本文整理汇总了C++中LOGM函数的典型用法代码示例。如果您正苦于以下问题：C++ LOGM函数的具体用法？C++ LOGM怎么用？C++ LOGM使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了LOGM函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: assert
void moCameraModule::start() {
assert( this->camera == NULL );
LOGM(MO_TRACE, "start camera");
this->camera = cvCaptureFromCAM(this->property("index").asInteger());
if ( this->camera == NULL ) {
LOGM(MO_ERROR, "could not load camera: " << this->property("index").asInteger());
this->setError("Unable to open camera");
}
moModule::start();
}
开发者ID:Giladx，项目名称:Movid，代码行数:11，代码来源:moCameraModule.cpp
示例2: _rmnet_vnd_do_qos_ioctl
static int _rmnet_vnd_do_qos_ioctl(struct net_device *dev,
struct ifreq *ifr,
int cmd)
{
struct rmnet_vnd_private_s *dev_conf;
int rc;
rc = 0;
dev_conf = (struct rmnet_vnd_private_s *) netdev_priv(dev);
switch (cmd) {
case RMNET_IOCTL_SET_QOS_ENABLE:
LOGM("%s(): RMNET_IOCTL_SET_QOS_ENABLE on %s\n",
__func__, dev->name);
dev_conf->qos_mode = 1;
break;
case RMNET_IOCTL_SET_QOS_DISABLE:
LOGM("%s(): RMNET_IOCTL_SET_QOS_DISABLE on %s\n",
__func__, dev->name);
dev_conf->qos_mode = 0;
break;
case RMNET_IOCTL_FLOW_ENABLE:
LOGL("%s(): RMNET_IOCTL_FLOW_ENABLE on %s\n",
__func__, dev->name);
tc_qdisc_flow_control(dev, (u32)ifr->ifr_data, 1);
break;
case RMNET_IOCTL_FLOW_DISABLE:
LOGL("%s(): RMNET_IOCTL_FLOW_DISABLE on %s\n",
__func__, dev->name);
tc_qdisc_flow_control(dev, (u32)ifr->ifr_data, 0);
break;
case RMNET_IOCTL_GET_QOS:
LOGM("%s(): RMNET_IOCTL_GET_QOS on %s\n",
__func__, dev->name);
ifr->ifr_ifru.ifru_data =
(void *)(dev_conf->qos_mode == 1);
break;
default:
rc = -EINVAL;
}
return rc;
}
开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:48，代码来源:rmnet_data_vnd.c
示例3: rmnet_vnd_ioctl
static int rmnet_vnd_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct rmnet_vnd_private_s *dev_conf;
int rc;
rc = 0;
dev_conf = (struct rmnet_vnd_private_s *) netdev_priv(dev);
rc = _rmnet_vnd_do_qos_ioctl(dev, ifr, cmd);
if (rc != -EINVAL)
return rc;
rc = 0;
switch (cmd) {
case RMNET_IOCTL_OPEN:
LOGM("%s(): RMNET_IOCTL_OPEN on %s (ignored)\n",
__func__, dev->name);
break;
case RMNET_IOCTL_CLOSE:
LOGM("%s(): RMNET_IOCTL_CLOSE on %s (ignored)\n",
__func__, dev->name);
break;
case RMNET_IOCTL_SET_LLP_ETHERNET:
LOGM("%s(): RMNET_IOCTL_SET_LLP_ETHERNET on %s (no support)\n",
__func__, dev->name);
rc = -EINVAL;
break;
case RMNET_IOCTL_SET_LLP_IP:
LOGM("%s(): RMNET_IOCTL_SET_LLP_IP on %s (ignored)\n",
__func__, dev->name);
break;
case RMNET_IOCTL_GET_LLP:
LOGM("%s(): RMNET_IOCTL_GET_LLP on %s\n",
__func__, dev->name);
ifr->ifr_ifru.ifru_data = (void *)(RMNET_MODE_LLP_IP);
break;
default:
LOGH("%s(): Unkown IOCTL 0x%08X\n", __func__, cmd);
rc = -EINVAL;
}
return rc;
}
开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:48，代码来源:rmnet_data_vnd.c
示例4: setup_listen
static int APP_CC
setup_listen(void)
{
char port[256];
int error = 0;
if (g_lis_trans != 0)
{
trans_delete(g_lis_trans);
}
if (g_use_unix_socket)
{
g_lis_trans = trans_create(2, 8192, 8192);
g_snprintf(port, 255, "/tmp/.xrdp/xrdp_chansrv_socket_%d",
7200 + g_display_num);
}
else
{
g_lis_trans = trans_create(1, 8192, 8192);
g_snprintf(port, 255, "%d", 7200 + g_display_num);
}
g_lis_trans->trans_conn_in = my_trans_conn_in;
error = trans_listen(g_lis_trans, port);
if (error != 0)
{
LOGM((LOG_LEVEL_ERROR, "setup_listen: trans_listen failed for port %s",
port));
return 1;
}
return 0;
}
开发者ID:eric011，项目名称:xrdp，代码行数:35，代码来源:chansrv.c
示例5: my_trans_conn_in
int DEFAULT_CC
my_trans_conn_in(struct trans *trans, struct trans *new_trans)
{
if (trans == 0)
{
return 1;
}
if (trans != g_lis_trans)
{
return 1;
}
if (g_con_trans != 0) /* if already set, error */
{
return 1;
}
if (new_trans == 0)
{
return 1;
}
LOGM((LOG_LEVEL_DEBUG, "my_trans_conn_in:"));
g_con_trans = new_trans;
g_con_trans->trans_data_in = my_trans_data_in;
g_con_trans->header_size = 8;
/* stop listening */
trans_delete(g_lis_trans);
g_lis_trans = 0;
return 0;
}
开发者ID:eric011，项目名称:xrdp，代码行数:32，代码来源:chansrv.c
示例6: my_trans_data_in
/* returns error */
int DEFAULT_CC
my_trans_data_in(struct trans *trans)
{
struct stream *s = (struct stream *)NULL;
int id = 0;
int size = 0;
int error = 0;
if (trans == 0)
{
return 0;
}
if (trans != g_con_trans)
{
return 1;
}
LOGM((LOG_LEVEL_DEBUG, "my_trans_data_in:"));
s = trans_get_in_s(trans);
in_uint32_le(s, id);
in_uint32_le(s, size);
error = trans_force_read(trans, size - 8);
if (error == 0)
{
/* here, the entire message block is read in, process it */
error = process_message();
}
return error;
}
开发者ID:eric011，项目名称:xrdp，代码行数:33，代码来源:chansrv.c
示例7: process_message
/* returns error */
static int APP_CC
process_message(void)
{
struct stream *s = (struct stream *)NULL;
int size = 0;
int id = 0;
int rv = 0;
char *next_msg = (char *)NULL;
if (g_con_trans == 0)
{
return 1;
}
s = trans_get_in_s(g_con_trans);
if (s == 0)
{
return 1;
}
rv = 0;
while (s_check_rem(s, 8))
{
next_msg = s->p;
in_uint32_le(s, id);
in_uint32_le(s, size);
next_msg += size;
switch (id)
{
case 1: /* init */
rv = process_message_init(s);
break;
case 3: /* channel setup */
rv = process_message_channel_setup(s);
break;
case 5: /* channel data */
rv = process_message_channel_data(s);
break;
case 7: /* channel data response */
rv = process_message_channel_data_response(s);
break;
default:
LOGM((LOG_LEVEL_ERROR, "process_message: error in process_message ",
"unknown msg %d", id));
break;
}
if (rv != 0)
{
break;
}
s->p = next_msg;
}
return rv;
}
开发者ID:eric011，项目名称:xrdp，代码行数:61，代码来源:chansrv.c
示例8: assert
void moVideoModule::start() {
assert( this->video == NULL );
LOGM(MO_TRACE, "start video");
this->video = cvCaptureFromAVI(this->property("filename").asString().c_str());
this->numframes = (int)cvGetCaptureProperty(static_cast<CvCapture *>(this->video), CV_CAP_PROP_FRAME_COUNT);
moModule::start();
}
开发者ID:Giladx，项目名称:Movid，代码行数:7，代码来源:moVideoModule.cpp
示例9: OstTrace0
// ---------------------------------------------------------
// CDpDataBuffer::Flush
// This method empties the buffer and notifies waiting reader
// and writer about the flush.
// ---------------------------------------------------------
//
void CDpDataBuffer::Flush()
{
OstTrace0( TRACE_NORMAL, CDPDATABUFFER_FLUSH, "CDpDataBuffer::Flush" );
LOGM(" CDpDataBuffer::Flush");
// throw reader out
//signal waiting reader
if ( iIsReaderWaiting && iReader )
{
iReader->FlushNotify();
iIsReaderWaiting = EFalse;
}
// throw writer out
//signal waiting writer
if ( iIsWriterWaiting && iWriter )
{
iWriter->FlushNotify();
iIsWriterWaiting = EFalse;
}
// As (currently) data accesses to buffer are synchronous, there can be no
// data client accessing the buffer.
iEnd = 0;
iHead = 0;
iTail = 0;
iTailWhenWrappedAround = 0;
iBuf->Des().Fill( KDpFillChar );
}
开发者ID:wannaphongcom，项目名称:symbian-incubation-projects.fcl-modemadaptation，代码行数:36，代码来源:dpdatabuffer.cpp
示例10: LOGM
void RenderingModule::OnWindowSizeChanged(UINT32 p_uiWidth, UINT32 p_uiHeight, bool p_bMinimized)
{
LOGM("Window size changed event received. Width=" << p_uiWidth << " Height=" << p_uiHeight << " Minimized=" << p_bMinimized, Info);
m_bWindowMinimized = p_bMinimized;
m_API->OnWindowSizeChanged(p_uiWidth, p_uiHeight);
m_bWindowTransition = false;
}
开发者ID:dragonmoose，项目名称:Project2016，代码行数:7，代码来源:RenderingModule.cpp
示例11: rmnet_vnd_create_dev
int rmnet_vnd_create_dev(int id, struct net_device **new_device)
{
struct net_device *dev;
int rc = 0;
if (id < 0 || id > RMNET_DATA_MAX_VND || rmnet_devices[id] != 0) {
*new_device = 0;
return -EINVAL;
}
dev = alloc_netdev(sizeof(struct rmnet_vnd_private_s),
RMNET_DATA_DEV_NAME_STR,
rmnet_vnd_setup);
if (!dev) {
LOGE("%s(): Failed to to allocate netdev for id %d",
__func__, id);
*new_device = 0;
return -EINVAL;
}
rc = register_netdevice(dev);
if (rc != 0) {
LOGE("%s(): Failed to to register netdev [%s]",
__func__, dev->name);
free_netdev(dev);
*new_device = 0;
} else {
rmnet_devices[id] = dev;
*new_device = dev;
}
LOGM("%s(): Registered device %s\n", __func__, dev->name);
return rc;
}
开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:34，代码来源:rmnet_data_vnd.c
示例12: rmnet_vnd_setup
static void rmnet_vnd_setup(struct net_device *dev)
{
struct rmnet_vnd_private_s *dev_conf;
LOGM("%s(): Setting up device %s\n", __func__, dev->name);
dev_conf = (struct rmnet_vnd_private_s *) netdev_priv(dev);
memset(dev_conf, 0, sizeof(struct rmnet_vnd_private_s));
dev->flags |= IFF_NOARP;
dev->netdev_ops = &rmnet_data_vnd_ops;
dev->mtu = RMNET_DATA_DFLT_PACKET_SIZE;
dev->needed_headroom = RMNET_DATA_NEEDED_HEADROOM;
random_ether_addr(dev->dev_addr);
dev->watchdog_timeo = 1000;
dev->header_ops = 0;
dev->type = ARPHRD_RAWIP;
dev->hard_header_len = 0;
dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST);
rwlock_init(&dev_conf->flows.flow_map_lock);
}
开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:26，代码来源:rmnet_data_vnd.c
示例13: cvCreateImage
void moBlobTrackerModule::allocateBuffers() {
IplImage* src = static_cast<IplImage*>(this->input->getData());
if ( src == NULL )
return;
this->output_buffer = cvCreateImage(cvGetSize(src), src->depth, 3);
LOGM(MO_TRACE, "allocated output buffer for BlobTracker module.");
}
开发者ID:bernt，项目名称:Movid，代码行数:7，代码来源:moBlobTrackerModule.cpp
示例14: send_channel_data
/* returns error */
int APP_CC
send_channel_data(int chan_id, char *data, int size)
{
int index;
//g_writeln("send_channel_data chan_id %d size %d", chan_id, size);
LOGM((LOG_LEVEL_DEBUG, "chansrv::send_channel_data: size %d", size));
if (chan_id == -1)
{
g_writeln("send_channel_data: error, chan_id is -1");
return 1;
}
for (index = 0; index < g_num_chan_items; index++)
{
if (g_chan_items[index].id == chan_id)
{
add_data_to_chan_item(g_chan_items + index, data, size);
check_chan_items();
return 0;
}
}
return 1;
}
开发者ID:eric011，项目名称:xrdp，代码行数:28，代码来源:chansrv.c
示例15: rmnet_map_command
/**
* rmnet_map_command() - Entry point for handling MAP commands
* @skb: Socket buffer containing the MAP command message
* @config: Physical end-point configuration of ingress device
*
* Process MAP command frame and send N/ACK message as appropriate. Message cmd
* name is decoded here and appropriate handler is called.
*
* Return:
* - RX_HANDLER_CONSUMED. Command frames are always consumed.
*/
rx_handler_result_t rmnet_map_command(struct sk_buff *skb,
struct rmnet_phys_ep_conf_s *config)
{
struct rmnet_map_control_command_s *cmd;
unsigned char command_name;
unsigned char rc = 0;
if (unlikely(!skb))
BUG();
cmd = RMNET_MAP_GET_CMD_START(skb);
command_name = cmd->command_name;
if (command_name < RMNET_MAP_COMMAND_ENUM_LENGTH)
rmnet_map_command_stats[command_name]++;
switch (command_name) {
case RMNET_MAP_COMMAND_FLOW_ENABLE:
rc = rmnet_map_do_flow_control(skb, config, 1);
break;
case RMNET_MAP_COMMAND_FLOW_DISABLE:
rc = rmnet_map_do_flow_control(skb, config, 0);
break;
default:
rmnet_map_command_stats[RMNET_MAP_COMMAND_UNKNOWN]++;
LOGM("Uknown MAP command: %d", command_name);
rc = RMNET_MAP_COMMAND_UNSUPPORTED;
break;
}
rmnet_map_send_ack(skb, rc, config);
return RX_HANDLER_CONSUMED;
}
开发者ID:benschhold，项目名称:android_kernel_oneplus_msm8994_custom，代码行数:45，代码来源:rmnet_map_command.c
示例16: OstTrace0
// ---------------------------------------------------------
// This method notifies that buffer is flushed. Classes which have access
// to buffers are derived from this class. Derived class could override
// this method, otherwise this default method will be used.
// release this cactive object
// ---------------------------------------------------------
//
void CDpDte2Tx::FlushNotify()
{
OstTrace0( TRACE_NORMAL, CDPDTE2TX_FLUSHNOTIFY, "CDpDte2Tx::FlushNotify" );
LOGM(" CDpDte2Tx::FlushNotify()");
ReleaseNotify();
}
开发者ID:wannaphongcom，项目名称:symbian-incubation-projects.fcl-modemadaptation，代码行数:14，代码来源:dpdte2tx.cpp
示例17: _RMNET_NETLINK_NULL_CHECKS
static void _rmnet_netlink_add_del_vnd_tc_flow
(uint32_t command,
struct rmnet_nl_msg_s *rmnet_header,
struct rmnet_nl_msg_s *resp_rmnet)
{
uint32_t id;
uint32_t map_flow_id;
uint32_t tc_flow_id;
_RMNET_NETLINK_NULL_CHECKS();
resp_rmnet->crd = RMNET_NETLINK_MSG_RETURNCODE;
id = rmnet_header->flow_control.id;
map_flow_id = rmnet_header->flow_control.map_flow_id;
tc_flow_id = rmnet_header->flow_control.tc_flow_id;
switch (command) {
case RMNET_NETLINK_ADD_VND_TC_FLOW:
resp_rmnet->return_code = rmnet_vnd_add_tc_flow(id,
map_flow_id,
tc_flow_id);
break;
case RMNET_NETLINK_DEL_VND_TC_FLOW:
resp_rmnet->return_code = rmnet_vnd_del_tc_flow(id,
map_flow_id,
tc_flow_id);
break;
default:
LOGM("Called with unhandled command %d", command);
resp_rmnet->return_code = RMNET_CONFIG_INVALID_REQUEST;
break;
}
}
开发者ID:BeastOn，项目名称:yu_msm8916，代码行数:33，代码来源:rmnet_data_config.c
示例18: OstTrace0
// -----------------------------------------------------------------------------
// CDpPn2Rx::FlushNotify
// This method notifies that buffer is flushed. Classes which have access
// to buffers are derived from this class. Derived class could override
// this method, otherwise this default method will be used.
// -----------------------------------------------------------------------------
//
void CDpPn2Rx::FlushNotify()
{
OstTrace0( TRACE_NORMAL, CDPPN2RX_FLUSHNOTIFY, "CDpPn2Rx::FlushNotify" );
LOGM("CDpPn2Rx::FlushNotify()");
ReleaseNotify();
}
开发者ID:wannaphongcom，项目名称:symbian-incubation-projects.fcl-modemadaptation，代码行数:14，代码来源:dppn2rx.cpp
示例19: OstTrace0
// ---------------------------------------------------------
// CDpMif::DoCancel
// This method cancels Isc Api receive.
// ---------------------------------------------------------
//
void CDpMif::DoCancel()
{
OstTrace0( TRACE_NORMAL, CDPMIF_DOCANCEL, "CDpMif::DoCancel" );
LOGM(" CDpMif::DoCancel");
iDataPort.ISAHandle().ReceiveCancel();
}
开发者ID:wannaphongcom，项目名称:symbian-incubation-projects.fcl-modemadaptation，代码行数:12，代码来源:dpmif.cpp
示例20: assert
void moCameraModule::start() {
assert( this->camera == NULL );
LOGM(MO_TRACE, "start camera");
this->camera = cvCaptureFromCAM(this->property("index").asInteger());
if ( this->camera == NULL ) {
LOGM(MO_ERROR, "could not load camera: " << this->property("index").asInteger());
this->setError("Unable to open camera");
}
cvSetCaptureProperty((CvCapture*)this->camera, CV_CAP_PROP_BRIGHTNESS, .01);
cvSetCaptureProperty((CvCapture*)this->camera, CV_CAP_PROP_EXPOSURE, 0);
//cvSetCaptureProperty((CvCapture*)this->camera, CV_CAP_PROP_SATURATION, 255);
moModule::start();
}
开发者ID:OpaqueMegane，项目名称:flatland-arg，代码行数:16，代码来源:moCameraModule.cpp
注：本文中的LOGM函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论