C++ MicoGpioInitialize函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MicoGpioInitialize函数的典型用法代码示例。如果您正苦于以下问题：C++ MicoGpioInitialize函数的具体用法？C++ MicoGpioInitialize怎么用？C++ MicoGpioInitialize使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MicoGpioInitialize函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: init_platform

void init_platform( void )
{
  button_init_t init;

  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);

  init.gpio = EasyLink_BUTTON;
  init.pressed_func = PlatformEasyLinkButtonClickedCallback;
  init.long_pressed_func = PlatformEasyLinkButtonLongPressedCallback;
  init.long_pressed_timeout = 5000;

  button_init( IOBUTTON_EASYLINK, init );
  
#ifdef USE_MiCOKit_EXT
  dc_motor_init( );
  dc_motor_set( 0 );
  
  rgb_led_init();
  rgb_led_open(0, 0, 0);
#endif
}

开发者ID:OfficeKit，项目名称:OfficeKit_Embed_MiCO，代码行数:27，代码来源:platform.c

示例2: init_platform

void init_platform( void )
{
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
 // MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  //MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);
  
  //  Initialise EasyLink buttons
  MicoGpioInitialize( (mico_gpio_t)EasyLink_BUTTON, INPUT_PULL_UP );
  mico_init_timer(&_button_EL_timer, RestoreDefault_TimeOut, _button_EL_Timeout_handler, NULL);
  MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_BOTH_EDGES, _button_EL_irq_handler, NULL );

  //MicoFlashInitialize( MICO_SPI_FLASH );
  
#ifdef USE_MiCOKit_EXT
  dc_motor_init( );
  dc_motor_set( 0 );
  
  rgb_led_init();
  rgb_led_open(0, 0, 0);
#endif
}

开发者ID:hujg，项目名称:smartCup_micokit_V2.3.0.2，代码行数:25，代码来源:platform.c

示例3: PinInitForUsart

static void PinInitForUsart(void)
{
    MicoGpioInitialize(CONTROLLERBUS_PIN_MISO, INPUT_HIGH_IMPEDANCE);
    MicoGpioInitialize(CONTROLLERBUS_PIN_MOSI, INPUT_HIGH_IMPEDANCE);
    MicoGpioInitialize(CONTROLLERBUS_PIN_SCK, INPUT_HIGH_IMPEDANCE);
    MicoGpioInitialize(CONTROLLERBUS_PIN_NSS, INPUT_HIGH_IMPEDANCE);
}

开发者ID:HargicStudio，项目名称:SmartCup_MiCOKit_v2.4.0.0，代码行数:7，代码来源:controllerBus.c

示例4: host_enable_oob_interrupt

OSStatus host_enable_oob_interrupt( void )
{
    /* Set GPIO_B[1:0] to input. One of them will be re-purposed as OOB interrupt */
    MicoGpioInitialize( (mico_gpio_t)WL_GPIO0, OUTPUT_OPEN_DRAIN_NO_PULL );
    MicoGpioInitialize( (mico_gpio_t)WL_GPIO1, INPUT_HIGH_IMPEDANCE );
    //MicoGpioEnableIRQ( (mico_gpio_t)WL_GPIO1, IRQ_TRIGGER_RISING_EDGE, sdio_oob_irq_handler, 0 );

    return kNoErr;
}

开发者ID:playboy51job，项目名称:MiCO_v2.2.0，代码行数:9，代码来源:wlan_bus.c

示例5: init_platform_bootloader

void init_platform_bootloader( void )
{
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_HIGH_IMPEDANCE);
}

开发者ID:ChinaAmada，项目名称:MICO，代码行数:10，代码来源:platform.c

示例6: host_platform_deinit

OSStatus host_platform_deinit( void )
{
    MicoGpioInitialize((mico_gpio_t)WL_RESET, OUTPUT_PUSH_PULL);
    host_platform_reset_wifi( true ); /* Stop wifi chip in reset */
    
    MicoGpioInitialize((mico_gpio_t)WL_REG, OUTPUT_PUSH_PULL);
    host_platform_power_wifi( false ); /* Stop wifi chip with regulators off */

    platform_reset_wlan_powersave_clock( );

    return kNoErr;
}

开发者ID:diegoaugustus，项目名称:MICO，代码行数:12，代码来源:wlan_platform.c

示例7: rgb_led_init

void rgb_led_init(void)
{
#ifdef USE_RGB_LED_DRIVER_P9813
  MicoGpioInitialize( (mico_gpio_t)P9813_CIN, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioInitialize( (mico_gpio_t)P9813_DIN, OUTPUT_OPEN_DRAIN_NO_PULL );
#elif USE_RGB_LED_DRIVER_PWM
  rgb_led_log("Unimplemented");
#else
#error LED driver function is not defined in platform.h
#endif
  
}

开发者ID:MrZANE42，项目名称:WiFiMCU，代码行数:12，代码来源:rgb_led_platform.c

示例8: init_platform_bootloader

void init_platform_bootloader( void )
{
  OSStatus err = kNoErr;
  
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);
}

开发者ID:hujg，项目名称:mico_v2.2.0，代码行数:12，代码来源:platform.c

示例9: init_platform_bootloader

void init_platform_bootloader( void )
{
  MicoGpioInitialize( MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputHigh( MICO_SYS_LED );
  MicoGpioInitialize( MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( MICO_RF_LED );
  
  MicoGpioInitialize(BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize(MFG_SEL, INPUT_PULL_UP);
  
#if defined ( USE_MICO_SPI_FLASH )
  MicoFlashInitialize( MICO_SPI_FLASH );
#endif
}

开发者ID:hujg，项目名称:mico_v2.2.0，代码行数:14，代码来源:platform.c

示例10: init_platform

void init_platform( void )
{
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);
  
  //  Initialise EasyLink buttons
  MicoGpioInitialize( (mico_gpio_t)EasyLink_BUTTON, INPUT_PULL_UP );
  mico_init_timer(&_button_EL_timer, RestoreDefault_TimeOut, _button_EL_Timeout_handler, NULL);
  MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_BOTH_EDGES, _button_EL_irq_handler, NULL );
}

开发者ID:HargicStudio，项目名称:SmartCup_MiCOKit_v2.4.0.0，代码行数:15，代码来源:platform.c

示例11: init_platform

void init_platform( void )
{
  MicoGpioInitialize( MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputHigh( MICO_SYS_LED );
  MicoGpioInitialize( MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( MICO_RF_LED );
//  
  //  Initialise EasyLink buttons
  MicoGpioInitialize( EasyLink_BUTTON, INPUT_PULL_UP );
  mico_init_timer(&_button_EL_timer, RestoreDefault_TimeOut, _button_EL_Timeout_handler, NULL);
  MicoGpioEnableIRQ( EasyLink_BUTTON, IRQ_TRIGGER_FALLING_EDGE, _button_EL_irq_handler, NULL );

#if defined ( USE_MICO_SPI_FLASH )
  MicoFlashInitialize( MICO_SPI_FLASH );
#endif
}

开发者ID:hujg，项目名称:mico_v2.2.0，代码行数:16，代码来源:platform.c

示例12: rgb_led_init

/*------------------------------- user interfaces ----------------------------*/
void rgb_led_init(void)
{
#ifndef RGB_LED_USE_I2C
  
  MicoGpioInitialize( (mico_gpio_t)RGB_LED_CIN, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioInitialize( (mico_gpio_t)RGB_LED_DIN, OUTPUT_OPEN_DRAIN_NO_PULL );
  
#else
  
  // just use i2c sck && sda to send data to control p9813
  OSStatus err = kUnknownErr;
  err = MicoI2cInitialize(&p9813_i2c_device);
  //require_noerr_action( err, exit, bme280_log("ERROR: MicoI2cInitialize err = %d.", err) );
  
#endif
}

开发者ID:wangeshen，项目名称:MICO，代码行数:17，代码来源:p9813.c

示例13: platform_reset_wlan_powersave_clock

static OSStatus platform_reset_wlan_powersave_clock( void )
{
    /* Tie the pin to ground */
    MicoGpioInitialize( (mico_gpio_t) MICO_GPIO_WLAN_POWERSAVE_CLOCK, OUTPUT_PUSH_PULL );
    MicoGpioOutputLow( (mico_gpio_t) MICO_GPIO_WLAN_POWERSAVE_CLOCK );
    return kNoErr;
}

开发者ID:diegoaugustus，项目名称:MICO，代码行数:7，代码来源:wlan_platform.c

示例14: init_platform_bootloader

void init_platform_bootloader( void )
{
  MicoGpioInitialize( MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputHigh( MICO_SYS_LED );
  MicoGpioInitialize( MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( MICO_RF_LED );
  
  MicoGpioInitialize(BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize(MFG_SEL, INPUT_PULL_UP);

#ifdef USE_MiCOKit_EXT
  MicoGpioInitialize( Arduino_D9, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( Arduino_D9 );
#endif
  
}

开发者ID:robbie-cao，项目名称:MiCO，代码行数:16，代码来源:platform.c

示例15: init_platform

void init_platform( void )
{
  button_init_t init;
  
  MicoGpioInitialize( MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputHigh( MICO_SYS_LED );
  MicoGpioInitialize( MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( MICO_RF_LED );
  
  //Initialise EasyLink buttons
  init.gpio = EasyLink_BUTTON;
  init.pressed_func = PlatformEasyLinkButtonClickedCallback;
  init.long_pressed_func = PlatformEasyLinkButtonLongPressedCallback;
  init.long_pressed_timeout = 5000;

  button_init( IOBUTTON_EASYLINK, init );
}

开发者ID:robbie-cao，项目名称:MiCO，代码行数:17，代码来源:platform.c

示例16: init_platform

void init_platform( void )
{
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoSysLed(false);
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_PUSH_PULL );
  MicoRfLed(false);
  
  //  Initialise EasyLink buttons
  //MicoGpioInitialize( (mico_gpio_t)EasyLink_BUTTON, INPUT_PULL_UP );
  //mico_init_timer(&_button_EL_timer, RestoreDefault_TimeOut, _button_EL_Timeout_handler, NULL);
  //MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_FALLING_EDGE, _button_EL_irq_handler, NULL );
//  
//  //  Initialise Standby/wakeup switcher
//  MicoGpioInitialize( Standby_SEL, INPUT_PULL_UP );
//  MicoGpioEnableIRQ( Standby_SEL , IRQ_TRIGGER_FALLING_EDGE, _button_STANDBY_irq_handler, NULL);

}

开发者ID:287631983，项目名称:MICO，代码行数:17，代码来源:platform.c

示例17: init_platform

void init_platform( void )
{
    MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
    MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
    MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
    MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );

    //  Initialise EasyLink buttons
    MicoGpioInitialize( (mico_gpio_t)EasyLink_BUTTON, INPUT_HIGH_IMPEDANCE );
    mico_init_timer(&_button_EL_timer, RestoreDefault_TimeOut, _button_EL_Timeout_handler, NULL);
    MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_BOTH_EDGES, _button_EL_irq_handler, NULL );

#ifdef USE_MiCOKit_EXT
    dc_motor_init( );
    dc_motor_set( 0 );
#endif
}

开发者ID:EmuxEvans，项目名称:SDK_MiCOKit_v2.3.0.2，代码行数:17，代码来源:platform.c

示例18: VS_Init

//初始化VS10XX的IO口	 
void  VS_Init(void)
{

    #ifdef USE_MICO_SPI2
    if ( kNoErr != MicoSpiInitialize( &mico_spi_VS10XX) )
    {
        /*@[email protected]*/ /* Lint: failed - do not define platform peripheral */
        return;
        /*@[email protected]*/
    }
    #else
    MicoGpioInitialize((mico_gpio_t)VS_SO_PIN,  INPUT_PULL_UP);
    MicoGpioInitialize( (mico_gpio_t)VS_SI_PIN,   OUTPUT_PUSH_PULL );
    MicoGpioInitialize( (mico_gpio_t)VS_SCK_PIN,  OUTPUT_PUSH_PULL );
    #endif
    
    MicoGpioInitialize((mico_gpio_t)VS_DQ_PIN,  INPUT_PULL_UP);
    MicoGpioInitialize( (mico_gpio_t)VS_RST_PIN, OUTPUT_PUSH_PULL );
    MicoGpioInitialize( (mico_gpio_t)VS_XCS_PIN, OUTPUT_PUSH_PULL );
    MicoGpioInitialize( (mico_gpio_t)VS_XDCS_PIN, OUTPUT_PUSH_PULL );
    


    return;
}

开发者ID:HargicStudio，项目名称:smartCup_micokit_V2.3.0.2，代码行数:26，代码来源:vs10xx.c

示例19: init_platform_bootloader

void init_platform_bootloader( void )
{
    MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
    MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
    MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
    MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );

    MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
    MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_HIGH_IMPEDANCE);

#ifdef USE_MiCOKit_EXT
    dc_motor_init( );
    dc_motor_set( 0 );

    rgb_led_init();
    rgb_led_open(0, 0, 0);
#endif
}

开发者ID:EmuxEvans，项目名称:SDK_MiCOKit_v2.3.0.2，代码行数:18，代码来源:platform.c

示例20: KEY_Init

//按键初始化函数 
void KEY_Init( mico_gpio_irq_handler_t handler)
{
     MicoGpioInitialize((mico_gpio_t)KEY_PIN,  INPUT_HIGH_IMPEDANCE);
     if (handler  != NULL)
     {
            MicoGpioEnableIRQ( (mico_gpio_t)KEY_PIN, IRQ_TRIGGER_BOTH_EDGES, handler, NULL );
     }

}

开发者ID:HargicStudio，项目名称:smartCup_micokit_V2.3.0.2，代码行数:10，代码来源:key.c

注：本文中的MicoGpioInitialize函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MicoGpioInputGet函数代码示例发布时间：2022-05-30

C++ Mfree函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18213|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9656|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8168|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8418|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8403|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ MicoGpioInitialize函数代码示例

示例1: init_platform

示例2: init_platform

示例3: PinInitForUsart

示例4: host_enable_oob_interrupt

示例5: init_platform_bootloader

示例6: host_platform_deinit

示例7: rgb_led_init

示例8: init_platform_bootloader

示例9: init_platform_bootloader

示例10: init_platform

示例11: init_platform

示例12: rgb_led_init

示例13: platform_reset_wlan_powersave_clock

示例14: init_platform_bootloader

示例15: init_platform

示例16: init_platform

示例17: init_platform

示例18: VS_Init

示例19: init_platform_bootloader

示例20: KEY_Init

请发表评论

全部评论

上一篇：

下一篇：

OsbertWang/install-latex-guide-zh-cn: 一

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053