• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ NF_HOOK_THRESH函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中NF_HOOK_THRESH函数的典型用法代码示例。如果您正苦于以下问题:C++ NF_HOOK_THRESH函数的具体用法?C++ NF_HOOK_THRESH怎么用?C++ NF_HOOK_THRESH使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了NF_HOOK_THRESH函数的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: br_nf_pre_routing_finish_ipv6

/* PF_BRIDGE/PRE_ROUTING: Undo the changes made for ip6tables
 * PREROUTING and continue the bridge PRE_ROUTING hook. See comment
 * for br_nf_pre_routing_finish(), same logic is used here but
 * equivalent IPv6 function ip6_route_input() called indirectly.
 */
static int br_nf_pre_routing_finish_ipv6(struct net *net, struct sock *sk, struct sk_buff *skb)
{
	struct nf_bridge_info *nf_bridge = nf_bridge_info_get(skb);
	struct rtable *rt;
	struct net_device *dev = skb->dev;
	const struct nf_ipv6_ops *v6ops = nf_get_ipv6_ops();

	nf_bridge->frag_max_size = IP6CB(skb)->frag_max_size;

	if (nf_bridge->pkt_otherhost) {
		skb->pkt_type = PACKET_OTHERHOST;
		nf_bridge->pkt_otherhost = false;
	}
	nf_bridge->in_prerouting = 0;
	if (br_nf_ipv6_daddr_was_changed(skb, nf_bridge)) {
		skb_dst_drop(skb);
		v6ops->route_input(skb);

		if (skb_dst(skb)->error) {
			kfree_skb(skb);
			return 0;
		}

		if (skb_dst(skb)->dev == dev) {
			skb->dev = nf_bridge->physindev;
			nf_bridge_update_protocol(skb);
			nf_bridge_push_encap_header(skb);
			NF_HOOK_THRESH(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
				       net, sk, skb, skb->dev, NULL,
				       br_nf_pre_routing_finish_bridge,
				       1);
			return 0;
		}
		ether_addr_copy(eth_hdr(skb)->h_dest, dev->dev_addr);
		skb->pkt_type = PACKET_HOST;
	} else {
		rt = bridge_parent_rtable(nf_bridge->physindev);
		if (!rt) {
			kfree_skb(skb);
			return 0;
		}
		skb_dst_set_noref(skb, &rt->dst);
	}

	skb->dev = nf_bridge->physindev;
	nf_bridge_update_protocol(skb);
	nf_bridge_push_encap_header(skb);
	NF_HOOK_THRESH(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, net, sk, skb,
		       skb->dev, NULL,
		       br_handle_frame_finish, 1);

	return 0;
}
开发者ID:513855417,项目名称:linux,代码行数:58,代码来源:br_netfilter_ipv6.c


示例2: br_nf_pre_routing_finish_ipv6

/* Undo the changes made for ip6tables PREROUTING and continue the
 * bridge PRE_ROUTING hook. */
static int br_nf_pre_routing_finish_ipv6(struct sk_buff *skb)
{
	struct nf_bridge_info *nf_bridge = skb->nf_bridge;

#ifdef CONFIG_NETFILTER_DEBUG
	skb->nf_debug ^= (1 << NF_BR_PRE_ROUTING);
#endif

	if (nf_bridge->mask & BRNF_PKT_TYPE) {
		skb->pkt_type = PACKET_OTHERHOST;
		nf_bridge->mask ^= BRNF_PKT_TYPE;
	}
	nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;

	skb->dst = (struct dst_entry *)&__fake_rtable;
	dst_hold(skb->dst);

	skb->dev = nf_bridge->physindev;
	if (skb->protocol == __constant_htons(ETH_P_8021Q)) {
		skb_push(skb, VLAN_HLEN);
		skb->nh.raw -= VLAN_HLEN;
	}
	NF_HOOK_THRESH(PF_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL,
		       br_handle_frame_finish, 1);

	return 0;
}
开发者ID:GodFox,项目名称:magx_kernel_xpixl,代码行数:29,代码来源:br_netfilter.c


示例3: br_nf_pre_routing_finish_ipv6

/* Undo the changes made for ip6tables PREROUTING and continue the
 * bridge PRE_ROUTING hook. */
static int br_nf_pre_routing_finish_ipv6(struct sk_buff *skb)
{
	struct nf_bridge_info *nf_bridge = skb->nf_bridge;
	struct rtable *rt;

	if (nf_bridge->mask & BRNF_PKT_TYPE) {
		skb->pkt_type = PACKET_OTHERHOST;
		nf_bridge->mask ^= BRNF_PKT_TYPE;
	}
	nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;

	rt = bridge_parent_rtable(nf_bridge->physindev);
	if (!rt) {
		kfree_skb(skb);
		return 0;
	}
	skb_dst_set_noref(skb, &rt->dst);

	skb->dev = nf_bridge->physindev;
	nf_bridge_update_protocol(skb);
	nf_bridge_push_encap_header(skb);
	NF_HOOK_THRESH(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL,
		       br_handle_frame_finish, 1);

	return 0;
}
开发者ID:mesosexy,项目名称:linux-2.6,代码行数:28,代码来源:br_netfilter.c


示例4: br_nf_forward_finish

/* PF_BRIDGE/FORWARD *************************************************/
static int br_nf_forward_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
{
	struct nf_bridge_info *nf_bridge = nf_bridge_info_get(skb);
	struct net_device *in;

	if (!IS_ARP(skb) && !IS_VLAN_ARP(skb)) {

		if (skb->protocol == htons(ETH_P_IP))
			nf_bridge->frag_max_size = IPCB(skb)->frag_max_size;

		if (skb->protocol == htons(ETH_P_IPV6))
			nf_bridge->frag_max_size = IP6CB(skb)->frag_max_size;

		in = nf_bridge->physindev;
		if (nf_bridge->pkt_otherhost) {
			skb->pkt_type = PACKET_OTHERHOST;
			nf_bridge->pkt_otherhost = false;
		}
		nf_bridge_update_protocol(skb);
	} else {
		in = *((struct net_device **)(skb->cb));
	}
	nf_bridge_push_encap_header(skb);

	NF_HOOK_THRESH(NFPROTO_BRIDGE, NF_BR_FORWARD, net, sk, skb,
		       in, skb->dev, br_forward_finish, 1);
	return 0;
}
开发者ID:545191228,项目名称:linux,代码行数:29,代码来源:br_netfilter_hooks.c


示例5: br_nf_pre_routing_finish

/* This requires some explaining. If DNAT has taken place,
 * we will need to fix up the destination Ethernet address.
 *
 * There are two cases to consider:
 * 1. The packet was DNAT'ed to a device in the same bridge
 *    port group as it was received on. We can still bridge
 *    the packet.
 * 2. The packet was DNAT'ed to a different device, either
 *    a non-bridged device or another bridge port group.
 *    The packet will need to be routed.
 *
 * The correct way of distinguishing between these two cases is to
 * call ip_route_input() and to look at skb->dst->dev, which is
 * changed to the destination device if ip_route_input() succeeds.
 *
 * Let's first consider the case that ip_route_input() succeeds:
 *
 * If the output device equals the logical bridge device the packet
 * came in on, we can consider this bridging. The corresponding MAC
 * address will be obtained in br_nf_pre_routing_finish_bridge.
 * Otherwise, the packet is considered to be routed and we just
 * change the destination MAC address so that the packet will
 * later be passed up to the IP stack to be routed. For a redirected
 * packet, ip_route_input() will give back the localhost as output device,
 * which differs from the bridge device.
 *
 * Let's now consider the case that ip_route_input() fails:
 *
 * This can be because the destination address is martian, in which case
 * the packet will be dropped.
 * If IP forwarding is disabled, ip_route_input() will fail, while
 * ip_route_output_key() can return success. The source
 * address for ip_route_output_key() is set to zero, so ip_route_output_key()
 * thinks we're handling a locally generated packet and won't care
 * if IP forwarding is enabled. If the output device equals the logical bridge
 * device, we proceed as if ip_route_input() succeeded. If it differs from the
 * logical bridge port or if ip_route_output_key() fails we drop the packet.
 */
static int br_nf_pre_routing_finish(struct sk_buff *skb)
{
	struct net_device *dev = skb->dev;
	struct iphdr *iph = ip_hdr(skb);
	struct nf_bridge_info *nf_bridge = skb->nf_bridge;
	struct rtable *rt;
	int err;

	if (nf_bridge->mask & BRNF_PKT_TYPE) {
		skb->pkt_type = PACKET_OTHERHOST;
		nf_bridge->mask ^= BRNF_PKT_TYPE;
	}
	nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;
	if (dnat_took_place(skb)) {
		if ((err = ip_route_input(skb, iph->daddr, iph->saddr, iph->tos, dev))) {
			struct flowi fl = {
				.fl4_dst = iph->daddr,
				.fl4_tos = RT_TOS(iph->tos),
			};
			struct in_device *in_dev = __in_dev_get_rcu(dev);

			/* If err equals -EHOSTUNREACH the error is due to a
			 * martian destination or due to the fact that
			 * forwarding is disabled. For most martian packets,
			 * ip_route_output_key() will fail. It won't fail for 2 types of
			 * martian destinations: loopback destinations and destination
			 * 0.0.0.0. In both cases the packet will be dropped because the
			 * destination is the loopback device and not the bridge. */
			if (err != -EHOSTUNREACH || !in_dev || IN_DEV_FORWARD(in_dev))
				goto free_skb;

			if (!ip_route_output_key(dev_net(dev), &rt, &fl)) {
				/* - Bridged-and-DNAT'ed traffic doesn't
				 *   require ip_forwarding. */
				if (((struct dst_entry *)rt)->dev == dev) {
					skb_dst_set(skb, (struct dst_entry *)rt);
					goto bridged_dnat;
				}
				dst_release((struct dst_entry *)rt);
			}
free_skb:
			kfree_skb(skb);
			return 0;
		} else {
			if (skb_dst(skb)->dev == dev) {
bridged_dnat:
				skb->dev = nf_bridge->physindev;
				nf_bridge_update_protocol(skb);
				nf_bridge_push_encap_header(skb);
				NF_HOOK_THRESH(NFPROTO_BRIDGE,
					       NF_BR_PRE_ROUTING,
					       skb, skb->dev, NULL,
					       br_nf_pre_routing_finish_bridge,
					       1);
				return 0;
			}
			memcpy(eth_hdr(skb)->h_dest, dev->dev_addr, ETH_ALEN);
			skb->pkt_type = PACKET_HOST;
		}
	} else {
开发者ID:ANFS,项目名称:ANFS-kernel,代码行数:98,代码来源:br_netfilter.c


示例6: ipv6_defrag

static unsigned int ipv6_defrag(const struct nf_hook_ops *ops,
				struct sk_buff *skb,
				const struct net_device *in,
				const struct net_device *out,
				int (*okfn)(struct sk_buff *))
{
	struct sk_buff *reasm;

#if IS_ENABLED(CONFIG_NF_CONNTRACK)
	/* Previously seen (loopback)?	*/
	if (skb->nfct && !nf_ct_is_template((struct nf_conn *)skb->nfct))
		return NF_ACCEPT;
#endif

	reasm = nf_ct_frag6_gather(skb, nf_ct6_defrag_user(ops->hooknum, skb));
	/* queued */
	if (reasm == NULL)
		return NF_STOLEN;

	/* error occurred or not fragmented */
	if (reasm == skb)
		return NF_ACCEPT;

	nf_ct_frag6_consume_orig(reasm);

	NF_HOOK_THRESH(NFPROTO_IPV6, ops->hooknum, reasm,
		       (struct net_device *) in, (struct net_device *) out,
		       okfn, NF_IP6_PRI_CONNTRACK_DEFRAG + 1);

	return NF_STOLEN;
}
开发者ID:383530895,项目名称:linux,代码行数:31,代码来源:nf_defrag_ipv6_hooks.c


示例7: br_nf_forward_finish

/* PF_BRIDGE/FORWARD *************************************************/
static int br_nf_forward_finish(struct sk_buff *skb)
{
	struct nf_bridge_info *nf_bridge = skb->nf_bridge;
	struct net_device *in;

	if (!IS_ARP(skb) && !IS_VLAN_ARP(skb)) {
		int frag_max_size;

		if (skb->protocol == htons(ETH_P_IP)) {
			frag_max_size = IPCB(skb)->frag_max_size;
			BR_INPUT_SKB_CB(skb)->frag_max_size = frag_max_size;
		}

		in = nf_bridge->physindev;
		if (nf_bridge->mask & BRNF_PKT_TYPE) {
			skb->pkt_type = PACKET_OTHERHOST;
			nf_bridge->mask ^= BRNF_PKT_TYPE;
		}
		nf_bridge_update_protocol(skb);
	} else {
		in = *((struct net_device **)(skb->cb));
	}
	nf_bridge_push_encap_header(skb);

	NF_HOOK_THRESH(NFPROTO_BRIDGE, NF_BR_FORWARD, skb, in,
		       skb->dev, br_forward_finish, 1);
	return 0;
}
开发者ID:iamroot12a,项目名称:kernel,代码行数:29,代码来源:br_netfilter.c


示例8: br_nf_pre_routing_finish

static int br_nf_pre_routing_finish(struct sk_buff *skb)
{
	struct net_device *dev = skb->dev;
	struct iphdr *iph = skb->nh.iph;
	struct nf_bridge_info *nf_bridge = skb->nf_bridge;

#ifdef CONFIG_NETFILTER_DEBUG
	skb->nf_debug ^= (1 << NF_BR_PRE_ROUTING);
#endif

	if (nf_bridge->mask & BRNF_PKT_TYPE) {
		skb->pkt_type = PACKET_OTHERHOST;
		nf_bridge->mask ^= BRNF_PKT_TYPE;
	}
	nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;

	if (dnat_took_place(skb)) {
		if (ip_route_input(skb, iph->daddr, iph->saddr, iph->tos,
		    dev)) {
			struct rtable *rt;
			struct flowi fl = { .nl_u = 
			{ .ip4_u = { .daddr = iph->daddr, .saddr = 0 ,
				     .tos = RT_TOS(iph->tos)} }, .proto = 0};

			if (!ip_route_output_key(&rt, &fl)) {
				/* Bridged-and-DNAT'ed traffic doesn't
				 * require ip_forwarding. */
				if (((struct dst_entry *)rt)->dev == dev) {
					skb->dst = (struct dst_entry *)rt;
					goto bridged_dnat;
				}
				__br_dnat_complain();
				dst_release((struct dst_entry *)rt);
			}
			kfree_skb(skb);
			return 0;
		} else {
			if (skb->dst->dev == dev) {
bridged_dnat:
				/* Tell br_nf_local_out this is a
				 * bridged frame */
				nf_bridge->mask |= BRNF_BRIDGED_DNAT;
				skb->dev = nf_bridge->physindev;
				if (skb->protocol ==
				    __constant_htons(ETH_P_8021Q)) {
					skb_push(skb, VLAN_HLEN);
					skb->nh.raw -= VLAN_HLEN;
				}
				NF_HOOK_THRESH(PF_BRIDGE, NF_BR_PRE_ROUTING,
					       skb, skb->dev, NULL,
					       br_nf_pre_routing_finish_bridge,
					       1);
				return 0;
			}
			memcpy(eth_hdr(skb)->h_dest, dev->dev_addr,
			       ETH_ALEN);
			skb->pkt_type = PACKET_HOST;
		}
	} else {
开发者ID:GodFox,项目名称:magx_kernel_xpixl,代码行数:59,代码来源:br_netfilter.c


示例9: netmode_bridge_rcv_finish

void netmode_bridge_rcv_finish(struct sk_buff *skb,
					int (*okfn)(struct sk_buff *))
{
    netmode_skb_header_revert(skb);

    NF_HOOK_THRESH(PF_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL, okfn, -349);

    return;
}
开发者ID:millken,项目名称:zhuxianB30,代码行数:9,代码来源:netmode_entries.c


示例10: netmode_br_transparent_rcv_finish

s32 netmode_br_transparent_rcv_finish(struct sk_buff *skb,
					int (*okfn)(struct sk_buff *))
{
    struct iphdr *iph;
    u32 br_ip;

    netmode_skb_header_revert(skb);
   
    if(skb->protocol == ETH_P_PPP_SES)
    {
        skb_push(skb, skb->data - skb->mac.raw - 14);
        skb_xmit(skb);
        return NF_STOLEN;
    }
    
    if(ETH_P_IP != skb->protocol || 0 != br_get_ip(skb, &br_ip))
    {
		goto BR_CONTINUE;
    }

    if(0 == br_ip)
    {
        if(skb->dev->priv_flags & IFF_802_1Q_VLAN)
        {
            skb = conplat_vlan_skb_recv_put_tag(skb, VLAN_DEV_INFO(skb->dev)->vlan_id);
        }
        
        skb_xmit(skb);
        return NF_STOLEN;
    }

    iph = skb->nh.iph;

    if (likely(iph->saddr != br_ip && iph->daddr != br_ip
        && (u32)WEBAUTH_SERVER_ADDR_U32 != iph->saddr && (u32)WEBAUTH_SERVER_ADDR_U32 != iph->daddr) )
    {
        if ( skb->dev->priv_flags&IFF_802_1Q_VLAN )
        {
            skb = conplat_vlan_skb_recv_put_tag(skb, VLAN_DEV_INFO(skb->dev)->vlan_id);
        }

        skb_xmit(skb);
        return NF_STOLEN;
    }

BR_CONTINUE:
    NF_HOOK_THRESH(PF_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL,okfn,-349);

    return NF_STOLEN;
}
开发者ID:millken,项目名称:zhuxianB30,代码行数:50,代码来源:netmode_entries.c


示例11: netmode_gateway_rcv_finish

void netmode_gateway_rcv_finish(struct sk_buff *skb, int (*okfn)(struct sk_buff *))
{
    skb_push(skb, (u32)(skb->data - skb->h.raw));
    skb_push(skb, (u32)(skb->data - skb->nh.raw));

    skb->protocol = (eth_hdr(skb))->h_proto;
    if(ns_mode == NS_MODE)
    {
		okfn(skb);	
    }
    else
    {
    	NF_HOOK_THRESH(PF_INET, NF_IP_FORWARD, skb, skb->dev, NULL, okfn, 2);
	}
	
    return;
}
开发者ID:millken,项目名称:zhuxianB30,代码行数:17,代码来源:netmode_entries.c


示例12: nf_ct_frag6_output

void nf_ct_frag6_output(unsigned int hooknum, struct sk_buff *skb,
			struct net_device *in, struct net_device *out,
			int (*okfn)(struct sk_buff *))
{
	struct sk_buff *s, *s2;

	for (s = NFCT_FRAG6_CB(skb)->orig; s;) {
		nf_conntrack_put_reasm(s->nfct_reasm);
		nf_conntrack_get_reasm(skb);
		s->nfct_reasm = skb;

		s2 = s->next;
		NF_HOOK_THRESH(PF_INET6, hooknum, s, in, out, okfn,
			       NF_IP6_PRI_CONNTRACK_DEFRAG + 1);
		s = s2;
	}
	nf_conntrack_put_reasm(skb);
}
开发者ID:BackupTheBerlios,项目名称:tew632-brp-svn,代码行数:18,代码来源:nf_conntrack_reasm.c


示例13: br_nf_pre_routing_finish_ipv6

/* Undo the changes made for ip6tables PREROUTING and continue the
 * bridge PRE_ROUTING hook. */
static int br_nf_pre_routing_finish_ipv6(struct sk_buff *skb)
{
	struct nf_bridge_info *nf_bridge = skb->nf_bridge;

	if (nf_bridge->mask & BRNF_PKT_TYPE) {
		skb->pkt_type = PACKET_OTHERHOST;
		nf_bridge->mask ^= BRNF_PKT_TYPE;
	}
	nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;

	skb->dst = (struct dst_entry *)&__fake_rtable;
	dst_hold(skb->dst);

	skb->dev = nf_bridge->physindev;
	nf_bridge_push_encap_header(skb);
	NF_HOOK_THRESH(PF_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL,
		       br_handle_frame_finish, 1);

	return 0;
}
开发者ID:NikhilNJ,项目名称:screenplay-dx,代码行数:22,代码来源:br_netfilter.c


示例14: br_nf_pre_routing_finish

/* This requires some explaining. If DNAT has taken place,
 * we will need to fix up the destination Ethernet address.
 * This is also true when SNAT takes place (for the reply direction).
 *
 * There are two cases to consider:
 * 1. The packet was DNAT'ed to a device in the same bridge
 *    port group as it was received on. We can still bridge
 *    the packet.
 * 2. The packet was DNAT'ed to a different device, either
 *    a non-bridged device or another bridge port group.
 *    The packet will need to be routed.
 *
 * The correct way of distinguishing between these two cases is to
 * call ip_route_input() and to look at skb->dst->dev, which is
 * changed to the destination device if ip_route_input() succeeds.
 *
 * Let's first consider the case that ip_route_input() succeeds:
 *
 * If the output device equals the logical bridge device the packet
 * came in on, we can consider this bridging. The corresponding MAC
 * address will be obtained in br_nf_pre_routing_finish_bridge.
 * Otherwise, the packet is considered to be routed and we just
 * change the destination MAC address so that the packet will
 * later be passed up to the IP stack to be routed. For a redirected
 * packet, ip_route_input() will give back the localhost as output device,
 * which differs from the bridge device.
 *
 * Let's now consider the case that ip_route_input() fails:
 *
 * This can be because the destination address is martian, in which case
 * the packet will be dropped.
 * If IP forwarding is disabled, ip_route_input() will fail, while
 * ip_route_output_key() can return success. The source
 * address for ip_route_output_key() is set to zero, so ip_route_output_key()
 * thinks we're handling a locally generated packet and won't care
 * if IP forwarding is enabled. If the output device equals the logical bridge
 * device, we proceed as if ip_route_input() succeeded. If it differs from the
 * logical bridge port or if ip_route_output_key() fails we drop the packet.
 */
static int br_nf_pre_routing_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
{
	struct net_device *dev = skb->dev;
	struct iphdr *iph = ip_hdr(skb);
	struct nf_bridge_info *nf_bridge = nf_bridge_info_get(skb);
	struct rtable *rt;
	int err;

	nf_bridge->frag_max_size = IPCB(skb)->frag_max_size;

	if (nf_bridge->pkt_otherhost) {
		skb->pkt_type = PACKET_OTHERHOST;
		nf_bridge->pkt_otherhost = false;
	}
	nf_bridge->in_prerouting = 0;
	if (br_nf_ipv4_daddr_was_changed(skb, nf_bridge)) {
		if ((err = ip_route_input(skb, iph->daddr, iph->saddr, iph->tos, dev))) {
			struct in_device *in_dev = __in_dev_get_rcu(dev);

			/* If err equals -EHOSTUNREACH the error is due to a
			 * martian destination or due to the fact that
			 * forwarding is disabled. For most martian packets,
			 * ip_route_output_key() will fail. It won't fail for 2 types of
			 * martian destinations: loopback destinations and destination
			 * 0.0.0.0. In both cases the packet will be dropped because the
			 * destination is the loopback device and not the bridge. */
			if (err != -EHOSTUNREACH || !in_dev || IN_DEV_FORWARD(in_dev))
				goto free_skb;

			rt = ip_route_output(net, iph->daddr, 0,
					     RT_TOS(iph->tos), 0);
			if (!IS_ERR(rt)) {
				/* - Bridged-and-DNAT'ed traffic doesn't
				 *   require ip_forwarding. */
				if (rt->dst.dev == dev) {
					skb_dst_set(skb, &rt->dst);
					goto bridged_dnat;
				}
				ip_rt_put(rt);
			}
free_skb:
			kfree_skb(skb);
			return 0;
		} else {
			if (skb_dst(skb)->dev == dev) {
bridged_dnat:
				skb->dev = nf_bridge->physindev;
				nf_bridge_update_protocol(skb);
				nf_bridge_push_encap_header(skb);
				NF_HOOK_THRESH(NFPROTO_BRIDGE,
					       NF_BR_PRE_ROUTING,
					       net, sk, skb, skb->dev, NULL,
					       br_nf_pre_routing_finish_bridge,
					       1);
				return 0;
			}
			ether_addr_copy(eth_hdr(skb)->h_dest, dev->dev_addr);
			skb->pkt_type = PACKET_HOST;
		}
	} else {
		rt = bridge_parent_rtable(nf_bridge->physindev);
//.........这里部分代码省略.........
开发者ID:545191228,项目名称:linux,代码行数:101,代码来源:br_netfilter_hooks.c


示例15: br_nf_pre_routing_finish

static int br_nf_pre_routing_finish(struct sk_buff *skb)
{
	struct net_device *dev = skb->dev;
	struct iphdr *iph = ip_hdr(skb);
	struct nf_bridge_info *nf_bridge = skb->nf_bridge;
	int err;

	if (nf_bridge->mask & BRNF_PKT_TYPE) {
		skb->pkt_type = PACKET_OTHERHOST;
		nf_bridge->mask ^= BRNF_PKT_TYPE;
	}
	nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;
	if (dnat_took_place(skb)) {
		if ((err = ip_route_input(skb, iph->daddr, iph->saddr, iph->tos, dev))) {
			struct rtable *rt;
			struct flowi fl = {
				.nl_u = {
					.ip4_u = {
						 .daddr = iph->daddr,
						 .saddr = 0,
						 .tos = RT_TOS(iph->tos) },
				},
				.proto = 0,
			};
			struct in_device *in_dev = in_dev_get(dev);

			/* If err equals -EHOSTUNREACH the error is due to a
			 * martian destination or due to the fact that
			 * forwarding is disabled. For most martian packets,
			 * ip_route_output_key() will fail. It won't fail for 2 types of
			 * martian destinations: loopback destinations and destination
			 * 0.0.0.0. In both cases the packet will be dropped because the
			 * destination is the loopback device and not the bridge. */
			if (err != -EHOSTUNREACH || !in_dev || IN_DEV_FORWARD(in_dev))
				goto free_skb;

			if (!ip_route_output_key(dev_net(dev), &rt, &fl)) {
				/* - Bridged-and-DNAT'ed traffic doesn't
				 *   require ip_forwarding. */
				if (((struct dst_entry *)rt)->dev == dev) {
					skb->dst = (struct dst_entry *)rt;
					goto bridged_dnat;
				}
				/* we are sure that forwarding is disabled, so printing
				 * this message is no problem. Note that the packet could
				 * still have a martian destination address, in which case
				 * the packet could be dropped even if forwarding were enabled */
				__br_dnat_complain();
				dst_release((struct dst_entry *)rt);
			}
free_skb:
			kfree_skb(skb);
			return 0;
		} else {
			if (skb->dst->dev == dev) {
bridged_dnat:
				/* Tell br_nf_local_out this is a
				 * bridged frame */
				nf_bridge->mask |= BRNF_BRIDGED_DNAT;
				skb->dev = nf_bridge->physindev;
				nf_bridge_push_encap_header(skb);
				NF_HOOK_THRESH(PF_BRIDGE, NF_BR_PRE_ROUTING,
					       skb, skb->dev, NULL,
					       br_nf_pre_routing_finish_bridge,
					       1);
				return 0;
			}
			memcpy(eth_hdr(skb)->h_dest, dev->dev_addr, ETH_ALEN);
			skb->pkt_type = PACKET_HOST;
		}
	} else {
开发者ID:mecke,项目名称:linux-2.6,代码行数:71,代码来源:br_netfilter.c



注:本文中的NF_HOOK_THRESH函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ NGL_ASSERT函数代码示例发布时间:2022-05-30
下一篇:
C++ NF_HOOK函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap