C++ Mutate函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中Mutate函数的典型用法代码示例。如果您正苦于以下问题：C++ Mutate函数的具体用法？C++ Mutate怎么用？C++ Mutate使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了Mutate函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: init

void MotionMaster::MoveKnockbackFrom(float srcX, float srcY, float speedXY, float speedZ)
{
    //this function may make players fall below map
    if (_owner->GetTypeId() == TYPEID_PLAYER)
        return;

    float x, y, z;
    float moveTimeHalf = speedZ / Movement::gravity;
    float dist = 2 * moveTimeHalf * speedXY;
    float max_height = -Movement::computeFallElevation(moveTimeHalf, false, -speedZ);

    _owner->GetNearPoint(_owner, x, y, z, _owner->GetObjectSize(), dist, _owner->GetAngle(srcX, srcY) + M_PI);

    Movement::MoveSplineInit init(*_owner);
    init.MoveTo(x, y, z);
    init.SetParabolic(max_height, 0);
    init.SetOrientationFixed(true);
    init.SetVelocity(speedXY);
    init.Launch();
    Mutate(new EffectMovementGenerator(0), MOTION_SLOT_CONTROLLED);
}

开发者ID:AtVirus，项目名称:SkyFireEMU，代码行数:21，代码来源:MotionMaster.cpp

示例2: init

void MotionMaster::MoveFall(uint32 id/*=0*/)
{
    // use larger distance for vmap height search than in most other cases
    float tz = _owner->GetMap()->GetHeight(_owner->GetPositionX(), _owner->GetPositionY(), _owner->GetPositionZ(), true, MAX_FALL_DISTANCE);
    if (tz <= INVALID_HEIGHT)
    {
        sLog->outStaticDebug("MotionMaster::MoveFall: unable retrive a proper height at map %u (x: %f, y: %f, z: %f).",
            _owner->GetMap()->GetId(), _owner->GetPositionX(), _owner->GetPositionX(), _owner->GetPositionZ());
        return;
    }

    // Abort too if the ground is very near
    if (fabs(_owner->GetPositionZ() - tz) < 0.1f)
        return;

    Movement::MoveSplineInit init(*_owner);
    init.MoveTo(_owner->GetPositionX(), _owner->GetPositionY(),tz);
    init.SetFall();
    init.Launch();
    Mutate(new EffectMovementGenerator(id), MOTION_SLOT_CONTROLLED);
}

开发者ID:Facelive，项目名称:ArkCORE2，代码行数:21，代码来源:MotionMaster.cpp

示例3: init

void MotionMaster::MoveFall()
{
    // use larger distance for vmap height search than in most other cases
    float tz = m_owner->GetMap()->GetHeight(m_owner->GetPhaseMask(), m_owner->GetPositionX(), m_owner->GetPositionY(), m_owner->GetPositionZ(), true, MAX_FALL_DISTANCE);
    if (tz <= INVALID_HEIGHT)
    {
        sLog.outError("MotionMaster::MoveFall: unable retrive a proper height at map %u (x: %f, y: %f, z: %f).",
            m_owner->GetMap()->GetId(), m_owner->GetPositionX(), m_owner->GetPositionY(), m_owner->GetPositionZ());
        return;
    }

    // Abort too if the ground is very near
    if (fabs(m_owner->GetPositionZ() - tz) < 0.1f)
        return;

    Movement::MoveSplineInit init(*m_owner);
    init.MoveTo(m_owner->GetPositionX(),m_owner->GetPositionY(),tz);
    init.SetFall();
    init.Launch();
    Mutate(new EffectMovementGenerator(0), UNIT_ACTION_EFFECT);
}

开发者ID:alolo，项目名称:mangos，代码行数:21，代码来源:MotionMaster.cpp

示例4: FlightPathMovementGenerator

void MotionMaster::MoveTaxiFlight(uint32 path, uint32 pathnode)
{
    if (_owner->GetTypeId() == TYPEID_PLAYER)
    {
        if (path < sTaxiPathNodesByPath.size())
        {
            FlightPathMovementGenerator* mgen = new FlightPathMovementGenerator(sTaxiPathNodesByPath[path], pathnode);
            Mutate(mgen, MOTION_SLOT_CONTROLLED);
        }
        else
        {
            TC_LOG_ERROR("misc", "%s attempt taxi to (not existed Path %u node %u)",
                         _owner->GetName().c_str(), path, pathnode);
        }
    }
    else
    {
        TC_LOG_ERROR("misc", "Creature (Entry: %u GUID: %u) attempt taxi to (Path %u node %u)",
                     _owner->GetEntry(), _owner->GetGUIDLow(), path, pathnode);
    }
}

开发者ID:Exodius，项目名称:chuspi，代码行数:21，代码来源:MotionMaster.cpp

示例5: DEBUG_FILTER_LOG

void MotionMaster::MoveTargetedHome()
{
   // if (m_owner->hasUnitState(UNIT_STAT_LOST_CONTROL))
       // return;

    if (m_owner->GetTypeId() == TYPEID_UNIT && !((Creature*)m_owner)->GetCharmerOrOwnerGuid())
    {
        // Manual exception for linked mobs
        if (m_owner->IsLinkingEventTrigger() && m_owner->GetMap()->GetCreatureLinkingHolder()->TryFollowMaster((Creature*)m_owner))
            DEBUG_FILTER_LOG(LOG_FILTER_AI_AND_MOVEGENSS, "MotionMaster: %s refollowed linked master", m_owner->GetGuidStr().c_str());
        else
        {
            DEBUG_FILTER_LOG(LOG_FILTER_AI_AND_MOVEGENSS, "MotionMaster: %s targeted home", m_owner->GetGuidStr().c_str());
            Mutate(new HomeMovementGenerator<Creature>(), UNIT_ACTION_HOME);
        }
    }
    else if (m_owner->GetTypeId() == TYPEID_UNIT && ((Creature*)m_owner)->GetCharmerOrOwnerGuid())
    {
        if (Unit* target = ((Creature*)m_owner)->GetCharmerOrOwner())
        {
            float angle = ((Creature*)m_owner)->IsPet() ? ((Pet*)m_owner)->GetPetFollowAngle() : PET_FOLLOW_ANGLE;
            DEBUG_FILTER_LOG(LOG_FILTER_AI_AND_MOVEGENSS, "MotionMaster: %s follow to %s", m_owner->GetGuidStr().c_str(), target->GetGuidStr().c_str());
            switch (((Creature*)m_owner)->GetCharmState(CHARM_STATE_COMMAND))
            {
                case COMMAND_STAY:
                    MoveIdle();
                    break;
                case COMMAND_FOLLOW:
                case COMMAND_ATTACK:
                default:
                    MoveFollow(target, PET_FOLLOW_DIST, angle);
                    break;
            }
        }
        else
            DEBUG_FILTER_LOG(LOG_FILTER_AI_AND_MOVEGENSS, "%s attempt but fail to follow owner", m_owner->GetGuidStr().c_str());
    }
    else
        sLog.outError("MotionMaster: %s attempt targeted home", m_owner->GetGuidStr().c_str());
}

开发者ID:Sar777，项目名称:mangos3，代码行数:40，代码来源:MotionMaster.cpp

示例6: DEBUG_FILTER_LOG

void MotionMaster::MoveTaxiFlight(uint32 path, uint32 pathnode)
{
    if (m_owner->GetTypeId() == TYPEID_PLAYER)
    {
        if (path < sTaxiPathNodesByPath.size())
        {
            DEBUG_FILTER_LOG(LOG_FILTER_AI_AND_MOVEGENSS, "%s taxi to (Path %u node %u)", m_owner->GetGuidStr().c_str(), path, pathnode);
            FlightPathMovementGenerator* mgen = new FlightPathMovementGenerator(sTaxiPathNodesByPath[path], pathnode);
            Mutate(mgen);
        }
        else
        {
            sLog.outError("%s attempt taxi to (nonexistent Path %u node %u)",
                          m_owner->GetGuidStr().c_str(), path, pathnode);
        }
    }
    else
    {
        sLog.outError("%s attempt taxi to (Path %u node %u)",
                      m_owner->GetGuidStr().c_str(), path, pathnode);
    }
}

开发者ID:mathman，项目名称:mangos-tbc，代码行数:22，代码来源:MotionMaster.cpp

示例7: top

void MotionMaster::MovePath(uint32 path_id, bool repeatable)
{
    if (!path_id)
        return;
    //We set waypoint movement as new default movement generator
    // clear ALL movement generators (including default)
    /*while (!empty())
    {
        MovementGenerator *curr = top();
        curr->Finalize(*_owner);
        pop();
        if (!isStatic(curr))
            delete curr;
    }*/

    //_owner->GetTypeId() == TYPEID_PLAYER ?
    //Mutate(new WaypointMovementGenerator<Player>(path_id, repeatable)):
    Mutate(new WaypointMovementGenerator<Creature>(path_id, repeatable), MOTION_SLOT_IDLE);

    TC_LOG_DEBUG("misc", "%s start moving over path (Id:%u, repeatable: %s)",
                 _owner->GetGUID().ToString().c_str(), path_id, repeatable ? "YES" : "NO");
}

开发者ID:alex1kiss，项目名称:LegacyCore_6.x.x，代码行数:22，代码来源:MotionMaster.cpp

示例8: to

void MotionMaster::MoveTaxiFlight(uint32 path, uint32 pathnode)
{
    if(i_owner->GetTypeId() == TYPEID_PLAYER)
    {
        if(path < sTaxiPathNodesByPath.size())
        {
            sLog->outStaticDebug("%s taxi to (Path %u node %u)", i_owner->GetName(), path, pathnode);
            FlightPathMovementGenerator* mgen = new FlightPathMovementGenerator(sTaxiPathNodesByPath[path], pathnode);
            Mutate(mgen, MOTION_SLOT_CONTROLLED);
        }
        else
        {
            sLog->outError("%s attempt taxi to (not existed Path %u node %u)",
            i_owner->GetName(), path, pathnode);
        }
    }
    else
    {
        sLog->outError("Creature (Entry: %u GUID: %u) attempt taxi to (Path %u node %u)",
            i_owner->GetEntry(), i_owner->GetGUIDLow(), path, pathnode);
    }
}

开发者ID:Darkelmo，项目名称:MythCore，代码行数:22，代码来源:MotionMaster.cpp

示例9: MoveWaypoint

void MotionMaster::MoveWaypoint(int32 id /*=0*/, uint32 source /*=0==PATH_NO_PATH*/, uint32 initialDelay /*=0*/, uint32 overwriteEntry /*=0*/)
{
    if (m_owner->GetTypeId() == TYPEID_UNIT)
    {
        if (GetCurrentMovementGeneratorType() == WAYPOINT_MOTION_TYPE)
        {
            sLog.outError("%s attempt to MoveWaypoint() but is already using waypoint", m_owner->GetGuidStr().c_str());
            return;
        }

        Creature* creature = (Creature*)m_owner;

        DEBUG_FILTER_LOG(LOG_FILTER_AI_AND_MOVEGENSS, "%s start MoveWaypoint()", m_owner->GetGuidStr().c_str());
        WaypointMovementGenerator<Creature>* newWPMMgen = new WaypointMovementGenerator<Creature>(*creature);
        Mutate(newWPMMgen);
        newWPMMgen->InitializeWaypointPath(*creature, id, (WaypointPathOrigin)source, initialDelay, overwriteEntry);
    }
    else
    {
        sLog.outError("Non-creature %s attempt to MoveWaypoint()", m_owner->GetGuidStr().c_str());
    }
}

开发者ID:HerrTrigger，项目名称:mangos-wotlk，代码行数:22，代码来源:MotionMaster.cpp

示例10: Mutate

int CONTROLLER::Mutate_Biased(double mutationProbability) {

	int mutationOccurred = false;

	for (int i=0; i<numTimeSteps; i++) {

		for (int j=0; j<numMotorGroups; j++) {

			if ( Rand(0,1) < mutationProbability ) {

				Mutate(i,j);

				mutationOccurred = true;
			}
		}
	}

	motors->Print();
	printf("\n");

	return( mutationOccurred );
}

开发者ID:jbongard，项目名称:cords，代码行数:22，代码来源:controller.cpp

示例11: Crossover

//! Reproduce candidates to create the next generation.
void CNE::Reproduce()
{
  // Sort fitness values. Smaller fitness value means better performance.
  index = arma::sort_index(fitnessValues);

  // First parent.
  size_t mom;

  // Second parent.
  size_t dad;

  for (size_t i = numElite; i < populationSize - 1; i++)
  {
    // Select 2 different parents from elite group randomly [0, numElite).
    mom = mlpack::math::RandInt(0, numElite);
    dad = mlpack::math::RandInt(0, numElite);

    // Making sure both parents are not the same.
    if (mom == dad)
    {
      if (dad != numElite - 1)
      {
        dad++;
      }
      else
      {
        dad--;
      }
    }

    // Parents generate 2 children replacing the dropped-out candidates.
    // Also finding the index of these candidates in the population matrix.
    Crossover(index[mom], index[dad], index[i], index[i + 1]);
  }

  // Mutating the weights with small noise values.
  // This is done to bring change in the next generation.
  Mutate();
}

开发者ID:sbrodehl，项目名称:mlpack，代码行数:40，代码来源:cne_impl.hpp

示例12: point

void MotionMaster::MoveJump(float x, float y, float z, float speedXY, float speedZ, uint32 id)
{
    sLog->outDebug(LOG_FILTER_GENERAL, "Unit (GUID: %u) jump to point (X: %f Y: %f Z: %f)", _owner->GetGUIDLow(), x, y, z);

	if (speedXY <= 0.1f)
		return;

    float moveTimeHalf = speedZ / Movement::gravity;
    float max_height = -Movement::computeFallElevation(moveTimeHalf, false, -speedZ);

    int32 timerToDestination = 0;

    Movement::MoveSplineInit init(_owner);
    init.MoveTo(x, y, z, false);
    init.SetParabolic(max_height, 0);
    init.SetVelocity(speedXY);
    timerToDestination = init.Launch();

    if (_owner->ToPlayer())
        _owner->ToPlayer()->SetJumpTimerDestination(timerToDestination + 100);

    Mutate(new EffectMovementGenerator(id), MOTION_SLOT_CONTROLLED);
}

开发者ID:Jildor，项目名称:4.3.4-Core，代码行数:23，代码来源:MotionMaster.cpp

示例13: DEBUG_LOG

void
MotionMaster::MoveTaxiFlight(uint32 path, uint32 pathnode)
{
    if(i_owner->GetTypeId()==TYPEID_PLAYER)
    {
        if(path < sTaxiPathNodesByPath.size())
        {
            DEBUG_LOG("Player (GUID: %u) taxi to (Path %u node %u)", i_owner->GetGUIDLow(), path, pathnode);
            FlightPathMovementGenerator* mgen = new FlightPathMovementGenerator(sTaxiPathNodesByPath[path],pathnode);
            Mutate(mgen);
        }
        else
        {
           sLog.outError("Creature (Entry: %u GUID: %u) attempt taxi to (Path %u node %u)",
            i_owner->GetEntry(), i_owner->GetGUIDLow(), path, pathnode );
        }
    }
    else
    {
        sLog.outError("%u attempt taxi to (Path %u node %u)",
            i_owner->GetGUIDLow(), path, pathnode );
    }
}

开发者ID:AwkwardDev，项目名称:MangosFX，代码行数:23，代码来源:MotionMaster.cpp

示例14: DEBUG_LOG

void
MotionMaster::MoveTaxiFlight(uint32 path, uint32 pathnode)
{
    if(i_owner->GetTypeId()==TYPEID_PLAYER)
    {
        if(path < sTaxiPathNodesByPath.size())
        {
            DEBUG_LOG("%s taxi to (Path %u node %u)", i_owner->GetObjectGuid().GetString().c_str(), path, pathnode);
            FlightPathMovementGenerator* mgen = new FlightPathMovementGenerator(sTaxiPathNodesByPath[path],pathnode);
            Mutate(mgen);
        }
        else
        {
            sLog.outError("%s attempt taxi to (not existed Path %u node %u)",
                i_owner->GetObjectGuid().GetString().c_str(), path, pathnode );
        }
    }
    else
    {
        sLog.outError("%s attempt taxi to (Path %u node %u)",
            i_owner->GetObjectGuid().GetString().c_str(), path, pathnode );
    }
}

开发者ID:Bootz，项目名称:diamondcore，代码行数:23，代码来源:MotionMaster.cpp

示例15: TC_LOG_DEBUG

void MotionMaster::MoveTaxiFlight(uint32 path, uint32 pathnode)
{
    if (_owner->GetTypeId() == TYPEID_PLAYER)
    {
        if (path < sTaxiPathNodesByPath.size())
        {
            TC_LOG_DEBUG("misc", "%s taxi to (Path %u node %u).", _owner->GetName().c_str(), path, pathnode);
            FlightPathMovementGenerator* mgen = new FlightPathMovementGenerator(pathnode);
            mgen->LoadPath(_owner->ToPlayer());
            Mutate(mgen, MOTION_SLOT_CONTROLLED);
        }
        else
        {
            TC_LOG_ERROR("misc", "%s attempted taxi to (non-existing Path %u node %u).",
            _owner->GetName().c_str(), path, pathnode);
        }
    }
    else
    {
        TC_LOG_ERROR("misc", "Creature (Entry: %u GUID: %u) attempted taxi to (Path %u node %u).",
            _owner->GetEntry(), _owner->GetGUID().GetCounter(), path, pathnode);
    }
}

开发者ID:martial69320，项目名称:cerberus，代码行数:23，代码来源:MotionMaster.cpp

示例16: top

void MotionMaster::MovePath(uint32 path_id, bool repeatable)
{
    if (!path_id)
        return;
    //We set waypoint movement as new default movement generator
    // clear ALL movement generators (including default)
    /*while (!empty())
    {
        MovementGenerator *curr = top();
        curr->Finalize(*i_owner);
        pop();
        if (!isStatic(curr))
            delete curr;
    }*/

    //i_owner->GetTypeId() == TYPEID_PLAYER ?
        //Mutate(new WaypointMovementGenerator<Player>(path_id, repeatable)):
    Mutate(new WaypointMovementGenerator<Creature>(path_id, repeatable), MOTION_SLOT_IDLE);

    sLog->outStaticDebug("%s (GUID: %u) start moving over path(Id:%u, repeatable: %s)",
        _owner->GetTypeId() == TYPEID_PLAYER ? "Player" : "Creature",
        _owner->GetGUIDLow(), path_id, repeatable ? "YES" : "NO");
}

开发者ID:Bluedead，项目名称:SkyFireEMU，代码行数:23，代码来源:MotionMaster.cpp

示例17: TC_LOG_DEBUG

void MotionMaster::MoveFall(uint32 id/*=0*/)
{
    // use larger distance for vmap height search than in most other cases
    float tz = _owner->GetMap()->GetHeight(_owner->GetPhaseMask(), _owner->GetPositionX(), _owner->GetPositionY(), _owner->GetPositionZ(), true, MAX_FALL_DISTANCE);;

    // try to find ground Z
    if (tz <= INVALID_HEIGHT)
        tz = _owner->GetMap()->GetHeight(_owner->GetPhaseMask(), _owner->GetPositionX(), _owner->GetPositionY(), MAX_HEIGHT, true, MAX_FALL_DISTANCE);

    if (tz <= INVALID_HEIGHT)
    {
        TC_LOG_DEBUG("misc", "MotionMaster::MoveFall: unable retrive a proper height at map %u (x: %f, y: %f, z: %f).",
            _owner->GetMap()->GetId(), _owner->GetPositionX(), _owner->GetPositionX(), _owner->GetPositionZ());
        return;
    }

    // Abort too if the ground is very near
    if (fabs(_owner->GetPositionZ() - tz) < 0.1f)
        return;

    if (_owner->GetTypeId() == TYPEID_PLAYER)
    {
        _owner->AddUnitMovementFlag(MOVEMENTFLAG_FALLING);
        _owner->m_movementInfo.SetFallTime(0);
    }
    
    Position pos = _owner->GetPosition();
    pos.m_positionZ = tz;
    _owner->GetFirstCollisionPosition(pos, fabs(_owner->GetPositionZ() - tz), 0);
    tz = pos.GetPositionZ();

    Movement::MoveSplineInit init(_owner);
    init.MoveTo(_owner->GetPositionX(), _owner->GetPositionY(), tz);
    init.SetFall();
    init.Launch();
    Mutate(new EffectMovementGenerator(id), MOTION_SLOT_CONTROLLED);
}

开发者ID:Exodius，项目名称:chuspi，代码行数:37，代码来源:MotionMaster.cpp

示例18: float

void MotionMaster::MoveCirclePath(float x, float y, float z, float radius, bool clockwise, uint8 stepCount)
{
    float step = 2 * float(M_PI) / stepCount * (clockwise ? -1.0f : 1.0f);
    Position const& pos = { x, y, z, 0.0f };
    float angle = pos.GetAbsoluteAngle(_owner->GetPositionX(), _owner->GetPositionY());

    Movement::MoveSplineInit init(_owner);

    for (uint8 i = 0; i < stepCount; angle += step, ++i)
    {
        G3D::Vector3 point;
        point.x = x + radius * cosf(angle);
        point.y = y + radius * sinf(angle);

        if (_owner->IsFlying())
            point.z = z;
        else
            point.z = _owner->GetMapHeight(point.x, point.y, z) + _owner->GetHoverOffset();

        init.Path().push_back(point);
    }

    if (_owner->IsFlying())
    {
        init.SetFly();
        init.SetCyclic();
        init.SetAnimation(Movement::ToFly);
    }
    else
    {
        init.SetWalk(true);
        init.SetCyclic();
    }

    Mutate(new GenericMovementGenerator(std::move(init), EFFECT_MOTION_TYPE, 0), MOTION_SLOT_ACTIVE);
}

开发者ID:m-uu，项目名称:ElunaTrinityWotlk，代码行数:36，代码来源:MotionMaster.cpp

示例19: TC_LOG_DEBUG

void MotionMaster::MoveFall(uint32 id /*=0*/)
{
    // use larger distance for vmap height search than in most other cases
    float tz = _owner->GetMap()->GetHeight(_owner->GetPhaseMask(), _owner->GetPositionX(), _owner->GetPositionY(), _owner->GetPositionZ(), true, MAX_FALL_DISTANCE);
    if (tz <= INVALID_HEIGHT)
    {
        TC_LOG_DEBUG("misc", "MotionMaster::MoveFall: unable retrive a proper height at map %u (x: %f, y: %f, z: %f).",
                     _owner->GetMap()->GetId(), _owner->GetPositionX(), _owner->GetPositionY(), _owner->GetPositionZ());
        return;
    }

    // Abort too if the ground is very near
    if (std::fabs(_owner->GetPositionZ() - tz) < 0.1f)
        return;

    if (_owner->GetTypeId() == TYPEID_PLAYER)
        _owner->SetFall(true);

    Movement::MoveSplineInit init(_owner);
    init.MoveTo(_owner->GetPositionX(), _owner->GetPositionY(), tz, false);
    init.SetFall();
    init.Launch();
    Mutate(new EffectMovementGenerator(id), MOTION_SLOT_CONTROLLED);
}

开发者ID:alex1kiss，项目名称:LegacyCore_6.x.x，代码行数:24，代码来源:MotionMaster.cpp

示例20: ReadHeader

void MP4ContentIdDescriptor::Read(MP4File* pFile)
{
	ReadHeader(pFile);

	/* read the first property, 'compatiblity' */
	ReadProperties(pFile, 0, 1);

	/* if compatiblity != 0 */
	if (((MP4Integer8Property*)m_pProperties[0])->GetValue() != 0) {
		/* we don't understand it */
		VERBOSE_READ(pFile->GetVerbosity(),
			printf("incompatible content id descriptor\n"));
		return;
	}

	/* read the next four properties */
	ReadProperties(pFile, 1, 4);

	/* which allows us to reconfigure ourselves */
	Mutate();

	/* read the remaining properties */
	ReadProperties(pFile, 5);
}

开发者ID:hellowangh，项目名称:avs-transcoder，代码行数:24，代码来源:descriptors.cpp

注：本文中的Mutate函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MutexLock函数代码示例发布时间：2022-05-30

C++ MurmurHash3_x86_32函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18210|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9656|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8168|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8418|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8403|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ Mutate函数代码示例

示例1: init

示例2: init

示例3: init

示例4: FlightPathMovementGenerator

示例5: DEBUG_FILTER_LOG

示例6: DEBUG_FILTER_LOG

示例7: top

示例8: to

示例9: MoveWaypoint

示例10: Mutate

示例11: Crossover

示例12: point

示例13: DEBUG_LOG

示例14: DEBUG_LOG

示例15: TC_LOG_DEBUG

示例16: top

示例17: TC_LOG_DEBUG

示例18: float

示例19: TC_LOG_DEBUG

示例20: ReadHeader

请发表评论

全部评论

上一篇：

下一篇：

OsbertWang/install-latex-guide-zh-cn: 一

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053