C++ MapNode函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MapNode函数的典型用法代码示例。如果您正苦于以下问题：C++ MapNode函数的具体用法？C++ MapNode怎么用？C++ MapNode使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MapNode函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: p

void TestVoxelAlgorithms::testClearLightAndCollectSources(INodeDefManager *ndef)
{
	VoxelManipulator v;

	for (u16 z = 0; z < 3; z++)
	for (u16 y = 0; y < 3; y++)
	for (u16 x = 0; x < 3; x++) {
		v3s16 p(x,y,z);
		v.setNode(p, MapNode(CONTENT_AIR));
	}

	VoxelArea a(v3s16(0,0,0), v3s16(2,2,2));
	v.setNodeNoRef(v3s16(0,0,0), MapNode(t_CONTENT_STONE));
	v.setNodeNoRef(v3s16(1,1,1), MapNode(t_CONTENT_TORCH));

	{
		MapNode n(CONTENT_AIR);
		n.setLight(LIGHTBANK_DAY, 1, ndef);
		v.setNode(v3s16(1,1,2), n);
	}

	{
		std::set<v3s16> light_sources;
		std::map<v3s16, u8> unlight_from;
		voxalgo::clearLightAndCollectSources(v, a, LIGHTBANK_DAY,
				ndef, light_sources, unlight_from);
		//v.print(dstream, ndef, VOXELPRINT_LIGHT_DAY);
		UASSERT(v.getNode(v3s16(0,1,1)).getLight(LIGHTBANK_DAY, ndef) == 0);
		UASSERT(light_sources.find(v3s16(1,1,1)) != light_sources.end());
		UASSERT(light_sources.size() == 1);
		UASSERT(unlight_from.find(v3s16(1,1,2)) != unlight_from.end());
		UASSERT(unlight_from.size() == 1);
	}
}

开发者ID:MultiCraftProject，项目名称:MultiCraft，代码行数:34，代码来源:test_voxelalgorithms.cpp

示例2: contour

void MapgenFractal::generateCaves(s16 max_stone_y)
{
	if (max_stone_y < node_min.Y)
		return;

	noise_cave1->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
	noise_cave2->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);

	v3s16 em = vm->m_area.getExtent();
	u32 index2d = 0;

	for (s16 z = node_min.Z; z <= node_max.Z; z++)
	for (s16 x = node_min.X; x <= node_max.X; x++, index2d++) {
		bool column_is_open = false;  // Is column open to overground
		u32 vi = vm->m_area.index(x, node_max.Y + 1, z);
		u32 index3d = (z - node_min.Z) * zstride + (csize.Y + 1) * ystride +
			(x - node_min.X);
		// Biome of column
		Biome *biome = (Biome *)bmgr->getRaw(biomemap[index2d]);

		for (s16 y = node_max.Y + 1; y >= node_min.Y - 1;
				y--, index3d -= ystride, vm->m_area.add_y(em, vi, -1)) {
			content_t c = vm->m_data[vi].getContent();
			if (c == CONTENT_AIR || c == biome->c_water_top ||
					c == biome->c_water) {
				column_is_open = true;
				continue;
			}
			// Ground
			float d1 = contour(noise_cave1->result[index3d]);
			float d2 = contour(noise_cave2->result[index3d]);
			if (d1 * d2 > 0.3f && ndef->get(c).is_ground_content) {
				// In tunnel and ground content, excavate
				vm->m_data[vi] = MapNode(CONTENT_AIR);
			} else if (column_is_open &&
					(c == biome->c_filler || c == biome->c_stone)) {
				// Tunnel entrance floor
				vm->m_data[vi] = MapNode(biome->c_top);
				column_is_open = false;
			} else {
				column_is_open = false;
			}
		}
	}

	if (node_max.Y > MGFRACTAL_LARGE_CAVE_DEPTH)
		return;

	PseudoRandom ps(blockseed + 21343);
	u32 bruises_count = ps.range(0, 2);
	for (u32 i = 0; i < bruises_count; i++) {
		CaveV5 cave(this, &ps);
		cave.makeCave(node_min, node_max, max_stone_y);
	}
}

开发者ID:voronaam，项目名称:freeminer，代码行数:55，代码来源:mapgen_fractal.cpp

示例3: n_air

void MapgenV7::generateTerrain() {
	MapNode n_air(CONTENT_AIR), n_water_source(c_water_source);
	MapNode n_stone(c_stone);

	v3s16 em = vm->m_area.getExtent();
	u32 index = 0;
	
	for (s16 z = node_min.Z; z <= node_max.Z; z++)
	for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
		s16 surface_y = heightmap[index];
		Biome *biome = bmgr->biomes[biomemap[index]];
		
		u32 i = vm->m_area.index(x, node_min.Y, z);
		for (s16 y = node_min.Y; y <= node_max.Y; y++) {
			if (vm->m_data[i].getContent() == CONTENT_IGNORE) {
				if (y <= surface_y) {
					vm->m_data[i] = (y > water_level + biome->filler_height) ?
						MapNode(biome->c_filler) : n_stone;
				} else if (y <= water_level) {
					vm->m_data[i] = n_water_source;
				} else {
					vm->m_data[i] = n_air;
				}
			}
			vm->m_area.add_y(em, i, 1);
		}
	}
}

开发者ID:0gb-us，项目名称:minetest，代码行数:28，代码来源:mapgen_v7.cpp

示例4: v3s16

void MeshMakeData::fillSingleNode(MapNode *node)
{
	m_blockpos = v3s16(0,0,0);

#if !defined(MESH_ZEROCOPY)
	v3s16 blockpos_nodes = v3s16(0,0,0);
	VoxelArea area(blockpos_nodes-v3s16(1,1,1)*MAP_BLOCKSIZE,
			blockpos_nodes+v3s16(1,1,1)*MAP_BLOCKSIZE*2-v3s16(1,1,1));
	s32 volume = area.getVolume();
	s32 our_node_index = area.index(1,1,1);

	// Allocate this block + neighbors
	m_vmanip.clear();
	m_vmanip.addArea(area);

	// Fill in data
	MapNode *data = reinterpret_cast<MapNode*>( ::operator new(volume * sizeof(MapNode)));
	for(s32 i = 0; i < volume; i++)
	{
		if(i == our_node_index)
		{
			data[i] = *node;
		}
		else
		{
			data[i] = MapNode(CONTENT_AIR, LIGHT_MAX, 0);
		}
	}
	m_vmanip.copyFrom(data, area, area.MinEdge, area.MinEdge, area.getExtent());
	delete[] data;
#endif
}

开发者ID:gourytch，项目名称:freeminer，代码行数:32，代码来源:mapblock_mesh.cpp

示例5: MapNode

void MapgenV7::dustTopNodes()
{
	v3s16 em = vm->m_area.getExtent();
	u32 index = 0;

	if (water_level > node_max.Y)
		return;

	for (s16 z = node_min.Z; z <= node_max.Z; z++)
	for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
		Biome *biome = (Biome *)bmgr->get(biomemap[index]);

		if (biome->c_dust == CONTENT_IGNORE)
			continue;

		s16 y = node_max.Y;
		u32 vi = vm->m_area.index(x, y, z);
		for (; y >= node_min.Y; y--) {
			if (vm->m_data[vi].getContent() != CONTENT_AIR)
				break;

			vm->m_area.add_y(em, vi, -1);
		}

		content_t c = vm->m_data[vi].getContent();
		if (!ndef->get(c).buildable_to && c != CONTENT_IGNORE) {
			if (y == node_max.Y)
				continue;

			vm->m_area.add_y(em, vi, 1);
			vm->m_data[vi] = MapNode(biome->c_dust);
		}
	}
}

开发者ID:KodexKy，项目名称:minetest，代码行数:34，代码来源:mapgen_v7.cpp

示例6: MapNode

void Mapgen_features::layers_init(EmergeManager *emerge, const Json::Value & paramsj) {
    const auto & layersj = paramsj["layers"];
    INodeDefManager *ndef = emerge->ndef;
    auto layer_default_thickness = paramsj.get("layer_default_thickness", 1).asInt();
    auto layer_thickness_multiplier = paramsj.get("layer_thickness_multiplier", 1).asInt();
    if (!layersj.empty())
        for (unsigned int i = 0; i < layersj.size(); ++i) {
            if (layersj[i].empty())
                continue;
            const auto & layerj = layersj[i];
            const auto & name = layerj["name"].asString();
            if (name.empty())
                continue;
            auto content = ndef->getId(name);
            if (content == CONTENT_IGNORE)
                continue;

            auto layer = layer_data{ content, MapNode(content, layerj["param1"].asInt(), layerj["param2"].asInt()) };
            layer.height_min = layerj.get("y_min", layerj.get("height_min", -MAX_MAP_GENERATION_LIMIT).asInt()).asInt();
            layer.height_max = layerj.get("y_max", layerj.get("height_max", +MAX_MAP_GENERATION_LIMIT).asInt()).asInt();
            layer.thickness  = layerj.get("thickness", layer_default_thickness).asInt() * layer_thickness_multiplier;

            //layer.name = name; //dev
            layers.emplace_back(layer);
        }
    if (layers.empty())
        infostream << "layers empty, using only default:stone mg_params="<<paramsj<<std::endl;
    else
        verbosestream << "layers size=" << layers.size() << std::endl;
}

开发者ID:ChunHungLiu，项目名称:freeminer，代码行数:30，代码来源:mapgen_indev.cpp

示例7: Setting

void TestVoxelManipulator::testVoxelManipulator(INodeDefManager *nodedef)
{
	VoxelManipulator v;

	v.print(infostream, nodedef);

	infostream << "*** Setting (-1,0,-1)=2 ***" << std::endl;
	v.setNodeNoRef(v3s16(-1,0,-1), MapNode(t_CONTENT_GRASS));

	v.print(infostream, nodedef);
	UASSERT(v.getNode(v3s16(-1,0,-1)).getContent() == t_CONTENT_GRASS);

	infostream << "*** Reading from inexistent (0,0,-1) ***" << std::endl;

	EXCEPTION_CHECK(InvalidPositionException, v.getNode(v3s16(0,0,-1)));
	v.print(infostream, nodedef);

	infostream << "*** Adding area ***" << std::endl;

	VoxelArea a(v3s16(-1,-1,-1), v3s16(1,1,1));
	v.addArea(a);
	v.print(infostream, nodedef);

	UASSERT(v.getNode(v3s16(-1,0,-1)).getContent() == t_CONTENT_GRASS);
	EXCEPTION_CHECK(InvalidPositionException, v.getNode(v3s16(0,1,1)));
}

开发者ID:00c，项目名称:minetest，代码行数:26，代码来源:test_voxelmanipulator.cpp

示例8: contour

void MapgenV7::generateCaves(s16 max_stone_y)
{
	if (max_stone_y >= node_min.Y) {
		u32 index   = 0;

		for (s16 z = node_min.Z; z <= node_max.Z; z++)
		for (s16 y = node_min.Y - 1; y <= node_max.Y + 1; y++) {
			u32 i = vm->m_area.index(node_min.X, y, z);
			for (s16 x = node_min.X; x <= node_max.X; x++, i++, index++) {
				float d1 = contour(noise_cave1->result[index]);
				float d2 = contour(noise_cave2->result[index]);
				if (d1 * d2 > 0.3) {
					content_t c = vm->m_data[i].getContent();
					if (!ndef->get(c).is_ground_content || c == CONTENT_AIR)
						continue;

					vm->m_data[i] = MapNode(CONTENT_AIR);
				}
			}
		}
	}

	PseudoRandom ps(blockseed + 21343);
	u32 bruises_count = (ps.range(1, 4) == 1) ? ps.range(1, 2) : 0;
	for (u32 i = 0; i < bruises_count; i++) {
		CaveV7 cave(this, &ps);
		cave.makeCave(node_min, node_max, max_stone_y);
	}
}

开发者ID:nathanlol5，项目名称:minetest，代码行数:29，代码来源:mapgen_v7.cpp

示例9: size

void TestSchematic::testLuaTableSerialize(INodeDefManager *ndef)
{
	static const v3s16 size(3, 3, 3);
	static const u32 volume = size.X * size.Y * size.Z;

	Schematic schem;

	schem.flags       = 0;
	schem.size        = size;
	schem.schemdata   = new MapNode[volume];
	schem.slice_probs = new u8[size.Y];
	for (size_t i = 0; i != volume; i++)
		schem.schemdata[i] = MapNode(test_schem2_data[i], test_schem2_prob[i], 0);
	for (s16 y = 0; y != size.Y; y++)
		schem.slice_probs[y] = MTSCHEM_PROB_ALWAYS;

	std::vector<std::string> names;
	names.push_back("air");
	names.push_back("default:lava_source");
	names.push_back("default:glass");

	std::ostringstream ss(std::ios_base::binary);

	UASSERT(schem.serializeToLua(&ss, names, false, 0));
	UASSERTEQ(std::string, ss.str(), expected_lua_output);
}

开发者ID:MultiCraftProject，项目名称:MultiCraft，代码行数:26，代码来源:test_schematic.cpp

示例10: MYMIN

void DecoSimple::generate(Mapgen *mg, PseudoRandom *pr, s16 max_y, v3s16 p)
{
	ManualMapVoxelManipulator *vm = mg->vm;

	if (!canPlaceDecoration(vm, p))
		return;

	content_t c_place = c_decos[pr->range(0, c_decos.size() - 1)];

	s16 height = (deco_height_max > 0) ?
		pr->range(deco_height, deco_height_max) : deco_height;

	height = MYMIN(height, max_y - p.Y);

	v3s16 em = vm->m_area.getExtent();
	u32 vi = vm->m_area.index(p);
	for (int i = 0; i < height; i++) {
		vm->m_area.add_y(em, vi, 1);

		content_t c = vm->m_data[vi].getContent();
		if (c != CONTENT_AIR && c != CONTENT_IGNORE)
			break;

		vm->m_data[vi] = MapNode(c_place);
	}
}

开发者ID:1CoreyDev1，项目名称:minetest，代码行数:26，代码来源:mg_decoration.cpp

示例11: v3s16

void MeshMakeData::fillSingleNode(MapNode *node)
{
	m_blockpos = v3s16(0,0,0);
	
	v3s16 blockpos_nodes = v3s16(0,0,0);
	VoxelArea area(blockpos_nodes-v3s16(1,1,1)*MAP_BLOCKSIZE,
			blockpos_nodes+v3s16(1,1,1)*MAP_BLOCKSIZE*2-v3s16(1,1,1));
	s32 volume = area.getVolume();
	s32 our_node_index = area.index(1,1,1);

	// Allocate this block + neighbors
	m_vmanip.clear();
	m_vmanip.addArea(area);

	// Fill in data
	MapNode *data = new MapNode[volume];
	for(s32 i = 0; i < volume; i++)
	{
		if(i == our_node_index)
		{
			data[i] = *node;
		}
		else
		{
			data[i] = MapNode(CONTENT_AIR, LIGHT_MAX, 0);
		}
	}
	m_vmanip.copyFrom(data, area, area.MinEdge, area.MinEdge, area.getExtent());
	delete[] data;
}

开发者ID:andrew889，项目名称:minetest-1，代码行数:30，代码来源:mapblock_mesh.cpp

示例12: if

int MapgenV5::generateBaseTerrain()
{
    u32 index = 0;
    u32 index2d = 0;
    int stone_surface_max_y = -MAX_MAP_GENERATION_LIMIT;

    noise_factor->perlinMap2D(node_min.X, node_min.Z);
    noise_height->perlinMap2D(node_min.X, node_min.Z);
    noise_ground->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);

    for (s16 z=node_min.Z; z<=node_max.Z; z++) {
        for (s16 y=node_min.Y - 1; y<=node_max.Y + 1; y++) {
            u32 vi = vm->m_area.index(node_min.X, y, z);
            for (s16 x=node_min.X; x<=node_max.X; x++, vi++, index++, index2d++) {
                if (vm->m_data[vi].getContent() != CONTENT_IGNORE)
                    continue;

                float f = 0.55 + noise_factor->result[index2d];
                if (f < 0.01)
                    f = 0.01;
                else if (f >= 1.0)
                    f *= 1.6;
                float h = noise_height->result[index2d];

                if (noise_ground->result[index] * f < y - h) {
                    if (y <= water_level) {
                        vm->m_data[vi] = MapNode(c_water_source);
                        if (liquid_pressure && y <= 0)
                            vm->m_data[vi].addLevel(m_emerge->ndef, water_level - y, 1);
                    }
                    else
                        vm->m_data[vi] = MapNode(CONTENT_AIR);
                } else {
                    vm->m_data[vi] = layers_get(index);
                    if (y > stone_surface_max_y)
                        stone_surface_max_y = y;
                }
            }
            index2d -= ystride;
        }
        index2d += ystride;
    }

    return stone_surface_max_y;
}

开发者ID:yzziizzy，项目名称:freeminer，代码行数:45，代码来源:mapgen_v5.cpp

示例13: makeHole

void DungeonGen::makeDoor(v3s16 doorplace, v3s16 doordir)
{
	makeHole(doorplace);

#ifdef DGEN_USE_TORCHES
	// Place torch (for testing)
	vm->m_data[vm->m_area.index(doorplace)] = MapNode(c_torch);
#endif
}

开发者ID:t0suj4，项目名称:minetest，代码行数:9，代码来源:dungeongen.cpp

示例14: sp

MapNode Map::getNodeTry(v3POS p) {
#ifndef NDEBUG
	ScopeProfiler sp(g_profiler, "Map: getNodeTry");
#endif
	auto blockpos = getNodeBlockPos(p);
	auto block = getBlockNoCreateNoEx(blockpos, true);
	if(!block)
		return MapNode(CONTENT_IGNORE);
	auto relpos = p - blockpos * MAP_BLOCKSIZE;
	return block->getNodeTry(relpos);
}

开发者ID:Selat，项目名称:freeminer，代码行数:11，代码来源:fm_map.cpp

示例15: floatToInt

/**
 * Helper function for Client Side Modding
 * Flavour is applied there, this should not be used for core engine
 * @param p
 * @param is_valid_position
 * @return
 */
MapNode Client::getNode(v3s16 p, bool *is_valid_position)
{
	if (checkCSMFlavourLimit(CSMFlavourLimit::CSM_FL_LOOKUP_NODES)) {
		v3s16 ppos = floatToInt(m_env.getLocalPlayer()->getPosition(), BS);
		if ((u32) ppos.getDistanceFrom(p) > m_csm_noderange_limit) {
			*is_valid_position = false;
			return MapNode();
		}
	}
	return m_env.getMap().getNodeNoEx(p, is_valid_position);
}

开发者ID:TeTpaAka，项目名称:minetest，代码行数:18，代码来源:client.cpp

示例16: MapNode

MapNode MapBlock::getNodeParent(v3s16 p, bool *is_valid_position)
{
	if (isValidPosition(p) == false)
		return m_parent->getNodeTry(getPosRelative() + p);

	if (data == NULL) {
		if (is_valid_position)
			*is_valid_position = false;
		return MapNode(CONTENT_IGNORE);
	}
	auto lock = try_lock_shared_rec();
	if (!lock->owns_lock()) {
		if (is_valid_position)
			*is_valid_position = false;
		return MapNode(CONTENT_IGNORE);
	}

	if (is_valid_position)
		*is_valid_position = true;
	return data[p.Z*MAP_BLOCKSIZE*MAP_BLOCKSIZE + p.Y*MAP_BLOCKSIZE + p.X];
}

开发者ID:daniel-santos，项目名称:freeminer，代码行数:21，代码来源:mapblock.cpp

示例17: catch

MapNode MapBlock::getNodeParentNoEx(v3s16 p)
{
	if(isValidPosition(p) == false)
	{
		try{
			return m_parent->getNode(getPosRelative() + p);
		}
		catch(InvalidPositionException &e)
		{
			return MapNode(CONTENT_IGNORE);
		}
	}
	else
	{
		if(data == NULL)
		{
			return MapNode(CONTENT_IGNORE);
		}
		return data[p.Z*MAP_BLOCKSIZE*MAP_BLOCKSIZE + p.Y*MAP_BLOCKSIZE + p.X];
	}
}

开发者ID:wowiamdiamonds，项目名称:minetest，代码行数:21，代码来源:mapblock.cpp

示例18: v3s16

void DecoSimple::generate(Mapgen *mg, PseudoRandom *pr, s16 max_y, v3s16 p) {
	ManualMapVoxelManipulator *vm = mg->vm;

	u32 vi = vm->m_area.index(p);
	if (vm->m_data[vi].getContent() != c_place_on &&
		c_place_on != CONTENT_IGNORE)
		return;

	if (nspawnby != -1) {
		int nneighs = 0;
		v3s16 dirs[8] = { // a Moore neighborhood
			v3s16( 0, 0,  1),
			v3s16( 0, 0, -1),
			v3s16( 1, 0,  0),
			v3s16(-1, 0,  0),
			v3s16( 1, 0,  1),
			v3s16(-1, 0,  1),
			v3s16(-1, 0, -1),
			v3s16( 1, 0, -1)
		};

		for (int i = 0; i != 8; i++) {
			u32 index = vm->m_area.index(p + dirs[i]);
			if (vm->m_area.contains(index) &&
				vm->m_data[index].getContent() == c_spawnby)
				nneighs++;
		}

		if (nneighs < nspawnby)
			return;
	}

	size_t ndecos = c_decolist.size();
	content_t c_place = ndecos ? c_decolist[pr->range(0, ndecos - 1)] : c_deco;

	s16 height = (deco_height_max > 0) ?
		pr->range(deco_height, deco_height_max) : deco_height;

	height = MYMIN(height, max_y - p.Y);

	v3s16 em = vm->m_area.getExtent();
	for (int i = 0; i < height; i++) {
		vm->m_area.add_y(em, vi, 1);

		content_t c = vm->m_data[vi].getContent();
		if (c != CONTENT_AIR && c != CONTENT_IGNORE)
			break;

		vm->m_data[vi] = MapNode(c_place);
	}
}

开发者ID:Nate-Devv，项目名称:freeminer，代码行数:51，代码来源:mapgen.cpp

示例19: if

int MapgenV5::generateBaseTerrain()
{
	u32 index = 0;
	u32 index2d = 0;
	int stone_surface_max_y = -MAP_GENERATION_LIMIT;

	for (s16 z=node_min.Z; z<=node_max.Z; z++) {
		for (s16 y=node_min.Y - 1; y<=node_max.Y + 1; y++) {
			u32 i = vm->m_area.index(node_min.X, y, z);
			for (s16 x=node_min.X; x<=node_max.X; x++, i++, index++, index2d++) {
				if (vm->m_data[i].getContent() != CONTENT_IGNORE)
					continue;

				float f = 0.55 + noise_factor->result[index2d];
				if (f < 0.01)
					f = 0.01;
				else if (f >= 1.0)
					f *= 1.6;
				float h = noise_height->result[index2d];

				if (noise_ground->result[index] * f < y - h) {
					if (y <= water_level)
						vm->m_data[i] = MapNode(c_water_source);
					else
						vm->m_data[i] = MapNode(CONTENT_AIR);
				} else {
					vm->m_data[i] = MapNode(c_stone);
					if (y > stone_surface_max_y)
						stone_surface_max_y = y;
				}
			}
			index2d -= ystride;
		}
		index2d += ystride;
	}

	return stone_surface_max_y;
}

开发者ID:MirceaKitsune，项目名称:minetest，代码行数:38，代码来源:mapgen_v5.cpp

示例20: MapNode

MapNode MapBlock::getNodeParent(v3s16 p, bool *is_valid_position)
{
    if (isValidPosition(p) == false)
        return m_parent->getNodeNoEx(getPosRelative() + p, is_valid_position);

    if (data == NULL) {
        if (is_valid_position)
            *is_valid_position = false;
        return MapNode(CONTENT_IGNORE);
    }
    if (is_valid_position)
        *is_valid_position = true;
    return data[p.Z*MAP_BLOCKSIZE*MAP_BLOCKSIZE + p.Y*MAP_BLOCKSIZE + p.X];
}

开发者ID:TriBlade9，项目名称:minetest，代码行数:14，代码来源:mapblock.cpp

注：本文中的MapNode函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MapSet函数代码示例发布时间：2022-05-30

C++ MapName函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18213|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9656|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8168|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8418|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8403|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ MapNode函数代码示例

示例1: p

示例2: contour

示例3: n_air

示例4: v3s16

示例5: MapNode

示例6: MapNode

示例7: Setting

示例8: contour

示例9: size

示例10: MYMIN

示例11: v3s16

示例12: if

示例13: makeHole

示例14: sp

示例15: floatToInt

示例16: MapNode

示例17: catch

示例18: v3s16

示例19: if

示例20: MapNode

请发表评论

全部评论

上一篇：

下一篇：

OsbertWang/install-latex-guide-zh-cn: 一

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053