C++ MPIU_DBG_MSG函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MPIU_DBG_MSG函数的典型用法代码示例。如果您正苦于以下问题：C++ MPIU_DBG_MSG函数的具体用法？C++ MPIU_DBG_MSG怎么用？C++ MPIU_DBG_MSG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MPIU_DBG_MSG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: MPID_nem_newmad_handle_sreq

void
MPID_nem_newmad_handle_sreq(MPID_Request *req)
{
    int (*reqFn)(MPIDI_VC_t *, MPID_Request *, int *);
#ifdef DEBUG
    fprintf(stdout,"========> Completing Send req  %p \n",req);
#endif
    reqFn = req->dev.OnDataAvail;
    if (!reqFn){
	MPIDI_CH3U_Request_complete(req);
	MPIU_DBG_MSG(CH3_CHANNEL, VERBOSE, ".... complete");
    }
    else{
	MPIDI_VC_t *vc = req->ch.vc;
	int complete   = 0;
	reqFn(vc, req, &complete);
	if(!complete)
        {   
	   MPIU_Assert(complete == TRUE);
	}
    }
    if (REQ_FIELD(req,iov) != NULL)
	MPIU_Free((REQ_FIELD(req,iov)));
    mpid_nem_newmad_pending_send_req--;
}

开发者ID:addy004，项目名称:mpich2-yarn，代码行数:25，代码来源:newmad_poll.c

示例2: do_readv

static int do_readv(MPID_Request *rreq, int pipe_fd, MPID_IOV iov[],
                    int *iov_offset, int *iov_count, int *complete)
{
    int mpi_errno = MPI_SUCCESS;
    ssize_t nread;

    nread = readv(pipe_fd, &rreq->dev.iov[rreq->dev.iov_offset], rreq->dev.iov_count);
    MPIU_ERR_CHKANDJUMP2(nread < 0 && errno != EAGAIN, mpi_errno, MPI_ERR_OTHER, "**read",
                         "**readv %d %s", errno, MPIU_Strerror(errno));

    if (nread < 0) {
        if (errno == EAGAIN) goto fn_exit;
        MPIU_ERR_CHKANDJUMP2(errno != EAGAIN, mpi_errno, MPI_ERR_OTHER, "**vmsplice",
                             "**vmsplice %d %s", errno, MPIU_Strerror(errno));
    }

    *complete = adjust_partially_xferred_iov(iov, iov_offset, iov_count, nread);
    if (*complete) {
        /* look for additional data to send and reload IOV if there is more */
        mpi_errno = check_req_complete(rreq->ch.vc, rreq, complete);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);

        if (*complete) {
            nread = close(pipe_fd);
            MPIU_ERR_CHKANDJUMP(nread < 0, mpi_errno, MPI_ERR_OTHER, "**close");
            MPIU_DBG_MSG(CH3_CHANNEL, VERBOSE, ".... complete");
        }
    }

fn_fail:
fn_exit:
    return mpi_errno;
}

开发者ID:abhinavvishnu，项目名称:matex，代码行数:33，代码来源:mpid_nem_lmt_vmsplice.c

示例3: MPIR_Thread_CS_Finalize

int MPIR_Thread_CS_Finalize( void )
{
    MPIU_DBG_MSG(THREAD,TYPICAL,"Freeing global mutex and private storage");
#if MPIU_THREAD_GRANULARITY == MPIU_THREAD_GRANULARITY_GLOBAL
/* There is a single, global lock, held for the duration of an MPI call */
    MPID_Thread_mutex_destroy(&MPIR_ThreadInfo.global_mutex, NULL);

#elif MPIU_THREAD_GRANULARITY == MPIU_THREAD_GRANULARITY_PER_OBJECT
    /* MPIU_THREAD_GRANULARITY_PER_OBJECT: There are multiple locks,
     * one for each logical class (e.g., each type of object) */
    MPID_Thread_mutex_destroy(&MPIR_ThreadInfo.global_mutex, NULL);
    MPID_Thread_mutex_destroy(&MPIR_ThreadInfo.handle_mutex, NULL);
    MPID_Thread_mutex_destroy(&MPIR_ThreadInfo.msgq_mutex, NULL);
    MPID_Thread_mutex_destroy(&MPIR_ThreadInfo.completion_mutex, NULL);
    MPID_Thread_mutex_destroy(&MPIR_ThreadInfo.ctx_mutex, NULL);
    MPID_Thread_mutex_destroy(&MPIR_ThreadInfo.pmi_mutex, NULL);


#elif MPIU_THREAD_GRANULARITY == MPIU_THREAD_GRANULARITY_LOCK_FREE
/* Updates to shared data and access to shared services is handled without 
   locks where ever possible. */
#error lock-free not yet implemented

#elif MPIU_THREAD_GRANULARITY == MPIU_THREAD_GRANULARITY_SINGLE
/* No thread support, make all operations a no-op */

#else
#error Unrecognized thread granularity
#endif

    MPIU_THREADPRIV_FINALIZE;

    return MPI_SUCCESS;
}

开发者ID:hpc，项目名称:mvapich2-cce，代码行数:34，代码来源:initthread.c

示例4: do_vmsplice

static int do_vmsplice(MPID_Request *sreq, int pipe_fd, MPID_IOV iov[],
                       int *iov_offset, int *iov_count, int *complete)
{
    int mpi_errno = MPI_SUCCESS;
    ssize_t err;

#if 1
    err = vmsplice(pipe_fd, &iov[*iov_offset], *iov_count, SPLICE_F_NONBLOCK);
#else
    err = writev(pipe_fd, &iov[*iov_offset], *iov_count);
#endif

    if (err < 0) {
        if (errno == EAGAIN) goto fn_exit;
        MPIU_ERR_CHKANDJUMP2(errno != EAGAIN, mpi_errno, MPI_ERR_OTHER, "**vmsplice",
                             "**vmsplice %d %s", errno, MPIU_Strerror(errno));
    }

    *complete = adjust_partially_xferred_iov(iov, iov_offset, iov_count, err);
    if (*complete) {
        /* look for additional data to send and reload IOV if there is more */
        mpi_errno = check_req_complete(sreq->ch.vc, sreq, complete);
        if (mpi_errno) MPIU_ERR_POP(mpi_errno);

        if (*complete) {
            err = close(pipe_fd);
            MPIU_ERR_CHKANDJUMP(err < 0, mpi_errno, MPI_ERR_OTHER, "**close");
            MPIU_DBG_MSG(CH3_CHANNEL, VERBOSE, ".... complete");
        }
    }

fn_fail:
fn_exit:
    return mpi_errno;
}

开发者ID:abhinavvishnu，项目名称:matex，代码行数:35，代码来源:mpid_nem_lmt_vmsplice.c

示例5: MPIDI_CH3_RecvRndv

int MPIDI_CH3_RecvRndv( MPIDI_VC_t * vc, MPID_Request *rreq )
{
    int mpi_errno = MPI_SUCCESS;

    /* A rendezvous request-to-send (RTS) message has arrived.  We need
       to send a CTS message to the remote process. */
    MPID_Request * cts_req;
    MPIDI_CH3_Pkt_t upkt;
    MPIDI_CH3_Pkt_rndv_clr_to_send_t * cts_pkt = &upkt.rndv_clr_to_send;
    
    MPIU_DBG_MSG(CH3_OTHER,VERBOSE,
		 "rndv RTS in the request, sending rndv CTS");
    
    MPIDI_Pkt_init(cts_pkt, MPIDI_CH3_PKT_RNDV_CLR_TO_SEND);
    cts_pkt->sender_req_id = rreq->dev.sender_req_id;
    cts_pkt->receiver_req_id = rreq->handle;
    MPIU_THREAD_CS_ENTER(CH3COMM,vc);
    mpi_errno = MPIU_CALL(MPIDI_CH3,iStartMsg(vc, cts_pkt, 
					      sizeof(*cts_pkt), &cts_req));
    MPIU_THREAD_CS_EXIT(CH3COMM,vc);
    if (mpi_errno != MPI_SUCCESS) {
	MPIU_ERR_SETANDJUMP(mpi_errno,MPI_ERR_OTHER, "**ch3|ctspkt");
    }
    if (cts_req != NULL)
    {
	/* FIXME: Ideally we could specify that a req not be returned.  
	   This would avoid our having to decrement the
	   reference count on a req we don't want/need. */
	MPID_Request_release(cts_req);
    }

 fn_fail:    
    return mpi_errno;
}

开发者ID:OngOngoing，项目名称:219351_homework，代码行数:34，代码来源:ch3u_rndv.c

示例6: MPIDI_CH3U_Post_data_receive_unexpected

int MPIDI_CH3U_Post_data_receive_unexpected(MPID_Request * rreq)
{
    int mpi_errno = MPI_SUCCESS;
    MPIDI_STATE_DECL(MPID_STATE_MPIDI_CH3U_POST_DATA_RECEIVE_UNEXPECTED);

    MPIDI_FUNC_ENTER(MPID_STATE_MPIDI_CH3U_POST_DATA_RECEIVE_UNEXPECTED);

    /* FIXME: to improve performance, allocate temporary buffer from a 
       specialized buffer pool. */
    /* FIXME: to avoid memory exhaustion, integrate buffer pool management
       with flow control */
    MPIU_DBG_MSG(CH3_OTHER,VERBOSE,"unexpected request allocated");
    
    rreq->dev.tmpbuf = MPIU_Malloc(rreq->dev.recv_data_sz);
    if (!rreq->dev.tmpbuf) {
	MPIU_ERR_SETANDJUMP1(mpi_errno,MPI_ERR_OTHER,"**nomem","**nomem %d",
			     rreq->dev.recv_data_sz);
    }
    rreq->dev.tmpbuf_sz = rreq->dev.recv_data_sz;
    
    rreq->dev.iov[0].MPID_IOV_BUF = (MPID_IOV_BUF_CAST)rreq->dev.tmpbuf;
    rreq->dev.iov[0].MPID_IOV_LEN = rreq->dev.recv_data_sz;
    rreq->dev.iov_count = 1;
    rreq->dev.OnDataAvail = MPIDI_CH3_ReqHandler_UnpackUEBufComplete;
    rreq->dev.recv_pending_count = 2;

 fn_fail:
    MPIDI_FUNC_EXIT(MPID_STATE_MPIDI_CH3U_POST_DATA_RECEIVE_UNEXPECTED);
    return mpi_errno;
}

开发者ID:wilseypa，项目名称:llamaOS，代码行数:30，代码来源:ch3u_handle_recv_pkt.c

示例7: MPIDI_CH3U_Buffer_allocate

void MPIDI_CH3U_Buffer_allocate(
    const void * const sbuf, MPI_Aint scount, MPI_Datatype sdt, int * smpi_errno,
    void ** rbuf_handle, MPI_Aint rcount, MPI_Datatype rdt, MPIDI_msg_sz_t * rsz,
    int * rmpi_errno)
{
    int sdt_contig;
    int rdt_contig;
    MPI_Aint sdt_true_lb, rdt_true_lb;
    MPIDI_msg_sz_t sdata_sz;
    MPIDI_msg_sz_t rdata_sz;
    MPID_Datatype * sdt_ptr;
    MPID_Datatype * rdt_ptr;
    MPIDI_STATE_DECL(MPID_STATE_MPIDI_CH3U_BUFFER_ALLOCATE);

    MPIDI_FUNC_ENTER(MPID_STATE_MPIDI_CH3U_BUFFER_ALLOCATE);
    *smpi_errno = MPI_SUCCESS;
    *rmpi_errno = MPI_SUCCESS;

    MPIDI_Datatype_get_info(scount, sdt, sdt_contig, sdata_sz, sdt_ptr, sdt_true_lb);
    MPIDI_Datatype_get_info(rcount, rdt, rdt_contig, rdata_sz, rdt_ptr, rdt_true_lb);

    /* --BEGIN ERROR HANDLING-- */
    if (sdata_sz > rdata_sz)
    {
	MPIU_DBG_MSG_FMT(CH3_OTHER,TYPICAL,(MPIU_DBG_FDEST,
	    "message truncated, sdata_sz=" MPIDI_MSG_SZ_FMT " rdata_sz=" MPIDI_MSG_SZ_FMT,
			  sdata_sz, rdata_sz));
	sdata_sz = rdata_sz;
	*rmpi_errno = MPIR_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE, FCNAME, __LINE__, MPI_ERR_TRUNCATE, "**truncate", "**truncate %d %d", sdata_sz, rdata_sz );
    }
    /* --END ERROR HANDLING-- */

    if (sdata_sz == 0)
    {
	*rsz = 0;
	goto fn_exit;
    }

    if (sdt_contig && rdt_contig)
    {
	*rbuf_handle = (void *)MPIU_Malloc(sdata_sz);
        MPIU_Assert(*rbuf_handle);
	*rsz = sdata_sz;
    }
    else
    {
	/* --BEGIN ERROR HANDLING-- */

        MPIU_DBG_MSG(CH3_OTHER,TYPICAL,"Sender and receiver datatypes are not contiguous");
        *smpi_errno = MPIR_Err_create_code(MPI_SUCCESS, MPIR_ERR_FATAL, FCNAME, __LINE__, MPI_ERR_OTHER, "**zcopybufalloc", "**zcopybufalloc %d %d", scount, rcount);
        *rmpi_errno = *smpi_errno;
        *rsz = 0;
        goto fn_exit;

	/* --END ERROR HANDLING-- */
    }

  fn_exit:
    MPIDI_FUNC_EXIT(MPID_STATE_MPIDI_CH3U_BUFFER_ALLOCATE);
}

开发者ID:tjhei，项目名称:fgmpi，代码行数:60，代码来源:ch3u_buffer.c

示例8: MPID_nem_mxm_iSendContig

int MPID_nem_mxm_iSendContig(MPIDI_VC_t * vc, MPID_Request * sreq, void *hdr, MPIDI_msg_sz_t hdr_sz,
                             void *data, MPIDI_msg_sz_t data_sz)
{
    int mpi_errno = MPI_SUCCESS;
    MPID_nem_mxm_vc_area *vc_area = NULL;
    MPID_nem_mxm_req_area *req_area = NULL;

    MPIDI_STATE_DECL(MPID_STATE_MPID_NEM_MXM_ISENDCONTIGMSG);
    MPIDI_FUNC_ENTER(MPID_STATE_MPID_NEM_MXM_ISENDCONTIGMSG);

    MPIU_Assert(hdr_sz <= sizeof(MPIDI_CH3_Pkt_t));
    MPIU_DBG_MSG(CH3_CHANNEL, VERBOSE, "mxm_iSendContig");
    MPIDI_DBG_Print_packet((MPIDI_CH3_Pkt_t *) hdr);

    MPIU_Memcpy(&(sreq->dev.pending_pkt), (char *) hdr, sizeof(MPIDI_CH3_Pkt_t));

    _dbg_mxm_output(5,
                    "iSendContig ========> Sending ADI msg (to=%d type=%d) for req %p (data_size %d, %d) \n",
                    vc->pg_rank, sreq->dev.pending_pkt.type, sreq, sizeof(MPIDI_CH3_Pkt_t),
                    data_sz);

    vc_area = VC_BASE(vc);
    req_area = REQ_BASE(sreq);

    req_area->ctx = sreq;
    req_area->iov_buf = req_area->tmp_buf;
    req_area->iov_count = 0;

    req_area->iov_buf[req_area->iov_count].ptr = (void *) &(sreq->dev.pending_pkt);
    req_area->iov_buf[req_area->iov_count].length = sizeof(MPIDI_CH3_Pkt_t);
    (req_area->iov_count)++;

    if (sreq->dev.ext_hdr_sz != 0) {
        req_area->iov_buf[req_area->iov_count].ptr = (void *) (sreq->dev.ext_hdr_ptr);
        req_area->iov_buf[req_area->iov_count].length = sreq->dev.ext_hdr_sz;
        (req_area->iov_count)++;
    }

    if (data_sz) {
        req_area->iov_buf[req_area->iov_count].ptr = (void *) data;
        req_area->iov_buf[req_area->iov_count].length = data_sz;
        (req_area->iov_count)++;
    }

    vc_area->pending_sends += 1;
    sreq->ch.vc = vc;
    sreq->ch.noncontig = FALSE;

    mpi_errno = _mxm_isend(vc_area->mxm_ep, req_area, MXM_MPICH_ISEND_AM,
                           mxm_obj->mxm_mq, mxm_obj->mxm_rank, MXM_MPICH_HID_ADI_MSG, 0, 0);
    if (mpi_errno)
        MPIR_ERR_POP(mpi_errno);

  fn_exit:
    MPIDI_FUNC_EXIT(MPID_STATE_MPID_NEM_MXM_ISENDCONTIGMSG);
    return mpi_errno;
  fn_fail:
    goto fn_exit;
}

开发者ID:Niharikareddy，项目名称:mpich，代码行数:59，代码来源:mxm_send.c

示例9: MPID_nem_mxm_iStartContigMsg

int MPID_nem_mxm_iStartContigMsg(MPIDI_VC_t * vc, void *hdr, MPIDI_msg_sz_t hdr_sz, void *data,
                                 MPIDI_msg_sz_t data_sz, MPID_Request ** sreq_ptr)
{
    int mpi_errno = MPI_SUCCESS;
    MPID_Request *sreq = NULL;
    MPID_nem_mxm_vc_area *vc_area = NULL;
    MPID_nem_mxm_req_area *req_area = NULL;

    MPIDI_STATE_DECL(MPID_STATE_MPID_NEM_MXM_ISTARTCONTIGMSG);
    MPIDI_FUNC_ENTER(MPID_STATE_MPID_NEM_MXM_ISTARTCONTIGMSG);

    MPIU_Assert(hdr_sz <= sizeof(MPIDI_CH3_Pkt_t));
    MPIU_DBG_MSG(CH3_CHANNEL, VERBOSE, "mxm_iStartContigMsg");
    MPIDI_DBG_Print_packet((MPIDI_CH3_Pkt_t *) hdr);

    /* create a request */
    sreq = MPID_Request_create();
    MPIU_Assert(sreq != NULL);
    MPIU_Object_set_ref(sreq, 2);
    MPIU_Memcpy(&(sreq->dev.pending_pkt), (char *) hdr, sizeof(MPIDI_CH3_Pkt_t));
    sreq->kind = MPID_REQUEST_SEND;
    sreq->dev.OnDataAvail = NULL;
    sreq->dev.tmpbuf = NULL;

    _dbg_mxm_output(5,
                    "iStartContigMsg ========> Sending ADI msg (to=%d type=%d) for req %p (data_size %d, %d) \n",
                    vc->pg_rank, sreq->dev.pending_pkt.type, sreq, sizeof(MPIDI_CH3_Pkt_t),
                    data_sz);

    vc_area = VC_BASE(vc);
    req_area = REQ_BASE(sreq);

    req_area->ctx = sreq;
    req_area->iov_buf = req_area->tmp_buf;
    req_area->iov_count = 1;
    req_area->iov_buf[0].ptr = (void *) &(sreq->dev.pending_pkt);
    req_area->iov_buf[0].length = sizeof(MPIDI_CH3_Pkt_t);
    if (data_sz) {
        req_area->iov_count = 2;
        req_area->iov_buf[1].ptr = (void *) data;
        req_area->iov_buf[1].length = data_sz;
    }

    vc_area->pending_sends += 1;
    sreq->ch.vc = vc;
    sreq->ch.noncontig = FALSE;

    mpi_errno = _mxm_isend(vc_area->mxm_ep, req_area, MXM_MPICH_ISEND_AM,
                           mxm_obj->mxm_mq, mxm_obj->mxm_rank, MXM_MPICH_HID_ADI_MSG, 0, 0);
    if (mpi_errno)
        MPIU_ERR_POP(mpi_errno);

  fn_exit:
    *sreq_ptr = sreq;
    MPIDI_FUNC_EXIT(MPID_STATE_MPID_NEM_MXM_ISTARTCONTIGMSG);
    return mpi_errno;
  fn_fail:
    goto fn_exit;
}

开发者ID:mpifl，项目名称:mpich3newforfile，代码行数:59，代码来源:mxm_send.c

示例10: MPID_nem_mxm_SendNoncontig

int MPID_nem_mxm_SendNoncontig(MPIDI_VC_t * vc, MPID_Request * sreq, void *hdr,
                               MPIDI_msg_sz_t hdr_sz)
{
    int mpi_errno = MPI_SUCCESS;
    MPIDI_msg_sz_t last;
    MPID_nem_mxm_vc_area *vc_area = NULL;
    MPID_nem_mxm_req_area *req_area = NULL;

    MPIDI_STATE_DECL(MPID_STATE_MPID_NEM_MXM_SENDNONCONTIGMSG);
    MPIDI_FUNC_ENTER(MPID_STATE_MPID_NEM_MXM_SENDNONCONTIGMSG);

    MPIU_Assert(hdr_sz <= sizeof(MPIDI_CH3_Pkt_t));
    MPIU_DBG_MSG(CH3_CHANNEL, VERBOSE, "MPID_nem_mxm_iSendNoncontig");

    MPIU_Memcpy(&(sreq->dev.pending_pkt), (char *) hdr, sizeof(MPIDI_CH3_Pkt_t));

    _dbg_mxm_output(5,
                    "SendNoncontig ========> Sending ADI msg (to=%d type=%d) for req %p (data_size %d, %d) \n",
                    vc->pg_rank, sreq->dev.pending_pkt.type, sreq, sizeof(MPIDI_CH3_Pkt_t),
                    sreq->dev.segment_size);

    vc_area = VC_BASE(vc);
    req_area = REQ_BASE(sreq);

    req_area->ctx = sreq;
    req_area->iov_buf = req_area->tmp_buf;
    req_area->iov_count = 1;
    req_area->iov_buf[0].ptr = (void *) &(sreq->dev.pending_pkt);
    req_area->iov_buf[0].length = sizeof(MPIDI_CH3_Pkt_t);

    MPIU_Assert(sreq->dev.segment_first == 0);
    last = sreq->dev.segment_size;
    if (last > 0) {
        sreq->dev.tmpbuf = MPIU_Malloc((size_t) sreq->dev.segment_size);
        MPIU_Assert(sreq->dev.tmpbuf);
        MPID_Segment_pack(sreq->dev.segment_ptr, sreq->dev.segment_first, &last, sreq->dev.tmpbuf);
        MPIU_Assert(last == sreq->dev.segment_size);

        req_area->iov_count = 2;
        req_area->iov_buf[1].ptr = sreq->dev.tmpbuf;
        req_area->iov_buf[1].length = last;
    }

    vc_area->pending_sends += 1;
    sreq->ch.vc = vc;
    sreq->ch.noncontig = TRUE;

    mpi_errno = _mxm_isend(vc_area->mxm_ep, req_area, MXM_MPICH_ISEND_AM,
                           mxm_obj->mxm_mq, mxm_obj->mxm_rank, MXM_MPICH_HID_ADI_MSG, 0, 0);
    if (mpi_errno)
        MPIU_ERR_POP(mpi_errno);

  fn_exit:
    MPIDI_FUNC_EXIT(MPID_STATE_MPID_NEM_MXM_SENDNONCONTIGMSG);
    return mpi_errno;
  fn_fail:
    goto fn_exit;
}

开发者ID:mpifl，项目名称:mpich3newforfile，代码行数:58，代码来源:mxm_send.c

示例11: MPID_nem_lmt_dma_done_send

int MPID_nem_lmt_dma_done_send(MPIDI_VC_t *vc, MPID_Request *sreq)
{
    int mpi_errno = MPI_SUCCESS;
    int complete = 0;
    int (*reqFn)(MPIDI_VC_t *, MPID_Request *, int *);
    MPIDI_STATE_DECL(MPID_STATE_MPID_NEM_LMT_DMA_DONE_SEND);

    MPIDI_FUNC_ENTER(MPID_STATE_MPID_NEM_LMT_DMA_DONE_SEND);

    /* free cookie from RTS packet */
    MPIU_Free(sreq->ch.s_cookie);

    /* We shouldn't ever need to handle the more IOVs case here.  The DONE
       message should only be sent when all of the data is truly transferred.
       However in the interest of robustness, we'll start to handle it and
       assert if it looks like we were supposed to send more data for some
       reason. */
    reqFn = sreq->dev.OnDataAvail;
    if (!reqFn) {
        MPIDI_CH3U_Request_complete(sreq);
        MPIU_DBG_MSG(CH3_CHANNEL, VERBOSE, ".... complete");
        goto fn_exit;
    }

    complete = 0;
    mpi_errno = reqFn(vc, sreq, &complete);
    if (mpi_errno) MPIU_ERR_POP(mpi_errno);
        
    if (complete) {
        /* request was completed by the OnDataAvail fn */
        MPIU_DBG_MSG(CH3_CHANNEL, VERBOSE, ".... complete");
        goto fn_exit;
    }
    else {
        /* There is more data to send. */
        MPIU_Assert(("should never be incomplete!", 0));
    }

    MPIDI_FUNC_EXIT(MPID_STATE_MPID_NEM_LMT_DMA_DONE_SEND);
fn_exit:
    return MPI_SUCCESS;
fn_fail:
    goto fn_exit;
}

开发者ID:adevress，项目名称:MPICH-BlueGene，代码行数:44，代码来源:mpid_nem_lmt_dma.c

示例12: MPID_nem_ptl_pkt_cancel_send_resp_handler

int MPID_nem_ptl_pkt_cancel_send_resp_handler(MPIDI_VC_t *vc, MPIDI_CH3_Pkt_t *pkt,
                                              MPIDI_msg_sz_t *buflen, MPID_Request **rreqp)
{
    int mpi_errno = MPI_SUCCESS;
    MPID_Request *sreq;
    MPIDI_nem_ptl_pkt_cancel_send_resp_t *resp_pkt = (MPIDI_nem_ptl_pkt_cancel_send_resp_t *)pkt;
    int i, ret;

    MPID_Request_get_ptr(resp_pkt->sender_req_id, sreq);

    if (resp_pkt->ack) {
        MPIR_STATUS_SET_CANCEL_BIT(sreq->status, TRUE);

        /* remove/free any remaining get MEs and handles */
        for (i = 0; i < REQ_PTL(sreq)->num_gets; i++) {
            ret = PtlMEUnlink(REQ_PTL(sreq)->get_me_p[i]);
            MPIR_ERR_CHKANDJUMP1(ret, mpi_errno, MPI_ERR_OTHER, "**ptlmeunlink", "**ptlmeunlink %s", MPID_nem_ptl_strerror(ret));
            mpi_errno = MPID_Request_complete(sreq);
            if (mpi_errno != MPI_SUCCESS) {
                MPIR_ERR_POP(mpi_errno);
            }
        }
        if (REQ_PTL(sreq)->get_me_p)
            MPIU_Free(REQ_PTL(sreq)->get_me_p);

        MPIU_DBG_MSG(CH3_OTHER,TYPICAL,"message cancelled");
    } else {
        MPIR_STATUS_SET_CANCEL_BIT(sreq->status, FALSE);
        MPIU_DBG_MSG(CH3_OTHER,TYPICAL,"unable to cancel message");
    }

    mpi_errno = MPID_Request_complete(sreq);
    if (mpi_errno != MPI_SUCCESS) {
        MPIR_ERR_POP(mpi_errno);
    }

     *rreqp = NULL;

 fn_exit:
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:Niharikareddy，项目名称:mpich，代码行数:43，代码来源:ptl_probe.c

示例13: _mxm_irecv

static int _mxm_irecv(MPID_nem_mxm_ep_t * ep, MPID_nem_mxm_req_area * req, int id, mxm_mq_h mxm_mq,
                      mxm_tag_t mxm_tag)
{
    int mpi_errno = MPI_SUCCESS;
    mxm_error_t ret = MXM_OK;
    mxm_recv_req_t *mxm_rreq;
    list_head_t *free_queue = NULL;

    MPIU_Assert(req);

    free_queue = (ep ? &ep->free_queue : &mxm_obj->free_queue);
    req->mxm_req = list_dequeue_mxm_req(free_queue);
    if (!req->mxm_req) {
        list_grow_mxm_req(free_queue);
        req->mxm_req = list_dequeue_mxm_req(free_queue);
        if (!req->mxm_req) {
            MPIU_DBG_MSG(CH3_CHANNEL, VERBOSE, "empty free queue");
            mpi_errno = MPI_ERR_OTHER;
            goto fn_fail;
        }
    }
    mxm_rreq = &(req->mxm_req->item.recv);

    mxm_rreq->base.state = MXM_REQ_NEW;
    mxm_rreq->base.mq = mxm_mq;
    mxm_rreq->base.conn = (ep ? ep->mxm_conn : 0);
    mxm_rreq->base.completed_cb = _mxm_recv_completion_cb;
    mxm_rreq->base.context = req->ctx;

    mxm_rreq->tag = mxm_tag;
    mxm_rreq->tag_mask = _mxm_tag_mask(id);

    if (likely(req->iov_count == 1)) {
        mxm_rreq->base.data_type = MXM_REQ_DATA_BUFFER;
        mxm_rreq->base.data.buffer.ptr = req->iov_buf[0].ptr;
        mxm_rreq->base.data.buffer.length = req->iov_buf[0].length;
    }
    else {
        mxm_rreq->base.data_type = MXM_REQ_DATA_IOV;
        mxm_rreq->base.data.iov.vector = req->iov_buf;
        mxm_rreq->base.data.iov.count = req->iov_count;
    }

    ret = mxm_req_recv(mxm_rreq);
    if (MXM_OK != ret) {
        list_enqueue(free_queue, &req->mxm_req->queue);
        mpi_errno = MPI_ERR_OTHER;
        goto fn_fail;
    }

  fn_exit:
    return mpi_errno;
  fn_fail:
    goto fn_exit;
}

开发者ID:Niharikareddy，项目名称:mpich，代码行数:55，代码来源:mxm_poll.c

示例14: MPIDI_CH3_PktHandler_RndvSend

int MPIDI_CH3_PktHandler_RndvSend( MPIDI_VC_t *vc, MPIDI_CH3_Pkt_t *pkt, 
				   MPIDI_msg_sz_t *buflen, MPID_Request **rreqp )
{
    MPIDI_CH3_Pkt_rndv_send_t * rs_pkt = &pkt->rndv_send;
    int mpi_errno = MPI_SUCCESS;
    int complete;
    char *data_buf;
    MPIDI_msg_sz_t data_len;
    MPID_Request *req;
    
    MPIU_DBG_MSG(CH3_OTHER,VERBOSE,"received rndv send (data) pkt");

    MPID_Request_get_ptr(rs_pkt->receiver_req_id, req);

    data_len = ((*buflen - sizeof(MPIDI_CH3_Pkt_t) >= req->dev.recv_data_sz)
                ? req->dev.recv_data_sz : *buflen - sizeof(MPIDI_CH3_Pkt_t));
    data_buf = (char *)pkt + sizeof(MPIDI_CH3_Pkt_t);
    
    if (req->dev.recv_data_sz == 0) {
        *buflen = sizeof(MPIDI_CH3_Pkt_t);
        mpi_errno = MPID_Request_complete(req);
        if (mpi_errno != MPI_SUCCESS) {
            MPIR_ERR_POP(mpi_errno);
        }
	*rreqp = NULL;
    }
    else {
        mpi_errno = MPIDI_CH3U_Receive_data_found(req, data_buf, &data_len,
                                                  &complete);
	if (mpi_errno != MPI_SUCCESS) {
	    MPIR_ERR_SETANDJUMP1(mpi_errno,MPI_ERR_OTHER, "**ch3|postrecv",
			     "**ch3|postrecv %s", "MPIDI_CH3_PKT_RNDV_SEND");
	}

        *buflen = sizeof(MPIDI_CH3_Pkt_t) + data_len;

        if (complete) 
        {
            mpi_errno = MPID_Request_complete(req);
            if (mpi_errno != MPI_SUCCESS) {
                MPIR_ERR_POP(mpi_errno);
            }
            *rreqp = NULL;
        }
        else
        {
            *rreqp = req;
        }
   }
	
 fn_fail:
    return mpi_errno;
}

开发者ID:Niharikareddy，项目名称:mpich，代码行数:53，代码来源:ch3u_rndv.c

示例15: MPIR_Thread_CS_Init

static int MPIR_Thread_CS_Init( void )
{
    int err;
    MPIU_THREADPRIV_DECL;

    MPIU_Assert(MPICH_MAX_LOCKS >= MPIU_Nest_NUM_MUTEXES);

    /* we create this at all granularities right now */
    MPID_Thread_mutex_create(&MPIR_ThreadInfo.memalloc_mutex, &err);
    MPIU_Assert(err == 0);

    /* must come after memalloc_mutex creation */
    MPIU_THREADPRIV_INITKEY;
    MPIU_THREADPRIV_INIT;

#if MPIU_THREAD_GRANULARITY == MPIU_THREAD_GRANULARITY_GLOBAL
/* There is a single, global lock, held for the duration of an MPI call */
    MPID_Thread_mutex_create(&MPIR_ThreadInfo.global_mutex, &err);
    MPIU_Assert(err == 0);
    MPID_Thread_mutex_create(&MPIR_ThreadInfo.handle_mutex, &err);
    MPIU_Assert(err == 0);

#elif MPIU_THREAD_GRANULARITY == MPIU_THREAD_GRANULARITY_PER_OBJECT
    /* MPIU_THREAD_GRANULARITY_PER_OBJECT: Multiple locks */
    MPID_Thread_mutex_create(&MPIR_ThreadInfo.global_mutex, &err);
    MPIU_Assert(err == 0);
    MPID_Thread_mutex_create(&MPIR_ThreadInfo.handle_mutex, &err);
    MPIU_Assert(err == 0);
    MPID_Thread_mutex_create(&MPIR_ThreadInfo.msgq_mutex, &err);
    MPIU_Assert(err == 0);
    MPID_Thread_mutex_create(&MPIR_ThreadInfo.completion_mutex, &err);
    MPIU_Assert(err == 0);
    MPID_Thread_mutex_create(&MPIR_ThreadInfo.ctx_mutex, &err);
    MPIU_Assert(err == 0);
    MPID_Thread_mutex_create(&MPIR_ThreadInfo.pmi_mutex, &err);
    MPIU_Assert(err == 0);

#elif MPIU_THREAD_GRANULARITY == MPIU_THREAD_GRANULARITY_LOCK_FREE
/* Updates to shared data and access to shared services is handled without 
   locks where ever possible. */
#error lock-free not yet implemented

#elif MPIU_THREAD_GRANULARITY == MPIU_THREAD_GRANULARITY_SINGLE
/* No thread support, make all operations a no-op */

#else
#error Unrecognized thread granularity
#endif
    MPIU_DBG_MSG(THREAD,TYPICAL,"Created global mutex and private storage");
    return MPI_SUCCESS;
}

开发者ID:qingu，项目名称:WRF-Libraries，代码行数:51，代码来源:initthread.c

示例16: MPIDI_CH3I_Shm_send_progress

int MPIDI_CH3I_Shm_send_progress(void)
{
    int mpi_errno = MPI_SUCCESS;
    MPID_IOV *iov;
    int n_iov;
    MPID_Request *sreq;
    int again = 0;

    MPIDI_STATE_DECL(MPID_STATE_MPIDI_CH3I_SHM_SEND_PROGRESS);

    MPIDI_FUNC_ENTER(MPID_STATE_MPIDI_CH3I_SHM_SEND_PROGRESS);

    sreq = MPIDI_CH3I_shm_active_send;
    MPIU_DBG_STMT(CH3_CHANNEL, VERBOSE, {if (sreq) MPIU_DBG_MSG (CH3_CHANNEL, VERBOSE, "Send: cont sreq");});

开发者ID:abhinavvishnu，项目名称:matex，代码行数:14，代码来源:ch3_progress.c

示例17: MPID_nem_mxm_get_adi_msg

void MPID_nem_mxm_get_adi_msg(mxm_conn_h conn, mxm_imm_t imm, void *data,
                              size_t length, size_t offset, int last)
{
    MPIDI_VC_t *vc = NULL;

    MPIU_DBG_MSG(CH3_CHANNEL, VERBOSE, "MPID_nem_mxm_get_adi_msg");

    vc = mxm_conn_ctx_get(conn);

    _dbg_mxm_output(5, "========> Getting ADI msg (from=%d data_size %d) \n", vc->pg_rank, length);
    _dbg_mxm_out_buf(data, (length > 16 ? 16 : length));

    MPID_nem_handle_pkt(vc, data, (MPIDI_msg_sz_t) (length));
}

开发者ID:Niharikareddy，项目名称:mpich，代码行数:14，代码来源:mxm_poll.c

示例18: MPIDI_CH3U_Receive_data_unexpected

int MPIDI_CH3U_Receive_data_unexpected(MPID_Request * rreq, char *buf, MPIDI_msg_sz_t *buflen, int *complete)
{
    int mpi_errno = MPI_SUCCESS;
    MPIDI_STATE_DECL(MPID_STATE_MPIDI_CH3U_RECEIVE_DATA_UNEXPECTED);

    MPIDI_FUNC_ENTER(MPID_STATE_MPIDI_CH3U_RECEIVE_DATA_UNEXPECTED);

    /* FIXME: to improve performance, allocate temporary buffer from a 
       specialized buffer pool. */
    /* FIXME: to avoid memory exhaustion, integrate buffer pool management
       with flow control */
    MPIU_DBG_MSG(CH3_OTHER,VERBOSE,"unexpected request allocated");
    
    rreq->dev.tmpbuf = MPIU_Malloc(rreq->dev.recv_data_sz);
    if (!rreq->dev.tmpbuf) {
	MPIU_ERR_SETANDJUMP1(mpi_errno,MPI_ERR_OTHER,"**nomem","**nomem %d",
			     rreq->dev.recv_data_sz);
    }
    rreq->dev.tmpbuf_sz = rreq->dev.recv_data_sz;
    
    /* if all of the data has already been received, copy it
       now, otherwise build an iov and let the channel copy it */
    if (rreq->dev.recv_data_sz <= *buflen)
    {
        MPIU_Memcpy(rreq->dev.tmpbuf, buf, rreq->dev.recv_data_sz);
        *buflen = rreq->dev.recv_data_sz;
        rreq->dev.recv_pending_count = 1;
        *complete = TRUE;
    }
    else
    {
        rreq->dev.iov[0].MPID_IOV_BUF = (MPID_IOV_BUF_CAST)((char *)rreq->dev.tmpbuf);
        rreq->dev.iov[0].MPID_IOV_LEN = rreq->dev.recv_data_sz;
        rreq->dev.iov_count = 1;
        rreq->dev.recv_pending_count = 2;
        *buflen = 0;
        *complete = FALSE;
    }

    if (MPIDI_Request_get_msg_type(rreq) == MPIDI_REQUEST_EAGER_MSG)
        MPIR_T_ADD(RECVQ_STATISTICS, MPIDI_CH3I_unexpected_recvq_buffer_size, rreq->dev.tmpbuf_sz);

    rreq->dev.OnDataAvail = MPIDI_CH3_ReqHandler_UnpackUEBufComplete;

 fn_fail:
    MPIDI_FUNC_EXIT(MPID_STATE_MPIDI_CH3U_RECEIVE_DATA_UNEXPECTED);
    return mpi_errno;
}

开发者ID:wilseypa，项目名称:llamaOS，代码行数:48，代码来源:ch3u_handle_recv_pkt.c

示例19: MPIDI_CH3_EagerSyncZero

/* Send a zero-sized message with eager synchronous.  This is a temporary
   routine, as we may want to replace this with a counterpart to the
   Eager Short message */
int MPIDI_CH3_EagerSyncZero(MPID_Request **sreq_p, int rank, int tag, 
			    MPID_Comm * comm, int context_offset )
{
    int mpi_errno = MPI_SUCCESS;
    MPIDI_CH3_Pkt_t upkt;
    MPIDI_CH3_Pkt_eager_sync_send_t * const es_pkt = &upkt.eager_sync_send;
    MPIDI_VC_t * vc;
    MPID_Request *sreq = *sreq_p;
    
    MPIU_DBG_MSG(CH3_OTHER,VERBOSE,"sending zero length message");
    
    /* MT FIXME what are the two operations we are waiting for?  the send and
     * the sync response? */
    MPID_cc_set(&sreq->cc, 2);
    MPIDI_Request_set_msg_type(sreq, MPIDI_REQUEST_EAGER_MSG);
    sreq->dev.OnDataAvail = 0;
    
    MPIDI_Pkt_init(es_pkt, MPIDI_CH3_PKT_EAGER_SYNC_SEND);
    es_pkt->match.parts.rank = comm->rank;
    es_pkt->match.parts.tag = tag;
    es_pkt->match.parts.context_id = comm->context_id + context_offset;
    es_pkt->sender_req_id = sreq->handle;
    es_pkt->data_sz = 0;
    
    MPIDI_Comm_get_vc_set_active(comm, rank, &vc);
    MPIDI_VC_FAI_send_seqnum(vc, seqnum);
    MPIDI_Pkt_set_seqnum(es_pkt, seqnum);
    MPIDI_Request_set_seqnum(sreq, seqnum);
    
    MPIU_DBG_MSGPKT(vc,tag,es_pkt->match.parts.context_id,rank,(MPIDI_msg_sz_t)0,"EagerSync0");
    MPID_THREAD_CS_ENTER(POBJ, vc->pobj_mutex);
    mpi_errno = MPIDI_CH3_iSend(vc, sreq, es_pkt, sizeof(*es_pkt));
    MPID_THREAD_CS_EXIT(POBJ, vc->pobj_mutex);
    /* --BEGIN ERROR HANDLING-- */
    if (mpi_errno != MPI_SUCCESS)
    {
	MPID_Request_release(sreq);
	*sreq_p = NULL;
        MPIR_ERR_SETANDJUMP(mpi_errno, MPI_ERR_OTHER, "**ch3|eagermsg");
    }
    /* --END ERROR HANDLING-- */

 fn_exit:
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:Niharikareddy，项目名称:mpich，代码行数:50，代码来源:ch3u_eagersync.c

示例20: MPIDI_CH3_Connection_terminate

int MPIDI_CH3_Connection_terminate(MPIDI_VC_t * vc)
{
    int mpi_errno = MPI_SUCCESS;
    MPIDI_CH3I_VC *vcch = &vc->ch;

    MPIU_DBG_CONNSTATECHANGE(vc,vcch->conn,CONN_STATE_CLOSING);
    vcch->conn->state = CONN_STATE_CLOSING;
    MPIU_DBG_MSG(CH3_DISCONNECT,TYPICAL,"Closing sock (Post_close)");
    mpi_errno = MPIDU_Sock_post_close(vcch->sock);
    if (mpi_errno != MPI_SUCCESS) {
	MPIU_ERR_POP(mpi_errno);
    }

 fn_exit:
    return mpi_errno;
 fn_fail:
    goto fn_exit;
}

开发者ID:dbrowneup，项目名称:pmap，代码行数:18，代码来源:ch3_progress.c

注：本文中的MPIU_DBG_MSG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MPIU_DBG_MSG_FMT函数代码示例发布时间：2022-05-30

C++ MPIU_Assert函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18216|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9658|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8172|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8420|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8405|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ MPIU_DBG_MSG函数代码示例

示例1: MPID_nem_newmad_handle_sreq

示例2: do_readv

示例3: MPIR_Thread_CS_Finalize

示例4: do_vmsplice

示例5: MPIDI_CH3_RecvRndv

示例6: MPIDI_CH3U_Post_data_receive_unexpected

示例7: MPIDI_CH3U_Buffer_allocate

示例8: MPID_nem_mxm_iSendContig

示例9: MPID_nem_mxm_iStartContigMsg

示例10: MPID_nem_mxm_SendNoncontig

示例11: MPID_nem_lmt_dma_done_send

示例12: MPID_nem_ptl_pkt_cancel_send_resp_handler

示例13: _mxm_irecv

示例14: MPIDI_CH3_PktHandler_RndvSend

示例15: MPIR_Thread_CS_Init

示例16: MPIDI_CH3I_Shm_send_progress

示例17: MPID_nem_mxm_get_adi_msg

示例18: MPIDI_CH3U_Receive_data_unexpected

示例19: MPIDI_CH3_EagerSyncZero

示例20: MPIDI_CH3_Connection_terminate

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

Delphi Variants-VarIsEmpty、VarIsNull

nrk/redis-lua: A Lua client library for

win7系统注册表编辑器打开的操作方法

affenwiesel/matlab-formatter-vscode

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053