C++ MENU_ITEM函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MENU_ITEM函数的典型用法代码示例。如果您正苦于以下问题：C++ MENU_ITEM函数的具体用法？C++ MENU_ITEM怎么用？C++ MENU_ITEM使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MENU_ITEM函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: lcd_preheat_menu

static void lcd_preheat_menu()
{
    START_MENU();
        
    
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
    
    MENU_ITEM(function, "ABS  -  " STRINGIFY(ABS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ABS_PREHEAT_HPB_TEMP), lcd_preheat_abs);
    MENU_ITEM(function, "PLA  -  " STRINGIFY(PLA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PLA_PREHEAT_HPB_TEMP), lcd_preheat_pla);
    MENU_ITEM(function, "PET  -  " STRINGIFY(PET_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PET_PREHEAT_HPB_TEMP), lcd_preheat_pet);
    MENU_ITEM(function, "HIPS -  " STRINGIFY(HIPS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(HIPS_PREHEAT_HPB_TEMP), lcd_preheat_hips);
    MENU_ITEM(function, "PP   -  " STRINGIFY(PP_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PP_PREHEAT_HPB_TEMP), lcd_preheat_pp);
    MENU_ITEM(function, "FLEX -  " STRINGIFY(FLEX_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FLEX_PREHEAT_HPB_TEMP), lcd_preheat_flex);
    
   
    MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);

    END_MENU();
}

开发者ID:thisismud，项目名称:Prusa-i3-Plus，代码行数:19，代码来源:ultralcd.cpp

示例2: lcd_prepare_menu

static void lcd_prepare_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
#ifdef SDSUPPORT
    //MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
#endif
    MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
    MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
    //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
    MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla);
    MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs);
    MENU_ITEM(gcode, MSG_COOLDOWN, PSTR("M104 S0\nM140 S0"));
    MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
    END_MENU();
}

开发者ID:ahathoor，项目名称:DefaPrintteri，代码行数:16，代码来源:ultralcd.cpp

示例3: lcd_control_menu

static void lcd_control_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
    MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
    MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
#ifdef FWRETRACT
    MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu);
#endif
#ifdef EEPROM_SETTINGS
    MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
    MENU_ITEM(function, MSG_LOAD_EPROM, Config_RetrieveSettings);
#endif
    MENU_ITEM(function, MSG_RESTORE_FAILSAFE, Config_ResetDefault);
    END_MENU();
}

开发者ID:ahathoor，项目名称:DefaPrintteri，代码行数:16，代码来源:ultralcd.cpp

示例4: lcd_control_retract_menu

static void lcd_control_retract_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
    MENU_ITEM_EDIT(bool, MSG_AUTORETRACT, &autoretract_enabled);
    MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT, &retract_length, 0, 100);
	#if EXTRUDERS > 1
      MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_SWAP, &retract_length_swap, 0, 100);
    #endif
    MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &retract_feedrate, 1, 999);
    MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_ZLIFT, &retract_zlift, 0, 999);
    MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER, &retract_recover_length, 0, 100);
	#if EXTRUDERS > 1
      MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER_SWAP, &retract_recover_length_swap, 0, 100);
    #endif
    MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate, 1, 999);
    END_MENU();
}

开发者ID:ADVALAIN596，项目名称:MM1，代码行数:18，代码来源:ultralcd.cpp

示例5: lcd_prepare_menu

static void lcd_prepare_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
#ifdef SDSUPPORT
    //MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
#endif
    MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
    MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
    //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
    MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla);
    MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs);
    MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
#if PS_ON_PIN > -1
    if (powersupply)
    {
        MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
    }else{
        MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
    }
#endif
    MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
    END_MENU();
}

开发者ID:AllenMcAfee，项目名称:Marlin-mUVe1-Running，代码行数:24，代码来源:ultralcd.cpp

示例6: lcd_tune_menu

static void lcd_tune_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
    MENU_ITEM_EDIT(int3, MSG_SPEED, &feedmultiply, 10, 999);
    MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
#if TEMP_SENSOR_1 != 0
    MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_2 != 0
    MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0
    MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
#endif
    MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
    MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999);
    END_MENU();
}

开发者ID:peter6960，项目名称:OpenHardwarecozaFirmwares，代码行数:19，代码来源:ultralcd.cpp

示例7: lcd_control_menu

static void lcd_control_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
    MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
#ifndef DISABLE_LCD_MOTION_MENU
    MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
#endif
#ifdef DOGLCD
//    MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63);
    MENU_ITEM(submenu, MSG_CONTRAST, lcd_set_contrast);
#endif
#ifdef FWRETRACT
    MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu);
#endif
#ifdef EEPROM_SETTINGS
    MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
    MENU_ITEM(function, MSG_LOAD_EPROM, Config_RetrieveSettings);
#endif
    MENU_ITEM(function, MSG_RESTORE_FAILSAFE, Config_ResetDefault);
    END_MENU();
}

开发者ID:Fifty-Nine，项目名称:Marlin，代码行数:22，代码来源:ultralcd.cpp

示例8: lcd_control_temperature_menu

static void lcd_control_temperature_menu()
{
#ifdef PIDTEMP
    // set up temp variables - undo the default scaling
    raw_Ki = unscalePID_i(Ki);
    raw_Kd = unscalePID_d(Kd);
#endif

    START_MENU();
    MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
	//Rapduch
    //MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
/*#if TEMP_SENSOR_1 != 0
    MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
*#endif
/*#if TEMP_SENSOR_2 != 0
    MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
#endif*/
#if TEMP_SENSOR_BED != 0
    MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
#endif
    MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
#ifdef AUTOTEMP
    MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
    MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15);
    MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15);
    MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0);
#endif
#ifdef PIDTEMP
    MENU_ITEM_EDIT(float52, MSG_PID_P, &Kp, 1, 9990);
    // i is typically a small value so allows values below 1
    MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i);
    MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d);
# ifdef PID_ADD_EXTRUSION_RATE
    MENU_ITEM_EDIT(float3, MSG_PID_C, &Kc, 1, 9990);
# endif//PID_ADD_EXTRUSION_RATE
#endif//PIDTEMP
    //MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu);
    //MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu);
    END_MENU();
}

开发者ID:BCN3D，项目名称:Paste-Extruder-Firmware，代码行数:41，代码来源:ultralcd.cpp

示例9: lcd_support_menu

static void lcd_support_menu()
{
    START_MENU();
        
    
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
    
    MENU_ITEM(back, MSG_FW_VERSION " - " FW_version, lcd_main_menu);
    MENU_ITEM(back, "prusa3d.com", lcd_main_menu);
    MENU_ITEM(back, "forum.prusa3d.com", lcd_main_menu);
    MENU_ITEM(back, "howto.prusa3d.com", lcd_main_menu);
    MENU_ITEM(back, "Rev: " REVISION, lcd_main_menu);

    END_MENU();
}

开发者ID:thisismud，项目名称:Prusa-i3-Plus，代码行数:15，代码来源:ultralcd.cpp

示例10: lcd_control_motion_menu

static void lcd_control_motion_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
    MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 500, 99000);
    MENU_ITEM_EDIT(float3, MSG_VXY_JERK, &max_xy_jerk, 1, 990);
    MENU_ITEM_EDIT(float3, MSG_VMAX MSG_X, &max_feedrate[X_AXIS], 1, 999);
    MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Y, &max_feedrate[Y_AXIS], 1, 999);
    MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Z, &max_feedrate[Z_AXIS], 1, 999);
    MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &max_feedrate[E_AXIS], 1, 999);
    MENU_ITEM_EDIT(float3, MSG_VMIN, &minimumfeedrate, 0, 999);
    MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &mintravelfeedrate, 0, 999);
    MENU_ITEM_EDIT(long5, MSG_AMAX MSG_X, &max_acceleration_units_per_sq_second[X_AXIS], 100, 99000);
    MENU_ITEM_EDIT(long5, MSG_AMAX MSG_Y, &max_acceleration_units_per_sq_second[Y_AXIS], 100, 99000);
    MENU_ITEM_EDIT(long5, MSG_AMAX MSG_Z, &max_acceleration_units_per_sq_second[Z_AXIS], 100, 99000);
    MENU_ITEM_EDIT(long5, MSG_AMAX MSG_E, &max_acceleration_units_per_sq_second[E_AXIS], 100, 99000);
    MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &retract_acceleration, 100, 99000);
    MENU_ITEM_EDIT(float52, MSG_XSTEPS, &axis_steps_per_unit[X_AXIS], 5, 9999);
    MENU_ITEM_EDIT(float52, MSG_YSTEPS, &axis_steps_per_unit[Y_AXIS], 5, 9999);
    MENU_ITEM_EDIT(float51, MSG_ZSTEPS, &axis_steps_per_unit[Z_AXIS], 5, 9999);
    MENU_ITEM_EDIT(float51, MSG_ESTEPS, &axis_steps_per_unit[E_AXIS], 5, 9999);    
    END_MENU();
}

开发者ID:Godsplan，项目名称:FoldaRap2，代码行数:23，代码来源:ultralcd.cpp

示例11: lcd_preheat_pla_menu

static void lcd_preheat_pla_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
    MENU_ITEM(function, MSG_PREHEAT_PLA0, lcd_preheat_pla0);
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
    MENU_ITEM(function, MSG_PREHEAT_PLA1, lcd_preheat_pla1);
#endif //2 extruder preheat
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
    MENU_ITEM(function, MSG_PREHEAT_PLA2, lcd_preheat_pla2);
#endif //3 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat
    MENU_ITEM(function, MSG_PREHEAT_PLA012, lcd_preheat_pla012);
#endif //2 extruder preheat
#if TEMP_SENSOR_BED != 0
    MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly);
#endif
    END_MENU();
}

开发者ID:elmarnitsche，项目名称:Firmware-Playground，代码行数:19，代码来源:ultralcd.cpp

示例12: lcd_preheat_abs_menu

static void lcd_preheat_abs_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
    MENU_ITEM(function, MSG_PREHEAT_ABS0, lcd_preheat_abs0);
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
    MENU_ITEM(function, MSG_PREHEAT_ABS1, lcd_preheat_abs1);
#endif //2 extruder preheat
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
    MENU_ITEM(function, MSG_PREHEAT_ABS2, lcd_preheat_abs2);
#endif //3 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat
    MENU_ITEM(function, MSG_PREHEAT_ABS012, lcd_preheat_abs012);
#endif //2 extruder preheat
#if TEMP_SENSOR_BED != 0
    MENU_ITEM(function, MSG_PREHEAT_ABS_BEDONLY, lcd_preheat_abs_bedonly);
#endif
    END_MENU();
}

开发者ID:elmarnitsche，项目名称:Firmware-Playground，代码行数:19，代码来源:ultralcd.cpp

示例13: lcd_prepare_menu

static void lcd_prepare_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
#ifdef SDSUPPORT
    //MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
#endif
    MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
    MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
	MENU_ITEM(function, MSG_PREHEAT_BED, lcd_preheat_bed);
    //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
	//Rapduch
    //MENU_ITEM(submenu, MSG_PREHEAT, lcd_preheat_menu);
    MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
	//----
    //
   // MENU_ITEM(submenu,MSG_CHANGE,lcd_change_menu);
    MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
    END_MENU();
}

开发者ID:BCN3D，项目名称:Paste-Extruder-Firmware，代码行数:20，代码来源:ultralcd.cpp

示例14: menu_temperature

void menu_temperature() {
  START_MENU();
  MENU_BACK(MSG_MAIN);

  //
  // Nozzle:
  // Nozzle [1-5]:
  //
  #if HOTENDS == 1
    MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - 15, thermalManager.start_watching_E0);
  #else // HOTENDS > 1
    #define EDIT_TARGET(N) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_LCD_N##N, &thermalManager.temp_hotend[N].target, 0, HEATER_##N##_MAXTEMP - 15, thermalManager.start_watching_E##N)
    EDIT_TARGET(0);
    EDIT_TARGET(1);
    #if HOTENDS > 2
      EDIT_TARGET(2);
      #if HOTENDS > 3
        EDIT_TARGET(3);
        #if HOTENDS > 4
          EDIT_TARGET(4);
          #if HOTENDS > 5
            EDIT_TARGET(5);
          #endif // HOTENDS > 5
        #endif // HOTENDS > 4
      #endif // HOTENDS > 3
    #endif // HOTENDS > 2
  #endif // HOTENDS > 1

  #if ENABLED(SINGLENOZZLE)
    MENU_MULTIPLIER_ITEM_EDIT(uint16_3, MSG_NOZZLE_STANDBY, &singlenozzle_temp[active_extruder ? 0 : 1], 0, HEATER_0_MAXTEMP - 15);
  #endif

  //
  // Bed:
  //
  #if HAS_HEATED_BED
    MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_BED, &thermalManager.temp_bed.target, 0, BED_MAXTEMP - 10, thermalManager.start_watching_bed);
  #endif

  //
  // Chamber:
  //
  #if HAS_HEATED_CHAMBER
    MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_CHAMBER, &thermalManager.temp_chamber.target, 0, CHAMBER_MAXTEMP - 5, thermalManager.start_watching_chamber);
  #endif

  //
  // Fan Speed:
  //
  #if FAN_COUNT > 0
    #if HAS_FAN0
      MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(uint8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.lcd_tmpfan_speed[0], 0, 255, thermalManager.lcd_setFanSpeed0);
      #if ENABLED(EXTRA_FAN_SPEED)
        MENU_MULTIPLIER_ITEM_EDIT(uint8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.new_fan_speed[0], 3, 255);
      #endif
    #endif
    #if HAS_FAN1 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 1)
      MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(uint8, MSG_FAN_SPEED " 2", &thermalManager.lcd_tmpfan_speed[1], 0, 255, thermalManager.lcd_setFanSpeed1);
      #if ENABLED(EXTRA_FAN_SPEED)
        MENU_MULTIPLIER_ITEM_EDIT(uint8, MSG_EXTRA_FAN_SPEED " 2", &thermalManager.new_fan_speed[1], 3, 255);
      #endif
    #endif
    #if HAS_FAN2 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 2)
      MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(uint8, MSG_FAN_SPEED " 3", &thermalManager.lcd_tmpfan_speed[2], 0, 255, thermalManager.lcd_setFanSpeed2);
      #if ENABLED(EXTRA_FAN_SPEED)
        MENU_MULTIPLIER_ITEM_EDIT(uint8, MSG_EXTRA_FAN_SPEED " 3", &thermalManager.new_fan_speed[2], 3, 255);
      #endif
    #endif
  #endif // FAN_COUNT > 0

  #if HAS_TEMP_HOTEND

    //
    // Cooldown
    //
    bool has_heat = false;
    HOTEND_LOOP() if (thermalManager.temp_hotend[HOTEND_INDEX].target) { has_heat = true; break; }
    #if HAS_TEMP_BED
      if (thermalManager.temp_bed.target) has_heat = true;
    #endif
    if (has_heat) MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);

    //
    // Preheat for Material 1 and 2
    //
    #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || TEMP_SENSOR_5 != 0 || HAS_HEATED_BED
      MENU_ITEM(submenu, MSG_PREHEAT_1, menu_preheat_m1);
      MENU_ITEM(submenu, MSG_PREHEAT_2, menu_preheat_m2);
    #else
      MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0_only);
      MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only);
    #endif

  #endif // HAS_TEMP_HOTEND

  #if ENABLED(SPINDLE_LASER_ENABLE)
    MENU_ITEM(submenu, MSG_LASER_MENU, menu_spindle_laser);
  #endif

  END_MENU();
//.........这里部分代码省略.........

开发者ID:szymonrychu，项目名称:Marlin，代码行数:101，代码来源:menu_temperature.cpp

示例15: lcd_prepare_menu

static void lcd_prepare_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
#ifdef SDSUPPORT
    #ifdef MENU_ADDAUTOSTART
      MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
    #endif
#endif
    MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
    MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
    //MENU_ITEM(function, MSG_SET_HOME_OFFSETS, lcd_set_home_offsets);
    //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
#if TEMP_SENSOR_0 != 0
  #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_BED != 0
    MENU_ITEM(submenu, MSG_PREHEAT_PLA, lcd_preheat_pla_menu);
    MENU_ITEM(submenu, MSG_PREHEAT_ABS, lcd_preheat_abs_menu);
  #else
    MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla0);
    MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0);
  #endif
#endif
    MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
#if PS_ON_PIN > -1
    if (powersupply)
    {
        MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
    }else{
        MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
    }
#endif
    MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
    END_MENU();
}

开发者ID:ADVALAIN596，项目名称:MM1，代码行数:34，代码来源:ultralcd.cpp

示例16: MENU_ITEM

/*
** Opens the context menu in given coordinates.
*/
void ContextMenu::ShowMenu(POINT pos, Skin* skin)
{
	static const MenuTemplate s_Menu[] =
	{
		MENU_ITEM(IDM_MANAGE, ID_STR_MANAGE),
		MENU_ITEM(IDM_ABOUT, ID_STR_ABOUT),
		MENU_ITEM(IDM_SHOW_HELP, ID_STR_HELP),
		MENU_SEPARATOR(),
		MENU_SUBMENU(ID_STR_SKINS,
			MENU_ITEM(IDM_OPENSKINSFOLDER, ID_STR_OPENFOLDER),
			MENU_ITEM(IDM_DISABLEDRAG, ID_STR_DISABLEDRAGGING),
			MENU_SEPARATOR(),
			MENU_ITEM_GRAYED(0, ID_STR_NOSKINS)),
		MENU_SUBMENU(ID_STR_FAVORITES,
			MENU_ITEM_GRAYED(0, ID_STR_NOFAVORITES)),
		MENU_SUBMENU(ID_STR_THEMES,
			MENU_ITEM_GRAYED(0, ID_STR_NOTHEMES)),
		MENU_SEPARATOR(),
		MENU_ITEM(IDM_EDITCONFIG, ID_STR_EDITSETTINGS),
		MENU_ITEM(IDM_REFRESH, ID_STR_REFRESHALL),
		MENU_SEPARATOR(),
		MENU_SUBMENU(ID_STR_LOGGING,
			MENU_ITEM(IDM_SHOWLOGFILE, ID_STR_SHOWLOGFILE),
			MENU_SEPARATOR(),
			MENU_ITEM(IDM_STARTLOG, ID_STR_STARTLOGGING),
			MENU_ITEM(IDM_STOPLOG, ID_STR_STOPLOGGING),
			MENU_SEPARATOR(),
			MENU_ITEM(IDM_DELETELOGFILE, ID_STR_DELETELOGFILE),
			MENU_ITEM(IDM_DEBUGLOG, ID_STR_DEBUGMODE)),
		MENU_SEPARATOR(),
		MENU_ITEM(IDM_QUIT, ID_STR_EXIT)
	};

	if (m_MenuActive || (skin && skin->IsClosing())) return;

	// Show context menu, if no actions were executed
	HMENU menu = MenuTemplate::CreateMenu(s_Menu, _countof(s_Menu), GetString);
	if (!menu) return;

	m_MenuActive = true;
	Rainmeter& rainmeter = GetRainmeter();

	SetMenuDefaultItem(menu, IDM_MANAGE, MF_BYCOMMAND);

	if (_waccess(GetLogger().GetLogFilePath().c_str(), 0) == -1)
	{
		EnableMenuItem(menu, IDM_SHOWLOGFILE, MF_BYCOMMAND | MF_GRAYED);
		EnableMenuItem(menu, IDM_DELETELOGFILE, MF_BYCOMMAND | MF_GRAYED);
		EnableMenuItem(menu, IDM_STOPLOG, MF_BYCOMMAND | MF_GRAYED);
	}
	else
	{
		EnableMenuItem(
			menu,
			(GetLogger().IsLogToFile()) ? IDM_STARTLOG : IDM_STOPLOG,
			MF_BYCOMMAND | MF_GRAYED);
	}

	if (rainmeter.m_Debug)
	{
		CheckMenuItem(menu, IDM_DEBUGLOG, MF_BYCOMMAND | MF_CHECKED);
	}

	HMENU allSkinsMenu = GetSubMenu(menu, 4);
	if (allSkinsMenu)
	{
		if (!rainmeter.m_SkinRegistry.IsEmpty())
		{
			// "Open folder" = 0, "Disable dragging" = 1, separator = 2
			DeleteMenu(allSkinsMenu, 3, MF_BYPOSITION);  // "No skins available" menuitem
			CreateAllSkinsMenu(allSkinsMenu);
		}

		if (rainmeter.m_DisableDragging)
		{
			CheckMenuItem(allSkinsMenu, IDM_DISABLEDRAG, MF_BYCOMMAND | MF_CHECKED);
		}
	}

	HMENU favoritesMenu = GetSubMenu(menu, 5);
	if (favoritesMenu)
	{
		if (!rainmeter.m_Favorites.empty())
		{
			DeleteMenu(favoritesMenu, 0, MF_BYPOSITION);  // "No skins available" menuitem
			CreateFavoritesMenu(favoritesMenu);
		}
	}

	HMENU layoutMenu = GetSubMenu(menu, 6);
	if (layoutMenu)
	{
		if (!rainmeter.m_Layouts.empty())
		{
			DeleteMenu(layoutMenu, 0, MF_BYPOSITION);  // "No layouts available" menuitem
			CreateLayoutMenu(layoutMenu);
		}
//.........这里部分代码省略.........

开发者ID:BraxtonEveslage，项目名称:rainmeter，代码行数:101，代码来源:ContextMenu.cpp

示例17: MENU_ITEM

HMENU ContextMenu::CreateSkinMenu(MeterWindow* meterWindow, int index, HMENU menu)
{
	static const MenuTemplate s_Menu[] =
	{
		MENU_ITEM(IDM_SKIN_OPENSKINSFOLDER, 0),
		MENU_SEPARATOR(),
		MENU_SUBMENU(ID_STR_VARIANTS,
			MENU_SEPARATOR()),
		MENU_SEPARATOR(),
		MENU_SUBMENU(ID_STR_SETTINGS,
			MENU_SUBMENU(ID_STR_POSITION,
				MENU_SUBMENU(ID_STR_DISPLAYMONITOR,
					MENU_ITEM(IDM_SKIN_MONITOR_PRIMARY, ID_STR_USEDEFAULTMONITOR),
					MENU_ITEM(ID_MONITOR_FIRST, ID_STR_VIRTUALSCREEN),
					MENU_SEPARATOR(),
					MENU_SEPARATOR(),
					MENU_ITEM(IDM_SKIN_MONITOR_AUTOSELECT, ID_STR_AUTOSELECTMONITOR)),
				MENU_SEPARATOR(),
				MENU_ITEM(IDM_SKIN_VERYTOPMOST, ID_STR_STAYTOPMOST),
				MENU_ITEM(IDM_SKIN_TOPMOST, ID_STR_TOPMOST),
				MENU_ITEM(IDM_SKIN_NORMAL, ID_STR_NORMAL),
				MENU_ITEM(IDM_SKIN_BOTTOM, ID_STR_BOTTOM),
				MENU_ITEM(IDM_SKIN_ONDESKTOP, ID_STR_ONDESKTOP),
				MENU_SEPARATOR(),
				MENU_ITEM(IDM_SKIN_FROMRIGHT, ID_STR_FROMRIGHT),
				MENU_ITEM(IDM_SKIN_FROMBOTTOM, ID_STR_FROMBOTTOM),
				MENU_ITEM(IDM_SKIN_XPERCENTAGE, ID_STR_XASPERCENTAGE),
				MENU_ITEM(IDM_SKIN_YPERCENTAGE, ID_STR_YASPERCENTAGE)),
			MENU_SUBMENU(ID_STR_TRANSPARENCY,
				MENU_ITEM(IDM_SKIN_TRANSPARENCY_0, ID_STR_0PERCENT),
				MENU_ITEM(IDM_SKIN_TRANSPARENCY_10, ID_STR_10PERCENT),
				MENU_ITEM(IDM_SKIN_TRANSPARENCY_20, ID_STR_20PERCENT),
				MENU_ITEM(IDM_SKIN_TRANSPARENCY_30, ID_STR_30PERCENT),
				MENU_ITEM(IDM_SKIN_TRANSPARENCY_40, ID_STR_40PERCENT),
				MENU_ITEM(IDM_SKIN_TRANSPARENCY_50, ID_STR_50PERCENT),
				MENU_ITEM(IDM_SKIN_TRANSPARENCY_60, ID_STR_60PERCENT),
				MENU_ITEM(IDM_SKIN_TRANSPARENCY_70, ID_STR_70PERCENT),
				MENU_ITEM(IDM_SKIN_TRANSPARENCY_80, ID_STR_80PERCENT),
				MENU_ITEM(IDM_SKIN_TRANSPARENCY_90, ID_STR_90PERCENT),
				MENU_SEPARATOR(),
				MENU_ITEM(IDM_SKIN_TRANSPARENCY_FADEIN, ID_STR_FADEIN),
				MENU_ITEM(IDM_SKIN_TRANSPARENCY_FADEOUT, ID_STR_FADEOUT)),
			MENU_SEPARATOR(),
			MENU_ITEM(IDM_SKIN_HIDEONMOUSE, ID_STR_HIDEONMOUSEOVER),
			MENU_ITEM(IDM_SKIN_DRAGGABLE, ID_STR_DRAGGABLE),
			MENU_ITEM(IDM_SKIN_REMEMBERPOSITION, ID_STR_SAVEPOSITION),
			MENU_ITEM(IDM_SKIN_SNAPTOEDGES, ID_STR_SNAPTOEDGES),
			MENU_ITEM(IDM_SKIN_CLICKTHROUGH, ID_STR_CLICKTHROUGH),
			MENU_ITEM(IDM_SKIN_KEEPONSCREEN, ID_STR_KEEPONSCREEN),
			MENU_ITEM(IDM_SKIN_USED2D, ID_STR_USED2D)),
		MENU_SEPARATOR(),
		MENU_ITEM(IDM_SKIN_MANAGESKIN, ID_STR_MANAGESKIN),
		MENU_ITEM(IDM_SKIN_EDITSKIN, ID_STR_EDITSKIN),
		MENU_ITEM(IDM_SKIN_REFRESH, ID_STR_REFRESHSKIN),
		MENU_SEPARATOR(),
		MENU_ITEM(IDM_CLOSESKIN, ID_STR_UNLOADSKIN)
	};

	HMENU skinMenu = MenuTemplate::CreateMenu(s_Menu, _countof(s_Menu), GetString);
	if (!skinMenu) return nullptr;

	// Tick the position
	HMENU settingsMenu = GetSubMenu(skinMenu, 4);
	if (settingsMenu)
	{
		HMENU posMenu = GetSubMenu(settingsMenu, 0);
		if (posMenu)
		{
			const UINT checkPos = IDM_SKIN_NORMAL - (UINT)meterWindow->GetWindowZPosition();
			CheckMenuRadioItem(posMenu, checkPos, checkPos, checkPos, MF_BYCOMMAND);

			if (meterWindow->GetXFromRight()) CheckMenuItem(posMenu, IDM_SKIN_FROMRIGHT, MF_BYCOMMAND | MF_CHECKED);
			if (meterWindow->GetYFromBottom()) CheckMenuItem(posMenu, IDM_SKIN_FROMBOTTOM, MF_BYCOMMAND | MF_CHECKED);
			if (meterWindow->GetXPercentage()) CheckMenuItem(posMenu, IDM_SKIN_XPERCENTAGE, MF_BYCOMMAND | MF_CHECKED);
			if (meterWindow->GetYPercentage()) CheckMenuItem(posMenu, IDM_SKIN_YPERCENTAGE, MF_BYCOMMAND | MF_CHECKED);

			HMENU monitorMenu = GetSubMenu(posMenu, 0);
			if (monitorMenu)
			{
				CreateMonitorMenu(monitorMenu, meterWindow);
			}
		}

		// Tick the transparency
		HMENU alphaMenu = GetSubMenu(settingsMenu, 1);
		if (alphaMenu)
		{
			UINT checkPos = (UINT)(10 - meterWindow->GetAlphaValue() / 25.5);
			checkPos = min(9, checkPos);
			checkPos = max(0, checkPos);
			CheckMenuRadioItem(alphaMenu, checkPos, checkPos, checkPos, MF_BYPOSITION);

			switch (meterWindow->GetWindowHide())
			{
			case HIDEMODE_FADEIN:
				CheckMenuItem(alphaMenu, IDM_SKIN_TRANSPARENCY_FADEIN, MF_BYCOMMAND | MF_CHECKED);
				EnableMenuItem(alphaMenu, IDM_SKIN_TRANSPARENCY_FADEOUT, MF_BYCOMMAND | MF_GRAYED);
				break;

			case HIDEMODE_FADEOUT:
//.........这里部分代码省略.........

开发者ID:Crazylemon64，项目名称:rainmeter，代码行数:101，代码来源:ContextMenu.cpp

示例18: MENU_HEADER

    ICON_LIST_SYSTEM
    ICON_LIST_PET
    ICON_LIST_DEVRSUSR
    { 0xff, 0xff }
};

static const char Rsrc_VICIICache[] = "VICIIVideoCache";
static const char Rsrc_CrtcCache[] = "CrtcVideoCache";

static struct MenuVideoCache {
    RO_MenuHead head;
    RO_MenuItem item[2];
} MenuVideoCache = {
    MENU_HEADER("\\MenVCaT", 200),
    {
        MENU_ITEM("\\MenVCaVIC2"),
        MENU_ITEM_LAST("\\MenVCaCrt")
    }
};

static struct MenuDisplayVideoCache {
    disp_desc_t dd;
    const char *values[2];
} MenuDisplayVideoCache = {
    { NULL, { CONF_WIN_VIDEO, 0 },
    (RO_MenuHead*)&MenuVideoCache, 2, DISP_DESC_BITFIELD, 0 },
    { Rsrc_VICIICache, Rsrc_CrtcCache }
};

/* CBM2 keyboard names */
static char CBM2keyBusinessName[] = "Business";

开发者ID:BigBoss21X，项目名称:vice-emu，代码行数:31，代码来源:cbm2ui.c

示例19: lcd_main_menu

////iSM
static void lcd_main_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_WATCH, lcd_status_screen);
    if (movesplanned() || IS_SD_PRINTING)
    {
	   MENU_ITEM(submenu, MSG_TUNE, lcd_tune_menu);//1     
    }
#ifdef SDSUPPORT
    if (card.cardOK)
    {
        if (card.isFileOpen())
        {
            if (card.sdprinting)
                //MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause);
				MENU_ITEM(gcode, MSG_FILAMENT_CH, PSTR("M600"));
            else
                MENU_ITEM(function, MSG_RESUME_PRINT, lcd_sdcard_resume);
            MENU_ITEM(function, MSG_STOP_PRINT, lcd_sdcard_stop);
			
        }else{
            MENU_ITEM(submenu, MSG_CARD_MENU, lcd_sdcard_menu);
#if SDCARDDETECT < 1
            MENU_ITEM(gcode, MSG_CNG_SDCARD, PSTR("M21"));  // SD-card changed by user
#endif
        }
    }else{
        MENU_ITEM(submenu, MSG_NO_CARD, lcd_sdcard_menu);
#if SDCARDDETECT < 1
        MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually initialize the SD-card via user interface
#endif
    }
#endif
   if (!movesplanned() && !IS_SD_PRINTING)
	{
	MENU_ITEM(submenu, MSG_FILAMENTO, lcd_filamento_menu);//2
	MENU_ITEM(submenu, MSG_PRECALENTAR, lcd_precalentar_menu);//3
	MENU_ITEM(submenu, MSG_HERRAMIENTAS, lcd_herramientas_menu);//4
	}
 END_MENU();
}

开发者ID:Trideo，项目名称:PrintBox-Max，代码行数:42，代码来源:ultralcd.cpp

示例20: lcd_prepare_menu

static void lcd_prepare_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
#ifdef SDSUPPORT
    //MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
#endif
    MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
    MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
    //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
    MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla);
    MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs);
    MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
#if defined(EASY_LOAD) 
    MENU_ITEM(function, MSG_E_BOWDEN_LENGTH, lcd_easy_load);
    MENU_ITEM(function, MSG_R_BOWDEN_LENGTH, lcd_easy_unload);
	  MENU_ITEM(function, MSG_PURGE_XMM, lcd_purge);
	  MENU_ITEM(function, MSG_RETRACT_XMM, lcd_retract);
#endif // EASY_LOAD    
#if PS_ON_PIN > -1
    if (powersupply)
    {
        MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
    }else{
        MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
    }
#endif
    MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
    END_MENU();
}

开发者ID:T3P3，项目名称:Marlin-1，代码行数:30，代码来源:ultralcd.cpp

注：本文中的MENU_ITEM函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MENU_ITEM_EDIT函数代码示例发布时间：2022-05-30

C++ MEM_mallocN函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18222|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9658|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8173|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8450|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8420|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8405|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7392|2022-11-06

客服电话

电子邮件

C++ MENU_ITEM函数代码示例

示例1: lcd_preheat_menu

示例2: lcd_prepare_menu

示例3: lcd_control_menu

示例4: lcd_control_retract_menu

示例5: lcd_prepare_menu

示例6: lcd_tune_menu

示例7: lcd_control_menu

示例8: lcd_control_temperature_menu

示例9: lcd_support_menu

示例10: lcd_control_motion_menu

示例11: lcd_preheat_pla_menu

示例12: lcd_preheat_abs_menu

示例13: lcd_prepare_menu

示例14: menu_temperature

示例15: lcd_prepare_menu

示例16: MENU_ITEM

示例17: MENU_ITEM

示例18: MENU_HEADER

示例19: lcd_main_menu

示例20: lcd_prepare_menu

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

CVE-2022-34965

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

个体户条例实施细则，2020 最新个体工商户

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053