本文整理汇总了C++中MLX5_SET函数的典型用法代码示例。如果您正苦于以下问题：C++ MLX5_SET函数的具体用法？C++ MLX5_SET怎么用？C++ MLX5_SET使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了MLX5_SET函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: mlx5_set_port_mtu
int mlx5_set_port_mtu(struct mlx5_core_dev *dev, u16 mtu, u8 port)
{
u32 in[MLX5_ST_SZ_DW(pmtu_reg)];
u32 out[MLX5_ST_SZ_DW(pmtu_reg)];
memset(in, 0, sizeof(in));
MLX5_SET(pmtu_reg, in, admin_mtu, mtu);
MLX5_SET(pmtu_reg, in, local_port, port);
return mlx5_core_access_reg(dev, in, sizeof(in), out,
sizeof(out), MLX5_REG_PMTU, 0, 1);
}
开发者ID:513855417，项目名称:linux，代码行数:13，代码来源:port.c
示例2: mlx5_modify_nic_vport_mac_list
int mlx5_modify_nic_vport_mac_list(struct mlx5_core_dev *dev,
enum mlx5_list_type list_type,
u8 addr_list[][ETH_ALEN],
int list_size)
{
u32 out[MLX5_ST_SZ_DW(modify_nic_vport_context_out)] = {0};
void *nic_vport_ctx;
int max_list_size;
int in_sz;
void *in;
int err;
int i;
max_list_size = list_type == MLX5_NIC_VPORT_LIST_TYPE_UC ?
1 << MLX5_CAP_GEN(dev, log_max_current_uc_list) :
1 << MLX5_CAP_GEN(dev, log_max_current_mc_list);
if (list_size > max_list_size)
return -ENOSPC;
in_sz = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in) +
list_size * MLX5_ST_SZ_BYTES(mac_address_layout);
in = kzalloc(in_sz, GFP_KERNEL);
if (!in)
return -ENOMEM;
MLX5_SET(modify_nic_vport_context_in, in, opcode,
MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
MLX5_SET(modify_nic_vport_context_in, in,
field_select.addresses_list, 1);
nic_vport_ctx = MLX5_ADDR_OF(modify_nic_vport_context_in, in,
nic_vport_context);
MLX5_SET(nic_vport_context, nic_vport_ctx,
allowed_list_type, list_type);
MLX5_SET(nic_vport_context, nic_vport_ctx,
allowed_list_size, list_size);
for (i = 0; i < list_size; i++) {
u8 *curr_mac = MLX5_ADDR_OF(nic_vport_context,
nic_vport_ctx,
current_uc_mac_address[i]) + 2;
ether_addr_copy(curr_mac, addr_list[i]);
}
err = mlx5_cmd_exec(dev, in, in_sz, out, sizeof(out));
kfree(in);
return err;
}
开发者ID:FreeBSDFoundation，项目名称:freebsd，代码行数:51，代码来源:mlx5_vport.c
示例3: _mlx5_query_vport_state
static int _mlx5_query_vport_state(struct mlx5_core_dev *mdev, u8 opmod,
u16 vport, u32 *out, int outlen)
{
u32 in[MLX5_ST_SZ_DW(query_vport_state_in)] = {0};
MLX5_SET(query_vport_state_in, in, opcode,
MLX5_CMD_OP_QUERY_VPORT_STATE);
MLX5_SET(query_vport_state_in, in, op_mod, opmod);
MLX5_SET(query_vport_state_in, in, vport_number, vport);
if (vport)
MLX5_SET(query_vport_state_in, in, other_vport, 1);
return mlx5_cmd_exec(mdev, in, sizeof(in), out, outlen);
}
开发者ID:Anjali05，项目名称:linux，代码行数:14，代码来源:vport.c
示例4: mlx5_core_destroy_xsrq
int mlx5_core_destroy_xsrq(struct mlx5_core_dev *dev, u32 xsrqn)
{
u32 in[MLX5_ST_SZ_DW(destroy_xrc_srq_in)];
u32 out[MLX5_ST_SZ_DW(destroy_xrc_srq_out)];
memset(in, 0, sizeof(in));
memset(out, 0, sizeof(out));
MLX5_SET(destroy_xrc_srq_in, in, opcode, MLX5_CMD_OP_DESTROY_XRC_SRQ);
MLX5_SET(destroy_xrc_srq_in, in, xrc_srqn, xsrqn);
return mlx5_cmd_exec_check_status(dev, in, sizeof(in), out,
sizeof(out));
}
开发者ID:galvinli，项目名称:ath，代码行数:14，代码来源:transobj.c
示例5: mlx5_dealloc_transport_domain
void mlx5_dealloc_transport_domain(struct mlx5_core_dev *dev, u32 tdn)
{
u32 in[MLX5_ST_SZ_DW(dealloc_transport_domain_in)];
u32 out[MLX5_ST_SZ_DW(dealloc_transport_domain_out)];
memset(in, 0, sizeof(in));
memset(out, 0, sizeof(out));
MLX5_SET(dealloc_transport_domain_in, in, opcode,
MLX5_CMD_OP_DEALLOC_TRANSPORT_DOMAIN);
MLX5_SET(dealloc_transport_domain_in, in, transport_domain, tdn);
mlx5_cmd_exec_check_status(dev, in, sizeof(in), out, sizeof(out));
}
开发者ID:Kirill2013，项目名称:kasan，代码行数:14，代码来源:transobj.c
示例6: mlx5_set_port_status
int mlx5_set_port_status(struct mlx5_core_dev *dev,
enum mlx5_port_status status)
{
u32 in[MLX5_ST_SZ_DW(paos_reg)];
u32 out[MLX5_ST_SZ_DW(paos_reg)];
memset(in, 0, sizeof(in));
MLX5_SET(paos_reg, in, admin_status, status);
MLX5_SET(paos_reg, in, ase, 1);
return mlx5_core_access_reg(dev, in, sizeof(in), out,
sizeof(out), MLX5_REG_PAOS, 0, 1);
}
开发者ID:Dyoed，项目名称:ath，代码行数:14，代码来源:port.c
示例7: mlx5_core_arm_xsrq
int mlx5_core_arm_xsrq(struct mlx5_core_dev *dev, u32 xsrqn, u16 lwm)
{
u32 in[MLX5_ST_SZ_DW(arm_xrc_srq_in)] = {0};
u32 out[MLX5_ST_SZ_DW(arm_xrc_srq_out)] = {0};
MLX5_SET(arm_xrc_srq_in, in, opcode, MLX5_CMD_OP_ARM_XRC_SRQ);
MLX5_SET(arm_xrc_srq_in, in, xrc_srqn, xsrqn);
MLX5_SET(arm_xrc_srq_in, in, lwm, lwm);
MLX5_SET(arm_xrc_srq_in, in, op_mod,
MLX5_ARM_XRC_SRQ_IN_OP_MOD_XRC_SRQ);
return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
}
开发者ID:FreeBSDFoundation，项目名称:freebsd，代码行数:14，代码来源:mlx5_transobj.c
示例8: mlx5_vport_query_q_counter
int mlx5_vport_query_q_counter(struct mlx5_core_dev *mdev,
u16 counter_set_id,
int reset,
void *out,
int out_size)
{
u32 in[MLX5_ST_SZ_DW(query_q_counter_in)] = {0};
MLX5_SET(query_q_counter_in, in, opcode, MLX5_CMD_OP_QUERY_Q_COUNTER);
MLX5_SET(query_q_counter_in, in, clear, reset);
MLX5_SET(query_q_counter_in, in, counter_set_id, counter_set_id);
return mlx5_cmd_exec(mdev, in, sizeof(in), out, out_size);
}
开发者ID:FreeBSDFoundation，项目名称:freebsd，代码行数:14，代码来源:mlx5_vport.c
示例9: mlx5_cmd_create_lag
static int mlx5_cmd_create_lag(struct mlx5_core_dev *dev, u8 remap_port1,
u8 remap_port2)
{
u32 in[MLX5_ST_SZ_DW(create_lag_in)] = {0};
u32 out[MLX5_ST_SZ_DW(create_lag_out)] = {0};
void *lag_ctx = MLX5_ADDR_OF(create_lag_in, in, ctx);
MLX5_SET(create_lag_in, in, opcode, MLX5_CMD_OP_CREATE_LAG);
MLX5_SET(lagc, lag_ctx, tx_remap_affinity_1, remap_port1);
MLX5_SET(lagc, lag_ctx, tx_remap_affinity_2, remap_port2);
return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
}
开发者ID:Anjali05，项目名称:linux，代码行数:14，代码来源:lag.c
示例10: mlx5_del_l2_table_entry_cmd
static int mlx5_del_l2_table_entry_cmd(struct mlx5_core_dev *dev, u32 index)
{
u32 in[MLX5_ST_SZ_DW(delete_l2_table_entry_in)];
u32 out[MLX5_ST_SZ_DW(delete_l2_table_entry_out)];
memset(in, 0, sizeof(in));
memset(out, 0, sizeof(out));
MLX5_SET(delete_l2_table_entry_in, in, opcode,
MLX5_CMD_OP_DELETE_L2_TABLE_ENTRY);
MLX5_SET(delete_l2_table_entry_in, in, table_index, index);
return mlx5_cmd_exec_check_status(dev, in, sizeof(in),
out, sizeof(out));
}
开发者ID:ANLAB-KAIST，项目名称:mlnx-en，代码行数:14，代码来源:en_eswitch.c
示例11: mlx5_query_nic_vport_context
static int mlx5_query_nic_vport_context(struct mlx5_core_dev *mdev, u16 vport,
u32 *out, int outlen)
{
u32 in[MLX5_ST_SZ_DW(query_nic_vport_context_in)] = {0};
MLX5_SET(query_nic_vport_context_in, in, opcode,
MLX5_CMD_OP_QUERY_NIC_VPORT_CONTEXT);
MLX5_SET(query_nic_vport_context_in, in, vport_number, vport);
if (vport)
MLX5_SET(query_nic_vport_context_in, in, other_vport, 1);
return mlx5_cmd_exec(mdev, in, sizeof(in), out, outlen);
}
开发者ID:FreeBSDFoundation，项目名称:freebsd，代码行数:14，代码来源:mlx5_vport.c
示例12: destroy_xrc_srq_cmd
static int destroy_xrc_srq_cmd(struct mlx5_core_dev *dev,
struct mlx5_core_srq *srq)
{
u32 xrcsrq_in[MLX5_ST_SZ_DW(destroy_xrc_srq_in)] = {0};
u32 xrcsrq_out[MLX5_ST_SZ_DW(destroy_xrc_srq_out)] = {0};
MLX5_SET(destroy_xrc_srq_in, xrcsrq_in, opcode,
MLX5_CMD_OP_DESTROY_XRC_SRQ);
MLX5_SET(destroy_xrc_srq_in, xrcsrq_in, xrc_srqn, srq->srqn);
MLX5_SET(destroy_xrc_srq_in, xrcsrq_in, uid, srq->uid);
return mlx5_cmd_exec(dev, xrcsrq_in, sizeof(xrcsrq_in),
xrcsrq_out, sizeof(xrcsrq_out));
}
开发者ID:ezequielgarcia，项目名称:linux，代码行数:14，代码来源:srq.c
示例13: mlx5_set_port_pfc
int mlx5_set_port_pfc(struct mlx5_core_dev *dev, u8 pfc_en_tx, u8 pfc_en_rx)
{
u32 in[MLX5_ST_SZ_DW(pfcc_reg)] = {0};
u32 out[MLX5_ST_SZ_DW(pfcc_reg)];
MLX5_SET(pfcc_reg, in, local_port, 1);
MLX5_SET(pfcc_reg, in, pfctx, pfc_en_tx);
MLX5_SET(pfcc_reg, in, pfcrx, pfc_en_rx);
MLX5_SET_TO_ONES(pfcc_reg, in, prio_mask_tx);
MLX5_SET_TO_ONES(pfcc_reg, in, prio_mask_rx);
return mlx5_core_access_reg(dev, in, sizeof(in), out,
sizeof(out), MLX5_REG_PFCC, 0, 1);
}
开发者ID:oscardagrach，项目名称:linux，代码行数:14，代码来源:port.c
示例14: set_l2table_entry_cmd
/* HW L2 Table (MPFS) management */
static int set_l2table_entry_cmd(struct mlx5_core_dev *dev, u32 index, u8 *mac)
{
u32 in[MLX5_ST_SZ_DW(set_l2_table_entry_in)] = {0};
u32 out[MLX5_ST_SZ_DW(set_l2_table_entry_out)] = {0};
u8 *in_mac_addr;
MLX5_SET(set_l2_table_entry_in, in, opcode, MLX5_CMD_OP_SET_L2_TABLE_ENTRY);
MLX5_SET(set_l2_table_entry_in, in, table_index, index);
in_mac_addr = MLX5_ADDR_OF(set_l2_table_entry_in, in, mac_address);
ether_addr_copy(&in_mac_addr[2], mac);
return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
}
开发者ID:ReneNyffenegger，项目名称:linux，代码行数:15，代码来源:mpfs.c
示例15: mlx5_modify_nic_vport_vlans
int mlx5_modify_nic_vport_vlans(struct mlx5_core_dev *dev,
u16 vlans[],
int list_size)
{
u32 out[MLX5_ST_SZ_DW(modify_nic_vport_context_out)];
void *nic_vport_ctx;
int max_list_size;
int in_sz;
void *in;
int err;
int i;
max_list_size = 1 << MLX5_CAP_GEN(dev, log_max_vlan_list);
if (list_size > max_list_size)
return -ENOSPC;
in_sz = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in) +
list_size * MLX5_ST_SZ_BYTES(vlan_layout);
memset(out, 0, sizeof(out));
in = kzalloc(in_sz, GFP_KERNEL);
if (!in)
return -ENOMEM;
MLX5_SET(modify_nic_vport_context_in, in, opcode,
MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
MLX5_SET(modify_nic_vport_context_in, in,
field_select.addresses_list, 1);
nic_vport_ctx = MLX5_ADDR_OF(modify_nic_vport_context_in, in,
nic_vport_context);
MLX5_SET(nic_vport_context, nic_vport_ctx,
allowed_list_type, MLX5_NVPRT_LIST_TYPE_VLAN);
MLX5_SET(nic_vport_context, nic_vport_ctx,
allowed_list_size, list_size);
for (i = 0; i < list_size; i++) {
void *vlan_addr = MLX5_ADDR_OF(nic_vport_context,
nic_vport_ctx,
current_uc_mac_address[i]);
MLX5_SET(vlan_layout, vlan_addr, vlan, vlans[i]);
}
err = mlx5_cmd_exec_check_status(dev, in, in_sz, out, sizeof(out));
kfree(in);
return err;
}
开发者ID:513855417，项目名称:linux，代码行数:49，代码来源:vport.c
示例16: mlx5_set_nic_vport_mc_list
int mlx5_set_nic_vport_mc_list(struct mlx5_core_dev *mdev, int vport,
u64 *addr_list, size_t addr_list_len)
{
void *in, *ctx;
int inlen = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in)
+ MLX5_ST_SZ_BYTES(mac_address_layout) * (int)addr_list_len;
int err;
size_t i;
int max_list_sz = 1 << MLX5_CAP_GEN_MAX(mdev, log_max_current_mc_list);
if ((int)addr_list_len > max_list_sz) {
mlx5_core_warn(mdev, "Requested list size (%d) > (%d) max_list_size\n",
(int)addr_list_len, max_list_sz);
return -ENOSPC;
}
in = mlx5_vzalloc(inlen);
if (!in) {
mlx5_core_warn(mdev, "failed to allocate inbox\n");
return -ENOMEM;
}
MLX5_SET(modify_nic_vport_context_in, in, vport_number, vport);
if (vport)
MLX5_SET(modify_nic_vport_context_in, in,
other_vport, 1);
MLX5_SET(modify_nic_vport_context_in, in,
field_select.addresses_list, 1);
ctx = MLX5_ADDR_OF(modify_nic_vport_context_in, in, nic_vport_context);
MLX5_SET(nic_vport_context, ctx, allowed_list_type,
MLX5_NIC_VPORT_LIST_TYPE_MC);
MLX5_SET(nic_vport_context, ctx, allowed_list_size, addr_list_len);
for (i = 0; i < addr_list_len; i++) {
u8 *mac_lout = (u8 *)MLX5_ADDR_OF(nic_vport_context, ctx,
current_uc_mac_address[i]);
u8 *mac_ptr = (u8 *)MLX5_ADDR_OF(mac_address_layout, mac_lout,
mac_addr_47_32);
ether_addr_copy(mac_ptr, (u8 *)&addr_list[i]);
}
err = mlx5_modify_nic_vport_context(mdev, in, inlen);
kvfree(in);
return err;
}
开发者ID:FreeBSDFoundation，项目名称:freebsd，代码行数:49，代码来源:mlx5_vport.c
示例17: mlx5_modify_vport_admin_state
int mlx5_modify_vport_admin_state(struct mlx5_core_dev *mdev, u8 opmod,
u16 vport, u8 other_vport, u8 state)
{
u32 in[MLX5_ST_SZ_DW(modify_vport_state_in)] = {0};
u32 out[MLX5_ST_SZ_DW(modify_vport_state_out)] = {0};
MLX5_SET(modify_vport_state_in, in, opcode,
MLX5_CMD_OP_MODIFY_VPORT_STATE);
MLX5_SET(modify_vport_state_in, in, op_mod, opmod);
MLX5_SET(modify_vport_state_in, in, vport_number, vport);
MLX5_SET(modify_vport_state_in, in, other_vport, other_vport);
MLX5_SET(modify_vport_state_in, in, admin_state, state);
return mlx5_cmd_exec(mdev, in, sizeof(in), out, sizeof(out));
}
开发者ID:Anjali05，项目名称:linux，代码行数:15，代码来源:vport.c
示例18: mlx5_set_port_pause
int mlx5_set_port_pause(struct mlx5_core_dev *dev, u32 rx_pause, u32 tx_pause)
{
u32 in[MLX5_ST_SZ_DW(pfcc_reg)];
u32 out[MLX5_ST_SZ_DW(pfcc_reg)];
int err;
memset(in, 0, sizeof(in));
MLX5_SET(pfcc_reg, in, local_port, 1);
MLX5_SET(pfcc_reg, in, pptx, tx_pause);
MLX5_SET(pfcc_reg, in, pprx, rx_pause);
err = mlx5_core_access_reg(dev, in, sizeof(in), out,
sizeof(out), MLX5_REG_PFCC, 0, 1);
return err;
}
开发者ID:c444b774，项目名称:linux，代码行数:15，代码来源:port.c
示例19: mlx5_query_port_ptys
int mlx5_query_port_ptys(struct mlx5_core_dev *dev, u32 *ptys,
int ptys_size, int proto_mask, u8 local_port)
{
u32 in[MLX5_ST_SZ_DW(ptys_reg)];
int err;
memset(in, 0, sizeof(in));
MLX5_SET(ptys_reg, in, local_port, local_port);
MLX5_SET(ptys_reg, in, proto_mask, proto_mask);
err = mlx5_core_access_reg(dev, in, sizeof(in), ptys,
ptys_size, MLX5_REG_PTYS, 0, 0);
return err;
}
开发者ID:c444b774，项目名称:linux，代码行数:15，代码来源:port.c
示例20: mlx5e_build_rq_param
static void mlx5e_build_rq_param(struct mlx5e_priv *priv,
struct mlx5e_rq_param *param)
{
void *rqc = param->rqc;
void *wq = MLX5_ADDR_OF(rqc, rqc, wq);
MLX5_SET(wq, wq, wq_type, MLX5_WQ_TYPE_LINKED_LIST);
MLX5_SET(wq, wq, end_padding_mode, MLX5_WQ_END_PAD_MODE_ALIGN);
MLX5_SET(wq, wq, log_wq_stride, ilog2(sizeof(struct mlx5e_rx_wqe)));
MLX5_SET(wq, wq, log_wq_sz, priv->params.log_rq_size);
MLX5_SET(wq, wq, pd, priv->pdn);
param->wq.numa = dev_to_node(&priv->mdev->pdev->dev);
param->wq.linear = 1;
}
开发者ID:Dyoed，项目名称:ath，代码行数:15，代码来源:en_main.c
注：本文中的MLX5_SET函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论