C++ MALI_DEBUG_PRINT函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MALI_DEBUG_PRINT函数的典型用法代码示例。如果您正苦于以下问题：C++ MALI_DEBUG_PRINT函数的具体用法？C++ MALI_DEBUG_PRINT怎么用？C++ MALI_DEBUG_PRINT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MALI_DEBUG_PRINT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: mali_regulator_set_voltage

void mali_regulator_set_voltage(int min_uV, int max_uV)
{
	int voltage;
#if !MALI_DVFS_ENABLED
	min_uV = mali_gpu_vol;
	max_uV = mali_gpu_vol;
#endif
/*
#if MALI_VOLTAGE_LOCK
	if (mali_vol_lock_flag == MALI_FALSE) {
		if (min_uV < MALI_BOTTOMLOCK_VOL || max_uV < MALI_BOTTOMLOCK_VOL) {
			min_uV = MALI_BOTTOMLOCK_VOL;
			max_uV = MALI_BOTTOMLOCK_VOL;
		}
	} else if (_mali_osk_atomic_read(&voltage_lock_status) > 0 ) {
		if (min_uV < mali_lock_vol || max_uV < mali_lock_vol) {
#if MALI_DVFS_ENABLED
			int mali_vol_get;
			mali_vol_get = mali_vol_get_from_table(mali_lock_vol);
			if (mali_vol_get) {
				min_uV = mali_vol_get;
				max_uV = mali_vol_get;
			}
#else
			min_uV = mali_lock_vol;
			max_uV = mali_lock_vol;
#endif
		}
	}
#endif
*/

	_mali_osk_lock_wait(mali_dvfs_lock, _MALI_OSK_LOCKMODE_RW);

	if( IS_ERR_OR_NULL(g3d_regulator) )
	{
		MALI_DEBUG_PRINT(1, ("error on mali_regulator_set_voltage : g3d_regulator is null\n"));
		return;
	}

    MALI_DEBUG_PRINT(2, ("= regulator_set_voltage: %d, %d \n",min_uV, max_uV));

#if MALI_TIMELINE_PROFILING_ENABLED
    _mali_profiling_add_event( MALI_PROFILING_EVENT_TYPE_SINGLE |
                               MALI_PROFILING_EVENT_CHANNEL_SOFTWARE |
                               MALI_PROFILING_EVENT_REASON_SINGLE_SW_GPU_VOLTS,
                               min_uV, max_uV, 1, 0, 0);
#endif

    regulator_set_voltage(g3d_regulator,min_uV,max_uV);
	voltage = regulator_get_voltage(g3d_regulator);

#if MALI_TIMELINE_PROFILING_ENABLED
    _mali_profiling_add_event( MALI_PROFILING_EVENT_TYPE_SINGLE |
                               MALI_PROFILING_EVENT_CHANNEL_SOFTWARE |
                               MALI_PROFILING_EVENT_REASON_SINGLE_SW_GPU_VOLTS,
                               voltage, 0, 2, 0, 0);
#endif

	mali_gpu_vol = voltage;
	MALI_DEBUG_PRINT(1, ("= regulator_get_voltage: %d \n",mali_gpu_vol));

	_mali_osk_lock_signal(mali_dvfs_lock, _MALI_OSK_LOCKMODE_RW);
}

开发者ID:gokussjx，项目名称:Googy-Max-Kernel，代码行数:64，代码来源:mali_platform.c

示例2: mali_dvfs_work_handler

static void mali_dvfs_work_handler(struct work_struct *w)
{
	int change_clk = 0;
	int change_step = 0;
	bMaliDvfsRun=1;

	/* dvfs table change when clock was changed */
	if (step0_clk != mali_dvfs[0].clock) {
		MALI_PRINT(("::: step0_clk change to %d Mhz\n", step0_clk));
		change_clk = step0_clk;
		change_step = 0;
		step0_clk = change_dvfs_tableset(change_clk, change_step);
	}
#if (MALI_DVFS_STEPS > 1)
	if (step1_clk != mali_dvfs[1].clock) {
		MALI_PRINT(("::: step1_clk change to %d Mhz\n", step1_clk));
		change_clk = step1_clk;
		change_step = 1;
		step1_clk = change_dvfs_tableset(change_clk, change_step);
	}
	if (step0_up != mali_dvfs_threshold[0].upthreshold) {
		MALI_PRINT(("::: step0_up change to %d %\n", step0_up));
		mali_dvfs_threshold[0].upthreshold = step0_up;
	}
	if (step1_down != mali_dvfs_threshold[1].downthreshold) {
		MALI_PRINT((":::step1_down change to %d %\n", step1_down));
		mali_dvfs_threshold[1].downthreshold = step1_down;
	}
#if (MALI_DVFS_STEPS > 2)
	if (step2_clk != mali_dvfs[2].clock) {
		MALI_PRINT(("::: step2_clk change to %d Mhz\n", step2_clk));
		change_clk = step2_clk;
		change_step = 2;
		step2_clk = change_dvfs_tableset(change_clk, change_step);
	}
	if (step1_up != mali_dvfs_threshold[1].upthreshold) {
		MALI_PRINT((":::step1_up change to %d %\n", step1_up));
		mali_dvfs_threshold[1].upthreshold = step1_up;
	}
	if (step2_down != mali_dvfs_threshold[2].downthreshold) {
		MALI_PRINT((":::step2_down change to %d %\n", step2_down));
		mali_dvfs_threshold[2].downthreshold = step2_down;
	}
#if (MALI_DVFS_STEPS > 3)
	if (step3_clk != mali_dvfs[3].clock) {
		MALI_PRINT(("::: step3_clk change to %d Mhz\n", step3_clk));
		change_clk = step3_clk;
		change_step = 3;
		step3_clk = change_dvfs_tableset(change_clk, change_step);
	}
	if (step2_up != mali_dvfs_threshold[2].upthreshold) {
		MALI_PRINT((":::step2_up change to %d %\n", step2_up));
		mali_dvfs_threshold[2].upthreshold = step2_up;
	}
	if (step3_down != mali_dvfs_threshold[3].downthreshold) {
		MALI_PRINT((":::step3_down change to %d %\n", step3_down));
		mali_dvfs_threshold[3].downthreshold = step3_down;
	}
#if (MALI_DVFS_STEPS > 4)
	if (step4_clk != mali_dvfs[4].clock) {
		MALI_PRINT(("::: step4_clk change to %d Mhz\n", step4_clk));
		change_clk = step4_clk;
		change_step = 4;
		step4_clk = change_dvfs_tableset(change_clk, change_step);
	}
	if (step3_up != mali_dvfs_threshold[3].upthreshold) {
		MALI_PRINT((":::step3_up change to %d %\n", step3_up));
		mali_dvfs_threshold[3].upthreshold = step3_up;
	}
	if (step4_down != mali_dvfs_threshold[4].downthreshold) {
		MALI_PRINT((":::step4_down change to %d %\n", step4_down));
		mali_dvfs_threshold[4].downthreshold = step4_down;
	}
#endif
#endif
#endif
#endif


#ifdef DEBUG
	mali_dvfs[0].vol = step0_vol;
	mali_dvfs[1].vol = step1_vol;
	mali_dvfs[2].vol = step2_vol;
	mali_dvfs[3].vol = step3_vol;
	mali_dvfs[4].vol = step4_vol;
#endif
	MALI_DEBUG_PRINT(3, ("=== mali_dvfs_work_handler\n"));

	if (!mali_dvfs_status(mali_dvfs_utilization))
		MALI_DEBUG_PRINT(1,( "error on mali dvfs status in mali_dvfs_work_handler"));

	bMaliDvfsRun=0;
}

开发者ID:aatjitra，项目名称:PR26，代码行数:93，代码来源:mali_platform_dvfs.c

示例3: mali_allocation_engine_allocate_memory

_mali_osk_errcode_t mali_allocation_engine_allocate_memory(mali_allocation_engine mem_engine, mali_memory_allocation * descriptor, mali_physical_memory_allocator * physical_allocators, _mali_osk_list_t *tracking_list )
{
	memory_engine * engine = (memory_engine*)mem_engine;

	MALI_DEBUG_ASSERT_POINTER(engine);
	MALI_DEBUG_ASSERT_POINTER(descriptor);
	MALI_DEBUG_ASSERT_POINTER(physical_allocators);
	/* ASSERT that the list member has been initialized, even if it won't be
	 * used for tracking. We need it to be initialized to see if we need to
	 * delete it from a list in the release function. */
	MALI_DEBUG_ASSERT( NULL != descriptor->list.next && NULL != descriptor->list.prev );

	if (_MALI_OSK_ERR_OK == engine->mali_address->allocate(descriptor))
	{
		_mali_osk_errcode_t res = _MALI_OSK_ERR_OK;
		if ( descriptor->flags & MALI_MEMORY_ALLOCATION_FLAG_MAP_INTO_USERSPACE )
		{
			res = engine->process_address->allocate(descriptor);
		}
		if ( _MALI_OSK_ERR_OK == res )
		{
			/* address space setup OK, commit physical memory to the allocation */
			mali_physical_memory_allocator * active_allocator = physical_allocators;
			struct mali_physical_memory_allocation * active_allocation_tracker = &descriptor->physical_allocation;
			u32 offset = 0;

			while ( NULL != active_allocator )
			{
				switch (active_allocator->allocate(active_allocator->ctx, mem_engine, descriptor, &offset, active_allocation_tracker))
				{
					case MALI_MEM_ALLOC_FINISHED:
						if ( NULL != tracking_list )
						{
							/* Insert into the memory session list */
							/* ASSERT that it is not already part of a list */
							MALI_DEBUG_ASSERT( _mali_osk_list_empty( &descriptor->list ) );
							_mali_osk_list_add( &descriptor->list, tracking_list );
						}

						MALI_SUCCESS; /* all done */
					case MALI_MEM_ALLOC_NONE:
						/* reuse current active_allocation_tracker */
						MALI_DEBUG_PRINT( 4, ("Memory Engine Allocate: No allocation on %s, resorting to %s\n",
											  ( active_allocator->name ) ? active_allocator->name : "UNNAMED",
											  ( active_allocator->next ) ? (( active_allocator->next->name )? active_allocator->next->name : "UNNAMED") : "NONE") );
						active_allocator = active_allocator->next;
						break;
					case MALI_MEM_ALLOC_PARTIAL:
						if (NULL != active_allocator->next)
						{
							/* need a new allocation tracker */
							active_allocation_tracker->next = _mali_osk_calloc(1, sizeof(mali_physical_memory_allocation));
							if (NULL != active_allocation_tracker->next)
							{
								active_allocation_tracker = active_allocation_tracker->next;
								MALI_DEBUG_PRINT( 2, ("Memory Engine Allocate: Partial allocation on %s, resorting to %s\n",
													  ( active_allocator->name ) ? active_allocator->name : "UNNAMED",
													  ( active_allocator->next ) ? (( active_allocator->next->name )? active_allocator->next->name : "UNNAMED") : "NONE") );
								active_allocator = active_allocator->next;
								break;
							}
						}
					   /* FALL THROUGH */
					case MALI_MEM_ALLOC_INTERNAL_FAILURE:
					   active_allocator = NULL; /* end the while loop */
					   break;
				}
			}

			MALI_PRINT(("Memory allocate failed, could not allocate size %d kB.\n", descriptor->size/1024));

			/* allocation failure, start cleanup */
			/* loop over any potential partial allocations */
			active_allocation_tracker = &descriptor->physical_allocation;
			while (NULL != active_allocation_tracker)
			{
				/* handle blank trackers which will show up during failure */
				if (NULL != active_allocation_tracker->release)
				{
					active_allocation_tracker->release(active_allocation_tracker->ctx, active_allocation_tracker->handle);
				}
				active_allocation_tracker = active_allocation_tracker->next;
			}

			/* free the allocation tracker objects themselves, skipping the tracker stored inside the descriptor itself */
			for ( active_allocation_tracker = descriptor->physical_allocation.next; active_allocation_tracker != NULL; )
			{
				void * buf = active_allocation_tracker;
				active_allocation_tracker = active_allocation_tracker->next;
				_mali_osk_free(buf);
			}

			/* release the address spaces */

			if ( descriptor->flags & MALI_MEMORY_ALLOCATION_FLAG_MAP_INTO_USERSPACE )
			{
				engine->process_address->release(descriptor);
			}
		}
		engine->mali_address->release(descriptor);
//.........这里部分代码省略.........

开发者ID:Andro-Boy，项目名称:Googy-Max2-Kernel，代码行数:101，代码来源:mali_kernel_memory_engine.c

示例4: mali_platform_device_register

int mali_platform_device_register(void)
{
	int err = -1;
#if defined(CONFIG_ARCH_REALVIEW)
	u32 m400_gp_version;
#endif

	MALI_DEBUG_PRINT(4, ("mali_platform_device_register() called\n"));

	/* Detect present Mali GPU and connect the correct resources to the device */
#if defined(CONFIG_ARCH_VEXPRESS)

	if (mali_read_phys(0xFC020000) == 0x00010100)
	{
		MALI_DEBUG_PRINT(4, ("Registering Mali-450 MP8 device\n"));
		err = platform_device_add_resources(&mali_gpu_device, mali_gpu_resources_m450_mp8, sizeof(mali_gpu_resources_m450_mp8) / sizeof(mali_gpu_resources_m450_mp8[0]));
	}

#elif defined(CONFIG_ARCH_REALVIEW)

	m400_gp_version = mali_read_phys(0xC000006C);
	if (m400_gp_version == 0x00000000 && (mali_read_phys(0xC000206c) & 0xFFFF0000) == 0x0A070000)
	{
		MALI_DEBUG_PRINT(4, ("Registering Mali-200 device\n"));
		err = platform_device_add_resources(&mali_gpu_device, mali_gpu_resources_m200, sizeof(mali_gpu_resources_m200) / sizeof(mali_gpu_resources_m200[0]));
		mali_write_phys(0xC0010020, 0xA); /* Enable direct memory mapping for FPGA */
	}
	else if ((m400_gp_version & 0xFFFF0000) == 0x0C070000)
	{
		MALI_DEBUG_PRINT(4, ("Registering Mali-300 device\n"));
		err = platform_device_add_resources(&mali_gpu_device, mali_gpu_resources_m300, sizeof(mali_gpu_resources_m300) / sizeof(mali_gpu_resources_m300[0]));
		mali_write_phys(0xC0010020, 0xA); /* Enable direct memory mapping for FPGA */
	}
	else if ((m400_gp_version & 0xFFFF0000) == 0x0B070000)
	{
		u32 fpga_fw_version = mali_read_phys(0xC0010000);
		if (fpga_fw_version == 0x130C008F || fpga_fw_version == 0x110C008F)
		{
			/* Mali-400 MP1 r1p0 or r1p1 */
			MALI_DEBUG_PRINT(4, ("Registering Mali-400 MP1 device\n"));
			err = platform_device_add_resources(&mali_gpu_device, mali_gpu_resources_m400_mp1, sizeof(mali_gpu_resources_m400_mp1) / sizeof(mali_gpu_resources_m400_mp1[0]));
			mali_write_phys(0xC0010020, 0xA); /* Enable direct memory mapping for FPGA */
		}
		else if (fpga_fw_version == 0x130C000F)
		{
			/* Mali-400 MP2 r1p1 */
			MALI_DEBUG_PRINT(4, ("Registering Mali-400 MP2 device\n"));
			err = platform_device_add_resources(&mali_gpu_device, mali_gpu_resources_m400_mp2, sizeof(mali_gpu_resources_m400_mp2) / sizeof(mali_gpu_resources_m400_mp2[0]));
			mali_write_phys(0xC0010020, 0xA); /* Enable direct memory mapping for FPGA */
		}
	}

#endif

	if (0 == err)
	{
		err = platform_device_add_data(&mali_gpu_device, &mali_gpu_data, sizeof(mali_gpu_data));
		if (0 == err)
		{
			/* Register the platform device */
			err = platform_device_register(&mali_gpu_device);
			if (0 == err)
			{
#ifdef CONFIG_PM_RUNTIME
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
				pm_runtime_set_autosuspend_delay(&(mali_gpu_device.dev), 1000);
				pm_runtime_use_autosuspend(&(mali_gpu_device.dev));
#endif
				pm_runtime_enable(&(mali_gpu_device.dev));
#endif

				return 0;
			}
		}

		platform_device_unregister(&mali_gpu_device);
	}

	return err;
}

开发者ID:ColinIanKing，项目名称:m576，代码行数:80，代码来源:arm.c

示例5: mali_pp_job_start

void mali_pp_job_start(struct mali_pp_core *core, struct mali_pp_job *job, u32 sub_job, mali_bool restart_virtual)
{
	u32 relative_address;
	u32 start_index;
	u32 nr_of_regs;
	u32 *frame_registers = mali_pp_job_get_frame_registers(job);
	u32 *wb0_registers = mali_pp_job_get_wb0_registers(job);
	u32 *wb1_registers = mali_pp_job_get_wb1_registers(job);
	u32 *wb2_registers = mali_pp_job_get_wb2_registers(job);
	u32 counter_src0 = mali_pp_job_get_perf_counter_src0(job, sub_job);
	u32 counter_src1 = mali_pp_job_get_perf_counter_src1(job, sub_job);

	MALI_DEBUG_ASSERT_POINTER(core);

	/* Write frame registers */

	/*
	 * There are two frame registers which are different for each sub job:
	 * 1. The Renderer List Address Register (MALI200_REG_ADDR_FRAME)
	 * 2. The FS Stack Address Register (MALI200_REG_ADDR_STACK)
	 */
	mali_hw_core_register_write_relaxed_conditional(&core->hw_core, MALI200_REG_ADDR_FRAME, mali_pp_job_get_addr_frame(job, sub_job), mali_frame_registers_reset_values[MALI200_REG_ADDR_FRAME / sizeof(u32)]);

	/* For virtual jobs, the stack address shouldn't be broadcast but written individually */
	if (!mali_pp_job_is_virtual(job) || restart_virtual) {
		mali_hw_core_register_write_relaxed_conditional(&core->hw_core, MALI200_REG_ADDR_STACK, mali_pp_job_get_addr_stack(job, sub_job), mali_frame_registers_reset_values[MALI200_REG_ADDR_STACK / sizeof(u32)]);
	}

	/* Write registers between MALI200_REG_ADDR_FRAME and MALI200_REG_ADDR_STACK */
	relative_address = MALI200_REG_ADDR_RSW;
	start_index = MALI200_REG_ADDR_RSW / sizeof(u32);
	nr_of_regs = (MALI200_REG_ADDR_STACK - MALI200_REG_ADDR_RSW) / sizeof(u32);

	mali_hw_core_register_write_array_relaxed_conditional(&core->hw_core,
	        relative_address, &frame_registers[start_index],
	        nr_of_regs, &mali_frame_registers_reset_values[start_index]);

	/* MALI200_REG_ADDR_STACK_SIZE */
	relative_address = MALI200_REG_ADDR_STACK_SIZE;
	start_index = MALI200_REG_ADDR_STACK_SIZE / sizeof(u32);

	mali_hw_core_register_write_relaxed_conditional(&core->hw_core,
	        relative_address, frame_registers[start_index],
	        mali_frame_registers_reset_values[start_index]);

	/* Skip 2 reserved registers */

	/* Write remaining registers */
	relative_address = MALI200_REG_ADDR_ORIGIN_OFFSET_X;
	start_index = MALI200_REG_ADDR_ORIGIN_OFFSET_X / sizeof(u32);
	nr_of_regs = MALI_PP_MALI400_NUM_FRAME_REGISTERS - MALI200_REG_ADDR_ORIGIN_OFFSET_X / sizeof(u32);

	mali_hw_core_register_write_array_relaxed_conditional(&core->hw_core,
	        relative_address, &frame_registers[start_index],
	        nr_of_regs, &mali_frame_registers_reset_values[start_index]);

	/* Write WBx registers */
	if (wb0_registers[0]) { /* M200_WB0_REG_SOURCE_SELECT register */
		mali_hw_core_register_write_array_relaxed_conditional(&core->hw_core, MALI200_REG_ADDR_WB0, wb0_registers, _MALI_PP_MAX_WB_REGISTERS, mali_wb_registers_reset_values);
	}

	if (wb1_registers[0]) { /* M200_WB1_REG_SOURCE_SELECT register */
		mali_hw_core_register_write_array_relaxed_conditional(&core->hw_core, MALI200_REG_ADDR_WB1, wb1_registers, _MALI_PP_MAX_WB_REGISTERS, mali_wb_registers_reset_values);
	}

	if (wb2_registers[0]) { /* M200_WB2_REG_SOURCE_SELECT register */
		mali_hw_core_register_write_array_relaxed_conditional(&core->hw_core, MALI200_REG_ADDR_WB2, wb2_registers, _MALI_PP_MAX_WB_REGISTERS, mali_wb_registers_reset_values);
	}

	if (MALI_HW_CORE_NO_COUNTER != counter_src0) {
		mali_hw_core_register_write_relaxed(&core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_0_SRC, counter_src0);
		mali_hw_core_register_write_relaxed_conditional(&core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_0_ENABLE, MALI200_REG_VAL_PERF_CNT_ENABLE, mali_perf_cnt_enable_reset_value);
	}
	if (MALI_HW_CORE_NO_COUNTER != counter_src1) {
		mali_hw_core_register_write_relaxed(&core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_1_SRC, counter_src1);
		mali_hw_core_register_write_relaxed_conditional(&core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_1_ENABLE, MALI200_REG_VAL_PERF_CNT_ENABLE, mali_perf_cnt_enable_reset_value);
	}

#ifdef CONFIG_MALI400_HEATMAPS_ENABLED
	if(job->uargs.perf_counter_flag & _MALI_PERFORMANCE_COUNTER_FLAG_HEATMAP_ENABLE) {
		mali_hw_core_register_write_relaxed(&core->hw_core, MALI200_REG_ADDR_MGMT_PERFMON_CONTR, ((job->uargs.tilesx & 0x3FF) << 16) | 1);
		mali_hw_core_register_write_relaxed(&core->hw_core,  MALI200_REG_ADDR_MGMT_PERFMON_BASE, job->uargs.heatmap_mem & 0xFFFFFFF8);
	}
#endif /* CONFIG_MALI400_HEATMAPS_ENABLED */

	MALI_DEBUG_PRINT(3, ("Mali PP: Starting job 0x%08X part %u/%u on PP core %s\n", job, sub_job + 1, mali_pp_job_get_sub_job_count(job), core->hw_core.description));

	/* Adding barrier to make sure all rester writes are finished */
	_mali_osk_write_mem_barrier();

	/* This is the command that starts the core. */
	mali_hw_core_register_write_relaxed(&core->hw_core, MALI200_REG_ADDR_MGMT_CTRL_MGMT, MALI200_REG_VAL_CTRL_MGMT_START_RENDERING);

	/* Adding barrier to make sure previous rester writes is finished */
	_mali_osk_write_mem_barrier();
}

开发者ID:CobraJet93，项目名称:kernel-3.10.54，代码行数:96，代码来源:mali_pp.c

示例6: mali_pp_print_state

void mali_pp_print_state(struct mali_pp_core *core)
{
	MALI_DEBUG_PRINT(2, ("Mali PP: State: 0x%08x\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_STATUS) ));
}

开发者ID:CobraJet93，项目名称:kernel-3.10.54，代码行数:4，代码来源:mali_pp.c

示例7: _mali_osk_wait_queue_wait_event

void _mali_osk_wait_queue_wait_event( _mali_osk_wait_queue_t *queue, mali_bool (*condition)(void) )
{
    MALI_DEBUG_ASSERT_POINTER( queue );
    MALI_DEBUG_PRINT(6, ("Adding to wait queue %p\n", queue));
    wait_event(queue->wait_queue, condition());
}

开发者ID:AndreiLux，项目名称:Perseus-S3，代码行数:6，代码来源:mali_osk_wait_queue.c

示例8: mali_mmu_print_state

void mali_mmu_print_state(struct mali_mmu_core *mmu)
{
	MALI_DEBUG_PRINT(2, ("MMU: State of %s is 0x%08x\n", mmu->hw_core.description, mali_hw_core_register_read(&mmu->hw_core, MALI_MMU_REGISTER_STATUS)));
}

开发者ID:SeKwonLee，项目名称:Hongik_NECSST_Tizen2.2_kernel，代码行数:4，代码来源:mali_mmu.c

示例9: MALI_DEBUG_PRINT

struct mali_l2_cache_core *mali_l2_cache_create(_mali_osk_resource_t *resource)
{
	struct mali_l2_cache_core *cache = NULL;

	MALI_DEBUG_PRINT(2, ("Mali L2 cache: Creating Mali L2 cache: %s\n", resource->description));

	if (mali_global_num_l2_cache_cores >= MALI_MAX_NUMBER_OF_L2_CACHE_CORES)
	{
		MALI_PRINT_ERROR(("Mali L2 cache: Too many L2 cache core objects created\n"));
		return NULL;
	}

	cache = _mali_osk_malloc(sizeof(struct mali_l2_cache_core));
	if (NULL != cache)
	{
		cache->core_id =  mali_global_num_l2_cache_cores;
		cache->counter_src0 = MALI_HW_CORE_NO_COUNTER;
		cache->counter_src1 = MALI_HW_CORE_NO_COUNTER;
		if (_MALI_OSK_ERR_OK == mali_hw_core_create(&cache->hw_core, resource, MALI400_L2_CACHE_REGISTERS_SIZE))
		{
			cache->command_lock = _mali_osk_lock_init(_MALI_OSK_LOCKFLAG_ORDERED | _MALI_OSK_LOCKFLAG_SPINLOCK | _MALI_OSK_LOCKFLAG_NONINTERRUPTABLE,
			                                          0, _MALI_OSK_LOCK_ORDER_L2_COMMAND);
			if (NULL != cache->command_lock)
			{
				cache->counter_lock = _mali_osk_lock_init(_MALI_OSK_LOCKFLAG_ORDERED | _MALI_OSK_LOCKFLAG_SPINLOCK | _MALI_OSK_LOCKFLAG_NONINTERRUPTABLE,
				                                          0, _MALI_OSK_LOCK_ORDER_L2_COUNTER);
				if (NULL != cache->counter_lock)
				{
					if (_MALI_OSK_ERR_OK == mali_l2_cache_reset(cache))
					{
						mali_global_l2_cache_cores[mali_global_num_l2_cache_cores] = cache;
						mali_global_num_l2_cache_cores++;

						return cache;
					}
					else
					{
						MALI_PRINT_ERROR(("Mali L2 cache: Failed to reset L2 cache core %s\n", cache->hw_core.description));
					}

					_mali_osk_lock_term(cache->counter_lock);
				}
				else
				{
					MALI_PRINT_ERROR(("Mali L2 cache: Failed to create counter lock for L2 cache core %s\n", cache->hw_core.description));
				}

				_mali_osk_lock_term(cache->command_lock);
			}
			else
			{
				MALI_PRINT_ERROR(("Mali L2 cache: Failed to create command lock for L2 cache core %s\n", cache->hw_core.description));
			}

			mali_hw_core_delete(&cache->hw_core);
		}

		_mali_osk_free(cache);
	}
	else
	{
		MALI_PRINT_ERROR(("Mali L2 cache: Failed to allocate memory for L2 cache core\n"));
	}

	return NULL;
}

开发者ID:791254467，项目名称:u8500_kernel，代码行数:66，代码来源:mali_l2_cache.c

示例10: init_mali_clock

static mali_bool init_mali_clock(void)
{
	mali_bool ret = MALI_TRUE;

	gpu_power_state = 0;

	if (mali_clock != 0)
		return ret; // already initialized

	mali_dvfs_lock = _mali_osk_lock_init(_MALI_OSK_LOCKFLAG_NONINTERRUPTABLE
			| _MALI_OSK_LOCKFLAG_ONELOCK, 0, 0);
	if (mali_dvfs_lock == NULL)
		return _MALI_OSK_ERR_FAULT;

	if (mali_clk_set_rate(mali_gpu_clk, GPU_MHZ) == MALI_FALSE)
	{
		ret = MALI_FALSE;
		goto err_clock_get;
	}

	MALI_PRINT(("init_mali_clock mali_clock %p \n", mali_clock));


#ifdef CONFIG_REGULATOR
#if USING_MALI_PMM
	g3d_regulator = regulator_get(&mali_gpu_device.dev, "vdd_g3d");
#else
	g3d_regulator = regulator_get(NULL, "vdd_g3d");
#endif

	if (IS_ERR(g3d_regulator))
	{
		MALI_PRINT( ("MALI Error : failed to get vdd_g3d\n"));
		ret = MALI_FALSE;
		goto err_regulator;
	}

	regulator_enable(g3d_regulator);

	MALI_DEBUG_PRINT(1, ("= regulator_enable -> use cnt: %d \n",mali_regulator_get_usecount()));
	mali_regulator_set_voltage(mali_gpu_vol, mali_gpu_vol);
#endif

	MALI_DEBUG_PRINT(2, ("MALI Clock is set at mali driver\n"));


	MALI_DEBUG_PRINT(3,("::clk_put:: %s mali_parent_clock - normal\n", __FUNCTION__));
	MALI_DEBUG_PRINT(3,("::clk_put:: %s mpll_clock  - normal\n", __FUNCTION__));

	mali_clk_put(MALI_FALSE);

	return MALI_TRUE;


#ifdef CONFIG_REGULATOR
err_regulator:
	regulator_put(g3d_regulator);
#endif

err_clock_get:
	mali_clk_put(MALI_TRUE);

	return ret;
}

开发者ID:gokussjx，项目名称:Googy-Max-Kernel，代码行数:64，代码来源:mali_platform.c

示例11: mali_clk_set_rate

mali_bool mali_clk_set_rate(unsigned int clk, unsigned int mhz)
{
	unsigned long rate = 0;
	mali_bool bis_vpll = MALI_TRUE;

#ifndef CONFIG_VPLL_USE_FOR_TVENC
	bis_vpll = MALI_TRUE;
#endif

#if !MALI_DVFS_ENABLED
	clk = mali_gpu_clk;
#endif

	_mali_osk_lock_wait(mali_dvfs_lock, _MALI_OSK_LOCKMODE_RW);

	if (mali_clk_get(bis_vpll) == MALI_FALSE)
		return MALI_FALSE;

	rate = (unsigned long)clk * (unsigned long)mhz;
	MALI_DEBUG_PRINT(3,("= clk_set_rate : %d , %d \n",clk, mhz ));

	if (bis_vpll)
	{
		clk_set_rate(fout_vpll_clock, (unsigned int)clk * GPU_MHZ);
		clk_set_parent(vpll_src_clock, ext_xtal_clock);
		clk_set_parent(sclk_vpll_clock, fout_vpll_clock);

		clk_set_parent(mali_parent_clock, sclk_vpll_clock);
		clk_set_parent(mali_clock, mali_parent_clock);
	}
	else
	{
		clk_set_parent(mali_parent_clock, mpll_clock);
		clk_set_parent(mali_clock, mali_parent_clock);
	}

	if (clk_enable(mali_clock) < 0)
		return MALI_FALSE;

#if MALI_TIMELINE_PROFILING_ENABLED
    _mali_profiling_add_event( MALI_PROFILING_EVENT_TYPE_SINGLE |
                               MALI_PROFILING_EVENT_CHANNEL_SOFTWARE |
                               MALI_PROFILING_EVENT_REASON_SINGLE_SW_GPU_FREQ,
                               rate, 0, 0, 0, 0);
#endif

	clk_set_rate(mali_clock, rate);
	rate = clk_get_rate(mali_clock);

#if MALI_TIMELINE_PROFILING_ENABLED
    _mali_profiling_add_event( MALI_PROFILING_EVENT_TYPE_SINGLE |
                               MALI_PROFILING_EVENT_CHANNEL_SOFTWARE |
                               MALI_PROFILING_EVENT_REASON_SINGLE_SW_GPU_FREQ,
                               rate, 1, 0, 0, 0);
#endif

	if (bis_vpll)
		mali_gpu_clk = (int)(rate / mhz);
	else
		mali_gpu_clk = (int)((rate + 500000) / mhz);

	GPU_MHZ = mhz;
	MALI_DEBUG_PRINT(3,("= clk_get_rate: %d \n",mali_gpu_clk));

	mali_clk_put(MALI_FALSE);

	_mali_osk_lock_signal(mali_dvfs_lock, _MALI_OSK_LOCKMODE_RW);

	return MALI_TRUE;
}

开发者ID:gokussjx，项目名称:Googy-Max-Kernel，代码行数:70，代码来源:mali_platform.c

示例12: mali_ioctl

static int mali_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
#endif
{
	int err;
	struct mali_session_data *session_data;

#ifndef HAVE_UNLOCKED_IOCTL
	/* inode not used */
	(void)inode;
#endif

	MALI_DEBUG_PRINT(7, ("Ioctl received 0x%08X 0x%08lX\n", cmd, arg));

	session_data = (struct mali_session_data *)filp->private_data;
	if (NULL == session_data)
	{
		MALI_DEBUG_PRINT(7, ("filp->private_data was NULL\n"));
		return -ENOTTY;
	}

	if (NULL == (void *)arg)
	{
		MALI_DEBUG_PRINT(7, ("arg was NULL\n"));
		return -ENOTTY;
	}

	switch(cmd)
	{
		case MALI_IOC_WAIT_FOR_NOTIFICATION:
			err = wait_for_notification_wrapper(session_data, (_mali_uk_wait_for_notification_s __user *)arg);
			break;

		case MALI_IOC_GET_API_VERSION:
			err = get_api_version_wrapper(session_data, (_mali_uk_get_api_version_s __user *)arg);
			break;

		case MALI_IOC_POST_NOTIFICATION:
			err = post_notification_wrapper(session_data, (_mali_uk_post_notification_s __user *)arg);
			break;

		case MALI_IOC_GET_USER_SETTINGS:
			err = get_user_settings_wrapper(session_data, (_mali_uk_get_user_settings_s __user *)arg);
			break;

#if MALI_TIMELINE_PROFILING_ENABLED
		case MALI_IOC_PROFILING_START:
			err = profiling_start_wrapper(session_data, (_mali_uk_profiling_start_s __user *)arg);
			break;

		case MALI_IOC_PROFILING_ADD_EVENT:
			err = profiling_add_event_wrapper(session_data, (_mali_uk_profiling_add_event_s __user *)arg);
			break;

		case MALI_IOC_PROFILING_STOP:
			err = profiling_stop_wrapper(session_data, (_mali_uk_profiling_stop_s __user *)arg);
			break;

		case MALI_IOC_PROFILING_GET_EVENT:
			err = profiling_get_event_wrapper(session_data, (_mali_uk_profiling_get_event_s __user *)arg);
			break;

		case MALI_IOC_PROFILING_CLEAR:
			err = profiling_clear_wrapper(session_data, (_mali_uk_profiling_clear_s __user *)arg);
			break;

		case MALI_IOC_PROFILING_GET_CONFIG:
			/* Deprecated: still compatible with get_user_settings */
			err = get_user_settings_wrapper(session_data, (_mali_uk_get_user_settings_s __user *)arg);
			break;

		case MALI_IOC_PROFILING_REPORT_SW_COUNTERS:
			err = profiling_report_sw_counters_wrapper(session_data, (_mali_uk_sw_counters_report_s __user *)arg);
			break;

#else

		case MALI_IOC_PROFILING_START:              /* FALL-THROUGH */
		case MALI_IOC_PROFILING_ADD_EVENT:          /* FALL-THROUGH */
		case MALI_IOC_PROFILING_STOP:               /* FALL-THROUGH */
		case MALI_IOC_PROFILING_GET_EVENT:          /* FALL-THROUGH */
		case MALI_IOC_PROFILING_CLEAR:              /* FALL-THROUGH */
		case MALI_IOC_PROFILING_GET_CONFIG:         /* FALL-THROUGH */
		case MALI_IOC_PROFILING_REPORT_SW_COUNTERS: /* FALL-THROUGH */
			MALI_DEBUG_PRINT(2, ("Profiling not supported\n"));
			err = -ENOTTY;
			break;

#endif

		case MALI_IOC_MEM_INIT:
			err = mem_init_wrapper(session_data, (_mali_uk_init_mem_s __user *)arg);
			break;

		case MALI_IOC_MEM_TERM:
			err = mem_term_wrapper(session_data, (_mali_uk_term_mem_s __user *)arg);
			break;

		case MALI_IOC_MEM_MAP_EXT:
			err = mem_map_ext_wrapper(session_data, (_mali_uk_map_external_mem_s __user *)arg);
			break;
//.........这里部分代码省略.........

开发者ID:kijodoari，项目名称:kernel-s2，代码行数:101，代码来源:mali_kernel_linux.c

示例13: mali_sysfs_register


//.........这里部分代码省略.........
						if (NULL != pp_core)
						{
							char buf[16];
							struct dentry *mali_pp_ppx_dir;
							_mali_osk_snprintf(buf, sizeof(buf), "pp%u", mali_pp_core_get_id(pp_core));
							mali_pp_ppx_dir = debugfs_create_dir(buf, mali_pp_dir);
							if (NULL != mali_pp_ppx_dir)
							{
								debugfs_create_file("counter_src0", 0600, mali_pp_ppx_dir, pp_core, &pp_ppx_counter_src0_fops);
								debugfs_create_file("counter_src1", 0600, mali_pp_ppx_dir, pp_core, &pp_ppx_counter_src1_fops);
							}
						}

						/* try next group */
						gi++;
						group = mali_cluster_get_group(cluster, gi);
					}

					/* try next cluster */
					ci++;
					cluster = mali_cluster_get_global_cluster(ci);
				}
			}

			mali_l2_dir = debugfs_create_dir("l2", mali_debugfs_dir);
			if (mali_l2_dir != NULL)
			{
				struct dentry *mali_l2_all_dir;
				u32 l2_id;
				struct mali_l2_cache_core *l2_cache;

				mali_l2_all_dir = debugfs_create_dir("all", mali_l2_dir);
				if (mali_l2_all_dir != NULL)
				{
					debugfs_create_file("counter_src0", 0400, mali_l2_all_dir, NULL, &l2_all_counter_src0_fops);
					debugfs_create_file("counter_src1", 0400, mali_l2_all_dir, NULL, &l2_all_counter_src1_fops);
				}

				l2_id = 0;
				l2_cache = mali_l2_cache_core_get_glob_l2_core(l2_id);
				while (NULL != l2_cache)
				{
					char buf[16];
					struct dentry *mali_l2_l2x_dir;
					_mali_osk_snprintf(buf, sizeof(buf), "l2%u", l2_id);
					mali_l2_l2x_dir = debugfs_create_dir(buf, mali_l2_dir);
					if (NULL != mali_l2_l2x_dir)
					{
						debugfs_create_file("counter_src0", 0600, mali_l2_l2x_dir, l2_cache, &l2_l2x_counter_src0_fops);
						debugfs_create_file("counter_src1", 0600, mali_l2_l2x_dir, l2_cache, &l2_l2x_counter_src1_fops);
					}
					
					/* try next L2 */
					l2_id++;
					l2_cache = mali_l2_cache_core_get_glob_l2_core(l2_id);
				}
			}

			debugfs_create_file("memory_usage", 0400, mali_debugfs_dir, NULL, &memory_usage_fops);

#if MALI_INTERNAL_TIMELINE_PROFILING_ENABLED
			mali_profiling_dir = debugfs_create_dir("profiling", mali_debugfs_dir);
			if (mali_profiling_dir != NULL)
			{
				struct dentry *mali_profiling_proc_dir = debugfs_create_dir("proc", mali_profiling_dir);
				if (mali_profiling_proc_dir != NULL)
				{
					struct dentry *mali_profiling_proc_default_dir = debugfs_create_dir("default", mali_profiling_proc_dir);
					if (mali_profiling_proc_default_dir != NULL)
					{
						debugfs_create_file("enable", 0600, mali_profiling_proc_default_dir, (void*)_MALI_UK_USER_SETTING_SW_EVENTS_ENABLE, &user_settings_fops);
					}
				}
				debugfs_create_file("record", 0600, mali_profiling_dir, NULL, &profiling_record_fops);
				debugfs_create_file("events", 0400, mali_profiling_dir, NULL, &profiling_events_fops);
			}
#endif

#if MALI_STATE_TRACKING
			debugfs_create_file("state_dump", 0400, mali_debugfs_dir, NULL, &mali_seq_internal_state_fops);
#endif

			if (mali_sysfs_user_settings_register())
			{
				/* Failed to create the debugfs entries for the user settings DB. */
				MALI_DEBUG_PRINT(2, ("Failed to create user setting debugfs files. Ignoring...\n"));
			}
		}
	}

	/* Success! */
	return 0;

	/* Error handling */
init_mdev_err:
	class_destroy(device->mali_class);
init_class_err:

	return err;
}

开发者ID:4yush5663，项目名称:android_kernel_samsung_i9500，代码行数:101，代码来源:mali_kernel_sysfs.c

示例14: MALI_DEBUG_PRINT

struct mali_pp_core *mali_pp_create(const _mali_osk_resource_t *resource, struct mali_group *group, mali_bool is_virtual, u32 bcast_id)
{
	struct mali_pp_core* core = NULL;

	MALI_DEBUG_PRINT(2, ("Mali PP: Creating Mali PP core: %s\n", resource->description));
	MALI_DEBUG_PRINT(2, ("Mali PP: Base address of PP core: 0x%x\n", resource->base));

	if (mali_global_num_pp_cores >= MALI_MAX_NUMBER_OF_PP_CORES) {
		MALI_PRINT_ERROR(("Mali PP: Too many PP core objects created\n"));
		return NULL;
	}

	core = _mali_osk_malloc(sizeof(struct mali_pp_core));
	if (NULL != core) {
		core->core_id = mali_global_num_pp_cores;
		core->bcast_id = bcast_id;

		if (_MALI_OSK_ERR_OK == mali_hw_core_create(&core->hw_core, resource, MALI200_REG_SIZEOF_REGISTER_BANK)) {
			_mali_osk_errcode_t ret;

			if (!is_virtual) {
				ret = mali_pp_reset(core);
			} else {
				ret = _MALI_OSK_ERR_OK;
			}

			if (_MALI_OSK_ERR_OK == ret) {
				ret = mali_group_add_pp_core(group, core);
				if (_MALI_OSK_ERR_OK == ret) {
					/* Setup IRQ handlers (which will do IRQ probing if needed) */
					MALI_DEBUG_ASSERT(!is_virtual || -1 != resource->irq);

					core->irq = _mali_osk_irq_init(resource->irq,
					                               mali_group_upper_half_pp,
					                               group,
					                               mali_pp_irq_probe_trigger,
					                               mali_pp_irq_probe_ack,
					                               core,
					                               resource->description);
					if (NULL != core->irq) {
						mali_global_pp_cores[mali_global_num_pp_cores] = core;
						mali_global_num_pp_cores++;

						return core;
					} else {
						MALI_PRINT_ERROR(("Mali PP: Failed to setup interrupt handlers for PP core %s\n", core->hw_core.description));
					}
					mali_group_remove_pp_core(group);
				} else {
					MALI_PRINT_ERROR(("Mali PP: Failed to add core %s to group\n", core->hw_core.description));
				}
			}
			mali_hw_core_delete(&core->hw_core);
		}

		_mali_osk_free(core);
	} else {
		MALI_PRINT_ERROR(("Mali PP: Failed to allocate memory for PP core\n"));
	}

	return NULL;
}

开发者ID:CobraJet93，项目名称:kernel-3.10.54，代码行数:62，代码来源:mali_pp.c

示例15: block_allocator_allocate

static mali_physical_memory_allocation_result block_allocator_allocate(void* ctx, mali_allocation_engine * engine, mali_memory_allocation * descriptor, u32* offset, mali_physical_memory_allocation * alloc_info)
{
    block_allocator * info;
    u32 left;
    block_info * last_allocated = NULL;
    mali_physical_memory_allocation_result result = MALI_MEM_ALLOC_NONE;
    block_allocator_allocation *ret_allocation;

    MALI_DEBUG_ASSERT_POINTER(ctx);
    MALI_DEBUG_ASSERT_POINTER(descriptor);
    MALI_DEBUG_ASSERT_POINTER(offset);
    MALI_DEBUG_ASSERT_POINTER(alloc_info);

    info = (block_allocator*)ctx;
    left = descriptor->size - *offset;
    MALI_DEBUG_ASSERT(0 != left);

    if (_MALI_OSK_ERR_OK != _mali_osk_lock_wait(info->mutex, _MALI_OSK_LOCKMODE_RW)) return MALI_MEM_ALLOC_INTERNAL_FAILURE;

    ret_allocation = _mali_osk_malloc( sizeof(block_allocator_allocation) );

    if ( NULL == ret_allocation )
    {
        /* Failure; try another allocator by returning MALI_MEM_ALLOC_NONE */
        _mali_osk_lock_signal(info->mutex, _MALI_OSK_LOCKMODE_RW);
        return result;
    }

    ret_allocation->start_offset = *offset;
    ret_allocation->mapping_length = 0;

    while ((left > 0) && (info->first_free))
    {
        block_info * block;
        u32 phys_addr;
        u32 padding;
        u32 current_mapping_size;

        block = info->first_free;
        info->first_free = info->first_free->next;
        block->next = last_allocated;
        last_allocated = block;

        phys_addr = get_phys(info, block);

        padding = *offset & (MALI_BLOCK_SIZE-1);

        if (MALI_BLOCK_SIZE - padding < left)
        {
            current_mapping_size = MALI_BLOCK_SIZE - padding;
        }
        else
        {
            current_mapping_size = left;
        }

        if (_MALI_OSK_ERR_OK != mali_allocation_engine_map_physical(engine, descriptor, *offset, phys_addr + padding, info->cpu_usage_adjust, current_mapping_size))
        {
            MALI_DEBUG_PRINT(1, ("Mapping of physical memory  failed\n"));
            result = MALI_MEM_ALLOC_INTERNAL_FAILURE;
            mali_allocation_engine_unmap_physical(engine, descriptor, ret_allocation->start_offset, ret_allocation->mapping_length, (_mali_osk_mem_mapregion_flags_t)0);

            /* release all memory back to the pool */
            while (last_allocated)
            {
                /* This relinks every block we've just allocated back into the free-list */
                block = last_allocated->next;
                last_allocated->next = info->first_free;
                info->first_free = last_allocated;
                last_allocated = block;
            }

            break;
        }

        *offset += current_mapping_size;
        left -= current_mapping_size;
        ret_allocation->mapping_length += current_mapping_size;
    }

    _mali_osk_lock_signal(info->mutex, _MALI_OSK_LOCKMODE_RW);

    if (last_allocated)
    {
        if (left) result = MALI_MEM_ALLOC_PARTIAL;
        else result = MALI_MEM_ALLOC_FINISHED;

        /* Record all the information about this allocation */
        ret_allocation->last_allocated = last_allocated;
        ret_allocation->engine = engine;
        ret_allocation->descriptor = descriptor;

        alloc_info->ctx = info;
        alloc_info->handle = ret_allocation;
        alloc_info->release = block_allocator_release;
    }
    else
    {
        /* Free the allocation information - nothing to be passed back */
        _mali_osk_free( ret_allocation );
//.........这里部分代码省略.........

开发者ID:vision8520，项目名称:kernel-amlogic-mx，代码行数:101，代码来源:mali_block_allocator.c

示例16: mali_pp_print_registers

static void mali_pp_print_registers(struct mali_pp_core *core)
{
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_VERSION = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_VERSION)));
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_CURRENT_REND_LIST_ADDR = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_CURRENT_REND_LIST_ADDR)));
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_STATUS = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_STATUS)));
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_INT_RAWSTAT = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_INT_RAWSTAT)));
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_INT_MASK = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_INT_MASK)));
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_INT_STATUS = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_INT_STATUS)));
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_BUS_ERROR_STATUS = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_BUS_ERROR_STATUS)));
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_PERF_CNT_0_ENABLE = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_0_ENABLE)));
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_PERF_CNT_0_SRC = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_0_SRC)));
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_PERF_CNT_0_VALUE = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_0_VALUE)));
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_PERF_CNT_1_ENABLE = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_1_ENABLE)));
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_PERF_CNT_1_SRC = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_1_SRC)));
	MALI_DEBUG_PRINT(2, ("Mali PP: Register MALI200_REG_ADDR_MGMT_PERF_CNT_1_VALUE = 0x%08X\n", mali_hw_core_register_read(&core->hw_core, MALI200_REG_ADDR_MGMT_PERF_CNT_1_VALUE)));
}

开发者ID:CobraJet93，项目名称:kernel-3.10.54，代码行数:16，代码来源:mali_pp.c

示例17: mali_block_allocator_create

mali_physical_memory_allocator * mali_block_allocator_create(u32 base_address, u32 cpu_usage_adjust, u32 size, const char *name)
{
    mali_physical_memory_allocator * allocator;
    block_allocator * info;
    u32 usable_size;
    u32 num_blocks;

    usable_size = size & ~(MALI_BLOCK_SIZE - 1);
    MALI_DEBUG_PRINT(3, ("Mali block allocator create for region starting at 0x%08X length 0x%08X\n", base_address, size));
    MALI_DEBUG_PRINT(4, ("%d usable bytes\n", usable_size));
    num_blocks = usable_size / MALI_BLOCK_SIZE;
    MALI_DEBUG_PRINT(4, ("which becomes %d blocks\n", num_blocks));

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MALI_ERROR函数代码示例发布时间：2022-05-30

C++ MALI_DEBUG_ASSERT函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18222|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9658|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8173|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8450|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8420|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8405|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7392|2022-11-06

客服电话

电子邮件

C++ MALI_DEBUG_PRINT函数代码示例

示例1: mali_regulator_set_voltage

示例2: mali_dvfs_work_handler

示例3: mali_allocation_engine_allocate_memory

示例4: mali_platform_device_register

示例5: mali_pp_job_start

示例6: mali_pp_print_state

示例7: _mali_osk_wait_queue_wait_event

示例8: mali_mmu_print_state

示例9: MALI_DEBUG_PRINT

示例10: init_mali_clock

示例11: mali_clk_set_rate

示例12: mali_ioctl

示例13: mali_sysfs_register

示例14: MALI_DEBUG_PRINT

示例15: block_allocator_allocate

示例16: mali_pp_print_registers

示例17: mali_block_allocator_create

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

CVE-2022-34965

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

个体户条例实施细则，2020 最新个体工商户

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053