C++ MCSDL_GPIO_SDA_SET_OUTPUT函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MCSDL_GPIO_SDA_SET_OUTPUT函数的典型用法代码示例。如果您正苦于以下问题：C++ MCSDL_GPIO_SDA_SET_OUTPUT函数的具体用法？C++ MCSDL_GPIO_SDA_SET_OUTPUT怎么用？C++ MCSDL_GPIO_SDA_SET_OUTPUT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MCSDL_GPIO_SDA_SET_OUTPUT函数的12个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: mcsdl_reboot_mcs

static void mcsdl_reboot_mcs(void)
{
	//--------------------------------------------
	// Tkey module reset
	//--------------------------------------------

	MCSDL_VDD_SET_LOW();

	MCSDL_CE_SET_LOW();
    MCSDL_CE_SET_OUTPUT();

	MCSDL_GPIO_SDA_SET_HIGH();
	MCSDL_GPIO_SDA_SET_OUTPUT();

	MCSDL_GPIO_SCL_SET_HIGH();
	MCSDL_GPIO_SCL_SET_OUTPUT();

	//MCSDL_SET_HW_I2C();

	MCSDL_RESETB_SET_LOW();
	MCSDL_RESETB_SET_OUTPUT();

	mcsdl_delay(MCSDL_DELAY_25MS);						// Delay for Stable VDD

	MCSDL_VDD_SET_HIGH();

	MCSDL_RESETB_SET_HIGH();
    MCSDL_RESETB_SET_INPUT();
    MCSDL_GPIO_SCL_SET_INPUT();
    MCSDL_GPIO_SDA_SET_INPUT();

    mcsdl_delay(MCSDL_DELAY_30MS); 						// Delay '25 msec'
}

开发者ID:Pantech-Discover，项目名称:android_kernel_pantech_oscar，代码行数:33，代码来源:mms100_ISP_download.c

示例2: mcsdl_read_32bits

static void mcsdl_read_32bits( UINT8 *pData )
{
	int i, j;
    MCSDL_GPIO_SCL_SET_LOW();
	MCSDL_GPIO_SDA_SET_LOW();
	MCSDL_GPIO_SDA_SET_INPUT();



        for (i=3; i>=0; i--){

		pData[i] = 0;

		for (j=0; j<8; j++){

			pData[i] <<= 1;

            MCSDL_GPIO_SCL_SET_LOW();   mcsdl_delay(MCSDL_DELAY_1US);
            MCSDL_GPIO_SCL_SET_HIGH();  mcsdl_delay(MCSDL_DELAY_1US);

            if (MCSDL_GPIO_SDA_IS_HIGH())
                pData[i] |= 0x01;
        }
    }

    MCSDL_GPIO_SDA_SET_LOW();
    MCSDL_GPIO_SDA_SET_OUTPUT(0);
}

开发者ID:rcunningham12，项目名称:L38C-Dynamic-Kernel，代码行数:28，代码来源:mcs8000_download.c

示例3: mcsdl_set_ready

static void mcsdl_set_ready(void)
{
	//--------------------------------------------
	// Tkey module reset
	//--------------------------------------------

	MCSDL_VDD_SET_LOW(); // power

	//MCSDL_CE_SET_LOW();
	MCSDL_CE_SET_OUTPUT();

	MCSDL_SET_GPIO_I2C();

	MCSDL_GPIO_SDA_SET_LOW();
	MCSDL_GPIO_SDA_SET_OUTPUT();

	MCSDL_GPIO_SCL_SET_LOW();
	MCSDL_GPIO_SCL_SET_OUTPUT();

	MCSDL_RESETB_SET_LOW();
	MCSDL_RESETB_SET_OUTPUT();

	mcsdl_delay(MCSDL_DELAY_25MS);						// Delay for Stable VDD

	MCSDL_VDD_SET_HIGH();
	MCSDL_CE_SET_HIGH();

    MCSDL_GPIO_SCL_SET_LOW();
	MCSDL_GPIO_SDA_SET_HIGH();

	mcsdl_delay(MCSDL_DELAY_40MS); 						// Delay '30 msec'

}

开发者ID:Pantech-Discover，项目名称:android_kernel_pantech_oscar，代码行数:33，代码来源:mms100_ISP_download.c

示例4: mcsdl_reboot_mcs

static void mcsdl_reboot_mcs(void)
{
    MCSDL_VDD_SET_LOW();

    MCSDL_CE_SET_LOW();
    MCSDL_CE_SET_OUTPUT(0);

    MCSDL_GPIO_SDA_SET_HIGH();
    MCSDL_GPIO_SDA_SET_OUTPUT(1);

    MCSDL_GPIO_SCL_SET_HIGH();
    MCSDL_GPIO_SCL_SET_OUTPUT(1);

    MCSDL_RESETB_SET_LOW();
    MCSDL_RESETB_SET_OUTPUT(0);

    mcsdl_delay(MCSDL_DELAY_25MS);                                          /* Delay for Stable VDD */

    MCSDL_VDD_SET_HIGH();
    /*MCSDL_CE_SET_HIGH();*/

    MCSDL_RESETB_SET_HIGH();
    MCSDL_RESETB_SET_INPUT();
    MCSDL_GPIO_SCL_SET_INPUT();
    MCSDL_GPIO_SDA_SET_INPUT();

    mcsdl_delay(MCSDL_DELAY_30MS);                                          /* Delay '25 msec' */
}

开发者ID:suiye223，项目名称:p920-ICS-kernel，代码行数:28，代码来源:mms136_ISP_download.c

示例5: mcsdl_write_bits

static void mcsdl_write_bits(UINT32 wordData, int nBits)
{
	int i;

	MCSDL_GPIO_SDA_SET_LOW();
	MCSDL_GPIO_SDA_SET_OUTPUT();

	for (i = 0; i < nBits; i++)
	{

		if (wordData & 0x80000000)
		{
			MCSDL_GPIO_SDA_SET_HIGH();
		}
		else
		{
			MCSDL_GPIO_SDA_SET_LOW();
		}

		mcsdl_delay(MCSDL_DELAY_7US);

		MCSDL_GPIO_SCL_SET_HIGH();
		mcsdl_delay(MCSDL_DELAY_3US);
		MCSDL_GPIO_SCL_SET_LOW();
		mcsdl_delay(MCSDL_DELAY_3US);

		wordData <<= 1;
	}
}

开发者ID:MichaelSX，项目名称:android_kernel_samsung_i9100g，代码行数:29，代码来源:melfas_download.c

示例6: mcsdl_download

//------------------------------------------------------------------
//
//	Download function
//
//------------------------------------------------------------------
static int mcsdl_download(const UINT8 *pBianry, const UINT16 unLength, INT8 IdxNum)
{
	int nRet;
#if 0
	int i;
	UINT8 Check_IC = 0xFF;	// d.model
	UINT8 readBuffer[32];
	UINT8 writeBuffer[4];
	UINT32 wordData;
#endif

	//---------------------------------
	// Check Binary Size
	//---------------------------------
	if (unLength >= MELFAS_FIRMWARE_MAX_SIZE)
	{
		nRet = MCSDL_RET_PROGRAM_SIZE_IS_WRONG;
		goto MCSDL_DOWNLOAD_FINISH;
	}

#if MELFAS_ENABLE_DBG_PROGRESS_PRINT
	printk(KERN_INFO " - Starting download...\n");
#endif

	//---------------------------------
	// Make it ready
	//---------------------------------
#if MELFAS_ENABLE_DBG_PROGRESS_PRINT
	printk(KERN_INFO " > Ready\n");
#endif
	mcsdl_set_ready();

#if 0
	mcsdl_delay(MCSDL_DELAY_1MS);
	//--------------------------------------------------------------
	// IC Information read from Flash
	//--------------------------------------------------------------
	if (IdxNum == 0)
	{
		mcsdl_select_isp_mode(ISP_MODE_SERIAL_READ);

		wordData   = ((0x1F00 & 0x1FFF) << 1) | 0x0;
		wordData <<= 14;
		mcsdl_write_bits(wordData, 18);

		mcsdl_read_flash(readBuffer);
		MCSDL_GPIO_SDA_SET_LOW();
		MCSDL_GPIO_SDA_SET_OUTPUT(0);

		mcsdl_unselect_isp_mode();

		//if (readBuffer[3] != 0xFF)
		Check_IC = readBuffer[3];
#if MELFAS_ENABLE_DBG_PROGRESS_PRINT
		printk("\IC Information :0x%02X,  0x%02X\n", readBuffer[3], Check_IC);
#endif
		mcsdl_delay(MCSDL_DELAY_1MS);
	}

开发者ID:CallMeVentus，项目名称:i9070_kernel_CoCore-P，代码行数:63，代码来源:mms100_download.c

示例7: mcsdl_scl_toggle_twice

static void mcsdl_scl_toggle_twice(void)
{

	MCSDL_GPIO_SDA_SET_HIGH();
	MCSDL_GPIO_SDA_SET_OUTPUT(1);

	MCSDL_GPIO_SCL_SET_HIGH();	mcsdl_delay(MCSDL_DELAY_20US);
	MCSDL_GPIO_SCL_SET_LOW();	mcsdl_delay(MCSDL_DELAY_20US);

	MCSDL_GPIO_SCL_SET_HIGH();	mcsdl_delay(MCSDL_DELAY_20US);
	MCSDL_GPIO_SCL_SET_LOW();	mcsdl_delay(MCSDL_DELAY_20US);
}

开发者ID:CL0SeY，项目名称:i957kernel，代码行数:12，代码来源:mcs8000_download.c

示例8: mcsdl_set_ready

void mcsdl_set_ready(void)
{
	//--------------------------------------------
	// Tkey module reset
	//--------------------------------------------

	MCSDL_VDD_SET_LOW(); // power 

	//MCSDL_CE_SET_LOW();
	//MCSDL_CE_SET_OUTPUT();

	//MCSDL_SET_GPIO_I2C();
	mcsdl_set_gpio_i2c();

	if (gpio_request(GPIO_TOUCH_I2C_SDA,"I2C3_SDA") != 0)
	{
		printk("TSP firm download, Could not request GPIO %d", GPIO_TOUCH_I2C_SDA);
		return -EIO;
	}

	if (gpio_request(GPIO_TOUCH_I2C_SCL,"I2C3_SCL") != 0)
	{
		printk("TSP firm download, Could not request GPIO %d", GPIO_TOUCH_I2C_SCL);
		return -EIO;
	}



	MCSDL_GPIO_SDA_SET_LOW();
	MCSDL_GPIO_SDA_SET_OUTPUT();

	MCSDL_GPIO_SCL_SET_LOW();
	MCSDL_GPIO_SCL_SET_OUTPUT();

	MCSDL_RESETB_SET_LOW();
	MCSDL_RESETB_SET_OUTPUT();

	mcsdl_delay(MCSDL_DELAY_25MS); // Delay for Stable VDD

	MCSDL_VDD_SET_HIGH();
	//MCSDL_CE_SET_HIGH();

	MCSDL_GPIO_SDA_SET_HIGH();

	mcsdl_delay(MCSDL_DELAY_10MS); //mcsdl_delay(MCSDL_DELAY_40MS); // Delay '30 msec'

}

开发者ID:CenterTurkHD，项目名称:android_kernel_samsung_hugo，代码行数:47，代码来源:melfas_download.c

示例9: mcsdl_reboot_mcs

static void mcsdl_reboot_mcs(void)
{
	//--------------------------------------------
	// Tkey module reset
	//--------------------------------------------

	MCSDL_VDD_SET_LOW();

	//MCSDL_CE_SET_LOW();
	//MCSDL_CE_SET_OUTPUT();

	MCSDL_GPIO_SDA_SET_HIGH();
	MCSDL_GPIO_SDA_SET_OUTPUT();

	MCSDL_GPIO_SCL_SET_HIGH();
	MCSDL_GPIO_SCL_SET_OUTPUT();

	//MCSDL_SET_HW_I2C();

	gpio_free(GPIO_TOUCH_I2C_SDA);
	gpio_free(GPIO_TOUCH_I2C_SCL);

	mdelay(500);

	mcsdl_set_hw_i2c();

	MCSDL_RESETB_SET_LOW();
	MCSDL_RESETB_SET_OUTPUT();

	mdelay(500); //mcsdl_delay(MCSDL_DELAY_60MS); // Delay for Stable VDD
	

	MCSDL_RESETB_SET_INPUT();
	MCSDL_VDD_SET_HIGH();

	MCSDL_RESETB_SET_HIGH();
	//MCSDL_CE_SET_HIGH();

	mdelay(500); //mcsdl_delay(MCSDL_DELAY_60MS); // Delay '25 msec'

}

开发者ID:CenterTurkHD，项目名称:android_kernel_samsung_hugo，代码行数:41，代码来源:melfas_download.c

示例10: mcsdl_set_ready

static void mcsdl_set_ready(void)
{
	//--------------------------------------------
	// Tkey module reset
	//--------------------------------------------

	MCSDL_VDD_SET_LOW(); // power

	//MCSDL_CE_SET_LOW();
	MCSDL_CE_SET_OUTPUT();

	MCSDL_SET_GPIO_I2C();

	//MCSDL_GPIO_SDA_SET_LOW(); //bomi
	MCSDL_GPIO_SDA_SET_OUTPUT();
	MCSDL_GPIO_SDA_SET_LOW();

	//MCSDL_GPIO_SCL_SET_LOW();  //bomi
	MCSDL_GPIO_SCL_SET_OUTPUT();
	MCSDL_GPIO_SCL_SET_LOW();

	//MCSDL_RESETB_SET_LOW();  //bomi
	MCSDL_RESETB_SET_OUTPUT();
	MCSDL_RESETB_SET_LOW();

	/* LGE_CHANGE_S: E0 [email protected] [2011-11-09] : 
	TD1416085584 :	After sleeping on and off while sensing a touchscreen,
	Touchscreen doesn't work*/
	mcsdl_delay(MCSDL_DELAY_25MS);						// Delay for Stable VDD
	mcsdl_delay(MCSDL_DELAY_25MS);						// Delay for Stable VDD

	MCSDL_VDD_SET_HIGH();
	MCSDL_CE_SET_HIGH();

    MCSDL_GPIO_SCL_SET_LOW();
	MCSDL_GPIO_SDA_SET_HIGH();

	mcsdl_delay(MCSDL_DELAY_40MS); 						// Delay '30 msec'

}

开发者ID:ochiman，项目名称:e405-kernel，代码行数:40，代码来源:mms100_ISP_download_e1.c

示例11: MFS_reboot

void MFS_reboot(void)
{
	MCSDL_VDD_SET_LOW();

	MCSDL_GPIO_SDA_SET_HIGH();
	MCSDL_GPIO_SDA_SET_OUTPUT(1);

	MCSDL_GPIO_SCL_SET_HIGH();
	MCSDL_GPIO_SCL_SET_OUTPUT(1);

	MCSDL_RESETB_SET_LOW();
	MCSDL_RESETB_SET_OUTPUT(1);

	MFS_ms_delay(25);

	MCSDL_VDD_SET_HIGH();

	MCSDL_RESETB_SET_HIGH();
	MCSDL_RESETB_SET_INPUT();
	MCSDL_GPIO_SCL_SET_INPUT();
	MCSDL_GPIO_SDA_SET_INPUT();

	MFS_ms_delay(25);
}

开发者ID:IjazCi，项目名称:android_kernel_samsung_kylexx，代码行数:24，代码来源:MMS100S_ISC_Updater_Customize.c

示例12: mcsdl_verify_flash

static int mcsdl_verify_flash( UINT8 *pDataOriginal, UINT16 unLength, INT8 IdxNum )
{
	int	  i, j;
	int	  nRet;

	UINT8 *pData;
	UINT8 ucLength;

	UINT16 addr;
	UINT32 wordData;

	addr  = 0;
	pData = (UINT8 *) pDataOriginal;

	ucLength  = MELFAS_TRANSFER_LENGTH;

    while ((addr*4) < (int)unLength)
    {
        if ((unLength - (addr*4)) < MELFAS_TRANSFER_LENGTH)
        {
            ucLength = (UINT8)(unLength - (addr * 4));
        }
        // start ADD DELAY
        mcsdl_delay(MCSDL_DELAY_40US);

        //--------------------------------------
        //	Select ISP Mode
        //--------------------------------------
        if (IdxNum > 0)
        {
            mcsdl_select_isp_mode(ISP_MODE_NEXT_CHIP_BYPASS);
		mcsdl_delay(MCSDL_DELAY_3US);
        }

    	mcsdl_select_isp_mode(ISP_MODE_SERIAL_READ);


    	//---------------------------------------------
    	//	Header
    	//	Address[13ibts] <<1
    	//---------------------------------------------

    	wordData   = ( (addr&0x1FFF) << 1 ) | 0x0;
    	wordData <<= 14;

    	mcsdl_write_bits( wordData, 18 );

        addr+=1;

    		#if MELFAS_ENABLE_DBG_PROGRESS_PRINT
    		printk("#");
    		#endif



    		//--------------------
    		// Read flash
    		//--------------------
    		mcsdl_read_flash( ucVerifyBuffer);

//kang

        MCSDL_GPIO_SDA_SET_LOW();
        MCSDL_GPIO_SDA_SET_OUTPUT(0);
//            mcsdl_delay(MCSDL_DELAY_1MS);
//kang
    		//--------------------
    		// Comparing
    		//--------------------


        if (IdxNum == 0)
        {
            for (j = 0; j < (int)ucLength; j++)
            {
#if MELFAS_ENABLE_DBG_PROGRESS_PRINT
                printk(" %02X", ucVerifyBuffer[j]);
#endif
                if (ucVerifyBuffer[j] != pData[j])
                {
#if MELFAS_ENABLE_DBG_PROGRESS_PRINT
	    				printk("\n [Error] Address : 0x%04X : 0x%02X - 0x%02X\n", addr, pData[j], ucVerifyBuffer[j] );
	                    #endif


	    				nRet = MCSDL_RET_PROGRAM_VERIFY_FAILED;
	    				goto MCSDL_VERIFY_FLASH_FINISH;

	    			}
	    		}
		}
        else // slave
        {
            for (j = 0; j < (int)ucLength; j++)
            {
#if MELFAS_ENABLE_DBG_PROGRESS_PRINT
                printk(" %02X", ucVerifyBuffer[j]);
#endif
                if ((0xff - ucVerifyBuffer[j]) != pData[j])
                {
//.........这里部分代码省略.........

开发者ID:CL0SeY，项目名称:i957kernel，代码行数:101，代码来源:mcs8000_download.c

注：本文中的MCSDL_GPIO_SDA_SET_OUTPUT函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MC_函数代码示例发布时间：2022-05-30

C++ MCSDL_GPIO_SDA_SET_LOW函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18222|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9658|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8173|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8450|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8420|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8405|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7392|2022-11-06

客服电话

电子邮件

C++ MCSDL_GPIO_SDA_SET_OUTPUT函数代码示例

示例1: mcsdl_reboot_mcs

示例2: mcsdl_read_32bits

示例3: mcsdl_set_ready

示例4: mcsdl_reboot_mcs

示例5: mcsdl_write_bits

示例6: mcsdl_download

示例7: mcsdl_scl_toggle_twice

示例8: mcsdl_set_ready

示例9: mcsdl_reboot_mcs

示例10: mcsdl_set_ready

示例11: MFS_reboot

示例12: mcsdl_verify_flash

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

CVE-2022-34965

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

个体户条例实施细则，2020 最新个体工商户

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053