本文整理汇总了C++中LO函数的典型用法代码示例。如果您正苦于以下问题：C++ LO函数的具体用法？C++ LO怎么用？C++ LO使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了LO函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: make_condition_modifier
static int make_condition_modifier(struct iforce* iforce,
struct resource* mod_chunk, int no_alloc,
__u16 rsat, __u16 lsat, __s16 rk, __s16 lk, u16 db, __s16 center)
{
unsigned char data[10];
if (!no_alloc) {
mutex_lock(&iforce->mem_mutex);
if (allocate_resource(&(iforce->device_memory), mod_chunk, 8,
iforce->device_memory.start, iforce->device_memory.end, 2L,
NULL, NULL)) {
mutex_unlock(&iforce->mem_mutex);
return -ENOSPC;
}
mutex_unlock(&iforce->mem_mutex);
}
data[0] = LO(mod_chunk->start);
data[1] = HI(mod_chunk->start);
data[2] = (100 * rk) >> 15;
data[3] = (100 * lk) >> 15;
center = (500 * center) >> 15;
data[4] = LO(center);
data[5] = HI(center);
db = (1000 * db) >> 16;
data[6] = LO(db);
data[7] = HI(db);
data[8] = (100 * rsat) >> 16;
data[9] = (100 * lsat) >> 16;
iforce_send_packet(iforce, FF_CMD_CONDITION, data);
iforce_dump_packet("condition", FF_CMD_CONDITION, data);
return 0;
}
开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:39，代码来源:iforce-ff.c
示例2: make_condition_modifier
static int make_condition_modifier(struct iforce* iforce,
struct resource* mod_chunk, int no_alloc,
__u16 rsat, __u16 lsat, __s16 rk, __s16 lk, u16 db, __s16 center)
{
unsigned char data[10];
if (!no_alloc) {
mutex_lock(&iforce->mem_mutex);
if (allocate_resource(&(iforce->device_memory), mod_chunk, 8,
iforce->device_memory.start, iforce->device_memory.end, 2L,
NULL, NULL)) {
mutex_unlock(&iforce->mem_mutex);
return -ENOSPC;
}
mutex_unlock(&iforce->mem_mutex);
}
data[0] = LO(mod_chunk->start);
data[1] = HI(mod_chunk->start);
data[2] = (100 * rk) >> 15; /* Dangerous: the sign is extended by gcc on plateforms providing an arith shift */
data[3] = (100 * lk) >> 15; /* This code is incorrect on cpus lacking arith shift */
center = (500 * center) >> 15;
data[4] = LO(center);
data[5] = HI(center);
db = (1000 * db) >> 16;
data[6] = LO(db);
data[7] = HI(db);
data[8] = (100 * rsat) >> 16;
data[9] = (100 * lsat) >> 16;
iforce_send_packet(iforce, FF_CMD_CONDITION, data);
iforce_dump_packet("condition", FF_CMD_CONDITION, data);
return 0;
}
开发者ID:LouZiffer，项目名称:m900_kernel_cupcake-SDX，代码行数:39，代码来源:iforce-ff.c
示例3: usart_init
void usart_init(void)
{
UBRR0L = LO(BAUDDIVIDER);
UBRR0H = HI(BAUDDIVIDER);
UCSR0B = 1<<RXEN0|1<<TXEN0|1<<RXCIE0|1<<TXCIE0;
UCSR0C = 1<<UCSZ00|1<<UCSZ01;
usart_rx_wp = 0;
usart_rx_rp = 0;
usart_tx_wp = 0;
usart_tx_rp = 0;
}
开发者ID:cluePrints，项目名称:avr-eclipse-workspace，代码行数:13，代码来源:usart.c
示例4: ads_read
void ads_read(uint8_t chip, sample_data* sample){
ads_select(chip);
uint8_t* buf=(uint8_t*)sample;
uint8_t* end=(uint8_t*)(sample+(sizeof(sample_data)));
while(buf != end){
*(buf++)=spi_send(0x00);
}
for(uint8_t i=0; i<4; i++){
uint16_t tmp = ((LO(sample->ch[i])<<8) | (HI(sample->ch[i])));
sample->ch[i] = tmp;
}
ads_deselect();
}
开发者ID:jaseg，项目名称:openmind-firmware，代码行数:13，代码来源:ads1x9x.c
示例5: stlink2_write_and_read_byte
int stlink2_write_and_read_byte(programmer_t *pgm, unsigned char byte, unsigned int start) {
unsigned char buf[4], start2[2];
pack_int16(start, start2);
stlink2_cmd(pgm, 0xf40b, 7,
0x00, 0x01,
0x00, 0x00,
HI(start), LO(start),
byte);
usleep(2000);
stlink2_get_status(pgm);
stlink2_cmd(pgm, 0xf40c, 0);
return(msg_recv_int8(pgm));
}
开发者ID:njzhangyifei，项目名称:stm8flash，代码行数:14，代码来源:stlinkv2.c
示例6: make_envelope_modifier
static int make_envelope_modifier(struct iforce* iforce,
struct resource* mod_chunk, int no_alloc,
u16 attack_duration, __s16 initial_level,
u16 fade_duration, __s16 final_level)
{
unsigned char data[8];
attack_duration = TIME_SCALE(attack_duration);
fade_duration = TIME_SCALE(fade_duration);
if (!no_alloc) {
mutex_lock(&iforce->mem_mutex);
if (allocate_resource(&(iforce->device_memory), mod_chunk, 0x0e,
iforce->device_memory.start, iforce->device_memory.end, 2L,
NULL, NULL)) {
mutex_unlock(&iforce->mem_mutex);
return -ENOSPC;
}
mutex_unlock(&iforce->mem_mutex);
}
data[0] = LO(mod_chunk->start);
data[1] = HI(mod_chunk->start);
data[2] = LO(attack_duration);
data[3] = HI(attack_duration);
data[4] = HI(initial_level);
data[5] = LO(fade_duration);
data[6] = HI(fade_duration);
data[7] = HI(final_level);
iforce_send_packet(iforce, FF_CMD_ENVELOPE, data);
return 0;
}
开发者ID:LouZiffer，项目名称:m900_kernel_cupcake-SDX，代码行数:36，代码来源:iforce-ff.c
示例7: RunRTOS
//RTOS Запуск системного таймера
inline void RunRTOS (void)
{
// TCCR2A = 1 << WGM21 | 4 << CS20; // Freq = CK/64 - Установить режим и предделитель
// Автосброс после достижения регистра сравнения
TCCR2B |= (1<<CS22);
TCCR2B &= ~((1<<CS21) | (1<<CS20));
TCCR2B |= (1<<WGM22);
TCNT2 = 0; // Установить начальное значение счётчиков
OCR2B = LO(TimerDivider); // Установить значение в регистр сравнения
//TIMSK2 = 0 << TOIE0 | 1<<OCF2A | 0<<TOIE0; // Разрешаем прерывание RTOS - запуск ОС
TIMSK2 = 1 << TOIE2;
sei();
}
开发者ID:ZhukovAN，项目名称:Net173.ATmega328P，代码行数:16，代码来源:EERTOSHAL.c
示例8: InitAll
inline void InitAll(void)
{
//InitUSART
UBRRL = LO(bauddivider);
UBRRH = HI(bauddivider);
UCSRA = 0;
UCSRB = 1<<RXEN|1<<TXEN|0<<RXCIE|0<<TXCIE;
UCSRC = 1<<URSEL|1<<UCSZ0|1<<UCSZ1;
//InitPort
LED_DDR |= 1<<LED1|1<<LED2|1<<LED3|1<<I_L|1<<I_C;
}
开发者ID:dek-an，项目名称:Micro，代码行数:15，代码来源:HAL.c
示例9: SpiSetUp
long SpiSetUp(unsigned char *pUserBuffer, unsigned short usLength)
{
size_t tx_len = (usLength & 1) ? usLength : usLength +1;
pUserBuffer[0] = WRITE;
pUserBuffer[1] = HI(tx_len);
pUserBuffer[2] = LO(tx_len);
pUserBuffer[3] = 0;
pUserBuffer[4] = 0;
tSLInformation.solicitedResponse = 1; // We are doing a write
sSpiInformation.pTxPacket = pUserBuffer;
sSpiInformation.usTxPacketLength = usLength;
tx_len += SPI_HEADER_SIZE;
return tx_len;
}
开发者ID:NicholasJohnson9149，项目名称:core-common-lib，代码行数:16，代码来源:cc3000_spi.c
示例10: stub
//---------------------------------------------------------------------------------------------
void stub(void)//заглушка для проверки
{
unsigned int CRC=0;
TransferBuf[0]=ADRESS_DEV;
TransferBuf[1]=0x3;//read reg
TransferBuf[2]=0x2;
TransferBuf[3]=0x1;
TransferBuf[4]=0x1;
//TransferBuf[5]=0x1;
CRC=CRC16(&TransferBuf,5);
TransferBuf[5]=HI(CRC);
TransferBuf[6]=LO(CRC);
buf_len=0x7;
}
开发者ID:nowhard，项目名称:IRDA，代码行数:18，代码来源:proto.c
示例11: HI
/**
Инициализировать UART
*/
void UART::init(void) {
// задаем скорость UART
UBRRH = HI(BAUDRATE_DIVIDER);
UBRRL = LO(BAUDRATE_DIVIDER);
UCSRA = 0;
// включаем трансмиттер и ресивер
UCSRB = 1 << TXEN | 1 << RXEN | 1 << RXCIE;
// контроль четности: нет
// стоп бит: 1
// размер кадра 8 бит
UCSRC = (1 << URSEL) | (1 << UCSZ0) | (1 << UCSZ1);
receiver.init();
}
开发者ID:adyach，项目名称:little-helper，代码行数:20，代码来源:UART.cpp
示例12: remote_ahci_get_num_blocks
static void remote_ahci_get_num_blocks(ddf_fun_t *fun, void *iface,
ipc_callid_t callid, ipc_call_t *call)
{
const ahci_iface_t *ahci_iface = (ahci_iface_t *) iface;
if (ahci_iface->get_num_blocks == NULL) {
async_answer_0(callid, ENOTSUP);
return;
}
uint64_t blocks;
const int ret = ahci_iface->get_num_blocks(fun, &blocks);
if (ret != EOK)
async_answer_0(callid, ret);
else
async_answer_2(callid, EOK, HI(blocks), LO(blocks));
}
开发者ID:jvesely，项目名称:helenos，代码行数:18，代码来源:remote_ahci.c
示例13: ahci_write_blocks
int ahci_write_blocks(async_sess_t *sess, uint64_t blocknum, size_t count,
void* buf)
{
async_exch_t *exch = async_exchange_begin(sess);
if (!exch)
return EINVAL;
aid_t req = async_send_4(exch, DEV_IFACE_ID(AHCI_DEV_IFACE),
IPC_M_AHCI_WRITE_BLOCKS, HI(blocknum), LO(blocknum), count, NULL);
async_share_out_start(exch, buf, AS_AREA_READ | AS_AREA_WRITE);
async_exchange_end(exch);
sysarg_t rc;
async_wait_for(req, &rc);
return rc;
}
开发者ID:jvesely，项目名称:helenos，代码行数:19，代码来源:remote_ahci.c
示例14: ToString
inline std::string ToString(const Direction& d) {
std::stringstream sst;
std::stringstream sst2;
unsigned short hi = HI(d);
unsigned short lo = LO(d);
if ((hi & 1) == 1) {
sst << "X";
sst2 << (((lo & 1) == 1) ? "P" : "M");
}
if ((hi & 2) == 2) {
sst << "Y";
sst2 << (((lo & 2) == 2) ? "P" : "M");
}
if ((hi & 4) == 4) {
sst << "Z";
sst2 << (((lo & 4) == 4) ? "P" : "M");
}
sst << "_" << sst2.str();
return sst.str();
}
开发者ID:hyperpower，项目名称:carpio，代码行数:20，代码来源:domain_define.hpp
示例15: cdrom_helper
void cdrom_helper(unsigned char *req_buf, unsigned char *transfer_buf,
unsigned int dos_transfer_buf)
{
unsigned int Sector_plus_150,Sector;
struct cdrom_msf cdrom_msf;
struct cdrom_subchnl cdrom_subchnl;
struct cdrom_tochdr cdrom_tochdr;
struct cdrom_tocentry cdrom_tocentry;
struct cdrom_volctrl cdrom_volctrl;
int n, err;
cdrom_subchnl.cdsc_format = CDROM_MSF;
IndexCd=(int)((HI(ax) & 0xC0)>>6);
HI(ax) = HI(ax) & 0x3F;
if ((cdu33a) && (cdrom_fd < 0)) {
cdrom_fd = open (path_cdrom, O_RDONLY | O_NONBLOCK);
if (cdrom_fd < 0) {
switch (HI(ax)) {
case 0x09: /* media changed request */
LO(bx) = 1; /* media changed */
LO(ax) = 0;
return;
case 0x0A: /* device status request */
LWORD(ebx) = audio_status.status | 0x800; /* no disc */
LO(ax) = 0;
return;
}
LO(ax) = 1; /* for other requests return with error */
return ;
}
}
switch (HI(ax)) {
case 0x01: /* NOTE: you can't see XA data disks if bit 10 of status
* is cleared, MSCDEX will test it and skip XA entries!
* Actually the entries skipped must have this pattern:
* xxxx1xxx xxxxxxxx 0x58 0x41
* and the mscdex 2.25 code is:
* test word ptr [bx+1Eh],400h
* jz [check for XA]
* [return 0 = valid entry]
* [check for XA]
* ...
* cmp word ptr es:[bx+6],4158h 'XA'
* jne [return 0]
* mov ax,es:[bx+4]
* and ax,8
* [return ax]
*/
audio_status.status = 0x00000710; /* see function 0x0A below */
audio_status.paused_bit = 0;
audio_status.media_changed = 0;
audio_status.volume0 = 0xFF;
audio_status.volume1 = 0xFF;
audio_status.volume2 = 0;
audio_status.volume3 = 0;
audio_status.outchan0 = 0;
audio_status.outchan1 = 1;
audio_status.outchan2 = 2;
audio_status.outchan3 = 3;
cdrom_fd = open (path_cdrom, O_RDONLY | O_NONBLOCK);
err = errno;
if (cdrom_fd < 0) {
C_printf("CDROM: cdrom open (%s) failed: %s\n",
path_cdrom, strerror(err));
LO(ax) = 0;
if ((err == EIO) || (err==ENOMEDIUM)) {
/* drive which cannot be opened if no
disc is inserted! */
cdu33a = 1;
if (! eject_allowed)
LO(ax) = 1; /* no disk in drive */
}
else LO(ax) = 1; /* no cdrom drive installed */
if (! eject_allowed)
LO(ax) = 1; /* no disk in drive */
}
else {
LO(ax) = 0;
if (! eject_allowed) {
if (ioctl (cdrom_fd, CDROMREADTOCHDR, &cdrom_tochdr))
if (ioctl (cdrom_fd, CDROMREADTOCHDR, &cdrom_tochdr))
LO(ax) = 1;
}
}
break;
case 0x02: /* read long */
if (eject_allowed && ioctl (cdrom_fd, CDROMSUBCHNL, &cdrom_subchnl) && errno != ENOTTY) {
audio_status.media_changed = 1;
if (ioctl (cdrom_fd, CDROMSUBCHNL, &cdrom_subchnl)) {
/* no disc in drive */
LO(ax) = 1;
break;
}
//.........这里部分代码省略.........
开发者ID:ccarcel，项目名称:dosemu2，代码行数:101，代码来源:cdrom.c
示例16: SpiWrite
//*****************************************************************************
//
//! SpiWrite
//!
//! @param pUserBuffer buffer to write
//! @param usLength buffer's length
//!
//! @return none
//!
//! @brief Spi write operation
//
//*****************************************************************************
long
SpiWrite(unsigned char *pUserBuffer, unsigned short usLength)
{
unsigned char ucPad = 0;
// Figure out the total length of the packet in order to figure out if there
// is padding or not
if(!(usLength & 0x0001))
{
ucPad++;
}
pUserBuffer[0] = WRITE;
pUserBuffer[1] = HI(usLength + ucPad);
pUserBuffer[2] = LO(usLength + ucPad);
pUserBuffer[3] = 0;
pUserBuffer[4] = 0;
usLength += (SPI_HEADER_SIZE + ucPad);
// The magic number that resides at the end of the TX/RX buffer (1 byte after
// the allocated size) for the purpose of detection of the overrun. If the
// magic number is overwritten - buffer overrun occurred - and we will stuck
// here forever!
if (wlan_tx_buffer[CC3000_TX_BUFFER_SIZE - 1] != CC3000_BUFFER_MAGIC_NUMBER)
{
while (1)
;
}
if (sSpiInformation.ulSpiState == eSPI_STATE_POWERUP)
{
while (sSpiInformation.ulSpiState != eSPI_STATE_INITIALIZED)
;
}
if (sSpiInformation.ulSpiState == eSPI_STATE_INITIALIZED)
{
// This is time for first TX/RX transactions over SPI: the IRQ is down -
// so need to send read buffer size command
SpiFirstWrite(pUserBuffer, usLength);
}
else
{
// We need to prevent here race that can occur in case 2 back to back
// packets are sent to the device, so the state will move to IDLE and once
//again to not IDLE due to IRQ
tSLInformation.WlanInterruptDisable();
while (sSpiInformation.ulSpiState != eSPI_STATE_IDLE)
{
;
}
sSpiInformation.ulSpiState = eSPI_STATE_WRITE_IRQ;
sSpiInformation.pTxPacket = pUserBuffer;
sSpiInformation.usTxPacketLength = usLength;
// Assert the CS line and wait till SSI IRQ line is active and then
// initialize write operation
ASSERT_CS();
// Re-enable IRQ - if it was not disabled - this is not a problem...
tSLInformation.WlanInterruptEnable();
// check for a missing interrupt between the CS assertion and enabling back the interrupts
if (tSLInformation.ReadWlanInterruptPin() == 0)
{
SpiWriteDataSynchronous(sSpiInformation.pTxPacket, sSpiInformation.usTxPacketLength);
sSpiInformation.ulSpiState = eSPI_STATE_IDLE;
DEASSERT_CS();
}
}
// Due to the fact that we are currently implementing a blocking situation
// here we will wait till end of transaction
while (eSPI_STATE_IDLE != sSpiInformation.ulSpiState)
;
return(0);
}
开发者ID:CurubaProject，项目名称:CurubaDevice，代码行数:95，代码来源:spi.c
示例17: led_g_off
void led_g_off() { LO(LEDG_PORT,LEDG); }
开发者ID:prcek，项目名称:RFPad，代码行数:1，代码来源:pad.c
示例18: i2c_sclLo
void i2c_sclLo() {
i2c_hold();
led_y_off();
LO(SCL_PORT,SCL);
}
开发者ID:prcek，项目名称:RFPad，代码行数:5，代码来源:pad.c
示例19: iforce_send_packet
/*
* Send a packet of bytes to the device
*/
int iforce_send_packet(struct iforce *iforce, u16 cmd, unsigned char* data)
{
/* Copy data to buffer */
int n = LO(cmd);
int c;
int empty;
int head, tail;
unsigned long flags;
/*
* Update head and tail of xmit buffer
*/
spin_lock_irqsave(&iforce->xmit_lock, flags);
head = iforce->xmit.head;
tail = iforce->xmit.tail;
if (CIRC_SPACE(head, tail, XMIT_SIZE) < n+2) {
warn("not enough space in xmit buffer to send new packet");
spin_unlock_irqrestore(&iforce->xmit_lock, flags);
return -1;
}
empty = head == tail;
XMIT_INC(iforce->xmit.head, n+2);
/*
* Store packet in xmit buffer
*/
iforce->xmit.buf[head] = HI(cmd);
XMIT_INC(head, 1);
iforce->xmit.buf[head] = LO(cmd);
XMIT_INC(head, 1);
c = CIRC_SPACE_TO_END(head, tail, XMIT_SIZE);
if (n < c) c=n;
memcpy(&iforce->xmit.buf[head],
data,
c);
if (n != c) {
memcpy(&iforce->xmit.buf[0],
data + c,
n - c);
}
XMIT_INC(head, n);
spin_unlock_irqrestore(&iforce->xmit_lock, flags);
/*
* If necessary, start the transmission
*/
switch (iforce->bus) {
#ifdef CONFIG_JOYSTICK_IFORCE_232
case IFORCE_232:
if (empty)
iforce_serial_xmit(iforce);
break;
#endif
#ifdef CONFIG_JOYSTICK_IFORCE_USB
case IFORCE_USB:
if (iforce->usbdev && empty &&
!test_and_set_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags)) {
iforce_usb_xmit(iforce);
}
break;
#endif
}
return 0;
}
开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:76，代码来源:iforce-packets.c
示例20: iforce_process_packet
void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data)
{
struct input_dev *dev = iforce->dev;
int i;
static int being_used = 0;
if (being_used)
warn("re-entrant call to iforce_process %d", being_used);
being_used++;
#ifdef CONFIG_JOYSTICK_IFORCE_232
if (HI(iforce->expect_packet) == HI(cmd)) {
iforce->expect_packet = 0;
iforce->ecmd = cmd;
memcpy(iforce->edata, data, IFORCE_MAX_LENGTH);
}
#endif
wake_up(&iforce->wait);
if (!iforce->type) {
being_used--;
return;
}
switch (HI(cmd)) {
case 0x01: /* joystick position data */
case 0x03: /* wheel position data */
if (HI(cmd) == 1) {
input_report_abs(dev, ABS_X, (__s16) (((__s16)data[1] << 8) | data[0]));
input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[3] << 8) | data[2]));
input_report_abs(dev, ABS_THROTTLE, 255 - data[4]);
if (LO(cmd) >= 8 && test_bit(ABS_RUDDER ,dev->absbit))
input_report_abs(dev, ABS_RUDDER, (__s8)data[7]);
} else {
input_report_abs(dev, ABS_WHEEL, (__s16) (((__s16)data[1] << 8) | data[0]));
input_report_abs(dev, ABS_GAS, 255 - data[2]);
input_report_abs(dev, ABS_BRAKE, 255 - data[3]);
}
input_report_abs(dev, ABS_HAT0X, iforce_hat_to_axis[data[6] >> 4].x);
input_report_abs(dev, ABS_HAT0Y, iforce_hat_to_axis[data[6] >> 4].y);
for (i = 0; iforce->type->btn[i] >= 0; i++)
input_report_key(dev, iforce->type->btn[i], data[(i >> 3) + 5] & (1 << (i & 7)));
/* If there are untouched bits left, interpret them as the second hat */
if (i <= 8) {
int btns = data[6];
if (test_bit(ABS_HAT1X, dev->absbit)) {
if (btns & 8) input_report_abs(dev, ABS_HAT1X, -1);
else if (btns & 2) input_report_abs(dev, ABS_HAT1X, 1);
else input_report_abs(dev, ABS_HAT1X, 0);
}
if (test_bit(ABS_HAT1Y, dev->absbit)) {
if (btns & 1) input_report_abs(dev, ABS_HAT1Y, -1);
else if (btns & 4) input_report_abs(dev, ABS_HAT1Y, 1);
else input_report_abs(dev, ABS_HAT1Y, 0);
}
}
input_sync(dev);
break;
case 0x02: /* status report */
input_report_key(dev, BTN_DEAD, data[0] & 0x02);
input_sync(dev);
/* Check if an effect was just started or stopped */
i = data[1] & 0x7f;
if (data[1] & 0x80) {
if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) {
/* Report play event */
input_report_ff_status(dev, i, FF_STATUS_PLAYING);
}
} else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) {
/* Report stop event */
input_report_ff_status(dev, i, FF_STATUS_STOPPED);
}
if (LO(cmd) > 3) {
int j;
for (j = 3; j < LO(cmd); j += 2)
mark_core_as_ready(iforce, data[j] | (data[j+1]<<8));
}
break;
}
being_used--;
}
开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:89，代码来源:iforce-packets.c
注：本文中的LO函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论