C++ MelderInfo_writeLine函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MelderInfo_writeLine函数的典型用法代码示例。如果您正苦于以下问题：C++ MelderInfo_writeLine函数的具体用法？C++ MelderInfo_writeLine怎么用？C++ MelderInfo_writeLine使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MelderInfo_writeLine函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: v_info

void structBandFilterSpectrogram :: v_info () {
	structDaata :: v_info ();
	MelderInfo_writeLine (U"Time domain:");
	MelderInfo_writeLine (U"   Start time: ", xmin, U" seconds");
	MelderInfo_writeLine (U"   End time: ", xmax, U" seconds");
	MelderInfo_writeLine (U"   Total duration: ", xmax - xmin, U" seconds");
	MelderInfo_writeLine (U"Time sampling:");
	MelderInfo_writeLine (U"   Number of time slices (frames): ", nx);
	MelderInfo_writeLine (U"   Time step (frame distance): ", dx, U" seconds");
	MelderInfo_writeLine (U"   First time slice (frame centre) at: ", x1, U" seconds");
}

开发者ID:davideberdin，项目名称:praat，代码行数:11，代码来源:Spectrogram_extensions.cpp

示例2: v_info

void structFormant :: v_info () {
	structData :: v_info ();
	MelderInfo_writeLine (U"Time domain:");
	MelderInfo_writeLine (U"   Start time: ", xmin, U" seconds");
	MelderInfo_writeLine (U"   End time: ", xmax, U" seconds");
	MelderInfo_writeLine (U"   Total duration: ", xmax - xmin, U" seconds");
	MelderInfo_writeLine (U"Time sampling:");
	MelderInfo_writeLine (U"   Number of frames: ", nx);
	MelderInfo_writeLine (U"   Time step: ", dx, U" seconds");
	MelderInfo_writeLine (U"   First frame centred at: ", x1, U" seconds");
}

开发者ID:psibre，项目名称:praat，代码行数:11，代码来源:Formant.cpp

示例3: v_info

void structIntensity :: v_info () {
	structData :: v_info ();
	MelderInfo_writeLine (L"Time domain:");
	MelderInfo_writeLine (L"   Start time: ", Melder_double (xmin), L" seconds");
	MelderInfo_writeLine (L"   End time: ", Melder_double (xmax), L" seconds");
	MelderInfo_writeLine (L"   Total duration: ", Melder_double (xmax - xmin), L" seconds");
	MelderInfo_writeLine (L"Time sampling:");
	MelderInfo_writeLine (L"   Number of frames: ", Melder_integer (nx));
	MelderInfo_writeLine (L"   Time step: ", Melder_double (dx), L" seconds");
	MelderInfo_writeLine (L"   First frame centred at: ", Melder_double (x1), L" seconds");
}

开发者ID:Crisil，项目名称:praat，代码行数:11，代码来源:Intensity.cpp

示例4: Pitch_difference

void Pitch_difference (Pitch me, Pitch thee) {
	long nuvtov = 0, nvtouv = 0, ndfdown = 0, ndfup = 0;
	if (my nx != thy nx || my dx != thy dx || my x1 != thy x1) {
		Melder_flushError (U"Pitch_difference: these Pitches are not aligned.");
		return;
	}
	for (long i = 1; i <= my nx; i ++) {
		double myf = my frame [i]. candidate [1]. frequency, thyf = thy frame [i]. candidate [1]. frequency;
		int myUnvoiced = myf == 0 || myf > my ceiling;
		int thyUnvoiced = thyf == 0 || thyf > thy ceiling;
		double t = Sampled_indexToX (me, i);
		if (myUnvoiced && ! thyUnvoiced) {
			Melder_casual (
				U"Frame ", i,
				U" time ", t,
				U": unvoiced to voiced."
			);
			nuvtov ++;
		} else if (! myUnvoiced && thyUnvoiced) {
			Melder_casual (
				U"Frame ", i,
				U" time ", t,
				U": voiced to unvoiced."
			);
			nvtouv ++;
		} else if (! myUnvoiced && ! thyUnvoiced) {
			if (myf > thyf) {
				//Melder_casual ("Frame %ld time %f: downward frequency jump from %.5g Hz to %.5g Hz.", i, t, myf, thyf);
				ndfdown ++;
			} else if (myf < thyf) {
				//Melder_casual ("Frame %ld time %f: upward frequency jump from %.5g Hz to %.5g Hz.", i, t, myf, thyf);
				ndfup ++;
			}
		}
	}
	MelderInfo_open ();
	MelderInfo_writeLine (U"Difference between two Pitches:");
	MelderInfo_writeLine (U"Unvoiced to voiced: ", nuvtov, U" frames.");
	MelderInfo_writeLine (U"Voiced to unvoiced: ", nvtouv, U" frames.");
	MelderInfo_writeLine (U"Downward frequency jump: ", ndfdown, U" frames.");
	MelderInfo_writeLine (U"Upward frequency jump: ", ndfup, U" frames.");
	MelderInfo_close ();
}

开发者ID:DsRQuicke，项目名称:praat，代码行数:43，代码来源:Pitch.cpp

示例5: v_info

void structMovie :: v_info ()
{
	structDaata :: v_info ();
	MelderInfo_writeLine (U"Start time: ", xmin, U" seconds");
	MelderInfo_writeLine (U"End time: ", xmax, U" seconds");
	MelderInfo_writeLine (U"Total duration: ", xmax - xmin, U" seconds");
	MelderInfo_writeLine (U"Time sampling:");
	MelderInfo_writeLine (U"   Number of frames: ", nx);
	MelderInfo_writeLine (U"   Frame duration: ", dx, U" seconds");
	MelderInfo_writeLine (U"   Frame rate: ", Melder_single (1.0 / dx), U" frames per second");
	MelderInfo_writeLine (U"   First frame centred at: ", x1, U" seconds");
}

开发者ID:guilhermegarcia，项目名称:praat-1，代码行数:12，代码来源:Movie.cpp

示例6: praat_reportIntegerProperties

void praat_reportIntegerProperties () {
	MelderInfo_open ();
	MelderInfo_writeLine (U"Integer properties of this edition of Praat on this computer:\n");
	MelderInfo_writeLine (U"A \"short integer\" is ",      sizeof (short)       * 8, U" bits.");
	MelderInfo_writeLine (U"An \"integer\" is ",           sizeof (int)         * 8, U" bits.");
	MelderInfo_writeLine (U"A \"long integer\" is ",       sizeof (long)        * 8, U" bits.");
	MelderInfo_writeLine (U"A \"long long integer\" is ",  sizeof (long long)   * 8, U" bits.");
	MelderInfo_writeLine (U"A pointer is ",                sizeof (void *)      * 8, U" bits.");
	MelderInfo_writeLine (U"A memory object size is ",     sizeof (size_t)      * 8, U" bits.");
	MelderInfo_writeLine (U"A file offset is ",            sizeof (off_t)       * 8, U" bits.");
	MelderInfo_close ();
}

开发者ID:guilhermegarcia，项目名称:praat-1，代码行数:12，代码来源:praat_statistics.cpp

示例7: Thing_listReadableClasses

long Thing_listReadableClasses () {
	Melder_clearInfo ();
	MelderInfo_open ();
	for (long iclass = 1; iclass <= theNumberOfReadableClasses; iclass ++) {
		ClassInfo klas = theReadableClasses [iclass];
		MelderInfo_writeLine (klas -> sequentialUniqueIdOfReadableClass, U"\t", klas -> className);
	}
	MelderInfo_close ();
	return theNumberOfReadableClasses;
}

开发者ID:jjatria，项目名称:praat，代码行数:10，代码来源:Thing.cpp

示例8: v_info

void structDurationTier :: v_info () {
	structData :: v_info ();
	MelderInfo_writeLine (U"Time domain:");
	MelderInfo_writeLine (U"   Start time: ", xmin, U" seconds");
	MelderInfo_writeLine (U"   End time: ", xmax, U" seconds");
	MelderInfo_writeLine (U"   Total original duration: ", xmax - xmin, U" seconds");
	MelderInfo_writeLine (U"Number of points: ", points -> size);
	MelderInfo_writeLine (U"Minimum relative duration value: ", RealTier_getMinimumValue (this));
	MelderInfo_writeLine (U"Maximum relative duration value: ", RealTier_getMaximumValue (this));
}

开发者ID:psibre，项目名称:praat，代码行数:10，代码来源:DurationTier.cpp

示例9: v_info

void structSpectrumTier :: v_info () {
    structDaata :: v_info ();
    MelderInfo_writeLine (U"Frequency domain:");
    MelderInfo_writeLine (U"   Lowest frequency: ", xmin, U" Hz");
    MelderInfo_writeLine (U"   Highest frequency: ", xmax, U" Hz");
    MelderInfo_writeLine (U"   Total bandwidth: ", xmax - xmin, U" Hz");
    MelderInfo_writeLine (U"Number of points: ", points -> size);
    MelderInfo_writeLine (U"Minimum power value: ", RealTier_getMinimumValue (this), U" dB/Hz");
    MelderInfo_writeLine (U"Maximum power value: ", RealTier_getMaximumValue (this), U" dB/Hz");
}

开发者ID:guilhermegarcia，项目名称:praat-1，代码行数:10，代码来源:SpectrumTier.cpp

示例10: v_info

void structCC :: v_info () {
	structDaata :: v_info ();
	MelderInfo_writeLine (U"Time domain:", xmin, U" to ", xmax, U" seconds");
	MelderInfo_writeLine (U"Number of frames: ", nx);
	MelderInfo_writeLine (U"Time step: ", dx, U" seconds");
	MelderInfo_writeLine (U"First frame at: ", x1, U" seconds");
	MelderInfo_writeLine (U"Number of coefficients: ", maximumNumberOfCoefficients);
	MelderInfo_writeLine (U"Minimum frequency: ", fmin, U" Hz");
	MelderInfo_writeLine (U"Maximum frequency: ", fmax, U" Hz");
}

开发者ID:woodst，项目名称:praat，代码行数:10，代码来源:CC.cpp

示例11: v_info

void structDurationTier :: v_info () {
	structData :: v_info ();
	MelderInfo_writeLine (L"Time domain:");
	MelderInfo_writeLine (L"   Start time: ", Melder_double (xmin), L" seconds");
	MelderInfo_writeLine (L"   End time: ", Melder_double (xmax), L" seconds");
	MelderInfo_writeLine (L"   Total original duration: ", Melder_double (xmax - xmin), L" seconds");
	MelderInfo_writeLine (L"Number of points: ", Melder_integer (points -> size));
	MelderInfo_writeLine (L"Minimum relative duration value: ", Melder_double (RealTier_getMinimumValue (this)));
	MelderInfo_writeLine (L"Maximum relative duration value: ", Melder_double (RealTier_getMaximumValue (this)));
}

开发者ID:Crisil，项目名称:praat，代码行数:10，代码来源:DurationTier.cpp

示例12: v_info

void structFFNet :: v_info () {
	structDaata :: v_info ();
	MelderInfo_writeLine (U"Number of layers: ", nLayers);
	MelderInfo_writeLine (U"Total number of units: ", FFNet_getNumberOfUnits (this));
	MelderInfo_writeLine (U"   Number of units in layer ", nLayers, U" (output): ", nUnitsInLayer[nLayers]);
	for (long i = nLayers - 1; i >= 1; i--) {
		MelderInfo_writeLine (U"   Number of units in layer ", i, U" (hidden): ", nUnitsInLayer[i]);
	}
	MelderInfo_writeLine (U"   Number of units in layer 0 (input): ", nUnitsInLayer[0]);
	MelderInfo_writeLine (U"Outputs are linear: ", Melder_boolean (outputsAreLinear));
	MelderInfo_writeLine (U"Number of weights: ", nWeights, U" (",
	                       FFNet_dimensionOfSearchSpace (this), U" selected)");
	MelderInfo_writeLine (U"Number of nodes: ", nNodes);
}

开发者ID:ffostertw，项目名称:praat，代码行数:14，代码来源:FFNet.cpp

示例13: praat_reportTextProperties

void praat_reportTextProperties () {
	MelderInfo_open ();
	MelderInfo_writeLine (U"Text properties of this edition of Praat on this computer:\n");
	MelderInfo_writeLine (U"Locale: ", Melder_peek8to32 (setlocale (LC_ALL, nullptr)));
	MelderInfo_writeLine (U"A \"char\" is ",                                      8, U" bits.");
	MelderInfo_writeLine (U"A \"char16_t\" is ",           sizeof (char16_t)    * 8, U" bits.");
	MelderInfo_writeLine (U"A \"wchar_t\" is ",            sizeof (wchar_t)     * 8, U" bits.");
	MelderInfo_writeLine (U"A \"char32_t\" is ",           sizeof (char32_t)    * 8, U" bits.");
	MelderInfo_close ();
}

开发者ID:guilhermegarcia，项目名称:praat-1，代码行数:10，代码来源:praat_statistics.cpp

示例14: infoPeriods

static void infoPeriods (PointProcess me, double shortestPeriod, double longestPeriod, double maximumPeriodFactor, int precision) {
	long numberOfPeriods = PointProcess_getNumberOfPeriods (me, 0.0, 0.0, shortestPeriod, longestPeriod, maximumPeriodFactor);
	double meanPeriod = PointProcess_getMeanPeriod (me, 0.0, 0.0, shortestPeriod, longestPeriod, maximumPeriodFactor);
	double stdevPeriod = PointProcess_getStdevPeriod (me, 0.0, 0.0, shortestPeriod, longestPeriod, maximumPeriodFactor);
	double jitter_local = PointProcess_getJitter_local (me, 0.0, 0.0, shortestPeriod, longestPeriod, maximumPeriodFactor);
	double jitter_local_absolute = PointProcess_getJitter_local_absolute (me, 0.0, 0.0, shortestPeriod, longestPeriod, maximumPeriodFactor);
	double jitter_rap = PointProcess_getJitter_rap (me, 0.0, 0.0, shortestPeriod, longestPeriod, maximumPeriodFactor);
	double jitter_ppq5 = PointProcess_getJitter_ppq5 (me, 0.0, 0.0, shortestPeriod, longestPeriod, maximumPeriodFactor);
	double jitter_ddp = PointProcess_getJitter_ddp (me, 0.0, 0.0, shortestPeriod, longestPeriod, maximumPeriodFactor);
	MelderInfo_writeLine (U"     Number of periods: ", numberOfPeriods);
	MelderInfo_writeLine (U"     Mean period: ", meanPeriod, U" seconds");
	MelderInfo_writeLine (U"     Stdev period: ", stdevPeriod, U" seconds");
	MelderInfo_writeLine (U"     Jitter (local): ", Melder_percent (jitter_local, precision));
	MelderInfo_writeLine (U"     Jitter (local, absolute): ", Melder_fixedExponent (jitter_local_absolute, -6, precision), U" seconds");
	MelderInfo_writeLine (U"     Jitter (rap): ", Melder_percent (jitter_rap, precision));
	MelderInfo_writeLine (U"     Jitter (ppq5): ", Melder_percent (jitter_ppq5, precision));
	MelderInfo_writeLine (U"     Jitter (ddp): ", Melder_percent (jitter_ddp, precision));
}

开发者ID:READSEARCH，项目名称:praat，代码行数:18，代码来源:PointProcess.cpp

示例15: v_info

void structLongSound :: v_info () {
	static const char32 *encodingStrings [1+20] = { U"none",
		U"linear 8 bit signed", U"linear 8 bit unsigned",
		U"linear 16 bit big-endian", U"linear 16 bit little-endian",
		U"linear 24 bit big-endian", U"linear 24 bit little-endian",
		U"linear 32 bit big-endian", U"linear 32 bit little-endian",
		U"mu-law", U"A-law", U"shorten", U"polyphone",
		U"IEEE float 32 bit big-endian", U"IEEE float 32 bit little-endian",
		U"FLAC", U"FLAC", U"FLAC", U"MP3", U"MP3", U"MP3" };
	structDaata :: v_info ();
	MelderInfo_writeLine (U"Duration: ", xmax - xmin, U" seconds");
	MelderInfo_writeLine (U"File name: ", Melder_fileToPath (& file));
	MelderInfo_writeLine (U"File type: ", audioFileType > Melder_NUMBER_OF_AUDIO_FILE_TYPES ? U"unknown" : Melder_audioFileTypeString (audioFileType));
	MelderInfo_writeLine (U"Number of channels: ", numberOfChannels);
	MelderInfo_writeLine (U"Encoding: ", encoding > 20 ? U"unknown" : encodingStrings [encoding]);
	MelderInfo_writeLine (U"Sampling frequency: ", sampleRate, U" Hz");
	MelderInfo_writeLine (U"Size: ", nx, U" samples");
	MelderInfo_writeLine (U"Start of sample data: ", startOfData, U" bytes from the start of the file");
}

开发者ID:PaulBoersma，项目名称:praat，代码行数:19，代码来源:LongSound.cpp

示例16: v_info

void structRegression :: v_info () {
	Regression_Parent :: v_info ();
	MelderInfo_writeLine (U"Factors:");
	MelderInfo_writeLine (U"   Number of factors: ", parameters -> size);
	for (long ivar = 1; ivar <= parameters -> size; ivar ++) {
		RegressionParameter parm = static_cast<RegressionParameter> (parameters -> item [ivar]);
		MelderInfo_writeLine (U"   Factor ", ivar, U": ", parm -> label);
	}
	MelderInfo_writeLine (U"Fitted coefficients:");
	MelderInfo_writeLine (U"   Intercept: ", intercept);
	for (long ivar = 1; ivar <= parameters -> size; ivar ++) {
		RegressionParameter parm = static_cast<RegressionParameter> (parameters -> item [ivar]);
		MelderInfo_writeLine (U"   Coefficient of factor ", parm -> label, U": ", parm -> value);
	}
	MelderInfo_writeLine (U"Ranges of values:");
	for (long ivar = 1; ivar <= parameters -> size; ivar ++) {
		RegressionParameter parm = static_cast<RegressionParameter> (parameters -> item [ivar]);
		MelderInfo_writeLine (U"   Range of factor ", parm -> label, U": minimum ",
			parm -> minimum, U", maximum ", parm -> maximum);
	}
}

开发者ID:eginhard，项目名称:praat，代码行数:21，代码来源:Regression.cpp

示例17: v_info

void structLogisticRegression :: v_info () {
	LogisticRegression_Parent :: v_info ();
	MelderInfo_writeLine (U"Dependent 1: ", our dependent1);
	MelderInfo_writeLine (U"Dependent 2: ", our dependent2);
	MelderInfo_writeLine (U"Interpretation:");
	MelderInfo_write (U"   ln (P(", dependent2, U")/P(", dependent1, U")) " UNITEXT_ALMOST_EQUAL_TO U" ", Melder_fixed (intercept, 6));
	for (long ivar = 1; ivar <= parameters.size; ivar ++) {
		RegressionParameter parm = parameters.at [ivar];
		MelderInfo_write (parm -> value < 0.0 ? U" - " : U" + ", Melder_fixed (fabs (parm -> value), 6), U" * ", parm -> label);
	}
	MelderInfo_writeLine (U"");
	MelderInfo_writeLine (U"Log odds ratios:");
	for (long ivar = 1; ivar <= parameters.size; ivar ++) {
		RegressionParameter parm = parameters.at [ivar];
		MelderInfo_writeLine (U"   Log odds ratio of factor ", parm -> label, U": ", Melder_fixed ((parm -> maximum - parm -> minimum) * parm -> value, 6));
	}
	MelderInfo_writeLine (U"Odds ratios:");
	for (long ivar = 1; ivar <= parameters.size; ivar ++) {
		RegressionParameter parm = parameters.at [ivar];
		MelderInfo_writeLine (U"   Odds ratio of factor ", parm -> label, U": ", exp ((parm -> maximum - parm -> minimum) * parm -> value));
	}
}

开发者ID:DsRQuicke，项目名称:praat，代码行数:22，代码来源:LogisticRegression.cpp

示例18: v_info

void structConfusion :: v_info () {
	double h, hx, hy, hygx, hxgy, uygx, uxgy, uxy, frac;
	long nCorrect;

	Confusion_getEntropies (this, & h, & hx, & hy, & hygx, & hxgy, & uygx, & uxgy, & uxy);
	Confusion_getFractionCorrect (this, & frac, & nCorrect);
	MelderInfo_writeLine (U"Number of rows: ", numberOfRows);
	MelderInfo_writeLine (U"Number of colums: ", numberOfColumns);
	MelderInfo_writeLine (U"Entropies (y is row variable):");
	MelderInfo_writeLine (U"  Total: ", h);
	MelderInfo_writeLine (U"  Y: ", hy);
	MelderInfo_writeLine (U"  X: ", hx);
	MelderInfo_writeLine (U"  Y given x: ", hygx);
	MelderInfo_writeLine (U"  X given y: ", hxgy);
	MelderInfo_writeLine (U"  Dependency of y on x; ", uygx);
	MelderInfo_writeLine (U"  Dependency of x on y: ", uxgy);
	MelderInfo_writeLine (U"  Symmetrical dependency: ", uxy);
	MelderInfo_writeLine (U"  Total number of entries: ", Confusion_getNumberOfEntries (this));
	MelderInfo_writeLine (U" Fraction correct: ", frac);
}

开发者ID:READSEARCH，项目名称:praat，代码行数:20，代码来源:Confusion.cpp

示例19: v_info

void structCrossCorrelationTable :: v_info () {
	structSSCP :: v_info ();
	double dm = CrossCorrelationTable_getDiagonalityMeasure (this);
	MelderInfo_writeLine (U"Diagonality measure: ", dm);
}

开发者ID:guilhermegarcia，项目名称:praat-1，代码行数:5，代码来源:ICA.cpp

示例20: readSound

static void readSound (ExperimentMFC me, const char32 *fileNameHead, const char32 *fileNameTail,
	double medialSilenceDuration, char32 **name, autoSound *sound)
{
	char32 fileNameBuffer [256], *fileNames = & fileNameBuffer [0];
	Melder_sprint (fileNameBuffer,256, *name);
	structMelderFile file = { 0 };
	/*
	 * The following conversion is needed when fileNameHead is an absolute path,
	 * and the stimulus names contain slashes for relative paths.
	 * An ugly case, but allowed.
	 */
	#if defined (_WIN32)
		for (;;) { char32 *slash = str32chr (fileNames, U'/'); if (! slash) break; *slash = U'\\'; }
	#endif
	sound->reset();
	char32 pathName [kMelder_MAXPATH+1];
	/*
	 * 'fileNames' can contain commas, which separate partial file names.
	 * The separate files should be concatenated.
	 */
	for (;;) {
		/*
		 * Determine partial file name.
		 */
		char32 *comma = str32chr (fileNames, U',');
		if (comma) *comma = '\0';
		/*
		 * Determine complete (relative) file name.
		 */
		Melder_sprint (pathName,kMelder_MAXPATH+1, fileNameHead, fileNames, fileNameTail);
		/*
		 * Make sure we are in the correct directory.
		 */
		if (MelderDir_isNull (& my rootDirectory)) {
			/*
			 * Absolute file name.
			 */
			Melder_pathToFile (pathName, & file);
		} else {
			/*
			 * Relative or absolute file name.
			 */
			MelderDir_relativePathToFile (& my rootDirectory, pathName, & file);
			if (Melder_debug == 32) {
				MelderInfo_open ();
				MelderInfo_writeLine (U"Path name <", pathName, U">");
				MelderInfo_writeLine (U"Root directory <", my rootDirectory.path, U">");
				MelderInfo_writeLine (U"Full path name <", file.path, U">");
				MelderInfo_close ();
			}
		}
		/*
		 * Read the substimulus.
		 */
		autoSound substimulus = Data_readFromFile (& file). static_cast_move<structSound>();
		if (substimulus -> classInfo != classSound)
			Melder_throw (U"File ", & file, U" contains a ", Thing_className (substimulus.get()), U" instead of a sound.");
		/*
		 * Check whether all sounds have the same number of channels.
		 */
		if (my numberOfChannels == 0) {
			my numberOfChannels = substimulus -> ny;
		} else if (substimulus -> ny != my numberOfChannels) {
			Melder_throw (U"The sound in file ", & file, U" has a different number of channels than some other sound.");
		}
		/*
		 * Check whether all sounds have the same sampling frequency.
		 */
		if (my samplePeriod == 0.0) {
			my samplePeriod = substimulus -> dx;   /* This must be the first sound read. */
		} else if (substimulus -> dx != my samplePeriod) {
			Melder_throw (U"The sound in file ", & file, U" has a different sampling frequency than some other sound.");
		}
		/*
		 * Append the substimuli, perhaps with silent intervals.
		 */
		if (*sound) {
			*sound = Sounds_append (sound->get(), medialSilenceDuration, substimulus.get());
		} else {
			*sound = substimulus.move();
		}
		/*
		 * Cycle.
		 */
		if (! comma) break;
		fileNames = & comma [1];
	}
}

开发者ID:READSEARCH，项目名称:praat，代码行数:88，代码来源:ExperimentMFC.cpp

注：本文中的MelderInfo_writeLine函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MelderString_copy函数代码示例发布时间：2022-05-30

C++ Media_GetSampleDesc函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18213|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9656|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8168|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8418|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8403|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ MelderInfo_writeLine函数代码示例

示例1: v_info

示例2: v_info

示例3: v_info

示例4: Pitch_difference

示例5: v_info

示例6: praat_reportIntegerProperties

示例7: Thing_listReadableClasses

示例8: v_info

示例9: v_info

示例10: v_info

示例11: v_info

示例12: v_info

示例13: praat_reportTextProperties

示例14: infoPeriods

示例15: v_info

示例16: v_info

示例17: v_info

示例18: v_info

示例19: v_info

示例20: readSound

请发表评论

全部评论

上一篇：

下一篇：

OsbertWang/install-latex-guide-zh-cn: 一

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053