C++ LoadPath函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中LoadPath函数的典型用法代码示例。如果您正苦于以下问题：C++ LoadPath函数的具体用法？C++ LoadPath怎么用？C++ LoadPath使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了LoadPath函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: LoadPath

void WaypointMovementGenerator<Creature>::InitializeWaypointPath(Creature& u, int32 id, WaypointPathOrigin wpSource, uint32 initialDelay, uint32 overwriteEntry)
{
    LoadPath(u, id, wpSource, overwriteEntry);
    i_nextMoveTime.Reset(initialDelay);
    // Start moving if possible
    StartMove(u);
}

开发者ID:mangostwo，项目名称:server，代码行数:7，代码来源:WaypointMovementGenerator.cpp

示例2: StopPath

void SmartAI::StartPath(bool run, uint32 path, bool repeat, Unit* /*invoker*/)
{
    if (me->isInCombat())// no wp movement in combat
    {
        sLog->outError("SmartAI::StartPath: Creature entry %u wanted to start waypoint movement while in combat, ignoring.", me->GetEntry());
        return;
    }
    if (HasEscortState(SMART_ESCORT_ESCORTING))
        StopPath();
    if (path)
        if (!LoadPath(path))
            return;
    if (!mWayPoints || mWayPoints->empty())
        return;

    AddEscortState(SMART_ESCORT_ESCORTING);
    mCanRepeatPath = repeat;

    SetRun(run);

    WayPoint* wp = GetNextWayPoint();
    if (wp)
    {
        me->GetPosition(&mLastOOCPos);
        me->GetMotionMaster()->MovePoint(wp->id, wp->x, wp->y, wp->z);
        GetScript()->ProcessEventsFor(SMART_EVENT_WAYPOINT_START, NULL, wp->id, GetScript()->GetPathId());
    }
}

开发者ID:AdrElecTro，项目名称:TrinityCore，代码行数:28，代码来源:SmartAI.cpp

示例3: LoadPath

void WaypointMovementGenerator<Creature>::Reset(Creature &creature)
{
    i_path = NULL;
	LoadPath(creature);
    SetStoppedByPlayer(false);
    i_nextMoveTime.Reset(0);
    creature.addUnitState(UNIT_STAT_ROAMING|UNIT_STAT_ROAMING_MOVE);
}

开发者ID:AwkwardDev，项目名称:MangosFX，代码行数:8，代码来源:WaypointMovementGenerator.cpp

示例4: atunnel_InitTunnel

/*=================== Tunnel Initialization ================================*/
struct tunnel_state *
atunnel_InitTunnel(void)
{
    struct tunnel_state *st = (struct tunnel_state *) calloc (1, sizeof(*st));
	LoadPath(st);
	st->current_texture = NRAND(MAX_TEXTURE);
    return st;
}

开发者ID:MaddTheSane，项目名称:xscreensaver，代码行数:9，代码来源:tunnel_draw.c

示例5: LoadPath

void WaypointMovementGenerator<Creature>::Initialize(Creature& creature)
{
    creature.addUnitState(UNIT_STAT_ROAMING);
    creature.clearUnitState(UNIT_STAT_WAYPOINT_PAUSED);

    LoadPath(creature);

    StartMoveNow(creature);
}

开发者ID:SakhWoW，项目名称:blizzlikecore，代码行数:9，代码来源:WaypointMovementGenerator.cpp

示例6: LoadPath

void
FlightPathMovementGenerator::Initialize(Player &player)
{
    player.getHostilRefManager().setOnlineOfflineState(false);
    player.addUnitState(UNIT_STAT_IN_FLIGHT);
    LoadPath(player);
    i_currentNode = 0;
    Traveller<Player> traveller(player);
    // do not send movement, it was sent already
    i_destinationHolder.SetDestination(traveller, i_path[i_currentNode].x, i_path[i_currentNode].y, i_path[i_currentNode].z, false);
}

开发者ID:Artea，项目名称:mangos-svn，代码行数:11，代码来源:WaypointMovementGenerator.cpp

示例7: LoadPath

void WaypointMovementGenerator<Creature>::DoInitialize(Creature* owner)
{
    if (!owner)
        return;

    if (!owner->isAlive())
        return;

    LoadPath(owner);
    owner->AddUnitState(UNIT_STATE_ROAMING | UNIT_STATE_ROAMING_MOVE);
}

开发者ID:concept45，项目名称:Core，代码行数:11，代码来源:WaypointMovementGenerator.cpp

示例8: LoadPath

void FlightPathMovementGenerator::Initialize(Player &player)
{
    player.getHostilRefManager().setOnlineOfflineState(false);
    player.addUnitState(UNIT_STAT_IN_FLIGHT);
    player.SetFlag(UNIT_FIELD_FLAGS,UNIT_FLAG_DISABLE_MOVE | UNIT_FLAG_TAXI_FLIGHT);
    LoadPath(player);
    Traveller<Player> traveller(player);
    // do not send movement, it was sent already
    i_destinationHolder.SetDestination(traveller, i_path[i_currentNode].x, i_path[i_currentNode].y, i_path[i_currentNode].z, false);

    player.SendMonsterMoveByPath(GetPath(),GetCurrentNode(),GetPathAtMapEnd(),MOVEMENTFLAG_WALK_MODE|MOVEMENTFLAG_ONTRANSPORT);
}

开发者ID:spiritos，项目名称:mangos，代码行数:12，代码来源:WaypointMovementGenerator.cpp

示例9: LoadPath

void FlightPathMovementGenerator::Initialize(Player &player)
{
    // Random handlers used for quests etc. - best would be to add FlightPathMovementGenerator::Initialize to sub-script class (Feanor)
    if( player.m_taxi.GetTaxiDestination() == 158 || player.m_taxi.GetTaxiDestination() == 243 )
        player.SetDisplayId(16587);

    player.getHostileRefManager().setOnlineOfflineState(false);
    player.addUnitState(UNIT_STAT_IN_FLIGHT);
    player.SetFlag(UNIT_FIELD_FLAGS,UNIT_FLAG_DISABLE_MOVE | UNIT_FLAG_TAXI_FLIGHT);
    LoadPath(player);
    Traveller<Player> traveller(player);
    // do not send movement, it was sent already
    i_destinationHolder.SetDestination(traveller, i_path[i_currentNode].x, i_path[i_currentNode].y, i_path[i_currentNode].z, false);

    player.SendMonsterMoveByPath(GetPath(),GetCurrentNode(),GetPathAtMapEnd(), SplineFlags(SPLINEFLAG_WALKMODE|SPLINEFLAG_FLYING));
}

开发者ID:Lirok，项目名称:mangos，代码行数:16，代码来源:WaypointMovementGenerator.cpp

示例10: LoadPath

void PathBehavior::DoStepPostEvents(RuntimeScene & scene)
{
    if(!isPathLoaded)
    {
        LoadPath(scene);
        Reset();
    }
    if(futureSegment != -1)
    {
        EnterSegment(futureSegment);
        futureSegment = -1;
    }
    if(futurePosition != -1)
    {
        timeOnSegment = futurePosition * totalSegmentTime;
        futurePosition = -1;
    }
}

开发者ID:sanyaade-teachings，项目名称:GD，代码行数:18，代码来源:PathBehavior.cpp

示例11: LoadPath

/**
 * Called at each frame before events :
 * Position the object on the path
 */
void PathBehavior::DoStepPreEvents(RuntimeScene & scene)
{
    if(!isPathLoaded)
    {
        LoadPath(scene);
        Reset();
    }

    //  add to the current time along the path
    timeOnSegment += static_cast<double>(scene.GetTimeManager().GetElapsedTime())
        / 1000000.0 * speed;

    //  if I reached the end of this segment, move to a new segment
    if (timeOnSegment >= totalSegmentTime && currentSegment < path.size())
        EnterSegment(currentSegment + 1);

    //Position object on the segment
    sf::Vector2f newPos;
    if ( !path.empty() && currentSegment < path.size()-1 )
        newPos = offset + path[currentSegment] + (path[currentSegment + 1] - path[currentSegment]) * (timeOnSegment / totalSegmentTime);
    else
    {
        if ( stopAtEnd && !path.empty()) newPos = path.back() + offset;
        else if (reverseAtEnd)
        {
            std::reverse(path.begin(), path.end());
            EnterSegment(0);
            if (!path.empty()) newPos = path.front() + offset;
        }
        else
        {
            EnterSegment(0);
            if (!path.empty()) newPos = path.front() + offset;
        }
    }

    object->SetX(newPos.x);
    object->SetY(newPos.y);

    return;
}

开发者ID:mateerladnam，项目名称:GD，代码行数:45，代码来源:PathBehavior.cpp

示例12: TC_LOG_ERROR

void SmartAI::StartPath(bool run/* = false*/, uint32 pathId/* = 0*/, bool repeat/* = false*/, Unit* invoker/* = nullptr*/, uint32 nodeId/* = 1*/)
{
    if (me->IsInCombat()) // no wp movement in combat
    {
        TC_LOG_ERROR("misc", "SmartAI::StartPath: Creature entry %u wanted to start waypoint movement (%u) while in combat, ignoring.", me->GetEntry(), pathId);
        return;
    }

    if (HasEscortState(SMART_ESCORT_ESCORTING))
        StopPath();

    SetRun(run);

    if (pathId)
    {
        if (!LoadPath(pathId))
            return;
    }

    if (_path.nodes.empty())
        return;

    _currentWaypointNode = nodeId;
    _waypointPathEnded = false;

    _repeatWaypointPath = repeat;

    // Do not use AddEscortState, removing everything from previous
    _escortState = SMART_ESCORT_ESCORTING;

    if (invoker && invoker->GetTypeId() == TYPEID_PLAYER)
    {
        _escortNPCFlags = me->GetUInt32Value(UNIT_NPC_FLAGS);
        me->SetFlag(UNIT_NPC_FLAGS, 0);
    }

    GetScript()->ProcessEventsFor(SMART_EVENT_WAYPOINT_START, nullptr, _currentWaypointNode, GetScript()->GetPathId());

    me->GetMotionMaster()->MovePath(_path, _repeatWaypointPath);
}

开发者ID:lasyan3，项目名称:TrinityCore，代码行数:40，代码来源:SmartAI.cpp

示例13: StopPath

void SmartAI::StartPath(bool run, uint32 path, bool repeat, Unit* invoker)
{
    if (me->IsInCombat())// no wp movement in combat
    {
        sLog->outError("SmartAI::StartPath: Creature entry %u wanted to start waypoint movement while in combat, ignoring.", me->GetEntry());
        return;
    }

    if (HasEscortState(SMART_ESCORT_ESCORTING))
        StopPath();

    if (path)
    {
        if (!LoadPath(path))
            return;
    }

    if (!mWayPoints || mWayPoints->empty())
        return;

    if (WayPoint* wp = GetNextWayPoint())
    {
        AddEscortState(SMART_ESCORT_ESCORTING);
        mCanRepeatPath = repeat;
        SetRun(run);

        if (invoker && invoker->GetTypeId() == TYPEID_PLAYER)
        {
            mEscortNPCFlags = me->GetUInt32Value(UNIT_NPC_FLAGS);
            me->SetUInt32Value(UNIT_NPC_FLAGS, 0);
        }

        Movement::PointsArray pathPoints;
        GenerateWayPointArray(&pathPoints);

        me->GetMotionMaster()->MoveSplinePath(&pathPoints);
        GetScript()->ProcessEventsFor(SMART_EVENT_WAYPOINT_START, NULL, wp->id, GetScript()->GetPathId());
    }
}

开发者ID:Matt-One，项目名称:azerothcore-wotlk，代码行数:39，代码来源:SmartAI.cpp

示例14: LoadPath

void FlightPathMovementGenerator::Initialize(Player &player)
{
    player.getHostileRefManager().setOnlineOfflineState(false);
    player.addUnitState(UNIT_STAT_IN_FLIGHT);
    player.SetFlag(UNIT_FIELD_FLAGS, UNIT_FLAG_DISABLE_MOVE | UNIT_FLAG_TAXI_FLIGHT);
    LoadPath(player);
    Traveller<Player> traveller(player);
    // do not send movement, it was sent already
    i_destinationHolder.SetDestination(traveller, i_path[i_currentNode].x, i_path[i_currentNode].y, i_path[i_currentNode].z, false);

    player.SendMonsterMoveByPath(GetPath(), GetCurrentNode(), GetPathAtMapEnd());

    // Storage to preload flightmaster grid at end of flight. For multi-stop flights, this will
    // be reinitialized for each flightmaster at the end of each spline (or stop) in the flight.

    uint32 nodeCount = i_mapIds.size();     // Get the number of nodes in the path. i_path and i_mapIds are the
                                            //  same size when loaded in ObjectMgr::GetTaxiPathNodes, called from LoadPath()

    m_endMapId = i_mapIds[nodeCount -1];    // Get the map ID from the last node
    m_preloadTargetNode = nodeCount - 3;    // 2 nodes before the final node, we pre-load the grid
    m_endGridX = i_path[nodeCount -1].x;    // Get the X position from the last node
    m_endGridY = i_path[nodeCount -1].y;    // Get tye Y position from the last node
}

开发者ID:ShadowCore，项目名称:ShadowCore，代码行数:23，代码来源:WaypointMovementGenerator.cpp

示例15: TC_LOG_ERROR

void SmartAI::StartPath(bool run, uint32 path, bool repeat, Unit* invoker)
{
    if (me->IsInCombat())// no wp movement in combat
    {
        TC_LOG_ERROR("misc", "SmartAI::StartPath: Creature entry %u wanted to start waypoint movement while in combat, ignoring.", me->GetEntry());
        return;
    }

    if (HasEscortState(SMART_ESCORT_ESCORTING))
        StopPath();

    SetRun(run);

    if (path)
        if (!LoadPath(path))
            return;

    if (_path.nodes.empty())
        return;

    mCurrentWPID = 1;
    m_Ended = false;

    // Do not use AddEscortState, removing everything from previous cycle
    mEscortState = SMART_ESCORT_ESCORTING;
    mCanRepeatPath = repeat;

    if (invoker && invoker->GetTypeId() == TYPEID_PLAYER)
    {
        mEscortNPCFlags = me->GetUInt32Value(UNIT_NPC_FLAGS);
        me->SetFlag(UNIT_NPC_FLAGS, 0);
    }

    GetScript()->ProcessEventsFor(SMART_EVENT_WAYPOINT_START, nullptr, mCurrentWPID, GetScript()->GetPathId());

    me->GetMotionMaster()->MovePath(_path, mCanRepeatPath);
}

开发者ID:Carbenium，项目名称:TrinityCore，代码行数:37，代码来源:SmartAI.cpp

示例16: LoadPath

bool CConfigIni::LoadSystem(const CString& systemName, CConfigIni::structSystem& system)
{
	//路径
	LoadPath(systemName, l_szIniItem_PathData, system.m_szPathData);
	LoadPath(systemName, l_szIniItem_PathTask, system.m_szPathTask);
	LoadPath(systemName, l_szIniItem_PathSample, system.m_szPathSample);
	LoadPath(systemName, l_szIniItem_PathCompound, system.m_szPathCompound);
	LoadPath(systemName, l_szIniItem_PathMethod, system.m_szPathMethod);
	LoadPath(systemName, l_szIniItem_PathCrystalReport, system.m_szPathCrystalReport);
	LoadPath(systemName, l_szIniItem_PathLog, system.m_szPathLog);
	//参数
	LoadString(systemName, l_szIniItem_DefaultMethod, system.m_szDefaultMethod);
	LoadString(systemName, l_szIniItem_Inject, system.m_szInject);
	//	LoadString(systemName, _T("SCParam"), system.m_szSCParam);
	//	LoadString(systemName, _T("SysSettings"), system.m_szSysSettings);
	LoadString(systemName, l_szIniItem_Instrument, system.m_szInstrument);
	//硬件
	LoadInt(systemName, l_szIniItem_RGACOM, system.m_iRGACOM);
	LoadInt(systemName, l_szIniItem_ValveCOM, system.m_iValveCOM);
	LoadInt(systemName, l_szIniItem_PumpCOM, system.m_iPumpCOM);

	LoadInt(systemName, l_szIniItem_NextSampleID, system.m_iNextSampleID);

	LoadString(systemName, l_szIniItem_WindowName, system.m_szWindowName);
	LoadString(systemName, l_szIniItem_ProgramName, system.m_szProgramName);
	LoadString(systemName, l_szIniItem_MessageName, system.m_szMessageName);
	LoadString(systemName, l_szIniItem_SignalName, system.m_szSignalName);
	LoadString(systemName, l_szIniItem_XSLFolder, system.m_szXSLFolder);
	if(system.m_szXSLFolder.GetLength())
	{
		TCHAR c = system.m_szXSLFolder.GetAt(system.m_szXSLFolder.GetLength() - 1);
		if(c == '/' || c == '\\') system.m_szXSLFolder.Delete(system.m_szXSLFolder.GetLength() - 1);	
	}
	LoadString(systemName, l_szIniItem_LastTask, system.m_szLastTask);

	LoadInt(systemName, l_szIniItem_ShowAutoSampler, system.m_bShowAutoSampler);

	return true;
}

开发者ID:Wanghuaichen，项目名称:SignalProcess，代码行数:39，代码来源:Base_AnalysisTemplate.cpp

示例17: main

void main(int argc, char **argv)
{
  // init glut

  glutInit(&argc, argv);
  glutInitDisplayMode(GLUT_DOUBLE | GLUT_RGB | GLUT_DEPTH | GLUT_MULTISAMPLE);

  // create the window

  glutCreateWindow("PQP Demo - Falling");

  // set OpenGL graphics state -- material props, perspective, etc.

  init_viewer_window();

  // set the callbacks

  glutDisplayFunc(cb_display);
  glutMouseFunc(cb_mouse);
  glutMotionFunc(cb_motion);  
  glutKeyboardFunc(cb_keyboard);
  glutIdleFunc(cb_idle);

  // create models

  FILE *fp;
  int ntris, i;
  double a,b,c;
  PQP_REAL p1[3],p2[3],p3[3];

  // model 1

  torus1_drawn = new Model("torus1.tris");

  torus1_tested = new PQP_Model();

  fp = fopen("torus1.tris","r");
  fscanf(fp,"%d",&ntris);

  torus1_tested->BeginModel();
  for (i = 0; i < ntris; i++)
  {
    fscanf(fp,"%lf %lf %lf",&a,&b,&c);
    p1[0] = (PQP_REAL)a;
    p1[1] = (PQP_REAL)b;
    p1[2] = (PQP_REAL)c;
    fscanf(fp,"%lf %lf %lf",&a,&b,&c);
    p2[0] = (PQP_REAL)a;
    p2[1] = (PQP_REAL)b;
    p2[2] = (PQP_REAL)c;
    fscanf(fp,"%lf %lf %lf",&a,&b,&c);
    p3[0] = (PQP_REAL)a;
    p3[1] = (PQP_REAL)b;
    p3[2] = (PQP_REAL)c;
    torus1_tested->AddTri(p1,p2,p3,i);
  }
  torus1_tested->EndModel();  

  fclose(fp);

  // model 2

  torus2_drawn = new Model("torus2.tris");

  torus2_tested = new PQP_Model();

  fp = fopen("torus2.tris","r");
  fscanf(fp,"%d",&ntris);

  torus2_tested->BeginModel();
  for (i = 0; i < ntris; i++)
  {
    fscanf(fp,"%lf %lf %lf",&a,&b,&c);
    p1[0] = (PQP_REAL)a;
    p1[1] = (PQP_REAL)b;
    p1[2] = (PQP_REAL)c;
    fscanf(fp,"%lf %lf %lf",&a,&b,&c);
    p2[0] = (PQP_REAL)a;
    p2[1] = (PQP_REAL)b;
    p2[2] = (PQP_REAL)c;
    fscanf(fp,"%lf %lf %lf",&a,&b,&c);
    p3[0] = (PQP_REAL)a;
    p3[1] = (PQP_REAL)b;
    p3[2] = (PQP_REAL)c;
    torus2_tested->AddTri(p1,p2,p3,i);
  }
  torus2_tested->EndModel();  

  fclose(fp);

  // load paths

  LoadPath(R1,T1,"torus1.path");
  LoadPath(R2,T2,"torus2.path");

  // print instructions

  LOG4CXX_INFO(KrisLibrary::logger(),"PQP Demo - Falling:\n"
         "Press:\n"
         "0 - no proximity query, just animation\n"
//.........这里部分代码省略.........

开发者ID:krishauser，项目名称:KrisLibrary，代码行数:101，代码来源:main.cpp

示例18: LoadPath

void WaypointMovementGenerator<Creature>::DoInitialize(Creature* creature)
{
    LoadPath(creature);
    creature->AddUnitState(UNIT_STATE_ROAMING|UNIT_STATE_ROAMING_MOVE);
}

开发者ID:Helias，项目名称:azerothcore-wotlk，代码行数:5，代码来源:WaypointMovementGenerator.cpp

示例19: LoadPath

void WaypointMovementGenerator<Creature>::DoInitialize(Creature* creature)
{
    LoadPath(creature);
}

开发者ID:090809，项目名称:TrinityCore，代码行数:4，代码来源:WaypointMovementGenerator.cpp

示例20: ReadPortType

void
Profile::GetDeviceConfig(const ProfileMap &map, unsigned n,
                         DeviceConfig &config)
{
  char buffer[64];

  bool have_port_type = ReadPortType(map, n, config.port_type);

  MakeDeviceSettingName(buffer, "Port", n, "BluetoothMAC");
  map.Get(buffer, config.bluetooth_mac);

  MakeDeviceSettingName(buffer, "Port", n, "IOIOUartID");
  map.Get(buffer, config.ioio_uart_id);

  MakeDeviceSettingName(buffer, "Port", n, "IPAddress");
  if (!map.Get(buffer, config.ip_address))
    config.ip_address.clear();

  MakeDeviceSettingName(buffer, "Port", n, "TCPPort");
  if (!map.Get(buffer, config.tcp_port))
    config.tcp_port = 4353;

  config.path.clear();
  if ((!have_port_type ||
       config.port_type == DeviceConfig::PortType::SERIAL) &&
      !LoadPath(map, config, n) && LoadPortIndex(map, config, n))
    config.port_type = DeviceConfig::PortType::SERIAL;

  MakeDeviceSettingName(buffer, "Port", n, "BaudRate");
  if (!map.Get(buffer, config.baud_rate)) {
    /* XCSoar before 6.2 used to store a "speed index", not the real
       baud rate - try to import the old settings */

    static constexpr unsigned speed_index_table[] = {
      1200,
      2400,
      4800,
      9600,
      19200,
      38400,
      57600,
      115200
    };

    MakeDeviceSettingName(buffer, "Speed", n, "Index");
    unsigned speed_index;
    if (map.Get(buffer, speed_index) &&
        speed_index < ARRAY_SIZE(speed_index_table))
      config.baud_rate = speed_index_table[speed_index];
  }

  MakeDeviceSettingName(buffer, "Port", n, "BulkBaudRate");
  if (!map.Get(buffer, config.bulk_baud_rate))
    config.bulk_baud_rate = 0;

  strcpy(buffer, "DeviceA");
  buffer[strlen(buffer) - 1] += n;
  map.Get(buffer, config.driver_name);

  MakeDeviceSettingName(buffer, "Port", n, "Enabled");
  map.Get(buffer, config.enabled);

  MakeDeviceSettingName(buffer, "Port", n, "SyncFromDevice");
  map.Get(buffer, config.sync_from_device);

  MakeDeviceSettingName(buffer, "Port", n, "SyncToDevice");
  map.Get(buffer, config.sync_to_device);

  MakeDeviceSettingName(buffer, "Port", n, "K6Bt");
  map.Get(buffer, config.k6bt);

  MakeDeviceSettingName(buffer, "Port", n, "I2C_Bus");
  map.Get(buffer, config.i2c_bus);

  MakeDeviceSettingName(buffer, "Port", n, "I2C_Addr");
  map.Get(buffer, config.i2c_addr);

  MakeDeviceSettingName(buffer, "Port", n, "PressureUse");
  map.GetEnum(buffer, config.press_use);

  MakeDeviceSettingName(buffer, "Port", n, "SensorOffset");
  map.Get(buffer, config.sensor_offset);

  MakeDeviceSettingName(buffer, "Port", n, "SensorFactor");
  map.Get(buffer, config.sensor_factor);

  MakeDeviceSettingName(buffer, "Port", n, "UseSecondDevice");
  map.Get(buffer, config.use_second_device);

  MakeDeviceSettingName(buffer, "Port", n, "SecondDevice");
  map.Get(buffer, config.driver2_name);
}

开发者ID:kwtskran，项目名称:XCSoar，代码行数:92，代码来源:DeviceConfig.cpp

注：本文中的LoadPath函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ LoadResStr函数代码示例发布时间：2022-05-30

C++ LoadPatchMD5函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18229|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9664|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8174|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8546|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8452|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9377|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8422|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8407|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7393|2022-11-06

客服电话

电子邮件

C++ LoadPath函数代码示例

示例1: LoadPath

示例2: StopPath

示例3: LoadPath

示例4: atunnel_InitTunnel

示例5: LoadPath

示例6: LoadPath

示例7: LoadPath

示例8: LoadPath

示例9: LoadPath

示例10: LoadPath

示例11: LoadPath

示例12: TC_LOG_ERROR

示例13: StopPath

示例14: LoadPath

示例15: TC_LOG_ERROR

示例16: LoadPath

示例17: main

示例18: LoadPath

示例19: LoadPath

示例20: ReadPortType

请发表评论

全部评论

上一篇：

下一篇：

hackl/tikz-network: A tool to visualize

krishnaik06/Machine-Learning-in-90-days

joaomh/curso-de-matlab

美元符号为什么是“$”

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053