• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ MATRIX_SCAN_CODE函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中MATRIX_SCAN_CODE函数的典型用法代码示例。如果您正苦于以下问题:C++ MATRIX_SCAN_CODE函数的具体用法?C++ MATRIX_SCAN_CODE怎么用?C++ MATRIX_SCAN_CODE使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了MATRIX_SCAN_CODE函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: tegra_kbc_report_keys

static void tegra_kbc_report_keys(struct tegra_kbc *kbc)
{
	unsigned char scancodes[KBC_MAX_KPENT];
	unsigned short keycodes[KBC_MAX_KPENT];
	u32 val = 0;
	unsigned int i;
	unsigned int num_down = 0;
	bool fn_keypress = false;
	bool key_in_same_row = false;
	bool key_in_same_col = false;

	for (i = 0; i < KBC_MAX_KPENT; i++) {
		if ((i % 4) == 0)
			val = readl(kbc->mmio + KBC_KP_ENT0_0 + i);

		if (val & 0x80) {
			unsigned int col = val & 0x07;
			unsigned int row = (val >> 3) & 0x0f;
			unsigned char scancode =
				MATRIX_SCAN_CODE(row, col, KBC_ROW_SHIFT);

			scancodes[num_down] = scancode;
			keycodes[num_down] = kbc->keycode[scancode];
			/* If driver uses Fn map, do not report the Fn key. */
			if ((keycodes[num_down] == KEY_FN) && kbc->use_fn_map)
				fn_keypress = true;
			else
				num_down++;
		}

		val >>= 8;
	}
开发者ID:0x000000FF,项目名称:Linux4Edison,代码行数:32,代码来源:tegra-kbc.c


示例2: tca8418_read_keypad

static void tca8418_read_keypad(struct tca8418_keypad *keypad_data)
{
	struct input_dev *input = keypad_data->input;
	unsigned short *keymap = input->keycode;
	int error, col, row;
	u8 reg, state, code;

	/* Initial read of the key event FIFO */
	error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, &reg);

	/* Assume that key code 0 signifies empty FIFO */
	while (error >= 0 && reg > 0) {
		state = reg & KEY_EVENT_VALUE;
		code  = reg & KEY_EVENT_CODE;

		row = code / TCA8418_MAX_COLS;
		col = code % TCA8418_MAX_COLS;

		row = (col) ? row : row - 1;
		col = (col) ? col - 1 : TCA8418_MAX_COLS - 1;

		code = MATRIX_SCAN_CODE(row, col, keypad_data->row_shift);
		input_event(input, EV_MSC, MSC_SCAN, code);
		input_report_key(input, keymap[code], state);

		/* Read for next loop */
		error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, &reg);
	}

	if (error < 0)
		dev_err(&keypad_data->client->dev,
			"unable to read REG_KEY_EVENT_A\n");

	input_sync(input);
}
开发者ID:020gzh,项目名称:linux,代码行数:35,代码来源:tca8418_keypad.c


示例3: ske_keypad_report

static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col)
{
	int row = 0, code, pos;
	struct input_dev *input = keypad->input;
	u32 ske_ris;
	int key_pressed;
	int num_of_rows;

	/* find out the row */
	num_of_rows = hweight8(status);
	do {
		pos = __ffs(status);
		row = pos;
		status &= ~(1 << pos);

		code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
		ske_ris = readl(keypad->reg_base + SKE_RIS);
		key_pressed = ske_ris & SKE_KPRISA;

		input_event(input, EV_MSC, MSC_SCAN, code);
		input_report_key(input, keypad->keymap[code], key_pressed);
		input_sync(input);
		num_of_rows--;
	} while (num_of_rows);
}
开发者ID:3null,项目名称:linux,代码行数:25,代码来源:nomadik-ske-keypad.c


示例4: ftkbc010_interrupt

/******************************************************************************
 * interrupt handler
 *****************************************************************************/
static irqreturn_t ftkbc010_interrupt(int irq, void *dev_id)
{
	struct ftkbc010 *ftkbc010 = dev_id;
	struct input_dev *input = ftkbc010->input;
	unsigned int status;
	unsigned int cr;

	status = ioread32(ftkbc010->base + FTKBC010_OFFSET_ISR);

	/*
	 * The clear interrupt bits are inside control register,
	 * so we need to read it out and then modify it -
	 * completely brain-dead design.
	 */
	cr = ioread32(ftkbc010->base + FTKBC010_OFFSET_CR);

	if (status & FTKBC010_ISR_RXINT) {
		dev_dbg(&input->dev, "RXINT\n");
		cr |= FTKBC010_CR_CL_RXINT;
	}

	if (status & FTKBC010_ISR_TXINT) {
		dev_dbg(&input->dev, "TXINT\n");
		cr |= FTKBC010_CR_CL_TXINT;
	}

	if (status & FTKBC010_ISR_PADINT) {
		unsigned int data;
		unsigned int row, col;
		unsigned int scancode;
		unsigned int keycode;

		data = ioread32(ftkbc010->base + FTKBC010_OFFSET_XC);
		col = ffs(0xff - FTKBC010_XC_L(data)) - 1;

		data = ioread32(ftkbc010->base + FTKBC010_OFFSET_YC);
		row = ffs(0xff - FTKBC010_YC_L(data)) - 1;

		scancode = MATRIX_SCAN_CODE(row, col, ftkbc010->row_shift);

		keycode = ftkbc010->keycode[scancode];

		input_report_key(input, keycode, 1);
		input_sync(input);

		/* We cannot tell key release - simulate one */
		input_report_key(input, keycode, 0);
		input_sync(input);

		dev_info(&input->dev, "(%x, %x) scancode %d, keycode %d\n",
			row, col, scancode, keycode);

		cr |= FTKBC010_CR_CL_PADINT;
	}

	iowrite32(cr, ftkbc010->base + FTKBC010_OFFSET_CR);

	return IRQ_HANDLED;
}
开发者ID:pychuang,项目名称:linux.ftkbc010,代码行数:62,代码来源:ftkbc010.c


示例5: matrix_keypad_scan

/*
 * This gets the keys from keyboard and reports it to input subsystem
 */
static void matrix_keypad_scan(struct work_struct *work)
{
	struct matrix_keypad *keypad =
		container_of(work, struct matrix_keypad, work.work);
	struct input_dev *input_dev = keypad->input_dev;
	const unsigned short *keycodes = input_dev->keycode;
	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
	uint32_t new_state[MATRIX_MAX_COLS];
	int row, col, code;

	/* de-activate all columns for scanning */
	activate_all_cols(pdata, false);

	memset(new_state, 0, sizeof(new_state));

	/* assert each column and read the row status out */
	for (col = 0; col < pdata->num_col_gpios; col++) {

		activate_col(pdata, col, true);

		for (row = 0; row < pdata->num_row_gpios; row++)
			new_state[col] |=
				row_asserted(pdata, row) ? (1 << row) : 0;

		activate_col(pdata, col, false);
	}

	for (col = 0; col < pdata->num_col_gpios; col++) {
		uint32_t bits_changed;

		bits_changed = keypad->last_key_state[col] ^ new_state[col];
		if (bits_changed == 0)
			continue;

		for (row = 0; row < pdata->num_row_gpios; row++) {
			if ((bits_changed & (1 << row)) == 0)
				continue;

			code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
			input_event(input_dev, EV_MSC, MSC_SCAN, code);
			input_report_key(input_dev,
					 keycodes[code],
					 new_state[col] & (1 << row));
		}
	}
	input_sync(input_dev);

	memcpy(keypad->last_key_state, new_state, sizeof(new_state));

	activate_all_cols(pdata, true);

	/* Enable IRQs again */
	spin_lock_irq(&keypad->lock);
	keypad->scan_pending = false;
	enable_row_irqs(keypad);
	spin_unlock_irq(&keypad->lock);
}
开发者ID:03199618,项目名称:linux,代码行数:60,代码来源:matrix_keypad.c


示例6: omap_kp_tasklet

static void omap_kp_tasklet(unsigned long data)
{
	struct omap_kp *omap_kp_data = (struct omap_kp *) data;
	unsigned short *keycodes = omap_kp_data->input->keycode;
	unsigned int row_shift = get_count_order(omap_kp_data->cols);
	unsigned char new_state[8], changed, key_down = 0;
	int col, row;
	int spurious = 0;

	/* check for any changes */
	omap_kp_scan_keypad(omap_kp_data, new_state);

	/* check for changes and print those */
	for (col = 0; col < omap_kp_data->cols; col++) {
		changed = new_state[col] ^ keypad_state[col];
		key_down |= new_state[col];
		if (changed == 0)
			continue;

		for (row = 0; row < omap_kp_data->rows; row++) {
			int key;
			if (!(changed & (1 << row)))
				continue;
#ifdef NEW_BOARD_LEARNING_MODE
			printk(KERN_INFO "omap-keypad: key %d-%d %s\n", col,
			       row, (new_state[col] & (1 << row)) ?
			       "pressed" : "released");
#else
			key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)];

			if (!(kp_cur_group == (key & GROUP_MASK) ||
			      kp_cur_group == -1))
				continue;

			kp_cur_group = key & GROUP_MASK;
			input_report_key(omap_kp_data->input, key & ~GROUP_MASK,
					 new_state[col] & (1 << row));
#endif
		}
	}
	input_sync(omap_kp_data->input);
	memcpy(keypad_state, new_state, sizeof(keypad_state));

	if (key_down) {
		int delay = HZ / 20;
		/* some key is pressed - keep irq disabled and use timer
		 * to poll the keypad */
		if (spurious)
			delay = 2 * HZ;
		mod_timer(&omap_kp_data->timer, jiffies + delay);
	} else {
		/* enable interrupts */
		omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
		kp_cur_group = -1;
	}
}
开发者ID:020gzh,项目名称:linux,代码行数:56,代码来源:omap-keypad.c


示例7: check_key_down

static int check_key_down(struct sci_keypad_t *sci_kpd, int key_status, int key_value)
{
	int col, row, key;
	unsigned short *keycodes = sci_kpd->input_dev->keycode;
	unsigned int row_shift = get_count_order(sci_kpd->cols);

	if((key_status & 0xff) != 0) {
		col = KPD_INT0_COL(key_status);
		row = KPD_INT0_ROW(key_status);
		key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)];
		if(key == key_value)
			return 1;
	}
	if((key_status & 0xff00) != 0) {
		col = KPD_INT1_COL(key_status);
		row = KPD_INT1_ROW(key_status);
		key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)];
		if(key == key_value)
			return 1;
	}
	return 0;
}
开发者ID:LinkLunk,项目名称:android_kernel_samsung_mint,代码行数:22,代码来源:sc8825_keypad.c


示例8: db5500_gpio_release_work

static void db5500_gpio_release_work(struct work_struct *work)
{
	int code;
	struct db5500_keypad *keypad = container_of(work,
					struct db5500_keypad, gpio_work.work);
	struct input_dev *input = keypad->input;

	code = MATRIX_SCAN_CODE(keypad->gpio_col, keypad->gpio_row,
						KEYPAD_ROW_SHIFT);
	input_event(input, EV_MSC, MSC_SCAN, code);
	input_report_key(input, keypad->keymap[code], 1);
	input_sync(input);
	input_report_key(input, keypad->keymap[code], 0);
	input_sync(input);
}
开发者ID:1DeMaCr,项目名称:android_hd_kernel_samsung_codina,代码行数:15,代码来源:db5500_keypad.c


示例9: omap4_keypad_interrupt

/* Interrupt handler */
static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
{
	struct omap4_keypad *keypad_data = dev_id;
	struct input_dev *input_dev = keypad_data->input;
	unsigned char key_state[ARRAY_SIZE(keypad_data->key_state)];
	unsigned int col, row, code, changed;
	u32 *new_state = (u32 *) key_state;

	/* Disable interrupts */
	__raw_writel(OMAP4_VAL_IRQDISABLE,
		     keypad_data->base + OMAP4_KBD_IRQENABLE);

	*new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
	*(new_state + 1) = __raw_readl(keypad_data->base
						+ OMAP4_KBD_FULLCODE63_32);

	for (row = 0; row < keypad_data->rows; row++) {
		changed = key_state[row] ^ keypad_data->key_state[row];
		if (!changed)
			continue;

		for (col = 0; col < keypad_data->cols; col++) {
			if (changed & (1 << col)) {
				code = MATRIX_SCAN_CODE(row, col,
						keypad_data->row_shift);
				input_event(input_dev, EV_MSC, MSC_SCAN, code);
				input_report_key(input_dev,
						 keypad_data->keymap[code],
						 key_state[row] & (1 << col));
			}
		}
	}

	input_sync(input_dev);

	memcpy(keypad_data->key_state, key_state,
		sizeof(keypad_data->key_state));

	/* clear pending interrupts */
	__raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
			keypad_data->base + OMAP4_KBD_IRQSTATUS);

	/* enable interrupts */
	__raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
			keypad_data->base + OMAP4_KBD_IRQENABLE);

	return IRQ_HANDLED;
}
开发者ID:33d,项目名称:linux-2.6.21-hh20,代码行数:49,代码来源:omap4-keypad.c


示例10: w90p910_keypad_scan_matrix

static void w90p910_keypad_scan_matrix(struct w90p910_keypad *keypad,
							unsigned int status)
{
	struct input_dev *input_dev = keypad->input_dev;
	unsigned int row = KGET_RAW(status);
	unsigned int col = KGET_COLUMN(status);
	unsigned int code = MATRIX_SCAN_CODE(row, col, W90P910_ROW_SHIFT);
	unsigned int key = keypad->keymap[code];

	input_event(input_dev, EV_MSC, MSC_SCAN, code);
	input_report_key(input_dev, key, 1);
	input_sync(input_dev);

	input_event(input_dev, EV_MSC, MSC_SCAN, code);
	input_report_key(input_dev, key, 0);
	input_sync(input_dev);
}
开发者ID:3null,项目名称:linux,代码行数:17,代码来源:w90p910_keypad.c


示例11: db5500_keypad_report

/**
 * db5500_keypad_report() - reports the keypad event
 * @keypad: pointer to device structure
 * @row: row value of keypad
 * @curr: current event
 * @previous: previous event
 *
 * This function uses to reports the event of the keypad
 * and returns NONE.
 *
 * By default all column reads are 1111 1111b.  Any press will pull the column
 * down, leading to a 0 in any of these locations.  We invert these values so
 * that a 1 means means "column pressed". *
 * If curr changes from the previous from 0 to 1, we report it as a key press.
 * If curr changes from the previous from 1 to 0, we report it as a key
 * release.
 */
static void db5500_keypad_report(struct db5500_keypad *keypad, int row,
				 u8 curr, u8 previous)
{
	struct input_dev *input = keypad->input;
	u8 changed  = curr ^ previous;

	while (changed) {
		int col = __ffs(changed);
		bool press = curr & BIT(col);
		int code = MATRIX_SCAN_CODE(row, col, KEYPAD_ROW_SHIFT);

		input_event(input, EV_MSC, MSC_SCAN, code);
		input_report_key(input, keypad->keymap[code], press);
		input_sync(input);

		changed &= ~BIT(col);
	}
}
开发者ID:1DeMaCr,项目名称:android_hd_kernel_samsung_codina,代码行数:35,代码来源:db5500_keypad.c


示例12: cros_ec_keyb_compute_valid_keys

/*
 * Walks keycodes flipping bit in buffer COLUMNS deep where bit is ROW.  Used by
 * ghosting logic to ignore NULL or virtual keys.
 */
static void cros_ec_keyb_compute_valid_keys(struct cros_ec_keyb *ckdev)
{
	int row, col;
	int row_shift = ckdev->row_shift;
	unsigned short *keymap = ckdev->idev->keycode;
	unsigned short code;

	BUG_ON(ckdev->idev->keycodesize != sizeof(*keymap));

	for (col = 0; col < ckdev->cols; col++) {
		for (row = 0; row < ckdev->rows; row++) {
			code = keymap[MATRIX_SCAN_CODE(row, col, row_shift)];
			if (code && (code != KEY_BATTERY))
				ckdev->valid_keys[col] |= 1 << row;
		}
		dev_dbg(ckdev->dev, "valid_keys[%02d] = 0x%02x\n",
			col, ckdev->valid_keys[col]);
	}
}
开发者ID:020gzh,项目名称:linux,代码行数:23,代码来源:cros_ec_keyb.c


示例13: __pmic8xxx_kp_scan_matrix

static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
                                      u16 *old_state)
{
    int row, col, code;

    for (row = 0; row < kp->pdata->num_rows; row++) {
        int bits_changed = new_state[row] ^ old_state[row];

        if (!bits_changed)
            continue;

        for (col = 0; col < kp->pdata->num_cols; col++) {
            if (!(bits_changed & (1 << col)))
                continue;

            dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
                    !(new_state[row] & (1 << col)) ?
                    "pressed" : "released");

            code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);

            input_event(kp->input, EV_MSC, MSC_SCAN, code);
            input_report_key(kp->input,
                             kp->keycodes[code],
                             !(new_state[row] & (1 << col)));

            input_sync(kp->input);

#if defined (DSEC_KEYBOARD_CODE_DEBUG)
            pr_info("key [%d:%d] %s keycode [%d]\n", row, col,
                    !(new_state[row] & (1 << col)) ?
                    "pressed" : "released", kp->keycodes[code]);
#else
            pr_info("key %s\n",
                    !(new_state[row] & (1 << col)) ? "pressed" : "released");
#endif

#if defined(CONFIG_SEC_DEBUG)
            sec_debug_check_crash_key(kp->keycodes[code], !(new_state[row] & (1 << col)));
#endif
        }
    }
}
开发者ID:ptmr3,项目名称:Skyrocket_JB_Kernel,代码行数:43,代码来源:pmic8xxx-keypad.c


示例14: __pmic8058_kp_scan_matrix

static int __pmic8058_kp_scan_matrix(struct pmic8058_kp *kp, u16 *new_state,
					 u16 *old_state)
{
	int row, col, code;

	for (row = 0; row < kp->pdata->num_rows; row++) {
		int bits_changed = new_state[row] ^ old_state[row];

		if (!bits_changed)
			continue;

		for (col = 0; col < kp->pdata->num_cols; col++) {
			if (!(bits_changed & (1 << col)))
				continue;

			dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
					!(new_state[row] & (1 << col)) ?
					"pressed" : "released");

			code = MATRIX_SCAN_CODE(row, col, PM8058_ROW_SHIFT);

/* in order to avoid reporting unvalid codes to input system, we should check the key's value not the index */
/* report the event only if the key is in the map.  */
#ifdef CONFIG_HUAWEI_KERNEL	
            if (kp->keycodes[code])
            {
#endif	
			input_event(kp->input, EV_MSC, MSC_SCAN, code);
			input_report_key(kp->input,
					kp->keycodes[code],
					!(new_state[row] & (1 << col)));

			input_sync(kp->input);
#ifdef CONFIG_HUAWEI_KERNEL		
            }
#endif	
		}
	}

	return 0;
}
开发者ID:desalesouche,项目名称:kernel_huawei,代码行数:41,代码来源:pmic8058-keypad.c


示例15: matrix_keypad_map_key

static bool matrix_keypad_map_key(struct input_dev *input_dev,
				  unsigned int rows, unsigned int cols,
				  unsigned int row_shift, unsigned int key)
{
	unsigned short *keymap = input_dev->keycode;
	unsigned int row = KEY_ROW(key);
	unsigned int col = KEY_COL(key);
	unsigned short code = KEY_VAL(key);

	if (row >= rows || col >= cols) {
		dev_err(input_dev->dev.parent,
			"%s: invalid keymap entry 0x%x (row: %d, col: %d, rows: %d, cols: %d)\n",
			__func__, key, row, col, rows, cols);
		return false;
	}

	keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
	__set_bit(code, input_dev->keybit);

	return true;
}
开发者ID:AdrianHuang,项目名称:linux-3.8.13,代码行数:21,代码来源:matrix-keymap.c


示例16: ske_keypad_read_data

static void ske_keypad_read_data(struct ske_keypad *keypad)
{
	struct input_dev *input = keypad->input;
	u16 status;
	int col = 0, row = 0, code;
	int ske_asr, ske_ris, key_pressed, i;

	/*
	 * Read the auto scan registers
	 *
	 * Each SKE_ASRx (x=0 to x=3) contains two row values.
	 * lower byte contains row value for column 2*x,
	 * upper byte contains row value for column 2*x + 1
	 */
	for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) {
		ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i));
		if (!ske_asr)
			continue;

		/* now that ASRx is zero, find out the column x and row y*/
		if (ske_asr & 0xff) {
			col = i * 2;
			status = ske_asr & 0xff;
		} else {
			col = (i * 2) + 1;
			status = (ske_asr & 0xff00) >> 8;
		}

		/* find out the row */
		row = __ffs(status);

		code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
		ske_ris = readl(keypad->reg_base + SKE_RIS);
		key_pressed = ske_ris & SKE_KPRISA;

		input_event(input, EV_MSC, MSC_SCAN, code);
		input_report_key(input, keypad->keymap[code], key_pressed);
		input_sync(input);
	}
}
开发者ID:125radheyshyam,项目名称:linux,代码行数:40,代码来源:nomadik-ske-keypad.c


示例17: __pmic8xxx_kp_scan_matrix

static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
					 u16 *old_state)
{
	int row, col, code;

	for (row = 0; row < kp->pdata->num_rows; row++) {
		int bits_changed = new_state[row] ^ old_state[row];

		if (!bits_changed)
			continue;

		for (col = 0; col < kp->pdata->num_cols; col++) {
			if (!(bits_changed & (1 << col)))
				continue;

			dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
					!(new_state[row] & (1 << col)) ?
					"pressed" : "released");
#if defined(CONFIG_MACH_APQ8064_GKKT)||defined(CONFIG_MACH_APQ8064_GKU) || defined(CONFIG_MACH_APQ8064_GKSK)
			if(!row && !col)
				pr_info("[key] Volume Down %s\n",!(new_state[row] & (1 << col)) ? "pressed" : "released");
			else if(!row && col)
				pr_info("[key] Volume Up %s\n",!(new_state[row] & (1 << col)) ? "pressed" : "released");
			else if(row && !col)
				pr_info("[key] Quick Memo %s\n",!(new_state[row] & (1 << col)) ? "pressed" : "released");
			else
				pr_info("[key] Home %s\n",!(new_state[row] & (1 << col)) ? "pressed" : "released");
#endif

			code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);

			input_event(kp->input, EV_MSC, MSC_SCAN, code);
			input_report_key(kp->input,
					kp->keycodes[code],
					!(new_state[row] & (1 << col)));

			input_sync(kp->input);
		}
	}
}
开发者ID:TheTypoMaster,项目名称:android_kernel_lg_awifi,代码行数:40,代码来源:pmic8xxx-keypad.c


示例18: k3v2_keypad_update_keycode

/* Update the new_keycode_state*/
static void k3v2_keypad_update_keycode(struct k3v2_keypad *keypad,
	unsigned char *new_scancode_state,
	uint16_t *new_keycode_state)
{
	int row = 0;
	int col = 0;
	int r = 0;
	int c = 0;
	int index = 0;
	uint8_t keycode = 0;

	for (row = 0; row < KPC_MAX_ROWS; row++) {
		for (col = 0; col < KPC_MAX_COLS; col++) {
			if (new_scancode_state[row] & (1 << col)) {
				index = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
				keycode = keypad->keycodes[index];
				c = keycode & 0x0F;
				r = keycode >> 4;
				new_keycode_state[r] |= (1 << c);
			}
		}
	}
开发者ID:alfataks-P6-Carbon,项目名称:Kernel-3.0.8,代码行数:23,代码来源:k3_keypad.c


示例19: __pmic8xxx_kp_scan_matrix

static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
					 u16 *old_state)
{
	int row, col, code;

	for (row = 0; row < kp->pdata->num_rows; row++) {
		int bits_changed = new_state[row] ^ old_state[row];

		if (!bits_changed)
			continue;

		for (col = 0; col < kp->pdata->num_cols; col++) {
			if (!(bits_changed & (1 << col)))
				continue;

			dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
					!(new_state[row] & (1 << col)) ?
					"pressed" : "released");

			code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);

			/*reduce invalid input event*/
#ifdef CONFIG_HUAWEI_KERNEL	
            if (kp->keycodes[code])
            {
#endif	
				input_event(kp->input, EV_MSC, MSC_SCAN, code);
				input_report_key(kp->input,
						kp->keycodes[code],
						!(new_state[row] & (1 << col)));
				/* use mmi_keystate save the key state */
	       		mmi_keystate[kp->keycodes[code]] = (!(new_state[row]&(1<<col)))? MMI_KEY_DOWN :MMI_KEY_UP ;
				input_sync(kp->input);
#ifdef CONFIG_HUAWEI_KERNEL		
             }
#endif	
		}
	}
}
开发者ID:ZolaIII,项目名称:android_kernel_synopsis_deprecated,代码行数:39,代码来源:pmic8xxx-keypad.c


示例20: samsung_keypad_report

static bool samsung_keypad_report(struct samsung_keypad *keypad,
				  unsigned int *row_state)
{
	struct input_dev *input_dev = keypad->input_dev;
	unsigned int changed;
	unsigned int pressed;
	unsigned int key_down = 0;
	unsigned int val;
	unsigned int col, row;

	for (col = 0; col < keypad->cols; col++) {
		changed = row_state[col] ^ keypad->row_state[col];
		key_down |= row_state[col];
		if (!changed)
			continue;

		for (row = 0; row < keypad->rows; row++) {
			if (!(changed & (1 << row)))
				continue;

			pressed = row_state[col] & (1 << row);

			dev_dbg(&keypad->input_dev->dev,
				"key %s, row: %d, col: %d\n",
				pressed ? "pressed" : "released", row, col);

			val = MATRIX_SCAN_CODE(row, col, keypad->row_shift);

			input_event(input_dev, EV_MSC, MSC_SCAN, val);
			input_report_key(input_dev,
					keypad->keycodes[val], pressed);
		}
		input_sync(keypad->input_dev);
	}

	memcpy(keypad->row_state, row_state, sizeof(keypad->row_state));

	return key_down;
}
开发者ID:1111saeid,项目名称:jb_kernel_3.0.16_htc_golfu,代码行数:39,代码来源:samsung-keypad.c



注:本文中的MATRIX_SCAN_CODE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ MAX函数代码示例发布时间:2022-05-30
下一篇:
C++ MATCH_SPACE函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap