C++ MicoGpioOutputLow函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中MicoGpioOutputLow函数的典型用法代码示例。如果您正苦于以下问题：C++ MicoGpioOutputLow函数的具体用法？C++ MicoGpioOutputLow怎么用？C++ MicoGpioOutputLow使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了MicoGpioOutputLow函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: mico_system_delegate_config_success

void mico_system_delegate_config_success( mico_config_source_t source )
{
  config_delegate_log_trace();
#ifdef USE_MiCOKit_EXT
  char oled_show_line[OLED_DISPLAY_MAX_CHAR_PER_ROW+1] = {'\0'};
#endif
  
  config_delegate_log( "Wi-Fi configed by: %d", source );

  MicoGpioOutputLow((mico_gpio_t)MICO_SYS_LED);  
  
#ifdef USE_MiCOKit_EXT
  memset(oled_show_line, '\0', OLED_DISPLAY_MAX_CHAR_PER_ROW+1);
  if(CONFIG_BY_AIRKISS == source){
    snprintf(oled_show_line, OLED_DISPLAY_MAX_CHAR_PER_ROW+1, "%s", (uint8_t*)"Airkiss success ");
  }else if(CONFIG_BY_SOFT_AP == source){
    snprintf(oled_show_line, OLED_DISPLAY_MAX_CHAR_PER_ROW+1, "%s", (uint8_t*)"SoftAP success  ");
  }else if(CONFIG_BY_WAC == source){
    snprintf(oled_show_line, OLED_DISPLAY_MAX_CHAR_PER_ROW+1, "%s", (uint8_t*)"WAC success     ");
  }else if( (CONFIG_BY_EASYLINK_V2 == source) || (CONFIG_BY_EASYLINK_PLUS == source) || 
           (CONFIG_BY_EASYLINK_MINUS == source) ){
    snprintf(oled_show_line, OLED_DISPLAY_MAX_CHAR_PER_ROW+1, "%s", (uint8_t*)"Easylink success");
  }else{
    snprintf(oled_show_line, OLED_DISPLAY_MAX_CHAR_PER_ROW+1, "%s", (uint8_t*)"Unknown         ");
  }
  OLED_ShowString(OLED_DISPLAY_COLUMN_START, OLED_DISPLAY_ROW_2, (uint8_t*)oled_show_line);
  OLED_ShowString(OLED_DISPLAY_COLUMN_START, OLED_DISPLAY_ROW_3, (uint8_t*)"                ");
  OLED_ShowString(OLED_DISPLAY_COLUMN_START, OLED_DISPLAY_ROW_4, (uint8_t*)"                ");
#endif
  
  return;
}

开发者ID:brucehelen，项目名称:MICO3288，代码行数:32，代码来源:MICOConfigDelegate.c

示例2: init_platform

void init_platform( void )
{
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
 // MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  //MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);
  
  //  Initialise EasyLink buttons
  MicoGpioInitialize( (mico_gpio_t)EasyLink_BUTTON, INPUT_PULL_UP );
  mico_init_timer(&_button_EL_timer, RestoreDefault_TimeOut, _button_EL_Timeout_handler, NULL);
  MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_BOTH_EDGES, _button_EL_irq_handler, NULL );

  //MicoFlashInitialize( MICO_SPI_FLASH );
  
#ifdef USE_MiCOKit_EXT
  dc_motor_init( );
  dc_motor_set( 0 );
  
  rgb_led_init();
  rgb_led_open(0, 0, 0);
#endif
}

开发者ID:hujg，项目名称:smartCup_micokit_V2.3.0.2，代码行数:25，代码来源:platform.c

示例3: platform_reset_wlan_powersave_clock

static OSStatus platform_reset_wlan_powersave_clock( void )
{
    /* Tie the pin to ground */
    MicoGpioInitialize( (mico_gpio_t) MICO_GPIO_WLAN_POWERSAVE_CLOCK, OUTPUT_PUSH_PULL );
    MicoGpioOutputLow( (mico_gpio_t) MICO_GPIO_WLAN_POWERSAVE_CLOCK );
    return kNoErr;
}

开发者ID:diegoaugustus，项目名称:MICO，代码行数:7，代码来源:wlan_platform.c

示例4: init_platform

void init_platform( void )
{
  button_init_t init;

  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);

  init.gpio = EasyLink_BUTTON;
  init.pressed_func = PlatformEasyLinkButtonClickedCallback;
  init.long_pressed_func = PlatformEasyLinkButtonLongPressedCallback;
  init.long_pressed_timeout = 5000;

  button_init( IOBUTTON_EASYLINK, init );
  
#ifdef USE_MiCOKit_EXT
  dc_motor_init( );
  dc_motor_set( 0 );
  
  rgb_led_init();
  rgb_led_open(0, 0, 0);
#endif
}

开发者ID:OfficeKit，项目名称:OfficeKit_Embed_MiCO，代码行数:27，代码来源:platform.c

示例5: setLightState_command

void setLightState_command(char *property, mico_Context_t * const inContext)
{
  if(0==strcmp(property, "light 0")){
    MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  }else if(0==strcmp(property, "light 1")){
    MicoGpioOutputHigh( (mico_gpio_t)MICO_SYS_LED );
  }
}

开发者ID:HargicStudio，项目名称:SmartCup_MiCOKit_v2.4.0.0，代码行数:8，代码来源:acaapp.c

示例6: MicoRfLed

void MicoRfLed(bool onoff)
{
    if (onoff) {
        MicoGpioOutputLow( (mico_gpio_t)MICO_RF_LED );
    } else {
        MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
    }
}

开发者ID:ChinaAmada，项目名称:MICO，代码行数:8，代码来源:platform.c

示例7: ResetF411

void ResetF411(void)
{
    MicoGpioOutputLow(F411_RESET_PIN);
    mico_thread_msleep(100);
    MicoGpioOutputHigh(F411_RESET_PIN);
    mico_thread_msleep(100);

    AaSysLogPrint(LOGLEVEL_INF, "f411 rest done");
}

开发者ID:HargicStudio，项目名称:SmartCup_MiCOKit_v2.4.0.0，代码行数:9，代码来源:controllerBus.c

示例8: init_platform_bootloader

void init_platform_bootloader( void )
{
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_HIGH_IMPEDANCE);
}

开发者ID:JACK847070222，项目名称:MICO，代码行数:10，代码来源:platform.c

示例9: ConfigWillStop

void ConfigWillStop( mico_Context_t * const inContext )
{
  (void)(inContext); 
  config_delegate_log_trace();

  mico_stop_timer(&_Led_EL_timer);
  mico_deinit_timer( &_Led_EL_timer );
  MicoGpioOutputLow((mico_gpio_t)MICO_SYS_LED);
  return;
}

开发者ID:hujg，项目名称:mico_v2.2.0，代码行数:10，代码来源:MICOConfigDelegate.c

示例10: host_platform_reset_wifi

void host_platform_reset_wifi( bool reset_asserted )
{
  if ( reset_asserted == true )
  {
    MicoGpioOutputLow( (mico_gpio_t)WL_RESET );  
  }
  else
  {
    MicoGpioOutputHigh( (mico_gpio_t)WL_RESET ); 
  }
}

开发者ID:ChinaAmada，项目名称:MICO，代码行数:11，代码来源:platform.c

示例11: host_platform_power_wifi

void host_platform_power_wifi( bool power_enabled )
{
  if ( power_enabled == true )
  {
    MicoGpioOutputLow( (mico_gpio_t)WL_REG );
  }
  else
  {
    MicoGpioOutputHigh( (mico_gpio_t)WL_REG ); 
  }
}

开发者ID:ChinaAmada，项目名称:MICO，代码行数:11，代码来源:platform.c

示例12: init_platform_bootloader

void init_platform_bootloader( void )
{
  OSStatus err = kNoErr;
  
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);
}

开发者ID:hujg，项目名称:mico_v2.2.0，代码行数:12，代码来源:platform.c

示例13: init_platform

void init_platform( void )
{
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);
  
  //  Initialise EasyLink buttons
  MicoGpioInitialize( (mico_gpio_t)EasyLink_BUTTON, INPUT_PULL_UP );
  mico_init_timer(&_button_EL_timer, RestoreDefault_TimeOut, _button_EL_Timeout_handler, NULL);
  MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_BOTH_EDGES, _button_EL_irq_handler, NULL );
}

开发者ID:HargicStudio，项目名称:SmartCup_MiCOKit_v2.4.0.0，代码行数:15，代码来源:platform.c

示例14: init_platform_bootloader

void init_platform_bootloader( void )
{
  MicoGpioInitialize( MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputHigh( MICO_SYS_LED );
  MicoGpioInitialize( MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( MICO_RF_LED );
  
  MicoGpioInitialize(BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize(MFG_SEL, INPUT_PULL_UP);

#ifdef USE_MiCOKit_EXT
  MicoGpioInitialize( Arduino_D9, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( Arduino_D9 );
#endif
  
}

开发者ID:robbie-cao，项目名称:MiCO，代码行数:16，代码来源:platform.c

示例15: init_platform

void init_platform( void )
{
    MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
    MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
    MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
    MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );

    //  Initialise EasyLink buttons
    MicoGpioInitialize( (mico_gpio_t)EasyLink_BUTTON, INPUT_HIGH_IMPEDANCE );
    mico_init_timer(&_button_EL_timer, RestoreDefault_TimeOut, _button_EL_Timeout_handler, NULL);
    MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_BOTH_EDGES, _button_EL_irq_handler, NULL );

#ifdef USE_MiCOKit_EXT
    dc_motor_init( );
    dc_motor_set( 0 );
#endif
}

开发者ID:EmuxEvans，项目名称:SDK_MiCOKit_v2.3.0.2，代码行数:17，代码来源:platform.c

示例16: init_platform

void init_platform( void )
{
   MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
   MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
   MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
   MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
   //  Initialise EasyLink buttons
   MicoGpioInitialize( (mico_gpio_t)EasyLink_BUTTON, INPUT_PULL_UP );
   mico_init_timer(&_button_EL_timer, RestoreDefault_TimeOut, _button_EL_Timeout_handler, NULL);
   MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_BOTH_EDGES, _button_EL_irq_handler, NULL );
  
   //  Initialise Standby/wakeup switcher
   MicoGpioInitialize( (mico_gpio_t)Standby_SEL, INPUT_PULL_UP );
   MicoGpioEnableIRQ( (mico_gpio_t)Standby_SEL , IRQ_TRIGGER_FALLING_EDGE, _button_STANDBY_irq_handler, NULL);

   MicoFlashInitialize( MICO_SPI_FLASH );
}

开发者ID:JACK847070222，项目名称:MICO，代码行数:18，代码来源:platform.c

示例17: init_platform_bootloader

void init_platform_bootloader( void )
{
    MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
    MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
    MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
    MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );

    MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
    MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_HIGH_IMPEDANCE);

#ifdef USE_MiCOKit_EXT
    dc_motor_init( );
    dc_motor_set( 0 );

    rgb_led_init();
    rgb_led_open(0, 0, 0);
#endif
}

开发者ID:EmuxEvans，项目名称:SDK_MiCOKit_v2.3.0.2，代码行数:18，代码来源:platform.c

示例18: ConfigWillStop

void ConfigWillStop( mico_Context_t * const inContext )
{
  (void)(inContext); 
  config_delegate_log_trace();
#ifdef USE_MiCOKit_EXT
  char oled_show_line[OLED_DISPLAY_MAX_CHAR_PER_ROW+1] = {'\0'};
#endif

  mico_stop_timer(&_Led_EL_timer);
  mico_deinit_timer( &_Led_EL_timer );
  MicoGpioOutputLow((mico_gpio_t)MICO_SYS_LED);
#ifdef USE_MiCOKit_EXT
  memset(oled_show_line, '\0', OLED_DISPLAY_MAX_CHAR_PER_ROW+1);
  snprintf(oled_show_line, OLED_DISPLAY_MAX_CHAR_PER_ROW+1, "%s", (uint8_t*)"Config          ");
  OLED_ShowString(OLED_DISPLAY_COLUMN_START, OLED_DISPLAY_ROW_2, (uint8_t*)oled_show_line);
  OLED_ShowString(OLED_DISPLAY_COLUMN_START, OLED_DISPLAY_ROW_3, "    Stop.       ");
  OLED_ShowString(OLED_DISPLAY_COLUMN_START, OLED_DISPLAY_ROW_4, "                ");
#endif
  return;
}

开发者ID:liquanqing，项目名称:RGBLED_Text，代码行数:20，代码来源:MICOConfigDelegate.c

示例19: _button_EL_irq_handler

static void _button_EL_irq_handler( void* arg )
{
  (void)(arg);
  int interval = -1;

  mico_start_timer(&_button_EL_timer);
  
  if ( MicoGpioInputGet( (mico_gpio_t)EasyLink_BUTTON ) == 0 ) {
    _default_start_time = mico_get_time()+1;
    mico_start_timer(&_button_EL_timer);
    MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_RISING_EDGE, _button_EL_irq_handler, NULL );
  } else {
    interval = mico_get_time() + 1 - _default_start_time;
    if ( (_default_start_time != 0) && interval > 50 && interval < RestoreDefault_TimeOut){
      /* EasyLink button clicked once */
      PlatformEasyLinkButtonClickedCallback();
      //platform_log("PlatformEasyLinkButtonClickedCallback!");
      MicoGpioOutputLow( (mico_gpio_t)MICO_RF_LED );
      MicoGpioEnableIRQ( (mico_gpio_t)EasyLink_BUTTON, IRQ_TRIGGER_FALLING_EDGE, _button_EL_irq_handler, NULL );
   }
   mico_stop_timer(&_button_EL_timer);
   _default_start_time = 0;
  }
}

开发者ID:287631983，项目名称:MICO，代码行数:24，代码来源:platform.c

示例20: init_platform_bootloader

void init_platform_bootloader( void )
{
  OSStatus err = kNoErr;
  
  MicoGpioInitialize( (mico_gpio_t)MICO_SYS_LED, OUTPUT_PUSH_PULL );
  MicoGpioOutputLow( (mico_gpio_t)MICO_SYS_LED );
  MicoGpioInitialize( (mico_gpio_t)MICO_RF_LED, OUTPUT_OPEN_DRAIN_NO_PULL );
  MicoGpioOutputHigh( (mico_gpio_t)MICO_RF_LED );
  
  MicoGpioInitialize((mico_gpio_t)BOOT_SEL, INPUT_PULL_UP);
  MicoGpioInitialize((mico_gpio_t)MFG_SEL, INPUT_PULL_UP);
  
  /* Specific operations used in EMW3165 production */
#define NEED_RF_DRIVER_COPY_BASE    ((uint32_t)0x08008000)
#define TEMP_RF_DRIVER_BASE         ((uint32_t)0x08040000)
#define TEMP_RF_DRIVER_END          ((uint32_t)0x0807FFFF)
  
  const uint8_t isDriverNeedCopy = *(uint8_t *)(NEED_RF_DRIVER_COPY_BASE);
  const uint32_t totalLength = ( DRIVER_FLASH_SIZE < 0x40000)?  DRIVER_FLASH_SIZE:0x40000;
  const uint8_t crcResult = *(uint8_t *)(TEMP_RF_DRIVER_END);
  uint8_t targetCrcResult = 0;
  
  uint32_t copyLength;
  uint32_t destStartAddress_tmp = DRIVER_START_ADDRESS;
  uint32_t sourceStartAddress_tmp = TEMP_RF_DRIVER_BASE;
  uint32_t i;
  
  if ( isDriverNeedCopy != 0x0 )
    return;
  
  platform_log( "Bootloader start to copy RF driver..." );
  /* Copy RF driver to SPI flash */
  err = MicoFlashInitialize( (mico_flash_t)MICO_FLASH_FOR_DRIVER );
  require_noerr(err, exit);
  err = MicoFlashInitialize( (mico_flash_t)MICO_INTERNAL_FLASH );
  require_noerr(err, exit);
  err = MicoFlashErase( MICO_FLASH_FOR_DRIVER, DRIVER_START_ADDRESS, DRIVER_END_ADDRESS );
  require_noerr(err, exit);
  platform_log( "Time: %d", mico_get_time_no_os() );
  
  for(i = 0; i <= totalLength/SizePerRW; i++){
    if( i == totalLength/SizePerRW ){
      if(totalLength%SizePerRW)
        copyLength = totalLength%SizePerRW;
      else
        break;
    }else{
      copyLength = SizePerRW;
    }
    printf(".");
    err = MicoFlashRead( MICO_INTERNAL_FLASH, &sourceStartAddress_tmp, data , copyLength );
    require_noerr( err, exit );
    err = MicoFlashWrite( MICO_FLASH_FOR_DRIVER, &destStartAddress_tmp, data, copyLength);
    require_noerr(err, exit);
  }
  
  printf("\r\n");
  /* Check CRC-8 check-sum */
  platform_log( "Bootloader start to verify RF driver..." );
  sourceStartAddress_tmp = TEMP_RF_DRIVER_BASE;
  destStartAddress_tmp = DRIVER_START_ADDRESS;
  
  for(i = 0; i <= totalLength/SizePerRW; i++){
    if( i == totalLength/SizePerRW ){
      if(totalLength%SizePerRW)
        copyLength = totalLength%SizePerRW;
      else
        break;
    }else{
      copyLength = SizePerRW;
    }
    printf(".");
    err = MicoFlashRead( MICO_FLASH_FOR_DRIVER, &destStartAddress_tmp, data, copyLength );
    require_noerr( err, exit );
    
    targetCrcResult = CRC8_Table(targetCrcResult, data, copyLength);
  }
  
  printf("\r\n");
  //require_string( crcResult == targetCrcResult, exit, "Check-sum error" ); 
  if( crcResult != targetCrcResult ){
    platform_log("Check-sum error");
    while(1);
  }
  /* Clear RF driver from temperary storage */
  platform_log("Bootloader start to clear RF driver temporary storage...");
  
  err = MicoFlashInitialize( (mico_flash_t)MICO_INTERNAL_FLASH );
  require_noerr(err, exit);  
  
  /* Clear copy tag */
  err = MicoFlashErase(MICO_INTERNAL_FLASH, NEED_RF_DRIVER_COPY_BASE, NEED_RF_DRIVER_COPY_BASE);
  require_noerr(err, exit);
  
exit:
  MicoFlashFinalize( MICO_INTERNAL_FLASH );
  MicoFlashFinalize( MICO_FLASH_FOR_DRIVER );
}

开发者ID:etanhua，项目名称:MICO，代码行数:98，代码来源:platform.c

注：本文中的MicoGpioOutputLow函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MicroSecondDelay函数代码示例发布时间：2022-05-30

C++ MicoGpioOutputHigh函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18213|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9656|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8168|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8418|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8403|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ MicoGpioOutputLow函数代码示例

示例1: mico_system_delegate_config_success

示例2: init_platform

示例3: platform_reset_wlan_powersave_clock

示例4: init_platform

示例5: setLightState_command

示例6: MicoRfLed

示例7: ResetF411

示例8: init_platform_bootloader

示例9: ConfigWillStop

示例10: host_platform_reset_wifi

示例11: host_platform_power_wifi

示例12: init_platform_bootloader

示例13: init_platform

示例14: init_platform_bootloader

示例15: init_platform

示例16: init_platform

示例17: init_platform_bootloader

示例18: ConfigWillStop

示例19: _button_EL_irq_handler

示例20: init_platform_bootloader

请发表评论

全部评论

上一篇：

下一篇：

OsbertWang/install-latex-guide-zh-cn: 一

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053