• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ MYF函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中MYF函数的典型用法代码示例。如果您正苦于以下问题:C++ MYF函数的具体用法?C++ MYF怎么用?C++ MYF使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了MYF函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: my_fwrite

size_t my_fwrite(FILE *stream, const uchar *Buffer, size_t Count, myf MyFlags)
{
  size_t writtenbytes =0;
  my_off_t seekptr;
#if !defined(NO_BACKGROUND) && defined(USE_MY_STREAM)
  uint errors;
#endif
  DBUG_ENTER("my_fwrite");
  DBUG_PRINT("my",("stream: 0x%lx  Buffer: 0x%lx  Count: %u  MyFlags: %d",
		   (long) stream, (long) Buffer, (uint) Count, MyFlags));

#if !defined(NO_BACKGROUND) && defined(USE_MY_STREAM)
  errors=0;
#endif
  seekptr= ftell(stream);
  for (;;)
  {
    size_t written;
    if ((written = (size_t) fwrite((char*) Buffer,sizeof(char),
                                   Count, stream)) != Count)
    {
      DBUG_PRINT("error",("Write only %d bytes", (int) writtenbytes));
      my_errno=errno;
      if (written != (size_t) -1)
      {
	seekptr+=written;
	Buffer+=written;
	writtenbytes+=written;
	Count-=written;
      }
#ifdef EINTR
      if (errno == EINTR)
      {
	(void) my_fseek(stream,seekptr,MY_SEEK_SET,MYF(0));
	continue;
      }
#endif
#if !defined(NO_BACKGROUND) && defined(USE_MY_STREAM)
      if (my_thread_var->abort)
	MyFlags&= ~ MY_WAIT_IF_FULL;		/* End if aborted by user */

      if ((errno == ENOSPC || errno == EDQUOT) &&
          (MyFlags & MY_WAIT_IF_FULL))
      {
        wait_for_free_space("[stream]", errors);
        errors++;
        (void) my_fseek(stream,seekptr,MY_SEEK_SET,MYF(0));
        continue;
      }
#endif
      if (ferror(stream) || (MyFlags & (MY_NABP | MY_FNABP)))
      {
	if (MyFlags & (MY_WME | MY_FAE | MY_FNABP))
	{
	  my_error(EE_WRITE, MYF(ME_BELL+ME_WAITTANG),
		   my_filename(my_fileno(stream)),errno);
	}
	writtenbytes= (size_t) -1;        /* Return that we got error */
	break;
      }
    }
    if (MyFlags & (MY_NABP | MY_FNABP))
      writtenbytes= 0;				/* Everything OK */
    else
      writtenbytes+= written;
    break;
  }
  DBUG_RETURN(writtenbytes);
} /* my_fwrite */
开发者ID:0omega,项目名称:TrinityCore,代码行数:69,代码来源:my_fstream.c


示例2: DBUG_ENTER

MY_DIR	*my_dir(const char *path, myf MyFlags)
{
  char          *buffer;
  MY_DIR        *result= 0;
  FILEINFO      finfo;
  DYNAMIC_ARRAY *dir_entries_storage;
  MEM_ROOT      *names_storage;
  DIR		*dirp;
  struct dirent *dp;
  char		tmp_path[FN_REFLEN + 2], *tmp_file;
  char	dirent_tmp[sizeof(struct dirent)+_POSIX_PATH_MAX+1];

  DBUG_ENTER("my_dir");
  DBUG_PRINT("my",("path: '%s' MyFlags: %d",path,MyFlags));

#if !defined(HAVE_READDIR_R)
  mysql_mutex_lock(&THR_LOCK_open);
#endif

  dirp = opendir(directory_file_name(tmp_path,(char *) path));
#if defined(__amiga__)
  if ((dirp->dd_fd) < 0)			/* Directory doesn't exists */
    goto error;
#endif
  if (dirp == NULL || 
      ! (buffer= my_malloc(ALIGN_SIZE(sizeof(MY_DIR)) + 
                           ALIGN_SIZE(sizeof(DYNAMIC_ARRAY)) +
                           sizeof(MEM_ROOT), MyFlags)))
    goto error;

  dir_entries_storage= (DYNAMIC_ARRAY*)(buffer + ALIGN_SIZE(sizeof(MY_DIR))); 
  names_storage= (MEM_ROOT*)(buffer + ALIGN_SIZE(sizeof(MY_DIR)) +
                             ALIGN_SIZE(sizeof(DYNAMIC_ARRAY)));
  
  if (my_init_dynamic_array(dir_entries_storage, sizeof(FILEINFO),
                            ENTRIES_START_SIZE, ENTRIES_INCREMENT))
  {
    my_free(buffer);
    goto error;
  }
  init_alloc_root(names_storage, NAMES_START_SIZE, NAMES_START_SIZE);
  
  /* MY_DIR structure is allocated and completly initialized at this point */
  result= (MY_DIR*)buffer;

  tmp_file=strend(tmp_path);

  dp= (struct dirent*) dirent_tmp;
  
  while (!(READDIR(dirp,(struct dirent*) dirent_tmp,dp)))
  {
    if (!(finfo.name= strdup_root(names_storage, dp->d_name)))
      goto error;
    
    if (MyFlags & MY_WANT_STAT)
    {
      if (!(finfo.mystat= (MY_STAT*)alloc_root(names_storage, 
                                               sizeof(MY_STAT))))
        goto error;
      
      memset(finfo.mystat, 0, sizeof(MY_STAT));
      (void) strmov(tmp_file,dp->d_name);
      (void) my_stat(tmp_path, finfo.mystat, MyFlags);
      if (!(finfo.mystat->st_mode & MY_S_IREAD))
        continue;
    }
    else
      finfo.mystat= NULL;

    if (push_dynamic(dir_entries_storage, (uchar*)&finfo))
      goto error;
  }

  (void) closedir(dirp);
#if !defined(HAVE_READDIR_R)
  mysql_mutex_unlock(&THR_LOCK_open);
#endif
  result->dir_entry= (FILEINFO *)dir_entries_storage->buffer;
  result->number_off_files= dir_entries_storage->elements;
  
  if (!(MyFlags & MY_DONT_SORT))
    my_qsort((void *) result->dir_entry, result->number_off_files,
          sizeof(FILEINFO), (qsort_cmp) comp_names);
  DBUG_RETURN(result);

 error:
#if !defined(HAVE_READDIR_R)
  mysql_mutex_unlock(&THR_LOCK_open);
#endif
  my_errno=errno;
  if (dirp)
    (void) closedir(dirp);
  my_dirend(result);
  if (MyFlags & (MY_FAE | MY_WME))
  {
    char errbuf[MYSYS_STRERROR_SIZE];
    my_error(EE_DIR, MYF(ME_BELL+ME_WAITTANG), path,
             my_errno, my_strerror(errbuf, sizeof(errbuf), my_errno));
  }
  DBUG_RETURN((MY_DIR *) NULL);
//.........这里部分代码省略.........
开发者ID:oscar810429,项目名称:AliSQL,代码行数:101,代码来源:my_lib.c


示例3: mrn_add_index_param

int mrn_add_index_param(MRN_SHARE *share, KEY *key_info, int i)
{
  int error;
  char *param_string = NULL;
#if MYSQL_VERSION_ID >= 50500
  int title_length;
  char *sprit_ptr[2];
  char *tmp_ptr, *start_ptr;
#endif
  THD *thd = current_thd;
  MRN_DBUG_ENTER_FUNCTION();

#if MYSQL_VERSION_ID >= 50500
  if (key_info->comment.length == 0)
  {
    if (share->key_tokenizer[i]) {
      my_free(share->key_tokenizer[i]);
    }
    share->key_tokenizer[i] = mrn_my_strdup(mrn_default_tokenizer, MYF(MY_WME));
    if (!share->key_tokenizer[i]) {
      error = HA_ERR_OUT_OF_MEM;
      goto error;
    }
    share->key_tokenizer_length[i] = strlen(share->key_tokenizer[i]);

    DBUG_RETURN(0);
  }
  DBUG_PRINT("info", ("mroonga create comment string"));
  if (
    !(param_string = mrn_my_strndup(key_info->comment.str,
                                    key_info->comment.length,
                                    MYF(MY_WME)))
  ) {
    error = HA_ERR_OUT_OF_MEM;
    goto error_alloc_param_string;
  }
  DBUG_PRINT("info", ("mroonga comment string=%s", param_string));

  sprit_ptr[0] = param_string;
  while (sprit_ptr[0])
  {
    if ((sprit_ptr[1] = strchr(sprit_ptr[0], ',')))
    {
      *sprit_ptr[1] = '\0';
      sprit_ptr[1]++;
    }
    tmp_ptr = sprit_ptr[0];
    sprit_ptr[0] = sprit_ptr[1];
    while (*tmp_ptr == ' ' || *tmp_ptr == '\r' ||
      *tmp_ptr == '\n' || *tmp_ptr == '\t')
      tmp_ptr++;

    if (*tmp_ptr == '\0')
      continue;

    title_length = 0;
    start_ptr = tmp_ptr;
    while (*start_ptr != ' ' && *start_ptr != '\'' &&
      *start_ptr != '"' && *start_ptr != '\0' &&
      *start_ptr != '\r' && *start_ptr != '\n' &&
      *start_ptr != '\t')
    {
      title_length++;
      start_ptr++;
    }

    switch (title_length)
    {
      case 5:
        MRN_PARAM_STR_LIST("table", index_table, i);
        break;
      case 6:
        push_warning_printf(thd, MRN_SEVERITY_WARNING,
                            ER_WARN_DEPRECATED_SYNTAX,
                            ER(ER_WARN_DEPRECATED_SYNTAX),
                            "parser", "tokenizer");
        MRN_PARAM_STR_LIST("parser", key_tokenizer, i);
        break;
      case 9:
        MRN_PARAM_STR_LIST("tokenizer", key_tokenizer, i);
        break;
      default:
        break;
    }
  }
#endif
  if (!share->key_tokenizer[i]) {
    share->key_tokenizer[i] = mrn_my_strdup(mrn_default_tokenizer, MYF(MY_WME));
    if (!share->key_tokenizer[i]) {
      error = HA_ERR_OUT_OF_MEM;
      goto error;
    }
    share->key_tokenizer_length[i] = strlen(share->key_tokenizer[i]);
  }

  if (param_string)
    my_free(param_string);
  DBUG_RETURN(0);

error:
//.........这里部分代码省略.........
开发者ID:myhhx,项目名称:mroonga,代码行数:101,代码来源:mrn_table.cpp


示例4: new_VioSSLAcceptorFd

/*
  TODO:
       Add option --verify to mysqld to be able to change verification mode
*/
struct st_VioSSLAcceptorFd*
new_VioSSLAcceptorFd(const char *key_file,
		     const char *cert_file,
		     const char *ca_file,
		     const char *ca_path,
		     const char *cipher)
{
  int verify = (SSL_VERIFY_PEER			|
		SSL_VERIFY_CLIENT_ONCE);
  struct st_VioSSLAcceptorFd* ptr;
  int result;
  DH *dh=NULL; 
  DBUG_ENTER("new_VioSSLAcceptorFd");
  DBUG_PRINT("enter",
	     ("key_file=%s, cert_file=%s, ca_path=%s, ca_file=%s, cipher=%s",
	      key_file, cert_file, ca_path, ca_file, cipher));

  ptr= ((struct st_VioSSLAcceptorFd*)
	my_malloc(sizeof(struct st_VioSSLAcceptorFd),MYF(0)));
  ptr->ssl_context=0;
  ptr->ssl_method=0;
  /* FIXME: constants! */
  ptr->session_id_context= ptr;

  if (!ssl_algorithms_added)
  {
    DBUG_PRINT("info", ("todo: OpenSSL_add_all_algorithms()"));
    ssl_algorithms_added = TRUE;
    OpenSSL_add_all_algorithms();

  }
  if (!ssl_error_strings_loaded)
  {
    DBUG_PRINT("info", ("todo: SSL_load_error_strings()"));
    ssl_error_strings_loaded = TRUE;
    SSL_load_error_strings();
  }
  ptr->ssl_method=  TLSv1_server_method();
  ptr->ssl_context= SSL_CTX_new(ptr->ssl_method);
  if (ptr->ssl_context == 0)
  {
    DBUG_PRINT("error", ("SSL_CTX_new failed"));
    report_errors();
    goto ctor_failure;
  }
  if (cipher)
  {
    result=SSL_CTX_set_cipher_list(ptr->ssl_context, cipher);
    DBUG_PRINT("info",("SSL_set_cipher_list() returned %d",result));
  }
  /* SSL_CTX_set_quiet_shutdown(ctx,1); */
  SSL_CTX_sess_set_cache_size(ptr->ssl_context,128);

  /* DH? */
  SSL_CTX_set_verify(ptr->ssl_context, verify, vio_verify_callback);
  SSL_CTX_set_session_id_context(ptr->ssl_context,
				 (const uchar*) &(ptr->session_id_context),
				 sizeof(ptr->session_id_context));

  /*
    SSL_CTX_set_client_CA_list(ctx,SSL_load_client_CA_file(CAfile));
  */
  if (vio_set_cert_stuff(ptr->ssl_context, cert_file, key_file) == -1)
  {
    DBUG_PRINT("error", ("vio_set_cert_stuff failed"));
    report_errors();
    goto ctor_failure;
  }
  if (SSL_CTX_load_verify_locations( ptr->ssl_context, ca_file, ca_path) == 0)
  {
    DBUG_PRINT("warning", ("SSL_CTX_load_verify_locations failed"));
    if (SSL_CTX_set_default_verify_paths(ptr->ssl_context)==0)
    {
      DBUG_PRINT("error", ("SSL_CTX_set_default_verify_paths failed"));
      report_errors();
      goto ctor_failure;
    }
  }
  /* DH stuff */
  dh=get_dh512();
  SSL_CTX_set_tmp_dh(ptr->ssl_context,dh);
  DH_free(dh);
  DBUG_RETURN(ptr);

ctor_failure:
  DBUG_PRINT("exit", ("there was an error"));
  my_free((gptr) ptr,MYF(0));
  DBUG_RETURN(0);
}
开发者ID:OPSF,项目名称:uClinux,代码行数:93,代码来源:viosslfactories.c


示例5: cache_remove_open_tmp

#include "my_static.h"
#include "mysys_err.h"

	/*
	  Remove an open tempfile so that it doesn't survive
	  if we crash;	If the operating system doesn't support
	  this, just remember the file name for later removal
	*/

static my_bool cache_remove_open_tmp(IO_CACHE *cache __attribute__((unused)),
				     const char *name)
{
#if O_TEMPORARY == 0
#if !defined(CANT_DELETE_OPEN_FILES)
  /* The following should always succeed */
  (void) my_delete(name,MYF(MY_WME | ME_NOINPUT));
#else
  int length;
  if (!(cache->file_name=
	(char*) my_malloc((length=strlen(name)+1),MYF(MY_WME))))
  {
    my_close(cache->file,MYF(0));
    cache->file = -1;
    errno=my_errno=ENOMEM;
    return 1;
  }
  memcpy(cache->file_name,name,length);
#endif
#endif /* O_TEMPORARY == 0 */
  return 0;
}
开发者ID:freyes,项目名称:percona-xtradb-cluster-5.5,代码行数:31,代码来源:mf_cache.c


示例6: _mi_read_cache

int _mi_read_cache(IO_CACHE *info, uchar *buff, my_off_t pos, uint length,
		   int flag)
{
  uint read_length,in_buff_length;
  my_off_t offset;
  uchar *in_buff_pos;
  DBUG_ENTER("_mi_read_cache");
  DBUG_ASSERT(!(info->myflags & MY_ENCRYPT));

  if (pos < info->pos_in_file)
  {
    read_length=length;
    if ((my_off_t) read_length > (my_off_t) (info->pos_in_file-pos))
      read_length=(uint) (info->pos_in_file-pos);
    info->seek_not_done=1;
    if (mysql_file_pread(info->file, buff, read_length, pos, MYF(MY_NABP)))
      DBUG_RETURN(1);
    if (!(length-=read_length))
      DBUG_RETURN(0);
    pos+=read_length;
    buff+=read_length;
  }
  if (pos >= info->pos_in_file &&
      (offset= (my_off_t) (pos - info->pos_in_file)) <
      (my_off_t) (info->read_end - info->request_pos))
  {
    in_buff_pos=info->request_pos+(uint) offset;
    in_buff_length= MY_MIN(length, (size_t) (info->read_end-in_buff_pos));
    memcpy(buff,info->request_pos+(uint) offset,(size_t) in_buff_length);
    if (!(length-=in_buff_length))
      DBUG_RETURN(0);
    pos+=in_buff_length;
    buff+=in_buff_length;
  }
  else
    in_buff_length=0;
  if (flag & READING_NEXT)
  {
    if (pos != (info->pos_in_file +
		(uint) (info->read_end - info->request_pos)))
    {
      info->pos_in_file=pos;				/* Force start here */
      info->read_pos=info->read_end=info->request_pos;	/* Everything used */
      info->seek_not_done=1;
    }
    else
      info->read_pos=info->read_end;			/* All block used */
    if (!_my_b_read(info,buff,length))
      DBUG_RETURN(0);
    read_length=info->error;
  }
  else
  {
    info->seek_not_done=1;
    if ((read_length= mysql_file_pread(info->file, buff, length, pos,
                                       MYF(0))) == length)
      DBUG_RETURN(0);
  }
  if (!(flag & READING_HEADER) || (int) read_length == -1 ||
      read_length+in_buff_length < 3)
  {
    DBUG_PRINT("error",
               ("Error %d reading next-multi-part block (Got %d bytes)",
                my_errno, (int) read_length));
    if (!my_errno || my_errno == -1 || my_errno == HA_ERR_FILE_TOO_SHORT)
      my_errno= HA_ERR_WRONG_IN_RECORD;
    DBUG_RETURN(1);
  }
  bzero(buff+read_length,MI_BLOCK_INFO_HEADER_LENGTH - in_buff_length -
        read_length);
  DBUG_RETURN(0);
} /* _mi_read_cache */
开发者ID:Belxjander,项目名称:Asuna,代码行数:72,代码来源:mi_cache.c


示例7: mroonga_normalize_init

MRN_API my_bool mroonga_normalize_init(UDF_INIT *initid, UDF_ARGS *args,
                                       char *message)
{
  st_mrn_normalize_info *info = NULL;
  String *result_str = NULL;

  initid->ptr = NULL;
  if (!(1 <= args->arg_count && args->arg_count <= 2)) {
    sprintf(message,
            "mroonga_normalize(): Incorrect number of arguments: %u for 1..2",
            args->arg_count);
    goto error;
  }
  if (args->arg_type[0] != STRING_RESULT) {
    strcpy(message,
           "mroonga_normalize(): The 1st argument must be query as string");
    goto error;
  }
  if (args->arg_count == 2) {
    if (args->arg_type[1] != STRING_RESULT) {
      strcpy(message,
             "mroonga_normalize(): "
             "The 2st argument must be normalizer name as string");
      goto error;
    }
  }

  initid->maybe_null = 1;
  initid->const_item = 0;

  info = (st_mrn_normalize_info *)mrn_my_malloc(sizeof(st_mrn_normalize_info),
                                                MYF(MY_WME | MY_ZEROFILL));
  if (!info) {
    strcpy(message, "mroonga_normalize(): out of memory");
    goto error;
  }

  info->ctx = mrn_context_pool->pull();
  {
    const char *current_db_path = MRN_THD_DB_PATH(current_thd);
    const char *action;
    if (current_db_path) {
      action = "open database";
      mrn::Database *db;
      int error = mrn_db_manager->open(current_db_path, &db);
      if (error == 0) {
        info->db = db->get();
        grn_ctx_use(info->ctx, info->db);
        info->use_shared_db = true;
      }
    } else {
      action = "create anonymous database";
      info->db = grn_db_create(info->ctx, NULL, NULL);
      info->use_shared_db = false;
    }
    if (!info->db) {
      sprintf(message,
              "mroonga_normalize(): failed to %s: %s",
              action,
              info->ctx->errbuf);
      goto error;
    }
  }

  if (args->arg_count == 1) {
    info->normalizer = grn_ctx_get(info->ctx, DEFAULT_NORMALIZER_NAME, -1);
  } else {
    info->normalizer = grn_ctx_get(info->ctx, args->args[1], args->lengths[1]);
  }
  if (!info->normalizer) {
    sprintf(message, "mroonga_normalize(): nonexistent normalizer %.*s",
            (int)args->lengths[1], args->args[1]);
    goto error;
  }
  info->flags = 0;

  result_str = &(info->result_str);
  mrn::encoding::set_raw(info->ctx, system_charset_info);
  result_str->set_charset(system_charset_info);

  initid->ptr = (char *)info;

  return FALSE;

error:
  if (info) {
    if (!info->use_shared_db) {
      grn_obj_close(info->ctx, info->db);
    }
    mrn_context_pool->release(info->ctx);
    my_free(info);
  }
  return TRUE;
}
开发者ID:skyformat99,项目名称:mroonga,代码行数:94,代码来源:mrn_udf_normalize.cpp


示例8: main

int
main(int argc, char **argv)
{
	gcry_error_t 		gcry_error;
	File filein = 0;
	File fileout = 0;

	MY_INIT(argv[0]);

	if (get_options(&argc, &argv)) {
		goto err;
	}

	/* Acording to gcrypt docs (and my testing), setting up the threading
	   callbacks must be done first, so, lets give it a shot */
	gcry_error = gcry_control(GCRYCTL_SET_THREAD_CBS, &gcry_threads_pthread);
	if (gcry_error) {
		msg("%s: unable to set libgcrypt thread cbs - "
		    "%s : %s\n", my_progname,
		    gcry_strsource(gcry_error),
		    gcry_strerror(gcry_error));
		return 1;
	}

	/* Version check should be the very first call because it
	makes sure that important subsystems are intialized. */
	if (!gcry_control(GCRYCTL_ANY_INITIALIZATION_P)) {
		const char	*gcrypt_version;
		gcrypt_version = gcry_check_version(NULL);
		/* No other library has already initialized libgcrypt. */
		if (!gcrypt_version) {
			msg("%s: failed to initialize libgcrypt\n",
			    my_progname);
			return 1;
		} else if (opt_verbose) {
			msg("%s: using gcrypt %s\n", my_progname,
			    gcrypt_version);
		}
	}
	gcry_control(GCRYCTL_DISABLE_SECMEM, 0);
	gcry_control(GCRYCTL_INITIALIZATION_FINISHED, 0);

	/* Determine the algorithm */
	encrypt_algo = encrypt_algos[opt_encrypt_algo];

	/* Set up the iv length */
	encrypt_iv_len = gcry_cipher_get_algo_blklen(encrypt_algo);

	/* Now set up the key */
	if (opt_encrypt_key == NULL && opt_encrypt_key_file == NULL) {
		msg("%s: no encryption key or key file specified.\n",
		    my_progname);
		return 1;
	} else if (opt_encrypt_key && opt_encrypt_key_file) {
		msg("%s: both encryption key and key file specified.\n",
		    my_progname);
		return 1;
	} else if (opt_encrypt_key_file) {
		if (!xb_crypt_read_key_file(opt_encrypt_key_file,
					    &opt_encrypt_key,
					    &encrypt_key_len)) {
			msg("%s: unable to read encryption key file \"%s\".\n",
			    opt_encrypt_key_file, my_progname);
			return 1;
		}
	} else {
		encrypt_key_len = strlen(opt_encrypt_key);
	}

	if (opt_input_file) {
		MY_STAT 	mystat;

		if (opt_verbose)
			msg("%s: input file \"%s\".\n", my_progname,
			    opt_input_file);

		if (my_stat(opt_input_file, &mystat, MYF(MY_WME)) == NULL) {
			goto err;
		}
		if (!MY_S_ISREG(mystat.st_mode)) {
			msg("%s: \"%s\" is not a regular file, exiting.\n",
			    my_progname, opt_input_file);
			goto err;
		}
		if ((filein = my_open(opt_input_file, O_RDONLY, MYF(MY_WME)))
		     < 0) {
			msg("%s: failed to open \"%s\".\n", my_progname,
			     opt_input_file);
			goto err;
		}
	} else {
		if (opt_verbose)
			msg("%s: input from standard input.\n", my_progname);
		filein = fileno(stdin);
	}

	if (opt_output_file) {
		if (opt_verbose)
			msg("%s: output file \"%s\".\n", my_progname,
			    opt_output_file);
//.........这里部分代码省略.........
开发者ID:IsCoolEntertainment,项目名称:debpkg_percona-xtrabackup,代码行数:101,代码来源:xbcrypt.c


示例9: mode_decrypt

static
int
mode_decrypt(File filein, File fileout)
{
	xb_rcrypt_t		*xbcrypt_file = NULL;
	void			*chunkbuf = NULL;
	size_t			chunksize;
	size_t			originalsize;
	void			*ivbuf = NULL;
	size_t			ivsize;
	void			*decryptbuf = NULL;
	size_t			decryptbufsize = 0;
	ulonglong		ttlchunksread = 0;
	ulonglong		ttlbytesread = 0;
	xb_rcrypt_result_t	result;
	gcry_cipher_hd_t	cipher_handle;
	gcry_error_t		gcry_error;

	if (encrypt_algo != GCRY_CIPHER_NONE) {
		gcry_error = gcry_cipher_open(&cipher_handle,
					      encrypt_algo,
					      encrypt_mode, 0);
		if (gcry_error) {
			msg("%s:decrypt: unable to open libgcrypt"
			    " cipher - %s : %s\n", my_progname,
			    gcry_strsource(gcry_error),
			    gcry_strerror(gcry_error));
			return 1;
		}

		gcry_error = gcry_cipher_setkey(cipher_handle,
						opt_encrypt_key,
						encrypt_key_len);
		if (gcry_error) {
			msg("%s:decrypt: unable to set libgcrypt cipher"
			    "key - %s : %s\n", my_progname,
			    gcry_strsource(gcry_error),
			    gcry_strerror(gcry_error));
			goto err;
		}
	}

	/* Initialize the xb_crypt format reader */
	xbcrypt_file = xb_crypt_read_open(&filein, my_xb_crypt_read_callback);
	if (xbcrypt_file == NULL) {
		msg("%s:decrypt: xb_crypt_read_open() failed.\n", my_progname);
		goto err;
	}

	/* Walk the encrypted chunks, decrypting them and writing out */
	while ((result = xb_crypt_read_chunk(xbcrypt_file, &chunkbuf,
					     &originalsize, &chunksize,
					     &ivbuf, &ivsize))
		== XB_CRYPT_READ_CHUNK) {

		if (encrypt_algo != GCRY_CIPHER_NONE) {
			gcry_error = gcry_cipher_reset(cipher_handle);
			if (gcry_error) {
				msg("%s:decrypt: unable to reset libgcrypt"
				    " cipher - %s : %s\n", my_progname,
				    gcry_strsource(gcry_error),
				    gcry_strerror(gcry_error));
				goto err;
			}

			if (ivsize) {
				gcry_error = gcry_cipher_setiv(cipher_handle,
							       ivbuf,
							       ivsize);
			} else {
				gcry_error = gcry_cipher_setiv(cipher_handle,
							       v1_encrypt_iv,
							       encrypt_iv_len);
			}
			if (gcry_error) {
				msg("%s:decrypt: unable to set cipher iv - "
				    "%s : %s\n", my_progname,
				    gcry_strsource(gcry_error),
				    gcry_strerror(gcry_error));
				continue;
			}

			if (decryptbufsize < originalsize) {
				if (decryptbufsize) {
					decryptbuf = my_realloc(decryptbuf,
								originalsize,
								MYF(MY_WME));
					decryptbufsize = originalsize;
				} else {
					decryptbuf = my_malloc(originalsize,
							       MYF(MY_WME));
					decryptbufsize = originalsize;
				}
			}

			/* Try to decrypt it */
			gcry_error = gcry_cipher_decrypt(cipher_handle,
							 decryptbuf,
							 originalsize,
							 chunkbuf,
//.........这里部分代码省略.........
开发者ID:IsCoolEntertainment,项目名称:debpkg_percona-xtrabackup,代码行数:101,代码来源:xbcrypt.c


示例10: reset_tree

void reset_tree(TREE* tree)
{
  /* do not free mem_root, just mark blocks as free */
  free_tree(tree, MYF(MY_MARK_BLOCKS_FREE));
}
开发者ID:0omega,项目名称:TrinityCore,代码行数:5,代码来源:tree.c


示例11: ELEMENT_KEY

TREE_ELEMENT *tree_insert(TREE *tree, void *key, uint key_size, 
                          void* custom_arg)
{
  int cmp;
  TREE_ELEMENT *element,***parent;

  parent= tree->parents;
  *parent = &tree->root; element= tree->root;
  for (;;)
  {
    if (element == &tree->null_element ||
	(cmp = (*tree->compare)(custom_arg, ELEMENT_KEY(tree,element),
                                key)) == 0)
      break;
    if (cmp < 0)
    {
      *++parent= &element->right; element= element->right;
    }
    else
    {
      *++parent = &element->left; element= element->left;
    }
  }
  if (element == &tree->null_element)
  {
    uint alloc_size=sizeof(TREE_ELEMENT)+key_size+tree->size_of_element;
    tree->allocated+=alloc_size;

    if (tree->memory_limit && tree->elements_in_tree
                           && tree->allocated > tree->memory_limit)
    {
      reset_tree(tree);
      return tree_insert(tree, key, key_size, custom_arg);
    }

    key_size+=tree->size_of_element;
    if (tree->with_delete)
      element=(TREE_ELEMENT *) my_malloc(alloc_size, MYF(MY_WME));
    else
      element=(TREE_ELEMENT *) alloc_root(&tree->mem_root,alloc_size);
    if (!element)
      return(NULL);
    **parent=element;
    element->left=element->right= &tree->null_element;
    if (!tree->offset_to_key)
    {
      if (key_size == sizeof(void*))		 /* no length, save pointer */
	*((void**) (element+1))=key;
      else
      {
	*((void**) (element+1))= (void*) ((void **) (element+1)+1);
	memcpy((uchar*) *((void **) (element+1)),key,
	       (size_t) (key_size-sizeof(void*)));
      }
    }
    else
      memcpy((uchar*) element+tree->offset_to_key,key,(size_t) key_size);
    element->count=1;			/* May give warning in purify */
    tree->elements_in_tree++;
    rb_insert(tree,parent,element);	/* rebalance tree */
  }
  else
  {
    if (tree->flag & TREE_NO_DUPS)
      return(NULL);
    element->count++;
    /* Avoid a wrap over of the count. */
    if (! element->count)
      element->count--;
  }
  DBUG_EXECUTE("check_tree", test_rb_tree(tree->root););
开发者ID:0omega,项目名称:TrinityCore,代码行数:71,代码来源:tree.c


示例12: delete_tree

void delete_tree(TREE* tree)
{
  free_tree(tree, MYF(0)); /* my_free() mem_root if applicable */
}
开发者ID:0omega,项目名称:TrinityCore,代码行数:4,代码来源:tree.c


示例13: my_copy

int my_copy(const char *from, const char *to, myf MyFlags)
{
  size_t Count;
  my_bool new_file_stat= 0; /* 1 if we could stat "to" */
  int create_flag;
  File from_file,to_file;
  uchar buff[IO_SIZE];
  MY_STAT stat_buff,new_stat_buff;
  DBUG_ENTER("my_copy");
  DBUG_PRINT("my",("from %s to %s MyFlags %d", from, to, MyFlags));

  from_file=to_file= -1;
  DBUG_ASSERT(!(MyFlags & (MY_FNABP | MY_NABP))); /* for my_read/my_write */
  if (MyFlags & MY_HOLD_ORIGINAL_MODES)		/* Copy stat if possible */
    new_file_stat= test(my_stat((char*) to, &new_stat_buff, MYF(0)));

  if ((from_file=my_open(from,O_RDONLY | O_SHARE,MyFlags)) >= 0)
  {
    if (!my_stat(from, &stat_buff, MyFlags))
    {
      my_errno=errno;
      goto err;
    }
    if (MyFlags & MY_HOLD_ORIGINAL_MODES && new_file_stat)
      stat_buff=new_stat_buff;
    create_flag= (MyFlags & MY_DONT_OVERWRITE_FILE) ? O_EXCL : O_TRUNC;

    if ((to_file=  my_create(to,(int) stat_buff.st_mode,
			     O_WRONLY | create_flag | O_BINARY | O_SHARE,
			     MyFlags)) < 0)
      goto err;

    while ((Count=my_read(from_file, buff, sizeof(buff), MyFlags)) != 0)
    {
	if (Count == (uint) -1 ||
	    my_write(to_file,buff,Count,MYF(MyFlags | MY_NABP)))
	goto err;
    }

    /* sync the destination file */
    if (MyFlags & MY_SYNC)
    {
      if (my_sync(to_file, MyFlags))
        goto err;
    }

    if (my_close(from_file,MyFlags) | my_close(to_file,MyFlags))
      DBUG_RETURN(-1);				/* Error on close */

    /* Copy modes if possible */

    if (MyFlags & MY_HOLD_ORIGINAL_MODES && !new_file_stat)
	DBUG_RETURN(0);			/* File copyed but not stat */
    /* Copy modes */
    if (chmod(to, stat_buff.st_mode & 07777))
    {
      my_errno= errno;
      if (MyFlags & (MY_FAE+MY_WME))
        my_error(EE_CHANGE_PERMISSIONS, MYF(ME_BELL+ME_WAITTANG), from, errno);
      goto err;
    }
#if !defined(__WIN__)
    /* Copy ownership */
    if (chown(to, stat_buff.st_uid, stat_buff.st_gid))
    {
      my_errno= errno;
      if (MyFlags & (MY_FAE+MY_WME))
        my_error(EE_CHANGE_OWNERSHIP, MYF(ME_BELL+ME_WAITTANG), from, errno);
      goto err;
    }
#endif

    if (MyFlags & MY_COPYTIME)
    {
      struct utimbuf timep;
      timep.actime  = stat_buff.st_atime;
      timep.modtime = stat_buff.st_mtime;
      (void) utime((char*) to, &timep); /* last accessed and modified times */
    }

    DBUG_RETURN(0);
  }

err:
  if (from_file >= 0) (void) my_close(from_file,MyFlags);
  if (to_file >= 0)
  {
    (void) my_close(to_file, MyFlags);
    /* attempt to delete the to-file we've partially written */
    (void) my_delete(to, MyFlags);
  }
  DBUG_RETURN(-1);
} /* my_copy */
开发者ID:55887MX,项目名称:CCORE,代码行数:93,代码来源:my_copy.c


示例14: create_temp_file

File create_temp_file(char *to, const char *dir, const char *prefix,
                      int mode, myf MyFlags)
{
    File file= -1;
#ifdef _WIN32
    TCHAR path_buf[MAX_PATH-14];
#endif

    DBUG_ENTER("create_temp_file");
    DBUG_PRINT("enter", ("dir: %s, prefix: %s", dir, prefix));
#if defined(_WIN32)

    /*
      Use GetTempPath to determine path for temporary files.
      This is because the documentation for GetTempFileName
      has the following to say about this parameter:
      "If this parameter is NULL, the function fails."
    */
    if (!dir)
    {
        if(GetTempPath(sizeof(path_buf), path_buf) > 0)
            dir = path_buf;
    }
    /*
      Use GetTempFileName to generate a unique filename, create
      the file and release it's handle
       - uses up to the first three letters from prefix
    */
    if (GetTempFileName(dir, prefix, 0, to) == 0)
        DBUG_RETURN(-1);

    DBUG_PRINT("info", ("name: %s", to));

    /*
      Open the file without the "open only if file doesn't already exist"
      since the file has already been created by GetTempFileName
    */
    if ((file= my_open(to,  (mode & ~O_EXCL), MyFlags)) < 0)
    {
        /* Open failed, remove the file created by GetTempFileName */
        int tmp= my_errno();
        (void) my_delete(to, MYF(0));
        set_my_errno(tmp);
    }

#else /* mkstemp() is available on all non-Windows supported platforms. */
    {
        char prefix_buff[30];
        uint pfx_len;
        File org_file;

        pfx_len= (uint) (my_stpcpy(my_stpnmov(prefix_buff,
                                              prefix ? prefix : "tmp.",
                                              sizeof(prefix_buff)-7),"XXXXXX") -
                         prefix_buff);
        if (!dir && ! (dir =getenv("TMPDIR")))
            dir= DEFAULT_TMPDIR;
        if (strlen(dir)+ pfx_len > FN_REFLEN-2)
        {
            errno=ENAMETOOLONG;
            set_my_errno(ENAMETOOLONG);
            DBUG_RETURN(file);
        }
        my_stpcpy(convert_dirname(to,dir,NullS),prefix_buff);
        org_file=mkstemp(to);
        if (mode & O_TEMPORARY)
            (void) my_delete(to, MYF(MY_WME));
        file=my_register_filename(org_file, to, FILE_BY_MKSTEMP,
                                  EE_CANTCREATEFILE, MyFlags);
        /* If we didn't manage to register the name, remove the temp file */
        if (org_file >= 0 && file < 0)
        {
            int tmp=my_errno();
            close(org_file);
            (void) my_delete(to, MYF(MY_WME));
            set_my_errno(tmp);
        }
    }
#endif
    if (file >= 0)
    {
        mysql_mutex_lock(&THR_LOCK_open);
        my_tmp_file_created++;
        mysql_mutex_unlock(&THR_LOCK_open);
    }
    DBUG_RETURN(file);
}
开发者ID:carrotli,项目名称:ansql,代码行数:87,代码来源:mf_tempfile.c


示例15: UNINIT_VAR

MYRG_INFO *myrg_open(const char *name, int mode, int handle_locking)
{
  int save_errno,errpos=0;
  uint files= 0, i, dir_length, length, UNINIT_VAR(key_parts), min_keys= 0;
  ulonglong file_offset=0;
  char name_buff[FN_REFLEN*2],buff[FN_REFLEN],*end;
  MYRG_INFO *m_info=0;
  File fd;
  IO_CACHE file;
  MI_INFO *isam=0;
  uint found_merge_insert_method= 0;
  size_t name_buff_length;
  my_bool bad_children= FALSE;
  DBUG_ENTER("myrg_open");

  bzero((char*) &file,sizeof(file));
  if ((fd= mysql_file_open(rg_key_file_MRG,
                           fn_format(name_buff, name, "", MYRG_NAME_EXT,
                                     MY_UNPACK_FILENAME|MY_APPEND_EXT),
                           O_RDONLY | O_SHARE, MYF(0))) < 0)
    goto err;
  errpos=1;
  if (init_io_cache(&file, fd, 4*IO_SIZE, READ_CACHE, 0, 0,
		    MYF(MY_WME | MY_NABP)))
    goto err;
  errpos=2;
  dir_length=dirname_part(name_buff, name, &name_buff_length);
  while ((length=my_b_gets(&file,buff,FN_REFLEN-1)))
  {
    if ((end=buff+length)[-1] == '\n')
      end[-1]='\0';
    if (buff[0] && buff[0] != '#')
      files++;
  }

  my_b_seek(&file, 0);
  while ((length=my_b_gets(&file,buff,FN_REFLEN-1)))
  {
    if ((end=buff+length)[-1] == '\n')
      *--end='\0';
    if (!buff[0])
      continue;		/* Skip empty lines */
    if (buff[0] == '#')
    {
      if (!strncmp(buff+1,"INSERT_METHOD=",14))
      {			/* Lookup insert method */
	int tmp= find_type(buff + 15, &merge_insert_method, FIND_TYPE_BASIC);
	found_merge_insert_method = (uint) (tmp >= 0 ? tmp : 0);
      }
      continue;		/* Skip comments */
    }

    if (!has_path(buff))
    {
      (void) strmake(name_buff+dir_length,buff,
                   sizeof(name_buff)-1-dir_length);
      (void) cleanup_dirname(buff,name_buff);
    }
    else
      fn_format(buff, buff, "", "", 0);
    if (!(isam=mi_open(buff,mode,(handle_locking?HA_OPEN_WAIT_IF_LOCKED:0))))
    {
      if (handle_locking & HA_OPEN_FOR_REPAIR)
      {
        myrg_print_wrong_table(buff);
        bad_children= TRUE;
        continue;
      }
      goto bad_children;
    }
    if (!m_info)                                /* First file */
    {
      key_parts=isam->s->base.key_parts;
      if (!(m_info= (MYRG_INFO*) my_malloc(sizeof(MYRG_INFO) +
                                           files*sizeof(MYRG_TABLE) +
                                           key_parts*sizeof(long),
                                           MYF(MY_WME|MY_ZEROFILL))))
        goto err;
      DBUG_ASSERT(files);
      m_info->open_tables=(MYRG_TABLE *) (m_info+1);
      m_info->rec_per_key_part=(ulong *) (m_info->open_tables+files);
      m_info->tables= files;
      files= 0;
      m_info->reclength=isam->s->base.reclength;
      min_keys= isam->s->base.keys;
      errpos=3;
    }
    m_info->open_tables[files].table= isam;
    m_info->open_tables[files].file_offset=(my_off_t) file_offset;
    file_offset+=isam->state->data_file_length;
    files++;
    if (m_info->reclength != isam->s->base.reclength)
    {
      if (handle_locking & HA_OPEN_FOR_REPAIR)
      {
        myrg_print_wrong_table(buff);
        bad_children= TRUE;
        continue;
      }
      goto bad_children;
//.........这里部分代码省略.........
开发者ID:A-eolus,项目名称:mysql,代码行数:101,代码来源:myrg_open.c


示例16: mode_encrypt

static
int
mode_encrypt(File filein, File fileout)
{
	size_t			bytesread;
	size_t			chunkbuflen;
	void			*chunkbuf = NULL;
	void			*ivbuf = NULL;
	size_t			encryptbuflen = 0;
	size_t			encryptedlen = 0;
	void			*encryptbuf = NULL;
	ulonglong		ttlchunkswritten = 0;
	ulonglong		ttlbyteswritten = 0;
	xb_wcrypt_t		*xbcrypt_file = NULL;
	gcry_cipher_hd_t	cipher_handle;
	gcry_error_t		gcry_error;

	if (encrypt_algo != GCRY_CIPHER_NONE) {
		gcry_error = gcry_cipher_open(&cipher_handle,
					      encrypt_algo,
					      encrypt_mode, 0);
		if (gcry_error) {
			msg("%s:encrypt: unable to open libgcrypt cipher - "
			    "%s : %s\n", my_progname,
			    gcry_strsource(gcry_error),
			    gcry_strerror(gcry_error));
			return 1;
		}

		gcry_error = gcry_cipher_setkey(cipher_handle,
						opt_encrypt_key,
						encrypt_key_len);
		if (gcry_error) {
			msg("%s:encrypt: unable to set libgcrypt cipher key - "
			    "%s : %s\n", my_progname,
			    gcry_strsource(gcry_error),
			    gcry_strerror(gcry_error));
			goto err;
		}
	}

	posix_fadvise(filein, 0, 0, POSIX_FADV_SEQUENTIAL);

	xbcrypt_file = xb_crypt_write_open(&fileout,
					   my_xb_crypt_write_callback);
	if (xbcrypt_file == NULL) {
		msg("%s:encrypt: xb_crypt_write_open() failed.\n",
		    my_progname);
		goto err;
	}

	ivbuf = my_malloc(encrypt_iv_len, MYF(MY_FAE));

	/* now read in data in chunk size, encrypt and write out */
	chunkbuflen = opt_encrypt_chunk_size;
	chunkbuf = my_malloc(chunkbuflen, MYF(MY_FAE));
	while ((bytesread = my_read(filein, chunkbuf, chunkbuflen,
				    MYF(MY_WME))) > 0) {

		if (encrypt_algo != GCRY_CIPHER_NONE) {
			gcry_error = gcry_cipher_reset(cipher_handle);

			if (gcry_error) {
				msg("%s:encrypt: unable to reset cipher - "
				    "%s : %s\n", my_progname,
				    gcry_strsource(gcry_error),
				    gcry_strerror(gcry_error));
				goto err;
			}

			xb_crypt_create_iv(ivbuf, encrypt_iv_len);
			gcry_error = gcry_cipher_setiv(cipher_handle,
							ivbuf,
							encrypt_iv_len);

			if (gcry_error) {
				msg("%s:encrypt: unable to set cipher iv - "
				    "%s : %s\n", my_progname,
				    gcry_strsource(gcry_error),
				    gcry_strerror(gcry_error));
				continue;
			}

			if (encryptbuflen < bytesread) {
				if (encryptbuflen) {
					encryptbuf = my_realloc(encryptbuf,
								bytesread,
								MYF(MY_WME));
					encryptbuflen = bytesread;
				} else {
					encryptbuf = my_malloc(bytesread,
							       MYF(MY_WME));
					encryptbuflen = bytesread;
				}
			}

			gcry_error = gcry_cipher_encrypt(cipher_handle,
							 encryptbuf,
							 encryptbuflen,
							 chunkbuf,
//.........这里部分代码省略.........
开发者ID:IsCoolEntertainment,项目名称:debpkg_percona-xtrabackup,代码行数:101,代码来源:xbcrypt.c


示例17: myrg_attach_children

int myrg_attach_children(MYRG_INFO *m_info, int handle_locking,
                         MI_INFO *(*callback)(void*),
                         void *callback_param, my_bool *need_compat_check)
{
  ulonglong  file_offset;
  MI_INFO    *myisam;
  int        errpos;
  int        save_errno;
  uint       idx;
  uint       child_nr;
  uint       UNINIT_VAR(key_parts);
  uint       min_keys;
  my_bool    bad_children= FALSE;
  my_bool    first_child= TRUE;
  DBUG_ENTER("myrg_attach_children");
  DBUG_PRINT("myrg", ("handle_locking: %d", handle_locking));

  /*
    This function can be called while another thread is trying to abort
    locks of this MERGE table. If the processor reorders instructions or
    write to memory, 'children_attached' could be set before
    'open_tables' has all the pointers to the children. Use of a mutex
    here and in ha_myisammrg::store_lock() forces consistent data.
  */
  mysql_mutex_lock(&m_info->mutex);
  errpos= 0;
  file_offset= 0;
  min_keys= 0;
  for (child_nr= 0; child_nr < m_info->tables; child_nr++)
  {
    if (! (myisam= (*callback)(callback_param)))
    {
      if (handle_locking & HA_OPEN_FOR_REPAIR)
      {
        /* An appropriate error should've been already pushed by callback. */
        bad_children= TRUE;
        continue;
      }
      goto bad_children;
    }

    DBUG_PRINT("myrg", ("child_nr: %u  table: '%s'",
                        child_nr, myisam->filename));

    /* Special handling when the first child is attached. */
    if (first_child)
    {
      first_child= FALSE;
      m_info->reclength= myisam->s->base.reclength;
      min_keys=  myisam->s->base.keys;
      key_parts= myisam->s->base.key_parts;
      if (*need_compat_check && m_info->rec_per_key_part)
      {
        my_free(m_info->rec_per_key_part);
        m_info->rec_per_key_part= NULL;
      }
      if (!m_info->rec_per_key_part)
      {
        if(!(m_info->rec_per_key_part= (ulong*)
             my_malloc(key_parts * sizeof(long), MYF(MY_WME))))
          goto err; /* purecov: inspected */
        errpos= 1;
      }
      bzero((char*) m_info->rec_per_key_part, key_parts * sizeof(long));
    }

    /* Add MyISAM table info. */
    m_info->open_tables[child_nr].table= myisam;
    m_info->open_tables[child_nr].file_offset= (my_off_t) file_offset;
    file_offset+= myisam->state->data_file_length;

    /* Check table definition match. */
    if (m_info->reclength != myisam->s->base.reclength)
    {
      DBUG_PRINT("error", ("definition mismatch table: '%s'  repair: %d",
                           myisam->filename,
                           (handle_locking & HA_OPEN_FOR_REPAIR)));
      if (handle_locking & HA_OPEN_FOR_REPAIR)
      {
        myrg_print_wrong_table(myisam->filename);
        bad_children= TRUE;
        continue;
      }
      goto bad_children;
    }

    m_info->options|= myisam->s->options;
    m_info->records+= myisam->state->records;
    m_info->del+= myisam->state->del;
    m_info->data_file_length+= myisam->state->data_file_length;
    if (min_keys > myisam->s->base.keys)
      min_keys= myisam->s->base.keys; /* purecov: inspected */
    for (idx= 0; idx < key_parts; idx++)
      m_info->rec_per_key_part[idx]+= (myisam->s->state.rec_per_key_part[idx] /
                                       m_info->tables);
  }

  if (bad_children)
    goto bad_children;

//.........这里部分代码省略.........

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ MYGUI_ASSERT函数代码示例发布时间:2022-05-30
下一篇:
C++ MYASSERT函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap