] = 0;
        clen = LE32(ck->length);
        cptr = strrchr(fn, '.');

        /* Sanity check... */
        if(clen > 1024 || !cptr) {
            debug(DBG_WARN, "Damaged quest chunk!\n");
            return -1;
        }

        /* See if this is part of the .dat file */
        if(!strcmp(cptr, ".dat")) {
            if(optr + clen > dsz) {
                debug(DBG_WARN, "Quest file appears to be corrupted!\n");
                return -1;
            }

            memcpy(rbuf + optr, ck->data, clen);
            optr += clen;
        }

        ptr += 0x0420;
    }

    if(optr != dsz) {
        debug(DBG_WARN, "Quest file appears to be corrupted!\n");
        return -1;
    }

    return 0;
}
开发者ID:seichejs,项目名称:sylverant,代码行数:51,代码来源:quests.c


示例12: tc_irq

__interrupt
#endif
static void tc_irq(void)
{
    // Increment the ms seconds counter
    tc_tick++;

    // Clear the interrupt flag. This is a side effect of reading the TC SR.
    tc_read_sr(EXAMPLE_TC, EXAMPLE_TC_CHANNEL);

    // specify that an interrupt has been raised
    //update_timer = true;

    /*
    if ( tc_tick % 1000 == 0 ) {
    	printf( "Rawr %d\r\n", sysclk_get_pba_hz() );
    	tc_tick = 0;
    }
    */

    if ( tc_tick == IN_FORMAT_LSBYTE_SAMPLE_FREQ ) {
        //printf( "weee %u %u\r\n", tc_tick, udi_audio_is_active() );
        tc_tick = 0;
    }

    if ( udi_audio_is_active() ) {
        int16_t a = tc_tick; //ADC_ReadSampleAndSetNextAddr( 4 );

        /*
        samples[sampleIndex] = LE16( ADC_ReadSampleAndSetNextAddr( 2 ) );
        sampleIndex++;
        */

        for ( int j = 0; j < IN_FORMAT_NB_CHANNELS; j++ ) {
            //samples[sampleIndex] = LE16( ADC_ReadSampleAndSetNextAddr( (j+1) % IN_FORMAT_NB_CHANNELS ) );
            if ( latestSelector[j] ) {
                samples[sampleIndex] = LE16( latestSamples2[j] );
            } else {
                samples[sampleIndex] = LE16( latestSamples1[j] );
            }
            //samples[sampleIndex] = LE16( latestSamples[j] );
            sampleIndex++;

            if ( sampleIndex >= SAMPLES_PER_PACKET ) {
                udi_audio_send_samples( samples, (SAMPLE_SIZE * SAMPLES_PER_PACKET) );
                sampleIndex = 0;
            }
        }
    }
}
开发者ID:theojulienne,项目名称:BowerBird-AVR32,代码行数:50,代码来源:sampler.c


示例13: uuid2StringLE

void uuid2StringLE(const GUID *const guid, char *const string)
{
	sprintf(string,
#		ifdef _WIN32
		"%08x-%04x-%04x-%04x-%012I64x",
#		else
		"%08x-%04x-%04x-%04x-%012llx",
#		endif
		(unsigned int)LE32(guid->Data1),
		(unsigned int)LE16(guid->Data2),
		(unsigned int)LE16(guid->Data3),
		(unsigned int)BE16(*(uint16_t*)guid->Data4),
		(unsigned long long)BE64(*(uint64_t*)(guid->Data4)) & 0xffffffffffffLL
	);
}
开发者ID:galaxysd,项目名称:GalaxyCodeBases,代码行数:15,代码来源:output.c


示例14: logRequestVerbose

void logRequestVerbose(const REQUEST *const Request, const PRINTFUNC p)
{
	char guidBuffer[GUID_STRING_LENGTH + 1];
	char WorkstationBuffer[3 * WORKSTATION_NAME_BUFFER];
	const char *productName;
	ProdListIndex_t index;

	p("Protocol version                : %u.%u\n", LE16(Request->MajorVer), LE16(Request->MinorVer));
	p("Client is a virtual machine     : %s\n", LE32(Request->VMInfo) ? "Yes" : "No");
	p("Licensing status                : %u (%s)\n", (uint32_t)LE32(Request->LicenseStatus), LE32(Request->LicenseStatus) < _countof(LicenseStatusText) ? LicenseStatusText[LE32(Request->LicenseStatus)] : "Unknown");
	p("Remaining time (0 = forever)    : %i minutes\n", (uint32_t)LE32(Request->BindingExpiration));

	uuid2StringLE(&Request->AppID, guidBuffer);
	productName = getProductNameLE(&Request->AppID, AppList, getAppListSize(), &index);
	p("Application ID                  : %s (%s)\n", guidBuffer, productName);

	uuid2StringLE(&Request->ActID, guidBuffer);

#	ifndef NO_EXTENDED_PRODUCT_LIST
	productName = getProductNameLE(&Request->ActID, ExtendedProductList, getExtendedProductListSize(), &index);
#	else
	productName = "Unknown";
#	endif

	p("SKU ID (aka Activation ID)      : %s (%s)\n", guidBuffer, productName);

	uuid2StringLE(&Request->KMSID, guidBuffer);
	productName = getProductNameLE(&Request->KMSID, ProductList, getProductListSize(), &index);
	p("KMS ID (aka KMS counted ID)     : %s (%s)\n", guidBuffer, productName);

	uuid2StringLE(&Request->CMID, guidBuffer);
	p("Client machine ID               : %s\n", guidBuffer);

	uuid2StringLE(&Request->CMID_prev, guidBuffer);
	p("Previous client machine ID      : %s\n", guidBuffer);


	char mbstr[64];
	time_t st;
	st = fileTimeToUnixTime(&Request->ClientTime);
	strftime(mbstr, sizeof(mbstr), "%Y-%m-%d %X", gmtime(&st));
	p("Client request timestamp (UTC)  : %s\n", mbstr);

	ucs2_to_utf8(Request->WorkstationName, WorkstationBuffer, WORKSTATION_NAME_BUFFER, sizeof(WorkstationBuffer));

	p("Workstation name                : %s\n", WorkstationBuffer);
	p("N count policy (minimum clients): %u\n", (uint32_t)LE32(Request->N_Policy));
}
开发者ID:galaxysd,项目名称:GalaxyCodeBases,代码行数:48,代码来源:output.c


示例15: RpcRequest

static int RpcRequest(const RPC_REQUEST *const Request, RPC_RESPONSE *const Response, const DWORD RpcAssocGroup, const SOCKET sock, const unsigned int len)
{
	uint_fast16_t  _v;
	_v = LE16(((WORD*)Request->Data)[1]) - 4;

	int ResponseSize = _Versions[_v].CreateResponse(Request->Data, Response->Data);

	if ( ResponseSize )
	{
		Response->Ndr.DataSizeIs1 = LE32(0x00020000);
		Response->Ndr.DataLength  =
		Response->Ndr.DataSizeIs2 = LE32(ResponseSize);

		int len = ResponseSize + sizeof(Response->Ndr);

		BYTE* pRpcReturnCode = ((BYTE*)&Response->Ndr) + len;
		UA32(pRpcReturnCode) = 0; //LE16 not needed for 0
		len += sizeof(DWORD);

		// Pad zeros to 32-bit align (seems not neccassary but Windows RPC does it this way)
		int pad = ((~len & 3) + 1) & 3;
		memset(pRpcReturnCode + sizeof(DWORD), 0, pad);
		len += pad;

		Response->AllocHint = LE32(len);

		Response->AllocHint +=
				Response->ContextId = Request->ContextId;

		*((WORD*)&Response->CancelCount) = 0; // CancelCount + Pad1
	}

	return ResponseSize;
}
开发者ID:jhbsz,项目名称:openwrt-packages-1,代码行数:34,代码来源:rpc.c


示例16: uhc_enumeration_step15

/**
 * \brief Device enumeration step 15
 * Enables UHI interfaces
 *
 * \param add           USB address of the setup request
 * \param status        Transfer status
 * \param payload_trans Number of data transfered during DATA phase
 */
static void uhc_enumeration_step15(
		usb_add_t add,
		uhd_trans_status_t status,
		uint16_t payload_trans)
{
	UNUSED(add);
	if ((status!=UHD_TRANS_NOERROR) || (payload_trans!=0)) {
		for(uint8_t i = 0; i < UHC_NB_UHI; i++) {
			uhc_uhis[i].uninstall(uhc_dev_enum);
		}
		uhc_enumeration_error((status == UHD_TRANS_DISCONNECT)?
				UHC_ENUM_DISCONNECT : UHC_ENUM_FAIL);
		return;
	}

	// Enable all UHIs supported
	for (uint8_t i = 0; i < UHC_NB_UHI; i++) {
		uhc_uhis[i].enable(uhc_dev_enum);
	}

#ifdef USB_HOST_LPM_SUPPORT
	// Check LPM support
	if (g_uhc_device_root.dev_desc.bcdUSB >= LE16(USB_V2_1)) {
		// Device can support LPM
		// Start LPM support check
		uhc_enumeration_step16_lpm();
		return;
	}
	uhc_dev_enum->lpm_desc = NULL;
#endif

	uhc_enum_try = 0;

	UHC_ENUM_EVENT(uhc_dev_enum, UHC_ENUM_SUCCESS);
}
开发者ID:InSoonPark,项目名称:asf,代码行数:43,代码来源:uhc.c


示例17: CheckRpcBindRequest

static void CheckRpcBindRequest(const RPC_BIND_REQUEST *const Request, const unsigned int len)
{
	uint_fast8_t i, HasTransferSyntaxNDR32 = FALSE;
	char guidBuffer1[GUID_STRING_LENGTH + 1], guidBuffer2[GUID_STRING_LENGTH + 1];

	uint32_t CapCtxItems =	(len - sizeof(*Request) + sizeof(Request->CtxItems)) / sizeof(Request->CtxItems);
	DWORD NumCtxItems = LE32(Request->NumCtxItems);

	if (NumCtxItems > CapCtxItems) // Can't be too small because already handled by RpcBindSize
		logger("Warning: Excess bytes in RPC bind request.\n");

	for (i = 0; i < NumCtxItems; i++)
	{
		if ( IsEqualGUID((GUID*)TransferSyntaxNDR32, &Request->CtxItems[i].TransferSyntax) )
		{
			HasTransferSyntaxNDR32 = TRUE;

			if (Request->CtxItems[i].ContextId != 0)
				logger("Warning: NDR32 context id is not 0.\n");

			if (Request->CtxItems[i].NumTransItems != LE16(1))
				logger("Fatal: %u NDR32 transfer items detected, but only one is supported.\n",
						(unsigned int)LE16(Request->CtxItems[i].NumTransItems)
				);

			if (!IsEqualGUID(&Request->CtxItems[i].InterfaceUUID, InterfaceUuid))
			{
				Uuid2StringLE((GUID*)&Request->CtxItems[i].InterfaceUUID, guidBuffer1);
				Uuid2StringLE((GUID*)InterfaceUuid, guidBuffer2);
				logger("Warning: NDR32 Interface UUID is %s but should be %s.\n", guidBuffer1, guidBuffer2);
			}

			if (Request->CtxItems[i].InterfaceVerMajor != LE16(1) || Request->CtxItems[i].InterfaceVerMinor != 0)
				logger("Warning: NDR32 Interface version is %u.%u but should be 1.0.\n",
						(unsigned int)LE16(Request->CtxItems[i].InterfaceVerMajor),
						(unsigned int)LE16(Request->CtxItems[i].InterfaceVerMinor)
				);

			if (Request->CtxItems[0].SyntaxVersion != LE32(2))
				logger("NDR32 transfer syntax version is %u but should be 2.\n", LE32(Request->CtxItems[0].SyntaxVersion));
		}
	}

	if (!HasTransferSyntaxNDR32)
		logger("Warning: RPC bind request has no NDR32 CtxItem.\n");
}
开发者ID:jhbsz,项目名称:openwrt-packages-1,代码行数:46,代码来源:rpc.c


示例18: ImgLoadGd

gdImagePtr ImgLoadGd(const char *filename, unsigned int *filesize) {
	FILE *file;
	gdImagePtr img;
	char blah[4], *tmp;
	uint16_t sig16;
	uint32_t sig32;
	long filelen;

	if (!filename)
		return NULL;

	file = NULL;
	tmp  = NULL;
	img  = NULL;

	file = fopen(filename, "rb");
	if (!file)
		return NULL;

	if (!fread(blah, 4, 1, file))
		goto done;

	fseek(file, 0, SEEK_END);
	filelen = ftell(file);
	rewind(file);

	if (filesize)
		*filesize = filelen;

	tmp = malloc(filelen);
	if (!fread(tmp, filelen, 1, file))
		goto done;

	sig16 = LE16(*(uint16_t *)blah);
	sig32 = LE32(*(uint32_t *)blah);

	if (sig16 == 0xD8FF) {
		img = gdImageCreateFromJpegPtr(filelen, tmp);
	} else if (sig32 == 'GNP\x89') {
		img = gdImageCreateFromPngPtr(filelen, tmp);
	} else if (sig32 == '8FIG') {
		img = gdImageCreateFromGifPtr(filelen, tmp);
	} else if (sig16 == 'MB') {
		img = gdImageCreateFromWBMPPtr(filelen, tmp);
	} else {
		fprintf(stderr, "WARNING: %s is an unsupported image format\n", filename);
	}

done:
	if (file)
		fclose(file);
	if (tmp)
		free(tmp);
	return img;
}
开发者ID:kwolekr,项目名称:imgcmp,代码行数:55,代码来源:img.c


示例19: USBH_ParseCfgDesc

/**
  * @brief  USBH_ParseCfgDesc 
  *         This function Parses the configuration descriptor
  * @param  cfg_desc: Configuration Descriptor address
  * @param  buf: Buffer where the source descriptor is available
  * @param  length: Length of the descriptor
  * @retval None
  */
static void USBH_ParseCfgDesc (USBH_CfgDescTypeDef* cfg_desc,
                               uint8_t *buf, 
                               uint16_t length)
{  
  USBH_InterfaceDescTypeDef    *pif ;
  USBH_EpDescTypeDef           *pep;  
  USBH_DescHeader_t             *pdesc = (USBH_DescHeader_t *)buf;
  uint16_t                      ptr;
  int8_t                        if_ix = 0;
  int8_t                        ep_ix = 0;  
  
  pdesc   = (USBH_DescHeader_t *)buf;
  
  /* Parse configuration descriptor */
  cfg_desc->bLength             = *(uint8_t  *) (buf + 0);
  cfg_desc->bDescriptorType     = *(uint8_t  *) (buf + 1);
  cfg_desc->wTotalLength        = LE16 (buf + 2);
  cfg_desc->bNumInterfaces      = *(uint8_t  *) (buf + 4);
  cfg_desc->bConfigurationValue = *(uint8_t  *) (buf + 5);
  cfg_desc->iConfiguration      = *(uint8_t  *) (buf + 6);
  cfg_desc->bmAttributes        = *(uint8_t  *) (buf + 7);
  cfg_desc->bMaxPower           = *(uint8_t  *) (buf + 8);    
  
  
  if (length > USB_CONFIGURATION_DESC_SIZE)
  {
    ptr = USB_LEN_CFG_DESC;
    pif = (USBH_InterfaceDescTypeDef *)0;
    
    
    while ((if_ix < USBH_MAX_NUM_INTERFACES ) && (ptr < cfg_desc->wTotalLength))
    {
      pdesc = USBH_GetNextDesc((uint8_t *)pdesc, &ptr);
      if (pdesc->bDescriptorType   == USB_DESC_TYPE_INTERFACE) 
      {
        pif = &cfg_desc->Itf_Desc[if_ix];
        USBH_ParseInterfaceDesc (pif, (uint8_t *)pdesc);            
        
        ep_ix = 0;
        pep = (USBH_EpDescTypeDef *)0;        
        while ((ep_ix < pif->bNumEndpoints) && (ptr < cfg_desc->wTotalLength))
        {
          pdesc = USBH_GetNextDesc((void* )pdesc, &ptr);
          if (pdesc->bDescriptorType   == USB_DESC_TYPE_ENDPOINT) 
          {  
            pep = &cfg_desc->Itf_Desc[if_ix].Ep_Desc[ep_ix];
            USBH_ParseEPDesc (pep, (uint8_t *)pdesc);
            ep_ix++;
          }
        }
        if_ix++;
      }
    }
  }  
}
开发者ID:ChicoState,项目名称:eggbeater,代码行数:63,代码来源:usbh_ctlreq.c


示例20: USBH_ParseEPDesc

//--------------------------------------------------------------
static void  USBH_ParseEPDesc (USBH_EpDesc_TypeDef  *ep_descriptor, 
                               uint8_t *buf)
{
  
  ep_descriptor->bLength          = *(uint8_t  *) (buf + 0);
  ep_descriptor->bDescriptorType  = *(uint8_t  *) (buf + 1);
  ep_descriptor->bEndpointAddress = *(uint8_t  *) (buf + 2);
  ep_descriptor->bmAttributes     = *(uint8_t  *) (buf + 3);
  ep_descriptor->wMaxPacketSize   = LE16 (buf + 4);
  ep_descriptor->bInterval        = *(uint8_t  *) (buf + 6);
}
开发者ID:m4th3u5,项目名称:USB-HID--host-keyboard-anbt2-final-com-acento--repete--limites---menu-e-correcoes,代码行数:12,代码来源:usbh_stdreq.c



注:本文中的LE16函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ LE32函数代码示例发布时间:2022-05-30
下一篇:
C++ LE函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap