本文整理汇总了C++中MPI_Put函数的典型用法代码示例。如果您正苦于以下问题：C++ MPI_Put函数的具体用法？C++ MPI_Put怎么用？C++ MPI_Put使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了MPI_Put函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: _ZMPI_Alltoall_int_proclists_put
static int _ZMPI_Alltoall_int_proclists_put(int alloc_mem, int nphases, int *sendbuf, int nsprocs, int *sprocs, int *recvbuf, int nrprocs, int *rprocs, MPI_Comm comm)
{
int i, p, size, rank, *rcounts_put;
MPI_Win win;
MPI_Comm_size(comm, &size);
MPI_Comm_rank(comm, &rank);
if (alloc_mem) MPI_Alloc_mem(size * sizeof(int), MPI_INFO_NULL, &rcounts_put);
else rcounts_put = recvbuf;
if (nrprocs >= 0)
for (i = 0; i < nrprocs; ++i) rcounts_put[rprocs[i]] = DEFAULT_INT;
else
for (i = 0; i < size; ++i) rcounts_put[i] = DEFAULT_INT;
MPI_Win_create(rcounts_put, size * sizeof(int), sizeof(int), MPI_INFO_NULL, comm, &win);
MPI_Win_fence(MPI_MODE_NOSTORE|MPI_MODE_NOPRECEDE, win);
for (p = 0; p < nphases; ++p)
{
/* printf("%d: phase = %d of %d\n", rank, p, nphases);*/
if (rank % nphases == p)
{
if (nsprocs >= 0)
{
for (i = 0; i < nsprocs; ++i)
if (sendbuf[sprocs[i]] != DEFAULT_INT) MPI_Put(&sendbuf[sprocs[i]], 1, MPI_INT, sprocs[i], rank, 1, MPI_INT, win);
} else
{
for (i = 0; i < size; ++i)
if (sendbuf[i] != DEFAULT_INT) MPI_Put(&sendbuf[i], 1, MPI_INT, i, rank, 1, MPI_INT, win);
}
}
if (p < nphases - 1) MPI_Win_fence(0, win);
}
MPI_Win_fence(MPI_MODE_NOPUT|MPI_MODE_NOSUCCEED, win);
MPI_Win_free(&win);
if (alloc_mem)
{
if (nrprocs >= 0)
for (i = 0; i < nrprocs; ++i) recvbuf[rprocs[i]] = rcounts_put[rprocs[i]];
else
for (i = 0; i < size; ++i) recvbuf[i] = rcounts_put[i];
MPI_Free_mem(rcounts_put);
}
return MPI_SUCCESS;
}
开发者ID:fweik，项目名称:scafacos，代码行数:57，代码来源:zmpi_tools.c
示例2: run_put_with_fence
/*Run PUT with Fence */
void run_put_with_fence(int rank, WINDOW type)
{
double t;
int size, i, j;
MPI_Aint disp = 0;
MPI_Win win;
int window_size = WINDOW_SIZE_LARGE;
for (size = 1; size <= MAX_SIZE; size = size * 2) {
allocate_memory(rank, sbuf_original, rbuf_original, &sbuf, &rbuf, &rbuf, size*window_size, type, &win);
#if MPI_VERSION >= 3
if (type == WIN_DYNAMIC) {
disp = disp_remote;
}
#endif
if(size > LARGE_MESSAGE_SIZE) {
loop = LOOP_LARGE;
skip = SKIP_LARGE;
}
MPI_CHECK(MPI_Barrier(MPI_COMM_WORLD));
if(rank == 0) {
for (i = 0; i < skip + loop; i++) {
if (i == skip) {
t_start = MPI_Wtime ();
}
MPI_CHECK(MPI_Win_fence(0, win));
for(j = 0; j < window_size; j++) {
MPI_CHECK(MPI_Put(sbuf+(j*size), size, MPI_CHAR, 1, disp + (j * size), size, MPI_CHAR,
win));
}
MPI_CHECK(MPI_Win_fence(0, win));
}
t_end = MPI_Wtime ();
t = t_end - t_start;
} else {
for (i = 0; i < skip + loop; i++) {
MPI_CHECK(MPI_Win_fence(0, win));
for(j = 0; j < window_size; j++) {
MPI_CHECK(MPI_Put(sbuf+(j*size), size, MPI_CHAR, 0, disp + (j * size), size, MPI_CHAR,
win));
}
MPI_CHECK(MPI_Win_fence(0, win));
}
}
MPI_CHECK(MPI_Barrier(MPI_COMM_WORLD));
print_bibw(rank, size, t);
free_memory (sbuf, rbuf, win, rank);
}
}
开发者ID:Cai900205，项目名称:test，代码行数:57，代码来源:osu_put_bibw.c
示例3: do_test
int do_test(int origin_count, MPI_Datatype origin_type, int result_count,
MPI_Datatype result_type, int target_count, MPI_Datatype target_type)
{
int errs = 0, ret, origin_type_size, result_type_size;
ret = MPI_Put(origin_buf, origin_count, origin_type, 1, 0, target_count, target_type, win);
if (ret)
errs++;
ret = MPI_Get(origin_buf, origin_count, origin_type, 1, 0, target_count, target_type, win);
if (ret)
errs++;
ret = MPI_Accumulate(origin_buf, origin_count, origin_type, 1, 0, target_count,
target_type, MPI_SUM, win);
if (ret)
errs++;
ret = MPI_Get_accumulate(origin_buf, origin_count, origin_type, result_buf, result_count,
result_type, 1, 0, target_count, target_type, MPI_SUM, win);
if (ret)
errs++;
MPI_Type_size(origin_type, &origin_type_size);
MPI_Type_size(result_type, &result_type_size);
if (origin_count == 0 || origin_type_size == 0) {
ret = MPI_Put(NULL, origin_count, origin_type, 1, 0, target_count, target_type, win);
if (ret)
errs++;
ret = MPI_Get(NULL, origin_count, origin_type, 1, 0, target_count, target_type, win);
if (ret)
errs++;
ret = MPI_Accumulate(NULL, origin_count, origin_type, 1, 0, target_count, target_type,
MPI_SUM, win);
if (ret)
errs++;
ret = MPI_Get_accumulate(NULL, origin_count, origin_type, result_buf, result_count,
result_type, 1, 0, target_count, target_type, MPI_SUM, win);
if (ret)
errs++;
if (result_count == 0 || result_type_size == 0) {
ret = MPI_Get_accumulate(NULL, origin_count, origin_type, NULL, result_count,
result_type, 1, 0, target_count, target_type, MPI_SUM, win);
if (ret)
errs++;
}
}
return errs;
}
开发者ID:Julio-Anjos，项目名称:simgrid，代码行数:55，代码来源:badrma.c
示例4: dart_put
dart_ret_t dart_put(
dart_gptr_t gptr,
const void * src,
size_t nbytes)
{
MPI_Aint disp_s,
disp_rel;
MPI_Win win;
dart_unit_t target_unitid_abs;
uint64_t offset = gptr.addr_or_offs.offset;
int16_t seg_id = gptr.segid;
target_unitid_abs = gptr.unitid;
if (seg_id) {
uint16_t index = gptr.flags;
dart_unit_t target_unitid_rel;
win = dart_win_lists[index];
unit_g2l (index, target_unitid_abs, &target_unitid_rel);
if (dart_adapt_transtable_get_disp(
seg_id,
target_unitid_rel,
&disp_s) == -1) {
return DART_ERR_INVAL;
}
disp_rel = disp_s + offset;
MPI_Put(
src,
nbytes,
MPI_BYTE,
target_unitid_rel,
disp_rel,
nbytes,
MPI_BYTE,
win);
DART_LOG_DEBUG("dart_put: nbytes:%zu (from collective allocation) "
"target unit: %d offset: %"PRIu64"",
nbytes, target_unitid_abs, offset);
} else {
win = dart_win_local_alloc;
MPI_Put(
src,
nbytes,
MPI_BYTE,
target_unitid_abs,
offset,
nbytes,
MPI_BYTE,
win);
DART_LOG_DEBUG("dart_put: nbytes:%zu (from local allocation) "
"target unit: %d offset: %"PRIu64"",
nbytes, target_unitid_abs, offset);
}
return DART_OK;
}
开发者ID:dash-project，项目名称:dash，代码行数:53，代码来源:dart_communication.c
示例5: main
int main(int argc, char **argv){
int i, me, target;
unsigned int size;
double t, t_max;
MPI_Win win;
MPI_Init(&argc, &argv);
MPI_Comm_rank(MPI_COMM_WORLD, &me);
MPI_Win_create(&send_buf, sizeof(char)*MAX_SIZE, 1, MPI_INFO_NULL, MPI_COMM_WORLD, &win);
target = 1 - me;
MPI_Win_lock_all(0, win);
init_buf(send_buf, me);
if(me==0) print_items();
for(size=1;size<MAX_SIZE+1;size*=2){
MPI_Barrier(MPI_COMM_WORLD);
for(i=0;i<LOOP+WARMUP;i++){
if(WARMUP == i)
t = wtime();
if(me == 0){
MPI_Put(send_buf, size, MPI_CHAR, target, 0, size, MPI_CHAR, win);
MPI_Win_flush_local(target, win);
while(send_buf[0] == '0' || send_buf[size-1] == '0'){ MPI_Win_flush(me, win); }
send_buf[0] = '0'; send_buf[size-1] = '0';
}
else {
while(send_buf[0] == '1' || send_buf[size-1] == '1'){ MPI_Win_flush(me, win); }
send_buf[0] = '1'; send_buf[size-1] = '1';
MPI_Put(send_buf, size, MPI_CHAR, target, 0, size, MPI_CHAR, win);
MPI_Win_flush_local(target, win);
}
} //end of LOOP
t = wtime() - t;
MPI_Reduce(&t, &t_max, 1, MPI_DOUBLE, MPI_MAX, 0, MPI_COMM_WORLD);
if(me == 0)
print_results(size, t_max);
}
MPI_Win_unlock_all(win);
MPI_Win_free(&win);
MPI_Finalize();
return 0;
}
开发者ID:mnakao，项目名称:pingpong，代码行数:50，代码来源:mpi3_put.c
示例6: exchange
void exchange(field * temperature, parallel_data * parallel)
{
MPI_Win_fence(0, temperature->rma_window);
// Put upwards
MPI_Put(temperature->data[1], temperature->ny + 2, MPI_DOUBLE,
parallel->nup, (temperature->ny + 2) * (temperature->nx + 1),
temperature->ny + 2, MPI_DOUBLE, temperature->rma_window);
// Put downwards
MPI_Put(temperature->data[temperature->nx], temperature->ny + 2,
MPI_DOUBLE, parallel->ndown, 0, temperature->ny + 2,
MPI_DOUBLE, temperature->rma_window);
MPI_Win_fence(0, temperature->rma_window);
}
开发者ID:natj，项目名称:csc-ss14，代码行数:14，代码来源:ex13_heat_one_sided.c
示例7: message_rate
double message_rate (long * buffer, int size, int iterations, int me, int pairs, int nxtpe, MPI_Win win)
{
int64_t begin, end;
int i, offset;
/*
* Touch memory
*/
memset(buffer, size, MAX_MSG_SZ * ITERS_LARGE * sizeof(long));
MPI_Barrier(MPI_COMM_WORLD);
if (me < pairs) {
begin = TIME();
for (i = 0, offset = 0; i < iterations; i++, offset++) {
MPI_Put ((buffer + offset*size), size, MPI_LONG, nxtpe, offset*size, size, MPI_LONG, win);
//MPI_Win_flush_local (nxtpe, win);
}
//MPI_Win_flush_all(win);
MPI_Win_flush(nxtpe, win);
end = TIME();
return ((double)iterations * 1e6) / ((double)end - (double)begin);
}
return 0;
}
开发者ID:coti，项目名称:oshmpi，代码行数:27，代码来源:osu_mpi_put_mr.c
示例8: main
int main(int argc, char *argv[])
{
int rank, nprocs, A[SIZE2], B[SIZE2], i;
MPI_Win win;
int errs = 0;
MTest_Init(&argc,&argv);
MPI_Comm_size(MPI_COMM_WORLD,&nprocs);
MPI_Comm_rank(MPI_COMM_WORLD,&rank);
if (nprocs != 2) {
printf("Run this program with 2 processes\n");
MPI_Abort(MPI_COMM_WORLD,1);
}
if (rank == 0) {
for (i=0; i<SIZE2; i++) A[i] = B[i] = i;
MPI_Win_create(NULL, 0, 1, MPI_INFO_NULL, MPI_COMM_WORLD, &win);
for (i=0; i<SIZE1; i++) {
MPI_Win_lock(MPI_LOCK_SHARED, 1, 0, win);
MPI_Put(A+i, 1, MPI_INT, 1, i, 1, MPI_INT, win);
MPI_Win_unlock(1, win);
}
for (i=0; i<SIZE1; i++) {
MPI_Win_lock(MPI_LOCK_SHARED, 1, 0, win);
MPI_Get(B+i, 1, MPI_INT, 1, SIZE1+i, 1, MPI_INT, win);
MPI_Win_unlock(1, win);
}
MPI_Win_free(&win);
for (i=0; i<SIZE1; i++)
if (B[i] != (-4)*(i+SIZE1)) {
printf("Get Error: B[%d] is %d, should be %d\n", i, B[i], (-4)*(i+SIZE1));
errs++;
}
}
else { /* rank=1 */
for (i=0; i<SIZE2; i++) B[i] = (-4)*i;
MPI_Win_create(B, SIZE2*sizeof(int), sizeof(int), MPI_INFO_NULL,
MPI_COMM_WORLD, &win);
MPI_Win_free(&win);
for (i=0; i<SIZE1; i++) {
if (B[i] != i) {
printf("Put Error: B[%d] is %d, should be %d\n", i, B[i], i);
errs++;
}
}
}
/* if (rank==0) printf("Done\n");*/
MTest_Finalize(errs);
MPI_Finalize();
return 0;
}
开发者ID:huangjun-pg，项目名称:mpich2-yarn，代码行数:60，代码来源:test4.c
示例9: MPI_Comm_rank
void MPIMutex::lock(int proc) {
int rank, nproc, already_locked;
MPI_Comm_rank(comm, &rank);
MPI_Comm_size(comm, &nproc);
//std::cout << "trying to get lock" << std::endl;
MPI_Win_lock(MPI_LOCK_EXCLUSIVE, proc, 0, win);
byte *buff = (byte*)malloc(sizeof(byte)*nproc);
buff[rank] = 1;
MPI_Put(&(buff[rank]), 1, MPI_BYTE, proc, rank, 1, MPI_BYTE, win);
/* Get data to the left of rank */
if (rank > 0) {
MPI_Get(buff, rank, MPI_BYTE, proc, 0, rank, MPI_BYTE, win);
}
/* Get data to the right of rank */
if (rank < nproc - 1) {
MPI_Get(&(buff[rank+1]), nproc-1-rank, MPI_BYTE, proc, rank+1, nproc-1-rank,
MPI_BYTE, win);
}
MPI_Win_unlock(proc, win);
/* check if anyone has the lock*/
for (int i = already_locked = 0; i < nproc; i++)
if (buff[i] && i != rank)
already_locked = 1;
/* Wait for notification */
if (already_locked) {
MPI_Status status;
//std::cout << "waiting for notification [proc = "<<proc<<"]" << std::endl;
MPI_Recv(NULL, 0, MPI_BYTE, MPI_ANY_SOURCE, MPI_MUTEX_TAG+id, comm, &status);
}
//std::cout << "lock acquired [proc = "<<proc<<"]" << std::endl;
free(buff);
};
开发者ID:atrantan，项目名称:Distributed-Futures，代码行数:34，代码来源:MPIMutex.cpp
示例10: DO_OP_LOOP
void DO_OP_LOOP(int dst, int iter)
{
int i, x;
switch (OP_TYPE) {
case OP_ACC:
for (x = 0; x < iter; x++) {
for (i = 0; i < NOP; i++)
MPI_Accumulate(&locbuf[0], OP_SIZE, MPI_DOUBLE, dst, 0, OP_SIZE, MPI_DOUBLE,
MPI_SUM, win);
MPI_Win_flush(dst, win);
}
break;
case OP_PUT:
for (x = 0; x < iter; x++) {
for (i = 0; i < NOP; i++)
MPI_Put(&locbuf[0], OP_SIZE, MPI_DOUBLE, dst, 0, OP_SIZE, MPI_DOUBLE, win);
MPI_Win_flush(dst, win);
}
break;
case OP_GET:
for (x = 0; x < iter; x++) {
for (i = 0; i < NOP; i++)
MPI_Get(&locbuf[0], OP_SIZE, MPI_DOUBLE, dst, 0, OP_SIZE, MPI_DOUBLE, win);
MPI_Win_flush(dst, win);
}
break;
}
}
开发者ID:monicasee，项目名称:mpich.git.asp，代码行数:29，代码来源:op_overhead.c
示例11: gmr_put_typed
/** One-sided put operation with type arguments. Source buffer must be private.
*
* @param[in] mreg Memory region
* @param[in] src Address of source data
* @param[in] src_count Number of elements of the given type at the source
* @param[in] src_type MPI datatype of the source elements
* @param[in] dst Address of destination buffer
* @param[in] dst_count Number of elements of the given type at the destination
* @param[in] src_type MPI datatype of the destination elements
* @param[in] size Number of bytes to transfer
* @param[in] proc Absolute process id of target process
* @return 0 on success, non-zero on failure
*/
int gmr_put_typed(gmr_t *mreg, void *src, int src_count, MPI_Datatype src_type,
void *dst, int dst_count, MPI_Datatype dst_type, int proc) {
int grp_proc;
gmr_size_t disp;
MPI_Aint lb, extent;
grp_proc = ARMCII_Translate_absolute_to_group(&mreg->group, proc);
ARMCII_Assert(grp_proc >= 0);
// Calculate displacement from beginning of the window
if (dst == MPI_BOTTOM)
disp = 0;
else
disp = (gmr_size_t) ((uint8_t*)dst - (uint8_t*)mreg->slices[proc].base);
// Perform checks
MPI_Type_get_true_extent(dst_type, &lb, &extent);
ARMCII_Assert(mreg->lock_state != GMR_LOCK_UNLOCKED);
ARMCII_Assert_msg(disp >= 0 && disp < mreg->slices[proc].size, "Invalid remote address");
ARMCII_Assert_msg(disp + dst_count*extent <= mreg->slices[proc].size, "Transfer is out of range");
MPI_Put(src, src_count, src_type, grp_proc, (MPI_Aint) disp, dst_count, dst_type, mreg->window);
return 0;
}
开发者ID:abhinavvishnu，项目名称:matex，代码行数:39，代码来源:gmr.c
示例12: main
int main(int argc, char *argv[])
{
int errs = 0, err;
int rank, size;
int *buf, bufsize;
int *result;
int *rmabuf, rsize, rcount;
MPI_Comm comm;
MPI_Win win;
MPI_Request req;
MPI_Datatype derived_dtp;
MTest_Init(&argc, &argv);
bufsize = 256 * sizeof(int);
buf = (int *) malloc(bufsize);
if (!buf) {
fprintf(stderr, "Unable to allocated %d bytes\n", bufsize);
MPI_Abort(MPI_COMM_WORLD, 1);
}
result = (int *) malloc(bufsize);
if (!result) {
fprintf(stderr, "Unable to allocated %d bytes\n", bufsize);
MPI_Abort(MPI_COMM_WORLD, 1);
}
rcount = 16;
rsize = rcount * sizeof(int);
rmabuf = (int *) malloc(rsize);
if (!rmabuf) {
fprintf(stderr, "Unable to allocated %d bytes\n", rsize);
MPI_Abort(MPI_COMM_WORLD, 1);
}
MPI_Type_contiguous(2, MPI_INT, &derived_dtp);
MPI_Type_commit(&derived_dtp);
/* The following loop is used to run through a series of communicators
* that are subsets of MPI_COMM_WORLD, of size 1 or greater. */
while (MTestGetIntracommGeneral(&comm, 1, 1)) {
int count = 0;
if (comm == MPI_COMM_NULL)
continue;
/* Determine the sender and receiver */
MPI_Comm_rank(comm, &rank);
MPI_Comm_size(comm, &size);
MPI_Win_create(buf, bufsize, 2 * sizeof(int), MPI_INFO_NULL, comm, &win);
/* To improve reporting of problems about operations, we
* change the error handler to errors return */
MPI_Win_set_errhandler(win, MPI_ERRORS_RETURN);
/** TEST OPERATIONS USING ACTIVE TARGET (FENCE) SYNCHRONIZATION **/
MPI_Win_fence(0, win);
TEST_FENCE_OP("Put", MPI_Put(rmabuf, count, MPI_INT, TARGET, 0, count, MPI_INT, win);
);
TEST_FENCE_OP("Get", MPI_Get(rmabuf, count, MPI_INT, TARGET, 0, count, MPI_INT, win);
);
开发者ID:NexMirror，项目名称:MPICH，代码行数:60，代码来源:rmazero.c
示例13: benchmark
void benchmark (long * msg_buffer, int me, int pairs, int nxtpe, MPI_Win win)
{
static double mr, mr_sum;
int iters;
if (msg_buffer == NULL) {
printf("Input buffer is NULL, no reason to proceed\n");
exit(-1);
}
/*
* Warmup
*/
if (me < pairs) {
for (int i = 0; i < ITERS_LARGE; i += 1) {
MPI_Put ((msg_buffer + i*MAX_MSG_SZ), MAX_MSG_SZ, MPI_LONG, nxtpe, i*MAX_MSG_SZ, MAX_MSG_SZ, MPI_LONG, win);
MPI_Win_flush_local (nxtpe, win);
}
}
MPI_Win_flush_all(win);
MPI_Barrier(MPI_COMM_WORLD);
/*
* Benchmark
*/
for (long size = 1; size <= MAX_MSG_SZ; size <<= 1) {
iters = size < LARGE_THRESHOLD ? ITERS_SMALL : ITERS_LARGE;
mr = message_rate(msg_buffer, size, iters, me, pairs, nxtpe, win);
MPI_Reduce(&mr, &mr_sum, 1, MPI_DOUBLE, MPI_SUM, 0, MPI_COMM_WORLD);
print_message_rate(size, mr_sum, me);
}
}
开发者ID:coti，项目名称:oshmpi，代码行数:31，代码来源:osu_mpi_put_mr.c
示例14: _mpi_scalar_mput
static void _mpi_scalar_mput(const int target_rank,
const _XMP_coarray_t *dst_desc, const void *src,
const size_t dst_offset, const size_t src_offset,
const int dst_dims,
const _XMP_array_section_t *dst_info,
const bool is_dst_on_acc)
{
int allelmt_dim = _XMP_get_dim_of_allelmts(dst_dims, dst_info);
size_t element_size = dst_desc->elmt_size;
size_t allelmt_size = (allelmt_dim == dst_dims)? element_size : dst_info[allelmt_dim].distance * dst_info[allelmt_dim].elmts;
char *laddr = (allelmt_dim == dst_dims)? ((char*)src + src_offset) : _XMP_alloc(allelmt_size);
char *raddr = get_remote_addr(dst_desc, target_rank, is_dst_on_acc) + dst_offset;
MPI_Win win = get_window(dst_desc, is_dst_on_acc);
XACC_DEBUG("scalar_mput(src_p=%p, size=%zd, target=%d, dst_p=%p, is_acc=%d)", laddr, element_size, target_rank, raddr, is_dst_on_acc);
XACC_DEBUG("allelmt_dim=%d, dst_dims=%d", allelmt_dim, dst_dims);
if(allelmt_dim != dst_dims){
//mcopy
_XMP_array_section_t info;
info.start = 0;
info.length = allelmt_size/element_size;
info.stride = 1;
info.elmts = info.length;
info.distance = element_size;
_XMP_stride_memcpy_1dim(laddr, (char*)src+src_offset, &info, element_size, _XMP_SCALAR_MCOPY);
XACC_DEBUG("mcopy(%lld, %lld, %lld), %lld",info.start, info.length, info.stride, info.elmts);
}
long long idxs[allelmt_dim+1];
for(int i = 0; i < allelmt_dim+1; i++) idxs[i]=0;
while(1){
size_t offset = 0;
for(int i = 0; i < allelmt_dim; i++){
offset += dst_info[i].distance * idxs[i+1] * dst_info[i].stride;
}
MPI_Put((void*)laddr, allelmt_size, MPI_BYTE, target_rank,
(MPI_Aint)(raddr+offset), allelmt_size, MPI_BYTE,
win);
++idxs[allelmt_dim];
for(int i = allelmt_dim-1; i >= 0; i--){
long long length = dst_info[i].length;
if(idxs[i+1] >= length){
idxs[i+1] -= length;
++idxs[i];
}else{
break;
}
}
if(idxs[0] > 0){
break;
}
}
_wait_puts(target_rank, win);
if(allelmt_dim != dst_dims){
_XMP_free(laddr);
}
}
开发者ID:clementval，项目名称:omni-compiler-1，代码行数:60，代码来源:xmp_coarray_mpi.c
示例15: sizeof
void SweptDiscretization2D::updateRemoteConstants(unsigned char *buffer)
{
void *sendingBuffer = NULL;
FILE *inFile = NULL;
if(pg.rank == 0)
{
int bufferSize = this->remoteConstantsCount * n * n * pg.mpiSize * sizeof(double);
MPI_Alloc_mem(bufferSize, MPI_INFO_NULL, &sendingBuffer);
for(int r=0;r<pg.mpiSize;r++)
{
double *processing = (double*)sendingBuffer + (this->remoteConstantsCount * n * n * r);
int jIndex = (r % (pg.xNodes*pg.yNodes)) / pg.xNodes;
int iIndex = r % pg.xNodes;
for(int j=0;j<n;j++)
{
for(int i=0;i<n;i++)
{
int iGlobal = n*iIndex + (i);
int jGlobal = n*jIndex + (j);
int index = this->ijToConstantIndex(i,j);
int globalIndex = this->remoteConstantsCount * (iGlobal + jGlobal * n * pg.xNodes);
for(int k=0;k<this->remoteConstantsCount;k++)
{
processing[index + k] = ((double*)buffer)[k + globalIndex];
}
}
}
}
}
MPI_Win_fence(MPI_MODE_NOPRECEDE, this->constantsWindow);
if(pg.rank == 0)
{
for(int r=0;r<pg.mpiSize;r++)
{
MPI_Put((unsigned char*)sendingBuffer + (r * remoteConstantsCount * n * n * sizeof(double)), remoteConstantsCount * n * n * sizeof(double), MPI_BYTE, r, 0, remoteConstantsCount * n * n * sizeof(double), MPI_BYTE, constantsWindow);
}
}
MPI_Win_fence((MPI_MODE_NOSTORE | MPI_MODE_NOSUCCEED), this->constantsWindow);
if(pg.rank == 0)
{
MPI_Free_mem(sendingBuffer);
}
for(int i=1;i<n+1;i++)
{
for(int j=1;j<n+1;j++)
{
for(int k=0;k<this->remoteConstantsCount;k++)
{
int windowIndex = this->ijToConstantIndex(i-1,j-1);
int foundationIndex = this->ijToIndex(i,j);
this->foundation[foundationIndex + k] = this->remoteConstants[windowIndex + k];
}
}
}
}
开发者ID:hubailmm，项目名称:Euler2D，代码行数:59，代码来源:SweptDiscretization2D.cpp
示例16: add_scatter_constant_request
void add_scatter_constant_request(scatter_constant * sc, int remote_rank,
size_t remote_idx, size_t req_id)
{
assert(sc->valid);
#pragma omp critical
MPI_Put(sc->constant, 1, sc->datatype, remote_rank, remote_idx, 1,
sc->datatype, sc->win);
}
开发者ID:emc2314，项目名称:Graph500，代码行数:8，代码来源:onesided.c
示例17: add_scatter_request
void add_scatter_request(scatter* sc, const char* local_data, int remote_rank, size_t remote_idx, size_t req_id) {
assert (sc->valid);
assert (sc->request_count < sc->nrequests_max);
memcpy(sc->send_data + sc->request_count * sc->elt_size, local_data, sc->elt_size);
#pragma omp critical
MPI_Put(sc->send_data + sc->request_count * sc->elt_size, 1, sc->datatype, remote_rank, remote_idx, 1, sc->datatype, sc->win);
++sc->request_count;
}
开发者ID:RockyMeadow，项目名称:SimgridServerService，代码行数:8，代码来源:onesided.c
示例18: main
int main(int argc, char *argv[])
{
int errs = 0, err;
int rank, size;
int *buf, bufsize;
int *result;
int *rmabuf, rsize, rcount;
MPI_Comm comm;
MPI_Win win;
MPI_Request req;
MTest_Init(&argc, &argv);
bufsize = 256 * sizeof(int);
buf = (int *) malloc(bufsize);
if (!buf) {
fprintf(stderr, "Unable to allocated %d bytes\n", bufsize);
MPI_Abort(MPI_COMM_WORLD, 1);
}
result = (int *) malloc(bufsize);
if (!result) {
fprintf(stderr, "Unable to allocated %d bytes\n", bufsize);
MPI_Abort(MPI_COMM_WORLD, 1);
}
rcount = 16;
rsize = rcount * sizeof(int);
rmabuf = (int *) malloc(rsize);
if (!rmabuf) {
fprintf(stderr, "Unable to allocated %d bytes\n", rsize);
MPI_Abort(MPI_COMM_WORLD, 1);
}
/* The following illustrates the use of the routines to
* run through a selection of communicators and datatypes.
* Use subsets of these for tests that do not involve combinations
* of communicators, datatypes, and counts of datatypes */
while (MTestGetIntracommGeneral(&comm, 1, 1)) {
if (comm == MPI_COMM_NULL)
continue;
/* Determine the sender and receiver */
MPI_Comm_rank(comm, &rank);
MPI_Comm_size(comm, &size);
MPI_Win_create(buf, bufsize, sizeof(int), MPI_INFO_NULL, comm, &win);
/* To improve reporting of problems about operations, we
* change the error handler to errors return */
MPI_Win_set_errhandler(win, MPI_ERRORS_RETURN);
/** TEST OPERATIONS USING ACTIVE TARGET (FENCE) SYNCHRONIZATION **/
MPI_Win_fence(0, win);
TEST_FENCE_OP("Put",
MPI_Put(rmabuf, rcount, MPI_INT, MPI_PROC_NULL, 0, rcount, MPI_INT, win);
);
TEST_FENCE_OP("Get",
MPI_Get(rmabuf, rcount, MPI_INT, MPI_PROC_NULL, 0, rcount, MPI_INT, win);
);
开发者ID:NexMirror，项目名称:MPICH，代码行数:58，代码来源:rmanull.c
示例19: GlobalToLocalType
void Master::UpdateCriticalAttribute(Attribute attr, AgentId agent_id, AgentType agent_type, void* location) {
AgentType type = GlobalToLocalType(agent_id);
auto p = std::make_pair(type, attr);
size_t target_disp = critical_agents_offsets_.at(agent_id) + critical_attributes_offsets_.at(p);
MPI_Datatype attribute_type = attributes_MPI_types_.at(p);
for (MasterId id=0; id<nb_masters_; id++) {
MPI_Put(location, 1, attribute_type, id, target_disp, 1, attribute_type, critical_window_);
}
}
开发者ID:assasim，项目名称:assasim，代码行数:9，代码来源:master.cpp
示例20: MPIX_Mutex_lock
/** Lock a mutex.
*
* @param[in] hdl Mutex group that the mutex belongs to
* @param[in] mutex Desired mutex number [0..count-1]
* @param[in] proc Rank of process where the mutex lives
* @return MPI status
*/
int MPIX_Mutex_lock(MPIX_Mutex hdl, int mutex, int proc)
{
int rank, nproc, already_locked, i;
uint8_t *buf;
assert(mutex >= 0 && mutex < hdl->max_count);
MPI_Comm_rank(hdl->comm, &rank);
MPI_Comm_size(hdl->comm, &nproc);
assert(proc >= 0 && proc < nproc);
buf = malloc(nproc * sizeof(uint8_t));
assert(buf != NULL);
buf[rank] = 1;
/* Get all data from the lock_buf, except the byte belonging to
* me. Set the byte belonging to me to 1. */
MPI_Win_lock(MPI_LOCK_EXCLUSIVE, proc, 0, hdl->windows[mutex]);
MPI_Put(&buf[rank], 1, MPI_BYTE, proc, rank, 1, MPI_BYTE, hdl->windows[mutex]);
/* Get data to the left of rank */
if (rank > 0) {
MPI_Get(buf, rank, MPI_BYTE, proc, 0, rank, MPI_BYTE, hdl->windows[mutex]);
}
/* Get data to the right of rank */
if (rank < nproc - 1) {
MPI_Get(&buf[rank + 1], nproc - 1 - rank, MPI_BYTE, proc, rank + 1, nproc - 1 - rank,
MPI_BYTE, hdl->windows[mutex]);
}
MPI_Win_unlock(proc, hdl->windows[mutex]);
assert(buf[rank] == 1);
for (i = already_locked = 0; i < nproc; i++)
if (buf[i] && i != rank)
already_locked = 1;
/* Wait for notification */
if (already_locked) {
MPI_Status status;
debug_print("waiting for notification [proc = %d, mutex = %d]\n", proc, mutex);
MPI_Recv(NULL, 0, MPI_BYTE, MPI_ANY_SOURCE, MPIX_MUTEX_TAG + mutex, hdl->comm, &status);
}
debug_print("lock acquired [proc = %d, mutex = %d]\n", proc, mutex);
free(buf);
return MPI_SUCCESS;
}
开发者ID:abhinavvishnu，项目名称:matex，代码行数:61，代码来源:mutex_lock.c
注：本文中的MPI_Put函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论