本文整理汇总了C++中MACB_BIT函数的典型用法代码示例。如果您正苦于以下问题：C++ MACB_BIT函数的具体用法？C++ MACB_BIT怎么用？C++ MACB_BIT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了MACB_BIT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: macb_mdio_read
static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
{
unsigned long netctl;
unsigned long netstat;
unsigned long frame;
netctl = macb_readl(macb, NCR);
netctl |= MACB_BIT(MPE);
macb_writel(macb, NCR, netctl);
frame = (MACB_BF(SOF, 1)
| MACB_BF(RW, 2)
| MACB_BF(PHYA, macb->phy_addr)
| MACB_BF(REGA, reg)
| MACB_BF(CODE, 2));
macb_writel(macb, MAN, frame);
do {
netstat = macb_readl(macb, NSR);
} while (!(netstat & MACB_BIT(IDLE)));
frame = macb_readl(macb, MAN);
netctl = macb_readl(macb, NCR);
netctl &= ~MACB_BIT(MPE);
macb_writel(macb, NCR, netctl);
return MACB_BFEXT(DATA, frame);
}
开发者ID:RobertCNelson，项目名称:u-boot-boards，代码行数:29，代码来源:macb.c
示例2: macb_phy_write
static int macb_phy_write(struct mii_device *mdev, int addr, int reg, int value)
{
struct eth_device *edev = mdev->edev;
struct macb_device *macb = edev->priv;
unsigned long netctl;
unsigned long netstat;
unsigned long frame;
debug("%s\n", __func__);
netctl = readl(macb->regs + MACB_NCR);
netctl |= MACB_BIT(MPE);
writel(netctl, macb->regs + MACB_NCR);
frame = (MACB_BF(SOF, 1)
| MACB_BF(RW, 1)
| MACB_BF(PHYA, addr)
| MACB_BF(REGA, reg)
| MACB_BF(CODE, 2)
| MACB_BF(DATA, value));
writel(frame, macb->regs + MACB_MAN);
do {
netstat = readl(macb->regs + MACB_NSR);
} while (!(netstat & MACB_BIT(IDLE)));
netctl = readl(macb->regs + MACB_NCR);
netctl &= ~MACB_BIT(MPE);
writel(netctl, macb->regs + MACB_NCR);
return 0;
}
开发者ID:cpdesign，项目名称:barebox，代码行数:32，代码来源:macb.c
示例3: macb_smi_write
static void macb_smi_write(struct macb_device *macb, u16 phy, u8 reg, u16 value)
{
unsigned long netctl;
unsigned long netstat;
unsigned long frame;
netctl = macb_readl(macb, NCR);
netctl |= MACB_BIT(MPE);
macb_writel(macb, NCR, netctl);
frame = (MACB_BF(SOF, 1)
| MACB_BF(RW, 1)
| MACB_BF(PHYA, phy)
| MACB_BF(REGA, reg)
| MACB_BF(CODE, 2)
| MACB_BF(DATA, value));
macb_writel(macb, MAN, frame);
do {
netstat = macb_readl(macb, NSR);
} while (!(netstat & MACB_BIT(IDLE)));
netctl = macb_readl(macb, NCR);
netctl &= ~MACB_BIT(MPE);
macb_writel(macb, NCR, netctl);
}
开发者ID:feir777，项目名称:wr1004sjl，代码行数:26，代码来源:macb.c
示例4: at91ether_close
/* Close the interface */
static int at91ether_close(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
u32 ctl;
/* Disable Receiver and Transmitter */
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl & ~(MACB_BIT(TE) | MACB_BIT(RE)));
/* Disable MAC interrupts */
macb_writel(lp, IDR, MACB_BIT(RCOMP) |
MACB_BIT(RXUBR) |
MACB_BIT(ISR_TUND) |
MACB_BIT(ISR_RLE) |
MACB_BIT(TCOMP) |
MACB_BIT(ISR_ROVR) |
MACB_BIT(HRESP));
netif_stop_queue(dev);
dma_free_coherent(&lp->pdev->dev,
MAX_RX_DESCR * sizeof(struct macb_dma_desc),
lp->rx_ring, lp->rx_ring_dma);
lp->rx_ring = NULL;
dma_free_coherent(&lp->pdev->dev,
MAX_RX_DESCR * MAX_RBUFF_SZ,
lp->rx_buffers, lp->rx_buffers_dma);
lp->rx_buffers = NULL;
return 0;
}
开发者ID:7799，项目名称:linux，代码行数:33，代码来源:at91_ether.c
示例5: macb_phy_init
static int macb_phy_init(struct macb_device *macb)
{
struct eth_device *netdev = &macb->netdev;
u32 ncfgr;
u16 phy_id, status, adv, lpa;
int media, speed, duplex;
int i;
/* Check if the PHY is up to snuff... */
phy_id = macb_mdio_read(macb, MII_PHYSID1);
if (phy_id == 0xffff) {
printf("%s: No PHY present\n", netdev->name);
return 0;
}
status = macb_mdio_read(macb, MII_BMSR);
if (!(status & BMSR_LSTATUS)) {
/* Try to re-negotiate if we don't have link already. */
macb_phy_reset(macb);
for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
status = macb_mdio_read(macb, MII_BMSR);
if (status & BMSR_LSTATUS)
break;
udelay(100);
}
}
if (!(status & BMSR_LSTATUS)) {
printf("%s: link down (status: 0x%04x)\n",
netdev->name, status);
return 0;
} else {
adv = macb_mdio_read(macb, MII_ADVERTISE);
lpa = macb_mdio_read(macb, MII_LPA);
media = mii_nway_result(lpa & adv);
speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
? 1 : 0);
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
netdev->name,
speed ? "100" : "10",
duplex ? "full" : "half",
lpa);
ncfgr = macb_readl(macb, NCFGR);
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
if (speed)
ncfgr |= MACB_BIT(SPD);
if (duplex)
ncfgr |= MACB_BIT(FD);
macb_writel(macb, NCFGR, ncfgr);
return 1;
}
}
开发者ID:kipr，项目名称:u-boot-2009.07-silvermoon，代码行数:55，代码来源:macb.c
示例6: macb_send
static int macb_send(struct eth_device *netdev, void *packet, int length)
{
struct macb_device *macb = to_macb(netdev);
unsigned long paddr, ctrl;
unsigned int tx_head = macb->tx_head;
int i;
paddr = dma_map_single(packet, length, DMA_TO_DEVICE);
ctrl = length & TXBUF_FRMLEN_MASK;
ctrl |= TXBUF_FRAME_END;
if (tx_head == (MACB_TX_RING_SIZE - 1)) {
ctrl |= TXBUF_WRAP;
macb->tx_head = 0;
} else {
macb->tx_head++;
}
macb->tx_ring[tx_head].ctrl = ctrl;
macb->tx_ring[tx_head].addr = paddr;
barrier();
macb_flush_ring_desc(macb, TX);
/* Do we need check paddr and length is dcache line aligned? */
flush_dcache_range(paddr, paddr + length);
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));
/*
* I guess this is necessary because the networking core may
* re-use the transmit buffer as soon as we return...
*/
for (i = 0; i <= MACB_TX_TIMEOUT; i++) {
barrier();
macb_invalidate_ring_desc(macb, TX);
ctrl = macb->tx_ring[tx_head].ctrl;
if (ctrl & TXBUF_USED)
break;
udelay(1);
}
dma_unmap_single(packet, length, paddr);
if (i <= MACB_TX_TIMEOUT) {
if (ctrl & TXBUF_UNDERRUN)
printf("%s: TX underrun\n", netdev->name);
if (ctrl & TXBUF_EXHAUSTED)
printf("%s: TX buffers exhausted in mid frame\n",
netdev->name);
} else {
printf("%s: TX timeout\n", netdev->name);
}
/* No one cares anyway */
return 0;
}
开发者ID:chendian，项目名称:uboot，代码行数:54，代码来源:macb.c
示例7: at91ether_open
/* Open the ethernet interface */
static int at91ether_open(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
u32 ctl;
int ret;
/* Clear internal statistics */
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl | MACB_BIT(CLRSTAT));
macb_set_hwaddr(lp);
ret = at91ether_start(dev);
if (ret)
return ret;
/* Enable MAC interrupts */
macb_writel(lp, IER, MACB_BIT(RCOMP) |
MACB_BIT(RXUBR) |
MACB_BIT(ISR_TUND) |
MACB_BIT(ISR_RLE) |
MACB_BIT(TCOMP) |
MACB_BIT(ISR_ROVR) |
MACB_BIT(HRESP));
/* schedule a link state check */
phy_start(lp->phy_dev);
netif_start_queue(dev);
return 0;
}
开发者ID:7799，项目名称:linux，代码行数:33，代码来源:at91_ether.c
示例8: at91ether_start
/* Initialize and start the Receiver and Transmit subsystems */
static int at91ether_start(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
dma_addr_t addr;
u32 ctl;
int i;
lp->rx_ring = dma_alloc_coherent(&lp->pdev->dev,
MAX_RX_DESCR * sizeof(struct macb_dma_desc),
&lp->rx_ring_dma, GFP_KERNEL);
if (!lp->rx_ring) {
netdev_err(dev, "unable to alloc rx ring DMA buffer\n");
return -ENOMEM;
}
lp->rx_buffers = dma_alloc_coherent(&lp->pdev->dev,
MAX_RX_DESCR * MAX_RBUFF_SZ,
&lp->rx_buffers_dma, GFP_KERNEL);
if (!lp->rx_buffers) {
netdev_err(dev, "unable to alloc rx data DMA buffer\n");
dma_free_coherent(&lp->pdev->dev,
MAX_RX_DESCR * sizeof(struct macb_dma_desc),
lp->rx_ring, lp->rx_ring_dma);
lp->rx_ring = NULL;
return -ENOMEM;
}
addr = lp->rx_buffers_dma;
for (i = 0; i < MAX_RX_DESCR; i++) {
lp->rx_ring[i].addr = addr;
lp->rx_ring[i].ctrl = 0;
addr += MAX_RBUFF_SZ;
}
/* Set the Wrap bit on the last descriptor */
lp->rx_ring[MAX_RX_DESCR - 1].addr |= MACB_BIT(RX_WRAP);
/* Reset buffer index */
lp->rx_tail = 0;
/* Program address of descriptor list in Rx Buffer Queue register */
macb_writel(lp, RBQP, lp->rx_ring_dma);
/* Enable Receive and Transmit */
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl | MACB_BIT(RE) | MACB_BIT(TE));
return 0;
}
开发者ID:AdrianHuang，项目名称:linux-3.8.13，代码行数:51，代码来源:at91_ether.c
示例9: macb_phy_read
static int macb_phy_read(struct mii_device *mdev, int addr, int reg)
{
struct eth_device *edev = mdev->edev;
struct macb_device *macb = edev->priv;
unsigned long netctl;
unsigned long netstat;
unsigned long frame;
int iflag;
int value;
uint64_t start;
debug("%s\n", __func__);
iflag = disable_interrupts();
netctl = readl(macb->regs + MACB_NCR);
netctl |= MACB_BIT(MPE);
writel(netctl, macb->regs + MACB_NCR);
if (iflag)
enable_interrupts();
frame = (MACB_BF(SOF, 1)
| MACB_BF(RW, 2)
| MACB_BF(PHYA, addr)
| MACB_BF(REGA, reg)
| MACB_BF(CODE, 2));
writel(frame, macb->regs + MACB_MAN);
start = get_time_ns();
do {
netstat = readl(macb->regs + MACB_NSR);
if (is_timeout(start, SECOND)) {
printf("phy read timed out\n");
return -1;
}
} while (!(netstat & MACB_BIT(IDLE)));
frame = readl(macb->regs + MACB_MAN);
value = MACB_BFEXT(DATA, frame);
iflag = disable_interrupts();
netctl = readl(macb->regs + MACB_NCR);
netctl &= ~MACB_BIT(MPE);
writel(netctl, macb->regs + MACB_NCR);
if (iflag)
enable_interrupts();
return value;
}
开发者ID:ray650128，项目名称:barebox-sh4-nextvod，代码行数:49，代码来源:macb.c
示例10: at91ether_start_xmit
/* Transmit packet */
static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
if (macb_readl(lp, TSR) & MACB_BIT(RM9200_BNQ)) {
netif_stop_queue(dev);
/* Store packet information (to free when Tx completed) */
lp->skb = skb;
lp->skb_length = skb->len;
lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len,
DMA_TO_DEVICE);
/* Set address of the data in the Transmit Address register */
macb_writel(lp, TAR, lp->skb_physaddr);
/* Set length of the packet in the Transmit Control register */
macb_writel(lp, TCR, skb->len);
} else {
netdev_err(dev, "%s called, but device is busy!\n", __func__);
return NETDEV_TX_BUSY;
}
return NETDEV_TX_OK;
}
开发者ID:7799，项目名称:linux，代码行数:26，代码来源:at91_ether.c
示例11: _macb_halt
static void _macb_halt(struct macb_device *macb)
{
u32 ncr, tsr;
/* Halt the controller and wait for any ongoing transmission to end. */
ncr = macb_readl(macb, NCR);
ncr |= MACB_BIT(THALT);
macb_writel(macb, NCR, ncr);
do {
tsr = macb_readl(macb, TSR);
} while (tsr & MACB_BIT(TGO));
/* Disable TX and RX, and clear statistics */
macb_writel(macb, NCR, MACB_BIT(CLRSTAT));
}
开发者ID:RobertCNelson，项目名称:u-boot-boards，代码行数:16，代码来源:macb.c
示例12: macb_init
static int macb_init(struct eth_device *edev)
{
struct macb_device *macb = edev->priv;
unsigned long paddr, val = 0;
int i;
debug("%s\n", __func__);
/*
* macb_halt should have been called at some point before now,
* so we'll assume the controller is idle.
*/
/* initialize DMA descriptors */
paddr = (ulong)macb->rx_buffer;
for (i = 0; i < CFG_MACB_RX_RING_SIZE; i++) {
if (i == (CFG_MACB_RX_RING_SIZE - 1))
paddr |= RXADDR_WRAP;
macb->rx_ring[i].addr = paddr;
macb->rx_ring[i].ctrl = 0;
paddr += 128;
}
macb->tx_ring[0].addr = 0;
macb->tx_ring[0].ctrl = TXBUF_USED | TXBUF_WRAP;
macb->rx_tail = macb->tx_tail = 0;
writel((ulong)macb->rx_ring, macb->regs + MACB_RBQP);
writel((ulong)macb->tx_ring, macb->regs + MACB_TBQP);
if (macb->flags & AT91SAM_ETHER_RMII)
val |= MACB_BIT(RMII);
else
val &= ~MACB_BIT(RMII);
#if defined(CONFIG_ARCH_AT91)
val |= MACB_BIT(CLKEN);
#endif
writel(val, macb->regs + MACB_USRIO);
/* Enable TX and RX */
writel(MACB_BIT(TE) | MACB_BIT(RE), macb->regs + MACB_NCR);
return 0;
}
开发者ID:ray650128，项目名称:barebox-sh4-nextvod，代码行数:46，代码来源:macb.c
示例13: macb_halt
static void macb_halt(struct eth_device *edev)
{
struct macb_device *macb = edev->priv;
u32 ncr, tsr;
/* Halt the controller and wait for any ongoing transmission to end. */
ncr = readl(macb->regs + MACB_NCR);
ncr |= MACB_BIT(THALT);
writel(ncr, macb->regs + MACB_NCR);
do {
tsr = readl(macb->regs + MACB_TSR);
} while (tsr & MACB_BIT(TGO));
/* Disable TX and RX, and clear statistics */
writel(MACB_BIT(CLRSTAT), macb->regs + MACB_NCR);
}
开发者ID:ray650128，项目名称:barebox-sh4-nextvod，代码行数:17，代码来源:macb.c
示例14: macb_open
static int macb_open(struct eth_device *edev)
{
struct macb_device *macb = edev->priv;
int duplex = 1, speed = 1;
u32 ncfgr;
debug("%s\n", __func__);
miidev_wait_aneg(&macb->miidev);
miidev_print_status(&macb->miidev);
ncfgr = readl(macb->regs + MACB_NCFGR);
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
if (speed)
ncfgr |= MACB_BIT(SPD);
if (duplex)
ncfgr |= MACB_BIT(FD);
writel(ncfgr, macb->regs + MACB_NCFGR);
return 0;
}
开发者ID:ray650128，项目名称:barebox-sh4-nextvod，代码行数:21，代码来源:macb.c
示例15: at91ether_rx
/* Extract received frame from buffer descriptors and sent to upper layers.
* (Called from interrupt context)
*/
static void at91ether_rx(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
unsigned char *p_recv;
struct sk_buff *skb;
unsigned int pktlen;
while (lp->rx_ring[lp->rx_tail].addr & MACB_BIT(RX_USED)) {
p_recv = lp->rx_buffers + lp->rx_tail * MAX_RBUFF_SZ;
pktlen = MACB_BF(RX_FRMLEN, lp->rx_ring[lp->rx_tail].ctrl);
skb = netdev_alloc_skb(dev, pktlen + 2);
if (skb) {
skb_reserve(skb, 2);
memcpy(skb_put(skb, pktlen), p_recv, pktlen);
skb->protocol = eth_type_trans(skb, dev);
lp->stats.rx_packets++;
lp->stats.rx_bytes += pktlen;
netif_rx(skb);
} else {
lp->stats.rx_dropped++;
netdev_notice(dev, "Memory squeeze, dropping packet.\n");
}
if (lp->rx_ring[lp->rx_tail].ctrl & MACB_BIT(RX_MHASH_MATCH))
lp->stats.multicast++;
/* reset ownership bit */
lp->rx_ring[lp->rx_tail].addr &= ~MACB_BIT(RX_USED);
/* wrap after last buffer */
if (lp->rx_tail == MAX_RX_DESCR - 1)
lp->rx_tail = 0;
else
lp->rx_tail++;
}
}
开发者ID:AdrianHuang，项目名称:linux-3.8.13，代码行数:40，代码来源:at91_ether.c
示例16: macb_send
static int macb_send(struct eth_device *edev, void *packet,
int length)
{
struct macb_device *macb = edev->priv;
unsigned long ctrl;
debug("%s\n", __func__);
ctrl = length & TXBUF_FRMLEN_MASK;
ctrl |= TXBUF_FRAME_END | TXBUF_WRAP;
macb->tx_ring[0].ctrl = ctrl;
macb->tx_ring[0].addr = (ulong)packet;
barrier();
writel(MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART), macb->regs + MACB_NCR);
if (ctrl & TXBUF_UNDERRUN)
printf("TX underrun\n");
if (ctrl & TXBUF_EXHAUSTED)
printf("TX buffers exhausted in mid frame\n");
/* No one cares anyway */
return 0;
}
开发者ID:ray650128，项目名称:barebox-sh4-nextvod，代码行数:24，代码来源:macb.c
示例17: at91ether_interrupt
/* MAC interrupt handler */
static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct macb *lp = netdev_priv(dev);
u32 intstatus, ctl;
/* MAC Interrupt Status register indicates what interrupts are pending.
* It is automatically cleared once read.
*/
intstatus = macb_readl(lp, ISR);
/* Receive complete */
if (intstatus & MACB_BIT(RCOMP))
at91ether_rx(dev);
/* Transmit complete */
if (intstatus & MACB_BIT(TCOMP)) {
/* The TCOM bit is set even if the transmission failed */
if (intstatus & (MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE)))
lp->stats.tx_errors++;
if (lp->skb) {
dev_kfree_skb_irq(lp->skb);
lp->skb = NULL;
dma_unmap_single(NULL, lp->skb_physaddr, lp->skb_length, DMA_TO_DEVICE);
lp->stats.tx_packets++;
lp->stats.tx_bytes += lp->skb_length;
}
netif_wake_queue(dev);
}
/* Work-around for EMAC Errata section 41.3.1 */
if (intstatus & MACB_BIT(RXUBR)) {
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl & ~MACB_BIT(RE));
macb_writel(lp, NCR, ctl | MACB_BIT(RE));
}
if (intstatus & MACB_BIT(ISR_ROVR))
netdev_err(dev, "ROVR error\n");
return IRQ_HANDLED;
}
开发者ID:7799，项目名称:linux，代码行数:44，代码来源:at91_ether.c
示例18: at91ether_probe
/* Detect MAC & PHY and perform ethernet interface initialization */
static int __init at91ether_probe(struct platform_device *pdev)
{
struct macb_platform_data *board_data = dev_get_platdata(&pdev->dev);
struct resource *regs;
struct net_device *dev;
struct phy_device *phydev;
struct macb *lp;
int res;
u32 reg;
const char *mac;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs)
return -ENOENT;
dev = alloc_etherdev(sizeof(struct macb));
if (!dev)
return -ENOMEM;
lp = netdev_priv(dev);
lp->pdev = pdev;
lp->dev = dev;
spin_lock_init(&lp->lock);
/* physical base address */
dev->base_addr = regs->start;
lp->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
if (!lp->regs) {
res = -ENOMEM;
goto err_free_dev;
}
/* Clock */
lp->pclk = devm_clk_get(&pdev->dev, "ether_clk");
if (IS_ERR(lp->pclk)) {
res = PTR_ERR(lp->pclk);
goto err_free_dev;
}
clk_enable(lp->pclk);
lp->hclk = ERR_PTR(-ENOENT);
lp->tx_clk = ERR_PTR(-ENOENT);
/* Install the interrupt handler */
dev->irq = platform_get_irq(pdev, 0);
res = devm_request_irq(&pdev->dev, dev->irq, at91ether_interrupt, 0, dev->name, dev);
if (res)
goto err_disable_clock;
ether_setup(dev);
dev->netdev_ops = &at91ether_netdev_ops;
dev->ethtool_ops = &macb_ethtool_ops;
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
mac = of_get_mac_address(pdev->dev.of_node);
if (mac)
memcpy(lp->dev->dev_addr, mac, ETH_ALEN);
else
macb_get_hwaddr(lp);
res = of_get_phy_mode(pdev->dev.of_node);
if (res < 0) {
if (board_data && board_data->is_rmii)
lp->phy_interface = PHY_INTERFACE_MODE_RMII;
else
lp->phy_interface = PHY_INTERFACE_MODE_MII;
} else {
lp->phy_interface = res;
}
macb_writel(lp, NCR, 0);
reg = MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG);
if (lp->phy_interface == PHY_INTERFACE_MODE_RMII)
reg |= MACB_BIT(RM9200_RMII);
macb_writel(lp, NCFGR, reg);
/* Register the network interface */
res = register_netdev(dev);
if (res)
goto err_disable_clock;
res = macb_mii_init(lp);
if (res)
goto err_out_unregister_netdev;
/* will be enabled in open() */
netif_carrier_off(dev);
phydev = lp->phy_dev;
netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
phydev->drv->name, dev_name(&phydev->dev),
phydev->irq);
/* Display ethernet banner */
netdev_info(dev, "AT91 ethernet at 0x%08lx int=%d (%pM)\n",
dev->base_addr, dev->irq, dev->dev_addr);
//.........这里部分代码省略.........
开发者ID:7799，项目名称:linux，代码行数:101，代码来源:at91_ether.c
示例19: _macb_init
static int _macb_init(struct macb_device *macb, const char *name)
#endif
{
#ifdef CONFIG_DM_ETH
struct macb_device *macb = dev_get_priv(dev);
#endif
unsigned long paddr;
int i;
/*
* macb_halt should have been called at some point before now,
* so we'll assume the controller is idle.
*/
/* initialize DMA descriptors */
paddr = macb->rx_buffer_dma;
for (i = 0; i < MACB_RX_RING_SIZE; i++) {
if (i == (MACB_RX_RING_SIZE - 1))
paddr |= RXADDR_WRAP;
macb->rx_ring[i].addr = paddr;
macb->rx_ring[i].ctrl = 0;
paddr += 128;
}
macb_flush_ring_desc(macb, RX);
macb_flush_rx_buffer(macb);
for (i = 0; i < MACB_TX_RING_SIZE; i++) {
macb->tx_ring[i].addr = 0;
if (i == (MACB_TX_RING_SIZE - 1))
macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
else
macb->tx_ring[i].ctrl = TXBUF_USED;
}
macb_flush_ring_desc(macb, TX);
macb->rx_tail = 0;
macb->tx_head = 0;
macb->tx_tail = 0;
macb->next_rx_tail = 0;
macb_writel(macb, RBQP, macb->rx_ring_dma);
macb_writel(macb, TBQP, macb->tx_ring_dma);
if (macb_is_gem(macb)) {
/* Check the multi queue and initialize the queue for tx */
gmac_init_multi_queues(macb);
/*
* When the GMAC IP with GE feature, this bit is used to
* select interface between RGMII and GMII.
* When the GMAC IP without GE feature, this bit is used
* to select interface between RMII and MII.
*/
#ifdef CONFIG_DM_ETH
if ((macb->phy_interface == PHY_INTERFACE_MODE_RMII) ||
(macb->phy_interface == PHY_INTERFACE_MODE_RGMII))
gem_writel(macb, UR, GEM_BIT(RGMII));
else
gem_writel(macb, UR, 0);
#else
#if defined(CONFIG_RGMII) || defined(CONFIG_RMII)
gem_writel(macb, UR, GEM_BIT(RGMII));
#else
gem_writel(macb, UR, 0);
#endif
#endif
} else {
/* choose RMII or MII mode. This depends on the board */
#ifdef CONFIG_DM_ETH
#ifdef CONFIG_AT91FAMILY
if (macb->phy_interface == PHY_INTERFACE_MODE_RMII) {
macb_writel(macb, USRIO,
MACB_BIT(RMII) | MACB_BIT(CLKEN));
} else {
macb_writel(macb, USRIO, MACB_BIT(CLKEN));
}
#else
if (macb->phy_interface == PHY_INTERFACE_MODE_RMII)
macb_writel(macb, USRIO, 0);
else
macb_writel(macb, USRIO, MACB_BIT(MII));
#endif
#else
#ifdef CONFIG_RMII
#ifdef CONFIG_AT91FAMILY
macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, 0);
#endif
#else
#ifdef CONFIG_AT91FAMILY
macb_writel(macb, USRIO, MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, MACB_BIT(MII));
#endif
#endif /* CONFIG_RMII */
#endif
}
#ifdef CONFIG_DM_ETH
//.........这里部分代码省略.........
开发者ID:RobertCNelson，项目名称:u-boot-boards，代码行数:101，代码来源:macb.c
示例20: macb_phy_init
static int macb_phy_init(struct macb_device *macb, const char *name)
#endif
{
#ifdef CONFIG_DM_ETH
struct macb_device *macb = dev_get_priv(dev);
#endif
u32 ncfgr;
u16 phy_id, status, adv, lpa;
int media, speed, duplex;
int i;
arch_get_mdio_control(name);
/* Auto-detect phy_addr */
if (!macb_phy_find(macb, name))
return 0;
/* Check if the PHY is up to snuff... */
phy_id = macb_mdio_read(macb, MII_PHYSID1);
if (phy_id == 0xffff) {
printf("%s: No PHY present\n", name);
return 0;
}
#ifdef CONFIG_PHYLIB
#ifdef CONFIG_DM_ETH
macb->phydev = phy_connect(macb->bus, macb->phy_addr, dev,
macb->phy_interface);
#else
/* need to consider other phy interface mode */
macb->phydev = phy_connect(macb->bus, macb->phy_addr, &macb->netdev,
PHY_INTERFACE_MODE_RGMII);
#endif
if (!macb->phydev) {
printf("phy_connect failed\n");
return -ENODEV;
}
phy_config(macb->phydev);
#endif
status = macb_mdio_read(macb, MII_BMSR);
if (!(status & BMSR_LSTATUS)) {
/* Try to re-negotiate if we don't have link already. */
macb_phy_reset(macb, name);
for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
status = macb_mdio_read(macb, MII_BMSR);
if (status & BMSR_LSTATUS)
break;
udelay(100);
}
}
if (!(status & BMSR_LSTATUS)) {
printf("%s: link down (status: 0x%04x)\n",
name, status);
return 0;
}
/* First check for GMAC and that it is GiB capable */
if (gem_is_gigabit_capable(macb)) {
lpa = macb_mdio_read(macb, MII_STAT1000);
if (lpa & (LPA_1000FULL | LPA_1000HALF)) {
duplex = ((lpa & LPA_1000FULL) ? 1 : 0);
printf("%s: link up, 1000Mbps %s-duplex (lpa: 0x%04x)\n",
name,
duplex ? "full" : "half",
lpa);
ncfgr = macb_readl(macb, NCFGR);
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
ncfgr |= GEM_BIT(GBE);
if (duplex)
ncfgr |= MACB_BIT(FD);
macb_writel(macb, NCFGR, ncfgr);
return 1;
}
}
/* fall back for EMAC checking */
adv = macb_mdio_read(macb, MII_ADVERTISE);
lpa = macb_mdio_read(macb, MII_LPA);
media = mii_nway_result(lpa & adv);
speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
? 1 : 0);
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
name,
speed ? "100" : "10",
duplex ? "full" : "half",
lpa);
ncfgr = macb_readl(macb, NCFGR);
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD) | GEM_BIT(GBE));
if (speed)
//.........这里部分代码省略.........
开发者ID:RobertCNelson，项目名称:u-boot-boards，代码行数:101，代码来源:macb.c
注：本文中的MACB_BIT函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论