C++ MII_PHY_DESC函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MII_PHY_DESC函数的典型用法代码示例。如果您正苦于以下问题：C++ MII_PHY_DESC函数的具体用法？C++ MII_PHY_DESC怎么用？C++ MII_PHY_DESC使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MII_PHY_DESC函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: DRIVER_MODULE

DRIVER_MODULE(rlphy, miibus, rlphy_driver, rlphy_devclass, 0, 0);

static int	rlphy_service(struct mii_softc *, struct mii_data *, int);
static void	rlphy_status(struct mii_softc *);

/*
 * RealTek internal PHYs don't have vendor/device ID registers;
 * re(4) and rl(4) fake up a return value of all zeros.
 */
static const struct mii_phydesc rlintphys[] = {
	{ 0, 0, "RealTek internal media interface" },
	MII_PHY_END
};

static const struct mii_phydesc rlphys[] = {
	MII_PHY_DESC(REALTEK, RTL8201L),
	MII_PHY_DESC(ICPLUS, IP101),
	MII_PHY_END
};

static int
rlphy_probe(device_t dev)
{
	const char *nic;
	int rv;

	rv = mii_phy_dev_probe(dev, rlphys, BUS_PROBE_DEFAULT);
	if (rv <= 0)
		return (rv);

	nic = device_get_name(device_get_parent(device_get_parent(dev)));

开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:31，代码来源:rlphy.c

示例2: brgphy_reset

static void	brgphy_reset(struct mii_softc *);
static void	brgphy_enable_loopback(struct mii_softc *);
static void	bcm5401_load_dspcode(struct mii_softc *);
static void	bcm5411_load_dspcode(struct mii_softc *);
static void	bcm54k2_load_dspcode(struct mii_softc *);
static void	brgphy_fixup_5704_a0_bug(struct mii_softc *);
static void	brgphy_fixup_adc_bug(struct mii_softc *);
static void	brgphy_fixup_adjust_trim(struct mii_softc *);
static void	brgphy_fixup_ber_bug(struct mii_softc *);
static void	brgphy_fixup_crc_bug(struct mii_softc *);
static void	brgphy_fixup_jitter_bug(struct mii_softc *);
static void	brgphy_ethernet_wirespeed(struct mii_softc *);
static void	brgphy_jumbo_settings(struct mii_softc *, u_long);

static const struct mii_phydesc brgphys[] = {
	MII_PHY_DESC(BROADCOM, BCM5400),
	MII_PHY_DESC(BROADCOM, BCM5401),
	MII_PHY_DESC(BROADCOM, BCM5411),
	MII_PHY_DESC(BROADCOM, BCM54K2),
	MII_PHY_DESC(BROADCOM, BCM5701),
	MII_PHY_DESC(BROADCOM, BCM5703),
	MII_PHY_DESC(BROADCOM, BCM5704),
	MII_PHY_DESC(BROADCOM, BCM5705),
	MII_PHY_DESC(BROADCOM, BCM5706),
	MII_PHY_DESC(BROADCOM, BCM5714),
	MII_PHY_DESC(BROADCOM, BCM5421),
	MII_PHY_DESC(BROADCOM, BCM5750),
	MII_PHY_DESC(BROADCOM, BCM5752),
	MII_PHY_DESC(BROADCOM, BCM5780),
	MII_PHY_DESC(BROADCOM, BCM5708C),
	MII_PHY_DESC(BROADCOM2, BCM5482),

开发者ID:AmirAbrams，项目名称:haiku，代码行数:31，代码来源:brgphy.c

示例3: sizeof

static devclass_t ip1000phy_devclass;
static driver_t ip1000phy_driver = {
	"ip1000phy",
	ip1000phy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(ip1000phy, miibus, ip1000phy_driver, ip1000phy_devclass, 0, 0);

static int	ip1000phy_service(struct mii_softc *, struct mii_data *, int);
static void	ip1000phy_status(struct mii_softc *);
static void	ip1000phy_reset(struct mii_softc *);
static int	ip1000phy_mii_phy_auto(struct mii_softc *, int);

static const struct mii_phydesc ip1000phys[] = {
	MII_PHY_DESC(xxICPLUS, IP1000A),
	MII_PHY_DESC(xxICPLUS, IP1001),
	MII_PHY_END
};

static const struct mii_phy_funcs ip1000phy_funcs = {
	ip1000phy_service,
	ip1000phy_status,
	ip1000phy_reset
};

static int
ip1000phy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, ip1000phys, BUS_PROBE_DEFAULT));

开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:31，代码来源:ip1000phy.c

示例4: truephy_attach

static int	truephy_attach(device_t);
static int	truephy_probe(device_t);
static void	truephy_reset(struct mii_softc *);
static void	truephy_status(struct mii_softc *);

static device_method_t truephy_methods[] = {
	/* device interface */
	DEVMETHOD(device_probe,		truephy_probe),
	DEVMETHOD(device_attach,	truephy_attach),
	DEVMETHOD(device_detach,	mii_phy_detach),
	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
	{ 0, 0 }
};

static const struct mii_phydesc truephys[] = {
	MII_PHY_DESC(AGERE,	ET1011C),
	MII_PHY_END
};

static devclass_t truephy_devclass;

static driver_t truephy_driver = {
	"truephy",
	truephy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(truephy, miibus, truephy_driver, truephy_devclass, 0, 0);

static const struct truephy_dsp {
	uint16_t	index;

开发者ID:syedzubairahmed，项目名称:FreeBSD-7.3-dyntick，代码行数:31，代码来源:truephy.c

示例5: sizeof

static devclass_t nsphyter_devclass;

static driver_t nsphyter_driver = {
	"nsphyter",
	nsphyter_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(nsphyter, miibus, nsphyter_driver, nsphyter_devclass, 0, 0);

static int	nsphyter_service(struct mii_softc *, struct mii_data *, int);
static void	nsphyter_status(struct mii_softc *);
static void	nsphyter_reset(struct mii_softc *);

static const struct mii_phydesc nsphyters[] = {
	MII_PHY_DESC(xxNATSEMI, DP83815),
	MII_PHY_DESC(xxNATSEMI, DP83843),
	MII_PHY_DESC(xxNATSEMI, DP83847),
	MII_PHY_DESC(xxNATSEMI, DP83849),
	MII_PHY_END
};

static const struct mii_phy_funcs nsphyter_funcs = {
	nsphyter_service,
	nsphyter_status,
	nsphyter_reset
};

static int
nsphyter_probe(device_t dev)
{

开发者ID:looncraz，项目名称:haiku，代码行数:31，代码来源:nsphyter.c

示例6: sizeof

};

static devclass_t pnaphy_devclass;

static driver_t pnaphy_driver = {
	"pnaphy",
	pnaphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(pnaphy, miibus, pnaphy_driver, pnaphy_devclass, 0, 0);

static int	pnaphy_service(struct mii_softc *, struct mii_data *,int);

static const struct mii_phydesc pnaphys[] = {
	MII_PHY_DESC(yyAMD, 79c901home),
	MII_PHY_END
};

static const struct mii_phy_funcs pnaphy_funcs = {
	pnaphy_service,
	ukphy_status,
	mii_phy_reset
};

static int
pnaphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, pnaphys, BUS_PROBE_DEFAULT));
}

开发者ID:ele7enxxh，项目名称:dtrace-pf，代码行数:31，代码来源:pnaphy.c

示例7: sizeof

static driver_t atphy_driver = {
	"atphy",
	atphy_methods,
	sizeof(struct atphy_softc)
};

DRIVER_MODULE(atphy, miibus, atphy_driver, atphy_devclass, 0, 0);

static int	atphy_service(struct mii_softc *, struct mii_data *, int);
static void	atphy_status(struct mii_softc *);
static void	atphy_reset(struct mii_softc *);
static uint16_t	atphy_anar(struct ifmedia_entry *);
static int	atphy_auto(struct mii_softc *);

static const struct mii_phydesc atphys[] = {
	MII_PHY_DESC(ATHEROS, F1),
	MII_PHY_END
};

static int
atphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, atphys, BUS_PROBE_DEFAULT));
}

static int
atphy_attach(device_t dev)
{
	struct atphy_softc *asc;
	struct mii_softc *sc;

开发者ID:luciang，项目名称:haiku，代码行数:31，代码来源:atphy.c

示例8: sizeof

static devclass_t xmphy_devclass;

static driver_t xmphy_driver = {
	"xmphy",
	xmphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(xmphy, miibus, xmphy_driver, xmphy_devclass, 0, 0);

static int	xmphy_service(struct mii_softc *, struct mii_data *, int);
static void	xmphy_status(struct mii_softc *);
static int	xmphy_mii_phy_auto(struct mii_softc *);

static const struct mii_phydesc xmphys[] = {
	MII_PHY_DESC(xxJATO, BASEX),
	MII_PHY_DESC(xxXAQTI, XMACII),
	MII_PHY_END
};

static const struct mii_phy_funcs xmphy_funcs = {
	xmphy_service,
	xmphy_status,
	mii_phy_reset
};

static int
xmphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, xmphys, BUS_PROBE_DEFAULT));

开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:31，代码来源:xmphy.c

示例9: sizeof

static devclass_t qsphy_devclass;

static driver_t qsphy_driver = {
	"qsphy",
	qsphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(qsphy, miibus, qsphy_driver, qsphy_devclass, 0, 0);

static int	qsphy_service(struct mii_softc *, struct mii_data *, int);
static void	qsphy_reset(struct mii_softc *);
static void	qsphy_status(struct mii_softc *);

static const struct mii_phydesc qsphys[] = {
	MII_PHY_DESC(xxQUALSEMI, QS6612),
	MII_PHY_END
};

static const struct mii_phy_funcs qsphy_funcs = {
	qsphy_service,
	qsphy_status,
	qsphy_reset
};

static int
qsphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, qsphys, BUS_PROBE_DEFAULT));
}

开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:31，代码来源:qsphy.c

示例10: sizeof

};

static devclass_t pnaphy_devclass;

static driver_t pnaphy_driver = {
	"pnaphy",
	pnaphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(pnaphy, miibus, pnaphy_driver, pnaphy_devclass, 0, 0);

static int	pnaphy_service(struct mii_softc *, struct mii_data *,int);

static const struct mii_phydesc pnaphys[] = {
	MII_PHY_DESC(AMD, 79c978),
	MII_PHY_END
};

static int
pnaphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, pnaphys, BUS_PROBE_DEFAULT));
}

static int
pnaphy_attach(device_t dev)
{
	struct mii_softc *sc;
	struct mii_attach_args *ma;

开发者ID:syedzubairahmed，项目名称:FreeBSD-7.3-dyntick，代码行数:31，代码来源:pnaphy.c

示例11: sizeof

static devclass_t	bmtphy_devclass;

static driver_t	bmtphy_driver = {
	"bmtphy",
	bmtphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(bmtphy, miibus, bmtphy_driver, bmtphy_devclass, 0, 0);

static int	bmtphy_service(struct mii_softc *, struct mii_data *, int);
static void	bmtphy_status(struct mii_softc *);

static const struct mii_phydesc bmtphys_dp[] = {
	MII_PHY_DESC(BROADCOM, BCM4401),
	MII_PHY_DESC(BROADCOM, BCM5201),
	MII_PHY_DESC(BROADCOM, BCM5221),
	MII_PHY_END
};

static const struct mii_phydesc bmtphys_lp[] = {
	MII_PHY_DESC(BROADCOM, 3C905B),
	MII_PHY_DESC(BROADCOM, 3C905C),
	MII_PHY_END
};

static int
bmtphy_probe(device_t dev)
{
	int	rval;

开发者ID:syedzubairahmed，项目名称:FreeBSD-7.3-dyntick，代码行数:30，代码来源:bmtphy.c

示例12: DRIVER_MODULE

DRIVER_MODULE(xlphy, miibus, xlphy_driver, xlphy_devclass, 0, 0);

static int	xlphy_service(struct mii_softc *, struct mii_data *, int);
static void	xlphy_reset(struct mii_softc *);

/*
 * Some 3Com internal PHYs report zero for OUI and model, others use
 * actual values.
 * Note that the 3Com internal PHYs having OUI 0x105a and model 0 are
 * handled fine by ukphy(4); they can be isolated and don't require
 * special treatment after reset.
 */
static const struct mii_phydesc xlphys[] = {
	{ 0, 0, "3Com internal media interface" },
	MII_PHY_DESC(xxBROADCOM, 3C905C),
	MII_PHY_END
};

static const struct mii_phy_funcs xlphy_funcs = {
	xlphy_service,
	ukphy_status,
	xlphy_reset
};

static int
xlphy_probe(device_t dev)
{

	if (strcmp(device_get_name(device_get_parent(device_get_parent(dev))),
	    "xl") == 0)

开发者ID:edgar-pek，项目名称:PerspicuOS，代码行数:30，代码来源:xlphy.c

示例13: sizeof

	"rgephy",
	rgephy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(rgephy, miibus, rgephy_driver, rgephy_devclass, 0, 0);

static int	rgephy_service(struct mii_softc *, struct mii_data *, int);
static void	rgephy_status(struct mii_softc *);
static int	rgephy_mii_phy_auto(struct mii_softc *, int);
static void	rgephy_reset(struct mii_softc *);
static void	rgephy_loop(struct mii_softc *);
static void	rgephy_load_dspcode(struct mii_softc *);

static const struct mii_phydesc rgephys[] = {
	MII_PHY_DESC(REALTEK, RTL8169S),
	MII_PHY_DESC(REALTEK, RTL8251),
	MII_PHY_END
};

static const struct mii_phy_funcs rgephy_funcs = {
	rgephy_service,
	rgephy_status,
	rgephy_reset
};

static int
rgephy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, rgephys, BUS_PROBE_DEFAULT));

开发者ID:AmirAbrams，项目名称:haiku，代码行数:31，代码来源:rgephy.c

示例14: DRIVER_MODULE

DRIVER_MODULE(rlphy, miibus, rlphy_driver, rlphy_devclass, 0, 0);

static int	rlphy_service(struct mii_softc *, struct mii_data *, int);
static void	rlphy_status(struct mii_softc *);

/*
 * RealTek internal PHYs don't have vendor/device ID registers;
 * re(4) and rl(4) fake up a return value of all zeros.
 */
static const struct mii_phydesc rlintphys[] = {
	{ 0, 0, "RealTek internal media interface" },
	MII_PHY_END
};

static const struct mii_phydesc rlphys[] = {
	MII_PHY_DESC(yyREALTEK, RTL8201L),
	MII_PHY_DESC(REALTEK, RTL8201E),
	MII_PHY_DESC(xxICPLUS, IP101),
	MII_PHY_END
};

static const struct mii_phy_funcs rlphy_funcs = {
	rlphy_service,
	rlphy_status,
	mii_phy_reset
};

static int
rlphy_probe(device_t dev)
{
	const char *nic;

开发者ID:ele7enxxh，项目名称:dtrace-pf，代码行数:31，代码来源:rlphy.c

示例15: sizeof

static devclass_t amphy_devclass;

static driver_t amphy_driver = {
	"amphy",
	amphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(amphy, miibus, amphy_driver, amphy_devclass, 0, 0);

static int	amphy_service(struct mii_softc *, struct mii_data *, int);
static void	amphy_status(struct mii_softc *);

static const struct mii_phydesc amphys[] = {
	MII_PHY_DESC(xxDAVICOM, DM9102),
	MII_PHY_DESC(xxDAVICOM, DM9101),
	MII_PHY_DESC(yyDAVICOM, DM9101),
	MII_PHY_END
};

static const struct mii_phy_funcs amphy_funcs = {
	amphy_service,
	amphy_status,
	mii_phy_reset
};

static int
amphy_probe(device_t dev)
{

开发者ID:AhmadTux，项目名称:freebsd，代码行数:29，代码来源:amphy.c

示例16: sizeof

static driver_t ciphy_driver = {
	"ciphy",
	ciphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(ciphy, miibus, ciphy_driver, ciphy_devclass, 0, 0);

static int	ciphy_service(struct mii_softc *, struct mii_data *, int);
static void	ciphy_status(struct mii_softc *);
static void	ciphy_reset(struct mii_softc *);
static void	ciphy_fixup(struct mii_softc *);

static const struct mii_phydesc ciphys[] = {
	MII_PHY_DESC(CICADA, CS8201),
	MII_PHY_DESC(CICADA, CS8201A),
	MII_PHY_DESC(CICADA, CS8201B),
	MII_PHY_DESC(CICADA, VSC8211),
	MII_PHY_DESC(VITESSE, VSC8601),
	MII_PHY_END
};

static int
ciphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, ciphys, BUS_PROBE_DEFAULT));
}

static int

开发者ID:syedzubairahmed，项目名称:FreeBSD-7.3-dyntick，代码行数:30，代码来源:ciphy.c

示例17: sizeof

static driver_t atphy_driver = {
	"atphy",
	atphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(atphy, miibus, atphy_driver, atphy_devclass, 0, 0);

static int	atphy_service(struct mii_softc *, struct mii_data *, int);
static void	atphy_status(struct mii_softc *);
static void	atphy_reset(struct mii_softc *);
static uint16_t	atphy_anar(struct ifmedia_entry *);
static int	atphy_setmedia(struct mii_softc *, int);

static const struct mii_phydesc atphys[] = {
	MII_PHY_DESC(xxATHEROS, F1),
	MII_PHY_DESC(xxATHEROS, F1_7),
	MII_PHY_DESC(xxATHEROS, F2),
	MII_PHY_END
};

static const struct mii_phy_funcs atphy_funcs = {
	atphy_service,
	atphy_status,
	atphy_reset
};

static int
atphy_probe(device_t dev)
{

开发者ID:edgar-pek，项目名称:PerspicuOS，代码行数:30，代码来源:atphy.c

示例18: sizeof

static devclass_t nsphy_devclass;

static driver_t nsphy_driver = {
	"nsphy",
	nsphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(nsphy, miibus, nsphy_driver, nsphy_devclass, 0, 0);

static int	nsphy_service(struct mii_softc *, struct mii_data *, int);
static void	nsphy_status(struct mii_softc *);
static void	nsphy_reset(struct mii_softc *);

static const struct mii_phydesc nsphys[] = {
	MII_PHY_DESC(xxNATSEMI, DP83840),
	MII_PHY_END
};

static const struct mii_phy_funcs nsphy_funcs = {
	nsphy_service,
	nsphy_status,
	nsphy_reset
};

static int
nsphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, nsphys, BUS_PROBE_DEFAULT));
}

开发者ID:dcui，项目名称:FreeBSD-9.3_kernel，代码行数:31，代码来源:nsphy.c

示例19: sizeof

static driver_t tlphy_driver = {
	"tlphy",
	tlphy_methods,
	sizeof(struct tlphy_softc)
};

DRIVER_MODULE(tlphy, miibus, tlphy_driver, tlphy_devclass, 0, 0);

static int	tlphy_service(struct mii_softc *, struct mii_data *, int);
static int	tlphy_auto(struct tlphy_softc *);
static void	tlphy_acomp(struct tlphy_softc *);
static void	tlphy_status(struct tlphy_softc *);

static const struct mii_phydesc tlphys[] = {
	MII_PHY_DESC(xxTI, TLAN10T),
	MII_PHY_END
};

static int
tlphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, tlphys, BUS_PROBE_DEFAULT));
}

static int
tlphy_attach(device_t dev)
{
	device_t *devlist;
	struct tlphy_softc *sc;

开发者ID:syedzubairahmed，项目名称:FreeBSD-7.3-dyntick，代码行数:30，代码来源:tlphy.c

示例20: sizeof

static driver_t ciphy_driver = {
	"ciphy",
	ciphy_methods,
	sizeof(struct mii_softc)
};

DRIVER_MODULE(ciphy, miibus, ciphy_driver, ciphy_devclass, 0, 0);

static int	ciphy_service(struct mii_softc *, struct mii_data *, int);
static void	ciphy_status(struct mii_softc *);
static void	ciphy_reset(struct mii_softc *);
static void	ciphy_fixup(struct mii_softc *);

static const struct mii_phydesc ciphys[] = {
	MII_PHY_DESC(xxCICADA, CS8201),
	MII_PHY_DESC(xxCICADA, CS8201A),
	MII_PHY_DESC(xxCICADA, CS8201B),
	MII_PHY_DESC(xxCICADA, CS8204),
	MII_PHY_DESC(xxCICADA, VSC8211),
	MII_PHY_DESC(xxCICADA, VSC8221),
	MII_PHY_DESC(xxCICADA, CS8244),
	MII_PHY_DESC(xxVITESSE, VSC8601),
	MII_PHY_DESC(xxVITESSE, VSC8641),
	MII_PHY_END
};

static const struct mii_phy_funcs ciphy_funcs = {
	ciphy_service,
	ciphy_status,
	ciphy_reset

开发者ID:ChaosJohn，项目名称:freebsd，代码行数:30，代码来源:ciphy.c

注：本文中的MII_PHY_DESC函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MIN函数代码示例发布时间：2022-05-30

C++ MIDL_user_free函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18222|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9658|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8173|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8450|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8420|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8405|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7392|2022-11-06

客服电话

电子邮件

C++ MII_PHY_DESC函数代码示例

示例1: DRIVER_MODULE

示例2: brgphy_reset

示例3: sizeof

示例4: truephy_attach

示例5: sizeof

示例6: sizeof

示例7: sizeof

示例8: sizeof

示例9: sizeof

示例10: sizeof

示例11: sizeof

示例12: DRIVER_MODULE

示例13: sizeof

示例14: DRIVER_MODULE

示例15: sizeof

示例16: sizeof

示例17: sizeof

示例18: sizeof

示例19: sizeof

示例20: sizeof

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

CVE-2022-34965

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

个体户条例实施细则，2020 最新个体工商户

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053