本文整理汇总了C++中NAS_ERROR_LOG函数的典型用法代码示例。如果您正苦于以下问题：C++ NAS_ERROR_LOG函数的具体用法？C++ NAS_ERROR_LOG怎么用？C++ NAS_ERROR_LOG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了NAS_ERROR_LOG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: NAS_MMC_RcvLmmSysCfgCnfExpired_SysCfg_WaitLmmSysCfgCnf
VOS_UINT32 NAS_MMC_RcvLmmSysCfgCnfExpired_SysCfg_WaitLmmSysCfgCnf(
VOS_UINT32 ulEventType,
struct MsgCB *pstMsg
)
{
NAS_MML_PLMN_RAT_PRIO_STRU *pstPrePrioRatList;
/* 打印定时器超时异常LOG */
NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_RcvLmmSysCfgCnfExpired_SysCfg_WaitLmmSysCfgCnf():TI_NAS_MMC_WAIT_LMM_SYSCFG_CNF timeout");
/* 向MMA回复SYSCFG设置失败 */
NAS_MMC_SndMmaSysCfgCnf(MMA_MMC_SYS_CFG_SET_FAILURE_OTHER);
/* syscfg设置失败需要恢复之前的接入技术和优先级 */
pstPrePrioRatList = NAS_MMC_GetPrePrioRatList_SysCfg();
NAS_MML_SetMsSysCfgPrioRatList(pstPrePrioRatList);
/* 通知上层状态机SYSCFG状态机运行结果,syscfg设置失败 */
NAS_MMC_SndSysCfgRslt(VOS_FALSE, VOS_FALSE);
/* 退出SYSCFG状态机 */
NAS_MMC_FSM_QuitFsmL2();
return VOS_TRUE;
}
开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:26，代码来源:NasMmcFsmSyscfg.c
示例2: NAS_MMC_SndMmCoverageLostInd
VOS_VOID NAS_MMC_SndMmCoverageLostInd(VOS_VOID)
{
MMCMM_COVERAGE_LOST_IND_STRU *pstSndMsg = VOS_NULL_PTR;
/* 从内部消息队列中获取一个还没有使用的空间 */
pstSndMsg = (MMCMM_COVERAGE_LOST_IND_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMCMM_COVERAGE_LOST_IND_STRU));
if ( VOS_NULL_PTR == pstSndMsg)
{
NAS_ERROR_LOG(WUEPS_PID_MMC,"NAS_MMC_SndMmCoverageLostInd:ERROR: Memory Alloc Error for pMsg");
return;
}
pstSndMsg->MsgHeader.ulSenderCpuId = VOS_LOCAL_CPUID;
pstSndMsg->MsgHeader.ulSenderPid = WUEPS_PID_MMC;
pstSndMsg->MsgHeader.ulReceiverCpuId = VOS_LOCAL_CPUID;
pstSndMsg->MsgHeader.ulReceiverPid = WUEPS_PID_MM;
pstSndMsg->MsgHeader.ulLength
= sizeof(MMCMM_COVERAGE_LOST_IND_STRU) - VOS_MSG_HEAD_LENGTH;
/* 填写消息类别 */
pstSndMsg->MsgHeader.ulMsgName = MMCMM_COVERAGE_LOST_IND;
/* 内部消息的发送 */
NAS_MML_SndInternalMsg(pstSndMsg);
return;
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:29，代码来源:NasMmcSndMm.c
示例3: NAS_MMC_SndMmPlmnSchInit
VOS_VOID NAS_MMC_SndMmPlmnSchInit(VOS_VOID)
{
/*向MM发送挂起指示,定义原语类型指针 */
MMCMM_PLMN_SEARCH_INITIATED_STRU *pstSndMsg = VOS_NULL_PTR;
/* 从内部消息队列中获取一个还没有使用的空间 */
pstSndMsg = (MMCMM_PLMN_SEARCH_INITIATED_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMCMM_PLMN_SEARCH_INITIATED_STRU));
if ( VOS_NULL_PTR == pstSndMsg)
{
NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_SndMmPlmnSchInit:ALLOC MEM ERROR!");
return;
}
pstSndMsg->MsgHeader.ulSenderCpuId = VOS_LOCAL_CPUID;
pstSndMsg->MsgHeader.ulSenderPid = WUEPS_PID_MMC;
pstSndMsg->MsgHeader.ulReceiverCpuId = VOS_LOCAL_CPUID;
pstSndMsg->MsgHeader.ulReceiverPid = WUEPS_PID_MM;
pstSndMsg->MsgHeader.ulLength
= sizeof(MMCMM_PLMN_SEARCH_INITIATED_STRU) - VOS_MSG_HEAD_LENGTH;
/* 填写消息类别 */
pstSndMsg->MsgHeader.ulMsgName = MMCMM_PLMN_SEARCH_INITIATED;
/* 内部消息的发送 */
NAS_MML_SndInternalMsg(pstSndMsg);
return;
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:28，代码来源:NasMmcSndMm.c
示例4: NAS_MMC_SndMmLmmTimerStateNotify
VOS_VOID NAS_MMC_SndMmLmmTimerStateNotify(
LMM_MMC_TIMER_STATE_NOTIFY_STRU *pstTimerStatusNotify
)
{
MMCMM_LMM_TIMER_STATE_NOTIFY_STRU *pstMsg = VOS_NULL_PTR;
/* 申请消息内存分配 */
pstMsg = (MMCMM_LMM_TIMER_STATE_NOTIFY_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMCMM_LMM_TIMER_STATE_NOTIFY_STRU));
if ( VOS_NULL_PTR == pstMsg)
{
NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_SndMmLmmTimerStatusNotify,ERROR:ALLOC BUFFER WRONG!");
return;
}
/* 消息IE项赋值 */
PS_MEM_CPY(pstMsg, pstTimerStatusNotify, sizeof(MMCMM_LMM_TIMER_STATE_NOTIFY_STRU));
/* 修改消息头 */
pstMsg->ulLength = sizeof(MMCMM_LMM_TIMER_STATE_NOTIFY_STRU)
-VOS_MSG_HEAD_LENGTH;
pstMsg->ulSenderCpuId = VOS_LOCAL_CPUID;
pstMsg->ulSenderPid = WUEPS_PID_MMC;
pstMsg->ulReceiverCpuId = VOS_LOCAL_CPUID;
pstMsg->ulReceiverPid = WUEPS_PID_MM;
pstMsg->ulMsgId = MMCMM_LMM_TIMER_STATE_NOTIFY;
/* 内部消息的发送 */
NAS_MML_SndInternalMsg(pstMsg);
return;
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:32，代码来源:NasMmcSndMm.c
示例5: NAS_MMC_SndMmRelReq
VOS_VOID NAS_MMC_SndMmRelReq(VOS_VOID)
{
/* 向MM发送CS信令链接释放消息 */
MMCMM_REL_REQ_STRU *pstSndMmRelMsg = VOS_NULL_PTR;
pstSndMmRelMsg = (MMCMM_REL_REQ_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMCMM_REL_REQ_STRU));
if ( VOS_NULL_PTR == pstSndMmRelMsg)
{
NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_SndMmRelReq,ERROR:ALLOC BUFFER WRONG!");
return;
}
pstSndMmRelMsg->MsgHeader.ulSenderCpuId = VOS_LOCAL_CPUID;
pstSndMmRelMsg->MsgHeader.ulSenderPid = WUEPS_PID_MMC;
pstSndMmRelMsg->MsgHeader.ulReceiverCpuId = VOS_LOCAL_CPUID;
pstSndMmRelMsg->MsgHeader.ulReceiverPid = WUEPS_PID_MM;
/* 填写消息类别 */
pstSndMmRelMsg->MsgHeader.ulMsgName = MMCMM_REL_REQ;
pstSndMmRelMsg->MsgHeader.ulLength = sizeof(MMCMM_REL_REQ_STRU) - VOS_MSG_HEAD_LENGTH;
/* 内部消息的发送 */
NAS_MML_SndInternalMsg(pstSndMmRelMsg);
return;
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:25，代码来源:NasMmcSndMm.c
示例6: NAS_MMC_SndGmmLteSysinfoInd
VOS_VOID NAS_MMC_SndGmmLteSysinfoInd(
LMM_MMC_SYS_INFO_IND_STRU *pstLmmSysInfoMsg
)
{
/* 定义原语类型指针 */
MMC_GMM_LTE_SYS_INFO_IND_STRU *pstMsg = VOS_NULL_PTR;
pstMsg = (MMC_GMM_LTE_SYS_INFO_IND_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMC_GMM_LTE_SYS_INFO_IND_STRU));
if ( VOS_NULL_PTR == pstMsg)
{
NAS_ERROR_LOG(WUEPS_PID_MMC,"NAS_MMC_SndGmmLteSysinfoInd:Alloc Mem Failed");
return;
}
/* 消息IE项赋值 */
PS_MEM_CPY(pstMsg, pstLmmSysInfoMsg, sizeof(MMC_GMM_LTE_SYS_INFO_IND_STRU));
pstMsg->ulSenderCpuId = VOS_LOCAL_CPUID;
pstMsg->ulSenderPid = WUEPS_PID_MMC;
pstMsg->ulReceiverCpuId = VOS_LOCAL_CPUID;
pstMsg->ulReceiverPid = WUEPS_PID_GMM;
pstMsg->ulMsgId = MMCGMM_LTE_SYS_INFO_IND;
pstMsg->ulLength = sizeof(MMC_GMM_LTE_SYS_INFO_IND_STRU) - VOS_MSG_HEAD_LENGTH;
/* 内部消息的发送 */
NAS_MML_SndInternalMsg(pstMsg);
return ;
}
开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:29，代码来源:NasMmcSndGmm.c
示例7: NAS_MMC_SndGmmRelReq
VOS_VOID NAS_MMC_SndGmmRelReq(VOS_VOID)
{
/* 向GMM发送PS信令链接释放消息 */
MMCGMM_REL_REQ_STRU *pstSndGmmRelMsg = VOS_NULL_PTR;
/* 从内部消息队列中获取一个还没有使用的空间 */
pstSndGmmRelMsg = (MMCGMM_REL_REQ_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMCGMM_REL_REQ_STRU));
if ( VOS_NULL_PTR == pstSndGmmRelMsg )
{
NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_SndGmmRelReq:ALLOC MEM ERROR!");
return;
}
pstSndGmmRelMsg->MsgHeader.ulSenderCpuId = VOS_LOCAL_CPUID;
pstSndGmmRelMsg->MsgHeader.ulSenderPid = WUEPS_PID_MMC;
pstSndGmmRelMsg->MsgHeader.ulReceiverCpuId = VOS_LOCAL_CPUID;
pstSndGmmRelMsg->MsgHeader.ulReceiverPid = WUEPS_PID_GMM;
/* 填写消息类别 */
pstSndGmmRelMsg->MsgHeader.ulMsgName = MMCGMM_REL_REQ;
pstSndGmmRelMsg->MsgHeader.ulLength = sizeof(MMCGMM_REL_REQ_STRU) - VOS_MSG_HEAD_LENGTH;
/* 内部消息的发送 */
NAS_MML_SndInternalMsg(pstSndGmmRelMsg);
return;
}
开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:28，代码来源:NasMmcSndGmm.c
示例8: NAS_MMC_SndGmmLmmAttachInd
VOS_VOID NAS_MMC_SndGmmLmmAttachInd(
LMM_MMC_ATTACH_IND_STRU *pstAttachInd
)
{
MMCGMM_LMM_ATTACH_IND_STRU *pstMsg = VOS_NULL_PTR;
pstMsg = (MMCGMM_LMM_ATTACH_IND_STRU *)NAS_MML_GetIntMsgSendBuf(sizeof(MMCGMM_LMM_ATTACH_IND_STRU));
if ( VOS_NULL_PTR == pstMsg)
{
NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_SndGmmLmmAttachInd,ERROR:ALLOC BUFFER WRONG!");
return;
}
/* 消息IE项赋值 */
PS_MEM_CPY(pstMsg, pstAttachInd, sizeof(MMCGMM_LMM_ATTACH_IND_STRU));
/* 修改消息头 */
pstMsg->ulLength = sizeof(MMCGMM_LMM_ATTACH_IND_STRU)
-VOS_MSG_HEAD_LENGTH;
pstMsg->ulSenderCpuId = VOS_LOCAL_CPUID;
pstMsg->ulSenderPid = WUEPS_PID_MMC;
pstMsg->ulReceiverCpuId = VOS_LOCAL_CPUID;
pstMsg->ulReceiverPid = WUEPS_PID_GMM;
pstMsg->ulMsgId = MMCGMM_LMM_ATTACH_IND;
/* 内部消息的发送 */
NAS_MML_SndInternalMsg(pstMsg);
return;
}
开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:31，代码来源:NasMmcSndGmm.c
示例9: NAS_ERROR_LOG
NAS_MML_INTERNAL_MSG_BUF_STRU *NAS_MML_GetIntMsgSendBuf(
VOS_UINT32 ulLen
)
{
NAS_MML_INTERNAL_MSG_BUF_STRU *pstNasMmlMsg = VOS_NULL_PTR;
NAS_MML_INTERNAL_MSG_QUEUE_STRU *pstInternalMsgQueue = VOS_NULL_PTR;
pstInternalMsgQueue = &(NAS_MML_GetMmlCtx()->stInternalMsgQueue);
/* 从上下文中获取消息缓冲区指针 */
pstNasMmlMsg = ( NAS_MML_INTERNAL_MSG_BUF_STRU *)&(pstInternalMsgQueue->stSendMsgBuf);
if ( ulLen > NAS_MML_MAX_INTERNAL_MSG_LEN )
{
NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MML_GetIntMsgSendBuf: Buffer full" );
NAS_MMC_SndOmInternalMsgQueueInfo(VOS_FALSE, VOS_TRUE);
return VOS_NULL_PTR;
}
/* 清空这个消息缓冲单元 */
PS_MEM_SET(pstNasMmlMsg, 0x00, sizeof(NAS_MML_INTERNAL_MSG_BUF_STRU));
/* 返回缓冲区指针 */
return pstNasMmlMsg;
}
开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:25，代码来源:NasMmlMsgProc.c
示例10: NAS_SM_SndRabmBearerModifyInd
VOS_UINT32 NAS_SM_SndRabmBearerModifyInd(
VOS_UINT8 ucNsapi,
NAS_SM_PDP_CONTEXT_INFO_STRU *pstPdpCtxInfo
)
{
SM_RABM_BEARER_MODIFY_IND_STRU *pstBearerModifyInd;
/* 构造消息 */
pstBearerModifyInd = (SM_RABM_BEARER_MODIFY_IND_STRU*)PS_ALLOC_MSG_WITH_HEADER_LEN(
WUEPS_PID_SM,
sizeof(SM_RABM_BEARER_MODIFY_IND_STRU));
if (VOS_NULL_PTR == pstBearerModifyInd)
{
NAS_ERROR_LOG(WUEPS_PID_SM,
"NAS_SM_SndRabmBearerModifyInd: Memory alloc failed.");
return VOS_ERR;
}
/* 初始化消息 */
PS_MEM_SET((VOS_CHAR*)pstBearerModifyInd + VOS_MSG_HEAD_LENGTH,
0x00,
sizeof(SM_RABM_BEARER_MODIFY_IND_STRU) - VOS_MSG_HEAD_LENGTH);
/* 填写消息头 */
pstBearerModifyInd->stMsgHeader.ulReceiverCpuId = VOS_LOCAL_CPUID;
pstBearerModifyInd->stMsgHeader.ulReceiverPid = WUEPS_PID_RABM;
pstBearerModifyInd->stMsgHeader.ulMsgName = ID_SM_RABM_BEARER_MODIFY_IND;
/* 填写消息内容 */
pstBearerModifyInd->ulNsapi = ucNsapi;
pstBearerModifyInd->stQos.ulLength = pstPdpCtxInfo->QoS.ulQosLength;
PS_MEM_CPY(pstBearerModifyInd->stQos.aucQosValue,
pstPdpCtxInfo->QoS.aucQosValue,
pstPdpCtxInfo->QoS.ulQosLength);
/* 发送消息 */
if (VOS_OK != PS_SEND_MSG(WUEPS_PID_SM, pstBearerModifyInd))
{
NAS_ERROR_LOG(WUEPS_PID_SM,
"NAS_SM_SndRabmBearerModifyInd: Send message failed.");
return VOS_ERR;
}
return VOS_OK;
}
开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:47，代码来源:NasSmMultiMode.c
示例11: MN_CALL_CsMtCallFailRecord
VOS_VOID MN_CALL_CsMtCallFailRecord(
NAS_ERR_LOG_CS_MT_CALL_CAUSE_ENUM_U32 enCause
)
{
NAS_ERR_LOG_CS_MT_CALL_FAIL_EVENT_STRU stCsMtCallFailEvt;
VOS_UINT32 ulLength;
VOS_UINT16 usLevel;
VOS_UINT32 ulIsLogRecord;
VOS_UINT32 ulResult;
/* 查询对应Alarm Id是否需要记录异常信息 */
usLevel = NAS_GetErrLogAlmLevel(NAS_ERR_LOG_ALM_CS_MT_CALL_FAIL);
ulIsLogRecord = TAF_SDC_IsErrLogNeedRecord(usLevel);
/* 模块异常不需要记录或异常原因值不需要记录时，不保存异常信息 */
if (VOS_FALSE == ulIsLogRecord)
{
return;
}
ulLength = sizeof(NAS_ERR_LOG_CS_MT_CALL_FAIL_EVENT_STRU);
/* 填充CS PAGING失败异常信息 */
PS_MEM_SET(&stCsMtCallFailEvt, 0x00, ulLength);
NAS_COMM_BULID_ERRLOG_HEADER_INFO(&stCsMtCallFailEvt.stHeader,
VOS_GetModemIDFromPid(WUEPS_PID_TAF),
NAS_ERR_LOG_ALM_CS_MT_CALL_FAIL,
usLevel,
VOS_GetSlice(),
(ulLength - sizeof(OM_ERR_LOG_HEADER_STRU)));
/* 获取当前位置信息 */
NAS_MNTN_OutputPositionInfo(&stCsMtCallFailEvt.stPositionInfo);
/* 填写错误原因值 */
stCsMtCallFailEvt.enCause = enCause;
/* 将CS MT CALL失败信息发送给ACPU OM模块 */
TAF_SndAcpuOmFaultErrLogInd(&stCsMtCallFailEvt, ulLength);
/*
将异常信息写入Buffer中
实际写入的字符数与需要写入的不等则打印异常
*/
ulResult = TAF_SDC_PutErrLogRingBuf((VOS_CHAR *)&stCsMtCallFailEvt, ulLength);
if (ulResult != ulLength)
{
NAS_ERROR_LOG(WUEPS_PID_TAF, "MN_CALL_SndAcpuOmCsMtCallFailInd(): Push buffer error.");
}
/* 可维可测勾包 */
NAS_COM_MntnPutRingbuf(NAS_ERR_LOG_ALM_CS_MT_CALL_FAIL,
WUEPS_PID_TAF,
(VOS_UINT8 *)&stCsMtCallFailEvt,
sizeof(stCsMtCallFailEvt));
return;
}
开发者ID:magnusjjj，项目名称:android_kernel_huawei_rle，代码行数:59，代码来源:MnCall.c
示例12: NAS_SM_RcvTafBearerModifyInd
VOS_VOID NAS_SM_RcvTafBearerModifyInd(
SMREG_BEARER_MODIFY_IND_STRU *pstBearerModifyInd
)
{
NAS_SM_PDP_CONTEXT_INFO_STRU *pstPdpCtxInfo;
VOS_UINT8 ucPdpCtxIndex;
VOS_UINT8 ucTi;
VOS_UINT8 ucNsapi;
/*----------------------------------------------------------------
提取TI: 根据TiFlag决定TI的取值范围, 以网侧下发TI为准
若TiFlag为TRUE(SM_TI_MS_ORG), TI取值区间[128, 254]
若TiFlag为FALSE(SM_TI_NET_ORG), TI取值区间[0, 127]
----------------------------------------------------------------*/
ucTi = (VOS_FALSE == pstBearerModifyInd->stTransId.ucTiFlag) ?
(pstBearerModifyInd->stTransId.ucTiValue) :
(pstBearerModifyInd->stTransId.ucTiValue + 0x80);
/* 获取TI对应的PDP CONTEXT索引 */
ucPdpCtxIndex = NAS_SM_GetNsapiFromTiMap(ucTi);
/* 检查是否存在和TI和CR对应的PDP CONTEXT */
if (0xFF == ucPdpCtxIndex)
{
NAS_ERROR_LOG(WUEPS_PID_SM,
"NAS_SM_RcvTafBearerModifyInd: NSAPI is not used.");
return;
}
/* 获取PDP CONTEXT索引对应的NSAPI: NSAPI = PDP_INDEX - NSAPI_OFFSET(5) */
ucNsapi = ucPdpCtxIndex + SM_NSAPI_OFFSET;
/* 获取当前PDP CONTEXT内容地址 */
pstPdpCtxInfo = NAS_SM_GetPdpCtxInfoAddr(ucPdpCtxIndex);
/* 更新RADIO PRIORITY */
if (VOS_TRUE == pstBearerModifyInd->bitOpRadioPriority)
{
pstPdpCtxInfo->ucRadioPri = pstBearerModifyInd->ucRadioPriority;
}
/* 更新QOS信息 */
if (VOS_TRUE == pstBearerModifyInd->bitOpPdpQos)
{
pstPdpCtxInfo->QoS.ulQosLength = pstBearerModifyInd->stNegQos.ulQosLen;
PS_MEM_CPY(pstPdpCtxInfo->QoS.aucQosValue,
pstBearerModifyInd->stNegQos.aucQos,
NAS_SM_MAX_QOS_LEN);
}
/* 通知RABM更新状态 */
NAS_SM_SndRabmBearerModifyInd(ucNsapi, pstPdpCtxInfo);
/* 通知GMM pdp上下文发生修改，GMM根据此消息需判断是否要去激活ISR */
NAS_SM_SndGmmPdpModifyInd(ucNsapi);
}
开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:58，代码来源:NasSmMultiMode.c
示例13: NAS_MMC_SetRatModeSysCfgReq_SysCfg
VOS_VOID NAS_MMC_SetRatModeSysCfgReq_SysCfg(
NAS_MML_NET_RAT_TYPE_ENUM_UINT8 enCurrRat,
MMA_MMC_SYS_CFG_SET_REQ_STRU *pstSysCfgMsg
)
{
/* 根据接入模式，进行SYSCFG的设置 */
switch ( enCurrRat )
{
#if (FEATURE_ON == FEATURE_LTE)
case NAS_MML_NET_RAT_TYPE_LTE:
/* 向L模下发SYSCFG设置请求 */
NAS_MMC_SndLmmSyscfgReq(pstSysCfgMsg);
NAS_MMC_AddSysCfgIndex_SysCfg();
/* 进行SYSCFG状态机的子状态的迁移 */
NAS_MMC_FSM_SetCurrState(NAS_MMC_SYSCFG_STA_WAIT_LMM_SYSCFG_CNF);
/* 启动等待回复定时器 */
NAS_MMC_StartTimer(TI_NAS_MMC_WAIT_LMM_SYSCFG_CNF, TI_NAS_MMC_WAIT_LMM_SYSCFG_CNF_LEN);
break;
#endif
case NAS_MML_NET_RAT_TYPE_WCDMA:
/* 向W模下发SYSCFG设置请求 */
NAS_MMC_SndAsSyscfgReq(pstSysCfgMsg, WUEPS_PID_WRR);
NAS_MMC_AddSysCfgIndex_SysCfg();
/* 进行SYSCFG状态机的子状态的迁移 */
NAS_MMC_FSM_SetCurrState(NAS_MMC_SYSCFG_STA_WAIT_WAS_SYSCFG_CNF);
/* 启动等待回复定时器 */
NAS_MMC_StartTimer(TI_NAS_MMC_WAIT_WAS_SYSCFG_CNF, TI_NAS_MMC_WAIT_WAS_SYSCFG_CNF_LEN);
break;
case NAS_MML_NET_RAT_TYPE_GSM:
/* 向G模下发SYSCFG设置请求 */
NAS_MMC_SndAsSyscfgReq(pstSysCfgMsg, UEPS_PID_GAS);
NAS_MMC_AddSysCfgIndex_SysCfg();
/* 进行SYSCFG状态机的子状态的迁移 */
NAS_MMC_FSM_SetCurrState(NAS_MMC_SYSCFG_STA_WAIT_GAS_SYSCFG_CNF);
/* 启动等待回复定时器 */
NAS_MMC_StartTimer(TI_NAS_MMC_WAIT_GAS_SYSCFG_CNF, TI_NAS_MMC_WAIT_GAS_SYSCFG_CNF_LEN);
break;
default:
NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_MMC_SetRatModeSysCfgReq_SysCfg():Invalid net rat type");
break;
}
return;
}
开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:57，代码来源:NasMmcFsmSyscfg.c
示例14: MN_CALL_CsCallDiscInfoRecord
VOS_VOID MN_CALL_CsCallDiscInfoRecord(
MN_CALL_ID_T ucCallId,
NAS_ERR_LOG_CS_MT_CALL_CAUSE_ENUM_U32 enCause
)
{
NAS_ERR_LOG_PROCESS_INFO_IND_EVENT_STRU stProcInfoEvent;
VOS_UINT32 ulLength;
VOS_UINT16 usLevel;
VOS_UINT32 ulIsLogRecord;
VOS_UINT32 ulResult;
/* 查询对应Alarm Id是否需要记录异常信息 */
usLevel = NAS_GetErrLogAlmLevel(NAS_ERR_LOG_ALM_PORCESS_INFO_IND);
ulIsLogRecord = TAF_SDC_IsErrLogNeedRecord(usLevel);
/* 模块异常不需要记录或异常原因值不需要记录时，不保存异常信息 */
if (VOS_FALSE == ulIsLogRecord)
{
return;
}
ulLength = sizeof(NAS_ERR_LOG_PROCESS_INFO_IND_EVENT_STRU);
/* 填充过程信息 */
PS_MEM_SET(&stProcInfoEvent, 0x00, ulLength);
NAS_COMM_BULID_ERRLOG_HEADER_INFO(&stProcInfoEvent.stHeader,
VOS_GetModemIDFromPid(WUEPS_PID_TAF),
NAS_ERR_LOG_ALM_PORCESS_INFO_IND,
usLevel,
VOS_GetSlice(),
(ulLength - sizeof(OM_ERR_LOG_HEADER_STRU)));
stProcInfoEvent.enInfoType = NAS_ERR_LOG_PROCESS_INFO_TYPE_CS_CALL_DISC;
stProcInfoEvent.stDiscInfo.ucCallId = ucCallId;
stProcInfoEvent.stDiscInfo.ulCause = enCause;
/*
将异常信息写入Buffer中
实际写入的字符数与需要写入的不等则打印异常
*/
ulResult = TAF_SDC_PutErrLogRingBuf((VOS_CHAR *)&stProcInfoEvent, ulLength);
if (ulResult != ulLength)
{
NAS_ERROR_LOG(WUEPS_PID_TAF, "MN_CALL_CsCallDiscInfoRecord(): Push buffer error.");
}
/* 可维可测勾包 */
NAS_COM_MntnPutRingbuf(NAS_ERR_LOG_ALM_PORCESS_INFO_IND,
WUEPS_PID_TAF,
(VOS_UINT8 *)&stProcInfoEvent,
sizeof(stProcInfoEvent));
return;
}
开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:55，代码来源:MnCall.c
示例15: NAS_RABM_RcvGmmReestablishCnf
VOS_VOID NAS_RABM_RcvGmmReestablishCnf(
GMMRABM_REESTABLISH_CNF_STRU *pstGmmReestablishCnf
)
{
NAS_RABM_PROC_FUNC_TBL_STRU *pstProcFuncTbl;
GMM_RABM_NET_RAT_ENUM_UINT32 enCurrentSysMode;
/* 判断当前的系统模式是否有效 */
enCurrentSysMode = NAS_RABM_GetCurrentSysMode();
if (NAS_MML_NET_RAT_TYPE_BUTT == enCurrentSysMode)
{
NAS_ERROR_LOG(WUEPS_PID_RABM,
"NAS_RABM_RcvGmmReestablishCnf: Invalid System Mode.");
return;
}
/* 根据当前系统模式获取对应的处理函数表的指针 */
pstProcFuncTbl = NAS_RABM_GetProFuncTblAddr(enCurrentSysMode);
/* 确认函数处理表已经注册 */
if (VOS_NULL_PTR != pstProcFuncTbl)
{
if (VOS_NULL_PTR != pstProcFuncTbl->pGmmReestablishCnfProcFunc)
{
/* 调用对应模式的处理函数 */
pstProcFuncTbl->pGmmReestablishCnfProcFunc(pstGmmReestablishCnf);
}
else
{
NAS_WARNING_LOG(WUEPS_PID_RABM,
"NAS_RABM_RcvGmmReestablishCnf: pGmmReestablishCnfProcFunc is not registered.");
}
}
else
{
NAS_ERROR_LOG(WUEPS_PID_RABM,
"NAS_RABM_RcvGmmReestablishCnf: Message is received in wrong system mode.");
}
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:39，代码来源:NasRabmMain.c
示例16: NAS_RABM_RcvDataResumeInd
VOS_VOID NAS_RABM_RcvDataResumeInd(
VOS_UINT8 ucRebuildRabFlag
)
{
NAS_RABM_PROC_FUNC_TBL_STRU *pstProcFuncTbl;
GMM_RABM_NET_RAT_ENUM_UINT32 enCurrentSysMode;
/* 判断当前的系统模式是否有效 */
enCurrentSysMode = NAS_RABM_GetCurrentSysMode();
if (NAS_MML_NET_RAT_TYPE_BUTT == enCurrentSysMode)
{
NAS_ERROR_LOG(WUEPS_PID_RABM,
"NAS_RABM_RcvDataResumeInd: Invalid System Mode.");
return;
}
/* 根据当前系统模式获取对应的处理函数表的指针 */
pstProcFuncTbl = NAS_RABM_GetProFuncTblAddr(enCurrentSysMode);
/* 确认函数处理表已经注册 */
if (VOS_NULL_PTR != pstProcFuncTbl)
{
if (VOS_NULL_PTR != pstProcFuncTbl->pDataResumeIndProcFunc)
{
/* 调用对应模式的处理函数 */
pstProcFuncTbl->pDataResumeIndProcFunc(ucRebuildRabFlag);
}
else
{
NAS_WARNING_LOG(WUEPS_PID_RABM,
"NAS_RABM_RcvDataResumeInd: pDataResumeIndProcFunc is not registered.");
}
}
else
{
NAS_ERROR_LOG(WUEPS_PID_RABM,
"NAS_RABM_RcvDataResumeInd: Message is received in wrong system mode.");
}
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:39，代码来源:NasRabmMain.c
示例17: NAS_RABM_RcvSmDeactivateInd
VOS_VOID NAS_RABM_RcvSmDeactivateInd(
RABMSM_DEACTIVATE_IND_STRU *pstSmDeactivateInd
)
{
NAS_RABM_PROC_FUNC_TBL_STRU *pstProcFuncTbl;
GMM_RABM_NET_RAT_ENUM_UINT32 enCurrentSysMode;
/* 判断当前的系统模式是否有效 */
enCurrentSysMode = NAS_RABM_GetCurrentSysMode();
if (NAS_MML_NET_RAT_TYPE_BUTT == enCurrentSysMode)
{
NAS_ERROR_LOG(WUEPS_PID_RABM,
"NAS_RABM_RcvSmDeactivateInd: Invalid System Mode.");
return;
}
/* 根据当前系统模式获取对应的处理函数表的指针 */
pstProcFuncTbl = NAS_RABM_GetProFuncTblAddr(enCurrentSysMode);
/* 确认函数处理表已经注册 */
if (VOS_NULL_PTR != pstProcFuncTbl)
{
if (VOS_NULL_PTR != pstProcFuncTbl->pSmDeactivateIndProcFunc)
{
/* 调用对应模式的处理函数 */
pstProcFuncTbl->pSmDeactivateIndProcFunc(pstSmDeactivateInd);
}
else
{
NAS_WARNING_LOG(WUEPS_PID_RABM,
"NAS_RABM_RcvSmDeactivateInd: pSmDeactivateIndProcFunc is not registered.");
}
}
else
{
NAS_ERROR_LOG(WUEPS_PID_RABM,
"NAS_RABM_RcvSmDeactivateInd: Msg is received in wrong system mode.");
}
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:39，代码来源:NasRabmMain.c
示例18: NAS_UTRANCTRL_RcvTiWaitTdSuspendCnfExpired_PlmnSelection_WaitTdSuspendCnf
VOS_UINT32 NAS_UTRANCTRL_RcvTiWaitTdSuspendCnfExpired_PlmnSelection_WaitTdSuspendCnf(
VOS_UINT32 ulEventType,
struct MsgCB *pstMsg
)
{
/* 异常打印 */
NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_RcvTiWaitTdSuspendCnfExpired_PlmnSelection_WaitTdSuspendCnf: ENTERED");
/* 复位 */
NAS_MML_SoftReBoot();
/* 消息处理完成不需继续处理 */
return VOS_TRUE;
}
开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:14，代码来源:NasUtranCtrlFsmPlmnSelection.c
示例19: NAS_RABM_RcvCommMsg
VOS_VOID NAS_RABM_RcvCommMsg(
struct MsgCB *pMsg
)
{
NAS_RABM_PROC_FUNC_TBL_STRU *pstProcFuncTbl;
GMM_RABM_NET_RAT_ENUM_UINT32 enCurrentSysMode;
/* 判断当前的系统模式是否有效 */
enCurrentSysMode = NAS_RABM_GetCurrentSysMode();
if (NAS_MML_NET_RAT_TYPE_BUTT == enCurrentSysMode)
{
NAS_ERROR_LOG(WUEPS_PID_RABM,
"NAS_RABM_ProcSysSrvChgInd: Invalid System Mode.");
return;
}
/* 根据当前系统模式获取对应的处理函数表的指针 */
pstProcFuncTbl = NAS_RABM_GetProFuncTblAddr(enCurrentSysMode);
if (VOS_NULL_PTR != pstProcFuncTbl)
{
if (VOS_NULL_PTR != pstProcFuncTbl->pTaskEntry)
{
/* 调用对应模式的处理函数 */
pstProcFuncTbl->pTaskEntry(pMsg);
}
else
{
NAS_WARNING_LOG(WUEPS_PID_RABM,
"NAS_RABM_ProcessCommMsg: TaskEntry is not registered.");
}
}
else
{
NAS_ERROR_LOG(WUEPS_PID_RABM,
"NAS_RABM_ProcessCommMsg: Msg is received in wrong system mode.");
}
}
开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:37，代码来源:NasRabmMain.c
示例20: NAS_SMS_SndOmInquireCnfMsg
VOS_VOID NAS_SMS_SndOmInquireCnfMsg(
ID_NAS_OM_INQUIRE_STRU *pstOmInquireMsg
)
{
VOS_UINT32 ulMsgLen;
NAS_OM_SMS_CONFIRM_STRU *pstNasOmSmsCnf;
VOS_UINT32 ulRet;
VOS_UINT32 ulSndOmRet;
/* 1. 向OM发送IND消息 */
ulSndOmRet = NAS_MMC_SndOmSmsIndMsg();
/* 2. 向工具侧回复CNF消息 */
/* 申请消息 */
ulMsgLen = sizeof(NAS_OM_SMS_CONFIRM_STRU) - VOS_MSG_HEAD_LENGTH;
pstNasOmSmsCnf = (NAS_OM_SMS_CONFIRM_STRU*)PS_ALLOC_MSG(WUEPS_PID_SMS, ulMsgLen);
if (VOS_NULL_PTR == pstNasOmSmsCnf)
{
NAS_ERROR_LOG(WUEPS_PID_SMS, "NAS_MMC_SndOmInquireCnfMsg:Memory Allocate fail!");
return;
}
/* 初始化 */
PS_MEM_SET((VOS_UINT8*)pstNasOmSmsCnf + VOS_MSG_HEAD_LENGTH, 0x00, ulMsgLen);
/* 填写消息内容 */
pstNasOmSmsCnf->ulReceiverPid = MSP_PID_DIAG_APP_AGENT;
pstNasOmSmsCnf->ulMsgId = ID_NAS_OM_SMS_CONFIRM;
pstNasOmSmsCnf->usOriginalId = pstOmInquireMsg->usOriginalId;
pstNasOmSmsCnf->usTerminalId = pstOmInquireMsg->usTerminalId;
pstNasOmSmsCnf->ulTimeStamp = pstOmInquireMsg->ulTimeStamp;
pstNasOmSmsCnf->ulSN = pstOmInquireMsg->ulSN;
pstNasOmSmsCnf->enResult = (NAS_OM_RESULT_ENUM_UINT32)ulSndOmRet;
/* 发送消息 */
ulRet = PS_SEND_MSG(WUEPS_PID_SMS, pstNasOmSmsCnf);
if (VOS_OK != ulRet)
{
MN_WARN_LOG("NAS_MMC_SndOmOtaCnf:WARNING: Send msg fail.");
}
return;
}
开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:48，代码来源:smsmain.c
注：本文中的NAS_ERROR_LOG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论