C++ MIPS_PHYS_TO_KSEG1函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MIPS_PHYS_TO_KSEG1函数的典型用法代码示例。如果您正苦于以下问题：C++ MIPS_PHYS_TO_KSEG1函数的具体用法？C++ MIPS_PHYS_TO_KSEG1怎么用？C++ MIPS_PHYS_TO_KSEG1使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MIPS_PHYS_TO_KSEG1函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: sq_match

static int
sq_match(device_t parent, cfdata_t cf, void *aux)
{
	struct hpc_attach_args *ha = aux;

	if (strcmp(ha->ha_name, cf->cf_name) == 0) {
		vaddr_t reset, txstat;

		reset = MIPS_PHYS_TO_KSEG1(ha->ha_sh +
		    ha->ha_dmaoff + ha->hpc_regs->enetr_reset);
		txstat = MIPS_PHYS_TO_KSEG1(ha->ha_sh +
		    ha->ha_devoff + (SEEQ_TXSTAT << 2));

		if (platform.badaddr((void *)reset, sizeof(reset)))
			return 0;

		*(volatile uint32_t *)reset = 0x1;
		delay(20);
		*(volatile uint32_t *)reset = 0x0;

		if (platform.badaddr((void *)txstat, sizeof(txstat)))
			return 0;

		if ((*(volatile uint32_t *)txstat & 0xff) == TXSTAT_OLDNEW)
			return 1;
	}

	return 0;
}

开发者ID:yazshel，项目名称:netbsd-kernel，代码行数:29，代码来源:if_sq.c

示例2: dt_cninit

void
dt_cninit(void)
{

	dt_state.ds_poll = (volatile u_int *)
	    MIPS_PHYS_TO_KSEG1(XINE_REG_INTR);
	dt_state.ds_data = (volatile u_int *)
	    MIPS_PHYS_TO_KSEG1(XINE_PHYS_TC_3_START + 0x280000);
}

开发者ID:MarginC，项目名称:kame，代码行数:9，代码来源:dt.c

示例3: rtcin

static __inline uint8_t
rtcin(uint8_t addr)
{

	*((volatile uint8_t *)
	    MIPS_PHYS_TO_KSEG1(MALTA_PCI0_ADDR(MALTA_RTCADR))) = addr;
	return (*((volatile uint8_t *)
	    MIPS_PHYS_TO_KSEG1(MALTA_PCI0_ADDR(MALTA_RTCDAT))));
}

开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:9，代码来源:malta_machdep.c

示例4: writertc

static __inline void
writertc(uint8_t addr, uint8_t val)
{

	*((volatile uint8_t *)
	    MIPS_PHYS_TO_KSEG1(MALTA_PCI0_ADDR(MALTA_RTCADR))) = addr;
	*((volatile uint8_t *)
	    MIPS_PHYS_TO_KSEG1(MALTA_PCI0_ADDR(MALTA_RTCDAT))) = val;
}

开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:9，代码来源:malta_machdep.c

示例5: dec_3maxplus_init

void
dec_3maxplus_init(void)
{
	uint32_t prodtype;

	platform.iobus = "tcbus";
	platform.bus_reset = dec_3maxplus_bus_reset;
	platform.cons_init = dec_3maxplus_cons_init;
	platform.iointr = dec_3maxplus_intr;
	platform.intr_establish = dec_3maxplus_intr_establish;
	platform.memsize = memsize_bitmap;
	/* 3MAX+ has IOASIC free-running high resolution timer */
	platform.tc_init = dec_3maxplus_tc_init;

	/* clear any memory errors */
	*(volatile uint32_t *)MIPS_PHYS_TO_KSEG1(KN03_SYS_ERRADR) = 0;
	kn03_wbflush();

	ioasic_base = MIPS_PHYS_TO_KSEG1(KN03_SYS_ASIC);

	ipl_sr_map = dec_3maxplus_ipl_sr_map;

	/* calibrate cpu_mhz value */
	mc_cpuspeed(ioasic_base+IOASIC_SLOT_8_START, MIPS_INT_MASK_1);

	*(volatile uint32_t *)(ioasic_base + IOASIC_LANCE_DECODE) = 0x3;
	*(volatile uint32_t *)(ioasic_base + IOASIC_SCSI_DECODE) = 0xe;
#if 0
	*(volatile uint32_t *)(ioasic_base + IOASIC_SCC0_DECODE) = (0x10|4);
	*(volatile uint32_t *)(ioasic_base + IOASIC_SCC1_DECODE) = (0x10|6);
	*(volatile uint32_t *)(ioasic_base + IOASIC_CSR) = 0x00000f00;
#endif

	/* XXX hard-reset LANCE */
	*(volatile uint32_t *)(ioasic_base + IOASIC_CSR) |= 0x100;

	/* sanitize interrupt mask */
	kn03_tc3_imask = KN03_INTR_PSWARN;
	*(volatile uint32_t *)(ioasic_base + IOASIC_INTR) = 0;
	*(volatile uint32_t *)(ioasic_base + IOASIC_IMSK) = kn03_tc3_imask;
	kn03_wbflush();

	prodtype = *(volatile uint32_t *)MIPS_PHYS_TO_KSEG1(KN03_REG_INTR);
	prodtype &= KN03_INTR_PROD_JUMPER;
	/* the bit persists even if INTR register is assigned value 0 */
	if (prodtype)
		cpu_setmodel("DECstation 5000/%s (3MAXPLUS)",
		    (CPUISMIPS3) ? "260" : "240");
	else
		cpu_setmodel("DECsystem 5900%s (3MAXPLUS)",
		    (CPUISMIPS3) ? "-260" : "");
}

开发者ID:yazshel，项目名称:netbsd-kernel，代码行数:52，代码来源:dec_3maxplus.c

示例6: iodi_alloc_resource

static struct resource *
iodi_alloc_resource(device_t bus, device_t child, int type, int *rid,
    u_long start, u_long end, u_long count, u_int flags)
{
	struct resource *res = malloc(sizeof(*res), M_DEVBUF, M_WAITOK);
	const char *name = device_get_name(child);
	int unit;

#ifdef DEBUG
	switch (type) {
	case SYS_RES_IRQ:
		device_printf(bus, "IRQ resource - for %s %lx-%lx\n",
		    device_get_nameunit(child), start, end);
		break;

	case SYS_RES_IOPORT:
		device_printf(bus, "IOPORT resource - for %s %lx-%lx\n",
		    device_get_nameunit(child), start, end);
		break;

	case SYS_RES_MEMORY:
		device_printf(bus, "MEMORY resource - for %s %lx-%lx\n",
		    device_get_nameunit(child), start, end);
		break;
	}
#endif

	if (strcmp(name, "uart") == 0) {
		if ((unit = device_get_unit(child)) == 0) {	/* uart 0 */
			res->r_bushandle = (xlr_io_base + XLR_IO_UART_0_OFFSET);
		} else if (unit == 1) {
			res->r_bushandle = (xlr_io_base + XLR_IO_UART_1_OFFSET);
		} else
			printf("%s: Unknown uart unit\n", __FUNCTION__);

		res->r_bustag = uart_bus_space_mem;
	} else if (strcmp(name, "ehci") == 0) {
		res->r_bushandle = MIPS_PHYS_TO_KSEG1(0x1ef24000);
		res->r_bustag = rmi_pci_bus_space;
	} else if (strcmp(name, "cfi") == 0) {
		res->r_bushandle = MIPS_PHYS_TO_KSEG1(0x1c000000);
		res->r_bustag = 0;
	} else if (strcmp(name, "ata") == 0) {
		res->r_bushandle = MIPS_PHYS_TO_KSEG1(0x1d000000);
		res->r_bustag = rmi_pci_bus_space;  /* byte swapping (not really PCI) */
	}
	/* res->r_start = *rid; */
	return (res);
}

开发者ID:JabirTech，项目名称:Source，代码行数:49，代码来源:iodi.c

示例7: uart_malta_probe

static int
uart_malta_probe(device_t dev)
{
	struct uart_softc *sc;

	sc = device_get_softc(dev);
	sc->sc_sysdev = SLIST_FIRST(&uart_sysdevs);
	sc->sc_class = &uart_ns8250_class;
	bcopy(&sc->sc_sysdev->bas, &sc->sc_bas, sizeof(sc->sc_bas));
	sc->sc_sysdev->bas.bst = mips_bus_space_generic;
	sc->sc_sysdev->bas.bsh = MIPS_PHYS_TO_KSEG1(SENTRY5_UART1ADR);
	sc->sc_bas.bst = mips_bus_space_generic;
	sc->sc_bas.bsh = MIPS_PHYS_TO_KSEG1(SENTRY5_UART1ADR);
	return(uart_bus_probe(dev, 0, 0, 0, 0));
}

开发者ID:edgar-pek，项目名称:PerspicuOS，代码行数:15，代码来源:uart_bus_sbusart.c

示例8: __find_pcic

static void
__find_pcic(void)
{
	int i, j, step, found;
	u_int32_t addr;
	u_int8_t reg;
	int __read_revid (u_int32_t port) 
	    {
		    addr = MIPS_PHYS_TO_KSEG1(i + port);
		    printf("%#x\r", i);
		    for (found = 0, j = 0; j < 0x100; j += 0x40) {
			    *((volatile u_int8_t *)addr) = j;
			    reg = *((volatile u_int8_t *)(addr + 1));
#ifdef DEBUG_FIND_PCIC_I82365SL_ONLY
			    if (reg == 0x82 || reg == 0x83) {
#else
			    if ((reg & 0xc0) == 0x80) {
#endif
					    found++;
			    }
			    if (found)
				    printf("\nfound %d socket at %#x"
					"(base from %#x)\n", found, addr,
					i + port - VR_ISA_PORT_BASE);
		    }
	    }
	step = 0x1000000;
	printf("\nFinding PCIC. Trying ISA port %#x-%#x step %#x\n", 
	    VR_ISA_PORT_BASE, VR_ISA_PORT_BASE + VR_ISA_PORT_SIZE, step);
	for (i = VR_ISA_PORT_BASE; i < VR_ISA_PORT_BASE+VR_ISA_PORT_SIZE;
	    i+= step) {
		__read_revid (0x3e0);
		__read_revid (0x3e2);
	}
}

开发者ID:krytarowski，项目名称:netbsd-current-src-sys，代码行数:35，代码来源:isa_machdep.c

示例9: dec_3maxplus_errintr

/*
 * Handle Memory error. 3max, 3maxplus has ECC.
 * Correct single-bit error, panic on  double-bit error.
 * XXX on double-error on clean user page, mark bad and reload frame?
 */
static void
dec_3maxplus_errintr(void)
{
	uint32_t erradr, csr;
	vaddr_t errsyn;

	/* Fetch error address, ECC chk/syn bits, clear interrupt */
	erradr = *(volatile uint32_t *)MIPS_PHYS_TO_KSEG1(KN03_SYS_ERRADR);
	errsyn = MIPS_PHYS_TO_KSEG1(KN03_SYS_ERRSYN);
	*(volatile uint32_t *)MIPS_PHYS_TO_KSEG1(KN03_SYS_ERRADR) = 0;
	kn03_wbflush();
	csr = *(volatile uint32_t *)MIPS_PHYS_TO_KSEG1(KN03_SYS_CSR);

	/* Send to kn02/kn03 memory subsystem handler */
	dec_mtasic_err(erradr, errsyn, csr & KN03_CSR_BNK32M);
}

开发者ID:yazshel，项目名称:netbsd-kernel，代码行数:21，代码来源:dec_3maxplus.c

示例10: ar5315_get_radio_info

/*
 * Locate the radio configuration data; it is located relative to the
 * board configuration data.
 */
static const void *
ar5315_get_radio_info(void)
{
	static const void *radio = NULL;
	const struct ar531x_boarddata *board;
	const uint8_t *baddr, *ptr, *end;

	if (radio)
		goto done;

	board = ar5315_get_board_info();
	if (board == NULL)
		return NULL;
	baddr = (const uint8_t *) board;
	end = (const uint8_t *)MIPS_PHYS_TO_KSEG1(AR5315_RADIO_END);

	for (ptr = baddr + 0x1000; ptr < end; ptr += 0x1000)
		if (*(const uint32_t *)ptr != 0xffffffffU) {
			radio = ptr;
			goto done;
		}

	/* AR2316 moves radio data */
	for (ptr = baddr + 0xf8; ptr < end; ptr += 0x1000)
		if (*(const uint32_t *)ptr != 0xffffffffU) {
			radio = ptr;
			goto done;
		}

done:
	return radio;
}

开发者ID:krytarowski，项目名称:netbsd-current-src-sys，代码行数:36，代码来源:ar5315_board.c

示例11: led_display_word

void
led_display_word(uint32_t val)
{
	uint32_t *ledbar = (uint32_t *)MIPS_PHYS_TO_KSEG1(MALTA_ASCIIWORD);

	*ledbar = val;
}

开发者ID:MarginC，项目名称:kame，代码行数:7，代码来源:leds.c

示例12: led_bar

void
led_bar(uint8_t val)
{
	uint8_t *ledbar = (uint8_t *)MIPS_PHYS_TO_KSEG1(MALTA_LEDBAR);

	*ledbar = val;
}

开发者ID:MarginC，项目名称:kame，代码行数:7，代码来源:leds.c

示例13: zscninit

void
zscninit(struct consdev *cn)
{
	struct zs_chanstate *cs;

	extern const struct cdevsw zstty_cdevsw;

	cn->cn_dev = makedev(cdevsw_lookup_major(&zstty_cdevsw), 0);

	zs_cons = (uint8_t *)MIPS_PHYS_TO_KSEG1(ZS_BASE) + ZS_CHAN_A; /* XXX */

	zs_conschan = cs = &zs_conschan_store;

	/* Setup temporary chanstate. */
	cs->cs_reg_csr  = zs_cons + ZS_CSR;
	cs->cs_reg_data = zs_cons + ZS_DATA;

	/* Initialize the pending registers. */
	memcpy(cs->cs_preg, zs_init_reg, 16);
	cs->cs_preg[5] |= ZSWR5_DTR | ZSWR5_RTS;

	cs->cs_preg[12] = BPS_TO_TCONST(PCLK / 16, ZS_DEFSPEED);
	cs->cs_preg[13] = 0;
	cs->cs_defspeed = ZS_DEFSPEED;

	/* Clear the master interrupt enable. */
	zs_write_reg(cs, 9, 0);

	/* Reset the whole SCC chip. */
	zs_write_reg(cs, 9, ZSWR9_HARD_RESET);

	/* Copy "pending" to "current" and H/W */
	zs_loadchannelregs(cs);
}

开发者ID:krytarowski，项目名称:netbsd-current-src-sys，代码行数:34，代码来源:zs.c

示例14: ingenic_putchar_init

void
ingenic_putchar_init(void)
{
	/*
	 * XXX don't screw with the UART's speed until we know what clock
	 * we're on
	 */
#if 0
	int rate;
#endif
	extern int comspeed(long, long, int);

	com0addr = (uint32_t *)MIPS_PHYS_TO_KSEG1(JZ_UART0);
#if 0
	if (comcnfreq != -1) {
		rate = comspeed(comcnspeed, comcnfreq, COM_TYPE_INGENIC);
		if (rate < 0)
			return;					/* XXX */
#endif
		com0addr[com_ier] = 0;
		com0addr[com_lctl] = htole32(LCR_DLAB);
#if 0
		com0addr[com_dlbl] = htole32(rate & 0xff);
		com0addr[com_dlbh] = htole32(rate >> 8);
#endif
		com0addr[com_lctl] = htole32(LCR_8BITS);	/* XXX */
		com0addr[com_mcr]  = htole32(MCR_DTR|MCR_RTS);
		com0addr[com_fifo] = htole32(
		    FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | 
		    FIFO_TRIGGER_1 | FIFO_UART_ON);
#if 0
	}

开发者ID:krytarowski，项目名称:netbsd-current-src-sys，代码行数:32，代码来源:ingenic_com.c

示例15: mace_serial_init

static int
mace_serial_init(const char *consdev)
{
#if (NCOM > 0)
	const char     *dbaud;
	int       speed;
	u_int32_t base;

	if ((strlen(consdev) == 9) && (!strncmp(consdev, "serial", 6)) &&
	    (consdev[7] == '0' || consdev[7] == '1')) {
		/* Get comm speed from ARCS */
		dbaud = ARCBIOS->GetEnvironmentVariable("dbaud");
		speed = strtoul(dbaud, NULL, 10);
		base = (consdev[7] == '0') ? MACE_ISA_SER1_BASE :
		    MACE_ISA_SER2_BASE;

		delay(10000);

		/* XXX: hardcoded MACE iotag */
		if (comcnattach(3, MIPS_PHYS_TO_KSEG1(MACE_BASE + base),
		    speed, COM_FREQ, COM_TYPE_NORMAL, comcnmode) == 0)
			return (1);
	}
#endif

	return (0);
}

开发者ID:lacombar，项目名称:netbsd-alc，代码行数:27，代码来源:console.c

示例16: obio_attach

int
obio_attach(device_t dev)
{
	struct obio_softc *sc = device_get_softc(dev);

	sc->oba_st = MIPS_BUS_SPACE_IO;
	sc->oba_addr = MIPS_PHYS_TO_KSEG1(MALTA_UART0ADR);
	sc->oba_size = MALTA_PCIMEM3_SIZE;
	sc->oba_rman.rm_type = RMAN_ARRAY;
	sc->oba_rman.rm_descr = "OBIO I/O";
	if (rman_init(&sc->oba_rman) != 0 ||
	    rman_manage_region(&sc->oba_rman,
	    sc->oba_addr, sc->oba_addr + sc->oba_size) != 0)
		panic("obio_attach: failed to set up I/O rman");
	sc->oba_irq_rman.rm_type = RMAN_ARRAY;
	sc->oba_irq_rman.rm_descr = "OBIO IRQ";

	/* 
	 * This module is intended for UART purposes only and
	 * it's IRQ is 4
	 */
	if (rman_init(&sc->oba_irq_rman) != 0 ||
	    rman_manage_region(&sc->oba_irq_rman, 4, 4) != 0)
		panic("obio_attach: failed to set up IRQ rman");

	device_add_child(dev, "uart", 0);
	bus_generic_probe(dev);
	bus_generic_attach(dev);

	return (0);
}

开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:31，代码来源:obio.c

示例17: sbwdog_attach

static void
sbwdog_attach(device_t parent, device_t self, void *aux)
{
	struct sbwdog_softc *sc = device_private(self);
	struct sbscd_attach_args *sa = aux;

	sc->sc_dev = self;
	sc->sc_wdog_period = SBWDOG_DEFAULT_PERIOD;
	sc->sc_addr = MIPS_PHYS_TO_KSEG1(sa->sa_base + sa->sa_locs.sa_offset);

	aprint_normal(": %d second period\n", sc->sc_wdog_period);

	sc->sc_smw.smw_name = device_xname(sc->sc_dev);
	sc->sc_smw.smw_cookie = sc;
	sc->sc_smw.smw_setmode = sbwdog_setmode;
	sc->sc_smw.smw_tickle = sbwdog_tickle;
	sc->sc_smw.smw_period = sc->sc_wdog_period;

	if (sysmon_wdog_register(&sc->sc_smw) != 0)
		aprint_error_dev(self, "unable to register with sysmon\n");

	if (sa->sa_locs.sa_intr[0] != SBOBIOCF_INTR_DEFAULT)
		cpu_intr_establish(sa->sa_locs.sa_intr[0], IPL_HIGH,
		    sbwdog_intr, sc);
}

开发者ID:ryo，项目名称:netbsd-src，代码行数:25，代码来源:sbwdog.c

示例18: tx3912video_hpcfbinit

void
tx3912video_hpcfbinit(struct tx3912video_softc *sc)
{
	struct video_chip *chip = sc->sc_chip;
	struct hpcfb_fbconf *fb = &sc->sc_fbconf;
	vaddr_t fbvaddr = (vaddr_t)MIPS_PHYS_TO_KSEG1(chip->vc_fbpaddr);
	
	memset(fb, 0, sizeof(struct hpcfb_fbconf));
	
	fb->hf_conf_index	= 0;	/* configuration index		*/
	fb->hf_nconfs		= 1;   	/* how many configurations	*/
	strncpy(fb->hf_name, "TX3912 built-in video", HPCFB_MAXNAMELEN);
					/* frame buffer name		*/
	strncpy(fb->hf_conf_name, "LCD", HPCFB_MAXNAMELEN);
					/* configuration name		*/
	fb->hf_height		= chip->vc_fbheight;
	fb->hf_width		= chip->vc_fbwidth;
	fb->hf_baseaddr		= (u_long)fbvaddr;
	fb->hf_offset		= (u_long)fbvaddr -
	    mips_ptob(mips_btop(fbvaddr));
					/* frame buffer start offset   	*/
	fb->hf_bytes_per_line	= (chip->vc_fbwidth * chip->vc_fbdepth)
	    / NBBY;
	fb->hf_nplanes		= 1;
	fb->hf_bytes_per_plane	= chip->vc_fbheight * fb->hf_bytes_per_line;

	fb->hf_access_flags |= HPCFB_ACCESS_BYTE;
	fb->hf_access_flags |= HPCFB_ACCESS_WORD;
	fb->hf_access_flags |= HPCFB_ACCESS_DWORD;
	if (video_reverse_color())
		fb->hf_access_flags |= HPCFB_ACCESS_REVERSE;


	switch (chip->vc_fbdepth) {
	default:
		panic("tx3912video_hpcfbinit: not supported color depth");
		/* NOTREACHED */
	case 2:
		fb->hf_class = HPCFB_CLASS_GRAYSCALE;
		fb->hf_access_flags |= HPCFB_ACCESS_STATIC;
		fb->hf_pack_width = 8;
		fb->hf_pixels_per_pack = 4;
		fb->hf_pixel_width = 2;
		fb->hf_class_data_length = sizeof(struct hf_gray_tag);
		/* reserved for future use */
		fb->hf_u.hf_gray.hf_flags = 0;
		break;
	case 8:
		fb->hf_class = HPCFB_CLASS_INDEXCOLOR;
		fb->hf_access_flags |= HPCFB_ACCESS_STATIC;
		fb->hf_pack_width = 8;
		fb->hf_pixels_per_pack = 1;
		fb->hf_pixel_width = 8;
		fb->hf_class_data_length = sizeof(struct hf_indexed_tag);
		/* reserved for future use */
		fb->hf_u.hf_indexed.hf_flags = 0;
		break;
	}
}

开发者ID:krytarowski，项目名称:netbsd-current-src-sys，代码行数:59，代码来源:tx3912video.c

示例19: tx3912video_init

int
tx3912video_init(paddr_t fb_start, paddr_t *fb_end)
{
	struct video_chip *chip = &tx3912video_chip;
	tx_chipset_tag_t tc;
	txreg_t reg;
	int fbdepth, reverse, error;
	
	reverse = video_reverse_color();
	chip->vc_v = tc = tx_conf_get_tag();
	
	reg = tx_conf_read(tc, TX3912_VIDEOCTRL1_REG);	
	fbdepth = 1 << (TX3912_VIDEOCTRL1_BITSEL(reg));

	switch (fbdepth) {
	case 2:
		bootinfo->fb_type = reverse ? BIFB_D2_M2L_3 : BIFB_D2_M2L_0;
		break;
	case 4:
		/* XXX should implement rasops4.c */
		fbdepth = 2;
		bootinfo->fb_type = reverse ? BIFB_D2_M2L_3 : BIFB_D2_M2L_0;
		reg = tx_conf_read(tc, TX3912_VIDEOCTRL1_REG);	
		TX3912_VIDEOCTRL1_BITSEL_CLR(reg);
		reg = TX3912_VIDEOCTRL1_BITSEL_SET(reg,
		    TX3912_VIDEOCTRL1_BITSEL_2BITGREYSCALE);
		tx_conf_write(tc, TX3912_VIDEOCTRL1_REG, reg);
		break;
	case 8:
		bootinfo->fb_type = reverse ? BIFB_D8_FF : BIFB_D8_00;
		break;
	}

	chip->vc_fbdepth = fbdepth;
	chip->vc_fbwidth = bootinfo->fb_width;
	chip->vc_fbheight= bootinfo->fb_height;

	/* Allocate framebuffer area */
	error = tx3912video_framebuffer_alloc(chip, fb_start, fb_end);
	if (error != 0)
		return (1);

#if notyet 
	tx3912video_resolution_init(chip);
#else
	/* Use Windows CE setting. */
#endif
	/* Set DMA transfer address to VID module */
	tx3912video_framebuffer_init(chip);
	
	/* Syncronize framebuffer addr to frame signal */
	tx3912video_reset(chip);

	bootinfo->fb_line_bytes = (chip->vc_fbwidth * fbdepth) / NBBY;
	bootinfo->fb_addr = (void *)MIPS_PHYS_TO_KSEG1(chip->vc_fbpaddr);
	
	return (0);
}

开发者ID:krytarowski，项目名称:netbsd-current-src-sys，代码行数:58，代码来源:tx3912video.c

示例20: getsecs

satime_t
getsecs(void)
{
	volatile uint8_t *mcclock_reg, *mcclock_data;
	u_int sec;

	mcclock_reg  = (void *)MIPS_PHYS_TO_KSEG1(MCCLOCK_BASE + MCCLOCK_REG);
	mcclock_data = (void *)MIPS_PHYS_TO_KSEG1(MCCLOCK_BASE + MCCLOCK_DATA);

	*mcclock_reg = MC_SEC;
	sec  = bcdtobin(*mcclock_data);
	*mcclock_reg = MC_MIN;
	sec += bcdtobin(*mcclock_data) * 60;
	*mcclock_reg = MC_HOUR;
	sec += bcdtobin(*mcclock_data) * 60 * 60;

	return (satime_t)sec;
}

开发者ID:krytarowski，项目名称:netbsd-current-src-sys，代码行数:18，代码来源:clock.c

注：本文中的MIPS_PHYS_TO_KSEG1函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MIRSRC函数代码示例发布时间：2022-05-30

C++ MIPS_PHYS_TO_KSEG0函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18222|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9658|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8173|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8450|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8420|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8405|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7392|2022-11-06

客服电话

电子邮件

C++ MIPS_PHYS_TO_KSEG1函数代码示例

示例1: sq_match

示例2: dt_cninit

示例3: rtcin

示例4: writertc

示例5: dec_3maxplus_init

示例6: iodi_alloc_resource

示例7: uart_malta_probe

示例8: __find_pcic

示例9: dec_3maxplus_errintr

示例10: ar5315_get_radio_info

示例11: led_display_word

示例12: led_bar

示例13: zscninit

示例14: ingenic_putchar_init

示例15: mace_serial_init

示例16: obio_attach

示例17: sbwdog_attach

示例18: tx3912video_hpcfbinit

示例19: tx3912video_init

示例20: getsecs

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

CVE-2022-34965

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

个体户条例实施细则，2020 最新个体工商户

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053