C++ NG_SEND_MSG_HOOK函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中NG_SEND_MSG_HOOK函数的典型用法代码示例。如果您正苦于以下问题：C++ NG_SEND_MSG_HOOK函数的具体用法？C++ NG_SEND_MSG_HOOK怎么用？C++ NG_SEND_MSG_HOOK使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了NG_SEND_MSG_HOOK函数的11个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ng_hci_lp_enc_change

int
ng_hci_lp_enc_change(ng_hci_unit_con_p con, int status)
{
	ng_hci_unit_p		 unit = con->unit;
	struct ng_mesg		*msg = NULL;
	ng_hci_lp_enc_change_ep	*ep = NULL;
	int			 error;


	if (con->link_type != NG_HCI_LINK_SCO) {
		if (unit->acl != NULL && NG_HOOK_IS_VALID(unit->acl)) {
			NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_ENC_CHG, 
				sizeof(*ep), M_NOWAIT);
			if (msg != NULL) {
				ep = (ng_hci_lp_enc_change_ep *) msg->data;
				ep->status = status;
				ep->link_type = con->link_type;
				ep->con_handle = con->con_handle;

				NG_SEND_MSG_HOOK(error, unit->node, msg,
					unit->acl, 0);
			}
		} else
			NG_HCI_INFO(
"%s: %s - ACL hook not valid, hook=%p\n",
				__func__, NG_NODE_NAME(unit->node), unit->acl);

	}
	return (0);
} /* ng_hci_lp_con_cfm */

开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:30，代码来源:ng_hci_ulpi.c

示例2: ng_l2cap_lp_qos_req

int
ng_l2cap_lp_qos_req(ng_l2cap_p l2cap, u_int16_t con_handle,
		ng_l2cap_flow_p flow)
{
	struct ng_mesg		*msg = NULL;
	ng_hci_lp_qos_req_ep	*ep = NULL;
	ng_l2cap_con_p		 con = NULL;
	int			 error = 0;

	/* Verify that we have this connection */
	con = ng_l2cap_con_by_handle(l2cap, con_handle);
	if (con == NULL) {
		NG_L2CAP_ERR(
"%s: %s - unexpected LP_QoSSetupReq event. " \
"Connection does not exist, con_handle=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), con_handle);

		return (ENOENT);
	}

	/* Verify connection state */
	if (con->state != NG_L2CAP_CON_OPEN) {
		NG_L2CAP_ERR(
"%s: %s - unexpected LP_QoSSetupReq event. " \
"Invalid connection state, state=%d, con_handle=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), con->state,
			con->con_handle);

		return (EINVAL);
	}

	/* Check if lower layer protocol is still connected */
	if (l2cap->hci == NULL || NG_HOOK_NOT_VALID(l2cap->hci)) {
		NG_L2CAP_ERR(
"%s: %s - hook \"%s\" is not connected or valid",
			__func__, NG_NODE_NAME(l2cap->node), NG_L2CAP_HOOK_HCI);

		return (ENOTCONN);
	}

	/* Create and send LP_QoSSetupReq event */
	NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_QOS_REQ,
		sizeof(*ep), M_NOWAIT);
	if (msg == NULL)
		return (ENOMEM);

	ep = (ng_hci_lp_qos_req_ep *) (msg->data);
	ep->con_handle = con_handle;
	ep->flags = flow->flags;
	ep->service_type = flow->service_type;
	ep->token_rate = flow->token_rate;
	ep->peak_bandwidth = flow->peak_bandwidth;
	ep->latency = flow->latency;
	ep->delay_variation = flow->delay_variation;

	NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->hci, 0);
	
	return (error);
} /* ng_l2cap_lp_con_req */

开发者ID:AhmadTux，项目名称:freebsd，代码行数:59，代码来源:ng_l2cap_llpi.c

示例3: ng_l2cap_l2ca_con_rsp

int
ng_l2cap_l2ca_con_rsp(ng_l2cap_chan_p ch, u_int32_t token, u_int16_t result,
		u_int16_t status)
{
	ng_l2cap_p		 l2cap = ch->con->l2cap;
	struct ng_mesg		*msg = NULL;
	ng_l2cap_l2ca_con_op	*op = NULL;
	int			 error = 0;

	/* Check if upstream hook is connected and valid */
	if (l2cap->l2c == NULL || NG_HOOK_NOT_VALID(l2cap->l2c)) {
		NG_L2CAP_ERR(
"%s: %s - unable to send L2CA_Connect response message. " \
"Hook is not connected or valid, psm=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), ch->psm);

		return (ENOTCONN);
	}

	/* Create and send L2CA_Connect response message */
	NG_MKMESSAGE(msg, NGM_L2CAP_COOKIE, NGM_L2CAP_L2CA_CON,
		sizeof(*op), M_NOWAIT);
	if (msg == NULL)
		error = ENOMEM;
	else {
		msg->header.token = token;
		msg->header.flags |= NGF_RESP;

		op = (ng_l2cap_l2ca_con_op *)(msg->data);
		
		/*
		 * XXX Spec. says we should only populate LCID when result == 0
		 * What about PENDING? What the heck, for now always populate
		 * LCID :)
		 */
		if(ch->scid == NG_L2CAP_ATT_CID){
			op->idtype = NG_L2CAP_L2CA_IDTYPE_ATT;
			op->lcid = ch->con->con_handle;
		}else if(ch->scid == NG_L2CAP_SMP_CID){
			op->idtype = NG_L2CAP_L2CA_IDTYPE_SMP;
			op->lcid = ch->con->con_handle;
		}else{
			op->idtype = (ch->con->linktype == NG_HCI_LINK_ACL)?
				NG_L2CAP_L2CA_IDTYPE_BREDR :
				NG_L2CAP_L2CA_IDTYPE_LE;
			op->lcid = ch->scid;				
		}
		op->encryption = ch->con->encryption;
		op->result = result;
		op->status = status;

		NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->l2c, 0);
	}

	return (error);
} /* ng_l2cap_l2ca_con_rsp */

开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:56，代码来源:ng_l2cap_ulpi.c

示例4: ng_l2cap_lp_con_req

int
ng_l2cap_lp_con_req(ng_l2cap_p l2cap, bdaddr_p bdaddr)
{
	struct ng_mesg		*msg = NULL;
	ng_hci_lp_con_req_ep	*ep = NULL;
	ng_l2cap_con_p		 con = NULL;
	int			 error = 0;

	/* Verify that we DO NOT have connection to the remote unit */
	con = ng_l2cap_con_by_addr(l2cap, bdaddr);
	if (con != NULL) {
		NG_L2CAP_ALERT(
"%s: %s - unexpected LP_ConnectReq event. " \
"Connection already exists, state=%d, con_handle=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), con->state, 
			con->con_handle);

		return (EEXIST);
	}

	/* Check if lower layer protocol is still connected */
	if (l2cap->hci == NULL || NG_HOOK_NOT_VALID(l2cap->hci)) {
		NG_L2CAP_ERR(
"%s: %s - hook \"%s\" is not connected or valid\n",
			__func__, NG_NODE_NAME(l2cap->node), NG_L2CAP_HOOK_HCI);

		return (ENOTCONN);
	}

	/* Create and intialize new connection descriptor */
	con = ng_l2cap_new_con(l2cap, bdaddr);
	if (con == NULL)
		return (ENOMEM);

	/* Create and send LP_ConnectReq event */
	NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_CON_REQ,
		sizeof(*ep), M_NOWAIT);
	if (msg == NULL) {
		ng_l2cap_free_con(con);

		return (ENOMEM);
	}

	ep = (ng_hci_lp_con_req_ep *) (msg->data);
	bcopy(bdaddr, &ep->bdaddr, sizeof(ep->bdaddr));
	ep->link_type = NG_HCI_LINK_ACL;

	con->state = NG_L2CAP_W4_LP_CON_CFM;
	ng_l2cap_lp_timeout(con);

	NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->hci, NULL);
	if (error != 0)
		ng_l2cap_free_con(con); /* will remove timeout */
	
	return (error);
} /* ng_l2cap_lp_con_req */

开发者ID:MarginC，项目名称:kame，代码行数:56，代码来源:ng_l2cap_llpi.c

示例5: ng_l2cap_l2ca_write_rsp

int
ng_l2cap_l2ca_write_rsp(ng_l2cap_chan_p ch, u_int32_t token, u_int16_t result,
		u_int16_t length)
{
	ng_l2cap_p		 l2cap = ch->con->l2cap;
	struct ng_mesg		*msg = NULL;
	ng_l2cap_l2ca_write_op	*op = NULL;
	int			 error = 0;

	/* Check if upstream hook is connected and valid */
	if (l2cap->l2c == NULL || NG_HOOK_NOT_VALID(l2cap->l2c)) {
		NG_L2CAP_ERR(
"%s: %s - unable to send L2CA_WriteRsp message. " \
"Hook is not connected or valid, psm=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), ch->psm);

		return (ENOTCONN);
	}

	/* Create and send L2CA_WriteRsp message */
	NG_MKMESSAGE(msg, NGM_L2CAP_COOKIE, NGM_L2CAP_L2CA_WRITE,
			sizeof(*op), M_NOWAIT);
	if (msg == NULL)
		error = ENOMEM;
	else {
		msg->header.token = token;
		msg->header.flags |= NGF_RESP;

		op = (ng_l2cap_l2ca_write_op *)(msg->data);
		op->result = result;
		op->length = length;
		if(ch->scid == NG_L2CAP_ATT_CID){
			op->idtype = NG_L2CAP_L2CA_IDTYPE_ATT;
			op->lcid = ch->con->con_handle;
		}else if(ch->scid == NG_L2CAP_SMP_CID){
			op->idtype = NG_L2CAP_L2CA_IDTYPE_SMP;
			op->lcid = ch->con->con_handle;
		}else{
			op->idtype = (ch->con->linktype == NG_HCI_LINK_ACL)?
				NG_L2CAP_L2CA_IDTYPE_BREDR :
				NG_L2CAP_L2CA_IDTYPE_LE;
			op->lcid = ch->scid;				
			
		}
		NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->l2c, 0);
	}

	return (error);
} /* ng_l2cap_l2ca_write_rsp */

开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:49，代码来源:ng_l2cap_ulpi.c

示例6: ng_hci_node_is_up

void
ng_hci_node_is_up(node_p node, hook_p hook, void *arg1, int arg2)
{
	ng_hci_unit_p		 unit = NULL;
	struct ng_mesg		*msg = NULL;
	ng_hci_node_up_ep	*ep = NULL;
	int			 error;

	if (node == NULL || NG_NODE_NOT_VALID(node) ||
	    hook == NULL || NG_HOOK_NOT_VALID(hook))
		return;

	unit = (ng_hci_unit_p) NG_NODE_PRIVATE(node);
	if ((unit->state & NG_HCI_UNIT_READY) != NG_HCI_UNIT_READY)
		return;

	if (hook != unit->acl && hook != unit->sco)
		return;

	NG_MKMESSAGE(msg,NGM_HCI_COOKIE,NGM_HCI_NODE_UP,sizeof(*ep),M_NOWAIT);
	if (msg != NULL) {
		ep = (ng_hci_node_up_ep *)(msg->data);

		if (hook == unit->acl) {
			NG_HCI_BUFF_ACL_SIZE(unit->buffer, ep->pkt_size);
			NG_HCI_BUFF_ACL_TOTAL(unit->buffer, ep->num_pkts);
		} else {
			NG_HCI_BUFF_SCO_SIZE(unit->buffer, ep->pkt_size);
			NG_HCI_BUFF_SCO_TOTAL(unit->buffer, ep->num_pkts);
		} 

		bcopy(&unit->bdaddr, &ep->bdaddr, sizeof(ep->bdaddr));

		NG_SEND_MSG_HOOK(error, node, msg, hook, 0);
	} else
		error = ENOMEM;

	if (error != 0)
		NG_HCI_INFO(
"%s: %s - failed to send NODE_UP message to hook \"%s\", error=%d\n",
			__func__, NG_NODE_NAME(unit->node), 
			NG_HOOK_NAME(hook), error);
} /* ng_hci_node_is_up */

开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:43，代码来源:ng_hci_misc.c

示例7: ng_hci_lp_con_ind

int
ng_hci_lp_con_ind(ng_hci_unit_con_p con, u_int8_t *uclass)
{
	ng_hci_unit_p		 unit = con->unit;
	struct ng_mesg		*msg = NULL;
	ng_hci_lp_con_ind_ep	*ep = NULL;
	hook_p			 hook = NULL;
	int			 error = 0;

	/*
	 * Connection_Request event is generated for specific link type.
	 * Use link_type to select upstream hook.
	 */

	if (con->link_type == NG_HCI_LINK_ACL)
		hook = unit->acl;
	else
		hook = unit->sco;

	if (hook != NULL && NG_HOOK_IS_VALID(hook)) {
		NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_CON_IND, 
			sizeof(*ep), M_NOWAIT);
		if (msg == NULL)
			return (ENOMEM);

		ep = (ng_hci_lp_con_ind_ep *)(msg->data);
		ep->link_type = con->link_type;
		bcopy(uclass, ep->uclass, sizeof(ep->uclass));
		bcopy(&con->bdaddr, &ep->bdaddr, sizeof(ep->bdaddr));

		NG_SEND_MSG_HOOK(error, unit->node, msg, hook, 0);
	} else {
		NG_HCI_WARN(
"%s: %s - Upstream hook is not connected or not valid, hook=%p\n",
			__func__, NG_NODE_NAME(unit->node), hook);

		error = ENOTCONN;
	}

	return (error);
} /* ng_hci_lp_con_ind */

开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:41，代码来源:ng_hci_ulpi.c

示例8: ng_l2cap_l2ca_discon_ind

int
ng_l2cap_l2ca_discon_ind(ng_l2cap_chan_p ch)
{
	ng_l2cap_p			 l2cap = ch->con->l2cap;
	struct ng_mesg			*msg = NULL;
	ng_l2cap_l2ca_discon_ind_ip	*ip = NULL;
	int				 error = 0;

	/* Check if upstream hook is connected and valid */
	if (l2cap->l2c == NULL || NG_HOOK_NOT_VALID(l2cap->l2c)) {
		NG_L2CAP_ERR(
"%s: %s - unable to send L2CA_DisconnectInd message. " \
"Hook is not connected or valid, psm=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), ch->psm);

		return (ENOTCONN);
	}

	/* Create and send L2CA_DisconnectInd message */
	NG_MKMESSAGE(msg, NGM_L2CAP_COOKIE, NGM_L2CAP_L2CA_DISCON_IND,
		sizeof(*ip), M_NOWAIT);
	if (msg == NULL)
		error = ENOMEM;
	else {
		ip = (ng_l2cap_l2ca_discon_ind_ip *)(msg->data);
		ip->idtype = ch->idtype;
		if(ch->idtype == NG_L2CAP_L2CA_IDTYPE_ATT||
		   ch->idtype == NG_L2CAP_L2CA_IDTYPE_SMP)
			ip->lcid = ch->con->con_handle;
		else
			ip->lcid = ch->scid;
		
		NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->l2c, 0);
	} 

	return (error);
} /* ng_l2cap_l2ca_discon_ind */

开发者ID:FreeBSDFoundation，项目名称:freebsd，代码行数:37，代码来源:ng_l2cap_ulpi.c

示例9: ng_vlan_rcvmsg


//.........这里部分代码省略.........
				    " hook %s VID = %us, must be: %i\n",
				    __func__, NG_HOOK_NAME(hook),
				    (uint16_t)EVL_VLANOFTAG(hook_data), i));

#ifdef	NG_VLAN_USE_OLD_VLAN_NAME
				vf->vlan = i;
#endif
				vf->vid = i;
				vf->pcp = EVL_PRIOFTAG(hook_data);
				vf->cfi = EVL_CFIOFTAG(hook_data);
				strncpy(vf->hook_name,
				    NG_HOOK_NAME(hook), NG_HOOKSIZ);
				vf ++;
				t->n ++;
			}
			break;
		case NGM_VLAN_GET_DECAP:
			NG_MKRESPONSE(resp, msg, sizeof(uint32_t), M_NOWAIT);
			if (resp == NULL) {
				error = ENOMEM;
				break;
			}
			(*((uint32_t *)resp->data)) = priv->decap_enable;
			break;
		case NGM_VLAN_SET_DECAP:
			if (msg->header.arglen != sizeof(uint32_t)) {
				error = EINVAL;
				break;
			}
			priv->decap_enable = (*((uint32_t *)msg->data));
			break;
		case NGM_VLAN_GET_ENCAP:
			NG_MKRESPONSE(resp, msg, sizeof(uint32_t), M_NOWAIT);
			if (resp == NULL) {
				error = ENOMEM;
				break;
			}
			(*((uint32_t *)resp->data)) = priv->encap_enable;
			break;
		case NGM_VLAN_SET_ENCAP:
			if (msg->header.arglen != sizeof(uint32_t)) {
				error = EINVAL;
				break;
			}
			priv->encap_enable = (*((uint32_t *)msg->data));
			break;
		case NGM_VLAN_GET_ENCAP_PROTO:
			NG_MKRESPONSE(resp, msg, sizeof(uint16_t), M_NOWAIT);
			if (resp == NULL) {
				error = ENOMEM;
				break;
			}
			(*((uint16_t *)resp->data)) = ntohs(priv->encap_proto);
			break;
		case NGM_VLAN_SET_ENCAP_PROTO:
			if (msg->header.arglen != sizeof(uint16_t)) {
				error = EINVAL;
				break;
			}
			priv->encap_proto = htons((*((uint16_t *)msg->data)));
			break;
		default: /* Unknown command. */
			error = EINVAL;
			break;
		}
		break;
	case NGM_FLOW_COOKIE:
	    {
		struct ng_mesg *copy;

		/*
		 * Flow control messages should come only
		 * from downstream.
		 */

		if (lasthook == NULL)
			break;
		if (lasthook != priv->downstream_hook)
			break;
		/* Broadcast the event to all uplinks. */
		for (i = 0; i < (EVL_VLID_MASK + 1); i ++) {
			if (priv->vlan_hook[i] == NULL)
				continue;

			NG_COPYMESSAGE(copy, msg, M_NOWAIT);
			if (copy == NULL)
				continue;
			NG_SEND_MSG_HOOK(error, node, copy,
			    priv->vlan_hook[i], 0);
		}
		break;
	    }
	default: /* Unknown type cookie. */
		error = EINVAL;
		break;
	}
	NG_RESPOND_MSG(error, node, item, resp);
	NG_FREE_MSG(msg);
	return (error);
}

开发者ID:MattDooner，项目名称:freebsd-west，代码行数:101，代码来源:ng_vlan.c

示例10: ng_hci_lp_con_cfm

int
ng_hci_lp_con_cfm(ng_hci_unit_con_p con, int status)
{
	ng_hci_unit_p		 unit = con->unit;
	struct ng_mesg		*msg = NULL;
	ng_hci_lp_con_cfm_ep	*ep = NULL;
	int			 error;

	/*
	 * Check who wants to be notified. For ACL links both ACL and SCO
	 * upstream hooks will be notified (if required). For SCO links
	 * only SCO upstream hook will receive notification
	 */

	if (con->link_type == NG_HCI_LINK_ACL && 
	    con->flags & NG_HCI_CON_NOTIFY_ACL) {
		if (unit->acl != NULL && NG_HOOK_IS_VALID(unit->acl)) {
			NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_CON_CFM, 
				sizeof(*ep), M_NOWAIT);
			if (msg != NULL) {
				ep = (ng_hci_lp_con_cfm_ep *) msg->data;
				ep->status = status;
				ep->link_type = con->link_type;
				ep->con_handle = con->con_handle;
				bcopy(&con->bdaddr, &ep->bdaddr, 
					sizeof(ep->bdaddr));

				NG_SEND_MSG_HOOK(error, unit->node, msg,
					unit->acl, 0);
			}
		} else
			NG_HCI_INFO(
"%s: %s - ACL hook not valid, hook=%p\n",
				__func__, NG_NODE_NAME(unit->node), unit->acl);

		con->flags &= ~NG_HCI_CON_NOTIFY_ACL;
	}

	if (con->flags & NG_HCI_CON_NOTIFY_SCO) {
		if (unit->sco != NULL && NG_HOOK_IS_VALID(unit->sco)) {
			NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_CON_CFM, 
				sizeof(*ep), M_NOWAIT);
			if (msg != NULL) {
				ep = (ng_hci_lp_con_cfm_ep *) msg->data;
				ep->status = status;
				ep->link_type = con->link_type;
				ep->con_handle = con->con_handle;
				bcopy(&con->bdaddr, &ep->bdaddr, 
					sizeof(ep->bdaddr));

				NG_SEND_MSG_HOOK(error, unit->node, msg,
					unit->sco, 0);
			}
		} else
			NG_HCI_INFO(
"%s: %s - SCO hook not valid, hook=%p\n",
				__func__, NG_NODE_NAME(unit->node), unit->acl);

		con->flags &= ~NG_HCI_CON_NOTIFY_SCO;
	}

	return (0);
} /* ng_hci_lp_con_cfm */

开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:63，代码来源:ng_hci_ulpi.c

示例11: ng_l2cap_lp_con_ind

int
ng_l2cap_lp_con_ind(ng_l2cap_p l2cap, struct ng_mesg *msg)
{
	ng_hci_lp_con_ind_ep	*ep = NULL;
	ng_hci_lp_con_rsp_ep	*rp = NULL;
	struct ng_mesg		*rsp = NULL;
	ng_l2cap_con_p		 con = NULL;
	int			 error = 0;

	/* Check message */
	if (msg->header.arglen != sizeof(*ep)) {
		NG_L2CAP_ALERT(
"%s: %s - invalid LP_ConnectInd message size\n",
			__func__, NG_NODE_NAME(l2cap->node));

		return (EMSGSIZE);
	}

 	ep = (ng_hci_lp_con_ind_ep *) (msg->data);

	/* Make sure we have only one connection to the remote unit */
	con = ng_l2cap_con_by_addr(l2cap, &ep->bdaddr);
	if (con != NULL) {
		NG_L2CAP_ALERT(
"%s: %s - unexpected LP_ConnectInd event. " \
"Connection already exists, state=%d, con_handle=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), con->state, 
			con->con_handle);

		return (EEXIST);
	}

	/* Check if lower layer protocol is still connected */
	if (l2cap->hci == NULL || NG_HOOK_NOT_VALID(l2cap->hci)) {
		NG_L2CAP_ERR(
"%s: %s - hook \"%s\" is not connected or valid",
			__func__, NG_NODE_NAME(l2cap->node), NG_L2CAP_HOOK_HCI);

		return (ENOTCONN);
	}

	/* Create and intialize new connection descriptor */
	con = ng_l2cap_new_con(l2cap, &ep->bdaddr);
	if (con == NULL)
		return (ENOMEM);

	/* Create and send LP_ConnectRsp event */
	NG_MKMESSAGE(rsp, NGM_HCI_COOKIE, NGM_HCI_LP_CON_RSP,
		sizeof(*rp), M_NOWAIT);
	if (rsp == NULL) {
		ng_l2cap_free_con(con);

		return (ENOMEM);
	}

	rp = (ng_hci_lp_con_rsp_ep *)(rsp->data);
	rp->status = 0x00; /* accept connection */
	rp->link_type = NG_HCI_LINK_ACL;
	bcopy(&ep->bdaddr, &rp->bdaddr, sizeof(rp->bdaddr));

	con->state = NG_L2CAP_W4_LP_CON_CFM;
	ng_l2cap_lp_timeout(con);

	NG_SEND_MSG_HOOK(error, l2cap->node, rsp, l2cap->hci, 0);
	if (error != 0) {
		if (ng_l2cap_lp_untimeout(con) == 0)
			ng_l2cap_free_con(con);

		/*
		 * Do not free connection if ng_l2cap_lp_untimeout() failed
		 * let timeout handler deal with it. Always return error to
		 * the caller.
		 */
	}

	return (error);
} /* ng_l2cap_lp_con_ind */

开发者ID:AhmadTux，项目名称:freebsd，代码行数:77，代码来源:ng_l2cap_llpi.c

注：本文中的NG_SEND_MSG_HOOK函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ NIBLSCALE函数代码示例发布时间：2022-05-30

C++ NG_NODE_PRIVATE函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18209|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9656|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8168|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8543|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8449|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9374|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8418|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8403|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ NG_SEND_MSG_HOOK函数代码示例

示例1: ng_hci_lp_enc_change

示例2: ng_l2cap_lp_qos_req

示例3: ng_l2cap_l2ca_con_rsp

示例4: ng_l2cap_lp_con_req

示例5: ng_l2cap_l2ca_write_rsp

示例6: ng_hci_node_is_up

示例7: ng_hci_lp_con_ind

示例8: ng_l2cap_l2ca_discon_ind

示例9: ng_vlan_rcvmsg

示例10: ng_hci_lp_con_cfm

示例11: ng_l2cap_lp_con_ind

请发表评论

全部评论

上一篇：

下一篇：

chasinginfinity/ml-from-scratch: Machine

delphi线程使用

mkyong/spring3-mvc-maven-annotation-hell

床的笔顺,关于床的笔画,体会床的部首

matlab2014b安装 libSVM

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053