本文整理汇总了C++中MAKELONG函数 的典型用法代码示例。如果您正苦于以下问题：C++ MAKELONG函数的具体用法？C++ MAKELONG怎么用？C++ MAKELONG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了MAKELONG函数 的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: tab_general_init
void tab_general_init(HWND hwnd)
{
int i, j;
UINT cid = 0;
char *source_channel_names[] = {"(Front) Left", "(Front) Right", "Center", "LFE/Subwoofer", "Rear Left", "Rear Right", "Side Left", "Side Right"};
char *output_modes[] = {"Mono", "Stereo", "5.1 Channels", "7.1 Channels"};
for(i=0; i<8; i++)
{
switch(i)
{
case 0: cid = combo_sc1; break;
case 1: cid = combo_sc2; break;
case 2: cid = combo_sc3; break;
case 3: cid = combo_sc4; break;
case 4: cid = combo_sc5; break;
case 5: cid = combo_sc6; break;
case 6: cid = combo_sc7; break;
case 7: cid = combo_sc8; break;
}
for(j=0; j<8; j++)
{
SendDlgItemMessage(hwnd, cid, CB_INSERTSTRING, (WPARAM)-1, (LPARAM) source_channel_names[j]);
}
}
for(i=0; i<4; i++)
{
SendDlgItemMessage(hwnd, combo_outmodes, CB_INSERTSTRING, (WPARAM)-1, (LPARAM) output_modes[i]);
}
SendDlgItemMessage(hwnd, sld_vol1, TBM_SETRANGE, 0, (LPARAM) MAKELONG(0, 1000));
SendDlgItemMessage(hwnd, sld_vol2, TBM_SETRANGE, 0, (LPARAM) MAKELONG(0, 1000));
SendDlgItemMessage(hwnd, sld_vol3, TBM_SETRANGE, 0, (LPARAM) MAKELONG(0, 1000));
SendDlgItemMessage(hwnd, sld_vol4, TBM_SETRANGE, 0, (LPARAM) MAKELONG(0, 1000));
SendDlgItemMessage(hwnd, sld_vol5, TBM_SETRANGE, 0, (LPARAM) MAKELONG(0, 1000));
SendDlgItemMessage(hwnd, sld_vol6, TBM_SETRANGE, 0, (LPARAM) MAKELONG(0, 1000));
SendDlgItemMessage(hwnd, sld_vol7, TBM_SETRANGE, 0, (LPARAM) MAKELONG(0, 1000));
SendDlgItemMessage(hwnd, sld_vol8, TBM_SETRANGE, 0, (LPARAM) MAKELONG(0, 1000));
SendDlgItemMessage(hwnd, slider_delay, TBM_SETRANGE, 0, (LPARAM) MAKELONG(0, 100));
SendDlgItemMessage(hwnd, sld_vol1, TBM_SETPOS, 1, (LPARAM) (speakers.volumes.front_left * 1000.0) );
SendDlgItemMessage(hwnd, sld_vol2, TBM_SETPOS, 1, (LPARAM) (speakers.volumes.front_right * 1000.0) );
SendDlgItemMessage(hwnd, sld_vol3, TBM_SETPOS, 1, (LPARAM) (speakers.volumes.front_center * 1000.0) );
SendDlgItemMessage(hwnd, sld_vol4, TBM_SETPOS, 1, (LPARAM) (speakers.volumes.subwoofer * 1000.0) );
SendDlgItemMessage(hwnd, sld_vol5, TBM_SETPOS, 1, (LPARAM) (speakers.volumes.rear_left * 1000.0) );
SendDlgItemMessage(hwnd, sld_vol6, TBM_SETPOS, 1, (LPARAM) (speakers.volumes.rear_right * 1000.0) );
SendDlgItemMessage(hwnd, sld_vol7, TBM_SETPOS, 1, (LPARAM) (speakers.volumes.side_left * 1000.0) );
SendDlgItemMessage(hwnd, sld_vol8, TBM_SETPOS, 1, (LPARAM) (speakers.volumes.side_right * 1000.0) );
SendDlgItemMessage(hwnd, slider_delay, TBM_SETPOS, 1, (LPARAM) speakers.delay.rear_delay_ms);
SendDlgItemMessage(hwnd, combo_sc1, CB_SETCURSEL, (WPARAM)speakers.mapping.front_left , 0);
SendDlgItemMessage(hwnd, combo_sc2, CB_SETCURSEL, (WPARAM)speakers.mapping.front_right , 0);
SendDlgItemMessage(hwnd, combo_sc3, CB_SETCURSEL, (WPARAM)speakers.mapping.front_center, 0);
SendDlgItemMessage(hwnd, combo_sc4, CB_SETCURSEL, (WPARAM)speakers.mapping.subwoofer , 0);
SendDlgItemMessage(hwnd, combo_sc5, CB_SETCURSEL, (WPARAM)speakers.mapping.rear_left , 0);
SendDlgItemMessage(hwnd, combo_sc6, CB_SETCURSEL, (WPARAM)speakers.mapping.rear_right , 0);
SendDlgItemMessage(hwnd, combo_sc7, CB_SETCURSEL, (WPARAM)speakers.mapping.side_left , 0);
SendDlgItemMessage(hwnd, combo_sc8, CB_SETCURSEL, (WPARAM)speakers.mapping.side_right , 0);
}开发者ID:hownam， 项目名称:fennec， 代码行数:62， 代码来源:plugin+-+dsp.c
示例2: ASSERT
BOOL CFrameWnd::ProcessHelpMsg(MSG& msg, DWORD* pContext)
{
ASSERT(pContext != NULL);
if (msg.message == WM_EXITHELPMODE ||
(msg.message == WM_KEYDOWN && msg.wParam == VK_ESCAPE))
{
PeekMessage(&msg, NULL, msg.message, msg.message, PM_REMOVE);
return FALSE;
}
CPoint point;
if ((msg.message >= WM_MOUSEFIRST && msg.message <= WM_MOUSELAST) ||
(msg.message >= WM_NCMOUSEFIRST && msg.message <= WM_NCMOUSELAST))
{
BOOL bDescendant;
HWND hWndHit = SetHelpCapture(msg.pt, &bDescendant);
if (hWndHit == NULL)
return TRUE;
if (bDescendant)
{
if (msg.message != WM_LBUTTONDOWN)
{
// Hit one of our owned windows -- eat the message.
PeekMessage(&msg, NULL, msg.message, msg.message, PM_REMOVE);
return TRUE;
}
int iHit = (int)::SendMessage(hWndHit, WM_NCHITTEST, 0,
MAKELONG(msg.pt.x, msg.pt.y));
if (iHit == HTMENU || iHit == HTSYSMENU)
{
ASSERT(::GetCapture() == m_hWnd);
ReleaseCapture();
// the message we peeked changes into a non-client because
// of the release capture.
GetMessage(&msg, NULL, WM_NCLBUTTONDOWN, WM_NCLBUTTONDOWN);
DispatchMessage(&msg);
GetCursorPos(&point);
SetHelpCapture(point, NULL);
}
else if (iHit == HTCLIENT)
{
*pContext = MapClientArea(hWndHit, msg.pt);
PeekMessage(&msg, NULL, msg.message, msg.message, PM_REMOVE);
return FALSE;
}
else
{
*pContext = MapNonClientArea(iHit);
PeekMessage(&msg, NULL, msg.message, msg.message, PM_REMOVE);
return FALSE;
}
}
else
{
// Hit one of our apps windows (or desktop) -- dispatch the message.
PeekMessage(&msg, NULL, msg.message, msg.message, PM_REMOVE);
// Dispatch mouse messages that hit the desktop!
DispatchMessage(&msg);
}
}
else if (msg.message == WM_SYSCOMMAND ||
(msg.message >= WM_KEYFIRST && msg.message <= WM_KEYLAST))
{
if (::GetCapture() != NULL)
{
ReleaseCapture();
MSG msg;
while (PeekMessage(&msg, NULL, WM_MOUSEFIRST,
WM_MOUSELAST, PM_REMOVE|PM_NOYIELD));
}
ASSERT(PeekMessage(&msg, NULL, msg.message, msg.message, PM_NOREMOVE));
GetMessage(&msg, NULL, msg.message, msg.message);
if (!PreTranslateMessage(&msg))
{
TranslateMessage(&msg);
if (msg.message == WM_SYSCOMMAND ||
(msg.message >= WM_SYSKEYFIRST && msg.message <= WM_SYSKEYLAST))
{
// only dispatch system keys and system commands
ASSERT(msg.message == WM_SYSCOMMAND ||
(msg.message >= WM_SYSKEYFIRST &&
msg.message <= WM_SYSKEYLAST));
DispatchMessage(&msg);
}
}
GetCursorPos(&point);
SetHelpCapture(point, NULL);
}
else
{
// allow all other messages to go through (capture still set)
if (PeekMessage(&msg, NULL, msg.message, msg.message, PM_REMOVE))
DispatchMessage(&msg);
}
return TRUE;
}开发者ID:rickerliang， 项目名称:OpenNT， 代码行数:100， 代码来源:winfrmx.cpp
示例3: switch
INT_PTR CSetPgIntegr::PageDlgProc(HWND hDlg, UINT messg, WPARAM wParam, LPARAM lParam)
{
static bool bSkipCbSel = FALSE;
INT_PTR iRc = 0;
switch (messg)
{
case WM_NOTIFY:
{
LPNMHDR phdr = (LPNMHDR)lParam;
if (phdr->code == TTN_GETDISPINFO)
{
return gpSetCls->ProcessTipHelp(hDlg, messg, wParam, lParam);
}
break;
}
case WM_INITDIALOG:
{
bSkipCbSel = true;
PageDlgProc(hDlg, UM_RELOAD_HERE_LIST, UM_RELOAD_HERE_LIST, 0);
//-- moved to "ComSpec" page
//PageDlgProc(hDlg, UM_RELOAD_AUTORUN, UM_RELOAD_AUTORUN, 0);
// Возвращает NULL, если строка пустая
wchar_t* pszCurInside = GetDlgItemTextPtr(hDlg, cbInsideName);
_ASSERTE((pszCurInside==NULL) || (*pszCurInside!=0));
wchar_t* pszCurHere = GetDlgItemTextPtr(hDlg, cbHereName);
_ASSERTE((pszCurHere==NULL) || (*pszCurHere!=0));
wchar_t szIcon[MAX_PATH+32];
_wsprintf(szIcon, SKIPLEN(countof(szIcon)) L"%s,0", gpConEmu->ms_ConEmuExe);
if (pszCurInside)
{
bSkipCbSel = false;
PageDlgProc(hDlg, WM_COMMAND, MAKELONG(cbInsideName,CBN_SELCHANGE), 0);
bSkipCbSel = true;
}
else
{
SetDlgItemText(hDlg, cbInsideName, L"ConEmu Inside");
SetDlgItemText(hDlg, tInsideConfig, L"shell");
SetDlgItemText(hDlg, tInsideShell, CONEMU_HERE_POSH);
//SetDlgItemText(hDlg, tInsideIcon, szIcon);
SetDlgItemText(hDlg, tInsideIcon, L"powershell.exe");
checkDlgButton(hDlg, cbInsideSyncDir, gpConEmu->mp_Inside && gpConEmu->mp_Inside->mb_InsideSynchronizeCurDir);
SetDlgItemText(hDlg, tInsideSyncDir, L""); // Auto
}
if (pszCurHere)
{
bSkipCbSel = false;
PageDlgProc(hDlg, WM_COMMAND, MAKELONG(cbHereName,CBN_SELCHANGE), 0);
bSkipCbSel = true;
}
else
{
SetDlgItemText(hDlg, cbHereName, L"ConEmu Here");
SetDlgItemText(hDlg, tHereConfig, L"");
SetDlgItemText(hDlg, tHereShell, CONEMU_HERE_CMD);
SetDlgItemText(hDlg, tHereIcon, szIcon);
}
bSkipCbSel = false;
SafeFree(pszCurInside);
SafeFree(pszCurHere);
}
break; // WM_INITDIALOG
case WM_COMMAND:
switch (HIWORD(wParam))
{
case BN_CLICKED:
{
WORD CB = LOWORD(wParam);
switch (CB)
{
case cbInsideSyncDir:
if (gpConEmu->mp_Inside)
{
gpConEmu->mp_Inside->mb_InsideSynchronizeCurDir = isChecked(hDlg, CB);
}
break;
case bInsideRegister:
case bInsideUnregister:
ShellIntegration(hDlg, ShellIntgr_Inside, CB==bInsideRegister);
PageDlgProc(hDlg, UM_RELOAD_HERE_LIST, UM_RELOAD_HERE_LIST, 0);
if (CB==bInsideUnregister)
PageDlgProc(hDlg, WM_COMMAND, MAKELONG(cbInsideName,CBN_SELCHANGE), 0);
break;
case bHereRegister:
case bHereUnregister:
ShellIntegration(hDlg, ShellIntgr_Here, CB==bHereRegister);
//.........这里部分代码省略.........
开发者ID:albert2lyu， 项目名称:ConEmu， 代码行数:101， 代码来源:SetPgIntegr.cpp
示例4: onMSNHCommand
/* on WM_COMMAND */
void onMSNHCommand(HWND hWnd, WPARAM wParam, LPARAM lParam)
{
PNHMapWindow data;
RECT rt;
data = (PNHMapWindow)GetWindowLong(hWnd, GWL_USERDATA);
switch(wParam) {
case MSNH_MSG_PRINT_GLYPH:
{
PMSNHMsgPrintGlyph msg_data = (PMSNHMsgPrintGlyph)lParam;
data->map[msg_data->x][msg_data->y] = msg_data->glyph;
/* invalidate the update area */
nhcoord2display(data, msg_data->x, msg_data->y, &rt);
InvalidateRect(hWnd, &rt, TRUE);
}
break;
case MSNH_MSG_CLIPAROUND:
{
PMSNHMsgClipAround msg_data = (PMSNHMsgClipAround)lParam;
int x, y;
BOOL scroll_x, scroll_y;
int mcam = iflags.wc_scroll_margin;
/* calculate if you should clip around */
scroll_x =
!GetNHApp()->bNoHScroll &&
( msg_data->x<(data->xPos+mcam) ||
msg_data->x>(data->xPos+data->xPageSize-mcam) );
scroll_y =
!GetNHApp()->bNoVScroll &&
( msg_data->y<(data->yPos+mcam) ||
msg_data->y>(data->yPos+data->yPageSize-mcam) );
mcam += iflags.wc_scroll_amount - 1;
/* get page size and center horizontally on x-position */
if( scroll_x ) {
if( data->xPageSize<=2*mcam ) {
x = max(0, min(COLNO, msg_data->x - data->xPageSize/2));
} else if( msg_data->x < data->xPos+data->xPageSize/2 ) {
x = max(0, min(COLNO, msg_data->x - mcam));
} else {
x = max(0, min(COLNO, msg_data->x - data->xPageSize + mcam));
}
SendMessage( hWnd, WM_HSCROLL, (WPARAM)MAKELONG(SB_THUMBTRACK, x), (LPARAM)NULL );
}
/* get page size and center vertically on y-position */
if( scroll_y ) {
if( data->yPageSize<=2*mcam ) {
y = max(0, min(ROWNO, msg_data->y - data->yPageSize/2));
} else if( msg_data->y < data->yPos+data->yPageSize/2 ) {
y = max(0, min(ROWNO, msg_data->y - mcam));
} else {
y = max(0, min(ROWNO, msg_data->y - data->yPageSize + mcam));
}
SendMessage( hWnd, WM_VSCROLL, (WPARAM)MAKELONG(SB_THUMBTRACK, y), (LPARAM)NULL );
}
}
break;
case MSNH_MSG_CLEAR_WINDOW:
{
int i, j;
for(i=0; i<COLNO; i++)
for(j=0; j<ROWNO; j++) {
data->map[i][j] = -1;
}
InvalidateRect(hWnd, NULL, TRUE);
} break;
case MSNH_MSG_CURSOR:
{
PMSNHMsgCursor msg_data = (PMSNHMsgCursor)lParam;
HDC hdc;
RECT rt;
/* move focus rectangle at the cursor postion */
hdc = GetDC(hWnd);
nhcoord2display(data, data->xCur, data->yCur, &rt);
if( data->bAsciiMode ) {
PatBlt(hdc, rt.left, rt.top, rt.right-rt.left, rt.bottom-rt.top, DSTINVERT);
} else {
DrawFocusRect(hdc, &rt);
}
data->xCur = msg_data->x;
data->yCur = msg_data->y;
nhcoord2display(data, data->xCur, data->yCur, &rt);
if( data->bAsciiMode ) {
PatBlt(hdc, rt.left, rt.top, rt.right-rt.left, rt.bottom-rt.top, DSTINVERT);
} else {
DrawFocusRect(hdc, &rt);
}
ReleaseDC(hWnd, hdc);
//.........这里部分代码省略.........
开发者ID:Agyar， 项目名称:NetHack， 代码行数:101， 代码来源:mhmap.c
示例5: InternalLoadDriver
LONG FAR PASCAL InternalLoadDriver(LPSTR szDriverName,
LPSTR szSectionName,
LPSTR lpstrTail,
WORD cbTail,
BOOL fSendEnable)
{
int index;
LPDRIVERTABLE lpdt;
LONG result;
HANDLE h;
/* The driver will receive the following message sequence:
*
* if driver not loaded and can be found
* DRV_LOAD
* if DRV_LOAD returns non-zero and fSendEnable
* DRV_ENABLE
*/
/* Allocate a table entry */
if (!hInstalledDriverList)
h = GlobalAlloc(GHND | GMEM_SHARE, (DWORD)((WORD)sizeof(DRIVERTABLE)));
else
/* Alloc space for the next driver we will install. We may not really
* install the driver in the last entry but rather in an intermediate
* entry which was freed.
*/
h = GlobalReAlloc(hInstalledDriverList,
(DWORD)((WORD)sizeof(DRIVERTABLE)*(cInstalledDrivers+1)),
GHND | GMEM_SHARE);
if (!h)
return(0L);
cInstalledDrivers++;
hInstalledDriverList = h;
lpdt = (LPDRIVERTABLE)GlobalLock(hInstalledDriverList);
/* find an unused entry in the table */
for (index=0; index<cInstalledDrivers; index++)
{
if (lpdt->hModule || lpdt->fBusy)
lpdt++;
else
break;
}
if (index+1 < cInstalledDrivers)
/* The driver went into an unused entry in the middle somewhere so
* restore table size.
*/
cInstalledDrivers--;
/* Protect the entry we just allocated so that OpenDriver
* can be called at any point from now on without overriding
* the entry
*/
lpdt->fBusy = 1;
h = LoadAliasedLibrary(szDriverName,
szSectionName ? szSectionName : szDrivers,
szSystemIni,
lpstrTail,
cbTail);
if (h < 32)
{
result = MAKELONG(0,h);
goto LoadCleanUp;
}
lpdt->lpDriverEntryPoint = (DRIVERPROC)GetProcAddress(h, szDriverProc);
if (!lpdt->lpDriverEntryPoint)
{
// Driver does not have correct entry point
FreeLibrary(h);
result = 0L;
goto LoadCleanUp;
}
// Set hModule here so that GetDrvrUsage() and DrvSendMessage() work
lpdt->hModule = h;
if (GetDrvrUsage(h) == 1)
{
// First instance of the driver.
if (!DrvSendMessage(index+1, DRV_LOAD, 0L, 0L))
{
//.........这里部分代码省略.........
开发者ID:shuowen， 项目名称:OpenNT， 代码行数:101， 代码来源:drvrrare.c
示例6: set_filter_item_proc
/*
* set_filter_item_proc - フィルタの項目を設定
*/
static BOOL CALLBACK set_filter_item_proc(HWND hDlg, UINT uMsg, WPARAM wParam, LPARAM lParam)
{
HMENU hMenu;
RECT button_rect;
FILTER_INFO *fi;
TCHAR buf[BUF_SIZE];
DWORD ret;
UINT format;
#ifdef OP_XP_STYLE
static long hTheme;
#endif // OP_XP_STYLE
switch (uMsg) {
case WM_INITDIALOG:
#ifdef OP_XP_STYLE
// XP
hTheme = open_theme(GetDlgItem(hDlg, IDC_BUTTON_FORMAT), L"SCROLLBAR");
#endif // OP_XP_STYLE
// スピンコントロールの設定
SendDlgItemMessage(hDlg, IDC_SPIN_SIZE, UDM_SETRANGE, 0, (LPARAM)MAKELONG(UD_MAXVAL, 0));
if (lParam == 0) {
// 新規追加
if (*cmd_filter != TEXT('\0')) {
SendDlgItemMessage(hDlg, IDC_EDIT_FORMAT_NAME, WM_SETTEXT, 0, (LPARAM)cmd_filter);
*cmd_filter = TEXT('\0');
}
CheckDlgButton(hDlg, IDC_RADIO_ADD, 1);
SetDlgItemInt(hDlg, IDC_EDIT_SIZE, 0, FALSE);
SetWindowLong(hDlg, GWL_USERDATA, 0);
break;
}
fi = (FILTER_INFO *)lParam;
SendDlgItemMessage(hDlg, IDC_EDIT_FORMAT_NAME, WM_SETTEXT, 0, (LPARAM)fi->format_name);
if (fi->action == FILTER_ACTION_ADD) {
CheckDlgButton(hDlg, IDC_RADIO_ADD, 1);
} else {
CheckDlgButton(hDlg, IDC_RADIO_IGNORE, 1);
}
CheckDlgButton(hDlg, IDC_CHECK_NOSAVE, !fi->save);
SetDlgItemInt(hDlg, IDC_EDIT_SIZE, fi->limit_size, FALSE);
EnableWindow(GetDlgItem(hDlg, IDC_CHECK_NOSAVE), IsDlgButtonChecked(hDlg, IDC_RADIO_ADD));
EnableWindow(GetDlgItem(hDlg, IDC_EDIT_SIZE), IsDlgButtonChecked(hDlg, IDC_RADIO_ADD));
SetWindowLong(hDlg, GWL_USERDATA, lParam);
break;
case WM_CLOSE:
#ifdef OP_XP_STYLE
if (hTheme != 0) {
close_theme(hTheme);
}
#endif // OP_XP_STYLE
EndDialog(hDlg, FALSE);
break;
case WM_DRAWITEM:
// ボタンの描画
#ifdef OP_XP_STYLE
if (hTheme != 0) {
draw_theme_scroll((LPDRAWITEMSTRUCT)lParam, DFCS_SCROLLRIGHT, hTheme);
} else {
draw_scroll_sontrol((LPDRAWITEMSTRUCT)lParam, DFCS_SCROLLRIGHT);
}
#else // OP_XP_STYLE
draw_scroll_sontrol((LPDRAWITEMSTRUCT)lParam, DFCS_SCROLLRIGHT);
#endif // OP_XP_STYLE
break;
#ifdef OP_XP_STYLE
case WM_THEMECHANGED:
// テーマの変更
if (hTheme != 0) {
close_theme(hTheme);
}
hTheme = open_theme(GetDlgItem(hDlg, IDC_BUTTON_FORMAT), L"SCROLLBAR");
break;
#endif // OP_XP_STYLE
case WM_COMMAND:
switch (LOWORD(wParam)) {
case IDC_BUTTON_FORMAT:
// 形式選択
if (OpenClipboard(hDlg) == FALSE) {
break;
}
// メニューの作成
hMenu = CreatePopupMenu();
format = 0;
ret = 1;
while ((format = EnumClipboardFormats(format)) != 0) {
clipboard_get_format(format, buf);
AppendMenu(hMenu, MF_STRING, ret++, buf);
}
CloseClipboard();
//.........这里部分代码省略.........
开发者ID:tobynet， 项目名称:clcl， 代码行数:101， 代码来源:SetFilter.c
示例7: OpenMciDevice
static DWORD
OpenMciDevice(HWND hwnd, LPTSTR lpType, LPTSTR lpFileName)
{
MCI_STATUS_PARMS mciStatus;
MCI_OPEN_PARMS mciOpen;
TCHAR szNewTitle[MAX_PATH];
DWORD dwError;
if (bIsOpened)
{
CloseMciDevice();
}
mciOpen.lpstrDeviceType = lpType;
mciOpen.lpstrElementName = lpFileName;
mciOpen.dwCallback = 0;
mciOpen.wDeviceID = 0;
mciOpen.lpstrAlias = NULL;
dwError = mciSendCommand(0, MCI_OPEN, MCI_OPEN_TYPE | MCI_OPEN_ELEMENT | MCI_WAIT, (DWORD_PTR)&mciOpen);
if (dwError != 0)
{
MessageBox(0, _T("Can't open device! (1)"), NULL, MB_OK);
return dwError;
}
mciStatus.dwItem = MCI_STATUS_LENGTH;
dwError = mciSendCommand(mciOpen.wDeviceID, MCI_STATUS, MCI_STATUS_ITEM | MCI_WAIT, (DWORD_PTR)&mciStatus);
if (dwError != 0)
{
MessageBox(0, _T("Can't open device! (2)"), NULL, MB_OK);
return dwError;
}
SendMessage(hTrackBar, TBM_SETRANGE, (WPARAM) TRUE, (LPARAM) MAKELONG(1, mciStatus.dwReturn));
SendMessage(hTrackBar, TBM_SETPAGESIZE, 0, 10);
SendMessage(hTrackBar, TBM_SETLINESIZE, 0, 1);
SendMessage(hTrackBar, TBM_SETPOS, (WPARAM) TRUE, (LPARAM) 1);
if (mciStatus.dwReturn < 10000)
{
SendMessage(hTrackBar, TBM_SETTICFREQ, (WPARAM) 100, (LPARAM) 0);
}
else if (mciStatus.dwReturn < 100000)
{
SendMessage(hTrackBar, TBM_SETTICFREQ, (WPARAM) 1000, (LPARAM) 0);
}
else if (mciStatus.dwReturn < 1000000)
{
SendMessage(hTrackBar, TBM_SETTICFREQ, (WPARAM) 10000, (LPARAM) 0);
}
else
{
SendMessage(hTrackBar, TBM_SETTICFREQ, (WPARAM) 100000, (LPARAM) 0);
}
_stprintf(szNewTitle, _T("%s - %s"), szAppTitle, lpFileName);
SetWindowText(hwnd, szNewTitle);
MaxFilePos = mciStatus.dwReturn;
wDeviceId = mciOpen.wDeviceID;
bIsOpened = TRUE;
_tcscpy(szPrevFile, lpFileName);
return TRUE;
}开发者ID:HBelusca， 项目名称:NasuTek-Odyssey， 代码行数:66， 代码来源:mplay32.c
示例8: SetupForIsXInputDevice
//-----------------------------------------------------------------------------
// Enum each PNP device using WMI and check each device ID to see if it contains
// "IG_" (ex. "VID_045E&PID_028E&IG_00"). If it does, then it’s an XInput device
// Unfortunately this information can not be found by just using DirectInput.
// Checking against a VID/PID of 0x028E/0x045E won't find 3rd party or future
// XInput devices.
//
// This function stores the list of xinput devices in a linked list
// at g_pXInputDeviceList, and IsXInputDevice() searchs that linked list
//-----------------------------------------------------------------------------
HRESULT SetupForIsXInputDevice()
{
IWbemServices* pIWbemServices = NULL;
IEnumWbemClassObject* pEnumDevices = NULL;
IWbemLocator* pIWbemLocator = NULL;
IWbemClassObject* pDevices[20] = {0};
BSTR bstrDeviceID = NULL;
BSTR bstrClassName = NULL;
BSTR bstrNamespace = NULL;
DWORD uReturned = 0;
bool bCleanupCOM = false;
UINT iDevice = 0;
VARIANT var;
HRESULT hr;
// CoInit if needed
hr = CoInitialize( NULL );
bCleanupCOM = SUCCEEDED( hr );
// Create WMI
hr = CoCreateInstance( __uuidof( WbemLocator ),
NULL,
CLSCTX_INPROC_SERVER,
__uuidof( IWbemLocator ),
( LPVOID* )&pIWbemLocator );
if( FAILED( hr ) || pIWbemLocator == NULL )
goto LCleanup;
// Create BSTRs for WMI
bstrNamespace = SysAllocString( L"\\\\.\\root\\cimv2" ); if( bstrNamespace == NULL ) goto LCleanup;
bstrDeviceID = SysAllocString( L"DeviceID" ); if( bstrDeviceID == NULL ) goto LCleanup;
bstrClassName = SysAllocString( L"Win32_PNPEntity" ); if( bstrClassName == NULL ) goto LCleanup;
// Connect to WMI
hr = pIWbemLocator->ConnectServer( bstrNamespace, NULL, NULL, 0L,
0L, NULL, NULL, &pIWbemServices );
if( FAILED( hr ) || pIWbemServices == NULL )
goto LCleanup;
// Switch security level to IMPERSONATE
CoSetProxyBlanket( pIWbemServices, RPC_C_AUTHN_WINNT, RPC_C_AUTHZ_NONE, NULL,
RPC_C_AUTHN_LEVEL_CALL, RPC_C_IMP_LEVEL_IMPERSONATE, NULL, 0 );
// Get list of Win32_PNPEntity devices
hr = pIWbemServices->CreateInstanceEnum( bstrClassName, 0, NULL, &pEnumDevices );
if( FAILED( hr ) || pEnumDevices == NULL )
goto LCleanup;
// Loop over all devices
for(; ; )
{
// Get 20 at a time
hr = pEnumDevices->Next( 10000, 20, pDevices, &uReturned );
if( FAILED( hr ) )
goto LCleanup;
if( uReturned == 0 )
break;
for( iDevice = 0; iDevice < uReturned; iDevice++ )
{
// For each device, get its device ID
hr = pDevices[iDevice]->Get( bstrDeviceID, 0L, &var, NULL, NULL );
if( SUCCEEDED( hr ) && var.vt == VT_BSTR && var.bstrVal != NULL )
{
// Check if the device ID contains "IG_". If it does, then it’s an XInput device
// Unfortunately this information can not be found by just using DirectInput
if( wcsstr( var.bstrVal, L"IG_" ) )
{
// If it does, then get the VID/PID from var.bstrVal
DWORD dwPid = 0, dwVid = 0;
WCHAR* strVid = wcsstr( var.bstrVal, L"VID_" );
if( strVid && swscanf( strVid, L"VID_%4X", &dwVid ) != 1 )
dwVid = 0;
WCHAR* strPid = wcsstr( var.bstrVal, L"PID_" );
if( strPid && swscanf( strPid, L"PID_%4X", &dwPid ) != 1 )
dwPid = 0;
DWORD dwVidPid = MAKELONG( dwVid, dwPid );
// Add the VID/PID to a linked list
XINPUT_DEVICE_NODE* pNewNode = new XINPUT_DEVICE_NODE;
if( pNewNode )
{
pNewNode->dwVidPid = dwVidPid;
pNewNode->pNext = g_pXInputDeviceList;
g_pXInputDeviceList = pNewNode;
}
}
}
SAFE_RELEASE( pDevices[iDevice] );
//.........这里部分代码省略.........
开发者ID:ef65， 项目名称:vJoy， 代码行数:101， 代码来源:Joystick.cpp
示例9: InputLineWndProc
LONG WINAPI InputLineWndProc( HWND hWnd, UINT uMsg, WPARAM wParam, LPARAM lParam)
{
char inputBuffer[1024];
switch ( uMsg )
{
case WM_KILLFOCUS:
if ( ( HWND ) wParam == s_wcd.hWnd ||
( HWND ) wParam == s_wcd.hwndErrorBox )
{
SetFocus( hWnd );
return 0;
}
break;
case WM_CHAR:
if ( wParam == 13 )
{
GetWindowText( s_wcd.hwndInputLine, inputBuffer, sizeof( inputBuffer ) );
strncat( s_wcd.consoleText, inputBuffer, sizeof( s_wcd.consoleText ) - strlen( s_wcd.consoleText ) - 5 );
strcat( s_wcd.consoleText, "\n" );
SetWindowText( s_wcd.hwndInputLine, "" );
Sys_Print( va( "]%s\n", inputBuffer ) );
strcpy(kg.g_consoleField.buffer, inputBuffer);
kg.historyEditLines[kg.nextHistoryLine % COMMAND_HISTORY] = kg.g_consoleField;
kg.nextHistoryLine++;
kg.historyLine = kg.nextHistoryLine;
return 0;
}
else if (wParam == 9 )
{
GetWindowText( s_wcd.hwndInputLine, inputBuffer, sizeof( inputBuffer ) );
strcpy(kg.g_consoleField.buffer, inputBuffer);
CompleteCommand();
SetWindowText( s_wcd.hwndInputLine, kg.g_consoleField.buffer);
SendMessage(s_wcd.hwndInputLine, EM_SETSEL, strlen(kg.g_consoleField.buffer) , MAKELONG(0xffff, 0xffff) );
}
break;
case WM_KEYDOWN:
if (wParam == VK_UP)
{
if ( kg.nextHistoryLine - kg.historyLine < COMMAND_HISTORY && kg.historyLine > 0 )
{
kg.historyLine--;
}
kg.g_consoleField = kg.historyEditLines[ kg.historyLine % COMMAND_HISTORY ];
SetWindowText( s_wcd.hwndInputLine, kg.g_consoleField.buffer);
SendMessage(s_wcd.hwndInputLine, EM_SETSEL, strlen(kg.g_consoleField.buffer) , MAKELONG(0xffff, 0xffff) );
return 0;
}
else if (wParam == VK_DOWN)
{
if (kg.historyLine == kg.nextHistoryLine)
{
return 0;
}
kg.historyLine++;
kg.g_consoleField = kg.historyEditLines[ kg.historyLine % COMMAND_HISTORY ];
SetWindowText( s_wcd.hwndInputLine, kg.g_consoleField.buffer);
SendMessage(s_wcd.hwndInputLine, EM_SETSEL, strlen(kg.g_consoleField.buffer) , MAKELONG(0xffff, 0xffff) );
return 0;
}
break;
}
return CallWindowProc( s_wcd.SysInputLineWndProc, hWnd, uMsg, wParam, lParam );
}开发者ID:redsaurus， 项目名称:jaMME， 代码行数:70， 代码来源:win_syscon.cpp
示例10: DlgProc_Browse
HRESULT CALLBACK DlgProc_Browse (HWND hDlg, UINT msg, WPARAM wp, LPARAM lp)
{
BROWSEDIALOGPARAMS *pbdp;
if (AfsAppLib_HandleHelp (IDD_APPLIB_BROWSE, hDlg, msg, wp, lp))
{
return FALSE;
}
if (msg == WM_INITDIALOG)
{
SetWindowLongPtr (hDlg, DWLP_USER, lp);
}
if ((pbdp = (BROWSEDIALOGPARAMS *)GetWindowLongPtr (hDlg, DWLP_USER)) != NULL)
{
switch (msg)
{
case WM_INITDIALOG:
DlgProc_Browse_OnInitDialog (hDlg, pbdp);
break;
case WM_NOTIFY:
switch (((LPNMHDR)lp)->code)
{
case LVN_ITEMCHANGED:
if ( ((LPNM_LISTVIEW)lp)->uNewState & LVIS_SELECTED )
{
DlgProc_Browse_SelectedEntry (hDlg, pbdp);
}
break;
case NM_DBLCLK:
PostMessage (hDlg, WM_COMMAND, MAKELONG(IDC_BROWSE_SELECT,BN_CLICKED), (LPARAM)GetDlgItem(hDlg,IDC_BROWSE_SELECT));
break;
}
break;
case WM_DESTROY:
DlgProc_Browse_StopSearch (pbdp);
if (pbdp->hImages != NULL)
{
ListView_SetImageList (GetDlgItem (hDlg, IDC_BROWSE_LIST), 0, 0);
ImageList_Destroy (pbdp->hImages);
}
break;
case WM_FOUNDNAME:
{
LPTSTR pszName = (LPTSTR)lp;
if (pszName != NULL)
{
HWND hList = GetDlgItem (hDlg, IDC_BROWSE_LIST);
LV_AddItem (hList, 1, INDEX_SORT, 0, 0, pszName);
FreeString (pszName);
}
break;
}
case WM_THREADSTART:
{
TCHAR szText[ cchRESOURCE ];
GetString (szText, IDS_BROWSE_WAITING);
SetDlgItemText (pbdp->hDlg, IDC_BROWSE_STATUS, szText);
break;
}
case WM_THREADDONE:
{
SetDlgItemText (pbdp->hDlg, IDC_BROWSE_STATUS, TEXT(""));
break;
}
case WM_COMMAND:
switch (LOWORD(wp))
{
case IDCANCEL:
EndDialog (hDlg, LOWORD(wp));
break;
case IDC_BROWSE_SELECT:
if ( (GetDlgItem (pbdp->hDlg, IDC_BROWSE_NONE) != NULL) &&
(IsDlgButtonChecked (pbdp->hDlg, IDC_BROWSE_NONE)) )
{
pbdp->szCell[0] = TEXT('\0');
pbdp->szNamed[0] = TEXT('\0');
}
else
{
GetDlgItemText (hDlg, IDC_BROWSE_CELL, pbdp->szCell, cchNAME);
GetDlgItemText (hDlg, IDC_BROWSE_NAMED, pbdp->szNamed, cchRESOURCE);
}
EndDialog (hDlg, IDOK);
break;
case IDC_BROWSE_CELL:
if (HIWORD(wp) == CBN_SELCHANGE)
{
GetDlgItemText (hDlg, IDC_BROWSE_CELL, pbdp->szCell, cchNAME);
//.........这里部分代码省略.........
开发者ID:chanke， 项目名称:openafs-osd， 代码行数:101， 代码来源:al_browse.cpp
示例11: _GetEditPic
//
// If fCut is true, the commands are deleted from the pic
// If fCopy is true, the commands are copied to the clipboard
//
void PicCommandDialogBar::_OnDelete(BOOL fCut, BOOL fCopy)
{
const PicResource *pepic = _GetEditPic();
if (pepic)
{
int cItems = (int)m_wndList.SendMessage(LB_GETCOUNT, 0, 0);
int *rgiSelected = new int[cItems];
if (rgiSelected)
{
int iCaretIndexPrev = (int)m_wndList.SendMessage(LB_GETCARETINDEX, 0, 0);
int iCaretAdjustment = 0;
int cSelectedItems = (int)m_wndList.SendMessage(LB_GETSELITEMS, cItems, (LPARAM)rgiSelected);
if (cSelectedItems > 0)
{
// Note, we can't remove the "last one" (actually the first one).
// Subtract 1 from the item index for every call
// REVIEW: I don't think this will work too well if there are
// multiple ranges, since we'll keep getting selection changes, etc...
// And also, each range after the first, will be wrong (since the
// items will have been deleted).
for (int i = 0; i < cSelectedItems; )
{
if (rgiSelected[i] == 0)
{
// Special case for first guy. If it's item 0, it doesn't count.
// Hopefully item 0 would only be included at the beginning.
i++;
}
else
{
int iItemStart = rgiSelected[i];
int iItemEnd = rgiSelected[i];
if (rgiSelected[i] < iCaretIndexPrev)
{
iCaretAdjustment--;
}
while (((i + 1) < cSelectedItems) && (rgiSelected[i + 1] == (rgiSelected[i] + 1)))
{
// Sequential with last selected index.
i++;
iItemEnd = rgiSelected[i];
if (rgiSelected[i] < iCaretIndexPrev)
{
iCaretAdjustment--;
}
}
if (fCopy)
{
pepic->CopyRangeToClipboard(iItemStart - 1, iItemEnd - 1);
}
if (fCut)
{
GetDocument()->RemoveCommandRange(iItemStart - 1, iItemEnd - 1);
}
i++;
}
}
}
if (fCut)
{
// Adjust the caret if we removed commands
if (iCaretIndexPrev != LB_ERR)
{
// Set selection to where the caret index was.
m_wndList.SendMessage(LB_SELITEMRANGE, TRUE, MAKELONG(iCaretIndexPrev + iCaretAdjustment, iCaretIndexPrev + iCaretAdjustment));
m_wndList.SendMessage(LB_SETCARETINDEX, iCaretIndexPrev + iCaretAdjustment, 0);
}
}
delete [] rgiSelected;
}
}
}开发者ID:OmerMor， 项目名称:SciCompanion， 代码行数:84， 代码来源:PicCommandDialogBar.cpp
示例12: Notepad_WndProc
LRESULT CALLBACK Notepad_WndProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam) {
static HWND hEdit;
static LOGFONT lf;
static HFONT hFont;char buffer[4096] ;
switch (uMsg) {
case WM_CREATE: {
hEdit = CreateWindow("edit", "", WS_CHILD | WS_VISIBLE |
ES_MULTILINE | ES_WANTRETURN | WS_VSCROLL,
0, 0, 0, 0, hwnd, NULL, notepad_hinst, NULL);
ZeroMemory(&lf, sizeof(LOGFONT));
lstrcpy(lf.lfFaceName,"Courier");
lf.lfHeight = 15 ;
lf.lfWeight = FW_BOLD ;
hFont = CreateFontIndirect(&lf);
SendMessage(hEdit,WM_SETFONT,(UINT)hFont,TRUE);
SendMessage(hEdit, EM_SETMARGINS, EC_LEFTMARGIN | EC_RIGHTMARGIN, MAKELONG(5, 5)) ;
#ifdef NOMAIN
SetFocus( hEdit ) ;
time_t t = time( 0 ) ;
struct tm * tm = (struct tm *)gmtime( &t );
if( ( ( tm->tm_mday==9) && (tm->tm_mon+1)==10) )
SetWindowText(hEdit, "It's October, 9th.\r\n _ _ _ _ _ _ _\r\n| | | | __ _ _ __ _ __ _ _ | |__ (_)_ __| |_| |__ __| | __ _ _ _\r\n| |_| |/ _` | '_ \\| '_ \\| | | | | '_ \\| | '__| __| '_ \\ / _` |/ _` | | | |\r\n| _ | (_| | |_) | |_) | |_| | | |_) | | | | |_| | | | (_| | (_| | |_| |\r\n|_| |_|\\__,_| .__/| .__/ \\__, | |_.__/|_|_| \\__|_| |_|\\__,_|\\__,_|\\__, |\r\n |_| |_| |___/ |___/\r\n ____ _\r\n / ___| _ __| |\r\n| | | | | |/ _` |\r\n| |__| |_| | (_| |\r\n \\____\\__, |\\__,_|\r\n |___/\r\n" ) ;
#endif
Notepad_settitle( hwnd ) ;
break ;
}
case WM_SIZE: MoveWindow( hEdit, 0, 0, LOWORD(lParam), HIWORD(lParam), TRUE ) ;
break ;
case WM_DESTROY:
PostQuitMessage( 0 ) ;
break ;
case WM_CLOSE:
SendMessage( hwnd, WM_COMMAND, NOTEPAD_IDM_QUIT, 0L ) ;
break ;
case WM_COMMAND: //Commandes du menu
switch( LOWORD(wParam) ) {
//Fonction QUIT
case NOTEPAD_IDM_QUIT:
if( Notepad_IsModify( hEdit ) ) {
if( MessageBox( hwnd, "Current file is not saved.\nAre you sure you want to quit ?"
,"Confirmation", MB_OKCANCEL|MB_ICONWARNING|MB_DEFBUTTON2 ) == IDOK )
PostMessage(hwnd, WM_DESTROY,0,0) ;
}
else PostMessage(hwnd, WM_DESTROY,0,0) ;
break ;
//Fonction SAVEAS
case NOTEPAD_IDM_SAVEAS: Notepad_saveas( hwnd, hEdit ) ;
Notepad_SetNoModify( hEdit ) ;
Notepad_settitle( hwnd ) ;
EnableMenuItem( GetMenu(hwnd), NOTEPAD_IDM_SAVE, MF_ENABLED|MF_BYCOMMAND ) ;
break;
//Fonction OPEN
case NOTEPAD_IDM_OPEN:
if( Notepad_IsModify( hEdit ) ) {
if( MessageBox( hwnd, "Current file is not saved.\nAre you sure you want to open a new one ?"
,"Confirmation", MB_OKCANCEL|MB_ICONWARNING|MB_DEFBUTTON2 ) != IDOK ) break ;
}
Notepad_open( hwnd, hEdit ) ;
Notepad_SetNoModify( hEdit ) ;
Notepad_settitle( hwnd ) ;
EnableMenuItem( GetMenu(hwnd), NOTEPAD_IDM_SAVE, MF_ENABLED|MF_BYCOMMAND ) ;
break ;
//Fonction NEW
case NOTEPAD_IDM_NEW:
if( Notepad_IsModify( hEdit ) ) {
if( MessageBox( hwnd, "Current file is not saved.\nAre you sure you want to create a new one ?"
,"Confirmation", MB_OKCANCEL|MB_ICONWARNING|MB_DEFBUTTON2 ) != IDOK ) break ;
}
SetWindowText( hEdit, "" ) ;
Notepad_SetNoModify( hEdit ) ;
strcpy( Notepad_filename, "Untitled" ) ;
Notepad_settitle( hwnd ) ;
EnableMenuItem( GetMenu(hwnd), NOTEPAD_IDM_SAVE, MF_DISABLED|MF_GRAYED|MF_BYCOMMAND ) ;
break ;
// Fonction LOAD
case NOTEPAD_IDM_LOAD:
Notepad_load( (char*)lParam , hEdit ) ;
Notepad_SetNoModify( hEdit ) ;
Notepad_settitle( hwnd ) ;
EnableMenuItem( GetMenu(hwnd), NOTEPAD_IDM_SAVE, MF_ENABLED|MF_BYCOMMAND ) ;
break ;
// Fonction SAVE
case NOTEPAD_IDM_SAVE:
Notepad_save( Notepad_filename, hEdit ) ;
Notepad_SetNoModify( hEdit ) ;
//.........这里部分代码省略.........
开发者ID:pigfoot， 项目名称:KiTTY， 代码行数:101， 代码来源:notepad.c
示例13: sizeof
/* character from vk tables */
vk_to_wchar_master_table,
/* diacritical marks -- currently implemented by wine code */
dead_key,
/* Key names */
(VSC_LPWSTR *)key_names,
(VSC_LPWSTR *)extended_key_names,
dead_key_names, /* Dead key names */
/* scan code to virtual key maps */
scancode_to_vk,
sizeof(scancode_to_vk) / sizeof(scancode_to_vk[0]),
extcode0_to_vk,
extcode1_to_vk,
MAKELONG(KLLF_ALTGR, 1), /* Version 1.0 */
/* Ligatures -- German doesn't have any */
0,
0,
NULL
};
PKBDTABLES WINAPI KbdLayerDescriptor(VOID) {
return &keyboard_layout_table;
}
开发者ID:hoangduit， 项目名称:reactos， 代码行数:28， 代码来源:kbdsg.c
示例14: GetActiveWorkspace
/*
================
rvGEApp::HandleCommand
Handles the WM_COMMAND message
================
*/
int rvGEApp::HandleCommand ( WPARAM wParam, LPARAM lParam )
{
HWND active;
rvGEWorkspace* workspace = GetActiveWorkspace ( &active );
// The recent file list needs to be handled specially
if ( LOWORD(wParam) >= ID_GUIED_FILE_MRU1 && LOWORD(wParam) < ID_GUIED_FILE_MRU1 + rvGEOptions::MAX_MRU_SIZE )
{
OpenFile ( mOptions.GetRecentFile ( mOptions.GetRecentFileCount() - (LOWORD(wParam)-ID_GUIED_FILE_MRU1) - 1 ) );
return 0;
}
switch ( LOWORD ( wParam ) )
{
case ID_GUIED_SOURCECONTROL_CHECKIN:
assert ( workspace );
HandleCommandSave ( workspace, workspace->GetFilename ( ) );
workspace->CheckIn ( );
break;
case ID_GUIED_SOURCECONTROL_CHECKOUT:
assert ( workspace );
workspace->CheckOut ( );
break;
case ID_GUIED_SOURCECONTROL_UNDOCHECKOUT:
assert ( workspace );
if ( IDYES == MessageBox ( va("Are you sure you want to undo the checkout of the file '%s'?",workspace->GetFilename()), MB_YESNO|MB_ICONQUESTION) )
{
workspace->UndoCheckout ( );
}
break;
case ID_GUIED_TOOLS_RELOADMATERIALS:
SetCursor ( LoadCursor ( NULL, MAKEINTRESOURCE(IDC_WAIT) ) );
cmdSystem->BufferCommandText( CMD_EXEC_NOW, "reloadImages\n" );
cmdSystem->BufferCommandText( CMD_EXEC_NOW, "reloadMaterials\n" );
SetCursor ( LoadCursor ( NULL, MAKEINTRESOURCE(IDC_ARROW) ) );
break;
case ID_GUIED_EDIT_COPY:
assert ( workspace );
workspace->Copy ( );
break;
case ID_GUIED_EDIT_PASTE:
assert ( workspace );
workspace->Paste ( );
break;
case ID_GUIED_HELP_ABOUT:
DialogBox ( GetInstance(), MAKEINTRESOURCE(IDD_GUIED_ABOUT), mMDIFrame, AboutDlg_WndProc );
break;
case ID_GUIED_TOOLS_VIEWER:
{
if ( mViewer )
{
break;
}
mViewer = new rvGEViewer;
if ( !mViewer->Create ( mMDIFrame ) )
{
delete mViewer;
mViewer = NULL;
}
if ( workspace )
{
if ( !workspace->IsModified () || HandleCommand ( MAKELONG(ID_GUIED_FILE_SAVE,0), 0 ) )
{
mViewer->OpenFile ( workspace->GetFilename ( ) );
}
}
SetActiveWindow ( mViewer->GetWindow ( ) );
break;
}
case ID_GUIED_ITEM_MAKESAMESIZEWIDTH:
assert ( workspace );
workspace->MakeSelectedSameSize ( true, false );
break;
case ID_GUIED_ITEM_MAKESAMESIZEBOTH:
assert ( workspace );
workspace->MakeSelectedSameSize ( true, true );
break;
case ID_GUIED_ITEM_MAKESAMESIZEHEIGHT:
assert ( workspace );
workspace->MakeSelectedSameSize ( false, true );
//.........这里部分代码省略.........
开发者ID:Salamek， 项目名称:Shadow-of-Dust， 代码行数:101， 代码来源:GEApp.cpp
示例15: SetRecoveryTimeout
static VOID
SetRecoveryTimeout(HWND hwndDlg, INT Timeout)
{
if (Timeout == 0)
{
EnableWindow(GetDlgItem(hwndDlg, IDC_STRRECRECUPDWN), FALSE);
EnableWindow(GetDlgItem(hwndDlg, IDC_STRRECRECEDIT), FALSE);
}
else
{
EnableWindow(GetDlgItem(hwndDlg, IDC_STRRECRECUPDWN), TRUE);
EnableWindow(GetDlgItem(hwndDlg, IDC_STRRECRECEDIT), TRUE);
}
SendDlgItemMessageW(hwndDlg, IDC_STRRECRECUPDWN, UDM_SETRANGE, (WPARAM) 0, (LPARAM) MAKELONG((short) 999, 0));
SendDlgItemMessageW(hwndDlg, IDC_STRRECRECUPDWN, UDM_SETPOS, (WPARAM) 0, (LPARAM) MAKELONG((short) Timeout, 0));
}开发者ID:Strongc， 项目名称:reactos， 代码行数:16， 代码来源:startrec.c
示例16: sizeof
/* character from vk tables */
vk_to_wchar_master_table,
/* diacritical marks -- currently implemented by wine code */
NULL,
/* Key names */
(VSC_LPWSTR *)key_names,
(VSC_LPWSTR *)extended_key_names,
NULL, /* Dead key names */
/* scan code to virtual key maps */
scancode_to_vk,
sizeof(scancode_to_vk) / sizeof(scancode_to_vk[0]),
extcode0_to_vk,
extcode1_to_vk,
MAKELONG(0,1), /* Version 1.0 */
/* Ligatures -- Hungarian doesn't have any */
0,
0,
NULL
};
PKBDTABLES WINAPI KbdLayerDescriptor(VOID) {
return &keyboard_layout_table;
}
开发者ID:HBelusca， 项目名称:NasuTek-Odyssey， 代码行数:28， 代码来源:kbdhu.c
六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期
阅读：18225| 2023-10-27
今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知
阅读：9662| 2022-11-06
今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道
阅读：8174| 2022-11-06
今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要
阅读：8544| 2022-11-06
我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多
阅读：8451| 2022-11-06
今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不
阅读：9376| 2022-11-06
电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很
阅读：8421| 2022-11-06
我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法
阅读：7855| 2022-11-06
今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win
阅读：8406| 2022-11-06
今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎
阅读：7393| 2022-11-06
客服电话
APP下载
官方微信
请发表评论