• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ MlmeAllocateMemory函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中MlmeAllocateMemory函数的典型用法代码示例。如果您正苦于以下问题:C++ MlmeAllocateMemory函数的具体用法?C++ MlmeAllocateMemory怎么用?C++ MlmeAllocateMemory使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了MlmeAllocateMemory函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ApCliMlmeAssocReqAction

/*
    ==========================================================================
    Description:
        mlme assoc req handling procedure
    Parameters:
        Adapter - Adapter pointer
        Elem - MLME Queue Element
    Pre:
        the station has been authenticated and the following information is stored in the config
            -# SSID
            -# supported rates and their length
    Post  :
        -# An association request frame is generated and sent to the air
        -# Association timer starts
        -# Association state -> ASSOC_WAIT_RSP
        
    ==========================================================================
 */
static VOID ApCliMlmeAssocReqAction(
	IN PRTMP_ADAPTER pAd, 
	IN MLME_QUEUE_ELEM *Elem) 
{
	NDIS_STATUS		 NStatus;
	BOOLEAN          Cancelled;
	UCHAR            ApAddr[6];
	HEADER_802_11    AssocHdr;
	UCHAR            WmeIe[9] = {IE_VENDOR_SPECIFIC, 0x07, 0x00, 0x50, 0xf2, 0x02, 0x00, 0x01, 0x00};
	USHORT           ListenIntv;
	ULONG            Timeout;
	USHORT           CapabilityInfo;
	PUCHAR           pOutBuffer = NULL;
	ULONG            FrameLen = 0;
	ULONG            tmp;
	UCHAR            SsidIe    = IE_SSID;
	UCHAR            SupRateIe = IE_SUPP_RATES;
	UCHAR            ExtRateIe = IE_EXT_SUPP_RATES;
	APCLI_CTRL_MSG_STRUCT ApCliCtrlMsg;
	USHORT ifIndex = (USHORT)(Elem->Priv);
	PULONG pCurrState = NULL;
	PAPCLI_STRUCT pApCliEntry = NULL;
#ifdef APCLI_WPA_SUPPLICANT_SUPPORT
	USHORT			VarIesOffset = 0;
#endif /* APCLI_WPA_SUPPLICANT_SUPPORT */
	UCHAR RSNIe = IE_WPA;
#ifdef MAC_REPEATER_SUPPORT
	UCHAR CliIdx = 0xFF;
#endif /* MAC_REPEATER_SUPPORT */

	if ((ifIndex >= MAX_APCLI_NUM)
#ifdef MAC_REPEATER_SUPPORT
		&& (ifIndex < 64)
#endif /* MAC_REPEATER_SUPPORT */
		)
		return;

#ifdef MAC_REPEATER_SUPPORT
	if (ifIndex >= 64)
	{
		CliIdx = ((ifIndex - 64) % 16);
		ifIndex = ((ifIndex - 64) / 16);
		pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].RepeaterCli[CliIdx].AssocCurrState;
	}
	else
#endif /* MAC_REPEATER_SUPPORT */
	pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].AssocCurrState;

	pApCliEntry = &pAd->ApCfg.ApCliTab[ifIndex];

	/* Block all authentication request durning WPA block period */
	if (pApCliEntry->bBlockAssoc == TRUE)
	{
		DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - Block Auth request durning WPA block period!\n"));
		*pCurrState = APCLI_ASSOC_IDLE;
		ApCliCtrlMsg.Status = MLME_STATE_MACHINE_REJECT;
		MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_ASSOC_RSP,
			sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
	}
	else if(MlmeAssocReqSanity(pAd, Elem->Msg, Elem->MsgLen, ApAddr, &CapabilityInfo, &Timeout, &ListenIntv))
	{
		//RTMPCancelTimer(&pAd->ApCliMlmeAux.ApCliAssocTimer, &Cancelled);
#ifdef MAC_REPEATER_SUPPORT
		if (CliIdx != 0xFF)
			RTMPCancelTimer(&pAd->ApCfg.ApCliTab[ifIndex].RepeaterCli[CliIdx].ApCliAssocTimer, &Cancelled);
		else
#endif /* MAC_REPEATER_SUPPORT */
		RTMPCancelTimer(&pApCliEntry->ApCliMlmeAux.ApCliAssocTimer, &Cancelled);

		/* allocate and send out AssocRsp frame */
		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  /*Get an unused nonpaged memory */
		if (NStatus != NDIS_STATUS_SUCCESS)
		{
			DBGPRINT(RT_DEBUG_ERROR, ("APCLI_ASSOC - ApCliMlmeAssocReqAction() allocate memory failed \n"));
			*pCurrState = APCLI_ASSOC_IDLE;

			ApCliCtrlMsg.Status = MLME_FAIL_NO_RESOURCE;
			MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_ASSOC_RSP,
				sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);

			return;
		}
//.........这里部分代码省略.........
开发者ID:23171580,项目名称:ralink,代码行数:101,代码来源:apcli_assoc.c


示例2: QBSS_LoadAlarm

/*
========================================================================
Routine Description:
	Handle a alarm.

Arguments:
	pAd					- WLAN control block pointer

Return Value:
	None

Note:
	You can use different methods to handle QBSS Load alarm here.

	Current methods are:
	1. Change 20/40 to 20-only.
	2. Change channel to the clear channel.
========================================================================
*/
static VOID QBSS_LoadAlarm(
 	IN		RTMP_ADAPTER	*pAd)
{
	/* suspend alarm until channel switch */
	QBSS_LoadAlarmSuspend(pAd);

	pAd->QloadAlarmNumber ++;

	/* check if we have already been 20M bandwidth */
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
	if ((pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset != 0) &&
		(pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth != 0))
	{
		MAC_TABLE *pMacTable;
		UINT32 StaId;


		DBGPRINT(RT_DEBUG_TRACE, ("qbss> Alarm! Change to 20 bw...\n"));

		/* disassociate stations without D3 2040Coexistence function */
		pMacTable = &pAd->MacTab;

		for(StaId=1; StaId<MAX_LEN_OF_MAC_TABLE; StaId++)
		{
			MAC_TABLE_ENTRY *pEntry = &pMacTable->Content[StaId];
			BOOLEAN bDisconnectSta = FALSE;

			if (!IS_ENTRY_CLIENT(pEntry))
				continue;
			/* End of if */

			if (pEntry->Sst != SST_ASSOC)
				continue;
			/* End of if */

			if (pEntry->BSS2040CoexistenceMgmtSupport)
				bDisconnectSta = TRUE;
			/* End of if */

			if (bDisconnectSta)
			{
				// send wireless event - for ageout 
				RTMPSendWirelessEvent(pAd, IW_AGEOUT_EVENT_FLAG, pEntry->Addr, 0, 0); 

				{
					PUCHAR      pOutBuffer = NULL;
					NDIS_STATUS NStatus;
					ULONG       FrameLen = 0;
					HEADER_802_11 DeAuthHdr;
					USHORT      Reason;

					//  send out a DISASSOC request frame
					NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
					if (NStatus != NDIS_STATUS_SUCCESS)
					{
						DBGPRINT(RT_DEBUG_TRACE, (" MlmeAllocateMemory fail  ..\n"));
						//NdisReleaseSpinLock(&pAd->MacTabLock);
						continue;
					}

					Reason = REASON_DEAUTH_STA_LEAVING;
					MgtMacHeaderInit(pAd, &DeAuthHdr, SUBTYPE_DEAUTH, 0,
									pEntry->Addr,
									pAd->ApCfg.MBSSID[pEntry->apidx].Bssid);				
			    	MakeOutgoingFrame(pOutBuffer,            &FrameLen, 
			    	                  sizeof(HEADER_802_11), &DeAuthHdr, 
			    	                  2,                     &Reason, 
			    	                  END_OF_ARGS);
			    	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
			    	MlmeFreeMemory(pAd, pOutBuffer);
				}

				DBGPRINT(RT_DEBUG_TRACE, ("qbss> Alarm! Deauth the station "
						"%02x:%02x:%02x:%02x:%02x:%02x\n",
						pEntry->Addr[0], pEntry->Addr[1],
						pEntry->Addr[2], pEntry->Addr[3],
						pEntry->Addr[4], pEntry->Addr[5]));			

				MacTableDeleteEntry(pAd, pEntry->Aid, pEntry->Addr);
				continue;
//.........这里部分代码省略.........
开发者ID:schidler,项目名称:flyzjhz-rt-n56u,代码行数:101,代码来源:ap_qload.c


示例3: ApCliMlmeAssocReqAction

/*
    ==========================================================================
    Description:
        mlme assoc req handling procedure
    Parameters:
        Adapter - Adapter pointer
        Elem - MLME Queue Element
    Pre:
        the station has been authenticated and the following information is stored in the config
            -# SSID
            -# supported rates and their length
    Post  :
        -# An association request frame is generated and sent to the air
        -# Association timer starts
        -# Association state -> ASSOC_WAIT_RSP
        
    ==========================================================================
 */
static VOID ApCliMlmeAssocReqAction(
	IN PRTMP_ADAPTER pAd, 
	IN MLME_QUEUE_ELEM *Elem) 
{
	NDIS_STATUS		 NStatus;
	BOOLEAN          Cancelled;
	UCHAR            ApAddr[6];
	HEADER_802_11    AssocHdr;
	UCHAR            WmeIe[9] = {IE_VENDOR_SPECIFIC, 0x07, 0x00, 0x50, 0xf2, 0x02, 0x00, 0x01, 0x00};
	USHORT           ListenIntv;
	ULONG            Timeout;
	USHORT           CapabilityInfo;
	PUCHAR           pOutBuffer = NULL;
	ULONG            FrameLen = 0;
	ULONG            tmp;
	UCHAR            SsidIe    = IE_SSID;
	UCHAR            SupRateIe = IE_SUPP_RATES;
	UCHAR            ExtRateIe = IE_EXT_SUPP_RATES;
	APCLI_CTRL_MSG_STRUCT ApCliCtrlMsg;
	USHORT ifIndex = (USHORT)(Elem->Priv);
	PULONG pCurrState = NULL;
	UCHAR RSNIe = IE_WPA;
	APCLI_STRUCT *apcli_entry;
	struct wifi_dev *wdev;
#ifdef MAC_REPEATER_SUPPORT
	UCHAR CliIdx = 0xFF;
#endif /* MAC_REPEATER_SUPPORT */

	if ((ifIndex >= MAX_APCLI_NUM)
#ifdef MAC_REPEATER_SUPPORT
		&& (ifIndex < 64)
#endif /* MAC_REPEATER_SUPPORT */
		)
		return;

#ifdef MAC_REPEATER_SUPPORT
	if (ifIndex >= 64)
	{
		CliIdx = ((ifIndex - 64) % 16);
		ifIndex = ((ifIndex - 64) / 16);
		pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].RepeaterCli[CliIdx].AssocCurrState;
	}
	else
#endif /* MAC_REPEATER_SUPPORT */
		pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].AssocCurrState;

	apcli_entry = &pAd->ApCfg.ApCliTab[ifIndex];
	wdev = &apcli_entry->wdev;
		
	/* Block all authentication request durning WPA block period */
	if (apcli_entry->bBlockAssoc == TRUE)
	{
		DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - Block Auth request durning WPA block period!\n"));
		*pCurrState = APCLI_ASSOC_IDLE;
		ApCliCtrlMsg.Status = MLME_STATE_MACHINE_REJECT;
		MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_ASSOC_RSP,
			sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
	}
	else if(MlmeAssocReqSanity(pAd, Elem->Msg, Elem->MsgLen, ApAddr, &CapabilityInfo, &Timeout, &ListenIntv))
	{
		//RTMPCancelTimer(&apcli_entry->MlmeAux.ApCliAssocTimer, &Cancelled);
#ifdef MAC_REPEATER_SUPPORT
		if (CliIdx != 0xFF)
			RTMPCancelTimer(&apcli_entry->RepeaterCli[CliIdx].ApCliAssocTimer, &Cancelled);
		else
#endif /* MAC_REPEATER_SUPPORT */
		RTMPCancelTimer(&apcli_entry->MlmeAux.ApCliAssocTimer, &Cancelled);

		/* allocate and send out AssocRsp frame */
		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  /*Get an unused nonpaged memory */
		if (NStatus != NDIS_STATUS_SUCCESS)
		{
			DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - ApCliMlmeAssocReqAction() allocate memory failed \n"));
			*pCurrState = APCLI_ASSOC_IDLE;

			ApCliCtrlMsg.Status = MLME_FAIL_NO_RESOURCE;
			MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_ASSOC_RSP,
				sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);

			return;
		}

//.........这里部分代码省略.........
开发者ID:jing-git,项目名称:rt-n56u-1,代码行数:101,代码来源:apcli_assoc.c


示例4: ApCliEnqueueProbeRequest

/*
	==========================================================================
	Description:
	==========================================================================
 */
static VOID ApCliEnqueueProbeRequest(
	IN PRTMP_ADAPTER pAd,
	IN UCHAR SsidLen,
	OUT PCHAR Ssid,
	IN USHORT ifIndex)
{
	NDIS_STATUS     NState;
	PUCHAR          pOutBuffer;
	ULONG           FrameLen = 0;
	HEADER_802_11   Hdr80211;
	UCHAR           SsidIe    = IE_SSID;
	UCHAR           SupRateIe = IE_SUPP_RATES;
	UCHAR ssidLen;
	CHAR ssid[MAX_LEN_OF_SSID];
	APCLI_STRUCT *pApCliEntry = NULL;
	BOOLEAN bHasWscIe = FALSE;

	DBGPRINT(RT_DEBUG_TRACE, ("force out a ProbeRequest ...\n"));

	if (ifIndex >= MAX_APCLI_NUM)
		return;

	pApCliEntry = &pAd->ApCfg.ApCliTab[ifIndex];

	NState = MlmeAllocateMemory(pAd, &pOutBuffer);  /* Get an unused nonpaged memory */
	if(NState != NDIS_STATUS_SUCCESS)
	{
		DBGPRINT(RT_DEBUG_TRACE, ("EnqueueProbeRequest() allocate memory fail\n"));
		return;
	}
	else
	{
		if(MAC_ADDR_EQUAL(pAd->ApCfg.ApCliTab[ifIndex].CfgApCliBssid, ZERO_MAC_ADDR))
			ApCliMgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0,
				BROADCAST_ADDR, BROADCAST_ADDR, ifIndex);
		else
			ApCliMgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0,
				pAd->ApCfg.ApCliTab[ifIndex].CfgApCliBssid, pAd->ApCfg.ApCliTab[ifIndex].CfgApCliBssid, ifIndex);

		ssidLen = SsidLen;
		NdisZeroMemory(ssid, MAX_LEN_OF_SSID);
		NdisMoveMemory(ssid, Ssid, ssidLen);

		/* this ProbeRequest explicitly specify SSID to reduce unwanted ProbeResponse */
		MakeOutgoingFrame(pOutBuffer,		&FrameLen,
			sizeof(HEADER_802_11),			&Hdr80211,
			1,								&SsidIe,
			1,								&ssidLen,
			ssidLen,						ssid,
			1,								&SupRateIe,
			1,								&pApCliEntry->MlmeAux.SupRateLen,
			pApCliEntry->MlmeAux.SupRateLen,		pApCliEntry->MlmeAux.SupRate,
			END_OF_ARGS);

		/* Add the extended rate IE */
		if (pApCliEntry->MlmeAux.ExtRateLen != 0)
		{
			ULONG            tmp;

			MakeOutgoingFrame(pOutBuffer + FrameLen,    &tmp,
				1,                        &ExtRateIe,
				1,                        &pApCliEntry->MlmeAux.ExtRateLen,
				pApCliEntry->MlmeAux.ExtRateLen,  pApCliEntry->MlmeAux.ExtRate,
				END_OF_ARGS);
			FrameLen += tmp;
		}

#ifdef DOT11_VHT_AC
		if (WMODE_CAP_AC(pAd->CommonCfg.PhyMode) &&
			(pAd->CommonCfg.Channel > 14))
		{
			build_vht_cap_ie(pAd, (UCHAR *)&pApCliEntry->MlmeAux.vht_cap);
			pApCliEntry->MlmeAux.vht_cap_len = sizeof(VHT_CAP_IE);
			FrameLen += build_vht_ies(pAd, (UCHAR *)(pOutBuffer + FrameLen), SUBTYPE_PROBE_REQ);
		}
#endif /* DOT11_VHT_AC */
#ifdef RT_CFG80211_P2P_CONCURRENT_DEVICE
		if ((pAd->StaCfg.wpa_supplicant_info.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) &&
			(pAd->cfg80211_ctrl.ExtraIeLen != 0))
		{
				ULONG ExtraIeTmpLen = 0;

				MakeOutgoingFrame(pOutBuffer + FrameLen,			  &ExtraIeTmpLen,
								  pAd->cfg80211_ctrl.ExtraIeLen,   pAd->cfg80211_ctrl.pExtraIe,
								  END_OF_ARGS);

				FrameLen += ExtraIeTmpLen;
		}
#endif /* RT_CFG80211_P2P_CONCURRENT_DEVICE*/

		MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
		MlmeFreeMemory(pAd, pOutBuffer);
	}

	return;
//.........这里部分代码省略.........
开发者ID:mickeyreg,项目名称:driver,代码行数:101,代码来源:apcli_sync.c


示例5: APPeerProbeReqAction

/*
	==========================================================================
	Description:
		Process the received ProbeRequest from clients
	Parameters:
		Elem - msg containing the ProbeReq frame
	==========================================================================
 */
VOID APPeerProbeReqAction(
	IN PRTMP_ADAPTER pAd,
	IN MLME_QUEUE_ELEM *Elem)
{
	UCHAR         Addr2[MAC_ADDR_LEN];
	CHAR          Ssid[MAX_LEN_OF_SSID];
	UCHAR         SsidLen;
	HEADER_802_11 ProbeRspHdr;
	NDIS_STATUS   NStatus;
	PUCHAR        pOutBuffer = NULL;
	ULONG         FrameLen = 0, TmpLen;
	LARGE_INTEGER FakeTimestamp;
	UCHAR         DsLen = 1;
	UCHAR   ErpIeLen = 1;
	UCHAR         apidx = 0, PhyMode, SupRateLen;
	UCHAR   RSNIe=IE_WPA, RSNIe2=IE_WPA2;
	BOOLEAN		bRequestRssi=FALSE;

#ifdef WSC_AP_SUPPORT
    UCHAR		  Addr3[MAC_ADDR_LEN];
    PFRAME_802_11 pFrame = (PFRAME_802_11)Elem->Msg;

	COPY_MAC_ADDR(Addr3, pFrame->Hdr.Addr3);
#endif /* WSC_AP_SUPPORT */

#ifdef WDS_SUPPORT
	/* if in bridge mode, no need to reply probe req. */
	if (pAd->WdsTab.Mode == WDS_BRIDGE_MODE)
		return;
#endif /* WDS_SUPPORT */
	
	if (! PeerProbeReqSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, Ssid, &SsidLen, &bRequestRssi))
		return;

	for(apidx=0; apidx<pAd->ApCfg.BssidNum; apidx++)
	{
		RSNIe = IE_WPA;
	
		if ((pAd->ApCfg.MBSSID[apidx].MSSIDDev != NULL) &&
			!(RTMP_OS_NETDEV_STATE_RUNNING(pAd->ApCfg.MBSSID[apidx].MSSIDDev)))
		{
			/* the interface is down, so we can not send probe response */
			continue;
		}

		PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;

		if (((SsidLen == 0) && (! pAd->ApCfg.MBSSID[apidx].bHideSsid)) ||
#ifdef WSC_AP_SUPPORT
            /* buffalo WPS testbed STA send ProbrRequest ssid length = 32 and ssid are not AP , but DA are AP. for WPS test send ProbeResponse */
			((SsidLen == 32) && MAC_ADDR_EQUAL(Addr3, pAd->ApCfg.MBSSID[apidx].Bssid) && (pAd->ApCfg.MBSSID[apidx].bHideSsid == 0)) ||
#endif /* WSC_AP_SUPPORT */
		((SsidLen == pAd->ApCfg.MBSSID[apidx].SsidLen) && NdisEqualMemory(Ssid, pAd->ApCfg.MBSSID[apidx].Ssid, (ULONG) SsidLen)))
			;
		else
			continue; /* check next BSS */


#ifdef RT_CFG80211_SUPPORT
		if (pAd->Cfg80211RegisterProbeReqFrame)
		{
			UINT32 freq;
			MAP_CHANNEL_ID_TO_KHZ(Elem->Channel, freq);
			freq /= 1000;
			CFG80211OS_RxMgmt(pAd->ApCfg.MBSSID[apidx].MSSIDDev, freq, (PUCHAR)Elem->Msg, Elem->MsgLen);
		}
#endif /* RT_CFG80211_SUPPORT */

#ifdef BAND_STEERING
	BND_STRG_CHECK_CONNECTION_REQ(	pAd,
										NULL, 
										Addr2,
										Elem->MsgType,
										Elem->Rssi0,
										Elem->Rssi1,
										Elem->Rssi2,
										NULL);
#endif /* BAND_STEERING */

		/* allocate and send out ProbeRsp frame */
		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
		if (NStatus != NDIS_STATUS_SUCCESS)
			return;
		MgtMacHeaderInit(pAd, &ProbeRspHdr, SUBTYPE_PROBE_RSP, 0, Addr2, 
							pAd->ApCfg.MBSSID[apidx].Bssid);

		 if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA) ||
			(pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPAPSK))
			RSNIe = IE_WPA;
		else if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2) ||
			(pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2PSK))
			RSNIe = IE_WPA2;
//.........这里部分代码省略.........
开发者ID:jing-git,项目名称:rt-n56u-1,代码行数:101,代码来源:ap_sync.c


示例6: ApCliPeerAuthRspAtSeq2Action


//.........这里部分代码省略.........
			else
#endif /* MAC_REPEATER_SUPPORT */
			{
				DBGPRINT(RT_DEBUG_TRACE, ("APCLI AUTH - Receive AUTH_RSP seq#2 to me (Alg=%d, Status=%d)\n", Alg, Status));
				RTMPCancelTimer(&pAd->ApCfg.ApCliTab[ifIndex].ApCliMlmeAux.ApCliAuthTimer, &Cancelled);
			}

			if(Status == MLME_SUCCESS)
			{
				if(pAd->ApCfg.ApCliTab[ifIndex].ApCliMlmeAux.Alg == Ndis802_11AuthModeOpen)
				{
					*pCurrState = APCLI_AUTH_REQ_IDLE;

					ApCliCtrlMsg.Status= MLME_SUCCESS;
#ifdef MAC_REPEATER_SUPPORT
					ApCliCtrlMsg.CliIdx = CliIdx;
					ApCliCtrlMsg.BssIdx = ifIndex;
					ifIndex = (USHORT)(Elem->Priv);
#endif /* MAC_REPEATER_SUPPORT */
					MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_AUTH_RSP,
						sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
				} 
				else
				{
					PCIPHER_KEY  pKey;	
					UINT	default_key = pAd->ApCfg.ApCliTab[ifIndex].DefaultKeyId;

					pKey = &pAd->ApCfg.ApCliTab[ifIndex].SharedKey[default_key];

					/* 2. shared key, need to be challenged */
					Seq++;
					RemoteStatus = MLME_SUCCESS;
					/* allocate and send out AuthRsp frame */
					NState = MlmeAllocateMemory(pAd, &pOutBuffer); 					
					if(NState != NDIS_STATUS_SUCCESS)
					{
						DBGPRINT(RT_DEBUG_TRACE, ("AUTH - ApCliPeerAuthRspAtSeq2Action allocate memory fail\n"));
						*pCurrState = APCLI_AUTH_REQ_IDLE;

						ApCliCtrlMsg.Status= MLME_FAIL_NO_RESOURCE;
#ifdef MAC_REPEATER_SUPPORT
						ApCliCtrlMsg.CliIdx = CliIdx;
						ApCliCtrlMsg.BssIdx = ifIndex;
						ifIndex = (USHORT)(Elem->Priv);
#endif /* MAC_REPEATER_SUPPORT */
						MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_AUTH_RSP,
							sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
						goto LabelOK;
					}

#ifdef MAC_REPEATER_SUPPORT
					if (CliIdx != 0xFF)
						DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Repeater Cli Send AUTH request seq#3...\n"));
					else
#endif /* MAC_REPEATER_SUPPORT */
					DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Send AUTH request seq#3...\n"));
					ApCliMgtMacHeaderInit(pAd, &AuthHdr, SUBTYPE_AUTH, 0, Addr2, pAd->ApCfg.ApCliTab[ifIndex].ApCliMlmeAux.Bssid, ifIndex);
					AuthHdr.FC.Wep = 1;
#ifdef MAC_REPEATER_SUPPORT
					if (CliIdx != 0xFF)
						COPY_MAC_ADDR(AuthHdr.Addr2, pAd->ApCfg.ApCliTab[ifIndex].RepeaterCli[CliIdx].CurrentAddress);
#endif /* MAC_REPEATER_SUPPORT */
					
					/* Encrypt challenge text & auth information */
					/* TSC increment */ 
					INC_TX_TSC(pKey->TxTsc, LEN_WEP_TSC);
开发者ID:Sense1988,项目名称:rt2860v2,代码行数:67,代码来源:apcli_auth.c


示例7: TDLS_UAPSD_TrafficRspSend

/*
========================================================================
Routine Description:
	Send a traffic response frame.

Arguments:
	pAd				- WLAN control block pointer
	pTDLS			- the peer entry

Return Value:
	NDIS_STATUS_SUCCESS
	NDIS_STATUS_FAILURE

Note:
========================================================================
*/
static NDIS_STATUS TDLS_UAPSD_TrafficRspSend(
	IN	PRTMP_ADAPTER				pAd,
	IN	UCHAR						*pPeerMac,
	IN	UCHAR						PeerToken)
{
	MAC_TABLE_ENTRY	*pMacEntry; 
	RT_802_11_TDLS *pTDLS = NULL;
	UCHAR	TDLS_ETHERTYPE[] = {0x89, 0x0d};
	UCHAR	Header802_3[14];
	PUCHAR	pOutBuffer = NULL;
	ULONG	FrameLen = 0;
	ULONG	TempLen;
	INT32	LinkId;
	UCHAR	RemoteFrameType = PROTO_NAME_TDLS;
	NDIS_STATUS	NStatus = NDIS_STATUS_FAILURE;


	DBGPRINT(RT_DEBUG_TRACE, ("====> %s\n", __FUNCTION__));

	/* search TDLS entry */
	LinkId = TDLS_SearchLinkId(pAd, pPeerMac);
	if (TDLS_UAPSD_IS_LINK_INVALID(LinkId))
	{
		DBGPRINT(RT_DEBUG_TRACE,
				("%s: can not find the LinkId!\n", __FUNCTION__));
		TDLS_UAPSD_REBUILD_LINK(pAd, pPeerMac);
		goto LabelExit;
	}

	DBGPRINT(RT_DEBUG_TRACE, ("tdls uapsd> LinkId = %d\n", LinkId));

	pTDLS = TDLS_UAPSD_ENTRY_GET(pAd, LinkId);

	/* sanity check */
	if (TDLS_UAPSD_IS_CONN_NOT_BUILT(pTDLS))
	{
		DBGPRINT(RT_DEBUG_TRACE, ("tdls uapsd> link is not yet built "
				"so we can not send a traffic ind to the peer!!!"));
		goto LabelExit;
	}

	/* init */
	MAKE_802_3_HEADER(Header802_3, pTDLS->MacAddr,
						pAd->CurrentAddress, TDLS_ETHERTYPE);

	/* allocate buffer for transmitting message */
	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
	if (NStatus	!= NDIS_STATUS_SUCCESS)
		goto LabelExit;

	/* build the frame */
	MakeOutgoingFrame(pOutBuffer,		&TempLen,
						1,				&RemoteFrameType,
						END_OF_ARGS);
	FrameLen = FrameLen + TempLen;

	TDLS_UAPSD_TrafficRspBuild(pAd, pOutBuffer, &FrameLen, pTDLS, PeerToken);

	hex_dump("TDLS UAPSD Peer Traffic Response sending packet", pOutBuffer, FrameLen);

	/* need to set the power save mode of the peer to ACTIVE */
	/* we will recover its mode after EOSP frame is received */
	pMacEntry = MacTableLookup(pAd, pTDLS->MacAddr);
	if (pMacEntry == NULL)
		goto LabelExit;

	/* peer can not sleep for a while */
		RTMP_PS_VIRTUAL_WAKEUP_PEER(pMacEntry);

	/* send the frame to the peer without AP's help */
	TDLS_UAPSD_PKT_SEND_TO_PEER(pAd, Header802_3, pOutBuffer, FrameLen, pTDLS);
/*	hex_dump("TDLS traffic response send pack", pOutBuffer, FrameLen); */

	NStatus = NDIS_STATUS_SUCCESS;

	/* free resources */
LabelExit:
	if (pOutBuffer != NULL)
		MlmeFreeMemory(pAd, pOutBuffer);
	return NStatus;
}
开发者ID:2421,项目名称:mt7601u_driver_linux,代码行数:97,代码来源:tdls_uapsd.c


示例8: APPeerAuthReqAtIdleAction


//.........这里部分代码省略.........
	DBGPRINT(RT_DEBUG_TRACE,
			("AUTH - MBSS(%d), Rcv AUTH seq#%d, Alg=%d, Status=%d from "
			"[wcid=%d]%02x:%02x:%02x:%02x:%02x:%02x\n",
			apidx, Seq, Alg, Status, Elem->Wcid, PRINT_MAC(Addr2)));


	/* fail in ACL checking => send an AUTH-Fail seq#2. */
    if (! ApCheckAccessControlList(pAd, Addr2, apidx))
    {
		ASSERT(Seq == 1);
		ASSERT(pEntry == NULL);
		APPeerAuthSimpleRspGenAndSend(pAd, pRcvHdr, Alg, Seq + 1, MLME_UNSPECIFY_FAIL);

		/* If this STA exists, delete it. */
		if (pEntry)
			MacTableDeleteEntry(pAd, pEntry->Aid, pEntry->Addr);

		RTMPSendWirelessEvent(pAd, IW_MAC_FILTER_LIST_EVENT_FLAG, Addr2, apidx, 0);

		DBGPRINT(RT_DEBUG_TRACE,
				("Failed in ACL checking => send an AUTH seq#2 with "
				"Status code = %d\n", MLME_UNSPECIFY_FAIL));
		return;
    }

	if ((Alg == AUTH_MODE_OPEN) && 
		(pAd->ApCfg.MBSSID[apidx].AuthMode != Ndis802_11AuthModeShared)) 
	{
		if (!pEntry)
			pEntry = MacTableInsertEntry(pAd, Addr2, apidx, OPMODE_AP, TRUE);

		if (pEntry)
		{
                        {
			pEntry->AuthState = AS_AUTH_OPEN;
			pEntry->Sst = SST_AUTH; /* what if it already in SST_ASSOC ??????? */
                        }
			APPeerAuthSimpleRspGenAndSend(pAd, pRcvHdr, Alg, Seq + 1, MLME_SUCCESS);

		}
		else
			; /* MAC table full, what should we respond ????? */
	}
	else if ((Alg == AUTH_MODE_KEY) && 
				((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeShared)
				|| (pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeAutoSwitch)))
	{
		if (!pEntry)
			pEntry = MacTableInsertEntry(pAd, Addr2, apidx, OPMODE_AP, TRUE);

		if (pEntry)
		{
			pEntry->AuthState = AS_AUTHENTICATING;
			pEntry->Sst = SST_NOT_AUTH; /* what if it already in SST_ASSOC ??????? */

			/* log this STA in AuthRspAux machine, only one STA is stored. If two STAs using */
			/* SHARED_KEY authentication mingled together, then the late comer will win. */
			COPY_MAC_ADDR(&pAd->ApMlmeAux.Addr, Addr2);
			for(i=0; i<CIPHER_TEXT_LEN; i++) 
				pAd->ApMlmeAux.Challenge[i] = RandomByte(pAd);

			RspReason = 0;
			Seq++;
  
			NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
			if(NStatus != NDIS_STATUS_SUCCESS) 
				return;  /* if no memory, can't do anything */

			DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Send AUTH seq#2 (Challenge)\n"));

			MgtMacHeaderInit(pAd, &AuthHdr, SUBTYPE_AUTH, 0, 	Addr2, 
								pAd->ApCfg.MBSSID[apidx].Bssid);
			MakeOutgoingFrame(pOutBuffer,            &FrameLen,
								sizeof(HEADER_802_11), &AuthHdr,
								2,                     &Alg,
								2,                     &Seq,
								2,                     &RspReason,
								1,                     &ChTxtIe,
								1,                     &ChTxtLen,
								CIPHER_TEXT_LEN,       pAd->ApMlmeAux.Challenge,
								END_OF_ARGS);
			MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
			MlmeFreeMemory(pAd, pOutBuffer);
		}
		else
			; /* MAC table full, what should we respond ???? */
	} 
	else
	{
		/* wrong algorithm */
		APPeerAuthSimpleRspGenAndSend(pAd, pRcvHdr, Alg, Seq + 1, MLME_ALG_NOT_SUPPORT);

		/* If this STA exists, delete it. */
		if (pEntry)
			MacTableDeleteEntry(pAd, pEntry->Aid, pEntry->Addr);

		DBGPRINT(RT_DEBUG_TRACE, ("AUTH - Alg=%d, Seq=%d, AuthMode=%d\n",
				Alg, Seq, pAd->ApCfg.MBSSID[apidx].AuthMode));
	}
}
开发者ID:derekcentrico,项目名称:m6.kernel.3.x,代码行数:101,代码来源:ap_auth.c


示例9: TDLS_UAPSD_CmdSimSetupReqSend

/*
========================================================================
Routine Description:
	Simulate to send a TDLS Setup request to a peer.

Arguments:
	pAd				- WLAN control block pointer
	Argc			- the number of input parameters
	*pArgv			- input parameters

Return Value:
	None

Note:
	1. Command Format:
		iwpriv ra0 set tdls=51_[PEER MAC]

	11.21.4 TDLS direct-link establishment
	TDLS Setup Request frames, TDLS Setup Response frames, and TDLS Setup
	Confirm frames shall be transmitted through the AP and shall not be
	transmitted to a group address.
========================================================================
*/
static VOID TDLS_UAPSD_CmdSimSetupReqSend(
	IN	PRTMP_ADAPTER				pAd,
	IN	INT32						Argc,
	IN	CHAR						*pArgv)
{
	MLME_QUEUE_ELEM *pElem;
	RT_802_11_TDLS TDLS, *pTDLS = &TDLS;
	UCHAR	TDLS_ETHERTYPE[] = {0x89, 0x0d};
	UCHAR	Header802_3[14];
	PUCHAR	pOutBuffer = NULL;
	ULONG	FrameLen = 0;
	ULONG	TempLen;
	UCHAR	RemoteFrameType = PROTO_NAME_TDLS;
	NDIS_STATUS	NStatus = NDIS_STATUS_SUCCESS;
	UCHAR PeerMac[6];
	UINT32 IdTdls;


	/* get MAC address */
	TDLS_UAPSD_CmdUtilMacGet(&pArgv, PeerMac);

	/* allocate buffer for transmitting message */
	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
	if (NStatus	!= NDIS_STATUS_SUCCESS)	
		return;

	os_alloc_mem(NULL, (UCHAR **)&pElem, sizeof(MLME_QUEUE_ELEM));
	if (pElem == NULL)
	{
		MlmeFreeMemory(pAd, pOutBuffer);
		return;
	}

	/* init link entry */
	NdisZeroMemory(pTDLS, sizeof(RT_802_11_TDLS));
	pTDLS->TimeOut = 0;
	COPY_MAC_ADDR(pTDLS->MacAddr, PeerMac);
	pTDLS->Valid = 1;

	/* search a empty entry */
	for(IdTdls=0; IdTdls<MAX_NUM_OF_TDLS_ENTRY; IdTdls++)
	{
		if (!pAd->StaCfg.TdlsInfo.TDLSEntry[IdTdls].Valid)
		{
			NdisMoveMemory(&pAd->StaCfg.TdlsInfo.TDLSEntry[IdTdls],
							pTDLS, sizeof(RT_802_11_TDLS_UI));
			break;
		}
	}
	if (IdTdls == MAX_NUM_OF_TDLS_ENTRY)
	{
		MlmeFreeMemory(pAd, pOutBuffer);
		os_free_mem(NULL, pElem);
		return;
	}

	/* init request frame */
	MAKE_802_3_HEADER(Header802_3, pTDLS->MacAddr,
						pAd->CurrentAddress, TDLS_ETHERTYPE);

	MakeOutgoingFrame(pOutBuffer,		&TempLen,
						1,				&RemoteFrameType,
						END_OF_ARGS);

	FrameLen = FrameLen + TempLen;
	TDLS_BuildSetupRequest(pAd, pOutBuffer, &FrameLen,
							TDLS_UAPSD_ENTRY_GET(pAd, IdTdls));
	hex_dump("Request=", pOutBuffer, FrameLen);

	TDLS_UAPSD_PKT_SEND_THROUGH_AP(pAd, Header802_3, pOutBuffer, FrameLen);

	/* init response frame */
	FrameLen += LENGTH_802_11 + LENGTH_802_1_H;
	pElem->MsgLen = LENGTH_802_11 + LENGTH_802_1_H + FrameLen;

	/* copy payload type, category, action (3B) */
	memcpy(pElem->Msg + LENGTH_802_11 + LENGTH_802_1_H,
//.........这里部分代码省略.........
开发者ID:2421,项目名称:mt7601u_driver_linux,代码行数:101,代码来源:tdls_uapsd.c


示例10: TDLS_UAPSD_CmdSimTrafficIndRcv

/*
========================================================================
Routine Description:
	Simulate to receive a TDLS Traffic indication from a peer.

Arguments:
	pAd				- WLAN control block pointer
	Argc			- the number of input parameters
	*pArgv			- input parameters

Return Value:
	None

Note:
	1. Command Format:
		iwpriv ra0 set tdls=53_[PEER MAC]
========================================================================
*/
static VOID TDLS_UAPSD_CmdSimTrafficIndRcv(
	IN	PRTMP_ADAPTER				pAd,
	IN	INT32						Argc,
	IN	CHAR						*pArgv)
{
	UCHAR PeerMac[6];
	MLME_QUEUE_ELEM *pElem = NULL;
	PUCHAR pOutBuffer = NULL;
	ULONG FrameLen = 0;
	INT32 LinkId;
	RT_802_11_TDLS *pTDLS = NULL;
	NDIS_STATUS	NStatus = NDIS_STATUS_SUCCESS;
	UCHAR RemoteFrameType = PROTO_NAME_TDLS;
	ULONG TempLen;
	UCHAR Token;			// Dialog token


	/* get MAC address */
	TDLS_UAPSD_CmdUtilMacGet(&pArgv, PeerMac);

	/* allocate resources */
	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
	if (NStatus	!= NDIS_STATUS_SUCCESS)
		goto LabelExit;

	/* make up a virtual traffic indication frame */
	/* search TDLS entry */
	LinkId = TDLS_SearchLinkId(pAd, PeerMac);
	if (TDLS_UAPSD_IS_LINK_INVALID(LinkId))
	{
		DBGPRINT(RT_DEBUG_ERROR,
				("%s: can not find the LinkId!\n", __FUNCTION__));
		TDLS_UAPSD_REBUILD_LINK(pAd, PeerMac);
		goto LabelExit;
	}
	pTDLS = TDLS_UAPSD_ENTRY_GET(pAd, LinkId);

	/* build the frame */
	/* fill remote frame type */
	MakeOutgoingFrame(pOutBuffer,		&TempLen,
						1,				&RemoteFrameType,
						END_OF_ARGS);
	FrameLen = TempLen;

	/* fill action code */
	TDLS_InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen,
						CATEGORY_TDLS, TDLS_ACTION_CODE_SETUP_REQUEST);

	/* fill Dialog Token */
	TDLS_UAPSD_DIALOG_GET(pAd, Token);
	TDLS_InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen,
							Token);

	/* fill link identifier */
	TDLS_InsertLinkIdentifierIE(pAd, (pOutBuffer + FrameLen), &FrameLen,
								pTDLS->MacAddr, pAd->CurrentAddress);

	/* fill PU buffer status */
	TDLS_InsertPuBufferStatus(pAd, (pOutBuffer + FrameLen), &FrameLen,
							pTDLS->MacAddr);

	if (FrameLen <= 0)
		goto LabelExit;

/*	hex_dump("TDLS traffic indication send pack", pOutBuffer, FrameLen); */

	/* allocate resources */
	os_alloc_mem(NULL, (UCHAR **)&pElem, sizeof(MLME_QUEUE_ELEM));
	if (pElem == NULL)
		goto LabelExit;

	/* copy the indication frame */
	FrameLen += LENGTH_802_11 + LENGTH_802_1_H;
	pElem->MsgLen = LENGTH_802_11 + LENGTH_802_1_H + FrameLen;

	/* copy payload */
	memcpy(pElem->Msg + LENGTH_802_11 + LENGTH_802_1_H,
			pOutBuffer, FrameLen);

	/* handle it */
	TDLS_UAPSD_PeerTrafficIndAction(pAd, pElem);

//.........这里部分代码省略.........
开发者ID:2421,项目名称:mt7601u_driver_linux,代码行数:101,代码来源:tdls_uapsd.c


示例11: APMlmeDeauthReqAction

/*
    ==========================================================================
    Description:
        Upper Layer request to kick out a STA
    ==========================================================================
 */
static VOID APMlmeDeauthReqAction(
    IN PRTMP_ADAPTER pAd, 
    IN MLME_QUEUE_ELEM *Elem) 
{
    MLME_DEAUTH_REQ_STRUCT	*pInfo;
    HEADER_802_11		Hdr;
    PUCHAR			pOutBuffer = NULL;
    NDIS_STATUS			NStatus;
    ULONG			FrameLen = 0;
    MAC_TABLE_ENTRY		*pEntry;
    UCHAR			apidx;


    pInfo = (MLME_DEAUTH_REQ_STRUCT *)Elem->Msg;

    if (Elem->Wcid < MAX_LEN_OF_MAC_TABLE)
    {
	pEntry = &pAd->MacTab.Content[Elem->Wcid];
	if (!pEntry)
		return;
		
#ifdef WAPI_SUPPORT
	WAPI_InternalCmdAction(pAd, 
		   pEntry->AuthMode, 
		   pEntry->apidx, 
		   pEntry->Addr, 
		   WAI_MLME_DISCONNECT);		
#endif /* WAPI_SUPPORT */
		
	/* send wireless event - for deauthentication */
	RTMPSendWirelessEvent(pAd, IW_DEAUTH_EVENT_FLAG, pInfo->Addr, 0, 0);  
	ApLogEvent(pAd, pInfo->Addr, EVENT_DISASSOCIATED);

	apidx = pEntry->apidx;

        /* 1. remove this STA from MAC table */
        MacTableDeleteEntry(pAd, Elem->Wcid, pInfo->Addr);

        /* 2. send out DE-AUTH request frame */
        NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
        if (NStatus != NDIS_STATUS_SUCCESS) 
            return;

        DBGPRINT(RT_DEBUG_TRACE, // 
		("AUTH - Send DE-AUTH req to %02x:%02x:%02x:%02x:%02x:%02x\n",
		pInfo->Addr[0], pInfo->Addr[1], pInfo->Addr[2],
		pInfo->Addr[3], pInfo->Addr[4], pInfo->Addr[5]));
           		
        MgtMacHeaderInit(pAd, &Hdr, SUBTYPE_DEAUTH, 0, pInfo->Addr,
#ifdef P2P_SUPPORT
			pAd->ApCfg.MBSSID[apidx].Bssid,
#endif /* P2P_SUPPORT */
			pAd->ApCfg.MBSSID[apidx].Bssid);
        MakeOutgoingFrame(pOutBuffer,	&FrameLen, 
                          sizeof(HEADER_802_11),&Hdr, 
                          2,&pInfo->Reason, 
                          END_OF_ARGS);
        MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);

        MlmeFreeMemory(pAd, pOutBuffer);
    }
}
开发者ID:awaysoft,项目名称:openwrt_cc,代码行数:68,代码来源:ap_auth.c


示例12: APCls2errAction

/*
    ==========================================================================
    Description:
        Some STA/AP
    Note:
        This action should never trigger AUTH state transition, therefore we
        separate it from AUTH state machine, and make it as a standalone service
    ==========================================================================
 */
VOID APCls2errAction(
    IN PRTMP_ADAPTER pAd, 
	IN 	ULONG Wcid, 
    IN	PHEADER_802_11	pHeader) 
{
    HEADER_802_11 Hdr;
    PUCHAR        pOutBuffer = NULL;
    NDIS_STATUS   NStatus;
    ULONG         FrameLen = 0;
    USHORT        Reason = REASON_CLS2ERR;
    MAC_TABLE_ENTRY *pEntry = NULL;


	if (Wcid < MAX_LEN_OF_MAC_TABLE)
	{
		pEntry = &(pAd->MacTab.Content[Wcid]);
	}

  	if (pEntry && IS_ENTRY_CLIENT(pEntry))
    	{
        /*ApLogEvent(pAd, pAddr, EVENT_DISASSOCIATED); */
        MacTableDeleteEntry(pAd, pEntry->Aid, pHeader->Addr2);
	}
	else
	{
		UCHAR idx;

		for (idx = 0; idx < pAd->ApCfg.BssidNum; idx++)
		{
			PMULTISSID_STRUCT pMbss = &pAd->ApCfg.MBSSID[idx];

			if (NdisEqualMemory(pMbss->Bssid, pHeader->Addr1, MAC_ADDR_LEN))
				break;
		}

		if (idx == pAd->ApCfg.BssidNum)
			return;
	}

	/* send out DEAUTH request frame */
	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
	if (NStatus != NDIS_STATUS_SUCCESS) 
		return;

	DBGPRINT(RT_DEBUG_TRACE, // 
			("AUTH - Class 2 error, Send DEAUTH frame to "
			"%02x:%02x:%02x:%02x:%02x:%02x\n",
			PRINT_MAC(pHeader->Addr2)));

	MgtMacHeaderInit(pAd, &Hdr, SUBTYPE_DEAUTH, 0, pHeader->Addr2, 
#ifdef P2P_SUPPORT
						pHeader->Addr1,
#endif /* P2P_SUPPORT */
						pHeader->Addr1);
	MakeOutgoingFrame(pOutBuffer,            &FrameLen, 
			  sizeof(HEADER_802_11), &Hdr, 
			  2,                     &Reason, 
			  END_OF_ARGS);
	MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
	MlmeFreeMemory(pAd, pOutBuffer);
}
开发者ID:awaysoft,项目名称:openwrt_cc,代码行数:70,代码来源:ap_auth.c


示例13: SendPSMPAction

/*
Description : Send PSMP Action frame If PSMP mode switches.
*/
VOID SendPSMPAction(
				   IN PRTMP_ADAPTER		pAd,
				   IN UCHAR				Wcid,
				   IN UCHAR				Psmp)
{
	PUCHAR          pOutBuffer = NULL;
	NDIS_STATUS     NStatus;
	//ULONG           Idx;
	FRAME_PSMP_ACTION   Frame;
	ULONG           FrameLen;
#ifdef RT30xx
	UCHAR			bbpdata=0;
	UINT32			macdata;
#endif // RT30xx //

	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);	 //Get an unused nonpaged memory
	if (NStatus != NDIS_STATUS_SUCCESS)
	{
		DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() allocate memory failed \n"));
		return;
	}
#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr);
#endif // CONFIG_STA_SUPPORT //

	Frame.Category = CATEGORY_HT;
	Frame.Action = SMPS_ACTION;
	switch (Psmp)
	{
		case MMPS_ENABLE:
#ifdef RT30xx
			if (IS_RT3090(pAd))
			{
				// disable MMPS BBP control register
				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
				bbpdata &= ~(0x04);	//bit 2
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);

				// disable MMPS MAC control register
				RTMP_IO_READ32(pAd, 0x1210, &macdata);
				macdata &= ~(0x09);	//bit 0, 3
				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
			}
#endif // RT30xx //
			Frame.Psmp = 0;
			break;
		case MMPS_DYNAMIC:
#ifdef RT30xx
			if (IS_RT3090(pAd))
			{
				// enable MMPS BBP control register
				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
				bbpdata |= 0x04;	//bit 2
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);

				// enable MMPS MAC control register
				RTMP_IO_READ32(pAd, 0x1210, &macdata);
				macdata |= 0x09;	//bit 0, 3
				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
			}
#endif // RT30xx //
			Frame.Psmp = 3;
			break;
		case MMPS_STATIC:
#ifdef RT30xx
			if (IS_RT3090(pAd))
			{
				// enable MMPS BBP control register
				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
				bbpdata |= 0x04;	//bit 2
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);

				// enable MMPS MAC control register
				RTMP_IO_READ32(pAd, 0x1210, &macdata);
				macdata |= 0x09;	//bit 0, 3
				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
			}
#endif // RT30xx //
			Frame.Psmp = 1;
			break;
	}
	MakeOutgoingFrame(pOutBuffer,               &FrameLen,
					  sizeof(FRAME_PSMP_ACTION),      &Frame,
					  END_OF_ARGS);
	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
	MlmeFreeMemory(pAd, pOutBuffer);
	DBGPRINT(RT_DEBUG_ERROR,("HT - SendPSMPAction( %d )  \n", Frame.Psmp));
}
开发者ID:ClarkChen633,项目名称:rtl819x-toolchain,代码行数:92,代码来源:ba_action.c


示例14: WpaMicFailureReportFrame

VOID	WpaMicFailureReportFrame(
	IN  PRTMP_ADAPTER   pAd,
	IN MLME_QUEUE_ELEM *Elem)
{
	PUCHAR              pOutBuffer = NULL;
	UCHAR               Header802_3[14];
	ULONG               FrameLen = 0;
	UCHAR				*mpool;
	PEAPOL_PACKET       pPacket;
	UCHAR               Mic[16];
    BOOLEAN             bUnicast;
        
	DBGPRINT(RT_DEBUG_TRACE, ("WpaMicFailureReportFrame ----->\n"));

    bUnicast = (Elem->Msg[0] == 1 ? TRUE:FALSE);
	pAd->Sequence = ((pAd->Sequence) + 1) & (MAX_SEQ_NUMBER);

	/* init 802.3 header and Fill Packet */
	MAKE_802_3_HEADER(Header802_3, pAd->CommonCfg.Bssid, pAd->CurrentAddress, EAPOL);	

	/* Allocate memory for output */
	os_alloc_mem(NULL, (PUCHAR *)&mpool, TX_EAPOL_BUFFER);
	if (mpool == NULL)
    {
        DBGPRINT(RT_DEBUG_ERROR, ("!!!%s : no memory!!!\n", __FUNCTION__));
        return;
    }

	pPacket = (PEAPOL_PACKET)mpool;
	NdisZeroMemory(pPacket, TX_EAPOL_BUFFER);
	
	pPacket->ProVer	= EAPOL_VER;
	pPacket->ProType	= EAPOLKey;
	
	pPacket->KeyDesc.Type = WPA1_KEY_DESC;

    /* Request field presented */
    pPacket->KeyDesc.KeyInfo.Request = 1;
    
	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
	{
		pPacket->KeyDesc.KeyInfo.KeyDescVer = 2;
	} 
	else	  /* TKIP */
	{
		pPacket->KeyDesc.KeyInfo.KeyDescVer = 1;
	}

    pPacket->KeyDesc.KeyInfo.KeyType = (bUnicast ? PAIRWISEKEY : GROUPKEY);

	/* KeyMic field presented */
	pPacket->KeyDesc.KeyInfo.KeyMic  = 1;

    /* Error field presented */
	pPacket->KeyDesc.KeyInfo.Error  = 1;
    
	/* Update packet length after decide Key data payload */
	SET_UINT16_TO_ARRARY(pPacket->Body_Len, MIN_LEN_OF_EAPOL_KEY_MSG)

	/* Key Replay Count */
	NdisMoveMemory(pPacket->KeyDesc.ReplayCounter, pAd->StaCfg.ReplayCounter, LEN_KEY_DESC_REPLAY);
    inc_byte_array(pAd->StaCfg.ReplayCounter, 8);

	/* Convert to little-endian format. */
	*((USHORT *)&pPacket->KeyDesc.KeyInfo) = cpu2le16(*((USHORT *)&pPacket->KeyDesc.KeyInfo));


	MlmeAllocateMemory(pAd, (PUCHAR *)&pOutBuffer);  /* allocate memory */
	if(pOutBuffer == NULL)
	{
		os_free_mem(NULL, mpool);
		return;
	}
    
	/*
	   Prepare EAPOL frame for MIC calculation
	   Be careful, only EAPOL frame is counted for MIC calculation
	*/
	MakeOutgoingFrame(pOutBuffer,               &FrameLen,
		              CONV_ARRARY_TO_UINT16(pPacket->Body_Len) + 4,   pPacket,
		              END_OF_ARGS);

	/* Prepare and Fill MIC value */
	NdisZeroMemory(Mic, sizeof(Mic));
	if(pAd->StaCfg.WepStatus  == Ndis802_11Encryption3Enabled)
	{	/* AES */
        UCHAR digest[20] = {0};
		RT_HMAC_SHA1(pAd->StaCfg.PTK, LEN_PTK_KCK, pOutBuffer, FrameLen, digest, SHA1_DIGEST_SIZE);
		NdisMoveMemory(Mic, digest, LEN_KEY_DESC_MIC);
	} 
	else
	{	/* TKIP */
		RT_HMAC_MD5(pAd->StaCfg.PTK, LEN_PTK_KCK, pOutBuffer, FrameLen, Mic, MD5_DIGEST_SIZE);
	}
	NdisMoveMemory(pPacket->KeyDesc.KeyMic, Mic, LEN_KEY_DESC_MIC);

	/* copy frame to Tx ring and send MIC failure report frame to authenticator */
	RTMPToWirelessSta(pAd, &pAd->MacTab.Content[BSSID_WCID],
					  Header802_3, LENGTH_802_3, 
					  (PUCHAR)pPacket, 
//.........这里部分代码省略.........
开发者ID:hillbeast,项目名称:android_kernel_ainol_novo8,代码行数:101,代码来源:wpa.c


示例15: BAOriSessionAdd

VOID BAOriSessionAdd(
			IN PRTMP_ADAPTER    pAd,
					IN MAC_TABLE_ENTRY  *pEntry,
			IN PFRAME_ADDBA_RSP pFrame)
{
	BA_ORI_ENTRY  *pBAEntry = NULL;
	BOOLEAN       Cancelled;
	UCHAR         TID;
	USHORT        Idx;
	PUCHAR          pOutBuffer2 = NULL;
	NDIS_STATUS     NStatus;
	ULONG           FrameLen;
	FRAME_BAR       FrameBar;

	TID = pFrame->BaParm.TID;
	Idx = pEntry->BAOriWcidArray[TID];
	pBAEntry =&pAd->BATable.BAOriEntry[Idx];

	// Start fill in parameters.
	if ((Idx !=0) && (pBAEntry->TID == TID) && (pBAEntry->ORI_BA_Status == Originator_WaitRes))
	{
		pBAEntry->BAWinSize = min(pBAEntry->BAWinSize, ((UCHAR)pFrame->BaParm.BufSize));
		BA_MaxWinSizeReasign(pAd, pEntry, &pBAEntry->BAWinSize);

		pBAEntry->TimeOutValue = pFrame->TimeOutValue;
		pBAEntry->ORI_BA_Status = Originator_Done;
		// reset sequence number
		pBAEntry->Sequence = BA_ORI_INIT_SEQ;
		// Set Bitmap flag.
		pEntry->TXBAbitmap |= (1<<TID);
				RTMPCancelTimer(&pBAEntry->ORIBATimer, &Cancelled);

		pBAEntry->ORIBATimer.TimerValue = 0;	//pFrame->TimeOutValue;

		DBGPRINT(RT_DEBUG_TRACE,("%s : TXBAbitmap = %x, BAWinSize = %d, TimeOut = %ld\n", __FUNCTION__, pEntry->TXBAbitmap,
								 pBAEntry->BAWinSize, pBAEntry->ORIBATimer.TimerValue));

		// SEND BAR ;
		NStatus = MlmeAllocateMemory(pAd, &pOutBuffer2);  //Get an unused nonpaged memory
		if (NStatus != NDIS_STATUS_SUCCESS)
		{
			DBGPRINT(RT_DEBUG_TRACE,("BA - BAOriSessionAdd() allocate memory failed \n"));
			return;
		}


#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress);
#endif // CONFIG_STA_SUPPORT //

		FrameBar.StartingSeq.field.FragNum = 0;	// make sure sequence not clear in DEL function.
		FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence; // make sure sequence not clear in DEL funciton.
		FrameBar.BarControl.TID = pBAEntry->TID; // make sure sequence not clear in DEL funciton.
		MakeOutgoingFrame(pOutBuffer2,              &FrameLen,
						  size 

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ MlmeEnqueue函数代码示例发布时间:2022-05-30
下一篇:
C++ Mix_VolumeChunk函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap