C++ NETCONNTYPE_GROUP函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中NETCONNTYPE_GROUP函数的典型用法代码示例。如果您正苦于以下问题：C++ NETCONNTYPE_GROUP函数的具体用法？C++ NETCONNTYPE_GROUP怎么用？C++ NETCONNTYPE_GROUP使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了NETCONNTYPE_GROUP函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: lwip_netconn_do_close

/**
 * Close a TCP pcb contained in a netconn
 * Called from netconn_close
 *
 * @param msg the api_msg_msg pointing to the connection
 */
void
lwip_netconn_do_close(struct api_msg_msg *msg)
{
#if LWIP_TCP
  /* @todo: abort running write/connect? */
  if ((msg->conn->state != NETCONN_NONE) && (msg->conn->state != NETCONN_LISTEN)) {
    /* this only happens for TCP netconns */
    LWIP_ASSERT("NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP",
                NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP);
    msg->err = ERR_INPROGRESS;
  } else if ((msg->conn->pcb.tcp != NULL) && (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP)) {
    if ((msg->msg.sd.shut != NETCONN_SHUT_RDWR) && (msg->conn->state == NETCONN_LISTEN)) {
      /* LISTEN doesn't support half shutdown */
      msg->err = ERR_CONN;
    } else {
      if (msg->msg.sd.shut & NETCONN_SHUT_RD) {
        /* Drain and delete mboxes */
        netconn_drain(msg->conn);
      }
      LWIP_ASSERT("already writing or closing", msg->conn->current_msg == NULL &&
        msg->conn->write_offset == 0);
      msg->conn->state = NETCONN_CLOSE;
      msg->conn->current_msg = msg;
      lwip_netconn_do_close_internal(msg->conn);
      /* for tcp netconns, lwip_netconn_do_close_internal ACKs the message */
      return;
    }
  } else
#endif /* LWIP_TCP */
  {
    msg->err = ERR_VAL;
  }
  sys_sem_signal(&msg->conn->op_completed);
}

开发者ID:mtharp，项目名称:lwip，代码行数:40，代码来源:api_msg.c

示例2: socket_bind

nsapi_error_t LWIP::socket_bind(nsapi_socket_t handle, const SocketAddress &address)
{
    struct mbed_lwip_socket *s = (struct mbed_lwip_socket *)handle;
    ip_addr_t ip_addr;

    if (
#if LWIP_TCP
        (NETCONNTYPE_GROUP(s->conn->type) == NETCONN_TCP && s->conn->pcb.tcp->local_port != 0) ||
#endif
        (NETCONNTYPE_GROUP(s->conn->type) == NETCONN_UDP && s->conn->pcb.udp->local_port != 0)) {
        return NSAPI_ERROR_PARAMETER;
    }

    nsapi_addr_t addr = address.get_addr();
    if (!convert_mbed_addr_to_lwip(&ip_addr, &addr)) {
        return NSAPI_ERROR_PARAMETER;
    }

    if (!ip_addr_isany_val(ip_addr) && !is_local_addr(&ip_addr)) {
        return NSAPI_ERROR_PARAMETER;
    }

    err_t err = netconn_bind(s->conn, &ip_addr, address.get_port());
    return err_remap(err);
}

开发者ID:donatieng，项目名称:mbed，代码行数:25，代码来源:LWIPStack.cpp

示例3: lwip_netconn_do_delconn

/**
 * Delete the pcb inside a netconn.
 * Called from netconn_delete.
 *
 * @param msg the api_msg_msg pointing to the connection
 */
void
lwip_netconn_do_delconn(struct api_msg_msg *msg)
{
  /* @todo TCP: abort running write/connect? */
 if ((msg->conn->state != NETCONN_NONE) &&
     (msg->conn->state != NETCONN_LISTEN) &&
     (msg->conn->state != NETCONN_CONNECT)) {
    /* this only happens for TCP netconns */
    LWIP_ASSERT("NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP",
                NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP);
    msg->err = ERR_INPROGRESS;
  } else {
    LWIP_ASSERT("blocking connect in progress",
      (msg->conn->state != NETCONN_CONNECT) || IN_NONBLOCKING_CONNECT(msg->conn));
    /* Drain and delete mboxes */
    netconn_drain(msg->conn);

    if (msg->conn->pcb.tcp != NULL) {

      switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
      case NETCONN_RAW:
        raw_remove(msg->conn->pcb.raw);
        break;
#endif /* LWIP_RAW */
#if LWIP_UDP
      case NETCONN_UDP:
        msg->conn->pcb.udp->recv_arg = NULL;
        udp_remove(msg->conn->pcb.udp);
        break;
#endif /* LWIP_UDP */
#if LWIP_TCP
      case NETCONN_TCP:
        LWIP_ASSERT("already writing or closing", msg->conn->current_msg == NULL &&
          msg->conn->write_offset == 0);
        msg->conn->state = NETCONN_CLOSE;
        msg->msg.sd.shut = NETCONN_SHUT_RDWR;
        msg->conn->current_msg = msg;
        lwip_netconn_do_close_internal(msg->conn);
        /* API_EVENT is called inside lwip_netconn_do_close_internal, before releasing
           the application thread, so we can return at this point! */
        return;
#endif /* LWIP_TCP */
      default:
        break;
      }
      msg->conn->pcb.tcp = NULL;
    }
    /* tcp netconns don't come here! */

    /* @todo: this lets select make the socket readable and writable,
       which is wrong! errfd instead? */
    API_EVENT(msg->conn, NETCONN_EVT_RCVPLUS, 0);
    API_EVENT(msg->conn, NETCONN_EVT_SENDPLUS, 0);
  }
  if (sys_sem_valid(&msg->conn->op_completed)) {
    sys_sem_signal(&msg->conn->op_completed);
  }
}

开发者ID:mtharp，项目名称:lwip，代码行数:65，代码来源:api_msg.c

示例4: lwip_netconn_do_connect

/**
 * Connect a pcb contained inside a netconn
 * Called from netconn_connect.
 *
 * @param msg the api_msg_msg pointing to the connection and containing
 *            the IP address and port to connect to
 */
void
lwip_netconn_do_connect(struct api_msg_msg *msg)
{
  if (msg->conn->pcb.tcp == NULL) {
    /* This may happen when calling netconn_connect() a second time */
    msg->err = ERR_CLSD;
    if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP) {
      /* For TCP, netconn_connect() calls tcpip_apimsg(), so signal op_completed here. */
      sys_sem_signal(&msg->conn->op_completed);
      return;
    }
  } else {
    switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
    case NETCONN_RAW:
      msg->err = raw_connect(msg->conn->pcb.raw, API_EXPR_REF(msg->msg.bc.ipaddr));
      break;
#endif /* LWIP_RAW */
#if LWIP_UDP
    case NETCONN_UDP:
      msg->err = udp_connect(msg->conn->pcb.udp, API_EXPR_REF(msg->msg.bc.ipaddr), msg->msg.bc.port);
      break;
#endif /* LWIP_UDP */
#if LWIP_TCP
    case NETCONN_TCP:
      /* Prevent connect while doing any other action. */
      if (msg->conn->state != NETCONN_NONE) {
        msg->err = ERR_ISCONN;
      } else {
        setup_tcp(msg->conn);
        msg->err = tcp_connect(msg->conn->pcb.tcp, API_EXPR_REF(msg->msg.bc.ipaddr),
          msg->msg.bc.port, lwip_netconn_do_connected);
        if (msg->err == ERR_OK) {
          u8_t non_blocking = netconn_is_nonblocking(msg->conn);
          msg->conn->state = NETCONN_CONNECT;
          SET_NONBLOCKING_CONNECT(msg->conn, non_blocking);
          if (non_blocking) {
            msg->err = ERR_INPROGRESS;
          } else {
            msg->conn->current_msg = msg;
            /* sys_sem_signal() is called from lwip_netconn_do_connected (or err_tcp()),
            * when the connection is established! */
            return;
          }
        }
      }
      /* For TCP, netconn_connect() calls tcpip_apimsg(), so signal op_completed here. */
      sys_sem_signal(&msg->conn->op_completed);
      return;
#endif /* LWIP_TCP */
    default:
      LWIP_ERROR("Invalid netconn type", 0, do{ msg->err = ERR_VAL; }while(0));
      break;
    }
  }
  /* For all other protocols, netconn_connect() calls TCPIP_APIMSG(),
     so use TCPIP_APIMSG_ACK() here. */
  TCPIP_APIMSG_ACK(msg);
}

开发者ID:mtharp，项目名称:lwip，代码行数:66，代码来源:api_msg.c

示例5: do_connect

/**
 * Connect a pcb contained inside a netconn
 * Called from netconn_connect.
 *
 * @param msg the api_msg_msg pointing to the connection and containing
 *            the IP address and port to connect to
 */
void
do_connect(struct api_msg_msg *msg)
{
  if (msg->conn->pcb.tcp == NULL) {
    sys_sem_signal(msg->conn->op_completed);
    return;
  }

  switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
  case NETCONN_RAW:
    msg->conn->err = raw_connect(msg->conn->pcb.raw, msg->msg.bc.ipaddr);
    sys_sem_signal(msg->conn->op_completed);
    break;
#endif /* LWIP_RAW */
#if LWIP_UDP
  case NETCONN_UDP:
    msg->conn->err = udp_connect(msg->conn->pcb.udp, msg->msg.bc.ipaddr, msg->msg.bc.port);
    sys_sem_signal(msg->conn->op_completed);
    break;
#endif /* LWIP_UDP */
#if LWIP_TCP
  case NETCONN_TCP:
    msg->conn->state = NETCONN_CONNECT;
    setup_tcp(msg->conn);
    msg->conn->err = tcp_connect(msg->conn->pcb.tcp, msg->msg.bc.ipaddr, msg->msg.bc.port,
                                 do_connected);
    /* sys_sem_signal() is called from do_connected (or err_tcp()),
     * when the connection is established! */
    break;
#endif /* LWIP_TCP */
  default:
    break;
  }
}

开发者ID:BlueSkyGjj，项目名称:nRF52，代码行数:42，代码来源:api_msg.c

示例6: lwip_netconn_do_listen

/**
 * Set a TCP pcb contained in a netconn into listen mode
 * Called from netconn_listen.
 *
 * @param msg the api_msg_msg pointing to the connection
 */
void
lwip_netconn_do_listen(struct api_msg_msg *msg)
{
  if (ERR_IS_FATAL(msg->conn->last_err)) {
    msg->err = msg->conn->last_err;
  } else {
    msg->err = ERR_CONN;
    if (msg->conn->pcb.tcp != NULL) {
      if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP) {
        if (msg->conn->state == NETCONN_NONE) {
          struct tcp_pcb* lpcb;
#if LWIP_IPV6
          if ((msg->conn->flags & NETCONN_FLAG_IPV6_V6ONLY) == 0) {
#if TCP_LISTEN_BACKLOG
            lpcb = tcp_listen_dual_with_backlog(msg->conn->pcb.tcp, msg->msg.lb.backlog);
#else  /* TCP_LISTEN_BACKLOG */
            lpcb = tcp_listen_dual(msg->conn->pcb.tcp);
#endif /* TCP_LISTEN_BACKLOG */
          } else
#endif /* LWIP_IPV6 */
          {
#if TCP_LISTEN_BACKLOG
            lpcb = tcp_listen_with_backlog(msg->conn->pcb.tcp, msg->msg.lb.backlog);
#else  /* TCP_LISTEN_BACKLOG */
            lpcb = tcp_listen(msg->conn->pcb.tcp);
#endif /* TCP_LISTEN_BACKLOG */
          }
          if (lpcb == NULL) {
            /* in this case, the old pcb is still allocated */
            msg->err = ERR_MEM;
          } else {
            /* delete the recvmbox and allocate the acceptmbox */
            if (sys_mbox_valid(&msg->conn->recvmbox)) {
              /** @todo: should we drain the recvmbox here? */
              sys_mbox_free(&msg->conn->recvmbox);
              sys_mbox_set_invalid(&msg->conn->recvmbox);
            }
            msg->err = ERR_OK;
            if (!sys_mbox_valid(&msg->conn->acceptmbox)) {
              msg->err = sys_mbox_new(&msg->conn->acceptmbox, DEFAULT_ACCEPTMBOX_SIZE);
            }
            if (msg->err == ERR_OK) {
              msg->conn->state = NETCONN_LISTEN;
              msg->conn->pcb.tcp = lpcb;
              tcp_arg(msg->conn->pcb.tcp, msg->conn);
              tcp_accept(msg->conn->pcb.tcp, accept_function);
            } else {
              /* since the old pcb is already deallocated, free lpcb now */
              tcp_close(lpcb);
              msg->conn->pcb.tcp = NULL;
            }
          }
        }
      } else {
        msg->err = ERR_ARG;
      }
    }
  }
  TCPIP_APIMSG_ACK(msg);
}

开发者ID:Akagi201，项目名称:lwip，代码行数:66，代码来源:api_msg.c

示例7: do_bind

/**
 * Bind a pcb contained in a netconn
 * Called from netconn_bind.
 *
 * @param msg the api_msg_msg pointing to the connection and containing
 *            the IP address and port to bind to
 */
void
do_bind(struct api_msg_msg *msg)
{
    if (ERR_IS_FATAL(msg->conn->last_err)) {
        msg->err = msg->conn->last_err;
    } else {
        msg->err = ERR_VAL;
        if (msg->conn->pcb.tcp != NULL) {
            switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
            case NETCONN_RAW:
                msg->err = raw_bind(msg->conn->pcb.raw, msg->msg.bc.ipaddr);
                break;
#endif /* LWIP_RAW */
#if LWIP_UDP
            case NETCONN_UDP:
                msg->err = udp_bind(msg->conn->pcb.udp, msg->msg.bc.ipaddr, msg->msg.bc.port);
                break;
#endif /* LWIP_UDP */
#if LWIP_TCP
            case NETCONN_TCP:
                msg->err = tcp_bind(msg->conn->pcb.tcp, msg->msg.bc.ipaddr, msg->msg.bc.port);
                break;
#endif /* LWIP_TCP */
            default:
                break;
            }
        }
    }
    TCPIP_APIMSG_ACK(msg);
}

开发者ID:comrid1987，项目名称:jb3500，代码行数:38，代码来源:api_msg.c

示例8: do_join_leave_group

/**
 * Join multicast groups for UDP netconns.
 * Called from netconn_join_leave_group
 *
 * @param msg the api_msg_msg pointing to the connection
 */
void
do_join_leave_group(struct api_msg_msg *msg)
{
    if (ERR_IS_FATAL(msg->conn->last_err)) {
        msg->err = msg->conn->last_err;
    } else {
        if (msg->conn->pcb.tcp != NULL) {
            if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_UDP) {
#if LWIP_UDP
                if (msg->msg.jl.join_or_leave == NETCONN_JOIN) {
                    msg->err = igmp_joingroup(msg->msg.jl.netif_addr, msg->msg.jl.multiaddr);
                } else {
                    msg->err = igmp_leavegroup(msg->msg.jl.netif_addr, msg->msg.jl.multiaddr);
                }
#endif /* LWIP_UDP */
#if (LWIP_TCP || LWIP_RAW)
            } else {
                msg->err = ERR_VAL;
#endif /* (LWIP_TCP || LWIP_RAW) */
            }
        } else {
            msg->err = ERR_CONN;
        }
    }
    TCPIP_APIMSG_ACK(msg);
}

开发者ID:comrid1987，项目名称:jb3500，代码行数:32，代码来源:api_msg.c

示例9: lwip_netconn_do_getaddr

/**
 * Return a connection's local or remote address
 * Called from netconn_getaddr
 *
 * @param msg the api_msg_msg pointing to the connection
 */
void
lwip_netconn_do_getaddr(struct api_msg_msg *msg)
{
  if (msg->conn->pcb.ip != NULL) {
    if (msg->msg.ad.local) {
      ipX_addr_copy(PCB_ISIPV6(msg->conn->pcb.ip), API_EXPR_DEREF(msg->msg.ad.ipaddr),
        msg->conn->pcb.ip->local_ip);
    } else {
      ipX_addr_copy(PCB_ISIPV6(msg->conn->pcb.ip), API_EXPR_DEREF(msg->msg.ad.ipaddr),
        msg->conn->pcb.ip->remote_ip);
    }
    msg->err = ERR_OK;
    switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
    case NETCONN_RAW:
      if (msg->msg.ad.local) {
        API_EXPR_DEREF(msg->msg.ad.port) = msg->conn->pcb.raw->protocol;
      } else {
        /* return an error as connecting is only a helper for upper layers */
        msg->err = ERR_CONN;
      }
      break;
#endif /* LWIP_RAW */
#if LWIP_UDP
    case NETCONN_UDP:
      if (msg->msg.ad.local) {
        API_EXPR_DEREF(msg->msg.ad.port) = msg->conn->pcb.udp->local_port;
      } else {
        if ((msg->conn->pcb.udp->flags & UDP_FLAGS_CONNECTED) == 0) {
          msg->err = ERR_CONN;
        } else {
          API_EXPR_DEREF(msg->msg.ad.port) = msg->conn->pcb.udp->remote_port;
        }
      }
      break;
#endif /* LWIP_UDP */
#if LWIP_TCP
    case NETCONN_TCP:
      if ((msg->msg.ad.local == 0) &&
          ((msg->conn->pcb.tcp->state == CLOSED) || (msg->conn->pcb.tcp->state == LISTEN))) {
        /* pcb is not connected and remote name is requested */
        msg->err = ERR_CONN;
      } else {
        API_EXPR_DEREF(msg->msg.ad.port) = (msg->msg.ad.local ? msg->conn->pcb.tcp->local_port : msg->conn->pcb.tcp->remote_port);
      }
      break;
#endif /* LWIP_TCP */
    default:
      LWIP_ASSERT("invalid netconn_type", 0);
      break;
    }
  } else {
    msg->err = ERR_CONN;
  }
  TCPIP_APIMSG_ACK(msg);
}

开发者ID:mtharp，项目名称:lwip，代码行数:62，代码来源:api_msg.c

示例10: netconn_drain

/**
 * Delete rcvmbox and acceptmbox of a netconn and free the left-over data in
 * these mboxes
 *
 * @param conn the netconn to free
 * @bytes_drained bytes drained from recvmbox
 * @accepts_drained pending connections drained from acceptmbox
 */
static void
netconn_drain(struct netconn *conn)
{
  void *mem;
#if LWIP_TCP
  struct pbuf *p;
#endif /* LWIP_TCP */

  /* This runs in tcpip_thread, so we don't need to lock against rx packets */

  /* Delete and drain the recvmbox. */
  if (sys_mbox_valid(&conn->recvmbox)) {
    while (sys_mbox_tryfetch(&conn->recvmbox, &mem) != SYS_MBOX_EMPTY) {
#if LWIP_TCP
      if (NETCONNTYPE_GROUP(conn->type) == NETCONN_TCP) {
        if(mem != NULL) {
          p = (struct pbuf*)mem;
          /* pcb might be set to NULL already by err_tcp() */
          if (conn->pcb.tcp != NULL) {
            tcp_recved(conn->pcb.tcp, p->tot_len);
          }
          pbuf_free(p);
        }
      } else
#endif /* LWIP_TCP */
      {
        netbuf_delete((struct netbuf *)mem);
      }
    }
    sys_mbox_free(&conn->recvmbox);
    sys_mbox_set_invalid(&conn->recvmbox);
  }

  /* Delete and drain the acceptmbox. */
#if LWIP_TCP
  if (sys_mbox_valid(&conn->acceptmbox)) {
    while (sys_mbox_tryfetch(&conn->acceptmbox, &mem) != SYS_MBOX_EMPTY) {
      struct netconn *newconn = (struct netconn *)mem;
      /* Only tcp pcbs have an acceptmbox, so no need to check conn->type */
      /* pcb might be set to NULL already by err_tcp() */
      if (conn->pcb.tcp != NULL) {
        tcp_accepted(conn->pcb.tcp);
      }
      /* drain recvmbox */
      netconn_drain(newconn);
      if (newconn->pcb.tcp != NULL) {
        tcp_abort(newconn->pcb.tcp);
        newconn->pcb.tcp = NULL;
      }
      netconn_free(newconn);
    }
    sys_mbox_free(&conn->acceptmbox);
    sys_mbox_set_invalid(&conn->acceptmbox);
  }
#endif /* LWIP_TCP */
}

开发者ID:mtharp，项目名称:lwip，代码行数:64，代码来源:api_msg.c

示例11: do_connect

/**
 * Connect a pcb contained inside a netconn
 * Called from netconn_connect.
 *
 * @param msg the api_msg_msg pointing to the connection and containing
 *            the IP address and port to connect to
 */
void
do_connect(struct api_msg_msg *msg)
{
  if (msg->conn->pcb.tcp == NULL) {
    /* This may happen when calling netconn_connect() a second time */
    msg->err = ERR_CLSD;
  } else {
    switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
  case NETCONN_RAW:
    msg->err = raw_connect(msg->conn->pcb.raw, msg->msg.bc.ipaddr);
    break;
#endif /* LWIP_RAW */
#if LWIP_UDP
  case NETCONN_UDP:
    msg->err = udp_connect(msg->conn->pcb.udp, msg->msg.bc.ipaddr, msg->msg.bc.port);
    break;
#endif /* LWIP_UDP */
#if LWIP_TCP
  case NETCONN_TCP:
    /* Prevent connect while doing any other action. */
    if (msg->conn->state != NETCONN_NONE) {
      msg->err = ERR_ISCONN;
    } else {
      setup_tcp(msg->conn);
      msg->err = tcp_connect(msg->conn->pcb.tcp, msg->msg.bc.ipaddr,
        msg->msg.bc.port, do_connected);
      if (msg->err == ERR_OK) {
        u8_t non_blocking = netconn_is_nonblocking(msg->conn);
        msg->conn->state = NETCONN_CONNECT;
        SET_NONBLOCKING_CONNECT(msg->conn, non_blocking);
        if (non_blocking) {
          msg->err = ERR_WOULDBLOCK/*ERR_INPROGRESS*/;
        } else {
          msg->conn->current_msg = msg;
          /* sys_sem_signal() is called from do_connected (or err_tcp()),
          * when the connection is established! */
          return;
        }
      }
    }
    break;
#endif /* LWIP_TCP */
  default:
    LWIP_ERROR("Invalid netconn type", 0, do{ msg->err = ERR_VAL; }while(0));
    break;
    }
  }
  sys_sem_signal(&msg->conn->op_completed);
}

开发者ID:0x00dec0de，项目名称:Rovnix，代码行数:57，代码来源:api_msg.c

示例12: do_disconnect

/**
 * Connect a pcb contained inside a netconn
 * Only used for UDP netconns.
 * Called from netconn_disconnect.
 *
 * @param msg the api_msg_msg pointing to the connection to disconnect
 */
void
do_disconnect(struct api_msg_msg *msg)
{
#if LWIP_UDP
    if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_UDP) {
        udp_disconnect(msg->conn->pcb.udp);
        msg->err = ERR_OK;
    } else
#endif /* LWIP_UDP */
    {
        msg->err = ERR_VAL;
    }
    TCPIP_APIMSG_ACK(msg);
}

开发者ID:comrid1987，项目名称:jb3500，代码行数:21，代码来源:api_msg.c

示例13: lwip_netconn_do_write

/**
 * Send some data on a TCP pcb contained in a netconn
 * Called from netconn_write
 *
 * @param msg the api_msg_msg pointing to the connection
 */
void
lwip_netconn_do_write(struct api_msg_msg *msg)
{
  if (ERR_IS_FATAL(msg->conn->last_err)) {
    msg->err = msg->conn->last_err;
  } else {
    if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP) {
#if LWIP_TCP
      if (msg->conn->state != NETCONN_NONE) {
        /* netconn is connecting, closing or in blocking write */
        msg->err = ERR_INPROGRESS;
      } else if (msg->conn->pcb.tcp != NULL) {
        msg->conn->state = NETCONN_WRITE;
        /* set all the variables used by lwip_netconn_do_writemore */
        LWIP_ASSERT("already writing or closing", msg->conn->current_msg == NULL &&
          msg->conn->write_offset == 0);
        LWIP_ASSERT("msg->msg.w.len != 0", msg->msg.w.len != 0);
        msg->conn->current_msg = msg;
        msg->conn->write_offset = 0;
#if LWIP_TCPIP_CORE_LOCKING
        msg->conn->flags &= ~NETCONN_FLAG_WRITE_DELAYED;
        if (lwip_netconn_do_writemore(msg->conn) != ERR_OK) {
          LWIP_ASSERT("state!", msg->conn->state == NETCONN_WRITE);
          UNLOCK_TCPIP_CORE();
          sys_arch_sem_wait(&msg->conn->op_completed, 0);
          LOCK_TCPIP_CORE();
          LWIP_ASSERT("state!", msg->conn->state == NETCONN_NONE);
        }
#else /* LWIP_TCPIP_CORE_LOCKING */
        lwip_netconn_do_writemore(msg->conn);
#endif /* LWIP_TCPIP_CORE_LOCKING */
        /* for both cases: if lwip_netconn_do_writemore was called, don't ACK the APIMSG
           since lwip_netconn_do_writemore ACKs it! */
        return;
      } else {
        msg->err = ERR_CONN;
      }
#else /* LWIP_TCP */
      msg->err = ERR_VAL;
#endif /* LWIP_TCP */
#if (LWIP_UDP || LWIP_RAW)
    } else {
      msg->err = ERR_VAL;
#endif /* (LWIP_UDP || LWIP_RAW) */
    }
  }
  TCPIP_APIMSG_ACK(msg);
}

开发者ID:mtharp，项目名称:lwip，代码行数:54，代码来源:api_msg.c

示例14: do_getaddr

/**
 * Return a connection's local or remote address
 * Called from netconn_getaddr
 *
 * @param msg the api_msg_msg pointing to the connection
 */
void
do_getaddr(struct api_msg_msg *msg)
{
    if (msg->conn->pcb.ip != NULL) {
        *(msg->msg.ad.ipaddr) = (msg->msg.ad.local ? msg->conn->pcb.ip->local_ip :
                                 msg->conn->pcb.ip->remote_ip);

        msg->err = ERR_OK;
        switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
        case NETCONN_RAW:
            if (msg->msg.ad.local) {
                *(msg->msg.ad.port) = msg->conn->pcb.raw->protocol;
            } else {
                /* return an error as connecting is only a helper for upper layers */
                msg->err = ERR_CONN;
            }
            break;
#endif /* LWIP_RAW */
#if LWIP_UDP
        case NETCONN_UDP:
            if (msg->msg.ad.local) {
                *(msg->msg.ad.port) = msg->conn->pcb.udp->local_port;
            } else {
                if ((msg->conn->pcb.udp->flags & UDP_FLAGS_CONNECTED) == 0) {
                    msg->err = ERR_CONN;
                } else {
                    *(msg->msg.ad.port) = msg->conn->pcb.udp->remote_port;
                }
            }
            break;
#endif /* LWIP_UDP */
#if LWIP_TCP
        case NETCONN_TCP:
            *(msg->msg.ad.port) = (msg->msg.ad.local?msg->conn->pcb.tcp->local_port:msg->conn->pcb.tcp->remote_port);
            break;
#endif /* LWIP_TCP */
        default:
            LWIP_ASSERT("invalid netconn_type", 0);
            break;
        }
    } else {
        msg->err = ERR_CONN;
    }
    TCPIP_APIMSG_ACK(msg);
}

开发者ID:comrid1987，项目名称:jb3500，代码行数:52，代码来源:api_msg.c

示例15: do_send

/**
 * Send some data on a RAW or UDP pcb contained in a netconn
 * Called from netconn_send
 *
 * @param msg the api_msg_msg pointing to the connection
 */
void
do_send(struct api_msg_msg *msg)
{
    if (ERR_IS_FATAL(msg->conn->last_err)) {
        msg->err = msg->conn->last_err;
    } else {
        msg->err = ERR_CONN;
        if (msg->conn->pcb.tcp != NULL) {
            switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
            case NETCONN_RAW:
                if (ip_addr_isany(&msg->msg.b->addr)) {
                    msg->err = raw_send(msg->conn->pcb.raw, msg->msg.b->p);
                } else {
                    msg->err = raw_sendto(msg->conn->pcb.raw, msg->msg.b->p, &msg->msg.b->addr);
                }
                break;
#endif
#if LWIP_UDP
            case NETCONN_UDP:
#if LWIP_CHECKSUM_ON_COPY
                if (ip_addr_isany(&msg->msg.b->addr)) {
                    msg->err = udp_send_chksum(msg->conn->pcb.udp, msg->msg.b->p,
                                               msg->msg.b->flags & NETBUF_FLAG_CHKSUM, msg->msg.b->toport_chksum);
                } else {
                    msg->err = udp_sendto_chksum(msg->conn->pcb.udp, msg->msg.b->p,
                                                 &msg->msg.b->addr, msg->msg.b->port,
                                                 msg->msg.b->flags & NETBUF_FLAG_CHKSUM, msg->msg.b->toport_chksum);
                }
#else /* LWIP_CHECKSUM_ON_COPY */
                if (ip_addr_isany(&msg->msg.b->addr)) {
                    msg->err = udp_send(msg->conn->pcb.udp, msg->msg.b->p);
                } else {
                    msg->err = udp_sendto(msg->conn->pcb.udp, msg->msg.b->p, &msg->msg.b->addr, msg->msg.b->port);
                }
#endif /* LWIP_CHECKSUM_ON_COPY */
                break;
#endif /* LWIP_UDP */
            default:
                break;
            }
        }
    }
    TCPIP_APIMSG_ACK(msg);
}

开发者ID:comrid1987，项目名称:jb3500，代码行数:51，代码来源:api_msg.c

示例16: lwip_netconn_do_join_leave_group

/**
 * Join multicast groups for UDP netconns.
 * Called from netconn_join_leave_group
 *
 * @param msg the api_msg_msg pointing to the connection
 */
void
lwip_netconn_do_join_leave_group(struct api_msg_msg *msg)
{ 
  if (ERR_IS_FATAL(msg->conn->last_err)) {
    msg->err = msg->conn->last_err;
  } else {
    if (msg->conn->pcb.tcp != NULL) {
      if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_UDP) {
#if LWIP_UDP
#if LWIP_IPV6 && LWIP_IPV6_MLD
        if (PCB_ISIPV6(msg->conn->pcb.udp)) {
          if (msg->msg.jl.join_or_leave == NETCONN_JOIN) {
            msg->err = mld6_joingroup(ipX_2_ip6(API_EXPR_REF(msg->msg.jl.netif_addr)),
              ipX_2_ip6(API_EXPR_REF(msg->msg.jl.multiaddr)));
          } else {
            msg->err = mld6_leavegroup(ipX_2_ip6(API_EXPR_REF(msg->msg.jl.netif_addr)),
              ipX_2_ip6(API_EXPR_REF(msg->msg.jl.multiaddr)));
          }
        }
        else
#endif /* LWIP_IPV6 && LWIP_IPV6_MLD */
        {
#if LWIP_IGMP
          if (msg->msg.jl.join_or_leave == NETCONN_JOIN) {
            msg->err = igmp_joingroup(ipX_2_ip(API_EXPR_REF(msg->msg.jl.netif_addr)),
              ipX_2_ip(API_EXPR_REF(msg->msg.jl.multiaddr)));
          } else {
            msg->err = igmp_leavegroup(ipX_2_ip(API_EXPR_REF(msg->msg.jl.netif_addr)),
              ipX_2_ip(API_EXPR_REF(msg->msg.jl.multiaddr)));
          }
#endif /* LWIP_IGMP */
        }
#endif /* LWIP_UDP */
#if (LWIP_TCP || LWIP_RAW)
      } else {
        msg->err = ERR_VAL;
#endif /* (LWIP_TCP || LWIP_RAW) */
      }
    } else {
      msg->err = ERR_CONN;
    }
  }
  TCPIP_APIMSG_ACK(msg);
}

开发者ID:mtharp，项目名称:lwip，代码行数:50，代码来源:api_msg.c

示例17: lwip_netconn_do_connected

/**
 * TCP callback function if a connection (opened by tcp_connect/lwip_netconn_do_connect) has
 * been established (or reset by the remote host).
 *
 * @see tcp.h (struct tcp_pcb.connected) for parameters and return values
 */
static err_t
lwip_netconn_do_connected(void *arg, struct tcp_pcb *pcb, err_t err)
{
  struct netconn *conn;
  int was_blocking;
  sys_sem_t* op_completed_sem = NULL;

  LWIP_UNUSED_ARG(pcb);

  conn = (struct netconn *)arg;

  if (conn == NULL) {
    return ERR_VAL;
  }

  LWIP_ASSERT("conn->state == NETCONN_CONNECT", conn->state == NETCONN_CONNECT);
  LWIP_ASSERT("(conn->current_msg != NULL) || conn->in_non_blocking_connect",
    (conn->current_msg != NULL) || IN_NONBLOCKING_CONNECT(conn));

  if (conn->current_msg != NULL) {
    conn->current_msg->err = err;
    op_completed_sem = LWIP_API_MSG_SEM(conn->current_msg);
  }
  if ((NETCONNTYPE_GROUP(conn->type) == NETCONN_TCP) && (err == ERR_OK)) {
    setup_tcp(conn);
  }
  was_blocking = !IN_NONBLOCKING_CONNECT(conn);
  SET_NONBLOCKING_CONNECT(conn, 0);
  LWIP_ASSERT("blocking connect state error",
    (was_blocking && op_completed_sem != NULL) ||
    (!was_blocking && op_completed_sem == NULL));
  conn->current_msg = NULL;
  conn->state = NETCONN_NONE;
  if (!was_blocking) {
    NETCONN_SET_SAFE_ERR(conn, ERR_OK);
  }
  API_EVENT(conn, NETCONN_EVT_SENDPLUS, 0);

  if (was_blocking) {
    sys_sem_signal(op_completed_sem);
  }
  return ERR_OK;
}

开发者ID:cya410，项目名称:libraries，代码行数:49，代码来源:api_msg.c

示例18: lwip_netconn_do_recv

/**
 * Indicate data has been received from a TCP pcb contained in a netconn
 * Called from netconn_recv
 *
 * @param msg the api_msg_msg pointing to the connection
 */
void
lwip_netconn_do_recv(struct api_msg_msg *msg)
{
  msg->err = ERR_OK;
  if (msg->conn->pcb.tcp != NULL) {
    if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP) {
#if TCP_LISTEN_BACKLOG
      if (msg->conn->pcb.tcp->state == LISTEN) {
        tcp_accepted(msg->conn->pcb.tcp);
      } else
#endif /* TCP_LISTEN_BACKLOG */
      {
        u32_t remaining = msg->msg.r.len;
        do {
          u16_t recved = (remaining > 0xffff) ? 0xffff : (u16_t)remaining;
          tcp_recved(msg->conn->pcb.tcp, recved);
          remaining -= recved;
        }while(remaining != 0);
      }
    }
  }
  TCPIP_APIMSG_ACK(msg);
}

开发者ID:mtharp，项目名称:lwip，代码行数:29，代码来源:api_msg.c

示例19: netconn_alloc

/**
 * Create a new netconn (of a specific type) that has a callback function.
 * The corresponding pcb is NOT created!
 *
 * @param t the type of 'connection' to create (@see enum netconn_type)
 * @param proto the IP protocol for RAW IP pcbs
 * @param callback a function to call on status changes (RX available, TX'ed)
 * @return a newly allocated struct netconn or
 *         NULL on memory error
 */
struct netconn*
netconn_alloc(enum netconn_type t, netconn_callback callback)
{
    struct netconn *conn;
    int size;

    conn = (struct netconn *)memp_malloc(MEMP_NETCONN);
    if (conn == NULL) {
        return NULL;
    }

    conn->last_err = ERR_OK;
    conn->type = t;
    conn->pcb.tcp = NULL;

#if (DEFAULT_RAW_RECVMBOX_SIZE == DEFAULT_UDP_RECVMBOX_SIZE) && \
    (DEFAULT_RAW_RECVMBOX_SIZE == DEFAULT_TCP_RECVMBOX_SIZE)
    size = DEFAULT_RAW_RECVMBOX_SIZE;
#else
    switch(NETCONNTYPE_GROUP(t)) {
#if LWIP_RAW
    case NETCONN_RAW:
        size = DEFAULT_RAW_RECVMBOX_SIZE;
        break;
#endif /* LWIP_RAW */
#if LWIP_UDP
    case NETCONN_UDP:
        size = DEFAULT_UDP_RECVMBOX_SIZE;
        break;
#endif /* LWIP_UDP */
#if LWIP_TCP
    case NETCONN_TCP:
        size = DEFAULT_TCP_RECVMBOX_SIZE;
        break;
#endif /* LWIP_TCP */
    default:
        LWIP_ASSERT("netconn_alloc: undefined netconn_type", 0);
        goto free_and_return;
    }
#endif

    if (sys_sem_new(&conn->op_completed, 0) != ERR_OK) {
        goto free_and_return;
    }
    if (sys_mbox_new(&conn->recvmbox, size) != ERR_OK) {
        sys_sem_free(&conn->op_completed);
        goto free_and_return;
    }

#if LWIP_TCP
    sys_mbox_set_invalid(&conn->acceptmbox);
#endif
    conn->state        = NETCONN_NONE;
#if LWIP_SOCKET
    /* initialize socket to -1 since 0 is a valid socket */
    conn->socket       = -1;
#endif /* LWIP_SOCKET */
    conn->callback     = callback;
#if LWIP_TCP
    conn->current_msg  = NULL;
    conn->write_offset = 0;
#endif /* LWIP_TCP */
#if LWIP_SO_SNDTIMEO
    conn->send_timeout = 0;
#endif /* LWIP_SO_SNDTIMEO */
#if LWIP_SO_RCVTIMEO
    conn->recv_timeout = 0;
#endif /* LWIP_SO_RCVTIMEO */
#if LWIP_SO_RCVBUF
    conn->recv_bufsize = RECV_BUFSIZE_DEFAULT;
    conn->recv_avail   = 0;
#endif /* LWIP_SO_RCVBUF */
    conn->flags = 0;
    return conn;
free_and_return:
    memp_free(MEMP_NETCONN, conn);
    return NULL;
}

开发者ID:comrid1987，项目名称:jb3500，代码行数:88，代码来源:api_msg.c

示例20: recv_udp


//.........这里部分代码省略.........
        LWIP_DEBUGF(API_MSG_DEBUG, ("accept_function: acceptmbox already deleted\n"));
        return ERR_VAL;
    }

    /* We have to set the callback here even though
     * the new socket is unknown. conn->socket is marked as -1. */
    newconn = netconn_alloc(conn->type, conn->callback);
    if (newconn == NULL) {
        return ERR_MEM;
    }
    newconn->pcb.tcp = newpcb;
    setup_tcp(newconn);
    /* no protection: when creating the pcb, the netconn is not yet known
       to the application thread */
    newconn->last_err = err;

    if (sys_mbox_trypost(&conn->acceptmbox, newconn) != ERR_OK) {
        /* When returning != ERR_OK, the pcb is aborted in tcp_process(),
           so do nothing here! */
        /* remove all references to this netconn from the pcb */
        struct tcp_pcb* pcb = newconn->pcb.tcp;
        tcp_arg(pcb, NULL);
        tcp_recv(pcb, NULL);
        tcp_sent(pcb, NULL);
        tcp_poll(pcb, NULL, 4);
        tcp_err(pcb, NULL);
        /* remove reference from to the pcb from this netconn */
        newconn->pcb.tcp = NULL;
        /* no need to drain since we know the recvmbox is empty. */
        sys_mbox_free(&newconn->recvmbox);
        sys_mbox_set_invalid(&newconn->recvmbox);
        netconn_free(newconn);
        return ERR_MEM;
    } else {
        /* Register event with callback */
        API_EVENT(conn, NETCONN_EVT_RCVPLUS, 0);
    }

    return ERR_OK;
}
#endif /* LWIP_TCP */

/**
 * Create a new pcb of a specific type.
 * Called from do_newconn().
 *
 * @param msg the api_msg_msg describing the connection type
 * @return msg->conn->err, but the return value is currently ignored
 */
static void
pcb_new(struct api_msg_msg *msg)
{
    LWIP_ASSERT("pcb_new: pcb already allocated", msg->conn->pcb.tcp == NULL);

    /* Allocate a PCB for this connection */
    switch(NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
    case NETCONN_RAW:
        msg->conn->pcb.raw = raw_new(msg->msg.n.proto);
        if(msg->conn->pcb.raw == NULL) {
            msg->err = ERR_MEM;
            break;
        }
        raw_recv(msg->conn->pcb.raw, recv_raw, msg->conn);
        break;
#endif /* LWIP_RAW */
#if LWIP_UDP
    case NETCONN_UDP:
        msg->conn->pcb.udp = udp_new();
        if(msg->conn->pcb.udp == NULL) {
            msg->err = ERR_MEM;
            break;
        }
#if LWIP_UDPLITE
        if (msg->conn->type==NETCONN_UDPLITE) {
            udp_setflags(msg->conn->pcb.udp, UDP_FLAGS_UDPLITE);
        }
#endif /* LWIP_UDPLITE */
        if (msg->conn->type==NETCONN_UDPNOCHKSUM) {
            udp_setflags(msg->conn->pcb.udp, UDP_FLAGS_NOCHKSUM);
        }
        udp_recv(msg->conn->pcb.udp, recv_udp, msg->conn);
        break;
#endif /* LWIP_UDP */
#if LWIP_TCP
    case NETCONN_TCP:
        msg->conn->pcb.tcp = tcp_new();
        if(msg->conn->pcb.tcp == NULL) {
            msg->err = ERR_MEM;
            break;
        }
        setup_tcp(msg->conn);
        break;
#endif /* LWIP_TCP */
    default:
        /* Unsupported netconn type, e.g. protocol disabled */
        msg->err = ERR_VAL;
        break;
    }
}

开发者ID:comrid1987，项目名称:jb3500，代码行数:101，代码来源:api_msg.c

注：本文中的NETCONNTYPE_GROUP函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ NETDEBUG函数代码示例发布时间：2022-05-30

C++ NELEMS函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18210|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9656|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8168|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9375|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8418|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8403|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ NETCONNTYPE_GROUP函数代码示例

示例1: lwip_netconn_do_close

示例2: socket_bind

示例3: lwip_netconn_do_delconn

示例4: lwip_netconn_do_connect

示例5: do_connect

示例6: lwip_netconn_do_listen

示例7: do_bind

示例8: do_join_leave_group

示例9: lwip_netconn_do_getaddr

示例10: netconn_drain

示例11: do_connect

示例12: do_disconnect

示例13: lwip_netconn_do_write

示例14: do_getaddr

示例15: do_send

示例16: lwip_netconn_do_join_leave_group

示例17: lwip_netconn_do_connected

示例18: lwip_netconn_do_recv

示例19: netconn_alloc

示例20: recv_udp

请发表评论

全部评论

上一篇：

下一篇：

OsbertWang/install-latex-guide-zh-cn: 一

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053