C++ MPIO_Err_create_code函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MPIO_Err_create_code函数的典型用法代码示例。如果您正苦于以下问题：C++ MPIO_Err_create_code函数的具体用法？C++ MPIO_Err_create_code怎么用？C++ MPIO_Err_create_code使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MPIO_Err_create_code函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ADIOI_Cache_alloc

/*
 * ADIOI_Cache_alloc - allocate space in the local file system for the cache file
 */
void ADIOI_Cache_alloc(ADIO_File fd, ADIO_Offset off, ADIO_Offset len, int *error_code)
{
    int ret;
    char myname[] = "ADIOI_CACHE_ALLOC";
    *error_code = MPI_SUCCESS;

    ret = fallocate(fd->fd_sys, 0, (off_t)off, (off_t)len);

    if (ret == -1)
        if (errno == ENOSPC)
            *error_code = MPIO_Err_create_code(MPI_SUCCESS,
					       MPIR_ERR_RECOVERABLE,
                                               myname, __LINE__,
                                               MPI_ERR_NO_SPACE, "**filenospace",
                                               "**filenospace %s", strerror(errno));
        else if (errno == EBADF)
            *error_code = MPIO_Err_create_code(MPI_SUCCESS,
                                               MPIR_ERR_RECOVERABLE,
                                               myname, __LINE__,
                                               MPI_ERR_ACCESS, "**fileaccess",
                                               "**fileaccess %s", strerror(errno));
        else if (errno == EIO)
            *error_code = MPIO_Err_create_code(MPI_SUCCESS,
                                               MPIR_ERR_RECOVERABLE,
                                               myname, __LINE__,
                                               MPI_ERR_IO, "**io",
                                               "**io %s", strerror(errno));
	/* if the system call is not supported proceed as if
	 * the allocation was successfull. We do this since
	 * it would take much more time to write zeros to the
	 * file
	 */
        /* else if( errno == ENOSYS ) */
}

开发者ID:gcongiu，项目名称:E10，代码行数:37，代码来源:adi_cache_alloc.c

示例2: handle

/*@
    MPI_File_set_size - Sets the file size

Input Parameters:
. fh - file handle (handle)
. size - size to truncate or expand file (nonnegative integer)

.N fortran
@*/
int MPI_File_set_size(MPI_File mpi_fh, MPI_Offset size)
{
    int error_code;
    ADIO_File fh;
    static char myname[] = "MPI_FILE_SET_SIZE";
    MPI_Offset tmp_sz;

#ifdef MPI_hpux
    int fl_xmpi;

    HPMP_IO_START(fl_xmpi, BLKMPIFILESETSIZE, TRDTBLOCK, fh,
		  MPI_DATATYPE_NULL, -1);
#endif /* MPI_hpux */

    MPID_CS_ENTER();
    MPIR_Nest_incr();

    fh = MPIO_File_resolve(mpi_fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(fh, myname, error_code);

    if (size < 0) {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_ARG,
					  "**iobadsize", 0);
	error_code = MPIO_Err_return_file(fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    tmp_sz = size;
    MPI_Bcast(&tmp_sz, 1, ADIO_OFFSET, 0, fh->comm);

    /* --BEGIN ERROR HANDLING-- */
    if (tmp_sz != size) {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_ARG,
					  "**notsame", 0);
	error_code = MPIO_Err_return_file(fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    ADIOI_TEST_DEFERRED(fh, "MPI_File_set_size", &error_code);

    ADIO_Resize(fh, size, &error_code);
    /* TODO: what to do with error code? */
    
#ifdef MPI_hpux
    HPMP_IO_END(fl_xmpi, fh, MPI_DATATYPE_NULL, -1);
#endif /* MPI_hpux */

fn_exit:
    MPIR_Nest_decr();
    MPID_CS_EXIT();

    return error_code;
}

开发者ID:hpc，项目名称:mvapich-cce，代码行数:68，代码来源:set_size.c

示例3: ADIOI_NTFS_aio_wait_fn

/* Wait for completion of one of the outstanding AIO requests */
int ADIOI_NTFS_aio_wait_fn(int count, void **array_of_states,
		double timeout, MPI_Status *status)
{
	int i, mpi_errno = MPI_SUCCESS;
	ADIOI_AIO_Request **aio_reqlist;
    LPHANDLE lpHandles;
    DWORD retObject=0;

    /* FIXME: Validate the args -- has it already been done by the 
       caller ? */
	aio_reqlist = (ADIOI_AIO_Request **)array_of_states;
    lpHandles = (LPHANDLE) ADIOI_Calloc(count, sizeof(HANDLE));
    if (lpHandles == NULL)
    {
	mpi_errno = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
	    "ADIOI_NTFS_aio_wait_fn", __LINE__, MPI_ERR_IO,
	    "**nomem", "**nomem %s", "Event handles");
	return mpi_errno;
    }
	/* XXX: set-up arrays of outstanding requests */
    for(i=0; i<count; i++){
        lpHandles[i] = (aio_reqlist[i])->lpOvl->hEvent;
    }

	/* XXX: wait for one request to complete */
    /* FIXME: Is the timeout in seconds ? */
    timeout = (timeout <= 0) ? INFINITE : (timeout * 1000);
    
    if((retObject = WaitForMultipleObjects(count, lpHandles,
                    FALSE, timeout)) != WAIT_FAILED){
        retObject = retObject - WAIT_OBJECT_0;
        if(GetOverlappedResult( aio_reqlist[retObject]->fd, 
                aio_reqlist[retObject]->lpOvl, &(aio_reqlist[retObject]->nbytes), 
                FALSE)){
        	/* XXX: mark completed requests as 'done'*/
            mpi_errno = MPI_Grequest_complete(aio_reqlist[retObject]->req);
    	    if (mpi_errno != MPI_SUCCESS) {
	    	    mpi_errno = MPIO_Err_create_code(MPI_SUCCESS,
				    MPIR_ERR_RECOVERABLE,
				    "ADIOI_NTFS_aio_wait_fn", __LINE__,
				    MPI_ERR_IO, "**mpi_grequest_complete",
				    0);
            }
        }else{
            if(GetLastError() == ERROR_IO_INCOMPLETE){
            /* IO in progress */
	        /* TODO: need to diddle with status somehow */
            }else{
            /* Error occured */
            /* TODO: not sure how to handle this */    
            }
        }
    }else{
        /* TODO: How to handle error while waiting ? */
    }
    ADIOI_Free(lpHandles);
	return mpi_errno;
}

开发者ID:315234，项目名称:OpenFOAM-2.2.x-OSX，代码行数:59，代码来源:ad_ntfs_iwrite.c

示例4: MPIOI_File_read_all_begin

int MPIOI_File_read_all_begin(MPI_File mpi_fh,
			      MPI_Offset offset,
			      int file_ptr_type,
			      void *buf,
			      int count,
			      MPI_Datatype datatype,
			      char *myname)
{
    int error_code, datatype_size;
    ADIO_File fh;

    MPID_CS_ENTER();
    MPIR_Nest_incr();

    fh = MPIO_File_resolve(mpi_fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(fh, myname, error_code);
    MPIO_CHECK_COUNT(fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(fh, datatype, myname, error_code);

    if (file_ptr_type == ADIO_EXPLICIT_OFFSET && offset < 0)
    {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_ARG,
					  "**iobadoffset", 0);
	error_code = MPIO_Err_return_file(fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */
    
    MPI_Type_size(datatype, &datatype_size);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_READABLE(fh, myname, error_code);
    MPIO_CHECK_NOT_SEQUENTIAL_MODE(fh, myname, error_code);

    if (fh->split_coll_count) {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_IO, 
					  "**iosplitcoll", 0);
	error_code = MPIO_Err_return_file(fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    fh->split_coll_count = 1;

    ADIO_ReadStridedColl(fh, buf, count, datatype, file_ptr_type,
			 offset, &fh->split_status, &error_code);
fn_exit:
    MPIR_Nest_decr();
    MPID_CS_EXIT();

    return error_code;
}

开发者ID:hpc，项目名称:mvapich-cce，代码行数:57，代码来源:read_allb.c

示例5: build_cb_config_list

static int build_cb_config_list(ADIO_File fd, 
	MPI_Comm orig_comm, MPI_Comm comm, 
	int rank, int procs, int *error_code)
{
    ADIO_cb_name_array array;
    int *tmp_ranklist;
    int rank_ct;
    char *value;
    static char myname[] = "ADIO_OPEN cb_config_list";

    /* gather the processor name array if we don't already have it */
    /* this has to be done early in ADIO_Open so that we can cache the name
     * array in both the dup'd communicator (in case we want it later) and the
     * original communicator */
    ADIOI_cb_gather_name_array(orig_comm, comm, &array);

/* parse the cb_config_list and create a rank map on rank 0 */
    if (rank == 0) {
	tmp_ranklist = (int *) ADIOI_Malloc(sizeof(int) * procs);
	if (tmp_ranklist == NULL) {
	    *error_code = MPIO_Err_create_code(*error_code,
					       MPIR_ERR_RECOVERABLE,
					       myname,
					       __LINE__,
					       MPI_ERR_OTHER,
					       "**nomem2",0);
	    return 0;
	}

	rank_ct = ADIOI_cb_config_list_parse(fd->hints->cb_config_list, 
					     array, tmp_ranklist,
					     fd->hints->cb_nodes);

	/* store the ranklist using the minimum amount of memory */
	if (rank_ct > 0) {
	    fd->hints->ranklist = (int *) ADIOI_Malloc(sizeof(int) * rank_ct);
	    memcpy(fd->hints->ranklist, tmp_ranklist, sizeof(int) * rank_ct);
	}
	ADIOI_Free(tmp_ranklist);
	fd->hints->cb_nodes = rank_ct;
	/* TEMPORARY -- REMOVE WHEN NO LONGER UPDATING INFO FOR FS-INDEP. */
	value = (char *) ADIOI_Malloc((MPI_MAX_INFO_VAL+1)*sizeof(char));
	MPL_snprintf(value, MPI_MAX_INFO_VAL+1, "%d", rank_ct);
	ADIOI_Info_set(fd->info, "cb_nodes", value);
	ADIOI_Free(value);
    }

    ADIOI_cb_bcast_rank_map(fd);
    if (fd->hints->cb_nodes <= 0) {
	*error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					   myname, __LINE__, MPI_ERR_IO,
					   "**ioagnomatch", 0);
	fd = ADIO_FILE_NULL;
    }
    return 0;
}

开发者ID:michael-chuvelev，项目名称:mpich，代码行数:56，代码来源:ad_open.c

示例6: ADIOI_PANFS_ReadContig

void ADIOI_PANFS_ReadContig(ADIO_File fd, void *buf, int count,
			  MPI_Datatype datatype, int file_ptr_type,
			  ADIO_Offset offset, ADIO_Status *status,
			  int *error_code)
{
    MPI_Count err = -1, datatype_size, len;
    static char myname[] = "ADIOI_PANFS_READCONTIG";

    MPI_Type_size_x(datatype, &datatype_size);
    len = datatype_size * count;

    if (file_ptr_type == ADIO_INDIVIDUAL) {
	offset = fd->fp_ind;
    }

    if (fd->fp_sys_posn != offset) {
	err = lseek(fd->fd_sys, offset, SEEK_SET);
	/* --BEGIN ERROR HANDLING-- */
	if (err == -1) {
	    *error_code = MPIO_Err_create_code(MPI_SUCCESS,
					       MPIR_ERR_RECOVERABLE,
					       myname, __LINE__,
					       MPI_ERR_IO, "**io",
					       "**io %s", strerror(errno));
	    fd->fp_sys_posn = -1;
	    return;
	}
	/* --END ERROR HANDLING-- */
    }

    AD_PANFS_RETRY(read(fd->fd_sys, buf, len),err)
    /* --BEGIN ERROR HANDLING-- */
    if (err == -1) {
	*error_code = MPIO_Err_create_code(MPI_SUCCESS,
					   MPIR_ERR_RECOVERABLE,
					   myname, __LINE__,
					   MPI_ERR_IO, "**io",
					   "**io %s", strerror(errno));
	fd->fp_sys_posn = -1;
	return;
    }
    /* --END ERROR HANDLING-- */

    fd->fp_sys_posn = offset + err;

    if (file_ptr_type == ADIO_INDIVIDUAL) {
	fd->fp_ind += err;
    }

#ifdef HAVE_STATUS_SET_BYTES
    if (err != -1) MPIR_Status_set_bytes(status, datatype, err);
#endif

    *error_code = MPI_SUCCESS;
}

开发者ID:00datman，项目名称:ompi，代码行数:55，代码来源:ad_panfs_read.c

示例7: ADIOI_PVFS2_Delete

void ADIOI_PVFS2_Delete(const char *filename, int *error_code)
{
    PVFS_credentials credentials;
    PVFS_sysresp_getparent resp_getparent;
    int ret;
    PVFS_fs_id cur_fs;
    static char myname[] = "ADIOI_PVFS2_DELETE";
    char pvfs_path[PVFS_NAME_MAX] = {0};

    ADIOI_PVFS2_Init(error_code);
    /* --BEGIN ERROR HANDLING-- */
    if (*error_code != MPI_SUCCESS) 
    {
	/* ADIOI_PVFS2_INIT handles creating error codes itself */
	return;
    }
    /* --END ERROR HANDLING-- */

    /* in most cases we'll store the credentials in the fs struct, but we don't
     * have one of those in Delete  */
    ADIOI_PVFS2_makecredentials(&credentials);

    /* given the filename, figure out which pvfs filesystem it is on */
    ret = PVFS_util_resolve(filename, &cur_fs, pvfs_path, PVFS_NAME_MAX);
    /* --BEGIN ERROR HANDLING-- */
    if (ret != 0) {
	*error_code = MPIO_Err_create_code(MPI_SUCCESS,
					   MPIR_ERR_RECOVERABLE,
					   myname, __LINE__,
					   ADIOI_PVFS2_error_convert(ret),
					   "Error in PVFS_util_resolve", 0);
	return;
    }
    /* --END ERROR HANDLING-- */

    ret = PVFS_sys_getparent(cur_fs, pvfs_path, &credentials, &resp_getparent);

    ret = PVFS_sys_remove(resp_getparent.basename, 
			  resp_getparent.parent_ref, &credentials);
    /* --BEGIN ERROR HANDLING-- */
    if (ret != 0) {
	*error_code = MPIO_Err_create_code(MPI_SUCCESS,
					   MPIR_ERR_RECOVERABLE,
					   myname, __LINE__,
					   ADIOI_PVFS2_error_convert(ret),
					   "Error in PVFS_sys_remove", 0);
	return;
    }
    /* --END ERROR HANDLING-- */

    *error_code = MPI_SUCCESS;
    return;
}

开发者ID:ICLDisco，项目名称:ompi，代码行数:53，代码来源:ad_pvfs2_delete.c

示例8: ADIOI_PVFS_Fcntl

void ADIOI_PVFS_Fcntl(ADIO_File fd, int flag, ADIO_Fcntl_t *fcntl_struct,
		      int *error_code)
{
    static char myname[] = "ADIOI_PVFS_FCNTL";

    switch(flag) {
    case ADIO_FCNTL_GET_FSIZE:
	fcntl_struct->fsize = pvfs_lseek64(fd->fd_sys, 0, SEEK_END);
	if (fd->fp_sys_posn != -1) 
	     pvfs_lseek64(fd->fd_sys, fd->fp_sys_posn, SEEK_SET);
	if (fcntl_struct->fsize == -1) {
	    *error_code = MPIO_Err_create_code(MPI_SUCCESS,
					       MPIR_ERR_RECOVERABLE, myname,
					       __LINE__, MPI_ERR_IO, "**io",
					       "**io %s", strerror(errno));
	}
	else *error_code = MPI_SUCCESS;
	break;

    case ADIO_FCNTL_SET_DISKSPACE:
	ADIOI_GEN_Prealloc(fd, fcntl_struct->diskspace, error_code);
	break;

    case ADIO_FCNTL_SET_ATOMICITY:
	fd->atomicity = 0;
	/* --BEGIN ERROR HANDLING-- */
	if (fcntl_struct->atomicity != 0) {
	    *error_code = MPIO_Err_create_code(MPI_SUCCESS,
					       MPIR_ERR_RECOVERABLE,
					       myname, __LINE__,
					       MPI_ERR_UNSUPPORTED_OPERATION,
					       "PVFS does not support atomic mode",
					       0);
	    return;
	}
	/* --END ERROR HANDLING-- */
	break;

    default:
	/* --BEGIN ERROR HANDLING-- */
	*error_code = MPIO_Err_create_code(MPI_SUCCESS,
					   MPIR_ERR_RECOVERABLE,
					   myname, __LINE__,
					   MPI_ERR_ARG,
					   "**flag", "**flag %d", flag);
	return;  
	/* --END ERROR HANDLING-- */
    }
}

开发者ID:aosm，项目名称:openmpi，代码行数:49，代码来源:io_romio_ad_pvfs_fcntl.c

示例9: ADIOI_GEN_Fcntl

void ADIOI_GEN_Fcntl(ADIO_File fd, int flag, ADIO_Fcntl_t * fcntl_struct, int *error_code)
{
    static char myname[] = "ADIOI_GEN_FCNTL";

    switch (flag) {
        case ADIO_FCNTL_GET_FSIZE:
#ifdef ADIOI_MPE_LOGGING
            MPE_Log_event(ADIOI_MPE_lseek_a, 0, NULL);
#endif
            fcntl_struct->fsize = lseek(fd->fd_sys, 0, SEEK_END);
#ifdef ADIOI_MPE_LOGGING
            MPE_Log_event(ADIOI_MPE_lseek_b, 0, NULL);
#endif
            if (fd->fp_sys_posn != -1) {
#ifdef ADIOI_MPE_LOGGING
                MPE_Log_event(ADIOI_MPE_lseek_a, 0, NULL);
#endif
                lseek(fd->fd_sys, fd->fp_sys_posn, SEEK_SET);
#ifdef ADIOI_MPE_LOGGING
                MPE_Log_event(ADIOI_MPE_lseek_b, 0, NULL);
#endif
            }
            if (fcntl_struct->fsize == -1) {
                *error_code = MPIO_Err_create_code(MPI_SUCCESS,
                                                   MPIR_ERR_RECOVERABLE, myname,
                                                   __LINE__, MPI_ERR_IO, "**io",
                                                   "**io %s", strerror(errno));
            } else
                *error_code = MPI_SUCCESS;
            break;

        case ADIO_FCNTL_SET_DISKSPACE:
            ADIOI_GEN_Prealloc(fd, fcntl_struct->diskspace, error_code);
            break;

        case ADIO_FCNTL_SET_ATOMICITY:
            fd->atomicity = (fcntl_struct->atomicity == 0) ? 0 : 1;
            *error_code = MPI_SUCCESS;
            break;

            /* --BEGIN ERROR HANDLING-- */
        default:
            *error_code = MPIO_Err_create_code(MPI_SUCCESS,
                                               MPIR_ERR_RECOVERABLE,
                                               myname, __LINE__,
                                               MPI_ERR_ARG, "**flag", "**flag %d", flag);
            /* --END ERROR HANDLING-- */
    }
}

开发者ID:ParaStation，项目名称:psmpi2，代码行数:49，代码来源:ad_fcntl.c

示例10: ADIOI_BGL_Set_shared_fp

void ADIOI_BGL_Set_shared_fp(ADIO_File fd, ADIO_Offset offset, int *error_code)
{
    int err;
    MPI_Comm dupcommself;
    static char myname[] = "ADIOI_BGL_SET_SHARED_FP";

    if (fd->shared_fp_fd == ADIO_FILE_NULL) {
	MPI_Comm_dup(MPI_COMM_SELF, &dupcommself);
	fd->shared_fp_fd = ADIO_Open(MPI_COMM_SELF, dupcommself,
				     fd->shared_fp_fname, 
				     fd->file_system, fd->fns,
				     ADIO_CREATE | ADIO_RDWR | ADIO_DELETE_ON_CLOSE, 
				     0, MPI_BYTE, MPI_BYTE, MPI_INFO_NULL, 
				     ADIO_PERM_NULL, error_code);
    }

    if (*error_code != MPI_SUCCESS) return;

    ADIOI_WRITE_LOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));
    lseek(fd->shared_fp_fd->fd_sys, 0, SEEK_SET);
    err = write(fd->shared_fp_fd->fd_sys, &offset, sizeof(ADIO_Offset));
    ADIOI_UNLOCK(fd->shared_fp_fd, 0, SEEK_SET, sizeof(ADIO_Offset));

    if (err == -1) {
	*error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					   myname, __LINE__, MPI_ERR_IO,
					   "**io",
					   "**io %s", strerror(errno));
    }
    else *error_code = MPI_SUCCESS;
}

开发者ID:315234，项目名称:OpenFOAM-2.2.x-OSX，代码行数:31，代码来源:ad_bgl_setsh.c

示例11: ADIOI_PVFS2_Flush

void ADIOI_PVFS2_Flush(ADIO_File fd, int *error_code) 
{ 
    int ret, rank, dummy=0, dummy_in=0; 
    ADIOI_PVFS2_fs *pvfs_fs;
    static char myname[] = "ADIOI_PVFS2_FLUSH";

    *error_code = MPI_SUCCESS;

    pvfs_fs = (ADIOI_PVFS2_fs*)fd->fs_ptr;

    MPI_Comm_rank(fd->comm, &rank);


    /* unlike ADIOI_PVFS2_Resize, MPI_File_sync() does not perform any
     * syncronization */
    MPI_Reduce(&dummy_in, &dummy, 1, MPI_INT, MPI_SUM, 
	    fd->hints->ranklist[0], fd->comm);

    /* io_worker computed in ADIO_Open */
    if (rank == fd->hints->ranklist[0]) {
	ret = PVFS_sys_flush(pvfs_fs->object_ref, &(pvfs_fs->credentials));
	MPI_Bcast(&ret, 1, MPI_INT, 0, fd->comm);
    } else {
	MPI_Bcast(&ret, 1, MPI_INT, 0, fd->comm);
    }
    /* --BEGIN ERROR HANDLING-- */
    if (ret != 0) {
	*error_code = MPIO_Err_create_code(MPI_SUCCESS,
					   MPIR_ERR_RECOVERABLE,
					   myname, __LINE__,
					   ADIOI_PVFS2_error_convert(ret),
					   "Error in PVFS_sys_flush", 0);
    }
    /* --END ERROR HANDLING-- */
}

开发者ID:hpc，项目名称:mvapich-cce，代码行数:35，代码来源:ad_pvfs2_flush.c

示例12: ADIOI_GEN_aio_poll_fn

/* generic POSIX aio completion test routine */
int ADIOI_GEN_aio_poll_fn(void *extra_state, MPI_Status *status)
{
    ADIOI_AIO_Request *aio_req;
    int errcode=MPI_SUCCESS;

    aio_req = (ADIOI_AIO_Request *)extra_state;

    /* aio_error returns an ERRNO value */
    errno = aio_error(aio_req->aiocbp);
    if (errno == EINPROGRESS) {
	    /* TODO: need to diddle with status somehow */
    }
    else if (errno == ECANCELED) {
	    /* TODO: unsure how to handle this */
    } else if (errno == 0) {
	    ssize_t n = aio_return(aio_req->aiocbp);
	    aio_req->nbytes = n;
	    errcode = MPI_Grequest_complete(aio_req->req);
	    /* --BEGIN ERROR HANDLING-- */
	    if (errcode != MPI_SUCCESS) {
		    errcode = MPIO_Err_create_code(MPI_SUCCESS,
				    MPIR_ERR_RECOVERABLE,
				    "ADIOI_GEN_aio_poll_fn", __LINE__,
				    MPI_ERR_IO, "**mpi_grequest_complete",
				    0);
	    }
	    /* --END ERROR HANDLING-- */
    }
    return errcode;
}

开发者ID:ORNL，项目名称:ompi，代码行数:31，代码来源:ad_iwrite.c

示例13: ADIOI_NTFS_aio_poll_fn

/* poll for completion of a single outstanding AIO request */
int ADIOI_NTFS_aio_poll_fn(void *extra_state, MPI_Status *status)
{
    ADIOI_AIO_Request *aio_req;
    int mpi_errno = MPI_SUCCESS;

    /* FIXME: Validate the args -- has it already been done by the 
       caller ? */

    aio_req = (ADIOI_AIO_Request *)extra_state;
    
    /* XXX: test for AIO completion here */
    if(!GetOverlappedResult( aio_req->fd, aio_req->lpOvl, 
                            &(aio_req->nbytes), FALSE)){
        if(GetLastError() == ERROR_IO_INCOMPLETE){
        /* IO in progress */
	    /* TODO: need to diddle with status somehow */
        }else{
        /* Error occured */
        /* TODO: unsure how to handle this */    
        }
    }else{
        mpi_errno = MPI_Grequest_complete(aio_req->req);
	    if (mpi_errno != MPI_SUCCESS) {
		    mpi_errno = MPIO_Err_create_code(MPI_SUCCESS,
				    MPIR_ERR_RECOVERABLE,
				    "ADIOI_NTFS_aio_poll_fn", __LINE__,
				    MPI_ERR_IO, "**mpi_grequest_complete",
				    0);
	    }
    }
    return mpi_errno;
}

开发者ID:315234，项目名称:OpenFOAM-2.2.x-OSX，代码行数:33，代码来源:ad_ntfs_iwrite.c

示例14: ADIOI_NTFS_IwriteContig

void ADIOI_NTFS_IwriteContig(ADIO_File fd, void *buf, int count, 
			     MPI_Datatype datatype, int file_ptr_type,
			     ADIO_Offset offset, ADIO_Request *request,
			     int *error_code)  
{
    int len, typesize;
    int err;
    static char myname[] = "ADIOI_NTFS_IwriteContig";

    MPI_Type_size(datatype, &typesize);
    len = count * typesize;

    if (file_ptr_type == ADIO_INDIVIDUAL)
    {
	offset = fd->fp_ind;
    }
    err = ADIOI_NTFS_aio(fd, buf, len, offset, 1, request);
    if (file_ptr_type == ADIO_INDIVIDUAL)
    {
	fd->fp_ind += len;
    }

    /* --BEGIN ERROR HANDLING-- */
    if (err != MPI_SUCCESS)
    {
	*error_code = MPIO_Err_create_code(err, MPIR_ERR_RECOVERABLE,
					   myname, __LINE__, MPI_ERR_IO,
					   "**io", 0);
	return;
    }
    /* --END ERROR HANDLING-- */
    *error_code = MPI_SUCCESS;

    fd->fp_sys_posn = -1;   /* set it to null. */
}

开发者ID:315234，项目名称:OpenFOAM-2.2.x-OSX，代码行数:35，代码来源:ad_ntfs_iwrite.c

示例15: ADIOI_ZOIDFS_Delete

void ADIOI_ZOIDFS_Delete(char *filename, int *error_code)
{
    int ret;
    static char myname[] = "ADIOI_ZOIDFS_DELETE";

    ADIOI_ZOIDFS_Init(0, error_code);
    /* --BEGIN ERROR HANDLING-- */
    if (*error_code != MPI_SUCCESS)
    {
	/* ADIOI_ZOIDFS_INIT handles creating error codes itself */
	return;
    }
    /* --END ERROR HANDLING-- */

    ret = zoidfs_remove(NULL, NULL, filename, NULL, ZOIDFS_NO_OP_HINT);
    /* --BEGIN ERROR HANDLING-- */
    if (ret != ZFS_OK) {
	*error_code = MPIO_Err_create_code(MPI_SUCCESS,
					   MPIR_ERR_RECOVERABLE,
					   myname, __LINE__,
					   ADIOI_ZOIDFS_error_convert(ret),
					   "Error in zoidfs_remove", 0);
	return;
    }
    /* --END ERROR HANDLING-- */

    *error_code = MPI_SUCCESS;
    return;
}

开发者ID:00datman，项目名称:ompi，代码行数:29，代码来源:ad_zoidfs_delete.c

示例16: ADIOI_cb_bcast_rank_map

/* ADIOI_cb_bcast_rank_map() - broadcast the rank array
 *
 * Parameters:
 * fd - ADIO_File for which update is occurring.  cb_nodes and ranklist
 * parameters must be up-to-date on rank 0 of the fd->comm.
 *
 * should probably be a void fn.
 */
int ADIOI_cb_bcast_rank_map(ADIO_File fd)
{
    int my_rank;
    char *value;
	int error_code = MPI_SUCCESS;
	static char myname[] = "ADIOI_cb_bcast_rank_map";

    MPI_Bcast(&(fd->hints->cb_nodes), 1, MPI_INT, 0, fd->comm);
    if (fd->hints->cb_nodes > 0) {
	MPI_Comm_rank(fd->comm, &my_rank);
	if (my_rank != 0) {
	    fd->hints->ranklist = ADIOI_Malloc(fd->hints->cb_nodes*sizeof(int));
	    if (fd->hints->ranklist == NULL) {
                error_code = MPIO_Err_create_code(error_code,
                                                  MPIR_ERR_RECOVERABLE,
                                                  myname,
                                                  __LINE__,
                                                  MPI_ERR_OTHER,
                                                  "**nomem2",0);
                return error_code;
	    }
	}
	MPI_Bcast(fd->hints->ranklist, fd->hints->cb_nodes, MPI_INT, 0, 
		  fd->comm);
    }
    /* TEMPORARY -- REMOVE WHEN NO LONGER UPDATING INFO FOR
     * FS-INDEP. */
    value = (char *) ADIOI_Malloc((MPI_MAX_INFO_VAL+1)*sizeof(char));
    ADIOI_Snprintf(value, MPI_MAX_INFO_VAL+1, "%d", fd->hints->cb_nodes);
    ADIOI_Info_set(fd->info, "cb_nodes", value);
    ADIOI_Free(value);

    return 0;
}

开发者ID:abhinavvishnu，项目名称:matex，代码行数:42，代码来源:cb_config_list.c

示例17: ADIOI_ZOIDFS_Flush

void ADIOI_ZOIDFS_Flush(ADIO_File fd, int *error_code) 
{ 
    int ret, rank, dummy=0, dummy_in=0; 
    ADIOI_ZOIDFS_object *zoidfs_obj_ptr;
    static char myname[] = "ADIOI_ZOIDFS_FLUSH";

    *error_code = MPI_SUCCESS;

    zoidfs_obj_ptr = (ADIOI_ZOIDFS_object*)fd->fs_ptr;

    MPI_Comm_rank(fd->comm, &rank);

    /* collective call to ensure no outstanding write requests. reduce is
     * slightly less expensvie than barrier */
    MPI_Reduce(&dummy_in, &dummy, 1, MPI_INT, MPI_SUM, 
	    fd->hints->ranklist[0], fd->comm);

    if (rank == fd->hints->ranklist[0]) {
	ret = zoidfs_commit(zoidfs_obj_ptr, ZOIDFS_NO_OP_HINT);
    }
    MPI_Bcast(&ret, 1, MPI_INT, fd->hints->ranklist[0], fd->comm);

    /* --BEGIN ERROR HANDLING-- */
    if (ret != 0) {
	*error_code = MPIO_Err_create_code(MPI_SUCCESS,
					   MPIR_ERR_RECOVERABLE,
					   myname, __LINE__,
					   ADIOI_ZOIDFS_error_convert(ret),
					   "Error in zoidfs_commit", 0);
    }
    /* --END ERROR HANDLING-- */
}

开发者ID:315234，项目名称:OpenFOAM-2.2.x-OSX，代码行数:32，代码来源:ad_zoidfs_flush.c

示例18: ADIOI_GEN_irc_wait_fn

/* wait for multiple requests to complete */
static int ADIOI_GEN_irc_wait_fn(int count, void **array_of_states,
                                 double timeout, MPI_Status *status)
{
    int i, errcode = MPI_SUCCESS;
    double starttime;
    ADIOI_NBC_Request **nbc_reqlist;

    nbc_reqlist = (ADIOI_NBC_Request **)array_of_states;

    starttime = MPI_Wtime();
    for (i = 0; i < count ; i++) {
        while (nbc_reqlist[i]->data.rd.state != ADIOI_IRC_STATE_COMPLETE) {
            errcode = ADIOI_GEN_irc_poll_fn(nbc_reqlist[i], MPI_STATUS_IGNORE);
            /* --BEGIN ERROR HANDLING-- */
            if (errcode != MPI_SUCCESS) {
                errcode = MPIO_Err_create_code(MPI_SUCCESS,
                        MPIR_ERR_RECOVERABLE,
                        "ADIOI_GEN_irc_wait_fn",
                        __LINE__, MPI_ERR_IO,
                        "**mpi_grequest_complete", 0);
            }
            /* --END ERROR HANDLING-- */

            if ((timeout > 0) && (timeout < (MPI_Wtime() - starttime)))
                goto fn_exit;
        }
    }

  fn_exit:
    return errcode;
}

开发者ID:ORNL，项目名称:ompi，代码行数:32，代码来源:ad_iread_coll.c

示例19: handle

/*@
    MPI_File_get_byte_offset - Returns the absolute byte position in 
                the file corresponding to "offset" etypes relative to
                the current view

Input Parameters:
. fh - file handle (handle)
. offset - offset (nonnegative integer)

Output Parameters:
. disp - absolute byte position of offset (nonnegative integer)

.N fortran
@*/
int MPI_File_get_byte_offset(MPI_File fh, MPI_Offset offset, MPI_Offset *disp)
{
    int error_code;
    ADIO_File adio_fh;
    static char myname[] = "MPI_FILE_GET_BYTE_OFFSET";

    adio_fh = MPIO_File_resolve(fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(adio_fh, myname, error_code);

    if (offset < 0)
    {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_ARG,
					  "**iobadoffset", 0);
	error_code = MPIO_Err_return_file(adio_fh, error_code);
	goto fn_exit;
    }

    MPIO_CHECK_NOT_SEQUENTIAL_MODE(adio_fh, myname, error_code);
    /* --END ERROR HANDLING-- */

    ADIOI_Get_byte_offset(adio_fh, offset, disp);

fn_exit:

    return MPI_SUCCESS;
}

开发者ID:ICLDisco，项目名称:ompi，代码行数:43，代码来源:get_bytoff.c

示例20: MPIR_MPIOInit

void MPIR_MPIOInit(int * error_code) {

    int flag;
    char myname[] = "MPIR_MPIOInit";

    /* first check if ADIO has been initialized. If not, initialize it */
    if (ADIO_Init_keyval == MPI_KEYVAL_INVALID) {
        MPI_Initialized(&flag);

	/* --BEGIN ERROR HANDLING-- */
        if (!flag) {
	    *error_code = MPIO_Err_create_code(MPI_SUCCESS,
		    MPIR_ERR_RECOVERABLE, myname, __LINE__,
		    MPI_ERR_OTHER, "**initialized", 0);
	    *error_code = MPIO_Err_return_file(MPI_FILE_NULL, *error_code);
	    return;
	}
	/* --END ERROR HANDLING-- */

        MPI_Keyval_create(MPI_NULL_COPY_FN, ADIOI_End_call, &ADIO_Init_keyval,
                          (void *) 0);

	/* put a dummy attribute on MPI_COMM_SELF, because we want the delete
	   function to be called when MPI_COMM_SELF is freed. Clarified
	   in MPI-2 section 4.8, the standard mandates that attributes on
	   MPI_COMM_SELF get cleaned up early in MPI_Finalize */

        MPI_Attr_put(MPI_COMM_SELF, ADIO_Init_keyval, (void *) 0);

	/* initialize ADIO */
        ADIO_Init( (int *)0, (char ***)0, error_code);
    }
    *error_code = MPI_SUCCESS;
}

开发者ID:00datman，项目名称:ompi，代码行数:34，代码来源:mpir-mpioinit.c

注：本文中的MPIO_Err_create_code函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MPIO_Err_return_file函数代码示例发布时间：2022-05-30

C++ MPID_THREAD_CS_EXIT函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18216|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9658|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8172|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8420|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8405|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ MPIO_Err_create_code函数代码示例

示例1: ADIOI_Cache_alloc

示例2: handle

示例3: ADIOI_NTFS_aio_wait_fn

示例4: MPIOI_File_read_all_begin

示例5: build_cb_config_list

示例6: ADIOI_PANFS_ReadContig

示例7: ADIOI_PVFS2_Delete

示例8: ADIOI_PVFS_Fcntl

示例9: ADIOI_GEN_Fcntl

示例10: ADIOI_BGL_Set_shared_fp

示例11: ADIOI_PVFS2_Flush

示例12: ADIOI_GEN_aio_poll_fn

示例13: ADIOI_NTFS_aio_poll_fn

示例14: ADIOI_NTFS_IwriteContig

示例15: ADIOI_ZOIDFS_Delete

示例16: ADIOI_cb_bcast_rank_map

示例17: ADIOI_ZOIDFS_Flush

示例18: ADIOI_GEN_irc_wait_fn

示例19: handle

示例20: MPIR_MPIOInit

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

Delphi Variants-VarIsEmpty、VarIsNull

nrk/redis-lua: A Lua client library for

win7系统注册表编辑器打开的操作方法

affenwiesel/matlab-formatter-vscode

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053