C++ MeasureTime函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MeasureTime函数的典型用法代码示例。如果您正苦于以下问题：C++ MeasureTime函数的具体用法？C++ MeasureTime怎么用？C++ MeasureTime使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MeasureTime函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: MeasureTime

//----------------------------------------------------------------------------
void BlendedAnimations::OnIdle ()
{
	MeasureTime();

	if (MoveObject())
	{
		mScene->Update(mAnimTime);
	}

	Update();

	if (mRenderer->PreDraw())
	{
		mRenderer->ClearBuffers();
		mRenderer->Draw(mVisibleSet);

		mRenderer->Draw(8, 16, mTextColor,
		                "Press UP-ARROW to transition from idle to walk.");

		mRenderer->Draw(8, 40, mTextColor,
		                "Press SHIFT-UP-ARROW to transition from walk to run.");

		char message[128];
		sprintf(message, "time = %6.4lf", mAnimTime);
		mRenderer->Draw(128, GetHeight()-8, mTextColor, message);

		DrawFrameRate(8, GetHeight()-8, mTextColor);

		mRenderer->PostDraw();
		mRenderer->DisplayColorBuffer();
	}

	UpdateFrameCount();
}

开发者ID:bhlzlx，项目名称:WildMagic，代码行数:35，代码来源:BlendedAnimations.cpp

示例2: MeasureTime

//----------------------------------------------------------------------------
void Delaunay3D::OnIdle ()
{
    MeasureTime();

    if (MoveCamera())
    {
        mCuller.ComputeVisibleSet(mScene);
    }

    if (MoveObject())
    {
        mScene->Update();
        mCuller.ComputeVisibleSet(mScene);
    }

    if (mRenderer->PreDraw())
    {
        mRenderer->ClearBuffers();
        mRenderer->Draw(mCuller.GetVisibleSet());
        mRenderer->PostDraw();
        mRenderer->DisplayColorBuffer();
    }

    UpdateFrameCount();
}

开发者ID:rasslingcats，项目名称:calico，代码行数:26，代码来源:Delaunay3D.cpp

示例3: MeasureTime

//----------------------------------------------------------------------------
void WrigglingSnake::OnIdle ()
{
    MeasureTime();

    MoveCamera();
    if (MoveObject())
    {
        mScene->Update();
    }

#ifndef SINGLE_STEP
    ModifyCurve();
#endif

    mCuller.ComputeVisibleSet(mScene);

    if (mRenderer->PreDraw())
    {
        mRenderer->ClearBuffers();
        mRenderer->Draw(mCuller.GetVisibleSet());
        DrawFrameRate(8, GetHeight()-8, mTextColor);
        mRenderer->PostDraw();
        mRenderer->DisplayColorBuffer();
    }

    UpdateFrameCount();
}

开发者ID:2asoft，项目名称:GeometricTools，代码行数:28，代码来源:WrigglingSnake.cpp

示例4: MeasureTime

//----------------------------------------------------------------------------
void VolumeTextures::OnIdle ()
{
	MeasureTime();

	if (MoveCamera())
	{
		mCuller.ComputeVisibleSet(mScene);
	}

	if (MoveObject())
	{
		mScene->Update();
		mCuller.ComputeVisibleSet(mScene);
	}

	if (mRenderer->PreDraw())
	{
		mRenderer->ClearBuffers();
		mRenderer->Draw(mCuller.GetVisibleSet());
		DrawFrameRate(8, GetHeight()-8, mTextColor);
		mRenderer->PostDraw();
		mRenderer->DisplayColorBuffer();
	}

	UpdateFrameCount();
}

开发者ID:bhlzlx，项目名称:WildMagic，代码行数:27，代码来源:VolumeTextures.cpp

示例5: MeasureTime

//----------------------------------------------------------------------------
void GelatinCube::OnIdle ()
{
    MeasureTime();

    bool bNeedSort = MoveCamera();
    if ( MoveObject() )
    {
        m_spkScene->UpdateGS(0.0f);
        bNeedSort = true;
    }
    if ( bNeedSort )
        m_spkBox->SortFaces(ms_spkCamera->GetDirection());

#ifndef SINGLE_STEP
    DoPhysical();
#endif

    ms_spkRenderer->ClearBuffers();
    if ( ms_spkRenderer->BeginScene() )
    {
        ms_spkRenderer->Draw(m_spkScene);
        DrawFrameRate(8,GetHeight()-8,ColorRGB::WHITE);
        ms_spkRenderer->EndScene();
    }
    ms_spkRenderer->DisplayBackBuffer();

    UpdateClicks();
}

开发者ID:Hengplank，项目名称:kucgbowling，代码行数:29，代码来源:GelatinCube.cpp

示例6: MeasureTime

//----------------------------------------------------------------------------
void PlanarShadows::OnIdle ()
{
	MeasureTime();

	if (MoveCamera())
	{
		mSceneCuller.ComputeVisibleSet(mScene);
		mBipedCuller.ComputeVisibleSet(mBiped);
	}

	if (MoveObject())
	{
		mScene->Update();
		mBiped->Update(mUpdateTime);
		mSceneCuller.ComputeVisibleSet(mScene);
		mBipedCuller.ComputeVisibleSet(mBiped);
	}

	if (mRenderer->PreDraw())
	{
		mRenderer->ClearBuffers();
		mRenderer->Draw(mSceneCuller.GetVisibleSet());
		mRenderer->Draw(mBipedCuller.GetVisibleSet(), mPSEffect);
		DrawFrameRate(8, GetHeight()-8, mTextColor);
		mRenderer->PostDraw();
		mRenderer->DisplayColorBuffer();
	}

	UpdateFrameCount();
}

开发者ID:bhlzlx，项目名称:WildMagic，代码行数:31，代码来源:PlanarShadows.cpp

示例7: MeasureTime

//----------------------------------------------------------------------------
void DynamicShader::OnIdle()
{
    MeasureTime();

    if( MoveCamera() )
    {
        m_Culler.ComputeUnculledSet(m_spScene);
    }

    //m_spScene->UpdateGS(SESystem::SE_GetTime());  // inefficient
    m_spController->Update(SESystem::SE_GetTime());

    if( MoveObject() )
    {
        m_spScene->UpdateGS();
        m_Culler.ComputeUnculledSet(m_spScene);
    }

    m_pRenderer->ClearBuffers();
    if( m_pRenderer->BeginScene() )
    {
        m_pRenderer->DrawScene(m_Culler.GetVisibleSet());
        DrawFrameRate(8, GetHeight()-8, SEColorRGBA::SE_RGBA_WHITE);
        m_pRenderer->EndScene();
    }
    m_pRenderer->DisplayBackBuffer();

    UpdateFrameCount();
}

开发者ID:jazzboysc，项目名称:SwingEngine1，代码行数:30，代码来源:DynamicShader.cpp

示例8: MeasureTime

//----------------------------------------------------------------------------
void DefaultShader::OnIdle()
{
    // Rotate the box.
    SEMatrix3f mat3fRot;
    mat3fRot.FromEulerAnglesXYZ(-0.02f, 0.02f, -0.02f);
    m_spMesh->Local.SetRotate(m_spMesh->Local.GetRotate()*mat3fRot);
    m_spMesh->UpdateGS();
    
    MeasureTime();

    if( MoveCamera() )
    {
        m_Culler.ComputeUnculledSet(m_spScene);
    }
    
    if( MoveObject() )
    {
        m_spScene->UpdateGS();
        m_Culler.ComputeUnculledSet(m_spScene);
    }
    
    m_pRenderer->ClearBuffers();
    if( m_pRenderer->BeginScene() )
    {
        m_pRenderer->DrawScene(m_Culler.GetVisibleSet());

        m_pRenderer->EndScene();
    }
    m_pRenderer->DisplayBackBuffer();
    
    UpdateFrameCount();
}

开发者ID:jazzboysc，项目名称:SwingEngine1，代码行数:33，代码来源:DefaultShader.cpp

示例9: MeasureTime

//----------------------------------------------------------------------------
void NonlocalBlowup::OnIdle ()
{
    MeasureTime();

    if (MoveCamera())
    {
        mCuller.ComputeVisibleSet(mScene);
    }

    if (MoveObject())
    {
        mScene->Update();
        mCuller.ComputeVisibleSet(mScene);
    }

    if (mRenderer->PreDraw())
    {
        mRenderer->ClearBuffers();
        mRenderer->Draw(mCuller.GetVisibleSet());
        mRenderer->PostDraw();
        if (mTakeSnapshot)
        {
            GetSnapshot();
            mTakeSnapshot = false;
        }
        mRenderer->DisplayColorBuffer();
    }

#ifndef SINGLE_STEP
    ExecuteSolver();
#endif

    UpdateFrameCount();
}

开发者ID:vijaynerella，项目名称:GeometricTools，代码行数:35，代码来源:NonlocalBlowup.cpp

示例10: MeasureTime

//----------------------------------------------------------------------------
void StructuredBuffersWindow::OnIdle()
{
    MeasureTime();

    MoveCamera();

    memset(mDrawnPixels->GetData(), 0, mDrawnPixels->GetNumBytes());
    mEngine->CopyCpuToGpu(mDrawnPixels);

    mEngine->ClearBuffers();
    mEngine->Draw(mSquare);

    mEngine->CopyGpuToCpu(mDrawnPixels);
    Vector4<float>* src = mDrawnPixels->Get<Vector4<float>>();
    unsigned int* trg = mDrawnPixelsTexture->Get<unsigned int>();
    for (int i = 0; i < mXSize*mYSize; ++i)
    {
        unsigned int r = static_cast<unsigned char>(255.0f*src[i][0]);
        unsigned int g = static_cast<unsigned char>(255.0f*src[i][1]);
        unsigned int b = static_cast<unsigned char>(255.0f*src[i][2]);
        trg[i] = r | (g << 8) | (b << 16) | (0xFF << 24);
    }
    WICFileIO::SaveToPNG("DrawnPixels.png", mDrawnPixelsTexture);

    DrawFrameRate(8, mYSize - 8, mTextColor);
    mEngine->DisplayColorBuffer(0);

    UpdateFrameCount();
}

开发者ID:rin-23，项目名称:OculusProjects，代码行数:30，代码来源:StructuredBuffersWindow.cpp

示例11: StartTimer

void LayerConv::Backward(Layer *prev_layer) {
  StartTimer();
  prev_layer->deriv_mat_.resize(prev_layer->batchsize_, prev_layer->length_);
  #if COMP_REGIME != 2
    std::vector< std::vector<Mat> > prev_deriv, filters, deriv;
    InitMaps(prev_layer->deriv_mat_, prev_layer->mapsize_, prev_deriv); 
    InitMaps(weights_.get(), filtersize_, filters);
    InitMaps(deriv_mat_, mapsize_, deriv);
    std::vector<size_t> padding_der(numdim_);
    for (size_t i = 0; i < numdim_; ++i) {
      padding_der[i] = filtersize_[i] - 1 - padding_[i];
    }
    prev_layer->deriv_mat_.assign(0);    
    #if COMP_REGIME == 1
      #pragma omp parallel for num_threads(12) schedule(static,10)
    #endif  
    for (int k = 0; k < batchsize_; ++k) {
      #if COMP_REGIME == 1
      //#pragma omp parallel for
      #endif
      for (size_t i = 0; i < outputmaps_; ++i) {      
        for (size_t j = 0; j < prev_layer->outputmaps_; ++j) {                        
          Mat der_mat(prev_layer->mapsize_);
          Filter(deriv[k][i], filters[i][j], padding_der, true, der_mat);
          prev_deriv[k][j] += der_mat;        
        }      
      }        
    }
  #else // GPU       
    ImgActs(deriv_mat_, weights_.get(), prev_layer->deriv_mat_, 
            prev_layer->mapsize_, filtersize_[0], padding_[0], !unshared_);        
  #endif
  prev_layer->deriv_mat_.Validate();
  MeasureTime("Backwards Conv Layer",1);
}

开发者ID:mwoodson1，项目名称:NeuroPhi，代码行数:35，代码来源:layer_c.cpp

示例12: MeasureTime

//----------------------------------------------------------------------------
void Lighting2::OnIdle()
{
    // Lights motion.
    static double dCurTime = 0.0f;
    static double dLastTime = 0.0f;
    static float fAngel0 = 0.0f;
    static float fAngel1 = SEMathf::PI;
    static float fRadius0 = 4.0f;
    static float fRadius1 = 4.0f;
    dCurTime = SESystem::SE_GetTime();
    if( dCurTime - dLastTime > 0.0001f )
    {
        dLastTime = dCurTime;
        fAngel0 += 0.04f;
        fAngel1 -= 0.04f;
        SEMatrix3f mat3fRot;

        mat3fRot.FromEulerAnglesXYZ(0.0f, -0.04f, 0.0f);
        m_spLight0Node->Local.SetRotate(m_spLight0Node->Local.GetRotate()
										*mat3fRot);
        float fX = fRadius0*SEMathf::Cos(fAngel0);
        float fZ = fRadius0*SEMathf::Sin(fAngel0);
        m_spLight0Node->Local.SetTranslate(SEVector3f(fX, m_fLight0Height, 
            fZ));
        m_spLight0Node->UpdateGS();

        mat3fRot.FromEulerAnglesXYZ(0.0f, 0.04f, 0.0f);
        m_spLight1Node->Local.SetRotate(m_spLight1Node->Local.GetRotate()
										*mat3fRot);
        fX = fRadius1*SEMathf::Cos(fAngel1);
        fZ = fRadius1*SEMathf::Sin(fAngel1);
        m_spLight1Node->Local.SetTranslate(SEVector3f(fX, m_fLight1Height, 
            fZ));
        m_spLight1Node->UpdateGS();
    }

    MeasureTime();

    if( MoveCamera() )
    {
        m_Culler.ComputeUnculledSet(m_spScene);
    }

    if( MoveObject() )
    {
        m_spScene->UpdateGS();
        m_Culler.ComputeUnculledSet(m_spScene);
    }

    m_pRenderer->ClearBuffers();
    if( m_pRenderer->BeginScene() )
    {
        m_pRenderer->DrawScene(m_Culler.GetVisibleSet());
        DrawFrameRate(8, GetHeight()-8, SEColorRGBA::SE_RGBA_WHITE);
        m_pRenderer->EndScene();
    }
    m_pRenderer->DisplayBackBuffer();

    UpdateFrameCount();
}

开发者ID:jazzboysc，项目名称:SwingEngine1，代码行数:61，代码来源:Lighting2.cpp

示例13: MeasureTime

//----------------------------------------------------------------------------
void PerformanceAMDWindow::OnIdle()
{
    MeasureTime();

    MoveCamera();
    UpdateConstants();

    mEngine->ClearBuffers();

    mPerformance.Profile([this]()
    {
        mEngine->Execute(mGenerateTexture, mNumXGroups, mNumYGroups, 1);
        mEngine->Draw(mTriangles);
    });

    // Compute the average measurements.  GetAverage allows you to access
    // the measurements during application run time.  SaveAverage calls
    // GetAverage and writes the results to a spreadsheet.
    std::vector<std::vector<AMDPerformance::Measurement>> measurements;
    if (mPerformance.GetNumProfileCalls() == 16)
    {
        mPerformance.GetAverage(measurements);
        mPerformance.SaveAverage("ProfileResults.csv");
    }

    DrawFrameRate(8, mYSize - 8, mTextColor);
    mEngine->DisplayColorBuffer(0);

    UpdateFrameCount();
}

开发者ID:rin-23，项目名称:OculusProjects，代码行数:31，代码来源:PerformanceAMDWindow.cpp

示例14: MeasureTime

//----------------------------------------------------------------------------
void BouncingTetrahedra::OnIdle ()
{
    MeasureTime();
    PhysicsTick();
    GraphicsTick();
    UpdateFrameCount();
}

开发者ID:vijaynerella，项目名称:GeometricTools，代码行数:8，代码来源:BouncingTetrahedra.cpp

示例15: MeasureTime

//----------------------------------------------------------------------------
void ClodMeshes::OnIdle ()
{
    MeasureTime();

    if (MoveCamera())
    {
        mCuller.ComputeVisibleSet(mScene);
    }

    if (MoveObject())
    {
        mScene->Update();
        mCuller.ComputeVisibleSet(mScene);
    }

    if (mRenderer->PreDraw())
    {
        mRenderer->ClearBuffers();
        mRenderer->Draw(mCuller.GetVisibleSet());
        DrawFrameRate(8, GetHeight()-8, mTextColor);

#ifdef USE_CLOD_MESH
        char message[256];
        sprintf(message, "triangles0: %4d   triangles1: %4d",
            mClod[0]->GetNumTriangles(), mClod[1]->GetNumTriangles());
        mRenderer->Draw(128, GetHeight()-8, mTextColor, message);
#endif

        mRenderer->PostDraw();
        mRenderer->DisplayColorBuffer();
    }

    UpdateFrameCount();
}

开发者ID:vijaynerella，项目名称:GeometricTools，代码行数:35，代码来源:ClodMeshes.cpp

示例16: Run

        void Run()
        {
            std::cout << std::endl << "run performance tests ..." << std::endl;

            //commands->SetRenderTarget(*context);

            MeasureTime(
                ( "MIP-map generation of " + std::to_string(config.numTextures) + " textures with size " +
                  std::to_string(config.textureSize) + " and " + std::to_string(config.arrayLayers) + " array layers" ),
                std::bind(&PerformanceTest::TestMIPMapGeneration, this)
            );
            MeasureTime(
                ( "MIP-map generation of " + std::to_string(config.numTextures) + " textures with size " +
                  std::to_string(config.textureSize) + " and only first " + std::to_string(config.numMipMaps) + " MIP-maps of first array layer" ),
                std::bind(&PerformanceTest::TestSubMIPMapGeneration, this)
            );

            //context->Present();
        }

开发者ID:LukasBanana，项目名称:LLGL，代码行数:19，代码来源:Test_Performance.cpp

示例17: MeasureTime

//----------------------------------------------------------------------------
void WireMeshWindow::OnIdle()
{
    MeasureTime();
    MoveCamera();

    mEngine->ClearBuffers();
    mEngine->Draw(mMesh);
    DrawFrameRate(8, mYSize-8, mTextColor);
    mEngine->DisplayColorBuffer(0);

    UpdateFrameCount();
}

开发者ID:rin-23，项目名称:OculusProjects，代码行数:13，代码来源:WireMeshWindow.cpp

示例18: StartTimer

void LayerFull::Backward(Layer *prev_layer) {
  StartTimer();
  prev_layer->deriv_mat_.resize(prev_layer->batchsize_, prev_layer->length_);
  Prod(deriv_mat_, false, weights_.get(), false, prev_layer->deriv_mat_);  
  if (prev_layer->type_ == "f") {
    LayerFull *layerfull = static_cast<LayerFull*>(prev_layer);
    if (layerfull->dropout_ > 0) {
      layerfull->deriv_mat_ *= layerfull->dropmat_;
    }  
  }
  prev_layer->deriv_mat_.Validate();
  MeasureTime("Backwards Full Layer",4);
}

开发者ID:mwoodson1，项目名称:NeuroPhi，代码行数:13，代码来源:layer_f.cpp

示例19: MeasureTime

//----------------------------------------------------------------------------
void GpuGaussianBlur3::OnIdle ()
{
    MeasureTime();

    if (mRenderer->PreDraw())
    {
        mIP->ExecuteStep(mRenderer, true);
        DrawFrameRate(8, GetHeight()-8, mTextColor);
        mRenderer->PostDraw();
        mRenderer->DisplayColorBuffer();
    }

    UpdateFrameCount();
}

开发者ID:2asoft，项目名称:GeometricTools，代码行数:15，代码来源:GpuGaussianBlur3.cpp

示例20: MeasureTime

//----------------------------------------------------------------------------
void GpuFluids2D::OnIdle ()
{
    MeasureTime();

    if (mRenderer->PreDraw())
    {
        mSmoke->DoSimulationStep();

        DrawFrameRate(8, GetHeight()-8, mTextColor);
        mRenderer->PostDraw();
        mRenderer->DisplayColorBuffer();
    }

    UpdateFrameCount();
}

开发者ID:vijaynerella，项目名称:GeometricTools，代码行数:16，代码来源:GpuFluids2D.cpp

注：本文中的MeasureTime函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MeasureUnit函数代码示例发布时间：2022-05-30

C++ Measure函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18213|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9656|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8168|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8418|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8403|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ MeasureTime函数代码示例

示例1: MeasureTime

示例2: MeasureTime

示例3: MeasureTime

示例4: MeasureTime

示例5: MeasureTime

示例6: MeasureTime

示例7: MeasureTime

示例8: MeasureTime

示例9: MeasureTime

示例10: MeasureTime

示例11: StartTimer

示例12: MeasureTime

示例13: MeasureTime

示例14: MeasureTime

示例15: MeasureTime

示例16: Run

示例17: MeasureTime

示例18: StartTimer

示例19: MeasureTime

示例20: MeasureTime

请发表评论

全部评论

上一篇：

下一篇：

OsbertWang/install-latex-guide-zh-cn: 一

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053