• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ NET_SendPacket函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中NET_SendPacket函数的典型用法代码示例。如果您正苦于以下问题:C++ NET_SendPacket函数的具体用法?C++ NET_SendPacket怎么用?C++ NET_SendPacket使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了NET_SendPacket函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: CL_Rcon_f

/*
=====================
CL_Rcon_f

  Send the rest of the command line over as
  an unconnected command.
=====================
*/
void CL_Rcon_f (void)
{
    char	message[1024];
    int		i;
    netadr_t	to;

    if (!rcon_client_password->string)
    {
        Com_Printf ("You must set 'rcon_password' before\n"
                    "issuing an rcon command.\n");
        return;
    }

    message[0] = (char)255;
    message[1] = (char)255;
    message[2] = (char)255;
    message[3] = (char)255;
    message[4] = 0;

    NET_Config (true);		// allow remote

    strcat (message, "rcon ");

    strcat (message, rcon_client_password->string);
    strcat (message, " ");

    for (i=1 ; i<Cmd_Argc() ; i++)
    {
        strcat (message, Cmd_Argv(i));
        strcat (message, " ");
    }

    if (cls.state >= ca_connected)
        to = cls.netchan.remote_address;
    else
    {
        if (!strlen(rcon_address->string))
        {
            Com_Printf ("You must either be connected,\n"
                        "or set the 'rcon_address' cvar\n"
                        "to issue rcon commands\n");

            return;
        }
        NET_StringToAdr (rcon_address->string, &to);
        if (to.port == 0)
            to.port = BigShort (PORT_SERVER);
    }

    NET_SendPacket (NS_CLIENT, strlen(message)+1, message, to);
}
开发者ID:AimHere,项目名称:thirty-flights-of-linux,代码行数:59,代码来源:cl_main.c


示例2: CL_Connect_f

/*
================
CL_Connect_f

MAUTH version -- kick off an authentication sequence as first part of
connection routine.
================
*/
void CL_Connect_f (void)
{
	char	*server;
	char	*masterserver;
    char    data[2048];

	if (Cmd_Argc() != 3)
	{
		Com_Printf ("usage: connect <master> <server>\n");
		return;
	}
	
	Host_EndGame ();
	
    server = Cmd_Argv (1);
	strlcpy (cls.servername, server, sizeof(cls.servername));

    // Have to check for valid server address here as we must send to master...
	if (!NET_StringToAdr (cls.servername, &cls.server_adr))
	{
		Com_Printf ("Bad server address\n");
		return;
	}
	if (cls.server_adr.port == 0)
		cls.server_adr.port = BigShort (PORT_SERVER);

	masterserver = Cmd_Argv (2);
	strlcpy (cls.masterservername, masterserver, sizeof(cls.masterservername));

    // Start off auth sequence before trying to connect...
	if (!NET_StringToAdr (cls.masterservername, &cls.masterserver_adr))
	{
		Com_Printf ("Bad master server address\n");
		return;
	}
	if (cls.masterserver_adr.port == 0)
		cls.masterserver_adr.port = BigShort (27000);  // master port

	Com_Printf ("Attempting to auth with %s...\n", cls.masterservername);
	sprintf (data, "%c\n%s\n%s:%d\n",
            C2M_AUTH_INIT,
            Cvar_String("name"),
            cls.servername,
            cls.server_adr.port);
	NET_SendPacket (NS_CLIENT, strlen(data), data, cls.masterserver_adr);

    // Normal connection procedure...
    // FIXME wait?
    // FIXME use some qbools to work out if we get a NACK to stop trying to connect -- ie preserve state
	CL_BeginServerConnect();
}
开发者ID:luaman,项目名称:zq,代码行数:59,代码来源:cl_main.c


示例3: Netchan_Transmit

/*
===============
Netchan_Transmit

Sends a message to a connection, fragmenting if necessary
A 0 length will still generate a packet.
================
*/
void Netchan_Transmit( netchan_t *chan, int length, const byte *data )
{
	msg_t send;
	byte  send_buf[ MAX_PACKETLEN ];

	if ( length > MAX_MSGLEN )
	{
		Com_Error( ERR_DROP, "Netchan_Transmit: length = %i", length );
	}

	chan->unsentFragmentStart = 0;

	// fragment large reliable messages
	if ( length >= FRAGMENT_SIZE )
	{
		chan->unsentFragments = qtrue;
		chan->unsentLength = length;
		Com_Memcpy( chan->unsentBuffer, data, length );

		// only send the first fragment now
		Netchan_TransmitNextFragment( chan );

		return;
	}

	// write the packet header
	MSG_InitOOB( &send, send_buf, sizeof( send_buf ) );

	MSG_WriteLong( &send, chan->outgoingSequence );
	chan->outgoingSequence++;

	// send the qport if we are a client
	if ( chan->sock == NS_CLIENT )
	{
		MSG_WriteShort( &send, qport->integer );
	}

	MSG_WriteData( &send, data, length );

	// send the datagram
	NET_SendPacket( chan->sock, send.cursize, send.data, chan->remoteAddress );

	if ( showpackets->integer )
	{
		Com_Printf( "%s send %4i : s=%i ack=%i\n"
		            , netsrcString[ chan->sock ]
		            , send.cursize
		            , chan->outgoingSequence - 1
		            , chan->incomingSequence );
	}
}
开发者ID:SHOVELL,项目名称:Unvanquished,代码行数:59,代码来源:net_chan.c


示例4: CL_SendConnectPacket_QW

static void CL_SendConnectPacket_QW(peer_t *p) 
{
	char data[2048];
	char biguserinfo[MAX_INFO_STRING + 32];

	if (p->ps != ps_challenge)
		return;

	// Let the server know what extensions we support.
	strlcpy (biguserinfo, p->userinfo, sizeof (biguserinfo));
	snprintf(data, sizeof(data), "\xff\xff\xff\xff" "connect %i %i %i \"%s\"\n", QW_PROTOCOL_VERSION, p->qport, p->challenge, biguserinfo);

	NET_SendPacket(net_from_socket, strlen(data), data, &net_from);
}
开发者ID:deurk,项目名称:qwfwd,代码行数:14,代码来源:clc.c


示例5: PRINTF_LIKE

/*
===============
NET_OutOfBandPrint

Sends a text message in an out-of-band datagram
================
*/
void QDECL PRINTF_LIKE(3) NET_OutOfBandPrint( netsrc_t sock, netadr_t adr, const char *format, ... )
{
	va_list argptr;
	char    string[ MAX_MSGLEN ];

	NET_SetOOBHeader( string );

	va_start( argptr, format );
	Q_vsnprintf( string + 4, sizeof( string ) - 4, format, argptr );
	va_end( argptr );

	// send the datagram
	NET_SendPacket( sock, strlen( string ), string, adr );
}
开发者ID:BlueMustache,项目名称:Unvanquished,代码行数:21,代码来源:net_chan.cpp


示例6: NET_SV_SendQueryResponse

void NET_SV_SendQueryResponse(net_addr_t *addr)
{
    net_packet_t *reply;
    net_querydata_t querydata;
    int p;

    // Version

    querydata.version = PACKAGE_STRING;

    // Server state

    querydata.server_state = server_state;

    // Number of players/maximum players

    querydata.num_players = NET_SV_NumPlayers();
    querydata.max_players = NET_SV_MaxPlayers();

    // Game mode/mission

    querydata.gamemode = sv_gamemode;
    querydata.gamemission = sv_gamemission;

    //!
    // @category net
    // @arg <name>
    //
    // When starting a network server, specify a name for the server.
    //

    p = M_CheckParmWithArgs("-servername", 1);

    if (p > 0)
    {
        querydata.description = myargv[p + 1];
    }
    else
    {
        querydata.description = "Unnamed server";
    }

    // Send it and we're done.
    NET_Log("server: sending query response to %s", NET_AddrToString(addr));
    reply = NET_NewPacket(64);
    NET_WriteInt16(reply, NET_PACKET_TYPE_QUERY_RESPONSE);
    NET_WriteQueryData(reply, &querydata);
    NET_SendPacket(addr, reply);
    NET_FreePacket(reply);
}
开发者ID:chocolate-doom,项目名称:chocolate-doom,代码行数:50,代码来源:net_server.c


示例7: Netchan_OutOfBand

/*
===============
Netchan_OutOfBand

Sends an out-of-band datagram
================
*/
void Netchan_OutOfBand (int net_socket, netadr_t adr, int length, byte *data)
{
	sizebuf_t	send;
	byte		send_buf[MAX_MSGLEN];

// write the packet header
	SZ_Init (&send, send_buf, sizeof(send_buf));
	
	MSG_WriteLong (&send, -1);	// -1 sequence means out of band
	SZ_Write (&send, data, length);

// send the datagram
	NET_SendPacket (net_socket, send.cursize, send.data, adr);
}
开发者ID:AJenbo,项目名称:Quake-2,代码行数:21,代码来源:net_chan.c


示例8: Host_GetBatchModList_f

void Host_GetBatchModList_f() { //Odd...

   master_server_t * ptr;


   NET_Config(1);
   if(gfNoMasterServer != 0 || masterlist == NULL) { return; }

   for(ptr = masterlist; ptr != NULL; ptr = ptr->next) {

      Con_Printf("Requesting batch mod status from %s", NET_AdrToString(ptr->address));
      NET_SendPacket(NS_CLIENT, sizeof("x\r\nstart-of-list\r\n"), "x\r\nstart-of-list\r\n", ptr->address);
   }
}
开发者ID:SOLARIC,项目名称:world-opponent-network,代码行数:14,代码来源:master.c


示例9: CL_SendConnectPacket

/*
	CL_SendConnectPacket

	called by CL_Connect_f and CL_CheckResend
*/
void
CL_SendConnectPacket (void)
{
	netadr_t    adr;
	char        data[2048];
	double      t1, t2;

// JACK: Fixed bug where DNS lookups would cause two connects real fast
//       Now, adds lookup time to the connect time.
//       Should I add it to realtime instead?!?!

	if (cls.state != ca_disconnected)
		return;

	t1 = Sys_DoubleTime ();

	if (!NET_StringToAdr (cls.servername, &adr)) {
		Con_Printf ("Bad server address\n");
		connect_time = -1;
		return;
	}

	if (!NET_IsClientLegal (&adr)) {
		Con_Printf ("Illegal server address\n");
		connect_time = -1;
		return;
	}

	if (adr.port == 0)
		adr.port = BigShort (27500);
	t2 = Sys_DoubleTime ();

	connect_time = realtime + t2 - t1;	// for retransmit requests

	cls.qport = Cvar_VariableValue ("qport");

	// Arrgh, this was not in the old binary only release, and eats up
	// far too much of the 196 chars in the userinfo space, leaving nothing
	// for player use, thus, its commented out for the moment..
	// 
	// Info_SetValueForStarKey (cls.userinfo, "*ip", NET_AdrToString(adr),
	// MAX_INFO_STRING);

//  Con_Printf ("Connecting to %s...\n", cls.servername);
	snprintf (data, sizeof (data), "%c%c%c%cconnect %i %i %i \"%s\"\n",
			  255, 255, 255, 255, PROTOCOL_VERSION, cls.qport, cls.challenge,
			  cls.userinfo);
	NET_SendPacket (strlen (data), data, adr);
}
开发者ID:luaman,项目名称:qforge-newtree,代码行数:54,代码来源:cl_main.c


示例10: Netchan_TransmitNextFragment

/*
=================
Netchan_TransmitNextFragment

Send one fragment of the current message
=================
*/
qboolean Netchan_TransmitNextFragment( netchan_t *chan ) {
	msg_t send;
	qboolean sendsucc;
	byte send_buf[MAX_PACKETLEN];
	int fragmentLength;
	qboolean var_01 = qfalse;
	// write the packet header
	MSG_Init( &send, send_buf, sizeof( send_buf ) );                // <-- only do the oob here

	MSG_WriteLong( &send, chan->outgoingSequence | FRAGMENT_BIT );

	// send the qport if we are a client
	if ( chan->sock == NS_CLIENT ) {
		MSG_WriteShort( &send, qport->integer );
	}

	// copy the reliable message to the packet first
	fragmentLength = FRAGMENT_SIZE;
	if ( chan->unsentFragmentStart  + fragmentLength > chan->unsentLength ) {
		fragmentLength = chan->unsentLength - chan->unsentFragmentStart;
		var_01 = qtrue;
	}

	MSG_WriteLong(&send, chan->unsentFragmentStart);
	MSG_WriteShort( &send, fragmentLength );
	MSG_WriteData( &send, chan->unsentBuffer + chan->unsentFragmentStart, fragmentLength );

	// send the datagram
	sendsucc = NET_SendPacket( chan->sock, send.cursize, send.data, &chan->remoteAddress );
	if ( showpackets->boolean ) {
		Com_Printf( "%s send %4i : s=%i fragment=%i,%i\n"
					, netsrcString[ chan->sock ]
					, send.cursize
					, chan->outgoingSequence
					, chan->unsentFragmentStart, fragmentLength );
	}

	chan->unsentFragmentStart += fragmentLength;

	// this exit condition is a little tricky, because a packet
	// that is exactly the fragment length still needs to send
	// a second packet of zero length so that the other side
	// can tell there aren't more to follow
	if ( chan->unsentFragmentStart == chan->unsentLength && var_01 ) {
		chan->outgoingSequence++;
		chan->unsentFragments = qfalse;
	}
	return sendsucc;
}
开发者ID:BraXi,项目名称:CoD4X18-Server,代码行数:56,代码来源:netchan.c


示例11: SV_ConnectionlessPacket

/*
=================
SV_ConnectionlessPacket

A connectionless packet has four leading 0xff
characters to distinguish it from a game channel.
Clients that are in the game can still send
connectionless packets.
=================
*/
static void SV_ConnectionlessPacket (void)
{
	const char	*s;
	const char	*c;

	MSG_BeginReading ();
	MSG_ReadLong ();	// skip the -1 marker

	s = MSG_ReadStringLine ();

	Cmd_TokenizeString (s);

	c = Cmd_Argv(0);

	if (!strcmp(c, "ping") || ( c[0] == A2A_PING && (c[1] == 0 || c[1] == '\n')) )
	{
		SVC_Ping ();
		return;
	}
	if (c[0] == A2A_ACK && (c[1] == 0 || c[1] == '\n') )
	{
		Con_Printf ("A2A_ACK from %s\n", NET_AdrToString (net_from));
		return;
	}
	else if (c[0] == A2S_ECHO)
	{
		NET_SendPacket (net_message.cursize, net_message.data, net_from);
		return;
	}
	else if (!strcmp(c,"status"))
	{
		SVC_Status ();
		return;
	}
	else if (!strcmp(c,"log"))
	{
		SVC_Log ();
		return;
	}
	else if (!strcmp(c,"connect"))
	{
		SVC_DirectConnect ();
		return;
	}
	else if (!strcmp(c, "rcon"))
		SVC_RemoteCommand ();
	else
		Con_Printf ("bad connectionless packet from %s:\n%s\n", NET_AdrToString (net_from), s);
}
开发者ID:crutchwalkfactory,项目名称:motocakerteam,代码行数:59,代码来源:sv_main.c


示例12: CL_InternetServers_f

/*
=================
CL_InternetServers_f
=================
*/
void CL_InternetServers_f( void )
{
	netadr_t	adr;
	char	fullquery[512] = "\x31\xFF" "0.0.0.0:0\0" "\\gamedir\\";

	MsgDev( D_INFO, "Scanning for servers on the internet area...\n" );
	NET_Config( true ); // allow remote

	if( !NET_StringToAdr( MASTERSERVER_ADR, &adr ) )
		MsgDev( D_INFO, "Can't resolve adr: %s\n", MASTERSERVER_ADR );

	Q_strcpy( &fullquery[21], GI->gamedir );

	NET_SendPacket( NS_CLIENT, Q_strlen( GI->gamedir ) + 22, fullquery, adr );
}
开发者ID:ShaunNoWay,项目名称:xash3d,代码行数:20,代码来源:cl_main.c


示例13: SVC_Log

/*
================
SVC_Log

Responds with all the logged frags for ranking programs.
If a sequence number is passed as a parameter and it is
the same as the current sequence, an A2A_NACK will be returned
instead of the data.
================
*/
void SVC_Log (void)
{
	int		seq;
	char	data[MAX_DATAGRAM+64];

	if (Cmd_Argc() == 2)
		seq = atoi(Cmd_Argv(1));
	else
		seq = -1;

	if (seq == svs.logsequence-1 || !sv_fraglogfile)
	{	// they already have this data, or we aren't logging frags
		data[0] = A2A_NACK;
		NET_SendPacket (NS_SERVER, 1, data, net_from);
		return;
	}

	Com_DPrintf ("sending log %i to %s\n", svs.logsequence-1, NET_AdrToString(net_from));

	sprintf (data, "stdlog %i\n", svs.logsequence-1);
	strcat (data, (char *)svs.log_buf[((svs.logsequence-1)&1)]);

	NET_SendPacket (NS_SERVER, strlen(data)+1, data, net_from);
}
开发者ID:matatk,项目名称:agrip,代码行数:34,代码来源:sv_main.c


示例14: Netchan_OutOfBand

/*
* Netchan_OutOfBand
* 
* Sends an out-of-band datagram
*/
void Netchan_OutOfBand( const socket_t *socket, const netadr_t *address, size_t length, const uint8_t *data )
{
	msg_t send;
	uint8_t send_buf[MAX_PACKETLEN];

	// write the packet header
	MSG_Init( &send, send_buf, sizeof( send_buf ) );

	MSG_WriteLong( &send, -1 ); // -1 sequence means out of band
	MSG_WriteData( &send, data, length );

	// send the datagram
	if( !NET_SendPacket( socket, send.data, send.cursize, address ) )
		Com_Printf( "NET_SendPacket: Error: %s\n", NET_ErrorString() );
}
开发者ID:tenght,项目名称:qfusion,代码行数:20,代码来源:net_chan.c


示例15: CL_Rcon_f

/*
=====================
CL_Rcon_f

  Send the rest of the command line over as
  an unconnected command.
=====================
*/
void CL_Rcon_f (void)
{
	char	message[1024];
	int		i;
	netadr_t	to;

	if (!rcon_password.string)
	{
		Con_Printf ("You must set 'rcon_password' before\n"
					"issuing an rcon command.\n");
		return;
	}

	message[0] = 255;
	message[1] = 255;
	message[2] = 255;
	message[3] = 255;
	message[4] = 0;

	strcat (message, "rcon ");

	strcat (message, rcon_password.string);
	strcat (message, " ");

	for (i=1 ; i<Cmd_Argc() ; i++)
	{
		strcat (message, Cmd_Argv(i));
		strcat (message, " ");
	}

	if (cls.state >= ca_connected)
		to = cls.netchan.remote_address;
	else
	{
		if (!strlen(rcon_address.string))
		{
			Con_Printf ("You must either be connected,\n"
						"or set the 'rcon_address' cvar\n"
						"to issue rcon commands\n");

			return;
		}
		NET_StringToAdr (rcon_address.string, &to);
	}
	
	NET_SendPacket (strlen(message)+1, message
		, to);
}
开发者ID:ACIIL,项目名称:Quake,代码行数:56,代码来源:cl_main.c


示例16: OutofBandPrintf

void OutofBandPrintf(netadr_t where, char *fmt, ...)
{
	va_list		argptr;
	char	send[1024];
	
	send[0] = 0xff;
	send[1] = 0xff;
	send[2] = 0xff;
	send[3] = 0xff;
	send[4] = A2C_PRINT;
	va_start (argptr, fmt);
	vsprintf (send+5, fmt, argptr);
	va_end (argptr);

	NET_SendPacket (strlen(send)+1, send, where);
}
开发者ID:flwh,项目名称:Alcatel_OT_985_kernel,代码行数:16,代码来源:sv_user.c


示例17: CL_InternetServers_f

/*
=================
CL_InternetServers_f
=================
*/
void CL_InternetServers_f( void )
{
	netadr_t	adr;
	char	fullquery[512] = MS_SCAN_REQUEST;

	MsgDev( D_INFO, "Scanning for servers on the internet area...\n" );
	NET_Config( true ); // allow remote

	if( !NET_StringToAdr( sv_master->string, &adr ) )
	{
		MsgDev( D_INFO, "Can't resolve adr: %s\n", sv_master->string );
		return;
	}

	NET_SendPacket( NS_CLIENT, sizeof( MS_SCAN_REQUEST ) + Q_strcpy( fullquery + sizeof( MS_SCAN_REQUEST ) - 1, GI->gamedir ), fullquery, adr );
}
开发者ID:Reedych,项目名称:xash3d,代码行数:21,代码来源:cl_main.c


示例18: QRY_SV_PingServers

static void QRY_SV_PingServers(void)
{
	static int		idx;
	static double	last;

	double			current = Sys_DoubleTime(); // we need double time for ping measurement
	server_t		*sv;

	// do not ping servers since we do not query masters
	if (!masters_query->integer)
		return;

	if (!servers)
		return; // nothing to do

	if (current - last < QW_SERVER_RATE)
		return; // do not ping servers too fast

	last = current;

	idx = (int)max(0, idx);
	sv = QRY_SV_ByIndex(idx++);
	if (!sv)
		sv = QRY_SV_ByIndex(idx = 0); // can't find server by index, try with index 0

	if (!sv)
		return; // hm, should not be the case...

	// check for dead server
	if (!sv->reply && sv->ping_sent_at - sv->ping_reply_at > QW_SERVER_DEAD_TIME)
	{
		Sys_DPrintf("dead -> %s:%d\n", inet_ntoa(sv->addr.sin_addr), (int)ntohs(sv->addr.sin_port));

		QRY_SV_free(sv, true); // remove damn server, however master server may add it back...
		idx--; // step back index
		return;
	}

	if (sv->ping_sent_at && current - sv->ping_sent_at < QW_SERVER_MIN_PING_REQUEST_TIME)
		return; // do not spam server

	sv->ping_sent_at = current; // remember when we sent ping
	sv->reply = false; // reset reply flag

	NET_SendPacket(net_socket, sizeof(QW_SERVER_PING_QUERY)-1, QW_SERVER_PING_QUERY, &sv->addr);
//	Sys_Printf("ping(%3d) -> %s:%d\n", idx, inet_ntoa(sv->addr.sin_addr), (int)ntohs(sv->addr.sin_port));
}
开发者ID:deurk,项目名称:qwfwd,代码行数:47,代码来源:query.c


示例19: Netchan_OutOfBand

/*
===============
Netchan_OutOfBand

Sends an out-of-band datagram
================
*/
void Netchan_OutOfBand( int net_socket, netadr_t adr, int length, byte *data )
{
	sizebuf_t	send;
	byte	send_buf[NET_MAX_PAYLOAD];

	// write the packet header
	BF_Init( &send, "SequencePacket", send_buf, sizeof( send_buf ));
	
	BF_WriteLong( &send, -1 );	// -1 sequence means out of band
	BF_WriteBytes( &send, data, length );

	if( !CL_IsPlaybackDemo( ))
	{
		// send the datagram
		NET_SendPacket( net_socket, BF_GetNumBytesWritten( &send ), BF_GetData( &send ), adr );
	}
}
开发者ID:ShaunNoWay,项目名称:xash3d,代码行数:24,代码来源:net_chan.c


示例20: NET_OutOfBandPrint

__cdecl void QDECL NET_OutOfBandPrint( netsrc_t sock, netadr_t *adr, const char *format, ... ) {
	va_list		argptr;
	char		string[MAX_MSGLEN];

	// set the header
	string[0] = -1;
	string[1] = -1;
	string[2] = -1;
	string[3] = -1;

	va_start( argptr, format );
	Q_vsnprintf( string+4, sizeof(string)-4, format, argptr );
	va_end( argptr );

	// send the datagram
	NET_SendPacket( sock, strlen( string ), string, adr );
}
开发者ID:BraXi,项目名称:CoD4X18-Server,代码行数:17,代码来源:netchan.c



注:本文中的NET_SendPacket函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ NETbeginDecode函数代码示例发布时间:2022-05-30
下一篇:
C++ NET_SendMessage函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap