• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ MD5Update函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中MD5Update函数的典型用法代码示例。如果您正苦于以下问题:C++ MD5Update函数的具体用法?C++ MD5Update怎么用?C++ MD5Update使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了MD5Update函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: HPAK_Validate_f


//.........这里部分代码省略.........

	COM_DefaultExtension(name, HASHPAK_EXTENSION);
	Con_Printf("Validating %s.\n", name);

	fp = FS_Open(name, "rb");
	if (!fp)
	{
		Con_Printf("ERROR: couldn't open %s.\n", name);
		return;
	}
	FS_Read(&header, sizeof(hash_pack_header_t), 1, fp);
	if (Q_strncmp(header.szFileStamp, "HPAK", sizeof(header.szFileStamp)))
	{
		Con_Printf("%s is not an HPAK file\n", name);
		FS_Close(fp);
		return;
	}
	if (header.version != HASHPAK_VERSION)
	{
		Con_Printf("hpkval:  version mismatch\n");
		FS_Close(fp);
		return;
	}
	FS_Seek(fp, header.nDirectoryOffset, FILESYSTEM_SEEK_HEAD);
	FS_Read(&directory.nEntries, 4, 1, fp);
	if (directory.nEntries < 1 || (unsigned int)directory.nEntries > MAX_FILE_ENTRIES)
	{
		Con_Printf("ERROR: HPAK had bogus # of directory entries:  %i\n", directory.nEntries);
		FS_Close(fp);
		return;
	}

	Con_Printf("# of Entries:  %i\n", directory.nEntries);
	Con_Printf("# Type Size FileName : MD5 Hash\n");

	directory.p_rgEntries = (hash_pack_entry_t *)Mem_Malloc(sizeof(hash_pack_entry_t) * directory.nEntries);
	FS_Read(directory.p_rgEntries, sizeof(hash_pack_entry_t) * directory.nEntries, 1, fp);
	for (int nCurrent = 0; nCurrent < directory.nEntries; nCurrent++)
	{
		entry = &directory.p_rgEntries[nCurrent];
		COM_FileBase(entry->resource.szFileName, szFileName);
		switch (entry->resource.type)
		{
			case t_sound:
				Q_strcpy(type, "sound");
				break;
			case t_skin:
				Q_strcpy(type, "skin");
				break;
			case t_model:
				Q_strcpy(type, "model");
				break;
			case t_decal:
				Q_strcpy(type, "decal");
				break;
			case t_generic:
				Q_strcpy(type, "generic");
				break;
			case t_eventscript:
				Q_strcpy(type, "event");
				break;
			default:
				Q_strcpy(type, "?");
				break;
		}

		Con_Printf("%i: %10s %.2fK %s:  ", nCurrent + 1, type, entry->resource.nDownloadSize / 1024.0f, szFileName);

		nDataSize = entry->nFileLength;
		if (nDataSize < 1 || (unsigned int)nDataSize >= MAX_FILE_SIZE)
			Con_Printf("Unable to MD5 hash data, size invalid:  %i\n", nDataSize);
		else
		{
			pData = (byte *)Mem_Malloc(nDataSize + 1);
			Q_memset(pData, 0, nDataSize);
			FS_Seek(fp, entry->nOffset, FILESYSTEM_SEEK_HEAD);
			FS_Read(pData, nDataSize, 1, fp);
			Q_memset(&ctx, 0, sizeof(MD5Context_t));

			MD5Init(&ctx);
			MD5Update(&ctx, pData, nDataSize);
			MD5Final(md5, &ctx);

			if (Q_memcmp(entry->resource.rgucMD5_hash, md5, sizeof(md5)) == 0)
				Con_Printf(" OK\n");
			else
			{
				Con_Printf(" MISMATCHED\n");
				Con_Printf("--------------------\n");
				Con_Printf(" File  :  %s\n", MD5_Print(entry->resource.rgucMD5_hash));
				Con_Printf(" Actual:  %s\n", MD5_Print(md5));
				Con_Printf("--------------------\n");
			}
			if (pData)
				Mem_Free(pData);
		}
	}
	FS_Close(fp);
	Mem_Free(directory.p_rgEntries);
}
开发者ID:Adidasman1,项目名称:rehlds,代码行数:101,代码来源:hashpak.cpp


示例2: CheckIsFileHashSecure

/**
* 先检测黑名单,如果在黑名单内,直接拒,否则放行。
   如果不在黑名单,则检查白名单,在白名单内,无操作。
     如果不在白名单内,则将文件全路径及hash值传递到上层
* @param filename 文件全路径。
* return 如果文件安全则返回true,否则返回false。
*/
bool CheckIsFileHashSecure(const PUNICODE_STRING filename)
{	
	/////////////////////////////////////////////比较已经过滤的文件名
	if(IsInBlackCache(filename) == true)
		return false;

	if( MODULE_FILTERED == GetModuleFilter((ULONG)PsGetCurrentProcessId(),filename) )		
		return true;
	///////////////////////////////////////

	HANDLE hFile;
	OBJECT_ATTRIBUTES oaFile;
	InitializeObjectAttributes(&oaFile, filename, OBJ_CASE_INSENSITIVE | OBJ_KERNEL_HANDLE, NULL, NULL);

	// 读权限打开文件,如果失败则认为文件不安全,返回false。
	IO_STATUS_BLOCK ioStatus;
	NTSTATUS status = ZwOpenFile(&hFile, GENERIC_READ, &oaFile, &ioStatus, FILE_SHARE_READ, FILE_SYNCHRONOUS_IO_NONALERT);
	if(!NT_SUCCESS(status))
	{
		KdPrint(("VerifyModule: ZwOpenFile: %ws %08x\n", filename->Buffer, status));
		return false;
	}

	unsigned char* fileBuf = (unsigned char*)ExAllocatePoolWithTag(PagedPool, FILE_BUFFER_SIZE, 'knab');
	if(fileBuf == NULL)
	{
		ZwClose(hFile);
		return false;
	}

	// 获取文件hash。
	MD5_CTX md5;
	MD5Init(&md5);
	ULONG sizeAll=0;
	
	FILE_STANDARD_INFORMATION fsi;
	ZwQueryInformationFile(hFile,&ioStatus,&fsi,sizeof(FILE_STANDARD_INFORMATION),FileStandardInformation);


	while(1)
	{
		NTSTATUS status = ZwReadFile(hFile, NULL, NULL, NULL, &ioStatus, fileBuf, 
			FILE_BUFFER_SIZE, NULL, NULL);
		if(!NT_SUCCESS(status))
			break;
		if(ioStatus.Information == 0)
			break;

		sizeAll += ioStatus.Information;
		MD5Update(&md5, fileBuf, ioStatus.Information);
	}
	ExFreePoolWithTag(fileBuf, 'knab');

	unsigned char final[16];
	MD5Final(final, &md5);

	ZwClose(hFile);

	//黑白名单校验
//  	bool bOK = IsHashBlack(final);
// 
// 	if( bOK )
// 	{
// 		if(!IsInBlackCache(filename))
// 		{
// 			WriteSysLog(LOG_TYPE_DEBUG,L" Fileter Module :%s", filename->Buffer);
// 			AddBlackCache(filename);
// 		}
// 		return false;
// 	}
// 	else if( !IsHashSecure(final) )//传递到上层 
// 	{
// 		if( setData(filename->Buffer,filename->Length,final,16) )
// 			setSigned();
// 	}	
	bool bOK = IsHashBlack(final);
	bool bReturn = true;

	if( bOK )
	{
		if(!IsInBlackCache(filename))
		{
			WriteSysLog(LOG_TYPE_INFO,L" Fileter Module :%s", filename->Buffer);
			AddBlackCache(filename);
		}
		bReturn = false;
	}
	else if( !IsHashSecure(final) )//传递到上层 
	{
		if( !IsInstall() )
		{
			if( setData(filename->Buffer,filename->Length,final,16) )
				setSigned();
//.........这里部分代码省略.........
开发者ID:Williamzuckerberg,项目名称:chtmoneyhub,代码行数:101,代码来源:MapViewOfSection.cpp


示例3: read_file

int read_file(char* file_name)
{
	puts("--------------------read file");
	int i;
	int fname_len = 0;
	int fdata_len = 0;

	int cur_len = 0;
	int tmp_len = 0;
	char rec_buf[1024] = {0};
	char tmp_buf[4096] = {0};
	char file_md5[32] = {0};

	int send_len = 0;
	char send_buf[4096] = {0};
	
	MD5_CTX mdContext;
	MD5Init (&mdContext);

    FILE *fp = fopen(file_name, "r");  
    if (fp == NULL)  
    {  
        printf("File:\t%s Can Not Open To Write!\n", file_name);  
        return -1;  
    }  
	printf("%s\n", file_name);

	while ((tmp_len = fread(rec_buf, sizeof(char), BUFFER_SIZE, fp)) > 0)
	{
		printf("tmplen:%d\n", tmp_len);
		strncpy(tmp_buf+cur_len, rec_buf, tmp_len);

	//printf("==================================\n");
	//printf("tmpbuf in clrcle is:\n");
	//printf("%s\n", tmp_buf);
	//printf("==================================\n");

		cur_len = cur_len + tmp_len;	

		//bzero(rec_buf, sizeof(rec_buf));
	}
	
	fname_len = strlen(file_name);
	fdata_len = strlen(tmp_buf);
	printf("fdata_len is:%d\n", fdata_len);

	MD5Update (&mdContext, tmp_buf, fdata_len);
	MD5Final (&mdContext);

	send_len = sizeof(send_len) + sizeof(fname_len) + fname_len + sizeof(fdata_len) + fdata_len + 32;

	memcpy(send_buf , &send_len, sizeof(int));
	memcpy(send_buf + sizeof(int), &fname_len, sizeof(int));
	memcpy(send_buf + 2*sizeof(int), file_name, fname_len);
	memcpy(send_buf + 2*sizeof(int) + fname_len, &fdata_len, sizeof(int));
	memcpy(send_buf + 3*sizeof(int) + fname_len, tmp_buf, fdata_len);

	for(i=0; i<16; i++)
	{
		sprintf(&file_md5[i*2], "%02x", mdContext.digest[i]);
	}
	printf("send md5 is:%s\n", file_md5);

	memcpy(send_buf + 3*sizeof(int) + fname_len + fdata_len, file_md5, 32);

	printf("==================================\n");
	printf("disbuf:\n");
	t_disbuf(send_buf, send_len + 4);
	printf("==================================\n");
	
	if (send_data(send_buf, send_len) < 0)
	{
		printf("senddata failed\n");
		return -1;
	}

	fclose(fp);
}
开发者ID:dulton,项目名称:solotools,代码行数:78,代码来源:xvcli_debug.c


示例4: chap_BuildAnswer_old

static char *
chap_BuildAnswer_old(char *name, char *key, u_char id, char *challenge, u_char type
#ifdef HAVE_DES
                     , int lanman
#endif
                    )
{
    char *result;
#ifndef __GNU__
    char *digest;
#endif /* __GNU__ */
    size_t nlen, klen;

    nlen = strlen(name);
    klen = strlen(key);

#ifdef HAVE_DES
    if (type == 0x80) {
        char expkey[AUTHLEN << 2];
        MD4_CTX MD4context;
        int f;

        if ((result = malloc(1 + nlen + MS_CHAP_RESPONSE_LEN)) == NULL)
            return result;

        digest = result;					/* the response */
        *digest++ = MS_CHAP_RESPONSE_LEN;			/* 49 */
        memcpy(digest + MS_CHAP_RESPONSE_LEN, name, nlen);
        if (lanman) {
            memset(digest + 24, '\0', 25);
            mschap_LANMan(digest, challenge + 1, key);	/* LANMan response */
        } else {
            memset(digest, '\0', 25);
            digest += 24;

            for (f = 0; f < klen; f++) {
                expkey[2*f] = key[f];
                expkey[2*f+1] = '\0';
            }
            /*
             *           -----------
             * expkey = | k\0e\0y\0 |
             *           -----------
             */
            MD4Init(&MD4context);
            MD4Update(&MD4context, expkey, klen << 1);
            MD4Final(digest, &MD4context);

            /*
             *           ---- -------- ---------------- ------- ------
             * result = | 49 | LANMan | 16 byte digest | 9 * ? | name |
             *           ---- -------- ---------------- ------- ------
             */
            mschap_NT(digest, challenge + 1);
        }
        /*
         *           ---- -------- ------------- ----- ------
         *          |    |  struct MS_ChapResponse24  |      |
         * result = | 49 | LANMan  |  NT digest | 0/1 | name |
         *           ---- -------- ------------- ----- ------
         * where only one of LANMan & NT digest are set.
         */
    } else
#endif
        if ((result = malloc(nlen + 17)) != NULL) {
            /* Normal MD5 stuff */
#ifdef __GNU__
            _exit (240); /* Critical */
#else
            MD5_CTX MD5context;

            digest = result;
            *digest++ = 16;				/* value size */

            MD5Init(&MD5context);
            MD5Update(&MD5context, &id, 1);
            MD5Update(&MD5context, key, klen);
            MD5Update(&MD5context, challenge + 1, *challenge);
            MD5Final(digest, &MD5context);

            memcpy(digest + 16, name, nlen);
            /*
             *           ---- -------- ------
             * result = | 16 | digest | name |
             *           ---- -------- ------
             */
#endif
        }

    return result;
}
开发者ID:fly2436732935,项目名称:android_kernel_honor7_PLK-AL10_PLK-TL01H_PLK-UL00_PLK-CL00_PLK-TL00,代码行数:91,代码来源:chap.c


示例5: saversakey

/*
 * Save an RSA key file. Return nonzero on success.
 */
int saversakey(const Filename *filename, struct RSAKey *key, char *passphrase)
{
    unsigned char buf[16384];
    unsigned char keybuf[16];
    struct MD5Context md5c;
    unsigned char *p, *estart;
    FILE *fp;

    /*
     * Write the initial signature.
     */
    p = buf;
    memcpy(p, rsa_signature, sizeof(rsa_signature));
    p += sizeof(rsa_signature);

    /*
     * One byte giving encryption type, and one reserved (zero)
     * uint32.
     */
    *p++ = (passphrase ? SSH_CIPHER_3DES : 0);
    PUT_32BIT(p, 0);
    p += 4;

    /*
     * An ordinary SSH-1 public key consists of: a uint32
     * containing the bit count, then two bignums containing the
     * modulus and exponent respectively.
     */
    PUT_32BIT(p, bignum_bitcount(key->modulus));
    p += 4;
    p += ssh1_write_bignum(p, key->modulus);
    p += ssh1_write_bignum(p, key->exponent);

    /*
     * A string containing the comment field.
     */
    if (key->comment) {
	PUT_32BIT(p, strlen(key->comment));
	p += 4;
	memcpy(p, key->comment, strlen(key->comment));
	p += strlen(key->comment);
    } else {
	PUT_32BIT(p, 0);
	p += 4;
    }

    /*
     * The encrypted portion starts here.
     */
    estart = p;

    /*
     * Two bytes, then the same two bytes repeated.
     */
    *p++ = random_byte();
    *p++ = random_byte();
    p[0] = p[-2];
    p[1] = p[-1];
    p += 2;

    /*
     * Four more bignums: the decryption exponent, then iqmp, then
     * q, then p.
     */
    p += ssh1_write_bignum(p, key->private_exponent);
    p += ssh1_write_bignum(p, key->iqmp);
    p += ssh1_write_bignum(p, key->q);
    p += ssh1_write_bignum(p, key->p);

    /*
     * Now write zeros until the encrypted portion is a multiple of
     * 8 bytes.
     */
    while ((p - estart) % 8)
	*p++ = '\0';

    /*
     * Now encrypt the encrypted portion.
     */
    if (passphrase) {
	MD5Init(&md5c);
	MD5Update(&md5c, (unsigned char *)passphrase, strlen(passphrase));
	MD5Final(keybuf, &md5c);
	des3_encrypt_pubkey(keybuf, estart, p - estart);
	smemclr(keybuf, sizeof(keybuf));	/* burn the evidence */
    }

    /*
     * Done. Write the result to the file.
     */
    fp = f_open(filename, "wb", TRUE);
    if (fp) {
	int ret = (fwrite(buf, 1, p - buf, fp) == (size_t) (p - buf));
        if (fclose(fp))
            ret = 0;
	return ret;
    } else
//.........这里部分代码省略.........
开发者ID:DAVe3283,项目名称:PuTTY,代码行数:101,代码来源:sshpubk.c


示例6: g_mbr_modify

/*
 * XXX: Add gctl_req arg and give good error msgs.
 * XXX: Check that length argument does not bring boot code inside any slice.
 */
static int
g_mbr_modify(struct g_geom *gp, struct g_mbr_softc *ms, u_char *sec0, int len __unused)
{
	int i, error;
	off_t l[NDOSPART];
	struct dos_partition ndp[NDOSPART], *dp;
	MD5_CTX md5sum;

	g_topology_assert();

	if (sec0[0x1fe] != 0x55 && sec0[0x1ff] != 0xaa)
		return (EBUSY);

	dp = ndp;
	for (i = 0; i < NDOSPART; i++) {
		dos_partition_dec(
		    sec0 + DOSPARTOFF + i * sizeof(struct dos_partition),
		    dp + i);
	}
	if ((!bcmp(dp, historical_bogus_partition_table,
	    sizeof historical_bogus_partition_table)) ||
	    (!bcmp(dp, historical_bogus_partition_table_fixed,
	    sizeof historical_bogus_partition_table_fixed))) {
		/*
		 * We will not allow people to write these from "the inside",
		 * Since properly selfdestructing takes too much code.  If 
		 * people really want to do this, they cannot have any
		 * providers of this geom open, and in that case they can just
		 * as easily overwrite the MBR in the parent device.
		 */
		return(EBUSY);
	}
	for (i = 0; i < NDOSPART; i++) {
		/* 
		 * A Protective MBR (PMBR) has a single partition of
		 * type 0xEE spanning the whole disk. Such a MBR
		 * protects a GPT on the disk from MBR tools that
		 * don't know anything about GPT. We're interpreting
		 * it a bit more loosely: any partition of type 0xEE
		 * is to be skipped as it doesn't contain any data
		 * that we should care about. We still allow other
		 * partitions to be present in the MBR. A PMBR will
		 * be handled correctly anyway.
		 */
		if (dp[i].dp_typ == DOSPTYP_PMBR)
			l[i] = 0;
		else if (dp[i].dp_flag != 0 && dp[i].dp_flag != 0x80)
			l[i] = 0;
		else if (dp[i].dp_typ == 0)
			l[i] = 0;
		else
			l[i] = (off_t)dp[i].dp_size * ms->sectorsize;
		error = g_slice_config(gp, i, G_SLICE_CONFIG_CHECK,
		    (off_t)dp[i].dp_start * ms->sectorsize, l[i],
		    ms->sectorsize, "%ss%d", gp->name, 1 + i);
		if (error)
			return (error);
	}
	for (i = 0; i < NDOSPART; i++) {
		ms->type[i] = dp[i].dp_typ;
		g_slice_config(gp, i, G_SLICE_CONFIG_SET,
		    (off_t)dp[i].dp_start * ms->sectorsize, l[i],
		    ms->sectorsize, "%ss%d", gp->name, 1 + i);
	}
	bcopy(sec0, ms->sec0, 512);

	/*
	 * Calculate MD5 from the first sector and use it for avoiding
	 * recursive slices creation.
	 */
	MD5Init(&md5sum);
	MD5Update(&md5sum, ms->sec0, sizeof(ms->sec0));
	MD5Final(ms->slicesum, &md5sum);

	return (0);
}
开发者ID:JabirTech,项目名称:Source,代码行数:80,代码来源:geom_mbr.c


示例7: main


//.........这里部分代码省略.........
   else current=argv[i];
 
   if (current[0]==0) continue;
   if (current[0]=='-' && !input_from_file) continue;
 
   if (setjmp(jerr.setjmp_buffer)) {
      jpeg_abort_decompress(&cinfo);
      fclose(infile);
      if (list_mode && quiet_mode < 2) printf(" %s",current);
      if (quiet_mode < 2) printf(" [ERROR]\n");
      if (delete_mode) delete_file(current,verbose_mode,quiet_mode);
      continue;
   }

   if ((infile=fopen(current,"r"))==NULL) {
     if (!quiet_mode) fprintf(stderr, "jpeginfo: can't open '%s'\n", current);
     continue;
   }
   if (is_dir(infile)) {
     fclose(infile);
     if (verbose_mode) printf("directory: %s  skipped\n",current); 
     continue;
   }

   fs=filesize(infile);

   if (md5_mode) {
     md5buf=malloc(fs);
     if (!md5buf) no_memory();
     fread(md5buf,1,fs,infile);
     rewind(infile);
     
     MD5Init(MD5);
     MD5Update(MD5,md5buf,fs);
     MD5Final(digest,MD5);
     md2str(digest,digest_text);

     free(md5buf);
   }

   if (!list_mode && quiet_mode < 2) printf("%s ",current);

   global_error_counter=0;
   err_count=jerr.pub.num_warnings;
   if (com_mode) jpeg_save_markers(&cinfo, JPEG_COM, 0xffff);
   jpeg_save_markers(&cinfo, EXIF_JPEG_MARKER, 0xffff);
   jpeg_stdio_src(&cinfo, infile);
   jpeg_read_header(&cinfo, TRUE); 

   /* check for Exif marker */
   exif_marker=NULL;
   cmarker=cinfo.marker_list;
   while (cmarker) {
     if (cmarker->marker == EXIF_JPEG_MARKER) {
       if (!memcmp(cmarker->data,EXIF_IDENT_STRING,6)) exif_marker=cmarker;
     }
     cmarker=cmarker->next;
   }   

   if (quiet_mode < 2) {
     printf("%4d x %-4d %2dbit ",(int)cinfo.image_width,
            (int)cinfo.image_height,(int)cinfo.num_components*8);

     if (exif_marker) printf("Exif  ");
     else if (cinfo.saw_JFIF_marker) printf("JFIF  ");
     else if (cinfo.saw_Adobe_marker) printf("Adobe ");
开发者ID:finyael,项目名称:WebcamDownload,代码行数:67,代码来源:jpeginfo.c


示例8: main

int main (int argc, char *argv[])
{
	unsigned int       i;
	unsigned int       n = 0;
	unsigned int       size = 0;
	struct MD5Context  md5c;
	unsigned char      digest[16];
	uint32_t bit32sum = 0;
	uint32_t * pointer_to_buf = (uint32_t *)buf;

	if (parse_args (argc, argv))
		if (!opt_quiet)
			usage();

	/* Initialize MD5 module: */
	MD5Init(&md5c);


	/* Open input and output files: ******************************/
	if (opt_stdin)
		infile = stdin;
	else
		infile = fopen (opt_filename, "r");

	if (infile == NULL) {
		fprintf (stderr, "FATAL: could not open %s\n", opt_filename);
		exit(1);
	}

	if (!opt_quiet) {
		fprintf (stderr, "uCimage file:            \"%s\"\n",
				 opt_filename);
	}

	/* Read various header data: ***************************/

	/* Read header and image file to output, compute MD5: ******/
	/* read header: */
	fread (&header, sizeof(header), 1, infile);

	/* Check magic in header */
	for (i=0;i<sizeof(header.magic);i++) {
		if (header.magic[i] != UCHEADER_MAGIC[i]) {
			fprintf (stderr, "Header magic not: \"%s\" instead: \"%s\"\n",
					 UCHEADER_MAGIC, header.magic);
			/* optionally abort? */
			break;
		}
	}

	/**** to do: largely respond to header version in the interpretation! ***/

	/* read header size */
	DBG ("header_size reported as: %10d\n", header.header_size);

	/* image size: */
	fprintf (stdout, "data_size reported as:   %10d\n", header.data_size);

	/* image size: */
	fprintf (stdout, "partition reported as:   %c\n", header.partition);

	/* header date code */
	fprintf (stdout, "date code reported as:    \"%s\"\n", header.datecode);

	/* header name */
	fprintf (stdout, "name reported as:         \"%s\"\n", header.name);

	/* MD5: */
	fprintf (stdout, "MD5 digest reported as:   ");
	for (i=0;i<16;i++)
		fprintf (stdout, "%02x", header.md5sum[i]);
	fprintf (stdout, "\n");

	/* 32Bit checksum: */
	fprintf (stdout, "32 bit checksum reported as:0x%8x\n", header.bit32sum);

	/* read image and do MD5: */
	while (!feof(infile)) {
		n = fread (buf, 1, BUFFERSIZE, infile);
		size += n;
		MD5Update (&md5c, buf, n);

		/* 32 bit checksum */
		pointer_to_buf = (uint32_t *)buf;
		while ( (char *)pointer_to_buf - buf < n ) {
			bit32sum += htonl(*pointer_to_buf);
			pointer_to_buf++;
		}
	}
	/* save MD5: */
	MD5Final (digest, &md5c);

	if (!opt_stdin)
		fclose (infile);

	/* Verify: */
	for (i=0;i<16;i++) {
		if (header.md5sum[i] != digest[i]) {
			fprintf (stdout, "ERROR: MD5 digest mismatch\n");
			fprintf (stdout, "MD5 digest calculated as: ");
//.........这里部分代码省略.........
开发者ID:gittestusername,项目名称:uClinux,代码行数:101,代码来源:uCheader.c


示例9: main_loop


//.........这里部分代码省略.........
          if (!display_width || !display_height) {
            int display_size[2];
            if (vpx_codec_control(&decoder, VP9D_GET_DISPLAY_SIZE,
                                  display_size)) {
              // As last resort use size of first frame as display size.
              display_width = img->d_w;
              display_height = img->d_h;
            } else {
              display_width = display_size[0];
              display_height = display_size[1];
            }
          }
          scaled_img = vpx_img_alloc(NULL, VPX_IMG_FMT_I420, display_width,
                                     display_height, 16);
        }

        if (img->d_w != scaled_img->d_w || img->d_h != scaled_img->d_h) {
          vpx_image_scale(img, scaled_img, kFilterBox);
          img = scaled_img;
        }
      }

      if (single_file) {
        if (use_y4m) {
          char buf[Y4M_BUFFER_SIZE] = {0};
          size_t len = 0;
          if (frame_out == 1) {
            // Y4M file header
            len = y4m_write_file_header(buf, sizeof(buf),
                                        vpx_input_ctx.width,
                                        vpx_input_ctx.height,
                                        &vpx_input_ctx.framerate, img->fmt);
            if (do_md5) {
              MD5Update(&md5_ctx, (md5byte *)buf, (unsigned int)len);
            } else {
              fputs(buf, outfile);
            }
          }

          // Y4M frame header
          len = y4m_write_frame_header(buf, sizeof(buf));
          if (do_md5) {
            MD5Update(&md5_ctx, (md5byte *)buf, (unsigned int)len);
          } else {
            fputs(buf, outfile);
          }
        }

        if (do_md5) {
          update_image_md5(img, planes, &md5_ctx);
        } else {
          write_image_file(img, planes, outfile);
        }
      } else {
        generate_filename(outfile_pattern, outfile_name, PATH_MAX,
                          img->d_w, img->d_h, frame_in);
        if (do_md5) {
          MD5Init(&md5_ctx);
          update_image_md5(img, planes, &md5_ctx);
          MD5Final(md5_digest, &md5_ctx);
          print_md5(md5_digest, outfile_name);
        } else {
          outfile = open_outfile(outfile_name);
          write_image_file(img, planes, outfile);
          fclose(outfile);
        }
开发者ID:Eric013,项目名称:videoconverter.js,代码行数:67,代码来源:vpxdec.c


示例10: cfg_auth_login

bool cfg_auth_login(struct cfg_state *cmd, char *args)
{
	unsigned char		secret[20] = "TheTalamasca", c, challenge[16];
	unsigned int		i,r;
	struct MD5Context	md5;
	int			fields = countfields(args);

	/* Require a username */
	if (fields != 1 ||
		!copyfield(args, 1, cmd->user, sizeof(cmd->user)))
	{
		sock_printf(cmd->sock, "400 The command is: login <username>\n");
		return false;
	}

	/*
	 * Check that the username is in lower case
	 * and contains only ascii
	 */
	for (i=0; i < strlen(cmd->user); i++)
	{
		if (	cmd->user[i] < 'a' ||
			cmd->user[i] > 'z')
		{
			sock_printf(cmd->sock, "400 Username contains unacceptable characters\n");
			return false;
		}
	}

	/* Clear out the secret */
	memset(secret, 0, sizeof(secret));

	/* Randomize the string */
	for (i=0; i < (sizeof(secret)-1); i++)
	{
		/* Pick random number between 1 and 62 */
		r = (random() % 63) + 1;

		/* [ 1,10] => [0,9] */
		if (r < 11)		c = (r+48-1);
		/* [11,36] => [A,Z] */
		else if (r < 37)	c = (r+65-10);
		/* [37,62] => [a,z] */
		else			c = (r+97-36);

		/* Randomize */
		secret[i] = c;
	}

	/* Generate a MD5 */
	MD5Init(&md5);
	MD5Update(&md5, (const unsigned char *)&secret, (unsigned int)strlen((const char *)&secret));
	MD5Final(challenge, &md5);

	memset(&cmd->challenge, 0, sizeof(cmd->challenge));

	/* Generate the Digest */
        for (i = 0; i < sizeof(challenge); i++)
        {
                snprintf(&cmd->challenge[i*2], 3, "%02x", challenge[i]);
        }

	/* Return the challenge to the client */
	sock_printf(cmd->sock, "200 %s\n", cmd->challenge);

	/* Upgrade the level */
	cmd->level = LEVEL_LOGIN;

	return true;
}
开发者ID:massar,项目名称:talamasca,代码行数:70,代码来源:config.c


示例11: eap_sm_parseEapReq

static void eap_sm_parseEapReq(struct eap_sm *sm, u8 *req, size_t len)
{
	struct eap_hdr *hdr;
	size_t plen;
	MD5_CTX context;

	sm->rxReq = sm->rxSuccess = sm->rxFailure = FALSE;
	sm->reqId = 0;
	sm->reqMethod = EAP_TYPE_NONE;

	if (req == NULL || len < sizeof(*hdr))
		return;

	hdr = (struct eap_hdr *) req;
	plen = be_to_host16(hdr->length);
	if (plen > len) {
		wpa_printf(MSG_DEBUG, "EAP: Ignored truncated EAP-Packet "
			   "(len=%lu plen=%lu)",
			   (unsigned long) len, (unsigned long) plen);
		return;
	}

	sm->reqId = hdr->identifier;

	if (sm->workaround) {
		MD5Init(&context);
		MD5Update(&context, req, len);
		MD5Final(sm->req_md5, &context);
	}

	switch (hdr->code) {
	case EAP_CODE_REQUEST:
		sm->rxReq = TRUE;
		if (plen > sizeof(*hdr))
			sm->reqMethod = *((u8 *) (hdr + 1));
		wpa_printf(MSG_DEBUG, "EAP: Received EAP-Request method=%d "
			   "id=%d", sm->reqMethod, sm->reqId);
		break;
	case EAP_CODE_RESPONSE:
		if (sm->selectedMethod == EAP_TYPE_LEAP) {
			sm->rxResp = TRUE;
			if (plen > sizeof(*hdr))
				sm->reqMethod = *((u8 *) (hdr + 1));
			wpa_printf(MSG_DEBUG, "EAP: Received EAP-Response for "
				   "LEAP method=%d id=%d",
				   sm->reqMethod, sm->reqId);
			break;
		}
		wpa_printf(MSG_DEBUG, "EAP: Ignored EAP-Response");
		break;
	case EAP_CODE_SUCCESS:
		wpa_printf(MSG_DEBUG, "EAP: Received EAP-Success");
		sm->rxSuccess = TRUE;
		break;
	case EAP_CODE_FAILURE:
		wpa_printf(MSG_DEBUG, "EAP: Received EAP-Failure");
		sm->rxFailure = TRUE;
		break;
	default:
		wpa_printf(MSG_DEBUG, "EAP: Ignored EAP-Packet with unknown "
			   "code %d", hdr->code);
		break;
	}
}
开发者ID:vutukurikishore,项目名称:wpa_supplicant,代码行数:64,代码来源:eap.c


示例12: profile_setup

/*******************************************************************
  open the profiling shared memory area
  ******************************************************************/
bool profile_setup(struct messaging_context *msg_ctx, bool rdonly)
{
	unsigned char tmp[16] = {};
	MD5_CTX md5;
	char *db_name;

	if (smbprofile_state.internal.db != NULL) {
		return true;
	}

	db_name = cache_path("smbprofile.tdb");
	if (db_name == NULL) {
		return false;
	}

	smbprofile_state.internal.db = tdb_wrap_open(
		NULL, db_name, 0,
		rdonly ? 0 : TDB_CLEAR_IF_FIRST|TDB_MUTEX_LOCKING,
		O_CREAT | (rdonly ? O_RDONLY : O_RDWR), 0644);
	if (smbprofile_state.internal.db == NULL) {
		return false;
	}

	if (msg_ctx != NULL) {
		messaging_register(msg_ctx, NULL, MSG_PROFILE,
				   profile_message);
		messaging_register(msg_ctx, NULL, MSG_REQ_PROFILELEVEL,
				   reqprofile_message);
	}

	MD5Init(&md5);

	MD5Update(&md5,
		  (const uint8_t *)&smbprofile_state.stats.global,
		  sizeof(smbprofile_state.stats.global));

#define __UPDATE(str) do { \
	MD5Update(&md5, (const uint8_t *)str, strlen(str)); \
} while(0)
#define SMBPROFILE_STATS_START
#define SMBPROFILE_STATS_SECTION_START(name, display) do { \
	__UPDATE(#name "+" #display); \
} while(0);
#define SMBPROFILE_STATS_COUNT(name) do { \
	__UPDATE(#name "+count"); \
} while(0);
#define SMBPROFILE_STATS_TIME(name) do { \
	__UPDATE(#name "+time"); \
} while(0);
#define SMBPROFILE_STATS_BASIC(name) do { \
	__UPDATE(#name "+count"); \
	__UPDATE(#name "+time"); \
} while(0);
#define SMBPROFILE_STATS_BYTES(name) do { \
	__UPDATE(#name "+count"); \
	__UPDATE(#name "+time"); \
	__UPDATE(#name "+idle"); \
	__UPDATE(#name "+bytes"); \
} while(0);
#define SMBPROFILE_STATS_IOBYTES(name) do { \
	__UPDATE(#name "+count"); \
	__UPDATE(#name "+time"); \
	__UPDATE(#name "+idle"); \
	__UPDATE(#name "+inbytes"); \
	__UPDATE(#name "+outbytes"); \
} while(0);
#define SMBPROFILE_STATS_SECTION_END
#define SMBPROFILE_STATS_END
	SMBPROFILE_STATS_ALL_SECTIONS
#undef __UPDATE
#undef SMBPROFILE_STATS_START
#undef SMBPROFILE_STATS_SECTION_START
#undef SMBPROFILE_STATS_COUNT
#undef SMBPROFILE_STATS_TIME
#undef SMBPROFILE_STATS_BASIC
#undef SMBPROFILE_STATS_BYTES
#undef SMBPROFILE_STATS_IOBYTES
#undef SMBPROFILE_STATS_SECTION_END
#undef SMBPROFILE_STATS_END

	MD5Final(tmp, &md5);

	profile_p = &smbprofile_state.stats.global;

	profile_p->magic = BVAL(tmp, 0);
	if (profile_p->magic == 0) {
		profile_p->magic = BVAL(tmp, 8);
	}

	return True;
}
开发者ID:abartlet,项目名称:samba-old,代码行数:94,代码来源:profile.c


示例13: hmac_md5_update

/***********************************************************************
 update hmac_md5 "inner" buffer
***********************************************************************/
_PUBLIC_ void hmac_md5_update(const uint8_t *text, int text_len, HMACMD5Context *ctx)
{
        MD5Update(&ctx->ctx, text, text_len); /* then text of datagram */
}
开发者ID:arthur-zhang,项目名称:android_samba,代码行数:7,代码来源:hmacmd5.c


示例14: Radius_msg_verify

int Radius_msg_verify(struct radius_msg *msg, u8 *secret, size_t secret_len, struct radius_msg *sent_msg)
{
	u8 auth[MD5_MAC_LEN], orig[MD5_MAC_LEN];
	u8 orig_authenticator[16];
	struct radius_attr_hdr *attr = NULL;
	int i;
	MD5_CTX context;
	u8 hash[MD5_MAC_LEN];

	if (sent_msg == NULL)
	{
		DBGPRINT(RT_DEBUG_ERROR,"No matching Access-Request message found\n");
		return 1;
	}

	for (i = 0; i < msg->attr_used; i++)
	{
		if (msg->attrs[i]->type == RADIUS_ATTR_MESSAGE_AUTHENTICATOR)
		{
			if (attr != 0)
			{
				DBGPRINT(RT_DEBUG_ERROR,"Multiple Message-Authenticator attributes in RADIUS message\n");
				return 1;
			}
			attr = msg->attrs[i];
		}
	}

	if (attr == NULL)
	{
		DBGPRINT(RT_DEBUG_ERROR,"No Message-Authenticator attribute found\n");
		return 1;
	}

	memcpy(orig, attr + 1, MD5_MAC_LEN);
	memset(attr + 1, 0, MD5_MAC_LEN);
	memcpy(orig_authenticator, msg->hdr->authenticator, sizeof(orig_authenticator));
	memcpy(msg->hdr->authenticator, sent_msg->hdr->authenticator, sizeof(msg->hdr->authenticator));
	hmac_md5(secret, secret_len, msg->buf, msg->buf_used, auth);
	memcpy(attr + 1, orig, MD5_MAC_LEN);
	memcpy(msg->hdr->authenticator, orig_authenticator, sizeof(orig_authenticator));

	if (memcmp(orig, auth, MD5_MAC_LEN) != 0)
	{
		DBGPRINT(RT_DEBUG_ERROR,"Invalid Message-Authenticator!\n");
		return 1;
	}

	/* ResponseAuth = MD5(Code+ID+Length+RequestAuth+Attributes+Secret) */
	MD5Init(&context);
	MD5Update(&context, (u8 *) msg->hdr, 1 + 1 + 2);
	MD5Update(&context, sent_msg->hdr->authenticator, MD5_MAC_LEN);
	MD5Update(&context, (u8 *) (msg->hdr + 1), msg->buf_used - sizeof(*msg->hdr));
	MD5Update(&context, secret, secret_len);
	MD5Final(hash, &context);
	if (memcmp(hash, msg->hdr->authenticator, MD5_MAC_LEN) != 0)
	{
		DBGPRINT(RT_DEBUG_ERROR,"Response Authenticator invalid!\n");
		return 1;
	}
	return 0;

}
开发者ID:warwolf558,项目名称:RT5350,代码行数:63,代码来源:radius.c


示例15: ssh_protocol

static void ssh_protocol(unsigned char *in, int inlen, int ispkt) {
    int i, j, len;
    unsigned char session_id[16];
    unsigned char *rsabuf, *keystr1, *keystr2;
    unsigned char cookie[8];
    struct RSAKey servkey, hostkey;
    struct MD5Context md5c;
    unsigned long supported_ciphers_mask;
    int cipher_type;

    extern struct ssh_cipher ssh_3des;
    extern struct ssh_cipher ssh_blowfish;

    crBegin;

    random_init();

    while (!ispkt)
	crReturnV;

    if (pktin.type != 2)
	fatalbox("Public key packet not received");

    memcpy(cookie, pktin.body, 8);

    MD5Init(&md5c);

    i = makekey(pktin.body+8, &servkey, &keystr1);

    j = makekey(pktin.body+8+i, &hostkey, &keystr2);

    supported_ciphers_mask = (pktin.body[12+i+j] << 24) |
                             (pktin.body[13+i+j] << 16) |
                             (pktin.body[14+i+j] << 8) |
                             (pktin.body[15+i+j]);

    MD5Update(&md5c, keystr2, hostkey.bytes);
    MD5Update(&md5c, keystr1, servkey.bytes);
    MD5Update(&md5c, pktin.body, 8);

    MD5Final(session_id, &md5c);

    for (i=0; i<32; i++)
	session_key[i] = random_byte();

    len = (hostkey.bytes > servkey.bytes ? hostkey.bytes : servkey.bytes);

    rsabuf = malloc(len);
    if (!rsabuf)
	fatalbox("Out of memory");

    verify_ssh_host_key(savedhost, &hostkey);

    for (i=0; i<32; i++) {
	rsabuf[i] = session_key[i];
	if (i < 16)
	    rsabuf[i] ^= session_id[i];
    }

    if (hostkey.bytes > servkey.bytes) {
	rsaencrypt(rsabuf, 32, &servkey);
	rsaencrypt(rsabuf, servkey.bytes, &hostkey);
    } else {
	rsaencrypt(rsabuf, 32, &hostkey);
	rsaencrypt(rsabuf, hostkey.bytes, &servkey);
    }

    cipher_type = cfg.cipher == CIPHER_BLOWFISH ? SSH_CIPHER_BLOWFISH :
                  SSH_CIPHER_3DES;
    if ((supported_ciphers_mask & (1 << cipher_type)) == 0) {
	c_write("Selected cipher not supported, falling back to 3DES\r\n", 53);
	cipher_type = SSH_CIPHER_3DES;
    }

    s_wrpkt_start(3, len+15);
    pktout.body[0] = cipher_type;
    memcpy(pktout.body+1, cookie, 8);
    pktout.body[9] = (len*8) >> 8;
    pktout.body[10] = (len*8) & 0xFF;
    memcpy(pktout.body+11, rsabuf, len);
    pktout.body[len+11] = pktout.body[len+12] = 0;   /* protocol flags */
    pktout.body[len+13] = pktout.body[len+14] = 0;
    s_wrpkt();

    free(rsabuf);

    cipher = cipher_type == SSH_CIPHER_BLOWFISH ? &ssh_blowfish :
             &ssh_3des;
    cipher->sesskey(session_key);

    do { crReturnV; } while (!ispkt);

    if (pktin.type != 14)
	fatalbox("Encryption not successfully enabled");

    fflush(stdout);
    {
	static char username[100];
	static int pos = 0;
	static char c;
//.........这里部分代码省略.........
开发者ID:rdebath,项目名称:sgt,代码行数:101,代码来源:ssh.c


示例16: decrypt_ms_key

static u8 * decrypt_ms_key(u8 *key, size_t len, struct radius_msg *sent_msg,
			   u8 *secret, size_t secret_len, size_t *reslen)
{
	u8 *pos, *plain, *ppos, *res;
	size_t left, plen;
	u8 hash[MD5_MAC_LEN];
	MD5_CTX context;
	int i, first = 1;

	/* key: 16-bit salt followed by encrypted key info */

	if (len < 2 + 16)
		return NULL;

	pos = key + 2;
	left = len - 2;
	if (left % 16)
	{
		DBGPRINT(RT_DEBUG_ERROR,"Invalid ms key len\n");
		return NULL;
	}

	plen = left;
	ppos = plain = malloc(plen);
	if (plain == NULL)
		return NULL;

	while (left > 0)
	{
		/* b(1) = MD5(Secret + Request-Authenticator + Salt)
		 * b(i) = MD5(Secret + c(i - 1)) for i > 1 */

		MD5Init(&context);
		MD5Update(&context, secret, secret_len);
		if (first)
		{
			MD5Update(&context, sent_msg->hdr->authenticator,
				  MD5_MAC_LEN);
			MD5Update(&context, key, 2); /* Salt */
			first = 0;
		} else
			MD5Update(&context, pos - MD5_MAC_LEN, MD5_MAC_LEN);
		MD5Final(hash, &context);

		for (i = 0; i < MD5_MAC_LEN; i++)
			*ppos++ = *pos++ ^ hash[i];
		left -= MD5_MAC_LEN;
	}

	if (plain[0] > plen - 1)
	{
		DBGPRINT(RT_DEBUG_ERROR,"Failed to decrypt MPPE key\n");
		free(plain);
		return NULL;
	}

	res = malloc(plain[0]);
	if (res == NULL)
	{
		free(plain);
		return NULL;
	}
	memcpy(res, plain + 1, plain[0]);
	if (reslen)
		*reslen = plain[0];
	free(plain);
	return res;
}
开发者ID:warwolf558,项目名称:RT5350,代码行数:68,代码来源:radius.c


示例17: cli_credentials_get_ntlm_response


//.........这里部分代码省略.........
		
		if (!SMBNTLMv2encrypt_hash(mem_ctx,
					   user, 
					   domain, 
					   nt_hash->hash, &challenge, 
					   server_timestamp, &target_info,
					   &lm_response, &nt_response, 
					   NULL, &session_key)) {
			return NT_STATUS_NO_MEMORY;
		}

		/* LM Key is incompatible... */
		*flags &= ~CLI_CRED_LANMAN_AUTH;
		if (lm_response.length != 0) {
			/*
			 * We should not expose the lm key.
			 */
			memset(lm_response.data, 0, lm_response.length);
		}
	} else if (*flags & CLI_CRED_NTLM2) {
		MD5_CTX md5_session_nonce_ctx;
		uint8_t session_nonce[16];
		uint8_t session_nonce_hash[16];
		uint8_t user_session_key[16];
		
		lm_response = data_blob_talloc(mem_ctx, NULL, 24);
		generate_random_buffer(lm_response.data, 8);
		memset(lm_response.data+8, 0, 16);

		memcpy(session_nonce, challenge.data, 8);
		memcpy(&session_nonce[8], lm_response.data, 8);
	
		MD5Init(&md5_session_nonce_ctx);
		MD5Update(&md5_session_nonce_ctx, challenge.data, 8);
		MD5Update(&md5_session_nonce_ctx, lm_response.data, 8);
		MD5Final(session_nonce_hash, &md5_session_nonce_ctx);

		DEBUG(5, ("NTLMSSP challenge set by NTLM2\n"));
		DEBUG(5, ("challenge is: \n"));
		dump_data(5, session_nonce_hash, 8);
		
		nt_response = data_blob_talloc(mem_ctx, NULL, 24);
		SMBOWFencrypt(nt_hash->hash,
			      session_nonce_hash,
			      nt_response.data);
		
		session_key = data_blob_talloc(mem_ctx, NULL, 16);

		SMBsesskeygen_ntv1(nt_hash->hash, user_session_key);
		hmac_md5(user_session_key, session_nonce, sizeof(session_nonce), session_key.data);
		dump_data_pw("NTLM2 session key:\n", session_key.data, session_key.length);

		/* LM Key is incompatible... */
		*flags &= ~CLI_CRED_LANMAN_AUTH;
	} else {
		uint8_t lm_hash[16];
		nt_response = data_blob_talloc(mem_ctx, NULL, 24);
		SMBOWFencrypt(nt_hash->hash, challenge.data,
			      nt_response.data);
		
		session_key = data_blob_talloc(mem_ctx, NULL, 16);
		SMBsesskeygen_ntv1(nt_hash->hash, session_key.data);
		dump_data_pw("NT session key:\n", session_key.data, session_key.length);

		/* lanman auth is insecure, it may be disabled.  
		   We may also not have a password */
开发者ID:GSam,项目名称:samba,代码行数:67,代码来源:credentials_ntlm.c


示例18: tcp_time_wait_processing


//.........这里部分代码省略.........
						tcp_time_wait_append(tcp);
						TCP_DBGSTAT(tcps,
						    tcp_rput_time_wait);
					}
				} else {
					ASSERT(tcp != NULL);
					TCP_TIMER_RESTART(tcp,
					    tcps->tcps_time_wait_interval);
				}
				tcp_xmit_ctl(NULL, tcp, tcp->tcp_snxt,
				    tcp->tcp_rnxt, TH_ACK);
				goto done;
			}
			flags |=  TH_ACK_NEEDED;
			seg_len = 0;
			goto process_ack;
		}

		/* Fix seg_seq, and chew the gap off the front. */
		seg_seq = tcp->tcp_rnxt;
	}

	if ((flags & TH_SYN) && gap > 0 && rgap < 0) {
		/*
		 * Make sure that when we accept the connection, pick
		 * an ISS greater than (tcp_snxt + ISS_INCR/2) for the
		 * old connection.
		 *
		 * The next ISS generated is equal to tcp_iss_incr_extra
		 * + ISS_INCR/2 + other components depending on the
		 * value of tcp_strong_iss.  We pre-calculate the new
		 * ISS here and compare with tcp_snxt to 

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ MD5_Final函数代码示例发布时间:2022-05-30
下一篇:
C++ MD5Init函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap