本文整理汇总了C++中NETIF_LINK_CALLBACK函数的典型用法代码示例。如果您正苦于以下问题：C++ NETIF_LINK_CALLBACK函数的具体用法？C++ NETIF_LINK_CALLBACK怎么用？C++ NETIF_LINK_CALLBACK使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了NETIF_LINK_CALLBACK函数的8个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: netif_set_link_down
/**
* Called by a driver when its link goes down
*/
void netif_set_link_down(struct netif *netif )
{
if (netif->flags & NETIF_FLAG_LINK_UP) {
netif->flags &= ~NETIF_FLAG_LINK_UP;
NETIF_LINK_CALLBACK(netif);
}
}
开发者ID:projectarkc，项目名称:psiphon，代码行数:10，代码来源:netif.c
示例2: netif_set_up
/**
* Bring an interface up, available for processing
* traffic.
*
* @note: Enabling DHCP on a down interface will make it come
* up once configured.
*
* @see dhcp_start()
*/
void netif_set_up(struct netif *netif)
{
if ( !(netif->flags & NETIF_FLAG_UP )) {
netif->flags |= NETIF_FLAG_UP;
#if LWIP_SNMP
snmp_get_sysuptime(&netif->ts);
#endif /* LWIP_SNMP */
NETIF_LINK_CALLBACK(netif);
NETIF_STATUS_CALLBACK(netif);
#if LWIP_ARP_GRATUITOUS
/** For Ethernet network interfaces, we would like to send a
* "gratuitous ARP"; this is an ARP packet sent by a node in order
* to spontaneously cause other nodes to update an entry in their
* ARP cache. From RFC 3220 "IP Mobility Support for IPv4" section 4.6.
*/
if (netif->flags & NETIF_FLAG_ETHARP) {
etharp_query(netif, &(netif->ip_addr), NULL);
}
#endif /* LWIP_ARP */
}
}
开发者ID:laurarg94，项目名称:fpga-magic-1，代码行数:34，代码来源:netif.c
示例3: netif_set_link_up
/**
* Called by a driver when its link goes up
*/
void netif_set_link_up(struct netif *netif )
{
netif->flags |= NETIF_FLAG_LINK_UP;
#if LWIP_DHCP
if (netif->dhcp) {
dhcp_network_changed(netif);
}
#endif /* LWIP_DHCP */
#if LWIP_AUTOIP
if (netif->autoip) {
autoip_network_changed(netif);
}
#endif /* LWIP_AUTOIP */
if (netif->flags & NETIF_FLAG_UP) {
#if LWIP_ARP
/* For Ethernet network interfaces, we would like to send a "gratuitous ARP" */
if (netif->flags & NETIF_FLAG_ETHARP) {
etharp_gratuitous(netif);
}
#endif /* LWIP_ARP */
#if LWIP_IGMP
/* resend IGMP memberships */
if (netif->flags & NETIF_FLAG_IGMP) {
igmp_report_groups( netif);
}
#endif /* LWIP_IGMP */
}
NETIF_LINK_CALLBACK(netif);
}
开发者ID:AustinWise，项目名称:Netduino-Micro-Framework，代码行数:36，代码来源:netif.c
示例4: netif_set_up
/**
* Bring an interface up, available for processing
* traffic.
*
* @note: Enabling DHCP on a down interface will make it come
* up once configured.
*
* @see dhcp_start()
*/
void netif_set_up(struct netif *netif)
{
if ( !(netif->flags & NETIF_FLAG_UP )) {
netif->flags |= NETIF_FLAG_UP;
#if LWIP_SNMP
snmp_get_sysuptime(&netif->ts);
#endif /* LWIP_SNMP */
#if LWIP_ARP
/* For Ethernet network interfaces, we would like to send a "gratuitous ARP" */
if (netif->flags & NETIF_FLAG_ETHARP) {
etharp_gratuitous(netif);
}
#endif /* LWIP_ARP */
#if LWIP_IGMP
/* resend IGMP memberships */
if (netif->flags & NETIF_FLAG_IGMP) {
igmp_report_groups( netif);
}
#endif /* LWIP_IGMP */
}
//[MS_CHANGE - move this outside the if statement so we can be notified when DHCP gets an address]
NETIF_LINK_CALLBACK(netif);
NETIF_STATUS_CALLBACK(netif);
}
开发者ID:AustinWise，项目名称:Netduino-Micro-Framework，代码行数:37，代码来源:netif.c
示例5: netif_set_up
/**
* Bring an interface up, available for processing
* traffic.
*
* @note: Enabling DHCP on a down interface will make it come
* up once configured.
*
* @see dhcp_start()
*/
void netif_set_up(struct netif *netif)
{
if ( !(netif->flags & NETIF_FLAG_UP )) {
netif->flags |= NETIF_FLAG_UP;
#if LWIP_SNMP
snmp_get_sysuptime(&netif->ts);
#endif /* LWIP_SNMP */
NETIF_LINK_CALLBACK(netif);
NETIF_STATUS_CALLBACK(netif);
#if LWIP_ARP
/* For Ethernet network interfaces, we would like to send a "gratuitous ARP" */
if (netif->flags & NETIF_FLAG_ETHARP) {
etharp_gratuitous(netif);
}
#endif /* LWIP_ARP */
#if LWIP_IGMP
/* resend IGMP memberships */
if (netif->flags & NETIF_FLAG_IGMP) {
igmp_report_groups( netif);
}
#endif /* LWIP_IGMP */
}
}
开发者ID:DanMills，项目名称:j4cDAC，代码行数:36，代码来源:netif.c
示例6: netif_set_down
/**
* Bring an interface down, disabling any traffic processing.
*
* @note: Enabling DHCP on a down interface will make it come
* up once configured.
*
* @see dhcp_start()
*/
void netif_set_down(struct netif *netif)
{
if ( netif->flags & NETIF_FLAG_UP )
{
netif->flags &= ~NETIF_FLAG_UP;
#if LWIP_SNMP
snmp_get_sysuptime(&netif->ts);
#endif
NETIF_LINK_CALLBACK(netif);
NETIF_STATUS_CALLBACK(netif);
}
}
开发者ID:laurarg94，项目名称:fpga-magic-1，代码行数:21，代码来源:netif.c
示例7: netif_set_link_up
/**
* Called by a driver when its link goes up
*/
void
netif_set_link_up(struct netif *netif)
{
if (!(netif->flags & NETIF_FLAG_LINK_UP)) {
netif->flags |= NETIF_FLAG_LINK_UP;
#if LWIP_DHCP
if (netif->dhcp) {
dhcp_network_changed(netif);
}
#endif /* LWIP_DHCP */
if (netif->flags & NETIF_FLAG_UP) {
netif_issue_reports(netif, NETIF_REPORT_TYPE_IPV4|NETIF_REPORT_TYPE_IPV6);
}
NETIF_LINK_CALLBACK(netif);
}
}
开发者ID:juantresde，项目名称:aprinter，代码行数:21，代码来源:netif.c
示例8: netif_set_link_up
/**
* Called by a driver when its link goes up
*/
void netif_set_link_up(struct netif *netif )
{
netif->flags |= NETIF_FLAG_LINK_UP;
#if LWIP_ARP
/** For Ethernet network interfaces, we would like to send a
* "gratuitous ARP"; this is an ARP packet sent by a node in order
* to spontaneously cause other nodes to update an entry in their
* ARP cache. From RFC 3220 "IP Mobility Support for IPv4" section 4.6.
*/
if (netif->flags & NETIF_FLAG_ETHARP) {
etharp_query(netif, &(netif->ip_addr), NULL);
}
#endif /* LWIP_ARP */
#if LWIP_IGMP
/* resend IGMP memberships */
if (netif->flags & NETIF_FLAG_IGMP) {
igmp_report_groups( netif);
}
#endif /* LWIP_IGMP */
NETIF_LINK_CALLBACK(netif);
}
开发者ID:laurarg94，项目名称:fpga-magic-1，代码行数:27，代码来源:netif.c
注：本文中的NETIF_LINK_CALLBACK函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论