C++ LOG_I函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中LOG_I函数的典型用法代码示例。如果您正苦于以下问题：C++ LOG_I函数的具体用法？C++ LOG_I怎么用？C++ LOG_I使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了LOG_I函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ClearActiveD2Ds

static void ClearActiveD2Ds(void)
{
	unsigned int i;
	LOG_I("%s: Enter.", __func__);
	for (i = 0; i < ARRAY_SIZE(u8540_d2ds); i++) {
		u8540_d2ds[i].active = false;
	}
}

开发者ID:DevSwift，项目名称:android_device_sony_kumquat-2，代码行数:8，代码来源:alsactrl_hwh_u8540_d2d.c

示例2: open_chardev

static int open_chardev(void)
{
	LOG_I("Enter.");

	if (chardev_fd >= 0) {
		LOG_I("Char-dev already open!");
		return 0;
	}

	chardev_fd = open("/dev/" CG2900_AUDIO_DEVICE_NAME, O_RDWR);
	if (chardev_fd < 0) {
		LOG_E("ERROR: Failed to open device (%s)!", strerror(errno));
		return -1;
	} else {
		return 0;
	}
}

开发者ID:DevSwift，项目名称:android_device_sony_kumquat-2，代码行数:17，代码来源:alsactrl_fm.c

示例3: new_module

/*!\fn openair0_device new_module (unsigned int id, dev_type_t type)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup  _oai
*/
static rrh_module_t new_module (unsigned int id) {

  rrh_module_t 	  	rrh_mod;
  openair0_config_t 	openair0_cfg;

  rrh_mod.id=id;
  rrh_mod.loopback=loopback_flag;
  rrh_mod.measurements=measurements_flag;

  /* each module is associated with an ethernet device */
  rrh_mod.eth_dev.type=ETH_IF;
  rrh_mod.eth_dev.func_type=RRH_FUNC; 
  get_ip_address(if_name);
  openair0_cfg.my_ip=&rrh_ip[0];
  openair0_cfg.my_port=rrh_port;

  /* ethernet device initialization */
  if (openair0_dev_init_eth(&rrh_mod.eth_dev, &openair0_cfg)<0){
    LOG_E(RRH,"Exiting, cannot initialize ethernet interface.\n");
    exit(-1);
  }
 
  /* specify associated RF device */
  openair0_device *oai_dv = (openair0_device *)malloc(sizeof(openair0_device));
  memset(oai_dv,0, sizeof(openair0_device));

#ifdef EXMIMO
  rrh_mod.devs=oai_dv;   
  rrh_mod.devs->type=EXMIMO_IF;
  LOG_I(RRH,"Setting RF device to EXMIMO\n");	   
#elif OAI_USRP
  rrh_mod.devs=oai_dv;	
  rrh_mod.devs->type=USRP_IF;
  LOG_I(RRH,"Setting RF device to USRP\n");    	 
#elif OAI_BLADERF
  rrh_mod.devs=oai_dv;	
  rrh_mod.devs->type=BLADERF_IF;
  LOG_I(RRH,"Setting RF device to BLADERF\n");
#else
  rrh_mod.devs=oai_dv;
  rrh_mod.devs->type=NONE_IF;
  LOG_I(RRH,"Setting RF interface to NONE_IF... \n");
#endif  
  
  return rrh_mod;
}

开发者ID:sdnnfv，项目名称:openair4G，代码行数:54，代码来源:rrh_gw.c

示例4: main

int main()
{
    ScUuid * uuid1 = NULL;
    ScUuid * uuid2 = NULL;
    ScUuid * uuid3 = NULL;
    //char p1[SC_UUID_LEN] = { 0 };
    //char p2[SC_UUID_LEN] = { 0 };
    //char p3[SC_UUID_LEN] = { 0 };

    LOG_OPEN(NULL);

    uuid1 = ScUuid_New();
    ScUuid_GenerateRandom(uuid1);
    LOG_I("test", "UUID 1: %s", ScUuid_ToString(uuid1, true));

    uuid2 = ScUuid_New();
    ScUuid_GenerateRandom(uuid2);
    LOG_I("test", "UUID 2: %s", ScUuid_ToString(uuid2, true));

    LOG_I("test", "UUID 2: %s", ScUuid_ToString(uuid2, false));

    LOG_I("test", "UUID1 and UUID2 is %s", ScUuid_Equal(uuid1, uuid2) ? "equal" : "not equal");

    ScUuid_Clear(uuid1);
    LOG_I("test", "UUID1 clear, UUID1 : %s", ScUuid_IsNull(uuid1) ? "is NULL" : "is Not NULL");

    LOG_I("test", "UUID1 and UUID2 is %s", ScUuid_Equal(uuid1, uuid2) ? "equal" : "not equal");

    uuid3 = ScUuid_New();
    ScUuid_Copy(uuid3, uuid2);

    LOG_I("test", "clone from UUID2, UUID3: %s", ScUuid_ToString(uuid3, true));

    LOG_I("test", "UUID2 and UUID3 is %s", ScUuid_Equal(uuid2, uuid3) ? "equal" : "not equal");
    
    test_uuid("4A5BFD77-D452-4492-B973-69198200339", false);
	test_uuid("84949cc5-4701-4a84-895b-354c584a981b", true);
	test_uuid("84949SC5-4701-4A84-895B-354C584A981B", true);
    test_uuid("84949cc5-4701-4a84-895b-354c584a981bc", false);
    test_uuid("84949cc5-4701-4a84-895b-354c584a981", false);
    test_uuid("84949cc5x4701-4a84-895b-354c584a981b", false);
    test_uuid("84949cc504701-4a84-895b-354c584a981b", false);
    test_uuid("84949cc5-470104a84-895b-354c584a981b", false);
    test_uuid("84949cc5-4701-4a840895b-354c584a981b", false);
    test_uuid("84949cc5-4701-4a84-895b0354c584a981b", false);
    test_uuid("g4949cc5-4701-4a84-895b-354c584a981b", false);
    test_uuid("84949cc5-4701-4a84-895b-354c584a981g", false);

    ScUuid_Delete(uuid1);
    ScUuid_Delete(uuid2);
    ScUuid_Delete(uuid3);

    LOG_CLOSE();

    return 0;
}

开发者ID:jxfengzi，项目名称:UpnpLan，代码行数:56，代码来源:test.c

示例5: LOG_I

//------------------------------------------------------------------------------
void MobiCoreDriverDaemon::run(
	void
) {
	LOG_I("Daemon starting up...");
	LOG_I("Socket interface version is %u.%u", DAEMON_VERSION_MAJOR, DAEMON_VERSION_MINOR);
#ifdef MOBICORE_COMPONENT_BUILD_TAG
	LOG_I("%s", MOBICORE_COMPONENT_BUILD_TAG);
#else
	#warning "MOBICORE_COMPONENT_BUILD_TAG is not defined!"
#endif
	LOG_I("Build timestamp is %s %s", __DATE__, __TIME__);

	int i;

	mobiCoreDevice = getDeviceInstance();

	LOG_I("Daemon scheduler is %s", enableScheduler? "enabled" : "disabled");
	if(!mobiCoreDevice->initDevice(
		MC_DRV_MOD_DEVNODE_FULLPATH,
		loadMobicore,
		mobicoreImage.c_str(),
		enableScheduler)) {
		LOG_E("%s: Failed to initialize MobiCore!", __FUNCTION__);
		return;
	}
	mobiCoreDevice->start();

	checkMobiCoreVersion(mobiCoreDevice);

	if (donateRamSize > 0) {
		// Donate additional RAM to MC
		LOG_I("Donating %u Kbytes to Mobicore", donateRamSize / 1024);
		mobiCoreDevice->donateRam(donateRamSize);
	}

	// Load device driver if requested
	if (loadDriver) {
		loadDeviceDriver(driverPath);
	}

	LOG_I("Servers will be created!");
	// Start listening for incoming TLC connections
	servers[0] = new NetlinkServer(this);
	servers[1] = new Server(this, SOCK_PATH);
	LOG_I("Servers created!");

	// Start all the servers
	for (i = 0; i < MAX_SERVERS; i++) {
		servers[i]->start();
	}

	// then wait for them to exit
	for (i = 0; i < MAX_SERVERS; i++) {
		servers[i]->join();
	}
}

开发者ID:Hunter78rus，项目名称:tee-mobicore-driver，代码行数:57，代码来源:MobiCoreDriverDaemon.cpp

示例6: start_stream

static int start_stream(enum cg2900_audio_endpoint_id ep1,
			enum cg2900_audio_endpoint_id ep2)
{
	LOG_I("Enter.");

	int error = 0;
	unsigned int data[2];
	unsigned char *buf;
	size_t len;
	ssize_t r;

	if (stream_handle != 0xffffffff) {
		LOG_I("Tear down old stream.");
		/* tear down old stream first */
		stop_stream();
	}

	len = 4 + sizeof(ep1) + sizeof(ep2);
	buf = (unsigned char *)malloc(len);
	if (!buf) {
		LOG_E("Error: Out of memory!");
		return -1;
	}
	memset(buf, 0, len);
	buf[0] = CHAR_DEV_OP_CODE_CONNECT_AND_START_STREAM;
	memcpy(buf + 4, &ep1, sizeof(ep1));
	memcpy(buf + 4 + sizeof(ep1), &ep2, sizeof(ep2));

	r = write(chardev_fd, buf, len);
	free(buf);
	if (r != (ssize_t)len) {
		LOG_E("ERROR: Start stream failed (%s)", (r < 0) ? strerror(errno) : "Internal error");
		return -1;
	}

	r = read(chardev_fd, data, sizeof(data));
	if ((unsigned int)r < sizeof(data)) {
		LOG_E("ERROR: Start stream failed (%s)!", (r < 0) ? strerror(errno) : "Internal error");
		error = -1;
	} else {
		stream_handle = data[1];
	}

	return error;
}

开发者ID:DevSwift，项目名称:android_device_sony_kumquat-2，代码行数:45，代码来源:alsactrl_fm.c

示例7: LOG_V

Encode_Status VideoEncoderH263::renderSliceParams(EncodeTask *task) {

    VAStatus vaStatus = VA_STATUS_SUCCESS;
    uint32_t sliceHeight;
    uint32_t sliceHeightInMB;

    LOG_V("Begin\n\n");

    sliceHeight = mComParams.resolution.height;
    sliceHeight += 15;
    sliceHeight &= (~15);
    sliceHeightInMB = sliceHeight / 16;

    vaStatus = vaCreateBuffer(
            mVADisplay, mVAContext,
            VAEncSliceParameterBufferType,
            sizeof(VAEncSliceParameterBuffer),
            1, NULL, &mSliceParamBuf);
    CHECK_VA_STATUS_RETURN("vaCreateBuffer");

    VAEncSliceParameterBuffer *sliceParams;
    vaStatus = vaMapBuffer(mVADisplay, mSliceParamBuf, (void **)&sliceParams);
    CHECK_VA_STATUS_RETURN("vaMapBuffer");

    // starting MB row number for this slice
    sliceParams->start_row_number = 0;
    // slice height measured in MB
    sliceParams->slice_height = sliceHeightInMB;
    sliceParams->slice_flags.bits.is_intra = (task->type == FTYPE_I)?1:0;
    sliceParams->slice_flags.bits.disable_deblocking_filter_idc = 0;

    LOG_V("======h263 slice params======\n");
    LOG_I("start_row_number = %d\n", (int) sliceParams->start_row_number);
    LOG_I("slice_height_in_mb = %d\n", (int) sliceParams->slice_height);
    LOG_I("slice.is_intra = %d\n", (int) sliceParams->slice_flags.bits.is_intra);

    vaStatus = vaUnmapBuffer(mVADisplay, mSliceParamBuf);
    CHECK_VA_STATUS_RETURN("vaUnmapBuffer");

    vaStatus = vaRenderPicture(mVADisplay, mVAContext, &mSliceParamBuf, 1);
    CHECK_VA_STATUS_RETURN("vaRenderPicture");

    LOG_V("end\n");
    return ENCODE_SUCCESS;
}

开发者ID:yutokt，项目名称:android_vendor_intel，代码行数:45，代码来源:VideoEncoderH263.cpp

示例8: packet_gen_socket

char* packet_gen_socket(int src, int dst, int state, int ctime){ 

	int size;
	char *payload=NULL;
	

	set_ctime(ctime);	
	LOG_I(OTG,"SOCKET :: num_nodes_tx:: %d , seed:: %d \n", g_otg->num_nodes, g_otg->seed);

	LOG_I(OTG,"SOCKET :: NODE_INFO (Source= %d, Destination= %d,State= %d) ctime %d \n", src, dst, state, otg_info->ctime);


	LOG_I(OTG,"SOCKET :: INFO_SIM (src=%d, dst=%d, state=%d) application=%d, idt dist =%d, pkts dist= %d\n", src, dst, state, g_otg->application_type[src][dst], g_otg->idt_dist[src][dst][state], g_otg->size_dist[src][dst][state]);

	LOG_I(OTG,"SOCKET :: Transmission info: idt=%d, simulation time=%d \n", otg_info->idt[src][dst], ctime); 
	// do not generate packet for this pair of src, dst : no app type and/or idt are defined	
	if ((g_otg->application_type[src][dst] == 0) && (g_otg->idt_dist[src][dst][0] == 0)){
        	LOG_I(OTG,"SOCKET :: Do not generate packet for this pair of src=%d, dst =%d: no app type and/or idt are defined\n", src, dst); 
		return 0;	 
	}

//pre-config for the standalone
	if (ctime<otg_info->ptime[src][dst][state]) //it happends when the emulation was finished
		otg_info->ptime[src][dst][state]=ctime;
	if (ctime==0)
	otg_info->idt[src][dst]=0; //for the standalone mode: the emulation is run several times, we need to initialise the idt to 0 when ctime=0
//end pre-config

	if ((otg_info->idt[src][dst]==(ctime-otg_info->ptime[src][dst][state])) || (otg_info->idt[src][dst]==0)) {
			
		   LOG_I(OTG,"SOCKET :: Time To Transmit (Source= %d, Destination= %d,State= %d) , (IDT= %d ,simu time= %d, previous packet time= %d) \n", src, dst, state ,otg_info->idt[src][dst], ctime, otg_info->ptime[src][dst][state]); 
		   otg_info->ptime[src][dst][state]=ctime;	
		   otg_info->idt[src][dst]=time_dist(src, dst, state); // update the idt for the next otg_tx
		}
		else {
		   LOG_I(OTG,"SOCKET :: It is not the time to transmit (ctime= %d, previous time=%d, packet idt=%d),  node( %d,%d) \n", ctime,otg_info->ptime[src][dst][state], otg_info->idt[src][dst], src, dst);  
		   return 0; // do not generate the packet, and keep the idt
			}

	

	size=size_dist(src, dst, state);	
	LOG_I(OTG,"SOCKET :: Generate Packet for (Source= %d, Destination= %d,State= %d) , pkt size dist= %d, simu time= %d ,packet size=%d \n",
	src, dst, state, g_otg->size_dist[src][dst][state], otg_info->ctime, size);

	if (size>(5* sizeof(int)))		
		size=size-(5* sizeof(int));
	else
		size=(5* sizeof(int))+10;

	payload=payload_pkts(size);

return(payload);

}

开发者ID:mspublic，项目名称:openair4G-mirror，代码行数:55，代码来源:otg_tx_socket.c

示例9: rx_loss_rate_bytes

void rx_loss_rate_bytes(int src, int dst, int application){

  if (otg_info->rx_num_pkt[src][dst][application]<otg_info->tx_num_pkt[src][dst][application])
    otg_info->rx_loss_rate[src][dst][application]= 1 - ((double)otg_info->rx_num_bytes[src][dst][application]/otg_info->tx_num_bytes[src][dst][application]);
  else
    otg_info->rx_loss_rate[src][dst][application]=0;
  LOG_I(OTG, "loss rate (src=%d, dst=%d, appli %d ):: = %lf(bytes) \n",src, dst, application, otg_info->rx_loss_rate[src][dst][application]);

}

开发者ID:ppenumarthi，项目名称:openair，代码行数:9，代码来源:otg_kpi.c

示例10: LOG_I

OMX_BOOL AlsaSink::isPcmProbeEnabled(OMX_U32 portIdx)
{
	LOG_I("Enter.\n");

	if (portIdx > 1)
		return OMX_FALSE;

	return mPcmProbeEnabled[portIdx];
}

开发者ID:Meticulus，项目名称:vendor_st-ericsson_u8500，代码行数:9，代码来源:AlsaSink.cpp

示例11: minus

// -------------------------------------------------------------
mcResult_t minus(uint32_t *num1, uint32_t *num2, uint32_t *result)
{
    mcResult_t  ret;

	LOG_I("Foo perform minus (%d) - (%d)", *num2, *num1);
    
    ret = executeCmd(num1, num2, result, CMD_FOO_SUB);
    if (ret != RET_OK) 
    {
        LOG_E("Unable to execute CMD_FOO_SUB command: %d", ret);
        goto exit;
    }   

    LOG_I("The result is %d", *result);

exit:    
    return ret;
}

开发者ID:jeremy636，项目名称:mytest，代码行数:19，代码来源:tlcfoo.cpp

示例12: add

// -------------------------------------------------------------
mcResult_t add(uint32_t *num1, uint32_t *num2, uint32_t *result)
{
    mcResult_t  ret;

	LOG_I("Foo perform addition (%d) + (%d)", *num1, *num2);
    
    ret = executeCmd(num1, num2, result, CMD_FOO_ADD);
    if (ret != RET_OK) 
    {
        LOG_E("Unable to execute CMD_FOO_ADD command: %d", ret);
        goto exit;
    }   

    LOG_I("The result is %d", *result);

exit:    
    return ret;
}

开发者ID:jeremy636，项目名称:mytest，代码行数:19，代码来源:tlcfoo.cpp

示例13: testUtf8

void testUtf8(){
    std::string chutf8 = "这是一个字符串";
    auto s = XUtf8::utf8ToUnicode(chutf8);
    LOG_I(s.c_str());
    std::string utf8 = XUtf8::unicodeToUtf8("0x8fd9");
    LOG_I(utf8.c_str());
    byte buffer[] = {0350, 0377, 0231};
    bool isValid = XUtf8::isValidUtf8Buffer(buffer, 3);
    LOG_I(u8"

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ LOG_INF函数代码示例发布时间：2022-05-30

C++ LOG_FUNC_RETURN函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

2023-10-27

florent37/ViewAnimator: A fluent Android

2022-08-15

florent37/Shrine-MaterialDesign2: implem

2022-08-17

CVE-2020-36276

2022-09-23

SimpleSoftwareIO/simple-sms: Send and re

2022-08-13

阅读排行榜

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18231|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9664|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8174|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8546|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8452|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9381|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8423|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7856|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8408|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7393|2022-11-06

客服电话

电子邮件

C++ LOG_I函数代码示例

示例1: ClearActiveD2Ds

示例2: open_chardev

示例3: new_module

示例4: main

示例5: LOG_I

示例6: start_stream

示例7: LOG_V

示例8: packet_gen_socket

示例9: rx_loss_rate_bytes

示例10: LOG_I

示例11: minus

示例12: add

示例13: testUtf8

请发表评论

全部评论

上一篇：

下一篇：

MikeMcQuaid/strap:

headcr4sh/node-maven: Maven for Node.js

CVE-2022-26527

traex/RippleEffect: Implementation of Ri

pravega/zookeeper-operator: Kubernetes O

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053