C++ MSM_BUS_ERR函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MSM_BUS_ERR函数的典型用法代码示例。如果您正苦于以下问题：C++ MSM_BUS_ERR函数的具体用法？C++ MSM_BUS_ERR怎么用？C++ MSM_BUS_ERR使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MSM_BUS_ERR函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: msm_bus_agg_fab_clks

static int msm_bus_agg_fab_clks(struct device *bus_dev, void *data)
{
	struct msm_bus_node_device_type *node = NULL;
	int ret = 0;
	int ctx = *(int *)data;

	if (ctx >= NUM_CTX) {
		MSM_BUS_ERR("%s: Invalid Context %d", __func__, ctx);
		goto exit_agg_fab_clks;
	}

	node = bus_dev->platform_data;
	if (!node) {
		MSM_BUS_ERR("%s: Can't get device info", __func__);
		goto exit_agg_fab_clks;
	}

	if (!node->node_info->is_fab_dev) {
		struct msm_bus_node_device_type *bus_dev = NULL;

		bus_dev = node->node_info->bus_device->platform_data;

		if (node->cur_clk_hz[ctx] >= bus_dev->cur_clk_hz[ctx])
			bus_dev->cur_clk_hz[ctx] = node->cur_clk_hz[ctx];
	}

exit_agg_fab_clks:
	return ret;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:29，代码来源:msm_bus_fabric_adhoc.c

示例2: msm_bus_dev_init_qos

static int msm_bus_dev_init_qos(struct device *dev, void *data)
{
	int ret = 0;
	struct msm_bus_node_device_type *node_dev = NULL;

	node_dev = dev->platform_data;

	if (!node_dev) {
		MSM_BUS_ERR("%s: Unable to get node device info" , __func__);
		ret = -ENXIO;
		goto exit_init_qos;
	}

	MSM_BUS_DBG("Device = %d", node_dev->node_info->id);

	if (node_dev->ap_owned) {
		struct msm_bus_node_device_type *bus_node_info;

		bus_node_info = node_dev->node_info->bus_device->platform_data;

		if (!bus_node_info) {
			MSM_BUS_ERR("%s: Unable to get bus device infofor %d",
				__func__,
				node_dev->node_info->id);
			ret = -ENXIO;
			goto exit_init_qos;
		}

		if (bus_node_info->fabdev &&
			bus_node_info->fabdev->noc_ops.qos_init) {
			int ret = 0;

			if (node_dev->ap_owned &&
				(node_dev->node_info->qos_params.mode) != -1) {

				if (bus_node_info->fabdev->bypass_qos_prg)
					goto exit_init_qos;

				ret = msm_bus_qos_enable_clk(node_dev);
				if (ret < 0) {
					MSM_BUS_ERR("Can't Enable QoS clk %d",
					node_dev->node_info->id);
					goto exit_init_qos;
				}

				bus_node_info->fabdev->noc_ops.qos_init(
					node_dev,
					bus_node_info->fabdev->qos_base,
					bus_node_info->fabdev->base_offset,
					bus_node_info->fabdev->qos_off,
					bus_node_info->fabdev->qos_freq);
				msm_bus_qos_disable_clk(node_dev, ret);
			}
		} else
			MSM_BUS_ERR("%s: Skipping QOS init for %d",
				__func__, node_dev->node_info->id);
	}
exit_init_qos:
	return ret;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:60，代码来源:msm_bus_fabric_adhoc.c

示例3: flush_clk_data

static int flush_clk_data(struct device *node_device, int ctx)
{
	struct msm_bus_node_device_type *node;
	struct nodeclk *nodeclk = NULL;
	int ret = 0;

	node = node_device->platform_data;
	if (!node) {
		MSM_BUS_ERR("%s: Unable to find bus device for device %d",
			__func__, node->node_info->id);
		ret = -ENODEV;
		goto exit_flush_clk_data;
	}

	nodeclk = &node->clk[ctx];
	if (node->node_info->is_fab_dev) {
		if (nodeclk->rate != node->cur_clk_hz[ctx]) {
			nodeclk->rate = node->cur_clk_hz[ctx];
			nodeclk->dirty = true;
		}
	}

	if (nodeclk && nodeclk->clk && nodeclk->dirty) {
		long rounded_rate;

		if (nodeclk->rate) {
			rounded_rate = clk_round_rate(nodeclk->clk,
							nodeclk->rate);
			ret = setrate_nodeclk(nodeclk, rounded_rate);

			if (ret) {
				MSM_BUS_ERR("%s: Failed to set_rate %lu for %d",
					__func__, rounded_rate,
						node->node_info->id);
				ret = -ENODEV;
				goto exit_flush_clk_data;
			}

			ret = enable_nodeclk(nodeclk);
		} else
			ret = disable_nodeclk(nodeclk);

		if (ret) {
			MSM_BUS_ERR("%s: Failed to enable for %d", __func__,
						node->node_info->id);
			ret = -ENODEV;
			goto exit_flush_clk_data;
		}
		MSM_BUS_DBG("%s: Updated %d clk to %llu", __func__,
				node->node_info->id, nodeclk->rate);

	}
exit_flush_clk_data:
	/* Reset the aggregated clock rate for fab devices*/
	if (node->node_info->is_fab_dev)
		node->cur_clk_hz[ctx] = 0;

	nodeclk->dirty = 0;
	return ret;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:60，代码来源:msm_bus_fabric_adhoc.c

示例4: msm_bus_commit_data

int msm_bus_commit_data(int *dirty_nodes, int ctx, int num_dirty)
{
	int ret = 0;
	int i = 0;

	/* Aggregate the bus clocks */
	bus_for_each_dev(&msm_bus_type, NULL, (void *)&ctx,
				msm_bus_agg_fab_clks);

	for (i = 0; i < num_dirty; i++) {
		struct device *node_device =
					bus_find_device(&msm_bus_type, NULL,
						(void *)&dirty_nodes[i],
						msm_bus_device_match_adhoc);

		ret = flush_bw_data(node_device, ctx);
		if (ret)
			MSM_BUS_ERR("%s: Error flushing bw data for node %d",
					__func__, dirty_nodes[i]);

		ret = flush_clk_data(node_device, ctx);
		if (ret)
			MSM_BUS_ERR("%s: Error flushing clk data for node %d",
					__func__, dirty_nodes[i]);
	}
	kfree(dirty_nodes);
	/* Aggregate the bus clocks */
	bus_for_each_dev(&msm_bus_type, NULL, (void *)&ctx,
				msm_bus_reset_fab_clks);
	return ret;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:31，代码来源:msm_bus_fabric_adhoc.c

示例5: get_vfe_bw

static uint64_t get_vfe_bw(void)
{
	int vfe_id = MSM_BUS_MASTER_VFE;
	int iid = msm_bus_board_get_iid(vfe_id);
	int fabid;
	struct msm_bus_fabric_device *fabdev;
	struct msm_bus_inode_info *info;
	uint64_t vfe_bw = 0;

	fabid = GET_FABID(iid);
	fabdev = msm_bus_get_fabric_device(fabid);
	if (!fabdev) {
		MSM_BUS_ERR("Fabric not found for: %d\n", fabid);
		goto exit_get_vfe_bw;
	}
	info = fabdev->algo->find_node(fabdev, iid);
	if (!info) {
		MSM_BUS_ERR("%s: Can't find node %d", __func__,
						vfe_id);
		goto exit_get_vfe_bw;
	}

	vfe_bw = get_node_sumab(info);
	MSM_BUS_DBG("vfe_ab %llu", vfe_bw);

exit_get_vfe_bw:
	return vfe_bw;
}

开发者ID:moonlightly，项目名称:NX523J_kernel，代码行数:28，代码来源:msm_bus_arb.c

示例6: setup_nr_limits

static void setup_nr_limits(int curr, int pnode)
{
	struct msm_bus_fabric_device *fabdev =
		msm_bus_get_fabric_device(GET_FABID(curr));
	struct msm_bus_inode_info *info;

	if (!fabdev) {
		MSM_BUS_WARN("Fabric Not yet registered. Try again\n");
		goto exit_setup_nr_limits;
	}

	/* This logic is currently applicable to BIMC masters only */
	if (fabdev->id != MSM_BUS_FAB_DEFAULT) {
		MSM_BUS_ERR("Static limiting of NR masters only for BIMC\n");
		goto exit_setup_nr_limits;
	}

	info = fabdev->algo->find_node(fabdev, curr);
	if (!info) {
		MSM_BUS_ERR("Cannot find node info!\n");
		goto exit_setup_nr_limits;
	}

	compute_nr_limits(fabdev, pnode);
exit_setup_nr_limits:
	return;
}

开发者ID:moonlightly，项目名称:NX523J_kernel，代码行数:27，代码来源:msm_bus_arb.c

示例7: msm_bus_init_clk

static int msm_bus_init_clk(struct device *bus_dev,
				struct msm_bus_node_device_type *pdata)
{
	unsigned int ctx;
	int ret = 0;
	struct msm_bus_node_device_type *node_dev = bus_dev->platform_data;

	for (ctx = 0; ctx < NUM_CTX; ctx++) {
		if (!IS_ERR_OR_NULL(pdata->clk[ctx].clk)) {
			node_dev->clk[ctx].clk = pdata->clk[ctx].clk;
			node_dev->clk[ctx].enable = false;
			node_dev->clk[ctx].dirty = false;
			MSM_BUS_ERR("%s: Valid node clk node %d ctx %d",
				__func__, node_dev->node_info->id, ctx);
		}
	}

	if (!IS_ERR_OR_NULL(pdata->qos_clk.clk)) {
		node_dev->qos_clk.clk = pdata->qos_clk.clk;
		node_dev->qos_clk.enable = false;
		MSM_BUS_ERR("%s: Valid Iface clk node %d", __func__,
						node_dev->node_info->id);
	}

	return ret;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:26，代码来源:msm_bus_fabric_adhoc.c

示例8: send_rpm_msg

static int send_rpm_msg(struct device *device)
{
	int ret = 0;
	int ctx;
	int rsc_type;
	struct msm_bus_node_device_type *ndev =
					device->platform_data;
	struct msm_rpm_kvp rpm_kvp;

	if (!ndev) {
		MSM_BUS_ERR("%s: Error getting node info.", __func__);
		ret = -ENODEV;
		goto exit_send_rpm_msg;
	}

	rpm_kvp.length = sizeof(uint64_t);
	rpm_kvp.key = RPM_MASTER_FIELD_BW;

	for (ctx = MSM_RPM_CTX_ACTIVE_SET; ctx <= MSM_RPM_CTX_SLEEP_SET;
					ctx++) {
		if (ctx == MSM_RPM_CTX_ACTIVE_SET)
			rpm_kvp.data =
			(uint8_t *)&ndev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET];
		else {
			rpm_kvp.data =
			(uint8_t *) &ndev->node_ab.ab[MSM_RPM_CTX_SLEEP_SET];
		}

		if (ndev->node_info->mas_rpm_id != -1) {
			rsc_type = RPM_BUS_MASTER_REQ;
			ret = msm_rpm_send_message(ctx, rsc_type,
				ndev->node_info->mas_rpm_id, &rpm_kvp, 1);
			if (ret) {
				MSM_BUS_ERR("%s: Failed to send RPM message:",
						__func__);
				MSM_BUS_ERR("%s:Node Id %d RPM id %d",
				__func__, ndev->node_info->id,
					 ndev->node_info->mas_rpm_id);
				goto exit_send_rpm_msg;
			}
		}

		if (ndev->node_info->slv_rpm_id != -1) {
			rsc_type = RPM_BUS_SLAVE_REQ;
			ret = msm_rpm_send_message(ctx, rsc_type,
				ndev->node_info->slv_rpm_id, &rpm_kvp, 1);
			if (ret) {
				MSM_BUS_ERR("%s: Failed to send RPM message:",
							__func__);
				MSM_BUS_ERR("%s: Node Id %d RPM id %d",
				__func__, ndev->node_info->id,
					ndev->node_info->slv_rpm_id);
				goto exit_send_rpm_msg;
			}
		}
	}
exit_send_rpm_msg:
	return ret;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:59，代码来源:msm_bus_fabric_adhoc.c

示例9: msm_bus_update_clks

int msm_bus_update_clks(struct msm_bus_node_device_type *nodedev,
		int ctx, int **dirty_nodes, int *num_dirty)
{
	int status = 0;
	struct nodeclk *nodeclk;
	struct nodeclk *busclk;
	struct msm_bus_node_device_type *bus_info = NULL;
	uint64_t req_clk;

	bus_info = nodedev->node_info->bus_device->platform_data;

	if (!bus_info) {
		MSM_BUS_ERR("%s: Unable to find bus device for device %d",
			__func__, nodedev->node_info->id);
		status = -ENODEV;
		goto exit_set_clks;
	}

	req_clk = nodedev->cur_clk_hz[ctx];
	busclk = &bus_info->clk[ctx];

	if (busclk->rate != req_clk) {
		busclk->rate = req_clk;
		busclk->dirty = 1;
		MSM_BUS_DBG("%s: Modifying bus clk %d Rate %llu", __func__,
					bus_info->node_info->id, req_clk);
		status = add_dirty_node(dirty_nodes, bus_info->node_info->id,
								num_dirty);

		if (status) {
			MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__,
						bus_info->node_info->id);
			goto exit_set_clks;
		}
	}

	req_clk = nodedev->cur_clk_hz[ctx];
	nodeclk = &nodedev->clk[ctx];

	if (IS_ERR_OR_NULL(nodeclk))
		goto exit_set_clks;

	if (!nodeclk->dirty || (nodeclk->dirty && (nodeclk->rate < req_clk))) {
		nodeclk->rate = req_clk;
		nodeclk->dirty = 1;
		MSM_BUS_DBG("%s: Modifying node clk %d Rate %llu", __func__,
					nodedev->node_info->id, req_clk);
		status = add_dirty_node(dirty_nodes, nodedev->node_info->id,
								num_dirty);
		if (status) {
			MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__,
						nodedev->node_info->id);
			goto exit_set_clks;
		}
	}

exit_set_clks:
	return status;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:59，代码来源:msm_bus_fabric_adhoc.c

示例10: msm_bus_qos_enable_clk

static int msm_bus_qos_enable_clk(struct msm_bus_node_device_type *node)
{
	struct msm_bus_node_device_type *bus_node = NULL;
	long rounded_rate;
	int ret = 0;
	int bus_qos_enabled = 0;

	if (!node) {
		ret = -ENXIO;
		goto exit_enable_qos_clk;
	}

	bus_node = node->node_info->bus_device->platform_data;

	if (!bus_node) {
		ret = -ENXIO;
		goto exit_enable_qos_clk;
	}

	if (!clk_get_rate(bus_node->clk[DUAL_CTX].clk)) {
		rounded_rate = clk_round_rate(bus_node->clk[DUAL_CTX].clk, 1);
		ret = setrate_nodeclk(&bus_node->clk[DUAL_CTX], rounded_rate);
		if (ret) {
			MSM_BUS_ERR("%s: Failed to set bus clk, node %d",
				__func__, node->node_info->id);
			goto exit_enable_qos_clk;
		}

		ret = enable_nodeclk(&bus_node->clk[DUAL_CTX]);
		if (ret) {
			MSM_BUS_ERR("%s: Failed to enable bus clk, node %d",
				__func__, node->node_info->id);
			goto exit_enable_qos_clk;
		}
		bus_qos_enabled = 1;
	}

	if (!IS_ERR_OR_NULL(node->qos_clk.clk)) {
		rounded_rate = clk_round_rate(node->qos_clk.clk, 1);
		ret = setrate_nodeclk(&node->qos_clk, rounded_rate);
		if (ret) {
			MSM_BUS_ERR("Failed to set bus clk, node %d",
			 node->node_info->id);
			goto exit_enable_qos_clk;
		}

		ret = enable_nodeclk(&node->qos_clk);
		if (ret) {
			MSM_BUS_ERR("Err enable mas qos clk, node %d ret %d",
				node->node_info->id, ret);
			goto exit_enable_qos_clk;
		}
	}
	ret = bus_qos_enabled;

exit_enable_qos_clk:
	return ret;
}

开发者ID:SiddheshK15，项目名称:kernel_htc_820，代码行数:58，代码来源:msm_bus_fabric_adhoc.c

示例11: reset_pnodes

int reset_pnodes(int curr, int pnode)
{
	struct msm_bus_inode_info *info;
	struct msm_bus_fabric_device *fabdev;
	int index, next_pnode;
	fabdev = msm_bus_get_fabric_device(GET_FABID(curr));
	if (!fabdev) {
		MSM_BUS_ERR("Fabric not found for: %d\n",
			(GET_FABID(curr)));
			return -ENXIO;
	}

	index = GET_INDEX(pnode);
	info = fabdev->algo->find_node(fabdev, curr);
	if (!info) {
		MSM_BUS_ERR("Cannot find node info!\n");
		return -ENXIO;
	}

	MSM_BUS_DBG("Starting the loop--remove\n");
	do {
		struct msm_bus_inode_info *hop;
		fabdev = msm_bus_get_fabric_device(GET_FABID(curr));
		if (!fabdev) {
			MSM_BUS_ERR("Fabric not found\n");
				return -ENXIO;
		}

		next_pnode = info->pnode[index].next;
		info->pnode[index].next = -2;
		curr = GET_NODE(next_pnode);
		index = GET_INDEX(next_pnode);
		if (IS_NODE(curr))
			hop = fabdev->algo->find_node(fabdev, curr);
		else
			hop = fabdev->algo->find_gw_node(fabdev, curr);
		if (!hop) {
			MSM_BUS_ERR("Null Info found for hop\n");
			return -ENXIO;
		}

		MSM_BUS_DBG("%d[%d] = %d\n", info->node_info->priv_id, index,
			info->pnode[index].next);
		MSM_BUS_DBG("num_pnodes: %d: %d\n", info->node_info->priv_id,
			info->num_pnodes);
		info = hop;
	} while (GET_NODE(info->pnode[index].next) != info->node_info->priv_id);

	info->pnode[index].next = -2;
	MSM_BUS_DBG("%d[%d] = %d\n", info->node_info->priv_id, index,
		info->pnode[index].next);
	MSM_BUS_DBG("num_pnodes: %d: %d\n", info->node_info->priv_id,
		info->num_pnodes);
	return 0;
}

开发者ID:Fuzion24，项目名称:SM-G900V_NA_KK_Opensource-S5-Kernel-，代码行数:55，代码来源:msm_bus_arb.c

示例12: msm_bus_fabric_init

static int msm_bus_fabric_init(struct device *dev,
			struct msm_bus_node_device_type *pdata)
{
	struct msm_bus_fab_device_type *fabdev;
	struct msm_bus_node_device_type *node_dev = NULL;
	int ret = 0;

	node_dev = dev->platform_data;
	if (!node_dev) {
		MSM_BUS_ERR("%s: Unable to get bus device info" , __func__);
		ret = -ENXIO;
		goto exit_fabric_init;
	}

	if (node_dev->node_info->virt_dev) {
		MSM_BUS_ERR("%s: Skip Fab init for virtual device %d", __func__,
						node_dev->node_info->id);
		goto exit_fabric_init;
	}

	fabdev = devm_kzalloc(dev, sizeof(struct msm_bus_fab_device_type),
								GFP_KERNEL);
	if (!fabdev) {
		MSM_BUS_ERR("Fabric alloc failed\n");
		ret = -ENOMEM;
		goto exit_fabric_init;
	}

	node_dev->fabdev = fabdev;
	fabdev->pqos_base = pdata->fabdev->pqos_base;
	fabdev->qos_range = pdata->fabdev->qos_range;
	fabdev->base_offset = pdata->fabdev->base_offset;
	fabdev->qos_off = pdata->fabdev->qos_off;
	fabdev->qos_freq = pdata->fabdev->qos_freq;
	fabdev->bus_type = pdata->fabdev->bus_type;
	fabdev->bypass_qos_prg = pdata->fabdev->bypass_qos_prg;
	msm_bus_fab_init_noc_ops(node_dev);

	fabdev->qos_base = devm_ioremap(dev,
				fabdev->pqos_base, fabdev->qos_range);
	if (!fabdev->qos_base) {
		MSM_BUS_ERR("%s: Error remapping address 0x%zx :bus device %d",
			__func__,
			 (size_t)fabdev->pqos_base, node_dev->node_info->id);
		ret = -ENOMEM;
		goto exit_fabric_init;
	}

	/*if (msmbus_coresight_init(pdev))
		pr_warn("Coresight support absent for bus: %d\n", pdata->id);*/
exit_fabric_init:
	return ret;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:53，代码来源:msm_bus_fabric_adhoc.c

示例13: msm_bus_device_init_driver

int __init msm_bus_device_init_driver(void)
{
	int rc;

	MSM_BUS_ERR("msm_bus_fabric_init_driver\n");
	rc =  platform_driver_register(&msm_bus_device_driver);

	if (rc) {
		MSM_BUS_ERR("Failed to register bus device driver");
		return rc;
	}
	return platform_driver_register(&msm_bus_rules_driver);
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:13，代码来源:msm_bus_fabric_adhoc.c

示例14: msm_bus_rpm_commit_arb

static int msm_bus_rpm_commit_arb(struct msm_bus_fabric_registration
	*fab_pdata, int ctx, void *rpm_data,
	struct commit_data *cd, bool valid)
{
	int i, status = 0, rsc_type, key;

	MSM_BUS_DBG("Context: %d\n", ctx);
	rsc_type = RPM_BUS_MASTER_REQ;
	key = RPM_MASTER_FIELD_BW;
	for (i = 0; i < fab_pdata->nmasters; i++) {
		if (cd->mas_arb[i].dirty) {
			MSM_BUS_DBG("MAS HWID: %d, BW: %llu DIRTY: %d\n",
				cd->mas_arb[i].hw_id,
				cd->mas_arb[i].bw,
				cd->mas_arb[i].dirty);
			status = msm_bus_rpm_req(ctx, rsc_type, key,
				&cd->mas_arb[i], valid);
			if (status) {
				MSM_BUS_ERR("RPM: Req fail: mas:%d, bw:%llu\n",
					cd->mas_arb[i].hw_id,
					cd->mas_arb[i].bw);
				break;
			} else {
				cd->mas_arb[i].dirty = false;
			}
		}
	}

	rsc_type = RPM_BUS_SLAVE_REQ;
	key = RPM_SLAVE_FIELD_BW;
	for (i = 0; i < fab_pdata->nslaves; i++) {
		if (cd->slv_arb[i].dirty) {
			MSM_BUS_DBG("SLV HWID: %d, BW: %llu DIRTY: %d\n",
				cd->slv_arb[i].hw_id,
				cd->slv_arb[i].bw,
				cd->slv_arb[i].dirty);
			status = msm_bus_rpm_req(ctx, rsc_type, key,
				&cd->slv_arb[i], valid);
			if (status) {
				MSM_BUS_ERR("RPM: Req fail: slv:%d, bw:%llu\n",
					cd->slv_arb[i].hw_id,
					cd->slv_arb[i].bw);
				break;
			} else {
				cd->slv_arb[i].dirty = false;
			}
		}
	}

	return status;
}

开发者ID:1n，项目名称:xperia-m-source，代码行数:51，代码来源:msm_bus_rpm_smd.c

示例15: msm_bus_setup_dev_conn

static int msm_bus_setup_dev_conn(struct device *bus_dev, void *data)
{
	struct msm_bus_node_device_type *bus_node = NULL;
	int ret = 0;
	int j;

	bus_node = bus_dev->platform_data;
	if (!bus_node) {
		MSM_BUS_ERR("%s: Can't get device info", __func__);
		ret = -ENODEV;
		goto exit_setup_dev_conn;
	}

	/* Setup parent bus device for this node */
	if (!bus_node->node_info->is_fab_dev) {
		struct device *bus_parent_device =
			bus_find_device(&msm_bus_type, NULL,
				(void *)&bus_node->node_info->bus_device_id,
				msm_bus_device_match_adhoc);

		if (!bus_parent_device) {
			MSM_BUS_ERR("%s: Error finding parentdev %d parent %d",
				__func__,
				bus_node->node_info->id,
				bus_node->node_info->bus_device_id);
			ret = -ENXIO;
			goto exit_setup_dev_conn;
		}
		bus_node->node_info->bus_device = bus_parent_device;
	}

	for (j = 0; j < bus_node->node_info->num_connections; j++) {
		bus_node->node_info->dev_connections[j] =
			bus_find_device(&msm_bus_type, NULL,
				(void *)&bus_node->node_info->connections[j],
				msm_bus_device_match_adhoc);

		if (!bus_node->node_info->dev_connections[j]) {
			MSM_BUS_ERR("%s: Error finding conn %d for device %d",
				__func__, bus_node->node_info->connections[j],
				 bus_node->node_info->id);
			ret = -ENODEV;
			goto exit_setup_dev_conn;
		}
	}

exit_setup_dev_conn:
	return ret;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:49，代码来源:msm_bus_fabric_adhoc.c

示例16: msm_bus_rpm_is_mem_interleaved

bool msm_bus_rpm_is_mem_interleaved(void)
{
	int status = 0;
	struct msm_rpm_iv_pair il[2];
	uint16_t id[2];

	il[0].value = 0;
	il[1].value = 0;
	status = msm_bus_board_rpm_get_il_ids(id);
	if (status) {
		MSM_BUS_DBG("Dynamic check not supported, "
			"default: Interleaved memory\n");
		goto inter;
	}

	il[0].id = id[0];
	il[1].id = id[1];
	status = msm_rpm_get_status(il, ARRAY_SIZE(il));
	if (status) {
		MSM_BUS_ERR("Status read for interleaving returned: %d\n"
			"Using interleaved memory by default\n",
			status);
		goto inter;
	}

	if ((il[0].value & 0xFFFF0000) != (il[1].value & 0xFFFF0000)) {
		MSM_BUS_DBG("Non-interleaved memory\n");
		return false;
	}

inter:
	MSM_BUS_DBG("Interleaved memory\n");
	return true;
}

开发者ID:Drgravy，项目名称:kernel_htc_m7，代码行数:34，代码来源:msm_bus_rpm.c

示例17: msm_bus_node_debug

static int msm_bus_node_debug(struct device *bus_dev, void *data)
{
	int j;
	int ret = 0;
	struct msm_bus_node_device_type *bus_node = NULL;

	bus_node = bus_dev->platform_data;
	if (!bus_node) {
		MSM_BUS_ERR("%s: Can't get device info", __func__);
		ret = -ENODEV;
		goto exit_node_debug;
	}

	MSM_BUS_DBG("Device = %d buswidth %u", bus_node->node_info->id,
				bus_node->node_info->buswidth);
	for (j = 0; j < bus_node->node_info->num_connections; j++) {
		struct msm_bus_node_device_type *bdev =
			(struct msm_bus_node_device_type *)
			bus_node->node_info->dev_connections[j]->platform_data;
		MSM_BUS_DBG("\n\t Connection[%d] %d", j, bdev->node_info->id);
	}

exit_node_debug:
	return ret;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:25，代码来源:msm_bus_fabric_adhoc.c

示例18: devm_kfree

void *msm_bus_realloc_devmem(struct device *dev, void *p, size_t old_size,
					size_t new_size, gfp_t flags)
{
	void *ret;
	size_t copy_size = old_size;

	if (!new_size) {
		devm_kfree(dev, p);
		return ZERO_SIZE_PTR;
	}

	if (new_size < old_size)
		copy_size = new_size;

	ret = devm_kzalloc(dev, new_size, flags);
	if (!ret) {
		MSM_BUS_ERR("%s: Error Reallocating memory", __func__);
		goto exit_realloc_devmem;
	}

	memcpy(ret, p, copy_size);
	devm_kfree(dev, p);
exit_realloc_devmem:
	return ret;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:25，代码来源:msm_bus_fabric_adhoc.c

示例19: add_dirty_node

static int add_dirty_node(int **dirty_nodes, int id, int *num_dirty)
{
	int i;
	int found = 0;
	int ret = 0;
	int *dnode = NULL;

	for (i = 0; i < *num_dirty; i++) {
		if ((*dirty_nodes)[i] == id) {
			found = 1;
			break;
		}
	}

	if (!found) {
		(*num_dirty)++;
		dnode =
			krealloc(*dirty_nodes, sizeof(int) * (*num_dirty),
								GFP_KERNEL);

		if (ZERO_OR_NULL_PTR(dnode)) {
			MSM_BUS_ERR("%s: Failure allocating dirty nodes array",
								 __func__);
			ret = -ENOMEM;
		} else {
			*dirty_nodes = dnode;
			(*dirty_nodes)[(*num_dirty) - 1] = id;
		}
	}

	return ret;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:32，代码来源:msm_bus_fabric_adhoc.c

示例20: msm_bus_enable_limiter

int msm_bus_enable_limiter(struct msm_bus_node_device_type *node_dev,
				bool enable, uint64_t lim_bw)
{
	int ret = 0;
	struct msm_bus_node_device_type *bus_node_dev;

	if (!node_dev) {
		MSM_BUS_ERR("No device specified");
		ret = -ENXIO;
		goto exit_enable_limiter;
	}

	if (!node_dev->ap_owned) {
		MSM_BUS_ERR("Device is not AP owned %d.",
						node_dev->node_info->id);
		ret = -ENXIO;
		goto exit_enable_limiter;
	}

	bus_node_dev = node_dev->node_info->bus_device->platform_data;
	if (!bus_node_dev) {
		MSM_BUS_ERR("Unable to get bus device infofor %d",
			node_dev->node_info->id);
		ret = -ENXIO;
		goto exit_enable_limiter;
	}
	if (bus_node_dev->fabdev &&
		bus_node_dev->fabdev->noc_ops.limit_mport) {
		ret = msm_bus_qos_enable_clk(node_dev);
		if (ret < 0) {
			MSM_BUS_ERR("Can't Enable QoS clk %d",
				node_dev->node_info->id);
			goto exit_enable_limiter;
		}
		bus_node_dev->fabdev->noc_ops.limit_mport(
				node_dev,
				bus_node_dev->fabdev->qos_base,
				bus_node_dev->fabdev->base_offset,
				bus_node_dev->fabdev->qos_off,
				bus_node_dev->fabdev->qos_freq,
				enable, lim_bw);
		msm_bus_qos_disable_clk(node_dev, ret);
	}

exit_enable_limiter:
	return ret;
}

开发者ID:NamelessRom，项目名称:android_kernel_oppo_r7，代码行数:47，代码来源:msm_bus_fabric_adhoc.c

注：本文中的MSM_BUS_ERR函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MSM_FB_INFO函数代码示例发布时间：2022-05-30

C++ MSM_BUS_DBG函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18215|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9658|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8168|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8420|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8405|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ MSM_BUS_ERR函数代码示例

示例1: msm_bus_agg_fab_clks

示例2: msm_bus_dev_init_qos

示例3: flush_clk_data

示例4: msm_bus_commit_data

示例5: get_vfe_bw

示例6: setup_nr_limits

示例7: msm_bus_init_clk

示例8: send_rpm_msg

示例9: msm_bus_update_clks

示例10: msm_bus_qos_enable_clk

示例11: reset_pnodes

示例12: msm_bus_fabric_init

示例13: msm_bus_device_init_driver

示例14: msm_bus_rpm_commit_arb

示例15: msm_bus_setup_dev_conn

示例16: msm_bus_rpm_is_mem_interleaved

示例17: msm_bus_node_debug

示例18: devm_kfree

示例19: add_dirty_node

示例20: msm_bus_enable_limiter

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

TUNER88/iOSSystemSoundsLibrary: List of

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053